Search Results

Search found 1784 results on 72 pages for 'room'.

Page 21/72 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Get 5.1 surround sound from computer through a VCR config?

    - by Wedding Nails
    I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

    Read the article

  • Want to turn old Powerbook Mac into small form factor desktop

    - by Rob
    I've got an old powerbook g4. Battery is totally dead, as is the superdrive. I've looked into selling but it's worth less than it would cost to ship it safely. So I'm considering cracking it open and and taking it's parts and creating some kind of small form factor desktop, probably for the living room. I don't need an optical drive, I really just would like Mac OSX, without purchasing a Mac Mini. Anyone got any tips?

    Read the article

  • Max length of a USB Cable?

    - by Click Ok
    I want to use a very long USB cable to, for example, place a webcam in a different room. The max length that I found was 5 meters. What the max length of a USB cable and... What the max length that I can get using USB extension cables? Thanks in advance!

    Read the article

  • How can I disable the IR/Remote Control on an HP Laptop?

    - by Steve Rowe
    I've seen this happen on 2 different HP laptops now. If I try to use them in the same room as a Media Center, the MCE TV remote keeps sending commands to the laptop. This can do anything from wake it up and turn it on to just moving the selection around. There is no obvious way to disable the IR sensor or at least its response to the remote. Does anyone know how to do this?

    Read the article

  • Why is Wifi data transfer is slow?

    - by Ali Azam Rana
    I have a wifi router which was attached with my modem, and the pc was connected to the wifi router through an ethernet cable. Yesterday I moved my modem and router to another room and connected my PC with wifi through an external wifi usb dongle (tp-link tl-w722n). I noticed that the file transfer speed from my cell to PC via wifi is greatly affected. I am not clear why is this happening because although PC is now connected through wifi but the dongle supports more than 54Mbps which is still enough.

    Read the article

  • How to power off a Debian Linux box via console

    - by Luke Puplett
    Brand new to Linux. I need to turn my box off and put it in my server room. The help here and everywhere seems not to work for me: http://debianhelp.co.uk/shutdown.htm I get: lukepuplett@uktnlx01:~$ poweroff -bash: poweroff: command not found lukepuplett@uktnlx01:~$ shutdown -bash: shutdown: command not found lukepuplett@uktnlx01:~$ modprobe apm -bash: modprobe: command not found lukepuplett@uktnlx01:~$ I also tried halt, reboot, goaway, and pleasejustwork.

    Read the article

  • What to filter when providing very limited open WiFi to a small conference or meeting?

    - by Tim Farley
    Executive Summary The basic question is: if you have a very limited bandwidth WiFi to provide Internet for a small meeting of only a day or two, how do you set the filters on the router to avoid one or two users monopolizing all the available bandwidth? For folks who don't have the time to read the details below, I am NOT looking for any of these answers: Secure the router and only let a few trusted people use it Tell everyone to turn off unused services & generally police themselves Monitor the traffic with a sniffer and add filters as needed I am aware of all of that. None are appropriate for reasons that will become clear. ALSO NOTE: There is already a question concerning providing adequate WiFi at large (500 attendees) conferences here. This question concerns SMALL meetings of less than 200 people, typically with less than half that using the WiFi. Something that can be handled with a single home or small office router. Background I've used a 3G/4G router device to provide WiFi to small meetings in the past with some success. By small I mean single-room conferences or meetings on the order of a barcamp or Skepticamp or user group meeting. These meetings sometimes have technical attendees there, but not exclusively. Usually less than half to a third of the attendees will actually use the WiFi. Maximum meeting size I'm talking about is 100 to 200 people. I typically use a Cradlepoint MBR-1000 but many other devices exist, especially all-in-one units supplied by 3G and/or 4G vendors like Verizon, Sprint and Clear. These devices take a 3G or 4G internet connection and fan it out to multiple users using WiFi. One key aspect of providing net access this way is the limited bandwidth available over 3G/4G. Even with something like the Cradlepoint which can load-balance multiple radios, you are only going to achieve a few megabits of download speed and maybe a megabit or so of upload speed. That's a best case scenario. Often it is considerably slower. The goal in most of these meeting situations is to allow folks access to services like email, web, social media, chat services and so on. This is so they can live-blog or live-tweet the proceedings, or simply chat online or otherwise stay in touch (with both attendees and non-attendees) while the meeting proceeds. I would like to limit the services provided by the router to just those services that meet those needs. Problems In particular I have noticed a couple of scenarios where particular users end up abusing most of the bandwidth on the router, to the detriment of everyone. These boil into two areas: Intentional use. Folks looking at YouTube videos, downloading podcasts to their iPod, and otherwise using the bandwidth for things that really aren't appropriate in a meeting room where you should be paying attention to the speaker and/or interacting.At one meeting that we were live-streaming (over a separate, dedicated connection) via UStream, I noticed several folks in the room that had the UStream page up so they could interact with the meeting chat - apparently oblivious that they were wasting bandwidth streaming back video of something that was taking place right in front of them. Unintentional use. There are a variety of software utilities that will make extensive use of bandwidth in the background, that folks often have installed on their laptops and smartphones, perhaps without realizing.Examples: Peer to peer downloading programs such as Bittorrent that run in the background Automatic software update services. These are legion, as every major software vendor has their own, so one can easily have Microsoft, Apple, Mozilla, Adobe, Google and others all trying to download updates in the background. Security software that downloads new signatures such as anti-virus, anti-malware, etc. Backup software and other software that "syncs" in the background to cloud services. For some numbers on how much network bandwidth gets sucked up by these non-web, non-email type services, check out this recent Wired article. Apparently web, email and chat all together are less than one quarter of the Internet traffic now. If the numbers in that article are correct, by filtering out all the other stuff I should be able to increase the usefulness of the WiFi four-fold. Now, in some situations I've been able to control access using security on the router to limit it to a very small group of people (typically the organizers of the meeting). But that's not always appropriate. At an upcoming meeting I would like to run the WiFi without security and let anyone use it, because it happens at the meeting location the 4G coverage in my town is particularly excellent. In a recent test I got 10 Megabits down at the meeting site. The "tell people to police themselves" solution mentioned at top is not appropriate because of (a) a largely non-technical audience and (b) the unintentional nature of much of the usage as described above. The "run a sniffer and filter as needed" solution is not useful because these meetings typically only last a couple of days, often only one day, and have a very small volunteer staff. I don't have a person to dedicate to network monitoring, and by the time we got the rules tweaked completely the meeting will be over. What I've Got First thing, I figured I would use OpenDNS's domain filtering rules to filter out whole classes of sites. A number of video and peer-to-peer sites can be wiped out using this. (Yes, I am aware that filtering via DNS technically leaves the services accessible - remember, these are largely non-technical users attending a 2 day meeting. It's enough). I figured I would start with these selections in OpenDNS's UI: I figure I will probably also block DNS (port 53) to anything other than the router itself, so that folks can't bypass my DNS configuration. A savvy user could get around this, because I'm not going to put a lot of elaborate filters on the firewall, but I don't care too much. Because these meetings don't last very long, its probably not going to be worth the trouble. This should cover the bulk of the non-web traffic, i.e. peer-to-peer and video if that Wired article is correct. Please advise if you think there are severe limitations to the OpenDNS approach. What I Need Note that OpenDNS focuses on things that are "objectionable" in some context or another. Video, music, radio and peer-to-peer all get covered. I still need to cover a number of perfectly reasonable things that we just want to block because they aren't needed in a meeting. Most of these are utilities that upload or download legit things in the background. Specifically, I'd like to know port numbers or DNS names to filter in order to effectively disable the following services: Microsoft automatic updates Apple automatic updates Adobe automatic updates Google automatic updates Other major software update services Major virus/malware/security signature updates Major background backup services Other services that run in the background and can eat lots of bandwidth I also would like any other suggestions you might have that would be applicable. Sorry to be so verbose, but I find it helps to be very, very clear on questions of this nature, and I already have half a solution with the OpenDNS thing.

    Read the article

  • Which EC2 instance best for Chef server?

    - by hakunin
    I want to setup chef server as cheaply as possible, while leaving it enough room to run without crashing. The only article I found on the subject warned that RabbitMQ would crash on a micro instance due to insufficient memory. The question is: what's the cheapest EC2 instance that can run chef server reliably, considering that I don't use CouchDB or RabbitMQ for anything else in my app, so would probably have to set them up exclusively for chef server on that same instance.

    Read the article

  • Image backup with two Macs

    - by Konzepz
    Hi, My setup is as follows: iMac + Ext. HD in the living room A MacBook I want to create a regular weekly backup flow, that will create an image file for the MacBook (the entire disk image), and save it to the ext. HD on the iMac, meaning -- connect via local network and save the file. What's the best practice/application for this? Thank you.

    Read the article

  • Sharing Internet Connection

    - by user36852
    Hi :) I have a Cable Internet (Assigned IP etc) to connect to internet and I want to connect another computer to same line of cable as well. Both in Same room. Any suggestion, affordable solution please?

    Read the article

  • Apple: Airport extreme, 3 questions

    - by Patrick
    1) Can I use airport extreme + external hard disk as a server ? I mean, can I run operating systems such as ubuntu on it ? 2) Is it a bit noisy ? Can I place it in my sleeping room ? 3) Can airport extreme expand networks ? On the Apple website they say only Time Capsule can do it: www.apple.com/wifi/ thanks

    Read the article

  • Script or Batch File to Automate Logon from Welcome Screen

    - by Guy Thomas
    Is there a script or batch file to automate the log-on process from the XP Welcome screen? As all details are the same Username, Password, and Domain in a room of 30 machines. The reason I don't use Windows AutoAdminLogon is I only want to logon temporary at different times as a user to run such things as online test for a class of high school students without the students logging on individually first, also it would be useful for admin tasks if I can change/specify the user details.

    Read the article

  • Are there any good soft keyboards?

    - by oo
    My office is right next to my daughter's room and my typing sometimes wakes her up. Are there any soft keyboards that anyone recommends that would not make as much sound as a regular keyboard when typing?

    Read the article

  • Network use of Gaming PC

    - by Matthew Patrick Cashatt
    Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

    Read the article

  • Combining videos and recording sound over them

    - by Javier Badia
    This is the idea: I want to have a video where I appear twice. With pictures this is easy: you take two pictures of yourself without moving the camera, once in each corner of the room, and then combine half and half with MS Paint. What free Windows program can do this with videos? Also, I later want to record some more sound over it. Will that same program allow me to do that, or do I need something else?

    Read the article

  • What's the point of 6.0GB/s SATA harddrives?

    - by earlz
    So I've recently been seeing on the higher grade motherboards SATA 6.0gb/s ports. That's all fine and dandy. Extra room for expansion.. Now, my question is why are people already selling SATA 6.0GB/s port containing harddrives when it is already known that harddrives aren't even saturating 3.0GB/s(even server grade). What is the point of this?

    Read the article

  • Stop playback of my voice when using mic during a call with twinkle voip

    - by ageis23
    Hi When I'm making voip calls with twinkle I can hear myself via the speakers. It's not like an echo you might get in empty room for example. While this is useful if you're trying to check if your mic is working, it's annoying when you're trying to have a conversion. Constantly trying to filter out your own voice. I'm using twinkle as my client. Is it my client or is it a setting on my ATA/ mic configuration?

    Read the article

  • Can I do multi-computer and multi-monitor configuration with Synergy?

    - by BrianLy
    I've been asked to setup a demo room with multiple computers and monitors. We need to be able to use multiple monitors with a single PC in some cases. In other cases we need to switch between Mac and PC platforms. We would also like to be able to throw up slides or other information to screens which are not being used. Is it possible to do this with Synergy?

    Read the article

  • Small low resource music player?

    - by Tester101
    I'm looking for music player software that I can install on a 4GB thumb drive, it has to be small (so I have more room for music) and use as little system resources as possible. If it was compatible with Linux and Windows that would be great, but if not I would prefer it be compatible with Windows. I have been looking around, but I do not have time to try out every option available, so I thought this would be a good place to get some help. So what are some of the best options?

    Read the article

  • Designing a web application to scale

    - by Fahim Akhter
    Hi, While designing a web application facebook application to be precise. Which can spike and increase rapidly because of it vitality and is right intensive. What point should one keep in mind while designing the DB. For example what things should I leave room for if I need to shard or have a Master/Slave combination later (with memcache) Considering I use Relational Database with mySQL

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >