Search Results

Search found 1866 results on 75 pages for 'steve kiss'.

Page 21/75 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• How to copy lots of files between two computers, without network?

  - by Steve Bennett

  I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Cannot change port 25 to port 587

  - by Steve

  I am using outlook 2003. My email provider is Cox. Trying to change my out going port to 587 so I send mail while traveling. Others I know on Cox have done this with succes, but they are using newer version of outlook. When I go to change my existing email accounts, outlook will not allow me to change the settings. I can delete 25, but it will not allow me to type in 587. What am I doing wrong?

  Read the article

• SBS 2003 to SBS 2011

  - by Steve

  We've migrated SBS 2003 to SBS 2011...so far everything has gone smoothly. We're in the final phase of migrating the last amount of data over. Is there a way I can check to be sure that our old server isn't restarting due to the 21 day grace period? As our 21 days is up on Thursday. Yet it's restarting on its own now...maybe a power supply issue...? Is there any way to extend the 21 days? or roll it back? or does this take a call to MSFT? Very odd...

  Read the article

• LINKED TABLES BETWEEN MS ACCESS 2003 AND MS ACCESS 2007-WRITE PERMISSIONS DENIED

  - by STEVE KING

  We are in the process of switching over to ACCESS 2007. We have numerous data tables in ACCESS 2003 files. In one case, the user has 2007 on his PC and opend the front end in 2007. No problems. When the the user is done, he clicks a button that executes a macro full of update queries. The macro reaches the first query and halts. We get a messge saying we do not have permisons to write to this linked table (2003 format). There were no security files involved. We re-linked from 2007, same problem. LAN permssions were ok. I wound up having to import the tables to front end in order for the user to be able to do his job.

  Read the article

• Windows 7 sticky notes – Changing default font

  - by Steve Crane

  Has anyone figured out how to change the default font for the Windows 7 Sticky Notes app? I can't stand that faux handwriting font it uses.

  Read the article

• Mac OS X, MySQL Preference Pane doesn't work

  - by Steve Kuo

  I downloaded and installed MySQL 5.1.47 for OS X 10.6 using the DMG archive: mysql-5.1.47-osx10.6-x86_64.dmg I also installed MySQL.prefPane and MySQLStartupItem.pkg. MySQL.prefPane is a Preference Pane. The problem is, whenever I attempt to start/stop MySQL from the Preference Pane, System Preferences just hangs. It runs at about 50% CPU forever, eventually I have for force quit System Preferences. The same thing happens if I toggle "Automatically Start MySQL Server on Startup". Basically the MySQL Preference Pane is not functional. Note that I have no problem starting MySQL from the command line: sudo /usr/local/mysql/bin/mysqld_safe I have tried reinstalling MySQL and the Preference Pane. I'm using the standard installation location, nothing out of the ordinary. Every time the MySQL Preference Pane just hangs. I'm doing this on a Macbook Pro (Intel) running OS X 10.6.3. There are no old versions of MySQL on this machine.

  Read the article

• Google Chrome mouse wheel takes keyboard focus

  - by Steve Crane

  I recently switched the default browser on all my machines from Firefox to Google Chrome. In general I’m loving Chrome but there is one behaviour that is driving me nuts. Scrolling with the mouse wheel takes keyboard focus away from the document. Here’s what happens. I’ve just opened a page or switched to a new tab and the page has keyboard focus as I can use the keyboard up/down and PgUp/PgDn keys to scroll it; no problem there. But if I then use the wheel on my mouse to scroll the page, it loses the keyboard focus and no longer responds to up/down, PgUp/PgDn, or in fact any other keyboard keys. I have to click on the page background to restore the keyboard focus. This is a minor inconvenience for scrolling but where it really drives me nuts is in Google Reader and Gmail where I use keyboard shortcuts a lot. Here I find that I scroll the article or e-mail I’m reading with the mouse wheel then get no response when I press j/k to move to the next or previous article or e-mail. I am using Windows 7 and the Chrome dev channel (version 4.0.249.43).

  Read the article

• What usb-bootable utility should I use to copy SATA hard drives?

  - by Steve Brown

  I have a computer that only has two SATA connections and I need to copy one SATA hard drive to another. Since I have to unplug the CD drive to copy the drives I need a USB-bootable utility. I have an old school copy of Norton Ghost (CD based): Ghost has always worked well for me in the past - I see there is a new "version 15" out but I'm not sure if it is worth buying. A friend has Acronis True Image on a USB drive: We tried to use that on the computer but it was unable to copy both partitions (restore partition and main partition). Of course there may be some problem with the drive that is keeping Acronis from working (it is just exiting with a lame error about not being able to copy the disks and no error code or detailed information), but I'm interested in knowing if there is a better, more solid, or widely used solution that I should invest in. What usb-bootable utilities can I use to copy SATA hard drives?

  Read the article

• Linux SW Raid: whole disk or per-partition?

  - by Steve Pomeroy

  I have inherited a machine which has 2 physical disks and uses Linux SW RAID(1). Both disks are partitioned and are are all individual arrays (/dev/md0, /dev/md6, etc.). Those arrays are then mounted (/boot, /home, etc. even /tmp). As RAID is designed to mitigate physical failures, is there any reason why one would use this technique over whole-disk arrays that are then partitioned (perhaps using LVM)? This seems prone to more potential issues, but may have some special properties that I haven't been able to glean. I'm planning on moving this setup to: disks?SWRAID(1)?LVM as I'll be making multiple VMs out of the one machine, but wanted to make sure I knew what I was doing when I got rid of the old setup.

  Read the article

• Totally Frustrated with Gimp - can't do a simple cut, paste and move

  - by Steve

  Looking to do a simple cut image portion and move it to cover over another portion. The image has a transparent background. When I copy and paste to a new layer and view only the new layer, nothing's there. I tried copy visible, paste into, no good. How do you do a simple copy, paste and move?

  Read the article

• Logging Virus Definition Updates for MS Security Essentials in The Security Event Log

  - by Steve

  I would like to log a security in event in Windows 7 whenever the Microsoft Security Essentials 2 virus definition files are updates, deleted, or changed. I was expecting to do this with an Audit setting on one of the MS Security Essentials folders but I wasn't sure which one and how to avoid getting swamped with messages. What folder or files should I audit to track definition updates (or corruption) in the security events or is there a better approach?

  Read the article

• Firefox and Chrome keeps forcing HTTPS on Rails app using nginx/Passenger

  - by Steve

  I've got a really weird problem here where every time I try to browse my Rails app in non-SSL mode Chrome (v16) and Firefox (v7) keeps forcing my website to be served in HTTPS. My Rails application is deployed on a Ubuntu VPS using Capistrano, nginx, Passenger and a wildcard SSL certificate. I have set these parameters for port 80 in the nginx.conf: passenger_set_cgi_param HTTP_X_FORWARDED_PROTO http; passenger_set_cgi_param HTTPS off; The long version of my nginx.conf can be found here: https://gist.github.com/2eab42666c609b015bff The ssl-redirect.include file contains: rewrite ^/sign_up https://$host$request_uri? permanent ; rewrite ^/login https://$host$request_uri? permanent ; rewrite ^/settings/password https://$host$request_uri? permanent ; It is to make sure those three pages use HTTPS when coming from non-SSL request. My production.rb file contains this line: # Enable HTTP and HTTPS in parallel config.middleware.insert_before Rack::Lock, Rack::SSL, :exclude => proc { |env| env['HTTPS'] != 'on' } I have tried redirecting to HTTP via nginx rewrites, Ruby on Rails redirects and also used Rails view url using HTTP protocol. My application.rb file contains this methods used in a before_filter hook: def force_http if Rails.env.production? if request.ssl? redirect_to :protocol => 'http', :status => :moved_permanently end end end Every time I try to redirect to HTTP non-SSL the browser attempts to redirect it back to HTTPS causing an infinite redirect loop. Safari, however, works just fine. Even when I've disabled serving SSL in nginx the browsers still try to connect to the site using HTTPS. I should also mention that when I pushed my app on to Heroku, the Rails redirect work just fine for all browsers. The reason why I want to use non-SSL is that my homepage contains non-secure dynamic embedded objects and a non-secure CDN and I want to prevent security warnings. I don't know what is causing the browser to keep forcing HTTPS requests.

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• How can I make ls and xargs combined omit path

  - by Steve McLeod

  I have a folder called lib. In that folder are some files. I want to obtain all the names of the files that end in .jar, and concatenate them into a line, separated by spaces. I don't want the path name at all. I've tried this: ls lib/*.jar | xargs and the output is lib/file1.jar lib/file2.jar But what I'm trying to get is file1.jar file2.jar How can I do this? I've also tried find but I get the same problem find lib -name *.jar | xargs

  Read the article

• Using uk domain names on us hosting

  - by Steve Cooper

  Hi, all. I'm thinking of transferring my UK websites to a US hosting company, and they assure me they can host UK domains. However, as a bit of a n00b I don't understand the relationship between UK domain registration and US hosting. If anyone can explain this relationship I'd be very grateful. What pitfalls and problems should I be alert to? Many thanks.

  Read the article

• Do I need to be worried about these SMART drive temperatures?

  - by Steve Lorimer

  I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

  Read the article

• XML Schema For MBSA Reports

  - by Steve Hawkins

  I'm in the process of creating a script to run the command line version of Microsoft Baseline Security Analyzer (mbsacli.exe) against all of our servers. Since the MBSA reports are provided as XML documents, I should be able to write a script or small program to parse the XML looking for errors / issues. I'm wondering if anyone knows whether or not the XML schema for the MBSA reports is documented anywhere -- I have goggled this, and cant seem to find any trace of it. I've run across a few articles that address bits and pieces, but nothing that addresses the complete schema. Yes, I could just reverse engineer the XML, but I would like to understand a little more about the meaning of some of the tags. Thanks...

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• Squid Authentication & streaming

  - by Steve Butler

  I've got squid setup using Kerberos authentication. I'm also using squidguard as an URL redirector to block out the usual nastiness of the web. There are some sites though that we allow certain users to, and others not. This all works well, assuming I'm not using any streaming. From what i can determine from the squid logs and the wireshark traces I've done, when the initial request to stream is sent, everything is good, the authenticated username is sent with the request to squidguard. The problem is that on subsequent traffic the username is not sent to squidguard, causing it to be blocked based on default policy. I've tried using the squid built-in allow/deny stuff, but its relatively clunky, and so far squidguard has been pretty easy and fast. Here comes the question(s): How do i get Squid to pass username on all requests? (something tells me this isn't the best way) How do i get squidguard to see traffic is authenticated to a specific user even when a username isn't passed? Is there any other way of accomplishing this? A few details that may be of importance: I'm using a list of users stored in a text file for squidguard to compare against. I'm using full kerberos auth with Squid. CentOS 6.0 Squid 3.1.4 Squidguard 1.3

  Read the article

• CentOS Failover Cluster - SIOCADDRT: No such process (when adding a loopback)

  - by Steve Rolfe

  I'm trying to configure two web servers for a load balancing server. The load balancing aspect works fine (it sees both server, kills 'em if it needs to, and seems to direct traffic fine). The only issue is with the servers looping: /etc/sysconfig/network-scripts/ifcfg-lo:0 DEVICE=lo:0 IPADDR=<Virtual IP> NETMASK=255.255.255.255 ONBOOT=yes NAME=loopback Everytime I try a "service network restart" I get a SIOCADDRT: No such process when loading the loopback interface. Anyone have an idea what's causing this?

  Read the article

• IE8 Windows 7 (64bit) security certificate problem

  - by Steve

  Hi, We have just received some new computers for use in the office (Dell Vostro). They seem to work fine in the main. When we use IE8 to go to some web pages such as yahoo mail it tells us: “There is a problem with this websites security certificate” If we have a look at the details it says: “This certificate cannot be verified up to a trusted certification authority” This however works correctly in Firefox. I don't understand why I should get such an error message, should this not just work? I don't think its anything to do with the certificate itself as this is happening on www.yahoo.co.uk and other commercial (amazon I think?) sites. I think there is something off with the PCs setup. The PC has Windows 7 (64 bit) and Norton Internet Security installed. Any ideas as to why this is happening? Thanks

  Read the article

• Windows 7 - Non Admin run as Admin for Explorer - still can't see all tmp internet files

  - by Steve

  I'm trying to retrieve video files from the IE 8 cache for a user that's not an admin in Win 7. As a non admin user, I run Explorer as admin and still can't see the temp internet files for the non admin user. Only if I login as a user that is admin can I see the files. Is there any way I can see the files w/o having to go through the login process? Essentially, I want the video file from this page and others like it: http://video.yahoo.com/watch/111585/1027823

  Read the article

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• Printer keeps going offline in Windows 7 XP Mode

  - by Steve Rowe

  Every time I reboot the computer, the printer in Windows 7 XP mode goes offline. I have to go back into the full XP mode and attach the printer again to make it work. I have the settings set to automatically attach the printer, but it doesn't appear to be working. Any ideas what might make it automatically re-attach? Does anyone see this working?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >