Search Results

Search found 1626 results on 66 pages for 'scott bailey'.

Page 21/66 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • Strange monitor issue - screen goes black after a few seconds

    - by Scott Szretter
    My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

    Read the article

  • The sound freezes while listening to music

    - by Scott
    I have bought an sound card - Sound Blaster X-FI Surround 5.1 PRO and while I'm listening to the music, after few minutes or even hours (it does happends randomly) the sound dissapears and I have to go settings: Playing Devices - Advanced and switch the Default Format (sampling frequency) and switch from the `16-bits, 48000 Hz (DVD Quality) to any other from the list (16-bits, 96000 Hz or 24-bits, 48000 Hz or 24-bits 96000 Hz). I have been trying to set all of the above options, but for all of them the sound freezes after listening to music. It is getting annoying and I hope its the settings fault and not my sound card. I got my drivers installed from the attached CD and I'm running Windows 7 HP 64 bits. If anyone would try to help me, I would really appreciate this.

    Read the article

  • rsync per-site configuration file?

    - by Scott
    I know how to configure a per-site entry for ssh, but is there any kind of a client configuration for rsync that allows per-site configuration options and aliases or similar shortcuts like the .ssh/config? I'm curious because I have a minimal ssh server installed on my android phone and I also have a minimal rsync tool on it as well. I'm getting tired of having to root login onto the phone and sym-link both tools to standard places the android OS looks for executables as the ssh server is bare bones and has a typical *bear multi-link binary for the basic unix commands (that does not include rsync) I end up having to include --rsync-path=/path/to/rsync/android/files/rsync every time I want to do any rsyncing of the files on my phone, but this path is always the same. I've gotten around it in the meantime with a glob approach in a shell script wrapper, but this sometimes limits the customization I can do with the rsync call. I'm just wondering if there is anything similar to the .ssh/config file where I can create an alias for my phone (e.g. 'android') where specifying rsync android:/mnt/sdcard will automatically assume --rsync-path=/blah/blah/blah --no-g --no-p --no-t etc. Tre`

    Read the article

  • What are your tricks for optimizing your Subversion configuration?

    - by Scott Markwell
    For a Linux or Windows system, what tricks do you do to optimize your Subversion server? The following are my current tricks for a Linux system serving over Apache with HTTPS and backed by Active Directory using LDAP authentication. Enabling KeepAlive on Apache Disable SVNPathAuthz Increase LDAP Cache Using the FSFS storage method instead of BDB Feel free to call this into question. I don't have hard proof that FSFS out performs BDB, only lots of tribal knowledge and hearsay.

    Read the article

  • Log viewer server and client

    - by Scott Crooks
    I'm looking for a log viewing solution for (mostly) Linux and (preferably) Windows too. I want to be able to centralize the log information for a lot of servers so that people in the company can see what's going on for different servers. I would guess this would involve having a central server which accepts information from the various computers / virtual machines with (perhaps) a running daemon on each of the servers. Does such a software exist?

    Read the article

  • Best way to allow fans/users to contribute to a facebook page now that discussions are gone? [migrated]

    - by Scott Beeson
    I run a facebook page with over 23,000 fans. I formerly had users submit recipes to the discussions tab. However, now that it is gone, I'm having difficulty finding a way to let users share recipes. If they simply post it in the stream, it goes away much to quickly. I've tried creating a new note with my personal account and tagging my page, but that does not make it show up in my pages "notes" section. Any ideas would be much appreciated.

    Read the article

  • Setting up a transparent proxy with only one box.

    - by Scott Chamberlain
    I am playing around with transparent proxies, unfortunately I do not have two machines to test it out with. The current way I am doing things is the program makes a request to a computer on port 80, I use iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy so I want to do something like iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong, I am learning after all and constructive criticism is definitely appreciated. The machine I am using is pretty low end so I would like not not have to create a VM with a second box unless absolutely necessary.

    Read the article

  • Allow connection to certain port from specified domain

    - by Scott
    I got two domains, which are pointing on the same IP address, I can use both to connect to the server or certain port (TeamSpeak), the problem is that I would like the only one domain from those two to be working while connecting to a certain port. Eg. example.com points at the 11.22.33.44 -- allow connection to the certain port from this domain. sample.com points at the 11.22.33.44 -- disallow connection to the port specified above from this domain. I know this would be possible for the IP addresses, but would it be possible for the domains?

    Read the article

  • Windows 7 64bit keyboard issues

    - by Scott
    I have a Pavilion dv4 notebook running Windows 7 64bit Enterprise edition. This morning I started to notice some really strange behavior in how it handled its built-in keyboard. At random intervals there will be a long delay in key presses, to which some keys will never show and other keys will continue to repeat until you hit the backspace. Other keys get mapped incorrectly to other keys. If I hook up an external keyboard the problem does not appear. Before I reformat the machine and do a fresh install, I thought I would check here to see if anyone has experienced this same issue and if so, how did you fix it?

    Read the article

  • Find rows that match multiple (two) criteria

    - by Scott Sanders
    I am trying to get a list of items that match on two criteria. DATE PRODUCT CHANNEL DEC 13 Cat Chow DRUG NOV 13 Pupperoni DRUG DEC 13 Meow Mix DRUG DEC 13 Jerky Treats DRUG This is the data from A1 to C5. I want all the product sold on DEC 13 and in the DRUG channel. This is the formula that I have now, which is only bringing back the first example. INDEX($B$2:$B$5, MATCH(1, ("DRUG"=$C$2:$C$5)*("DEC 13"=$A$2:$A$5), 0) )

    Read the article

  • How can I increase the size of the hard disk used by my Virtual Machine Manager (VMM) vm?

    - by Scott Langham
    In Virtual Machine Manager admin console, I used the 'New virtual machine' wizard and created a machine from an existing template. When I got to the Configure Hardware step, I selected the primary hard disk (which is a dynamic) disk and tried to increase it's maximum size, but this control is disabled so I can't increase it. It's not big enough for my purposes. how do I increase the maximum size of the hard-disk? Thanks. Edit: I am able to add a second hard disk of a size I specify. That's not useful though as I'm trying to install some software, some of which insists on being on drive C.

    Read the article

  • Searching Objects on SonicWALL (NSA 2600, SonicOS 6.1)

    - by Justin Scott
    Ok, this may sound like a dumb question, but does the SonicOS web interface not have a search option for object definitions? One of my clients recently decided to replace their Astaro Security Gateways with SonicWALL firewalls. These sit in front of a small data center full of servers and we have several hundred custom service and address definitions that need to be ported. The SonicOS interface provides a basic list for service and address definitions but no search option to be found. To make it worse, there is no option to list them all on one page (they're paginated 50 at a time) so I can't use the text search on the web browser either. The Astaro units have a nice search option on their definitions so perhaps I just got spoiled by their software. Am I missing something or is there some way to search for an object without paging through the list and finding an entry manually?

    Read the article

  • Setup Web Applications on Cisco ASA 9.1

    - by Scott
    I've been looking around the Cisco ASA administration screen with our network admin and haven't found the location where Web Applications can be setup. This seems like it should be a pretty straight forward procedure, especially if I just want to add a global application and not segment out by groups. I've looked through the docs, but they are a mess and answer most questions except for this. If you're going to post a RTFM answer, at least please provide link and location because I have looked. This is the location I'm looking to setup web applications on the clientless web VPN.

    Read the article

  • My Domain Is Getting Blocked As Gambling

    - by Tim Scott
    I have a site at http://slotted.co. Some of my would-be users complain that their company firewall blocking access. At least one user told me it was flagged as a gambling domain, which it is not. What can I do about this? Incidentally I own some other domains, such as signupster.com, which redirect to my site. I wonder if a quick workaround would be to make that my main domain and have slotted.co redirect? Obviously I prefer in the long terms that slotted.co is considered clean.

    Read the article

  • set a global environment variable in linux that sticks when going root

    - by Scott
    When I SSH into a linux box, I want to have the /etc/profile file save the results of the whoami command to a global environment variable. if I were to go root with the command sudo su -, I do not want that command to run again when gonig root, I want it to stick with the result of whoami as my regular username from before I went root, and I need to access that variable as the root user even though it will run the /etc/profile file again when I go root. What can I do to only run that command once in the /etc/profile command?

    Read the article

  • Find RARs with duplicate content

    - by Scott McClenning
    I need a utility to find RAR files that contain duplicate data (i.e. files within the RAR that hash the same, but could have different names). I can open the RARs and see the CRCs are the same, but I was hoping for a more automated process that would work in bulk (hundreds of files). Hashing the overall RAR won't help because the file contained within could have different names, or the archive could be compressed at different levels. If needed, a utility that would extract the contents of the RARs and then compare would work, but is not preferred. I would prefer a free utility for Windows, but a pay utility or a utility for Linux would be acceptable.

    Read the article

  • What does the red x icon mean next to a user in folder permissions (Windows 7)

    - by Scott Szretter
    In trying to debug various strange issues on a machine, I found something strange - when I go to C:\Users\administrator and get properties, security tab, it lists the users (the local admin account, system, and 'administrator' which is the domain administrator account). It all looks fine in terms of permissions (full control, etc.) compared to other machines. The one difference is there is a small red circle with an X to the left of the user icon/name. Additionally, there are various folders where it says access denied under there - for example, my documents! Even logged in as the local machine administrator account (which is not named administrator), I am unable to change the permissions - it says access denied. Any ideas what this means and how to fix it? I even tried re-joining the machine to the domain.

    Read the article

  • I Cannot connect to remote MySQL database using SSH tunnel

    - by Scott
    Brand new server, brand new MySQL 5.5 install on Ubuntu 12.04. I can log in to the database as root from the command line. I can log on via Navicat MySQL or Sequel Pro as root on port 3306 from my Mac. I cannot log in using an SSH tunnel to the server and then to the database as root. I have tried both localhost and 127.0.0.1 as server for the local connection part. My password is fine. root is currently defined at %, 127.0.0.1, and localhost. I have set up this same type of connection at least 30 times before and never had a problem. The SSH connection gets made with no problem, and then it just hangs trying to connect to the DB and finally times out. The only thing I changed in my.cnf was to comment out the bind-address = 127.0.0.1 line. Any help? Any Ideas?

    Read the article

  • Microsoft’s Contribution to jQuery – Client Templating

    - by joelvarty
    I am interested to see the community’s response to Microsoft’s contributions to jQuery.  I have been using jTemplates on and off in my apps for a while, but I will certainly check out the new templating plugins put forth by MS and explained here by Scott Guthrie. It may be that some are against the very idea of a company like Microsoft being involved with jQuery, and Scott explains the process with the following: “jQuery has a fantastic developer community, and a very open way to propose suggestions and make contributions.  Microsoft is following the same process to contribute to jQuery as any other member of the community.” I think we can take this in one of two ways:  It’s great that Microsoft sees themselves as a part of a greater community that they can support. It’s the first step in Microsoft’s attempt to usurp the community and have greater control over the web, it’s standards, and it’s developer community. Personally, I believe Microsoft sees the world (and the web) differently from how they did back when IE had more than %80 of the browser market.  Now, in order to keep it’s development products relevant, they are pushing Asp.Net (as they have been for a few years) towards a more open strategy that’s more “web-like” in my opinion. These contributions to jQuery are a good thing, I think.  Now, let’s go try out these new plug-ins and see if they stack up… more later - joel

    Read the article

  • Productivity Tips

    - by Brian T. Jackett
    A few months ago during my first end of year review at Microsoft I was doing an assessment of my year.  One of my personal goals to come out of this reflection was to improve my personal productivity.  While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach.  There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time.    Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity.  The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic.   Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video)    I highly recommend Scott Hanselman’s video above and this post before continuing with this article.  It is well worth the 40+ mins price of admission for the video and couple minutes for article.  One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me.  We all have a finite amount of time to work each day.  Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)?  Do your actions and commitments reflect your priorities?    The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV.  I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly.  As for TV I’ve cut the cord and no longer subscribe to cable TV.  Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption.  With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously).  I’ll mention a few tools for helping measure your time in the Tools section.   Processes    Do not multi-task.  I’ll say it again.  Do not multi-task.  There is no such thing as multi tasking.  The human brain is optimized to work on one thing at a time.  When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin.  I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly.    Now there are some ways of bending the rules of physics for this one.  There is the notion of getting a double amount of work done in the same timeframe.  Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom.    Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts).  I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner.  I’m terrible with auditory learning.  My fiance and I joke that sometimes we talk and talk to each other but never really hear each other.   Goals / Tasks    Goals can give us direction in life and a sense of accomplishment when we complete them.  Goals can also overwhelm us and give us a sense of failure when we don’t complete them.  I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing.    At the end of each time frame have a retrospective to review your progress.  Do not feel guilty about what you did not accomplish.  Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals.  Here is a sample schedule I’ve seen proposed by some.  I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals   Tools    Tools are an extension of our human body.  They help us extend beyond what we can physically and mentally do.  Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products.  I just happen to like them and find them useful. Instapaper – Save internet links for reading later.  There are many tools like this but I’ve found this to be a great one.  There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go.  It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost.  Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and  Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices.  Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds.  I used to have hundreds of unread items all the time.  Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT.  There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”?  This service tracks your computer actions and then lets you report on them.  This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool.  It is now built into every client and server OS.  This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone.  If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used.  Almost all of it still applies today.   Personal Health    Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis.  Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days.  Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities.  I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet.  Too much sugar, caffeine, junk food, etc. are not good for your body.  This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential.   Email    Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage.  Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email.  Email from external customers, my manager, or include me directly on the To line go into my inbox.  Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available).  I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands.  Learn them and you’ll see your speed getting through emails increase. Keep emails short.  No one Few people like reading through long emails.  The first line should state exactly why you are sending the email followed by a 3-4 lines to support it.  Anything longer might be better suited as a phone call or in person discussion.   Conclusion    In this post I walked through various tips and tricks I’ve found for improving personal productivity.  It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities.  I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need.  I see a big future in touch enabled devices.  Hopefully some of these tips help you out.  If you have any tools, tips, or ideas you would like to share feel free to add in the comments section.         -Frog Out   Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271   Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice   Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx   Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/   Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html   Instapaper http://www.instapaper.com/u   Stacks for Instapaper http://www.stacksforinstapaper.com/   Slapdash Podcast Windows Phone -  http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW   Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW   Rescue Time http://www.rescuetime.com/   PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

    Read the article

  • Free Video Training: ASP.NET MVC 3 Features

    - by ScottGu
    A few weeks ago I blogged about a great ASP.NET MVC 3 video training course from Pluralsight that was made available for free for 48 hours for people to watch.  The feedback from the people that had a chance to watch it was really fantastic.  We also received feedback from people who really wanted to watch it – but unfortunately weren’t able to within the 48 hour window. The good news is that we’ve worked with Pluralsight to make the course available for free again until March 18th.  You can watch any of the course modules for free, through March 18th, on the www.asp.net/mvc website here: The 6 videos in this course are a total of 3 hours and 17 minutes long, and provide a nice overview of the new features introduced with ASP.NET MVC 3 including: Razor, Unobtrusive JavaScript, Richer Validation, ViewBag, Output Caching, Global Action Filters, NuGet, Dependency Injection, and much more.  Scott Allen is the presenter, and the format, video player, and cadence of the course is really excellent. It provides a great way to quickly come up to speed with all of the new features introduced with the new ASP.NET MVC 3 release. Introductory ASP.NET MVC 3 course also coming soon The above course provides a good way for people already familiar with ASP.NET MVC to quickly learn the new features in the V3 release. Pluralsight is also working on a new introductory ASP.NET MVC 3 course series designed for developers who are brand new to ASP.NET MVC, and who want an end to end training curriculum on how to come up to speed with it.  It will cover all of the basics of ASP.NET MVC (including the new Razor view engine), how to use EF code first for data access, using JavaScript/AJAX with MVC, security scenarios with MVC, unit testing applications, deploying applications, and more. I’m excited to pre-announce that we’ll also make this new introductory series free on the www.asp.net/mvc web-site for anyone to watch. I’ll do another blog post linking to it once it is live and available. Hope this helps, Scott

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >