Search Results

Search found 533 results on 22 pages for 'variant'.

Page 21/22 | < Previous Page | 17 18 19 20 21 22  | Next Page >

• Boost::Spirit::Qi autorules -- avoiding repeated copying of AST data structures

  - by phooji

  I've been using Qi and Karma to do some processing on several small languages. Most of the grammars are pretty small (20-40 rules). I've been able to use autorules almost exclusively, so my parse trees consist entirely of variants, structs, and std::vectors. This setup works great for the common case: 1) parse something (Qi), 2) make minor manipulations to the parse tree (visitor), and 3) output something (Karma). However, I'm concerned about what will happen if I want to make complex structural changes to a syntax tree, like moving big subtrees around. Consider the following toy example: A grammar for s-expr-style logical expressions that uses autorules... // Inside grammar class; rule names match struct names... pexpr %= pand | por | var | bconst; pand %= lit("(and ") >> (pexpr % lit(" ")) >> ")"; por %= lit("(or ") >> (pexpr % lit(" ")) >> ")"; pnot %= lit("(not ") >> pexpr >> ")"; ... which leads to parse tree representation that looks like this... struct var { std::string name; }; struct bconst { bool val; }; struct pand; struct por; struct pnot; typedef boost::variant<bconst, var, boost::recursive_wrapper<pand>, boost::recursive_wrapper<por>, boost::recursive_wrapper<pnot> > pexpr; struct pand { std::vector<pexpr> operands; }; struct por { std::vector<pexpr> operands; }; struct pnot { pexpr victim; }; // Many Fusion Macros here Suppose I have a parse tree that looks something like this: pand / ... \ por por / \ / \ var var var var (The ellipsis means 'many more children of similar shape for pand.') Now, suppose that I want negate each of the por nodes, so that the end result is: pand / ... \ pnot pnot | | por por / \ / \ var var var var The direct approach would be, for each por subtree: - create pnot node (copies por in construction); - re-assign the appropriate vector slot in the pand node (copies pnot node and its por subtree). Alternatively, I could construct a separate vector, and then replace (swap) the pand vector wholesale, eliminating a second round of copying. All of this seems cumbersome compared to a pointer-based tree representation, which would allow for the pnot nodes to be inserted without any copying of existing nodes. My question: Is there a way to avoid copy-heavy tree manipulations with autorule-compliant data structures? Should I bite the bullet and just use non-autorules to build a pointer-based AST (e.g., http://boost-spirit.com/home/2010/03/11/s-expressions-and-variants/)?

  Read the article

• Languages and VMs: Features that are hard to optimize and why

  - by mrjoltcola

  I'm doing a survey of features in preparation for a research project. Name a mainstream language or language feature that is hard to optimize, and why the feature is or isn't worth the price paid, or instead, just debunk my theories below with anecdotal evidence. Before anyone flags this as subjective, I am asking for specific examples of languages or features, and ideas for optimization of these features, or important features that I haven't considered. Also, any references to implementations that prove my theories right or wrong. Top on my list of hard to optimize features and my theories (some of my theories are untested and are based on thought experiments): 1) Runtime method overloading (aka multi-method dispatch or signature based dispatch). Is it hard to optimize when combined with features that allow runtime recompilation or method addition. Or is it just hard, anyway? Call site caching is a common optimization for many runtime systems, but multi-methods add additional complexity as well as making it less practical to inline methods. 2) Type morphing / variants (aka value based typing as opposed to variable based) Traditional optimizations simply cannot be applied when you don't know if the type of someting can change in a basic block. Combined with multi-methods, inlining must be done carefully if at all, and probably only for a given threshold of size of the callee. ie. it is easy to consider inlining simple property fetches (getters / setters) but inlining complex methods may result in code bloat. The other issue is I cannot just assign a variant to a register and JIT it to the native instructions because I have to carry around the type info, or every variable needs 2 registers instead of 1. On IA-32 this is inconvenient, even if improved with x64's extra registers. This is probably my favorite feature of dynamic languages, as it simplifies so many things from the programmer's perspective. 3) First class continuations - There are multiple ways to implement them, and I have done so in both of the most common approaches, one being stack copying and the other as implementing the runtime to use continuation passing style, cactus stacks, copy-on-write stack frames, and garbage collection. First class continuations have resource management issues, ie. we must save everything, in case the continuation is resumed, and I'm not aware if any languages support leaving a continuation with "intent" (ie. "I am not coming back here, so you may discard this copy of the world"). Having programmed in the threading model and the contination model, I know both can accomplish the same thing, but continuations' elegance imposes considerable complexity on the runtime and also may affect cache efficienty (locality of stack changes more with use of continuations and co-routines). The other issue is they just don't map to hardware. Optimizing continuations is optimizing for the less-common case, and as we know, the common case should be fast, and the less-common cases should be correct. 4) Pointer arithmetic and ability to mask pointers (storing in integers, etc.) Had to throw this in, but I could actually live without this quite easily. My feelings are that many of the high-level features, particularly in dynamic languages just don't map to hardware. Microprocessor implementations have billions of dollars of research behind the optimizations on the chip, yet the choice of language feature(s) may marginalize many of these features (features like caching, aliasing top of stack to register, instruction parallelism, return address buffers, loop buffers and branch prediction). Macro-applications of micro-features don't necessarily pan out like some developers like to think, and implementing many languages in a VM ends up mapping native ops into function calls (ie. the more dynamic a language is the more we must lookup/cache at runtime, nothing can be assumed, so our instruction mix is made up of a higher percentage of non-local branching than traditional, statically compiled code) and the only thing we can really JIT well is expression evaluation of non-dynamic types and operations on constant or immediate types. It is my gut feeling that bytecode virtual machines and JIT cores are perhaps not always justified for certain languages because of this. I welcome your answers.

  Read the article

• Replace conditional with polymorphism refactoring or similar?

  - by Anders Svensson

  Hi, I have tried to ask a variant of this question before. I got some helpful answers, but still nothing that felt quite right to me. It seems to me this shouldn't really be that hard a nut to crack, but I'm not able to find an elegant simple solution. (Here's my previous post, but please try to look at the problem stated here as procedural code first so as not to be influenced by the earlier explanation which seemed to lead to very complicated solutions: http://stackoverflow.com/questions/2772858/design-pattern-for-cost-calculator-app ) Basically, the problem is to create a calculator for hours needed for projects that can contain a number of services. In this case "writing" and "analysis". The hours are calculated differently for the different services: writing is calculated by multiplying a "per product" hour rate with the number of products, and the more products are included in the project, the lower the hour rate is, but the total number of hours is accumulated progressively (i.e. for a medium-sized project you take both the small range pricing and then add the medium range pricing up to the number of actual products). Whereas for analysis it's much simpler, it is just a bulk rate for each size range. How would you be able to refactor this into an elegant and preferably simple object-oriented version (please note that I would never write it like this in a purely procedural manner, this is just to show the problem in another way succinctly). I have been thinking in terms of factory, strategy and decorator patterns, but can't get any to work well. (I read Head First Design Patterns a while back, and both the decorator and factory patterns described have some similarities to this problem, but I have trouble seeing them as good solutions as stated there. The decorator example seems very complicated for just adding condiments, but maybe it could work better here, I don't know. And the factory pattern example with the pizza factory...well it just seems to create such a ridiculous explosion of classes, at least in their example. I have found good use for factory patterns before, but I can't see how I could use it here without getting a really complicated set of classes) The main goal would be to only have to change in one place (loose coupling etc) if I were to add a new parameter (say another size, like XSMALL, and/or another service, like "Administration"). Here's the procedural code example: public class Conditional { private int _numberOfManuals; private string _serviceType; private const int SMALL = 2; private const int MEDIUM = 8; public int GetHours() { if (_numberOfManuals <= SMALL) { if (_serviceType == "writing") return 30 * _numberOfManuals; if (_serviceType == "analysis") return 10; } else if (_numberOfManuals <= MEDIUM) { if (_serviceType == "writing") return (SMALL * 30) + (20 * _numberOfManuals - SMALL); if (_serviceType == "analysis") return 20; } else //i.e. LARGE { if (_serviceType == "writing") return (SMALL * 30) + (20 * (MEDIUM - SMALL)) + (10 * _numberOfManuals - MEDIUM); if (_serviceType == "analysis") return 30; } return 0; //Just a default fallback for this contrived example } } All replies are appreciated! I hope someone has a really elegant solution to this problem that I actually thought from the beginning would be really simple... Regards, Anders

  Read the article

• VBA WinHTTPRequest and submitting forms

  - by Hazerider

  Hi. I spent all day yesterday trying to figure out how to submit a form using WinHTTPRequest. I can do it pretty easily with an InternetExplorer object, but the problem is that I need to save a PDF file that gets returned, and I am not sure how to do this with the IE object. Here is the relevant HTML code snippet: <div class="loginHome-left"> <fieldset> <h3>Log in Using</h3> <form> <label for="standardLogin" accesskey="s"> <input name="useLogin" id="standardLogin" value="standard" type="radio" checked="true">Standard Login</label> &nbsp; <label for="rsaSecurID" accesskey="r"> <input name="useLogin" value="rsaSecur" type="radio" id="rsaSecurID" onclick="redirectLogin('ct_logon_securid');return false;">RSA SecurID</label> &nbsp; <label for="employeeNTXP" accesskey="e"> <input name="useLogin" id="employeeNTXP" value="employee" type="radio" onclick="redirectLogin('ct_logon_external_nt');return false; "> Employee Windows Login<br></label> </form> <br> <div class="error">Error: ...</div><br> <form onSubmit="if(validate(this)) {formSubmit();} return false;" name="passwdForm" method="post" action="/UAB/ct_logon"> <input value="custom" name="pageId" type="hidden"> <input value="custom" name="auth_mode" type="hidden"> <input value="/UAB/ct_logon" name="ct_orig_uri" type="hidden"> <INPUT VALUE="" NAME="orig_url" TYPE="hidden"> <input value="" name="lpSp" type="hidden"> <label for="user"> <strong>Username</strong> </label> <input autocomplete="off" name="user" type="text" value="" class="txtFld" onkeypress="return handleEnter(this, event);"> <br> <label for="EnterPassword"> <strong>Password</strong>&nbsp;&nbsp;(<a tabindex="-1" href="/UAB/BCResetWithSecrets">Forgot Your Password?</a>) </label> <input autocomplete="off" name="password" type="password" class="txtFld" onkeypress="return handleEnter(this, event);"> <INPUT id="rememberLogin" name="lpCookie" type="checkbox"> <label for="rememberLogin">Remember My Login Information</label><br> </form> <div class="right"> <br> <input type="image" src="/BC_S/images/bclogin/btn_login.gif" name="" value="Submit" onClick="if(validate(document.forms['passwdForm'])){formSubmit();}return false;"> </div> <div class="clearfix"></div> </fieldset> </div> In order to log in through InternetExplorer, I do the following: Sub TestLogin() Dim ie As InternetExplorer, doc As HTMLDocument, form As HTMLFormElement, inp As Variant Set ie = New InternetExplorer ie.Visible = True ie.navigate "https://URL of the login page" Do Until ie.readyState = READYSTATE_COMPLETE Loop Set doc = ie.document For Each form In doc.forms If InStr(form.innerText, "Password") <> 0 Then form.elements("user").Value = "my_name" form.elements("password").Value = "my_password" Exit For Else End If Next 'This is the unnamed input with an image that is used to submit the form' doc.all(78).Click ie.navigate "https://url of the PDF" Do Until ie.readyState = READYSTATE_COMPLETE Loop Dim filename As String, filenum As Integer filename = "somefile.pdf" filenum = FreeFile Open filename For Binary Access Write As #filenum Write #filenum, doc.DocumentElement.innerText Close #filenum ie.Quit Debug.Print Set ie = Nothing End Sub What I really would like to do is something along the lines of the following: Sub TestLogin3() Dim whr As New WinHttpRequest, postData As String whr.Open "POST", "https://live.barcap.com/UAB/ct_logon", False whr.setRequestHeader "User-Agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)" whr.setRequestHeader "Connection", "Keep-Alive" whr.Send whr.WaitForResponse postData = "user=paschom1&password=change01" 'Or the following?' postData = "user=paschom1&password=change01&orig_url=&pageId=custom&auth_mode=custom&ct_orig_uri=/BC/dispatcher&lpSp=&lpCookie=off" whr.Send postData whr.WaitForResponse Debug.Print whr.responseText End Sub It just refuses to work though. Not sure if I need to use more setRequestHeader with Content-Form or something similar, and if I do, not sure what exactly I am supposed to pass it. If anyone has any advice regarding this, it would be hugely appreciated. I could probably use a perl module to do it, but I would rather keep it all in VBA if possible. Thanks, Marc.

  Read the article

• Using an alternate search platform in Commerce Server 2009

  - by Lewis Benge

  Although Microsoft Commerce Server 2009's architecture is built upon Microsoft SQL Server, and has the full power of the SQL Full Text Indexing Search Platform, there are time however when you may require a richer or alternate search platform. One of these scenarios if when you want to implement a faceted (refinement) search into your site, which provides dynamic refinements based on the search results dataset. Faceted search is becoming popular in most online retail environments as a way of providing an enhanced user experience when browsing a larger catalogue. This is powerful for two reasons, firstly with a traditional search it is down to a user to think of a search term suitable for the product they are trying to find. This typically will not return similar products or help in any way to refine a larger dataset. Faceted searches on the other hand provide a comprehensive list of product properties, grouped together by similarity to help the user narrow down the results returned, as the user progressively restricts the search criteria by selecting additional criteria to search again, these facets needs to continually refresh. The whole experience allows users to explore alternate brands, price-ranges, or find products they hadn't initially thought of or where looking for in a bid to enhance cross sell in the retail environment. The second advantage of this type of search from a business perspective is also to harvest the search result to start to profile your user. Even though anonymous users may routinely visit your site, and will not necessarily register or complete a transaction to build up marketing data- profiling, you can still achieve the same result by recording search facets used within the search sequence. Below is a faceted search scenario generated from eBay using the search term "server". By creating a search profile of clicking through Computer & Networking -> Servers -> Dell - > New and recording this information against my user profile you can start to predict with a lot more certainty what types of products I am interested in. This will allow you to apply shopping-cart analysis against your search data and provide great cross-sale or advertising opportunity, or personalise the user experience based on your prediction of what the user may be interested in. This type of search is extremely beneficial in e-Commerce environments but achieving it out of the box with Commerce Server and SQL Full Text indexing can be challenging. In many deployments it is often easier to use an alternate search platform such as Microsoft's FAST, Apache SOLR, or Endecca, however you still want these products to integrate natively into Commerce Server to ensure that up-to-date inventory information is presented, profile information is generated, and you provide a consistant API. To do so we make the most of the Commerce Server extensibilty points called operation sequence components. In this example I will be talking about Apache Solr hosted on Apache Tomcat, in this specific example I have used the SolrNet C# library to interface to the Java platform. Also I am not going to talk about Solr configuration of indexing – but in a production envionrment this would typically happen by using Powershell to call the Commerce Server management webservice to export your catalog as XML, apply an XSLT transform to the file to make it conform to SOLR and use a simple HTTP Post to send it to the search enginge for indexing. Essentially a sequance component is a step in a serial workflow used to call a data repository (which in most cases is usually the Commerce Server pipelines or databases) and map to and from a Commerce Entity object whilst enforcing any business rules. So the first step in the process is to add a new class library to your existing Commerce Server site. You will need to use a new library as Sequence Components will need to be strongly named to be deployed. Once you are inside of your new project, add a new class file and add a reference to the Microsoft.Commerce.Providers, Microsoft.Commerce.Contracts and the Microsoft.Commerce.Broker assemblies. Now make your new class derive from the base object Microsoft.Commerce.Providers.Components.OperationSequanceComponent and overide the ExecuteQueryMethod. Your screen will then look something similar ot this: As all we are doing on this component is conducting a search we are only interested in the ExecuteQuery method. This method accepts three arguments, queryOperation, operationCache, and response. The queryOperation will be the object in which we receive our search parameters, the cache allows access to the Commerce Server cache allowing us to store regulary accessed information, and the response object is the object which we will return the result of our search upon. Inside this method is simply where we are going to inject our logic for our third party search platform. As I am not going to explain the inner-workings of actually making a SOLR call, I'll simply provide the sample code here. I would highly recommend however looking at the SolrNet wiki as they have some great explinations of how the API works. What you will find however is that there are some further extensions required when attempting to integrate a custom search provider. Firstly you out of the box the CommerceQueryOperation you will receive into the method when conducting a search against a catalog is specifically geared towards a SQL Full Text Search with properties such as a Where clause. To make the operation you receive more relevant you will need to create another class, this time derived from Microsoft.Commerce.Contract.Messages.CommerceSearchCriteria and within this you need to detail the properties you will require to allow you to submit as parameters to the SOLR search API. My exmaple looks like this: [DataContract(Namespace = "http://schemas.microsoft.com/microsoft-multi-channel-commerce-foundation/types/2008/03")] public class CommerceCatalogSolrSearch : CommerceSearchCriteria { private Dictionary<string, string> _facetQueries;   public CommerceCatalogSolrSearch() { _facetQueries = new Dictionary<String, String>();   }     public Dictionary<String, String> FacetQueries { get { return _facetQueries; } set { _facetQueries = value; } }   public String SearchPhrase{ get; set; } public int PageIndex { get; set; } public int PageSize { get; set; } public IEnumerable<String> Facets { get; set; }   public string Sort { get; set; }   public new int FirstItemIndex { get { return (PageIndex-1)*PageSize; } }   public int LastItemIndex { get { return FirstItemIndex + PageSize; } } }  To allow you to construct a CommerceQueryOperation call within the API you will also need to construct another class to derived from Microsoft.Commerce.Common.MessageBuilders.CommerceSearchCriteriaBuilder and is simply used to construct an instance of the CommerceQueryOperation you have just created and expose the properties you want set. My Message builder looks like this: public class CommerceCatalogSolrSearchBuilder : CommerceSearchCriteriaBuilder { private CommerceCatalogSolrSearch _solrSearch;   public CommerceCatalogSolrSearchBuilder() { _solrSearch = new CommerceCatalogSolrSearch(); }   public String SearchPhrase { get { return _solrSearch.SearchPhrase; } set { _solrSearch.SearchPhrase = value; } }   public int PageIndex { get { return _solrSearch.PageIndex; } set { _solrSearch.PageIndex = value; } }   public int PageSize { get { return _solrSearch.PageSize; } set { _solrSearch.PageSize = value; } }   public Dictionary<String,String> FacetQueries { get { return _solrSearch.FacetQueries; } set { _solrSearch.FacetQueries = value; } }   public String[] Facets { get { return _solrSearch.Facets.ToArray(); } set { _solrSearch.Facets = value; } } public override CommerceSearchCriteria ToSearchCriteria() { return _solrSearch; } }  Once you have these two classes in place you can now safely cast the CommerceOperation you receive as an argument of the overidden ExecuteQuery method in the SequenceComponent to the CommerceCatalogSolrSearch operation you have just created, e.g. public CommerceCatalogSolrSearch TryGetSearchCriteria(CommerceOperation operation) { var searchCriteria = operation as CommerceQueryOperation; if (searchCriteria == null) throw new Exception("No search criteria present");   var local = (CommerceCatalogSolrSearch) searchCriteria.SearchCriteria; if (local == null) throw new Exception("Unexpected Search Criteria in Operation");   return local; }  Now you have all of your search parameters present, you can go off an call the external search platform API. You will of-course get proprietry objects returned, so the next step in the process is to convert the results being returned back into CommerceEntities. You do this via another extensibility point within the Commerce Server API called translatators. Translators are another separate class, this time derived inheriting the interface Microsoft.Commerce.Providers.Translators.IToCommerceEntityTranslator . As you can imaginge this interface is specific for the conversion of the object TO a CommerceEntity, you will need to implement a separate interface if you also need to go in the opposite direction. If you implement the required method for the interace you will get a single translate method which has a source onkect, destination CommerceEntity, and a collection of properties as arguments. For simplicity sake in this example I have hard-coded the mappings, however best practice would dictate you map the objects using your metadatadefintions.xml file . Once complete your translator would look something like the following: public class SolrEntityTranslator : IToCommerceEntityTranslator { #region IToCommerceEntityTranslator Members   public void Translate(object source, CommerceEntity destinationCommerceEntity, CommercePropertyCollection propertiesToReturn) { if (source.GetType().Equals(typeof (SearchProduct))) { var searchResult = (SearchProduct) source;   destinationCommerceEntity.Id = searchResult.ProductId; destinationCommerceEntity.SetPropertyValue("DisplayName", searchResult.Title); destinationCommerceEntity.ModelName = "Product";   } }  Once you have a translator in place you can then safely map the results of your search platform into Commerce Entities and attach them on to the CommerceResponse object in a fashion similar to this: foreach (SearchProduct result in matchingProducts) { var destinationEntity = new CommerceEntity(_returnModelName);   Translator.ToCommerceEntity(result, destinationEntity, _queryOperation.Model.Properties); response.CommerceEntities.Add(destinationEntity); }  In SOLR I actually have two objects being returned – a product, and a collection of facets so I have an additional translator for facet (which maps to a custom facet CommerceEntity) and my facet response from SOLR is passed into the Translator helper class seperatley. When all of this is pieced together you have sucessfully completed the extensiblity point coding. You would have created a new OperationSequanceComponent, a custom SearchCritiera object and message builder class, and translators to convert the objects into Commerce Entities. Now you simply need to configure them, and can start calling them in your code. Make sure you sign you assembly, compile it and identiy its signature. Next you need to put this a reference of your new assembly into the Channel.Config configuration file replacing that of the existing SQL Full Text component: You will also need to add your translators to the Translators node of your Channel.Config too: Lastly add any custom CommerceEntities you have developed to your MetaDataDefintions.xml file. Your configuration is now complete, and you should now be able to happily make a call to the Commerce Foundation API, which will act as a proxy to your third party search platform and return back CommerceEntities of your search results. If you require data to be enriched, or logged, or any other logic applied then simply add further sequence components into the OperationSequence (obviously keeping the search response first) to the node of your Channel.Config file. Now to call your code you simply request it as per any other CommerceQuery operation, but taking into account you may be receiving multiple types of CommerceEntity returned: public KeyValuePair<FacetCollection ,List<Product>> DoFacetedProductQuerySearch(string searchPhrase, string orderKey, string sortOrder, int recordIndex, int recordsPerPage, Dictionary<string, string> facetQueries, out int totalItemCount) { var products = new List<Product>(); var query = new CommerceQuery<CatalogEntity, CommerceCatalogSolrSearchBuilder>();   query.SearchCriteria.PageIndex = recordIndex; query.SearchCriteria.PageSize = recordsPerPage; query.SearchCriteria.SearchPhrase = searchPhrase; query.SearchCriteria.FacetQueries = facetQueries;     totalItemCount = 0; CommerceResponse response = SiteContext.ProcessRequest(query.ToRequest()); var queryResponse = response.OperationResponses[0] as CommerceQueryOperationResponse;   // No results. Return the empty list if (queryResponse != null && queryResponse.CommerceEntities.Count == 0) return new KeyValuePair<FacetCollection, List<Product>>();   totalItemCount = (int)queryResponse.TotalItemCount;   // Prepare a multi-operation to retrieve the product variants var multiOperation = new CommerceMultiOperation();     //Add products to results foreach (Product product in queryResponse.CommerceEntities.Where(x => x.ModelName == "Product")) { var productQuery = new CommerceQuery<Product>(Product.ModelNameDefinition); productQuery.SearchCriteria.Model.Id = product.Id; productQuery.SearchCriteria.Model.CatalogId = product.CatalogId;   var variantQuery = new CommerceQueryRelatedItem<Variant>(Product.RelationshipName.Variants);   productQuery.RelatedOperations.Add(variantQuery);   multiOperation.Add(productQuery); }   CommerceResponse variantsResponse = SiteContext.ProcessRequest(multiOperation.ToRequest()); foreach (CommerceQueryOperationResponse queryOpResponse in variantsResponse.OperationResponses) { if (queryOpResponse.CommerceEntities.Count() > 0) products.Add(queryOpResponse.CommerceEntities[0]); }   //Get facet collection FacetCollection facetCollection = queryResponse.CommerceEntities.Where(x => x.ModelName == "FacetCollection").FirstOrDefault();     return new KeyValuePair<FacetCollection, List<Product>>(facetCollection, products); }    ..And that is it – simply a few classes and some configuration will allow you to extend the Commerce Server query operations to call a third party search platform, whilst still maintaing a unifed API in the remainder of your code. This logic stands for any extensibility within CommerceServer, which requires excution in a serial fashioon such as call to LOB systems or web service to validate or enrich data. Feel free to use this example on other applications, and if you have any questions please feel free to e-mail and I'll help out where I can!

  Read the article

• CodePlex Daily Summary for Saturday, April 07, 2012

  CodePlex Daily Summary for Saturday, April 07, 2012Popular ReleasesHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.30: changes NEW: Added Support for "DirectUpload.net" links NEW: Added Support for "PixRoute.com" links NEW: Added Support for "ImagePicasa.com" links FIXED: "PixHub.eu" linksCommunity TFS Build Extensions: April 2012: Release notes to follow...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...ExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-04 v3.1.2 -??IE?????????????BUG（??"about:blank"?...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.New ProjectsAdvertising Management: Ph?n m?m qu?n lý qu?ng cáoAgile Compact Database: It is database for all. AssemblyTransformer: AssemblyTransformer is a tool for modifying .NET assemblies using Mono Cecil. It handles the entire transformation process including strong name signing and offers a simple command-line interface and a basic framework for creating and configuring specific transformations.Cafe For You: Ph?n m?m gi?i thi?u và qu?n lý quán cafeClient-side Templated Script Control: Allows a developer to add a repeater-style templated list control to a web page that will be data bound client-side, and may respond to client events. The control may be data bound by a web service call on initialization, and may also have it's data source set via client code.CRM Project - Beginner Sample: Sample to help beginners to start in C# development. Ejemplo para ayudar a quienes inician con el desarrollo en C#.Deployment Made Easy: The goal of this project is to make deployments to windows servers easy using the web deployment toolEasyCMS: EasyCMSExcel to SQL Server Database Bulk Transfer: Quick and simple WPF tool to allow users export data from an Excel spreadsheet to a SQL Server database table. Provided as is. But if you need any help let me know. HTML Client demo for WCF RIA Services: Demo application with HTML client (upshot.js + knockout.js) on WCF RIA ServicesKOI: Kinect Open Interface: Kinect Open Interface, KOI, provides a way to detect and have the user confirm 11 gestures for your UI. Please read my blog for info: http://www.kinecthelp.com/2012/04/koi-kinect-open-interface.htmlLazyWinAdmin: LazyWinAdmin is a Powershell script to manage local or remote machine ressources.LCDSmartie dll to display Audio spectrum on Windows 7: An LCDSmartie plugin that displays anything being played as an audio spectrum.LiveHelpChatApp: With Live chat help you can provide online / Offline help to your client it has facebook style chat for online and offline users Download and EnjoyMailSender: Small tool for sending mail messages contains multiple attachements with sum size bigger than allowed size. You can drag'n'drop attachments and click send - application split all attachments to parts and sent it separately. There is not address book yet. Mauricio: Mauricio Lima PageMiddleware and Enterprise services foundation: Define a model of deployment and management for Middleware and enterprise applicationsMyFirstPro: This is a test projOld Games Launcher: Old Games Launcher is a combined DosBox frontend & a Direct Draw game/application starter.Pharmakos Studio: Pharmakos Studio is an extensible IDE. It was originally written specifically as an UnrealScript editor for the UDK, however it is being written so that any language can be supported via plugins.Proyecto Eclipse-Android: Proyectos con Eclipse-AdroidProyectos II: Proyecto para Farmaciapullsource: pull source directsource filterQuizzer: Awesome program for quizzes and tests.Solution Settings for Visual Studio: Solution Settings for Visual Studio allows a file containing settings such as formatting, fonts and colors to be included with a project. When the solution is opened, these settings are automatically applied, and when it is closed, the changes are reverted.sundance: test test testWebcomic Reader: A little Idea for an on-, and offline usable, touch-friendly Windows 7 Webcomic Reader.WinRT PathTextBlock: WinRT PathTextBlock is a control that overcomes some of the limitations in the built in WinRT TextBlock, such as not being able to outline the text, and not being able to distort the text, for example to draw it along a circle. Previously, you could use a tool like Expression Design to create the text and export it as a Path, but this wouldn't work for text that needed to be specified at run time. This control allows you to specify the Text property and it will generate the proper Path obj...Yaplex open source projects: Yaplex open source projects????API SDK-VB6(oauth2): ????API SDK-VB6(oauth2)????????API SDK VB6: ??????????API SDK vb?

  Read the article

• CodePlex Daily Summary for Friday, April 06, 2012

  CodePlex Daily Summary for Friday, April 06, 2012Popular ReleasesBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...Community TFS Build Extensions: April 2012: Release notes to follow...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...ExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-04 v3.1.2 -??IE?????????????BUG（??"about:blank"?...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsDotNet.Highcharts: DotNet.Highcharts 1.2 with Examples: Tested and adapted to the latest version of Highcharts 2.2.1 Fixed Issue 359: Not implemented serialization array of type: System.Drawing.Color[] Fixed Issue 364: Crosshairs defined as array of CrosshairsForamt generates bad Highchart code For the example project: Added newest version of Highcharts 2.2.1 Added new demos to How To's section: Bind Data From Dictionary Bind Data From Object List Custom Theme Tooltip Crosshairs Theming The Reset Button Plot Band EventsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...New Projects.Net Mutation Testing Tool: This tool will help for making and unit testing mutation changes. Mutation tests improve unit tests and applications.African Honey Bee Application Suite: This is the home of the software behind the African Honey Bee community enrichment project.Create Schema: Object extension method that generates schema creation scripts in SQL (MS SQL SERVER) from c# classes to rapidly get database tables from an existing class structure. Just edit the scripts (they are just guesses of how the database should look) to make them fit your database needs and then run them as a query in SQL Server. Check out vecklare.blogspot.se for more examples. CrtTfsDemo: demo project to test code review tool integration with tfsDolphins Salaam: This Library is a Cross Platform, UDP Broadcast solution for Peer to Peer network client detection. It is written in pure C# and is Mono and .Net compatible. It has been tested on Mac OS X, Windows, Linux, iOS, Android, Xbox and it is expected to be compatible with every other Mono compatible platform. The library is ready to use out of box and there is almost zero configurations needed for it to start working, regarding that, it is also flexible and configurable for your needs.Enhanced Content Query Webpart: This Enhanced Content Query Webpart for SharePoint 2010 is meant for the advanced application developer. You will be able to create any rollup of pages of any Content Type(s), Site Column(s) from any subsite(s) with (any) style you want. Xslt skills are required.fangxue: huijiaFrameworkComponent: frameworkcomponent 4 companyFsXna3DGame: 3D game written in XNA and F# (still very much a work in progress)GeoLock: GeoLock is a proof of concept (PoC). GeoLock demonstrates how to retrieve geolocation data from surrounding Wi-Fi networks triangulation without Global Positioning System (GPS) hardware. grab-libs: A quick hack to bundle up the shared libraries needed to run an i386 executable on an x86_64 machine.Logical Game Of Life: Make Logic Component with a game of life algoritmMagic Box: Magic Box is the application for "hiding" files in NTFS file system. NTFS Alternate Data Streams are used for this.Notes: Application to create fast notes on your Windows Phone.Orchard Google Infographics: **NOTE: Only works with Orchard >= v1.4** This module leverages Google's Infographics api for generating QR codes for each content item that uses the Orchard.Autoroute part. The api documentation may be found at https://developers.google.com/chart/infographics/docs/qr_codesOutlook Calendar Cleaner: If you port your email from a Lotus Notes server to Exchange Server or to Office 365, your Mac Outlook calendar items may be missing. This includes calendar appointments and meeting requests. This may include items that were ported over and also new items created after the port.Polarity: Polarity is a plugin-oriented bot written in C# for deviantArt chat written with simplicity and ease of use for plugin developers as the number one goal.Pool Game Paradise: Pool Game Club of Augmentum Inc. Wuhan Site.RCT2 DatChecker: A utility for Rollercoaster Tycoon 2 that catalogs, displays, and helps manage object files (*.DAT). Examine objects frame by frame or copy object images to the clipboard. Sort objects by size, type, or content. Use DatChecker to find and remove unwanted or duplicate objects, or RecipeML Manager: This project creates C# classes that support the RecipeML standard. It also enhances that standard to support full daily and weekly menus.s0t0o0c0k3246352543: 345234324324324324ScoutGames: scout games portalSharePoint All Page Scripting: This solution is the skeleton of the JavaScript loading in all pages on the SharePoint site collection. This solution can be deployed as a "sandbox solution". Supports the Office365 of course. ??????????SharePoint ?????????????????????????Java?????????????。 ????????????????????????。 ???、????Office365?????????。testtom04052012git02: testtom04052012git02testtom04052012tfs01: testtom04052012tfs01testtom04052012tfs03: testtom04052012tfs03Visual Studio Pattern Automation Toolkit (VSPAT): VSPAT is a set of development and deployment tools from Microsoft that generate and execute Visual Studio extensions called 'Pattern Toolkits' that redeliver best practices, expertise and proven solutions faster, more reliably and more consistently. If you are an *IT professional* are you are looking to build and deploy custom solutions that include proven best practices to improve quality, consistency and time to market. And if you wish to spend significantly less time having to learn all...Wet: Wet, the game.WPF Data Editors: WPF Data Editor controls contains most of editor controls in WPF.xSolon Instructions: Framework to run scripts

  Read the article

• CodePlex Daily Summary for Wednesday, April 04, 2012

  CodePlex Daily Summary for Wednesday, April 04, 2012Popular ReleasesExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-04 v3.1.2 -??IE?????????????BUG（??"about:blank"?...totalem: version 2012.04.04.1: devel releaseNShape - .Net Diagramming Framework for Industrial Applications: NShape 2.0.0: Changes in 2.0.0:New / Changed / Extended Interfaces: public interface ISecurityManager public interface ISecurityDomainObject public interface IModelObject : ISecurityDomainObject public interface ILayerCollection : ICollection<Layer> public interface IRepository public interface ICommand public interface IModelMapping For details on interface changes, see documentation. For more changes on namespaces and base classes, see ReadMe.txt (installation folder) or Changes.txt in the s...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.1: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon setsnopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...SkyDrive Connector for SharePoint: SkyDriveConnector for SharePoint: SkyDriveConnector for SharePointWiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.Lightbox Gallery Module for DotNetNuke: 01.11.00: This version of the Lightbox Gallery Module adds the following features/bug fixes: Feature: Read image EXIF information Bug Fix: URL parsing bug for any folder provider Minimum System Requirements Please ensure that your environment meets or exceeds the following system requirements: DotNetNuke® Version 06.00.00 or higher SQL Server 2005 or later .Net Framework 3.5 SP1 or lateriTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryGoogleMap Control: Google Geocoder 1.3: Geo types changes to string type and GeoAddressType enum changes to static class with some known types as constants in order to resolve the problems with new and not defined geo types.Document.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesNew ProjectsASP.Net MVC Composite Application Framework: ASP.NET MVC Composite Application FrameworkaTimer : Take a break timer: This timer will help programmers and other people who work on computer for long periods, users will be able to set their time period for work and break, whether you want to enforce the break by hibernating or making your computer sleep. Will be good for eyes, a lot! Still under development and will be monthly revised.Avilander Maven: Projeto Disciplina Branquinho.Banner from Databases: make a banner from database informationCrmXpress OptionSet Manager For Microsoft Dynamics CRM 2011: CrmXpress OptionSet Manager For Microsoft Dynamics CRM 2011CSharpCodeLineCounter: Count code lines as Code Metrics do.Decatec Sharepoint code: Various Decatec Sharepoint codeDevWebServer: DevWebServer is a simple, lightweight web server which can be used for unit testing HTTP client applications. It is developed in C#, has minimal dependencies and is provided as a single assembly.Effect Architect: A real-time effect editor (currently) aimed at Direct3D9. The idea is to bring features that popular IDEs provide to HLSL coding, as well as features that are specific to graphical coding.Gpu Hough: Demo project performing Hough transformation on GPUHappyHourWin8: This project contains several Metro-App development approaches. There will be an RSS-Reader, a task list and a game. Home Media Center: Home Media Center is a server application for UPnP / DLNA compatible devices. It supports streaming and transcoding media files, Windows desktop and video from webcams. This project is developed in C#, C++ and uses DirectShow, Media Foundation.INSTEON Mayhem Module: INSTEON module for Mayhem application.ISService: ISServiceKEITH: Kinect for hospitalsKnowledge Exchange: KnowledgeExchangeLightweight Test Automation Framework: The Lightweight Test Automation Framework for ASP.NET was developed and is currently used by the ASP.NET QA Team to automate regression tests for the product. It is designed to run within an ASP.NET application. Tests can be written in any .NET Framework language. They use an APlinewatchdk: linewatchdkLuaForMono: c#?lua?????,??LuaInterface??luaSharp???,?????????(luaInterface)??lua??c#?????????(luasharp),??mono?linux????????lua??.Metro App Toolkit: The Metro App Toolkit provides the developer community with key components and functionality that are commonly used in Metro Apps for WindowsPhone, Windows8 and the web, including Networking! Toolkit releases include samples & docs. From the community, for the community. My IE Accelerators: 1. dict.cn ie accelaratorofm: ofmOrchard Clippy module: Orchard Clippy moduleOrchard Twitter module: Orchard Twitter modulePersian Subtitle For Programming Courses: This project is created for collecting all programming course's PERSIAN SUBTITLE and help Persian language student to learn programming and every thing related to their major, by Meysam Hooshmandpicking: pickingPomodoro Timer for Visual Studio: Keep track of your Pomodoro Technique (from the Pomodoro Technique® official website – www.pomodorotechnique.com) sessions in Visual Studio.ScriptSafe: A simple powershell wrapper around source control aimed at admins to enable simple source control for their scripts.SkyDrive Connector for SharePoint: SkyDrive Connector for SharePoint is a sandbox web part that can help manage documents stored on skydrive on sharepoint by adding additional metadata. This helps the document to be discoverable on SharePoint. Also SkyDrive provides 25GB for free space for live users.SkypeTranslator: Help users to translate incoming message from Skype and Outlook applications to specified language. In core was use Elysium , log4net , and WPF frameworks, WPF Toolkit Extended,TPL,WCFTalking Heads: The TalkingHeads is a simple social network written in ASP .NET 4.0. It is intended for demonstrating and exploring application monitoring features of AVIcode technology. It works great with AVIcode 5.7, as well as with APM feature in System Center 2012. Unik Project: Unik is a Unified Framework makes easier to create enterprise .NET applications based on architecture best practice.WV-CU950 System Controller .NET Library.: WV-CU950 System Controller .NET library for Panasonic WV-CU950 System Controller. This library contains data processing method.YO JACK!: <Project name>Yo Jack!</Project name> Gather evidence to track down a physical theft of your computer, and turn over to the police. Free to the public.???????: ???????？

  Read the article

• CodePlex Daily Summary for Sunday, April 08, 2012

  CodePlex Daily Summary for Sunday, April 08, 2012Popular ReleasesExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG（??）。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesText Designer Outline Text: Version 2 Preview 2: Added Fake 3D demos for C++ MFC, C# Winform and C# WPFLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...GeoMedia PostGIS data server: PostGIS GDO 1.0.1.2: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed problem with renaming and deleting feature classes - IMPORTANT! - the gfeatures view must be recreated so that this issue is completely fixed. The attached script "GFeaturesView2.sql" can be used to accomplish this task. Another way is to drop and recreate the metadat...SkyDrive Connector for SharePoint: SkyDrive Connector for SharePoint: Fixed a few bugs pertaining to live authentication Removed dependency on Shared Documents Removed CallBack web part propertyClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsNew ProjectsCameraSudokuSolver: Sudoku solver through camera for AndroidCardboardBox: This is a WPF based client application for the danbooru.donmai.us image board.Cloud in Net: Cloud in NetDataStoreCleaner: DataStoreCleaner clears "DataStore" folder which manages Windows Update History. It is useful for fixing WU error, or tune up Windows start-up. It's developed in C#.E-Ticaret - Sanal Magaza: Temel olarak gelismis e-ticaret sistemlerinin temel özelliklerini bulundurucak ve yönetecek bir sistem olacaktir. Sonrasinda ek gelistirmeler için özel çalismalar yapilacaktir.Finding all factors: this is a simple Winform application for finding all factors or divisors of a given number. i think is a simple example for learning how to work with essential backgroundWorker class .FlashGraphicBuilder: Simple graphic builder on AS3IpPbxImportRR: Command-line tool to import or export routing records to/from a SwyxWare VoIP PBX. This is a sample application showing how to use the SwyxWare Configuration API (CDS API). Use it at your own risk.KNX.net: KNX.net provides a KNX API for C#LevelDesigner: LevelDesignerN2F Yverdon Sanitizers: A system to help ease the pain of sanitizing data. The system comes with some basic sanitizers as well as the framework necessary to enable easy development of custom sanitizers.nAPI for Windows Phone: Windows Phone library for using Naver(R)'s open API service. (This project is 3rd party library project, NOT a NHN/Naver's official project) For more info about Naver Open API: http://dev.naver.com/openapi/NJena (Semantic Web Framework for .NET): A .NET source-level port of the Jena frameworkNWTCompiler: NWTCompiler is for those interested in creating their own compiled database of the New World Translation of the Holy Scriptures from the watchtower.org sources. Formats such as e-Sword are supported.Odin Game Engine: Odin is an attempt at mixing Windows Forms and XNA in the goal of making a game engine.qq: qqRanmal MVC Work: It is my Knowledge Exchange projectRichCode: RichCode is a UserControl that is easy to use, allows the custom syntax highlighting without much effortRUPSY Download manager: RUPSY Download managerSDCBCWEB: This is a web application for a class project. The goal is to create a content management system to be used for educational purposes by a nonprofit.Snake Game: Kursinis darbasSpec Pattern: Spec Pattern is a simple yet powerful implementation of specification pattern in C#. Relying in IQueryable it covers the three requirements this patterns aims to solve - Validation - Querying - BuildingSteel Brain: An open source project which aims to implement a neural net framework in unmanaged C++. The longer term describes why I chose C++ over the phenomenal C# which is creating a neural net that can harness the power of GPGPU's by using the OpenCL library. (I'm not a beleiver of projects that tries to provide solutions to developers who dont want to come out of the managed, cozy C# context) Sunday: Another Web Content Management System.TO7 License Plate Recognition: This project is part of a college assignment.ts: tsUnofficial RunUO: This project is a fork of the popular Ultima Online emulation software RunUO ( http://www.runuo.com ) The main difference between this repository and the official RunUO is that this project is fully set up and ready to launch in Visual Studio 2010, with full .NET 4.0 support!VibroStudio: Application for edit, view and process vibrosignalsWindows Phone AR.Drone controller: The Windows Phone AR.Drone controller is a controller library and client application for Windows Phone 7.1. It is written in C#.XamlImageConverter: A tool to convert Xaml to images. - It implements an MSBuild task that can be imported in any project to convert xaml to images in a project - It implements a HttpHandler that converts xaml to images on the fly. XEFFEX: XEFFEX is a play off the piano gadget. The shapes were manipulated and the sounds are set to different effects. The end goal was too have the pads play a sound and execute a program the user can pre-choose. The options menu allows quit access to your files. XiaMiRingtone: ?????windows phone??。 ???????，????????，???????????。

  Read the article

• CodePlex Daily Summary for Monday, April 09, 2012

  CodePlex Daily Summary for Monday, April 09, 2012Popular ReleasesStyleCop+: StyleCop+ 1.8: Built over StyleCop 4.7.17.0 According to http://stylecop.codeplex.com/workitem/7156, it should be the last version which is released without new features and only for compatibility reasons. Do not forget to Unblock the file after downloading (more details) Stay tuned!Path Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.ExtAspNet: ExtAspNet v3.1.3: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-08 v3.1.3 -??Language="zh_TW"?JS???BUG（??）。 +?D...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.5: New Controls ChatBubble ChatBubbleTextBox OpacityToggleButton New Stuff TimeSpan languages added: RU, SK, CS Expose the physics math from TimeSpanPicker Image Stretch now on buttons Bug Fixes Layout fix so RoundToggleButton and RoundButton are exactly the same Fix for ColorPicker when set via code behind ToastPrompt bug fix with OnNavigatedTo Toast now adjusts its layout if the SIP is up Fixed some issues with Expression Blend supportHarness - Internet Explorer Automation: Harness 2.0.3: support the operation fo frameset, frame and iframe Add commands SwitchFrame GetUrl GoBack GoForward Refresh SetTimeout GetTimeout Rename commands GetActiveWindow to GetActiveBrowser SetActiveWindow to SetActiveBrowser FindWindowAll to FindBrowser NewWindow to NewBrowser GetMajorVersion to GetVersionBetter Explorer: Better Explorer 2.0.0.861 Alpha: - fixed new folder button operation not work well in some situations - removed some unnecessary code like subclassing that is not needed anymore - Added option to make Better Exlorer default (at least for WIN+E operations) - Added option to enable file operation replacements (like Terracopy) to work with Better Explorer - Added some basic usability to "Share" button - Other fixesText Designer Outline Text: Version 2 Preview 2: Added Fake 3D demos for C++ MFC, C# Winform and C# WPFLightFarsiDictionary - ??????? ??? ?????/???????: LightFarsiDictionary - v1: LightFarsiDictionary - v1WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.3: Version: 2.5.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete [O] WAF: Mark the StringBuilderExtensions class as obsolete because the AppendInNewLine method can be replaced with string.Jo...GeoMedia PostGIS data server: PostGIS GDO 1.0.1.2: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed problem with renaming and deleting feature classes - IMPORTANT! - the gfeatures view must be recreated so that this issue is completely fixed. The attached script "GFeaturesView2.sql" can be used to accomplish this task. Another way is to drop and recreate the metadat...SkyDrive Connector for SharePoint: SkyDrive Connector for SharePoint: Fixed a few bugs pertaining to live authentication Removed dependency on Shared Documents Removed CallBack web part propertyClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.New ProjectsAprilSpring: Common Framework by pansq and huangghASP.Net MVC Dynamic JS/CSS Script Compression Framework: ASP.Net MVC JS and CSS dynamic script compression and composite script library. Also resolves virtual content urls in CSS files.BANews: ???????????????????，??SQL+Server2008，C#，asp.net????，??????Jquery?CSS+DIV??。??????，?????????????，????????，??????，??。Blazonisation: If have emblem of some state, but don't know anything about it, you can use this tool to resolve your problem. Controle de Campenato: Outro Projeto com alunos da Infnet onde desenvolveremos um controle de campeonato...Controle Financeiro Pessoal Web: Projeto desenvolvido com os alunos do curso Oficial da Microsoft na INFNET. Consiste em controlar as despesas e receitas durante o mes e realizar uma projeção sobre os próximos meses. Bons Estudos, Prof. Carlos PedroCoPro - The .NET Content Provisioning Framework: CoPro makes content management, localization and globalization for ASP.NET Developers easier. It provides a framework which takes care of all management and provisioning activities and the developer only has to create the content and place it on the site. It is developed in C#.cppERF: Class ERF function. Test on VC++ 2008 express, and cygwin.Dev Studio 17 Web-Based FTP Client: Dev Studio 17 Web-Based FTP Client is a web based ftp application built using asp.net, c#.EasyCRMNet: EasyCRMNetEnterpriseLibrary Azure Backing Store: Most developers face difficulties in migrating the application, which is using caching block of Enterprise library, to azure due to unavailability of app fabric cache backing store for Enterprise Library. This library provides an app fabric backing store for enterprise library.Event Aggregator: One of the key aspects in application design is managing dependencies between modules. Good architecture might begin to suffer from strong coupling as long as the project grows. All this affects further development by making it harder to change modules (a change in one module usually forces a ripple effect of changes in other modules), also strongly coupled modules are harder to reuse and test. Message coupling is a good choice in developing loosely coupled architecture. This is the looses...FarhadYazdan-Panah Personal Repsitory: A place for backupFluent Assertions MVC: MVC Extensions for Fluent Assertions library. Source Code is on GitHub: https://github.com/CaseyBurns/FluentAssertions.MVCGboot: GtalkBotGetPicture: GetPicture is a project that get some pictures at a website.It is not good,just use to study.gmfbridge: clone for gmfbridge http://www.gdcl.co.uk/gmfbridge/GoodStore: ??????????，??B/S??，asp.net?sqlserver???，???????，?????????。。。JSLint for Resharper: Adds highlighting of JSLint validation errors to Resharper. kiemtien: Alpha state website, very unstable.nuIDE Kinect Prototype (Experimental): Prototype for Kinect-integrated Visual Studio extension concept. (Not yet alpha - throw away code)PB-LOG-Quick and easy XML logger for .NET: PB-LOG is a quick and easy XML logger for all kink of .NET application. You can insert log associated to a user. There're 4 kind of log: Error, Info, Warning, Event. It's developed in C# 4. There's also a PB-LOG for WP7.PB-LOG-WP7-Quick and easy XML logger for Windows Phone 7: PB-LOG is a quick and easy XML logger for all Windows Phone 7. You can insert log associated to a user. There're 4 kind of log: Error, Info, Warning, Event. It's developed in C# 4.Persian_Calendar_for_Microsoft_Office: "Persian_Calendar_for_Microsoft_Office" makes it easier for Office user group to do their tasks according to time-sheets in IRAN. You'll no longer have to depend on other forms of calendar. It would be developed in any programming language esp C#.Projeto Agenda FPU: Projeto AgendaPS Framework: PS.Framework is an Application Framework to simplify the developement of .NET Applications. It's containing many helpfull classes and functions e.g. an RemotingInterface to simplify the use of .NET Remoting.Quizzer123: Awesome application for quizzes and tests!SharePoint 2010 Automatic Content Database Selection: This solution for SharePoint 2010 automatically selects the smallest content database when you create a new site collection in a web application.SIToFb2: samizdat to bf2 converterSmart Logger: SmartLogger is a web service that can consume exceptions thrown from client applications. The exceptions can be categorized based on severity, applications and exception time stamp. It also includes a search feature to drill down the exceptions log based on search criteria. The release 1.0 will include logging exceptions with search feature. Adding new applications and user right management will follow.Sync Sync: [image:365572] A SharePoint ETL and migration toolTestCuttingStockUsingSolverFoundation: using solver foundation from msft to solve civ e 606 group assignment 2, the cutting stock problem.Vote: ?，???????????????！??，????，?????！WebFurniture: Web-?????????? ??? ?????????????? ????????? ???????yammyy2: yammyy2 zhongjh: ?????????，???????。

  Read the article

• CodePlex Daily Summary for Thursday, April 05, 2012

  CodePlex Daily Summary for Thursday, April 05, 2012Popular ReleasesCommunity TFS Build Extensions: April 2012: Release notes to follow...ClosedXML - The easy way to OpenXML: ClosedXML 0.65.2: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks) New on v0.65.1 Fixed issue when loading conditional formatting with default values for icon sets New on v0.65.2 Fixed issue loading conditional formatting Improved inserts performanceLiberty: v3.2.0.0 Release 4th April 2012: Change Log-Added -Halo 3 support (invincibility, ammo editing) -Halo 3: ODST support (invincibility, ammo editing) -The file transfer page now shows its progress in the Windows 7 taskbar -"About this build" settings page -Reach Change what an object is carrying -Reach Change which node a carried object is attached to -Reach Object node viewer and exporter -Reach Change which weapons you are carrying from the object editor -Reach Edit the weapon controller of vehicles and turrets -An error dia...MSBuild Extension Pack: April 2012: Release Blog Post The MSBuild Extension Pack April 2012 release provides a collection of over 435 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUID’...DotNetNuke® Community Edition CMS: 06.01.05: Major Highlights Fixed issue that stopped users from creating vocabularies when the portal ID was not zero Fixed issue that caused modules configured to be displayed on all pages to be added to the wrong container in new pages Fixed page quota restriction issue in the Ribbon Bar Removed restriction that would not allow users to use a dash in page names. Now users can create pages with names like "site-map" Fixed issue that was causing the wrong container to be loaded in modules wh...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.3.1: One Click Install from NuGet Changes to Version 2.1.3.11. [assembly: AllowPartiallyTrustedCallers] has been added back into the AssemblyInfo.cs file to prevent failures with other assemblies in Medium trust environments. 2. The Lite data embedded into the assembly has been updated to include devices from December 2011. The 42 new RingMark properties will return Unknown if RingMark data is not available. Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla...MVC Controls Toolkit: Mvc Controls Toolkit 2.0.0: Added Support for Mvc4 beta and WebApi The SafeqQuery and HttpSafeQuery IQueryable implementations that works as wrappers aroung any IQueryable to protect it from unwished queries. "Client Side" pager specialized in paging javascript data coming either from a remote data source, or from local data. LinQ like fluent javascript api to build queries either against remote data sources, or against local javascript data, with exactly the same interface. There are 3 different query objects exp...ExtAspNet: ExtAspNet v3.1.2: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-04 v3.1.2 -??IE?????????????BUG（??"about:blank"?...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.50: Highlight features & improvements: • Significant performance optimization. • Allow store owners to create several shipments per order. Added a new shipping status: “Partially shipped”. • Pre-order support added. Enables your customers to place a Pre-Order and pay for the item in advance. Displays “Pre-order” button instead of “Buy Now” on the appropriate pages. Makes it possible for customer to buy available goods and Pre-Order items during one session. It can be managed on a product variant ...WiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryDocument.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsDotNet.Highcharts: DotNet.Highcharts 1.2 with Examples: Tested and adapted to the latest version of Highcharts 2.2.1 Fixed Issue 359: Not implemented serialization array of type: System.Drawing.Color[] Fixed Issue 364: Crosshairs defined as array of CrosshairsForamt generates bad Highchart code For the example project: Added newest version of Highcharts 2.2.1 Added new demos to How To's section: Bind Data From Dictionary Bind Data From Object List Custom Theme Tooltip Crosshairs Theming The Reset Button Plot Band EventsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!New Projects20120229Site1: 29/02/2012 site5B12: Un servizio WCF .NET 4.0 fruibile in modalità REST da Android e IOS IPhone e IPad. Realizzato dai ragazzi di 5BI Informatica dell'ITIS L. Da Vinci - Rimini A.S. 2011/12Accept Language Setter: Accept Language Setter is a System Tray application that lets you quickly set your browser's Accept Language without having to navigate through your browser's menus. It is ideal for developers and testers who work on internationalized websites and need to switch languages often.AGatherBot: C# 5.0 (.NET Framework 4.5) based Counter-Strike 1.6 Gatherbot, highly extensible (using MEF) and configurable.Aweber API .NET SDK: The Aweber API .NET SDK makes it easier communicating with Aweber's API. It covers the basic parts of the API including, lists, subscribers, campaigns and accounts. It is developed in C# .NET 4.0CINET: Continuous Integration Server developed in .Net with MonoClipster: Manage & watch your videos instantly. A project for the course Human Computer Interaction, CS3240 in National University of SingaporeDyna Bomber: With my friend we will try to reborn old game called Dyna Bober.Fer. CR: Pruebas de Software 2012 - DemoFreeDAM: While looking at DAM (Digital Asset Management) solutions, I have found that some of the paid versions are actually just putting a front-end on top of free tools that are actually doing the heavy lifting. This project will give you the freedom to choose a free-dam solution.golang: Go language LLVM compilerHSDLL: HSDLLJsQueryExpression: JsQueryExpression aims to create a javascript library to generate URIs by using QueryExpression (name is inspired from Microsoft Dynamics CRM but structure is different) object model to query OData resources.KunalPishewsccsemb: KunalPishewsccsembLightFarsiDictionary - ??????? ??? ?????/???????: A light weight farsi-english / engilsh-farsi dictionary optimized for fixing common typo mistakes. ??????? ??? ? ???? ????? ?? ??????? / ??????? ?? ????? ?? ???? ?????? ?????? ?????? ?? ????? ?? ???.losezhang: ???TFS??，???30????！MIC Thailand #9 Foursquare: Sample for Maps and GeolocatiohnMtk: Mtk is a toolkit for ASP.NET MVC and FluentNHibernate.MyTest: test test testOpenSocial container on .NET: .NET implementation of OpenSocial containerOrchard Bootstrap: Bootstrap is an Orchard theme constructed using the Bootstrap template system from Twitter.PetroManager: this is a basic data management application.Portable Xna Components: Portable Xna Components makes it easier and faster for Xna game developers to create their games. Developers using this library don't have to worry about rudimentary tasks like drawing and collision detection. It is written in C#Project Management Plug-Ins: Restores functionality to create Microsoft Visio diagrams from Microsoft Project data, via a Microsoft Project AddIn.Project vit: some projectpruebas2012-1: demo de pruebas de softwarePSW20121: demo de pruebas de swPWS 2012-1: Demo para el curso de PWS UPN Cajamarca 2012 - 1Pws2012-1: Demo de calidad prueba de softwarePWSmodelo-2012-1: Demo Para le curso de pws upnradscommerce: Multi shop ecommerce system for web hoster, retailer for Indian Market and then for others.Randata: A DataProvider framework.Robots In Donutland: A solution for a project at DMU - Intelligent systems and roboticsShopScan - Application WP7 winner of Hackathon le Mobile 2012: Application WP7 winner of Hackathon le Mobile 2012Silverlight Printer Map: This printer map makes it easier for an end user in an enterprise to find and install networked printers. The end user need only find the closest printer on the map of the organization, click on it once and it then allow the program to map the printer, install the driver and set it as default printer. It's developed in C# The backend of this program relies on SharePoint 2010 libraries. See documentation for further information.SquareTasks: Gestionnaire de tâchesStructurizer: A tool to generate tiles for DNA self-assembly. Outputs a 2-dimensional map with corresponding glues which allow for use with any core substrate.WCF Duplex Service on Azure using a Silverlight Client: I had some trouble to build correctly a simple WCF Duplex Service that run on Windows AZURE while the Connection is made anonymously, after a lot of research I decided to share my solutionWord to MS-Test: Converts MS-Word document in a format similiar to FitNesse, to MS-Test source code.WPFModalDialog: Custom modal dialog in Wpf, contains basic controls in dialog window, also allow you to inform user about loading operations, using animated watcherXRM Developer Framework: XRM Developer Framework provides you with a Framework & Tools to easily build Enterprise Dynamics CRM 2011 Solutions using patterns & best practices. The Framework builds on many available technologies such as Visual Studio, CRM Developer Toolkit & Moq.

  Read the article

• Jquery Accordion and Fading

  - by Slick Willis

  I am trying to create a jquery accordion that fades the header of the accordion out when the page is loaded then fades it in when the mouse hovers. The accordion also opens when the mouse hovers. I am able to get all of this working, the problem I am having is when the accordion opens the header moves away and the mouse is no longer on it to keep it lit. I would like the links to keep the header lit as well as if the mouse is on the header itself. Below is the code that I wrote for it. <html> <head <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-1.4.2.min.js'></script> <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-custom-181/jquery-ui-1.8.1.custom.min.js'></script> </head> <body bgcolor="black"> <style = "css/text"> .links { font-family: "Georgia", "Verdana", serif; line-height: 30px; margin-left: 20px; margin-top: 5px; } .Title { font-family: "Geneva", "Verdana", serif; font-weight: bold; font-size: 2em; text-align: left; font-variant: small-caps; border-bottom: solid 2px #25FF00; padding-bottom:5px; margin-bottom: 10px; } </style> <script type="text/javascript"> $(document).ready(function(){ $(".Title").fadeTo(1,0.25); $(".Title").hover(function () { $(this).stop().fadeTo(250,1) .closest(".Title").find(".links").fadeTo(250,0.75); }, function() { $(this).stop().fadeTo(250,0.25); }); }); $(function() { $("#accordion").accordion({ event: "mouseover" }); }); </script> <p>&nbsp</p> <div id="accordion"> <div class="Title"><a href="#"STYLE="TEXT-DECORATION: NONE; color: #25FF00;">Reference</a></div> <div class="links"> <a href="http://docs.jquery.com/Main_Page" STYLE="TEXT-DECORATION: NONE; color: #25FF00;">Jquery Documentation/Help</a><br> <a href="http://stackoverflow.com/" STYLE="TEXT-DECORATION: NONE; color: #25FF00;">Stack Overflow</a><br> <a href="http://www.w3schools.com/" STYLE="TEXT-DECORATION: NONE; color: #25FF00;">w3schools.com</a><br> </div> <div class="Title"><a href="#"STYLE="TEXT-DECORATION: NONE; color: #FF7200;">Gaming</a></div> <div class="links"> <a href="http://docs.jquery.com/Main_Page" STYLE="TEXT-DECORATION: NONE; color: #FF7200;">Jquery Documentation/Help</a><br> <a href="http://stackoverflow.com/" STYLE="TEXT-DECORATION: NONE; color: #FF7200;">Stack Overflow</a><br> <a href="http://www.w3schools.com/" STYLE="TEXT-DECORATION: NONE; color: #FF7200;">w3schools.com</a><br></div> <div class="Title"><a href="#"STYLE="TEXT-DECORATION: NONE; color: #00DEFF;">Grub</a></div> <div class="links"> <a href="http://docs.jquery.com/Main_Page" STYLE="TEXT-DECORATION: NONE; color: #00DEFF;">Jquery Documentation/Help</a><br> <a href="http://stackoverflow.com/" STYLE="TEXT-DECORATION: NONE; color: #00DEFF;">Stack Overflow</a><br> <a href="http://www.w3schools.com/" STYLE="TEXT-DECORATION: NONE; color: #00DEFF;">w3schools.com</a><br> </div> <div class="Title"><a href="#"STYLE="TEXT-DECORATION: NONE; color: #F8FF00;">Drinks</a></div> <div class="links"> <a href="http://docs.jquery.com/Main_Page" STYLE="TEXT-DECORATION: NONE; color: #F9FF00;">Jquery Documentation/Help</a><br> <a href="http://stackoverflow.com/" STYLE="TEXT-DECORATION: NONE; color: #F8FF00;">Stack Overflow</a><br> <a href="http://www.w3schools.com/" STYLE="TEXT-DECORATION: NONE; color: #F8FF00;">w3schools.com</a><br> </div> </div> </body> </html>

  Read the article

• jQuery CSS Custom Flyout Menu Styling Issue

  - by aherrick

  I'm close to nailing this flyout menu I have been working on, just have a couple of current pain points. I'm trying to get left/right padding on my submenu items, as you can see I am not quite there. Also when the first submenu is displayed, I want to create a bit of a gap between the first row of list items and the child. Below is my current code and a screen shot displaying what I want. Based on my current CSS, any thoughts on how to get this done in a clean way? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript"> function mainmenu() { $("#nav ul").css({ display: "none" }); // Opera Fix $("#nav li").hover(function() { $(this).find('ul:first').css({ visibility: "visible", display: "none" }).show(400); }, function() { $(this).find('ul:first').css({ visibility: "hidden" }); }); } $(document).ready(function() { mainmenu(); }); </script> <style type="text/css"> * { padding: 0px; margin: 0px; } body { font-size: 0.85em; font-family: Verdana, Arial, Helvetica, sans-serif; } #nav, #nav ul { margin: 0; padding: 0; list-style-type: none; list-style-position: outside; position: relative; } #nav a { display: block; padding: 4px 0px 4px 0px; color: #dfca90; text-decoration: none; background-color: #ECE9D8; font-size: 9px; font-weight: bold; font: bold 15px Palatino, 'Palatino Linotype' , Georgia, serif; } #nav > li > a { font-size: 16px; font-variant: small-caps; border-right: 1px solid #dfca90; padding-right: 10px; padding-left: 10px; padding-bottom: 6px; padding-top: 6px; background-color: #fff; color: #dfca90; } #nav li ul li a:hover { color: #999; } #nav li { float: left; position: relative; } #nav ul { position: absolute; display: none; width: 170px; border: 2px solid #dfca90; } #nav ul li { } #nav li ul a { width: 170px; height: auto; float: left; } #nav ul ul { top: -2px; } #nav li ul ul { left: 170px; background-color: #ECE9D8; } #nav li:hover ul ul, #nav li:hover ul ul ul, #nav li:hover ul ul ul ul { display: none; } #nav li:hover ul, #nav li li:hover ul, #nav li li li:hover ul, #nav li li li li:hover ul { display: block; } </style> </head> <body> <ul id="nav"> <li><a href="#">1 HTML</a></li> <li><a href="#">2 CSS</a></li> <li><a href="#">3 Javascript </a> <ul> <li><a href="#">3.1 jQuery</a> <ul> <li><a href="#">3.1.1 Download</a> </li> <li><a href="#">3.1.2 Tutorial</a> </li> </ul> </li> <li><a href="#">3.2 Mootools</a></li> <li><a href="#">3.3 Prototype</a></li> </ul> </li> </ul> </body> </html>

  Read the article

• CodePlex Daily Summary for Thursday, December 16, 2010

  CodePlex Daily Summary for Thursday, December 16, 2010Popular ReleasesSharpDropBox Client for .NET: WP7 SharpDropBox Client - 0.1 Technology Preview: I decided to go ahead and release this. It works well for simple browsing folder structure/downloading files (and login works). See samples for an example of how to use it. I am in progress with a couple other methods which aren't currently working.SQL Monitor: SQL Monitor 2.9: 1. automatically set sql for new query if a object is selected(table/sp/function/view)uComponents: uComponents v2.0.1: This release: Fixes a critical issue with IIS 6. Removes various script error issues in Internet Explorer Supports the media picker with advanced dialog and preview. uComponents is a collaborative project for creating components for Umbraco including data types, XSLT extensions, controls and more. Containing 20 data-types, 7 XSLT extension libraries, keyboard short-cuts, drag-n-drop functionality, as well as great developer utilities - uComponents is one of the must-have packages for a...SplendidCRM: SplendidCRM 5.0 Community Edition: SplendidCRM Software has adopted the GNU Affero General Public License Version 3 (AGPLv3) for its Community Edition. This release includes the full set of SQL source code in the Community Edition, something that was previously only available in the Professional and Enterprise Editions. An article on the subject of Commercial Open-Source licensing has been posted at http://www.codeproject.com/KB/architecture/splendid-guide-article6.aspx.DotSpatial: DotSpatial 12-15-2010: This release contains a few minor bug fixes and hopefully the GDAL libraries for the 3.5 x86 build actually built to the correct directory this time.DotNetNuke® Community Edition: 05.06.01 Beta: This is the initial Beta of DotNetNuke 5.6.1. See the DotNetNuke Roadmap a full list of changes in this release.MSBuild Extension Pack: December 2010: Release Blog Post The MSBuild Extension Pack December 2010 release provides a collection of over 380 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GU...Access Control Service Samples and Documentation (Labs): Samples-R3: Contains latest ACS samples (corresponding to R3 release) that show how to integrate ACS with web services, ASP.NET websites (Web Forms and MVC) and on how to interact with the ACS Management Service. The Readmes for these samples are available here.TweetSharp: TweetSharp v2.0.0.0 - Preview 5: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous ...EnhSim: EnhSim 2.2.2 ALPHA: 2.2.2 ALPHAThis release adds in the changes for 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - The spirit ...Silverlight Contrib: Silverlight Contrib 2010.1.0: 2010.1.0 New FeaturesCompatibility Release for Silverlight 4 and Visual Studio 2010FlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????New ProjectsAchievement Information System: AchIS is a software which documented all about student's prestigeAutoMock: AutoMock saves you time when writing unit tests by wiring up all the dependencies as mocks for the class under test.Basic samples: Basic C# samplesBCrypt.Net: A .Net port of jBCrypt implemented in C#. It uses a variant of the Blowfish encryption algorithm’s keying schedule, and introduces a work factor, which allows you to determine how expensive the hash function will be, allowing the algorithm to be "future-proof".Desafio Dot.Net: Projeto para o Desafio DotNetEDAFramework: This is a Estimation of Distribution Algorithm framework.Fluxions: Fluxions is a 3D Graphics Engine designed to make writing simple graphics or visualization projects easy. It is ideal for writing computer games or scientific type work where you need to easily prototype an idea. It includes support for writing OpenGL apps with GLUT or SDL.Guruzan.Com: Guruzan.Com is a new way to share your ideas and especially your claims.. We are about the create a next generation social network which will bring improved standarts and innovations for internet sharing. Our project includes many students from different countries...HotCold: This game loads a board of squares, of which one is randomly selected as the "HOT" square. The goal is to find the "HOT" square in the fewest clicks possible. .InSim.NET: A .NET InSim library for the racing simulator Live for Speed.Javascript Utils: JavaScript Utilitieskoppees: Mingi veebiliidesKVB-Abfahrtstafel: Die KVB-Abfahrtstafel erlaubt es, sich einige Haltestellentafeln im Netz der Kölner Verkehrsbetriebe - inklusive Störungsmeldungen - schon vor dem Verlassen des Büros/Hauses/Hotels am PC anzusehen. Besonders bei miesem Wetter eine echte Erleichterung.Lessons in PivotViewer: The Silverlight PivotViewer is a great control with a great deal of potential. However, there are a lot of questions on how to use and customize the PivotViewer. This project will attempt to answer those questions by providing a series of lessons on the PivotViewer.Liuyi: liuyiLiuyi.network: Liuyi.networkMiniDouBan: MiniDouBanN2F Yverdon Database Helper: A class to aid in performing simple database queries within N2F Yverdon. Also provides the capability to store queries for later use.N2F Yverdon Form Helper: A system that allows interaction with web forms in a fashion similar to that of ASP.NET MVC model binding.N2F Yverdon Sanitizers: A system to help ease the pain of sanitizing data. The system comes with some basic sanitizers as well as the framework necessary to enable easy development of custom sanitizers.Next Question: By Relavance: Next Question makes it easier for System Users, Administrators, Business Analysts, etc to run ad-hoc queries on any data store. Regardless of the type or location of the information, Next Question removes the need for T-SQL programmers to write explicit queries to answer businessNPicConvertDemo: azure test/demo/example projectOpenSprints: OpenSprints for WindowsPML_FahrradVerleih: PML_FahrradVerleih PMS ProjektPowerLib: PowerLib extends .NET Base Class Library functionality with algorithms and data structures. First release would be at next week.ProJect Manager Software: Project Manager Softwareqxtplatform: qxtplatformSencha Direct Stack based on ASP.NET MVC: This project focuses on creating ExtJS/Sencha Direct server stack using ASP.NET MVC.SqlExecuter: Simply run sql scripts against a SQL Server databaseSystem8: Experimental Silverlight project to help understand system 8's behavior (mehod of calibration bottom-quark tagging).TeamManager: Team management software based on silverlight application. It use PRISM and MEF to have flexible and extensible architecture.Umbraco Single Item Picker: Extention to the Umbraco, needs to pick: - Content pages, - Media items, - File System Objects, - Member Items in more "better way" additionally control returns not only item name(title) but also extended information (path, icon). WebSharper Community Samples: WebSharper Community SamplesWindows Phone 7 Charts: Charting component for Windows Phone 7 applications.Windows Phone 7 Silverlight ZXing Barcode Scanning Library: ZXing (pronounced "zebra crossing") is an open-source, multi-format 1D/2D barcode image processing library originally implemented by Google in Java. This is a Silverlight port of the csharp ZXing port created by Suraj Supekar at revision 1202 in the SVN repository. WPF RCON: WPF RCON is a RCON client for COD4 servers. It's RCON library + WPF GUI. It's developed in C#. It's far from being complete.

  Read the article

• Red Gate Coder interviews: Robin Hellen

  - by Michael Williamson

  Robin Hellen is a test engineer here at Red Gate, and is also the latest coder I’ve interviewed. We chatted about debugging code, the roles of software engineers and testers, and why Vala is currently his favourite programming language. How did you get started with programming?It started when I was about six. My dad’s a professional programmer, and he gave me and my sister one of his old computers and taught us a bit about programming. It was an old Amiga 500 with a variant of BASIC. I don’t think I ever successfully completed anything! It was just faffing around. I didn’t really get anywhere with it.But then presumably you did get somewhere with it at some point.At some point. The PC emerged as the dominant platform, and I learnt a bit of Visual Basic. I didn’t really do much, just a couple of quick hacky things. A bit of demo animation. Took me a long time to get anywhere with programming, really.When did you feel like you did start to get somewhere?I think it was when I started doing things for someone else, which was my sister’s final year of university project. She called up my dad two days before she was due to submit, saying “We need something to display a graph!”. Dad says, “I’m too busy, go talk to your brother”. So I hacked up this ugly piece of code, sent it off and they won a prize for that project. Apparently, the graph, the bit that I wrote, was the reason they won a prize! That was when I first felt that I’d actually done something that was worthwhile. That was my first real bit of code, and the ugliest code I’ve ever written. It’s basically an array of pre-drawn line elements that I shifted round the screen to draw a very spikey graph.When did you decide that programming might actually be something that you wanted to do as a career?It’s not really a decision I took, I always wanted to do something with computers. And I had to take a gap year for uni, so I was looking for twelve month internships. I applied to Red Gate, and they gave me a job as a tester. And that’s where I really started having to write code well. To a better standard that I had been up to that point.How did you find coming to Red Gate and working with other coders?I thought it was really nice. I learnt so much just from other people around. I think one of the things that’s really great is that people are just willing to help you learn. Instead of “Don’t you know that, you’re so stupid”, it’s “You can just do it this way”.If you could go back to the very start of that internship, is there something that you would tell yourself?Write shorter code. I have a tendency to write massive, many-thousand line files that I break out of right at the end. And then half-way through a project I’m doing something, I think “Where did I write that bit that does that thing?”, and it’s almost impossible to find. I wrote some horrendous code when I started. Just that principle, just keep things short. Even if looks a bit crazy to be jumping around all over the place all of the time, it’s actually a lot more understandable.And how do you hold yourself to that?Generally, if a function’s going off my screen, it’s probably too long. That’s what I tell myself, and within the team here we have code reviews, so the guys I’m with at the moment are pretty good at pulling me up on, “Doesn’t that look like it’s getting a bit long?”. It’s more just the subjective standard of readability than anything.So you’re an advocate of code review?Yes, definitely. Both to spot errors that you might have made, and to improve your knowledge. The person you’re reviewing will say “Oh, you could have done it that way”. That’s how we learn, by talking to others, and also just sharing knowledge of how your project works around the team, or even outside the team. Definitely a very firm advocate of code reviews.Do you think there’s more we could do with them?I don’t know. We’re struggling with how to add them as part of the process without it becoming too cumbersome. We’ve experimented with a few different ways, and we’ve not found anything that just works.To get more into the nitty gritty: how do you like to debug code?The first thing is to do it in my head. I’ll actually think what piece of code is likely to have caused that error, and take a quick look at it, just to see if there’s anything glaringly obvious there. The next thing I’ll probably do is throw in print statements, or throw some exceptions from various points, just to check: is it going through the code path I expect it to? A last resort is to actually debug code using a debugger.Why is the debugger the last resort?Probably because of the environments I learnt programming in. VB and early BASIC didn’t have much of a debugger, the only way to find out what your program was doing was to add print statements. Also, because a lot of the stuff I tend to work with is non-interactive, if it’s something that takes a long time to run, I can throw in the print statements, set a run off, go and do something else, and look at it again later, rather than trying to remember what happened at that point when I was debugging through it. So it also gives me the record of what happens. I hate just sitting there pressing F5, F5, continually. If you’re having to find out what your code is doing at each line, you’ve probably got a very wrong mental model of what your code’s doing, and you can find that out just as easily by inspecting a couple of values through the print statements.If I were on some codebase that you were also working on, what should I do to make it as easy as possible to understand?I’d say short and well-named methods. The one thing I like to do when I’m looking at code is to find out where a value comes from, and the more layers of indirection there are, particularly DI [dependency injection] frameworks, the harder it is to find out where something’s come from. I really hate that. I want to know if the value come from the user here or is a constant here, and if I can’t find that out, that makes code very hard to understand for me.As a tester, where do you think the split should lie between software engineers and testers?I think the split is less on areas of the code you write and more what you’re designing and creating. The developers put a structure on the code, while my major role is to say which tests we should have, whether we should test that, or it’s not worth testing that because it’s a tiny function in code that nobody’s ever actually going to see. So it’s not a split in the code, it’s a split in what you’re thinking about. Saying what code we should write, but alternatively what code we should take out.In your experience, do the software engineers tend to do much testing themselves?They tend to control the lowest layer of tests. And, depending on how the balance of people is in the team, they might write some of the higher levels of test. Or that might go to the testers. I’m the only tester on my team with three other developers, so they’ll be writing quite a lot of the actual test code, with input from me as to whether we should test that functionality, whereas on other teams, where it’s been more equal numbers, the testers have written pretty much all of the high level tests, just because that’s the best use of resource.If you could shuffle resources around however you liked, do you think that the developers should be writing those high-level tests?I think they should be writing them occasionally. It helps when they have an understanding of how testing code works and possibly what assumptions we’ve made in tests, and they can say “actually, it doesn’t work like that under the hood so you’ve missed this whole area”. It’s one of those agile things that everyone on the team should be at least comfortable doing the various jobs. So if the developers can write test code then I think that’s a very good thing.So you think testers should be able to write production code?Yes, although given most testers skills at coding, I wouldn’t advise it too much! I have written a few things, and I did make a few changes that have actually gone into our production code base. They’re not necessarily running every time but they are there. I think having that mix of skill sets is really useful. In some ways we’re using our own product to test itself, so being able to make those changes where it’s not working saves me a round-trip through the developers. It can be really annoying if the developers have no time to make a change, and I can’t touch the code.If the software engineers are consistently writing tests at all levels, what role do you think the role of a tester is?I think on a team like that, those distinctions aren’t quite so useful. There’ll be two cases. There’s either the case where the developers think they’ve written good tests, but you still need someone with a test engineer mind-set to go through the tests and validate that it’s a useful set, or the correct set for that code. Or they won’t actually be pure developers, they’ll have that mix of test ability in there.I think having slightly more distinct roles is useful. When it starts to blur, then you lose that view of the tests as a whole. The tester job is not to create tests, it’s to validate the quality of the product, and you don’t do that just by writing tests. There’s more things you’ve got to keep in your mind. And I think when you blur the roles, you start to lose that end of the tester.So because you’re working on those features, you lose that holistic view of the whole system?Yeah, and anyone who’s worked on the feature shouldn’t be testing it. You always need to have it tested it by someone who didn’t write it. Otherwise you’re a bit too close and you assume “yes, people will only use it that way”, but the tester will come along and go “how do people use this? How would our most idiotic user use this?”. I might not test that because it might be completely irrelevant. But it’s coming in and trying to have a different set of assumptions.Are you a believer that it should all be automated if possible?Not entirely. So an automated test is always better than a manual test for the long-term, but there’s still nothing that beats a human sitting in front of the application and thinking “What could I do at this point?”. The automated test is very good but they follow that strict path, and they never check anything off the path. The human tester will look at things that they weren’t expecting, whereas the automated test can only ever go “Is that value correct?” in many respects, and it won’t notice that on the other side of the screen you’re showing something completely wrong. And that value might have been checked independently, but you always find a few odd interactions when you’re going through something manually, and you always need to go through something manually to start with anyway, otherwise you won’t know where the important bits to write your automation are.When you’re doing that manual testing, do you think it’s important to do that across the entire product, or just the bits that you’ve touched recently?I think it’s important to do it mostly on the bits you’ve touched, but you can’t ignore the rest of the product. Unless you’re dealing with a very, very self-contained bit, you’re almost always encounter other bits of the product along the way. Most testers I know, even if they are looking at just one path, they’ll keep open and move around a bit anyway, just because they want to find something that’s broken. If we find that your path is right, we’ll go out and hunt something else.How do you think this fits into the idea of continuously deploying, so long as the tests pass?With deploying a website it’s a bit different because you can always pull it back. If you’re deploying an application to customers, when you’ve released it, it’s out there, you can’t pull it back. Someone’s going to keep it, no matter how hard you try there will be a few installations that stay around. So I’d always have at least a human element on that path. With websites, you could probably automate straight out, or at least straight out to an internal environment or a single server in a cloud of fifty that will serve some people. But I don’t think you should release to everyone just on automated tests passing.You’ve already mentioned using BASIC and C# — are there any other languages that you’ve used?I’ve used a few. That’s something that has changed more recently, I’ve become familiar with more languages. Before I started at Red Gate I learnt a bit of C. Then last year, I taught myself Python which I actually really enjoyed using. I’ve also come across another language called Vala, which is sort of a C#-like language. It’s basically a pre-processor for C, but it has very nice syntax. I think that’s currently my favourite language.Any particular reason for trying Vala?I have a completely Linux environment at home, and I’ve been looking for a nice language, and C# just doesn’t cut it because I won’t touch Mono. So, I was looking for something like C# but that was useable in an open source environment, and Vala’s what I found. C#’s got a few features that Vala doesn’t, and Vala’s got a few features where I think “It would be awesome if C# had that”.What are some of the features that it’s missing?Extension methods. And I think that’s the only one that really bugs me. I like to use them when I’m writing C# because it makes some things really easy, especially with libraries that you can’t touch the internals of. It doesn’t have method overloading, which is sometimes annoying.Where it does win over C#?Everything is non-nullable by default, you never have to check that something’s unexpectedly null.Also, Vala has code contracts. This is starting to come in C# 4, but the way it works in Vala is that you specify requirements in short phrases as part of your function signature and they stick to the signature, so that when you inherit it, it has exactly the same code contract as the base one, or when you inherit from an interface, you have to match the signature exactly. Just using those makes you think a bit more about how you’re writing your method, it’s not an afterthought when you’ve got contracts from base classes given to you, you can’t change it. Which I think is a lot nicer than the way C# handles it. When are those actually checked?They’re checked both at compile and run-time. The compile-time checking isn’t very strong yet, it’s quite a new feature in the compiler, and because it compiles down to C, you can write C code and interface with your methods, so you can bypass that compile-time check anyway. So there’s an extra runtime check, and if you violate one of the contracts at runtime, it’s game over for your program, there’s no exception to catch, it’s just goodbye!One thing I dislike about C# is the exceptions. You write a bit of code and fifty exceptions could come from any point in your ten lines, and you can’t mentally model how those exceptions are going to come out, and you can’t even predict them based on the functions you’re calling, because if you’ve accidentally got a derived class there instead of a base class, that can throw a completely different set of exceptions. So I’ve got no way of mentally modelling those, whereas in Vala they’re checked like Java, so you know only these exceptions can come out. You know in advance the error conditions.I think Raymond Chen on Old New Thing says “the only thing you know when you throw an exception is that you’re in an invalid state somewhere in your program, so just kill it and be done with it!”You said you’ve also learnt bits of Python. How did you find that compared to Vala and C#?Very different because of the dynamic typing. I’ve been writing a website for my own use. I’m quite into photography, so I take photos off my camera, post-process them, dump them in a file, and I get a webpage with all my thumbnails. So sort of like Picassa, but written by myself because I wanted something to learn Python with. There are some things that are really nice, I just found it really difficult to cope with the fact that I’m not quite sure what this object type that I’m passed is, I might not ever be sure, so it can randomly blow up on me. But once I train myself to ignore that and just say “well, I’m fairly sure it’s going to be something that looks like this, so I’ll use it like this”, then it’s quite nice.Any particular features that you’ve appreciated?I don’t like any particular feature, it’s just very straightforward to work with. It’s very quick to write something in, particularly as you don’t have to worry that you’ve changed something that affects a different part of the program. If you have, then that part blows up, but I can get this part working right now.If you were doing a big project, would you be willing to do it in Python rather than C# or Vala?I think I might be willing to try something bigger or long term with Python. We’re currently doing an ASP.NET MVC project on C#, and I don’t like the amount of reflection. There’s a lot of magic that pulls values out, and it’s all done under the scenes. It’s almost managed to put a dynamic type system on top of C#, which in many ways destroys the language to me, whereas if you’re already in a dynamic language, having things done dynamically is much more natural. In many ways, you get the worst of both worlds. I think for web projects, I would go with Python again, whereas for anything desktop, command-line or GUI-based, I’d probably go for C# or Vala, depending on what environment I’m in.It’s the fact that you can gain from the strong typing in ways that you can’t so much on the web app. Or, in a web app, you have to use dynamic typing at some point, or you have to write a hell of a lot of boilerplate, and I’d rather use the dynamic typing than write the boilerplate.What do you think separates great programmers from everyone else?Probably design choices. Choosing to write it a piece of code one way or another. For any given program you ask me to write, I could probably do it five thousand ways. A programmer who is capable will see four or five of them, and choose one of the better ones. The excellent programmer will see the largest proportion and manage to pick the best one very quickly without having to think too much about it. I think that’s probably what separates, is the speed at which they can see what’s the best path to write the program in. More Red Gater Coder interviews

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Upload File to Windows Azure Blob in Chunks through ASP.NET MVC, JavaScript and HTML5

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/07/01/upload-file-to-windows-azure-blob-in-chunks-through-asp.net.aspxMany people are using Windows Azure Blob Storage to store their data in the cloud. Blob storage provides 99.9% availability with easy-to-use API through .NET SDK and HTTP REST. For example, we can store JavaScript files, images, documents in blob storage when we are building an ASP.NET web application on a Web Role in Windows Azure. Or we can store our VHD files in blob and mount it as a hard drive in our cloud service. If you are familiar with Windows Azure, you should know that there are two kinds of blob: page blob and block blob. The page blob is optimized for random read and write, which is very useful when you need to store VHD files. The block blob is optimized for sequential/chunk read and write, which has more common usage. Since we can upload block blob in blocks through BlockBlob.PutBlock, and them commit them as a whole blob with invoking the BlockBlob.PutBlockList, it is very powerful to upload large files, as we can upload blocks in parallel, and provide pause-resume feature. There are many documents, articles and blog posts described on how to upload a block blob. Most of them are focus on the server side, which means when you had received a big file, stream or binaries, how to upload them into blob storage in blocks through .NET SDK.  But the problem is, how can we upload these large files from client side, for example, a browser. This questioned to me when I was working with a Chinese customer to help them build a network disk production on top of azure. The end users upload their files from the web portal, and then the files will be stored in blob storage from the Web Role. My goal is to find the best way to transform the file from client (end user’s machine) to the server (Web Role) through browser. In this post I will demonstrate and describe what I had done, to upload large file in chunks with high speed, and save them as blocks into Windows Azure Blob Storage.   Traditional Upload, Works with Limitation The simplest way to implement this requirement is to create a web page with a form that contains a file input element and a submit button. 1: @using (Html.BeginForm("About", "Index", FormMethod.Post, new { enctype = "multipart/form-data" })) 2: { 3: <input type="file" name="file" /> 4: <input type="submit" value="upload" /> 5: } And then in the backend controller, we retrieve the whole content of this file and upload it in to the blob storage through .NET SDK. We can split the file in blocks and upload them in parallel and commit. The code had been well blogged in the community. 1: [HttpPost] 2: public ActionResult About(HttpPostedFileBase file) 3: { 4: var container = _client.GetContainerReference("test"); 5: container.CreateIfNotExists(); 6: var blob = container.GetBlockBlobReference(file.FileName); 7: var blockDataList = new Dictionary<string, byte[]>(); 8: using (var stream = file.InputStream) 9: { 10: var blockSizeInKB = 1024; 11: var offset = 0; 12: var index = 0; 13: while (offset < stream.Length) 14: { 15: var readLength = Math.Min(1024 * blockSizeInKB, (int)stream.Length - offset); 16: var blockData = new byte[readLength]; 17: offset += stream.Read(blockData, 0, readLength); 18: blockDataList.Add(Convert.ToBase64String(BitConverter.GetBytes(index)), blockData); 19:  20: index++; 21: } 22: } 23:  24: Parallel.ForEach(blockDataList, (bi) => 25: { 26: blob.PutBlock(bi.Key, new MemoryStream(bi.Value), null); 27: }); 28: blob.PutBlockList(blockDataList.Select(b => b.Key).ToArray()); 29:  30: return RedirectToAction("About"); 31: } This works perfect if we selected an image, a music or a small video to upload. But if I selected a large file, let’s say a 6GB HD-movie, after upload for about few minutes the page will be shown as below and the upload will be terminated. In ASP.NET there is a limitation of request length and the maximized request length is defined in the web.config file. It’s a number which less than about 4GB. So if we want to upload a really big file, we cannot simply implement in this way. Also, in Windows Azure, a cloud service network load balancer will terminate the connection if exceed the timeout period. From my test the timeout looks like 2 - 3 minutes. Hence, when we need to upload a large file we cannot just use the basic HTML elements. Besides the limitation mentioned above, the simple HTML file upload cannot provide rich upload experience such as chunk upload, pause and pause-resume. So we need to find a better way to upload large file from the client to the server.   Upload in Chunks through HTML5 and JavaScript In order to break those limitation mentioned above we will try to upload the large file in chunks. This takes some benefit to us such as - No request size limitation: Since we upload in chunks, we can define the request size for each chunks regardless how big the entire file is. - No timeout problem: The size of chunks are controlled by us, which means we should be able to make sure request for each chunk upload will not exceed the timeout period of both ASP.NET and Windows Azure load balancer. It was a big challenge to upload big file in chunks until we have HTML5. There are some new features and improvements introduced in HTML5 and we will use them to implement our solution.   In HTML5, the File interface had been improved with a new method called “slice”. It can be used to read part of the file by specifying the start byte index and the end byte index. For example if the entire file was 1024 bytes, file.slice(512, 768) will read the part of this file from the 512nd byte to 768th byte, and return a new object of interface called "Blob”, which you can treat as an array of bytes. In fact,  a Blob object represents a file-like object of immutable, raw data. The File interface is based on Blob, inheriting blob functionality and expanding it to support files on the user's system. For more information about the Blob please refer here. File and Blob is very useful to implement the chunk upload. We will use File interface to represent the file the user selected from the browser and then use File.slice to read the file in chunks in the size we wanted. For example, if we wanted to upload a 10MB file with 512KB chunks, then we can read it in 512KB blobs by using File.slice in a loop.   Assuming we have a web page as below. User can select a file, an input box to specify the block size in KB and a button to start upload. 1: <div> 2: <input type="file" id="upload_files" name="files[]" /><br /> 3: Block Size: <input type="number" id="block_size" value="512" name="block_size" />KB<br /> 4: <input type="button" id="upload_button_blob" name="upload" value="upload (blob)" /> 5: </div> Then we can have the JavaScript function to upload the file in chunks when user clicked the button. 1: <script type="text/javascript"> 1: 2: $(function () { 3: $("#upload_button_blob").click(function () { 4: }); 5: });</script> Firstly we need to ensure the client browser supports the interfaces we are going to use. Just try to invoke the File, Blob and FormData from the “window” object. If any of them is “undefined” the condition result will be “false” which means your browser doesn’t support these premium feature and it’s time for you to get your browser updated. FormData is another new feature we are going to use in the future. It could generate a temporary form for us. We will use this interface to create a form with chunk and associated metadata when invoked the service through ajax. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: if (window.File && window.Blob && window.FormData) { 4: alert("Your brwoser is awesome, let's rock!"); 5: } 6: else { 7: alert("Oh man plz update to a modern browser before try is cool stuff out."); 8: return; 9: } 10: }); Each browser supports these interfaces by their own implementation and currently the Blob, File and File.slice are supported by Chrome 21, FireFox 13, IE 10, Opera 12 and Safari 5.1 or higher. After that we worked on the files the user selected one by one since in HTML5, user can select multiple files in one file input box. 1: var files = $("#upload_files")[0].files; 2: for (var i = 0; i < files.length; i++) { 3: var file = files[i]; 4: var fileSize = file.size; 5: var fileName = file.name; 6: } Next, we calculated the start index and end index for each chunks based on the size the user specified from the browser. We put them into an array with the file name and the index, which will be used when we upload chunks into Windows Azure Blob Storage as blocks since we need to specify the target blob name and the block index. At the same time we will store the list of all indexes into another variant which will be used to commit blocks into blob in Azure Storage once all chunks had been uploaded successfully. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10:  11: // calculate the start and end byte index for each blocks(chunks) 12: // with the index, file name and index list for future using 13: var blockSizeInKB = $("#block_size").val(); 14: var blockSize = blockSizeInKB * 1024; 15: var blocks = []; 16: var offset = 0; 17: var index = 0; 18: var list = ""; 19: while (offset < fileSize) { 20: var start = offset; 21: var end = Math.min(offset + blockSize, fileSize); 22:  23: blocks.push({ 24: name: fileName, 25: index: index, 26: start: start, 27: end: end 28: }); 29: list += index + ","; 30:  31: offset = end; 32: index++; 33: } 34: } 35: }); Now we have all chunks’ information ready. The next step should be upload them one by one to the server side, and at the server side when received a chunk it will upload as a block into Blob Storage, and finally commit them with the index list through BlockBlobClient.PutBlockList. But since all these invokes are ajax calling, which means not synchronized call. So we need to introduce a new JavaScript library to help us coordinate the asynchronize operation, which named “async.js”. You can download this JavaScript library here, and you can find the document here. I will not explain this library too much in this post. We will put all procedures we want to execute as a function array, and pass into the proper function defined in async.js to let it help us to control the execution sequence, in series or in parallel. Hence we will define an array and put the function for chunk upload into this array. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4:  5: // start to upload each files in chunks 6: var files = $("#upload_files")[0].files; 7: for (var i = 0; i < files.length; i++) { 8: var file = files[i]; 9: var fileSize = file.size; 10: var fileName = file.name; 11: // calculate the start and end byte index for each blocks(chunks) 12: // with the index, file name and index list for future using 13: ... ... 14:  15: // define the function array and push all chunk upload operation into this array 16: blocks.forEach(function (block) { 17: putBlocks.push(function (callback) { 18: }); 19: }); 20: } 21: }); 22: }); As you can see, I used File.slice method to read each chunks based on the start and end byte index we calculated previously, and constructed a temporary HTML form with the file name, chunk index and chunk data through another new feature in HTML5 named FormData. Then post this form to the backend server through jQuery.ajax. This is the key part of our solution. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: blocks.forEach(function (block) { 15: putBlocks.push(function (callback) { 16: // load blob based on the start and end index for each chunks 17: var blob = file.slice(block.start, block.end); 18: // put the file name, index and blob into a temporary from 19: var fd = new FormData(); 20: fd.append("name", block.name); 21: fd.append("index", block.index); 22: fd.append("file", blob); 23: // post the form to backend service (asp.net mvc controller action) 24: $.ajax({ 25: url: "/Home/UploadInFormData", 26: data: fd, 27: processData: false, 28: contentType: "multipart/form-data", 29: type: "POST", 30: success: function (result) { 31: if (!result.success) { 32: alert(result.error); 33: } 34: callback(null, block.index); 35: } 36: }); 37: }); 38: }); 39: } 40: }); Then we will invoke these functions one by one by using the async.js. And once all functions had been executed successfully I invoked another ajax call to the backend service to commit all these chunks (blocks) as the blob in Windows Azure Storage. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.series(putBlocks, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: }); That’s all in the client side. The outline of our logic would be - Calculate the start and end byte index for each chunks based on the block size. - Defined the functions of reading the chunk form file and upload the content to the backend service through ajax. - Execute the functions defined in previous step with “async.js”. - Commit the chunks by invoking the backend service in Windows Azure Storage finally.   Save Chunks as Blocks into Blob Storage In above we finished the client size JavaScript code. It uploaded the file in chunks to the backend service which we are going to implement in this step. We will use ASP.NET MVC as our backend service, and it will receive the chunks, upload into Windows Azure Bob Storage in blocks, then finally commit as one blob. As in the client side we uploaded chunks by invoking the ajax call to the URL "/Home/UploadInFormData", I created a new action under the Index controller and it only accepts HTTP POST request. 1: [HttpPost] 2: public JsonResult UploadInFormData() 3: { 4: var error = string.Empty; 5: try 6: { 7: } 8: catch (Exception e) 9: { 10: error = e.ToString(); 11: } 12:  13: return new JsonResult() 14: { 15: Data = new 16: { 17: success = string.IsNullOrWhiteSpace(error), 18: error = error 19: } 20: }; 21: } Then I retrieved the file name, index and the chunk content from the Request.Form object, which was passed from our client side. And then, used the Windows Azure SDK to create a blob container (in this case we will use the container named “test”.) and create a blob reference with the blob name (same as the file name). Then uploaded the chunk as a block of this blob with the index, since in Blob Storage each block must have an index (ID) associated with so that finally we can put all blocks as one blob by specifying their block ID list. 1: [HttpPost] 2: public JsonResult UploadInFormData() 3: { 4: var error = string.Empty; 5: try 6: { 7: var name = Request.Form["name"]; 8: var index = int.Parse(Request.Form["index"]); 9: var file = Request.Files[0]; 10: var id = Convert.ToBase64String(BitConverter.GetBytes(index)); 11:  12: var container = _client.GetContainerReference("test"); 13: container.CreateIfNotExists(); 14: var blob = container.GetBlockBlobReference(name); 15: blob.PutBlock(id, file.InputStream, null); 16: } 17: catch (Exception e) 18: { 19: error = e.ToString(); 20: } 21:  22: return new JsonResult() 23: { 24: Data = new 25: { 26: success = string.IsNullOrWhiteSpace(error), 27: error = error 28: } 29: }; 30: } Next, I created another action to commit the blocks into blob once all chunks had been uploaded. Similarly, I retrieved the blob name from the Request.Form. I also retrieved the chunks ID list, which is the block ID list from the Request.Form in a string format, split them as a list, then invoked the BlockBlob.PutBlockList method. After that our blob will be shown in the container and ready to be download. 1: [HttpPost] 2: public JsonResult Commit() 3: { 4: var error = string.Empty; 5: try 6: { 7: var name = Request.Form["name"]; 8: var list = Request.Form["list"]; 9: var ids = list 10: .Split(',') 11: .Where(id => !string.IsNullOrWhiteSpace(id)) 12: .Select(id => Convert.ToBase64String(BitConverter.GetBytes(int.Parse(id)))) 13: .ToArray(); 14:  15: var container = _client.GetContainerReference("test"); 16: container.CreateIfNotExists(); 17: var blob = container.GetBlockBlobReference(name); 18: blob.PutBlockList(ids); 19: } 20: catch (Exception e) 21: { 22: error = e.ToString(); 23: } 24:  25: return new JsonResult() 26: { 27: Data = new 28: { 29: success = string.IsNullOrWhiteSpace(error), 30: error = error 31: } 32: }; 33: } Now we finished all code we need. The whole process of uploading would be like this below. Below is the full client side JavaScript code. 1: <script type="text/javascript" src="~/Scripts/async.js"></script> 2: <script type="text/javascript"> 3: $(function () { 4: $("#upload_button_blob").click(function () { 5: // assert the browser support html5 6: if (window.File && window.Blob && window.FormData) { 7: alert("Your brwoser is awesome, let's rock!"); 8: } 9: else { 10: alert("Oh man plz update to a modern browser before try is cool stuff out."); 11: return; 12: } 13:  14: // start to upload each files in chunks 15: var files = $("#upload_files")[0].files; 16: for (var i = 0; i < files.length; i++) { 17: var file = files[i]; 18: var fileSize = file.size; 19: var fileName = file.name; 20:  21: // calculate the start and end byte index for each blocks(chunks) 22: // with the index, file name and index list for future using 23: var blockSizeInKB = $("#block_size").val(); 24: var blockSize = blockSizeInKB * 1024; 25: var blocks = []; 26: var offset = 0; 27: var index = 0; 28: var list = ""; 29: while (offset < fileSize) { 30: var start = offset; 31: var end = Math.min(offset + blockSize, fileSize); 32:  33: blocks.push({ 34: name: fileName, 35: index: index, 36: start: start, 37: end: end 38: }); 39: list += index + ","; 40:  41: offset = end; 42: index++; 43: } 44:  45: // define the function array and push all chunk upload operation into this array 46: var putBlocks = []; 47: blocks.forEach(function (block) { 48: putBlocks.push(function (callback) { 49: // load blob based on the start and end index for each chunks 50: var blob = file.slice(block.start, block.end); 51: // put the file name, index and blob into a temporary from 52: var fd = new FormData(); 53: fd.append("name", block.name); 54: fd.append("index", block.index); 55: fd.append("file", blob); 56: // post the form to backend service (asp.net mvc controller action) 57: $.ajax({ 58: url: "/Home/UploadInFormData", 59: data: fd, 60: processData: false, 61: contentType: "multipart/form-data", 62: type: "POST", 63: success: function (result) { 64: if (!result.success) { 65: alert(result.error); 66: } 67: callback(null, block.index); 68: } 69: }); 70: }); 71: }); 72:  73: // invoke the functions one by one 74: // then invoke the commit ajax call to put blocks into blob in azure storage 75: async.series(putBlocks, function (error, result) { 76: var data = { 77: name: fileName, 78: list: list 79: }; 80: $.post("/Home/Commit", data, function (result) { 81: if (!result.success) { 82: alert(result.error); 83: } 84: else { 85: alert("done!"); 86: } 87: }); 88: }); 89: } 90: }); 91: }); 92: </script> And below is the full ASP.NET MVC controller code. 1: public class HomeController : Controller 2: { 3: private CloudStorageAccount _account; 4: private CloudBlobClient _client; 5:  6: public HomeController() 7: : base() 8: { 9: _account = CloudStorageAccount.Parse(CloudConfigurationManager.GetSetting("DataConnectionString")); 10: _client = _account.CreateCloudBlobClient(); 11: } 12:  13: public ActionResult Index() 14: { 15: ViewBag.Message = "Modify this template to jump-start your ASP.NET MVC application."; 16:  17: return View(); 18: } 19:  20: [HttpPost] 21: public JsonResult UploadInFormData() 22: { 23: var error = string.Empty; 24: try 25: { 26: var name = Request.Form["name"]; 27: var index = int.Parse(Request.Form["index"]); 28: var file = Request.Files[0]; 29: var id = Convert.ToBase64String(BitConverter.GetBytes(index)); 30:  31: var container = _client.GetContainerReference("test"); 32: container.CreateIfNotExists(); 33: var blob = container.GetBlockBlobReference(name); 34: blob.PutBlock(id, file.InputStream, null); 35: } 36: catch (Exception e) 37: { 38: error = e.ToString(); 39: } 40:  41: return new JsonResult() 42: { 43: Data = new 44: { 45: success = string.IsNullOrWhiteSpace(error), 46: error = error 47: } 48: }; 49: } 50:  51: [HttpPost] 52: public JsonResult Commit() 53: { 54: var error = string.Empty; 55: try 56: { 57: var name = Request.Form["name"]; 58: var list = Request.Form["list"]; 59: var ids = list 60: .Split(',') 61: .Where(id => !string.IsNullOrWhiteSpace(id)) 62: .Select(id => Convert.ToBase64String(BitConverter.GetBytes(int.Parse(id)))) 63: .ToArray(); 64:  65: var container = _client.GetContainerReference("test"); 66: container.CreateIfNotExists(); 67: var blob = container.GetBlockBlobReference(name); 68: blob.PutBlockList(ids); 69: } 70: catch (Exception e) 71: { 72: error = e.ToString(); 73: } 74:  75: return new JsonResult() 76: { 77: Data = new 78: { 79: success = string.IsNullOrWhiteSpace(error), 80: error = error 81: } 82: }; 83: } 84: } And if we selected a file from the browser we will see our application will upload chunks in the size we specified to the server through ajax call in background, and then commit all chunks in one blob. Then we can find the blob in our Windows Azure Blob Storage.   Optimized by Parallel Upload In previous example we just uploaded our file in chunks. This solved the problem that ASP.NET MVC request content size limitation as well as the Windows Azure load balancer timeout. But it might introduce the performance problem since we uploaded chunks in sequence. In order to improve the upload performance we could modify our client side code a bit to make the upload operation invoked in parallel. The good news is that, “async.js” library provides the parallel execution function. If you remembered the code we invoke the service to upload chunks, it utilized “async.series” which means all functions will be executed in sequence. Now we will change this code to “async.parallel”. This will invoke all functions in parallel. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.parallel(putBlocks, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: }); In this way all chunks will be uploaded to the server side at the same time to maximize the bandwidth usage. This should work if the file was not very large and the chunk size was not very small. But for large file this might introduce another problem that too many ajax calls are sent to the server at the same time. So the best solution should be, upload the chunks in parallel with maximum concurrency limitation. The code below specified the concurrency limitation to 4, which means at the most only 4 ajax calls could be invoked at the same time. 1: $("#upload_button_blob").click(function () { 2: // assert the browser support html5 3: ... ... 4: // start to upload each files in chunks 5: var files = $("#upload_files")[0].files; 6: for (var i = 0; i < files.length; i++) { 7: var file = files[i]; 8: var fileSize = file.size; 9: var fileName = file.name; 10: // calculate the start and end byte index for each blocks(chunks) 11: // with the index, file name and index list for future using 12: ... ... 13: // define the function array and push all chunk upload operation into this array 14: ... ... 15: // invoke the functions one by one 16: // then invoke the commit ajax call to put blocks into blob in azure storage 17: async.parallelLimit(putBlocks, 4, function (error, result) { 18: var data = { 19: name: fileName, 20: list: list 21: }; 22: $.post("/Home/Commit", data, function (result) { 23: if (!result.success) { 24: alert(result.error); 25: } 26: else { 27: alert("done!"); 28: } 29: }); 30: }); 31: } 32: });   Summary In this post we discussed how to upload files in chunks to the backend service and then upload them into Windows Azure Blob Storage in blocks. We focused on the frontend side and leverage three new feature introduced in HTML 5 which are - File.slice: Read part of the file by specifying the start and end byte index. - Blob: File-like interface which contains the part of the file content. - FormData: Temporary form element that we can pass the chunk alone with some metadata to the backend service. Then we discussed the performance consideration of chunk uploading. Sequence upload cannot provide maximized upload speed, but the unlimited parallel upload might crash the browser and server if too many chunks. So we finally came up with the solution to upload chunks in parallel with the concurrency limitation. We also demonstrated how to utilize “async.js” JavaScript library to help us control the asynchronize call and the parallel limitation.   Regarding the chunk size and the parallel limitation value there is no “best” value. You need to test vary composition and find out the best one for your particular scenario. It depends on the local bandwidth, client machine cores and the server side (Windows Azure Cloud Service Virtual Machine) cores, memory and bandwidth. Below is one of my performance test result. The client machine was Windows 8 IE 10 with 4 cores. I was using Microsoft Cooperation Network. The web site was hosted on Windows Azure China North data center (in Beijing) with one small web role (1.7GB 1 core CPU, 1.75GB memory with 100Mbps bandwidth). The test cases were - Chunk size: 512KB, 1MB, 2MB, 4MB. - Upload Mode: Sequence, parallel (unlimited), parallel with limit (4 threads, 8 threads). - Chunk Format: base64 string, binaries. - Target file: 100MB. - Each case was tested 3 times. Below is the test result chart. Some thoughts, but not guidance or best practice: - Parallel gets better performance than series. - No significant performance improvement between parallel 4 threads and 8 threads. - Transform with binaries provides better performance than base64. - In all cases, chunk size in 1MB - 2MB gets better performance.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• value types in the vm

  - by john.rose

  value types in the vm p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times} p.p2 {margin: 0.0px 0.0px 14.0px 0.0px; font: 14.0px Times} p.p3 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times} p.p4 {margin: 0.0px 0.0px 15.0px 0.0px; font: 14.0px Times} p.p5 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Courier} p.p6 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Courier; min-height: 17.0px} p.p7 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times; min-height: 18.0px} p.p8 {margin: 0.0px 0.0px 0.0px 36.0px; text-indent: -36.0px; font: 14.0px Times; min-height: 18.0px} p.p9 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times; min-height: 18.0px} p.p10 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times; color: #000000} li.li1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times} li.li7 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times; min-height: 18.0px} span.s1 {font: 14.0px Courier} span.s2 {color: #000000} span.s3 {font: 14.0px Courier; color: #000000} ol.ol1 {list-style-type: decimal} Or, enduring values for a changing world. Introduction A value type is a data type which, generally speaking, is designed for being passed by value in and out of methods, and stored by value in data structures. The only value types which the Java language directly supports are the eight primitive types. Java indirectly and approximately supports value types, if they are implemented in terms of classes. For example, both Integer and String may be viewed as value types, especially if their usage is restricted to avoid operations appropriate to Object. In this note, we propose a definition of value types in terms of a design pattern for Java classes, accompanied by a set of usage restrictions. We also sketch the relation of such value types to tuple types (which are a JVM-level notion), and point out JVM optimizations that can apply to value types. This note is a thought experiment to extend the JVM’s performance model in support of value types. The demonstration has two phases.  Initially the extension can simply use design patterns, within the current bytecode architecture, and in today’s Java language. But if the performance model is to be realized in practice, it will probably require new JVM bytecode features, changes to the Java language, or both.  We will look at a few possibilities for these new features. An Axiom of Value In the context of the JVM, a value type is a data type equipped with construction, assignment, and equality operations, and a set of typed components, such that, whenever two variables of the value type produce equal corresponding values for their components, the values of the two variables cannot be distinguished by any JVM operation. Here are some corollaries: A value type is immutable, since otherwise a copy could be constructed and the original could be modified in one of its components, allowing the copies to be distinguished. Changing the component of a value type requires construction of a new value. The equals and hashCode operations are strictly component-wise. If a value type is represented by a JVM reference, that reference cannot be successfully synchronized on, and cannot be usefully compared for reference equality. A value type can be viewed in terms of what it doesn’t do. We can say that a value type omits all value-unsafe operations, which could violate the constraints on value types.  These operations, which are ordinarily allowed for Java object types, are pointer equality comparison (the acmp instruction), synchronization (the monitor instructions), all the wait and notify methods of class Object, and non-trivial finalize methods. The clone method is also value-unsafe, although for value types it could be treated as the identity function. Finally, and most importantly, any side effect on an object (however visible) also counts as an value-unsafe operation. A value type may have methods, but such methods must not change the components of the value. It is reasonable and useful to define methods like toString, equals, and hashCode on value types, and also methods which are specifically valuable to users of the value type. Representations of Value Value types have two natural representations in the JVM, unboxed and boxed. An unboxed value consists of the components, as simple variables. For example, the complex number x=(1+2i), in rectangular coordinate form, may be represented in unboxed form by the following pair of variables: /*Complex x = Complex.valueOf(1.0, 2.0):*/ double x_re = 1.0, x_im = 2.0; These variables might be locals, parameters, or fields. Their association as components of a single value is not defined to the JVM. Here is a sample computation which computes the norm of the difference between two complex numbers: double distance(/*Complex x:*/ double x_re, double x_im,         /*Complex y:*/ double y_re, double y_im) {     /*Complex z = x.minus(y):*/     double z_re = x_re - y_re, z_im = x_im - y_im;     /*return z.abs():*/     return Math.sqrt(z_re*z_re + z_im*z_im); } A boxed representation groups component values under a single object reference. The reference is to a ‘wrapper class’ that carries the component values in its fields. (A primitive type can naturally be equated with a trivial value type with just one component of that type. In that view, the wrapper class Integer can serve as a boxed representation of value type int.) The unboxed representation of complex numbers is practical for many uses, but it fails to cover several major use cases: return values, array elements, and generic APIs. The two components of a complex number cannot be directly returned from a Java function, since Java does not support multiple return values. The same story applies to array elements: Java has no ’array of structs’ feature. (Double-length arrays are a possible workaround for complex numbers, but not for value types with heterogeneous components.) By generic APIs I mean both those which use generic types, like Arrays.asList and those which have special case support for primitive types, like String.valueOf and PrintStream.println. Those APIs do not support unboxed values, and offer some problems to boxed values. Any ’real’ JVM type should have a story for returns, arrays, and API interoperability. The basic problem here is that value types fall between primitive types and object types. Value types are clearly more complex than primitive types, and object types are slightly too complicated. Objects are a little bit dangerous to use as value carriers, since object references can be compared for pointer equality, and can be synchronized on. Also, as many Java programmers have observed, there is often a performance cost to using wrapper objects, even on modern JVMs. Even so, wrapper classes are a good starting point for talking about value types. If there were a set of structural rules and restrictions which would prevent value-unsafe operations on value types, wrapper classes would provide a good notation for defining value types. This note attempts to define such rules and restrictions. Let’s Start Coding Now it is time to look at some real code. Here is a definition, written in Java, of a complex number value type. @ValueSafe public final class Complex implements java.io.Serializable {     // immutable component structure:     public final double re, im;     private Complex(double re, double im) {         this.re = re; this.im = im;     }     // interoperability methods:     public String toString() { return "Complex("+re+","+im+")"; }     public List<Double> asList() { return Arrays.asList(re, im); }     public boolean equals(Complex c) {         return re == c.re && im == c.im;     }     public boolean equals(@ValueSafe Object x) {         return x instanceof Complex && equals((Complex) x);     }     public int hashCode() {         return 31*Double.valueOf(re).hashCode()                 + Double.valueOf(im).hashCode();     }     // factory methods:     public static Complex valueOf(double re, double im) {         return new Complex(re, im);     }     public Complex changeRe(double re2) { return valueOf(re2, im); }     public Complex changeIm(double im2) { return valueOf(re, im2); }     public static Complex cast(@ValueSafe Object x) {         return x == null ? ZERO : (Complex) x;     }     // utility methods and constants:     public Complex plus(Complex c)  { return new Complex(re+c.re, im+c.im); }     public Complex minus(Complex c) { return new Complex(re-c.re, im-c.im); }     public double abs() { return Math.sqrt(re*re + im*im); }     public static final Complex PI = valueOf(Math.PI, 0.0);     public static final Complex ZERO = valueOf(0.0, 0.0); } This is not a minimal definition, because it includes some utility methods and other optional parts.  The essential elements are as follows: The class is marked as a value type with an annotation. The class is final, because it does not make sense to create subclasses of value types. The fields of the class are all non-private and final.  (I.e., the type is immutable and structurally transparent.) From the supertype Object, all public non-final methods are overridden. The constructor is private. Beyond these bare essentials, we can observe the following features in this example, which are likely to be typical of all value types: One or more factory methods are responsible for value creation, including a component-wise valueOf method. There are utility methods for complex arithmetic and instance creation, such as plus and changeIm. There are static utility constants, such as PI. The type is serializable, using the default mechanisms. There are methods for converting to and from dynamically typed references, such as asList and cast. The Rules In order to use value types properly, the programmer must avoid value-unsafe operations.  A helpful Java compiler should issue errors (or at least warnings) for code which provably applies value-unsafe operations, and should issue warnings for code which might be correct but does not provably avoid value-unsafe operations.  No such compilers exist today, but to simplify our account here, we will pretend that they do exist. A value-safe type is any class, interface, or type parameter marked with the @ValueSafe annotation, or any subtype of a value-safe type.  If a value-safe class is marked final, it is in fact a value type.  All other value-safe classes must be abstract.  The non-static fields of a value class must be non-public and final, and all its constructors must be private. Under the above rules, a standard interface could be helpful to define value types like Complex.  Here is an example: @ValueSafe public interface ValueType extends java.io.Serializable {     // All methods listed here must get redefined.     // Definitions must be value-safe, which means     // they may depend on component values only.     List<? extends Object> asList();     int hashCode();     boolean equals(@ValueSafe Object c);     String toString(); } //@ValueSafe inherited from supertype: public final class Complex implements ValueType { … The main advantage of such a conventional interface is that (unlike an annotation) it is reified in the runtime type system.  It could appear as an element type or parameter bound, for facilities which are designed to work on value types only.  More broadly, it might assist the JVM to perform dynamic enforcement of the rules for value types. Besides types, the annotation @ValueSafe can mark fields, parameters, local variables, and methods.  (This is redundant when the type is also value-safe, but may be useful when the type is Object or another supertype of a value type.)  Working forward from these annotations, an expression E is defined as value-safe if it satisfies one or more of the following: The type of E is a value-safe type. E names a field, parameter, or local variable whose declaration is marked @ValueSafe. E is a call to a method whose declaration is marked @ValueSafe. E is an assignment to a value-safe variable, field reference, or array reference. E is a cast to a value-safe type from a value-safe expression. E is a conditional expression E0 ? E1 : E2, and both E1 and E2 are value-safe. Assignments to value-safe expressions and initializations of value-safe names must take their values from value-safe expressions. A value-safe expression may not be the subject of a value-unsafe operation.  In particular, it cannot be synchronized on, nor can it be compared with the “==” operator, not even with a null or with another value-safe type. In a program where all of these rules are followed, no value-type value will be subject to a value-unsafe operation.  Thus, the prime axiom of value types will be satisfied, that no two value type will be distinguishable as long as their component values are equal. More Code To illustrate these rules, here are some usage examples for Complex: Complex pi = Complex.valueOf(Math.PI, 0); Complex zero = pi.changeRe(0);  //zero = pi; zero.re = 0; ValueType vtype = pi; @SuppressWarnings("value-unsafe")   Object obj = pi; @ValueSafe Object obj2 = pi; obj2 = new Object();  // ok List<Complex> clist = new ArrayList<Complex>(); clist.add(pi);  // (ok assuming List.add param is @ValueSafe) List<ValueType> vlist = new ArrayList<ValueType>(); vlist.add(pi);  // (ok) List<Object> olist = new ArrayList<Object>(); olist.add(pi);  // warning: "value-unsafe" boolean z = pi.equals(zero); boolean z1 = (pi == zero);  // error: reference comparison on value type boolean z2 = (pi == null);  // error: reference comparison on value type boolean z3 = (pi == obj2);  // error: reference comparison on value type synchronized (pi) { }  // error: synch of value, unpredictable result synchronized (obj2) { }  // unpredictable result Complex qq = pi; qq = null;  // possible NPE; warning: “null-unsafe" qq = (Complex) obj;  // warning: “null-unsafe" qq = Complex.cast(obj);  // OK @SuppressWarnings("null-unsafe")   Complex empty = null;  // possible NPE qq = empty;  // possible NPE (null pollution) The Payoffs It follows from this that either the JVM or the java compiler can replace boxed value-type values with unboxed ones, without affecting normal computations.  Fields and variables of value types can be split into their unboxed components.  Non-static methods on value types can be transformed into static methods which take the components as value parameters. Some common questions arise around this point in any discussion of value types. Why burden the programmer with all these extra rules?  Why not detect programs automagically and perform unboxing transparently?  The answer is that it is easy to break the rules accidently unless they are agreed to by the programmer and enforced.  Automatic unboxing optimizations are tantalizing but (so far) unreachable ideal.  In the current state of the art, it is possible exhibit benchmarks in which automatic unboxing provides the desired effects, but it is not possible to provide a JVM with a performance model that assures the programmer when unboxing will occur.  This is why I’m writing this note, to enlist help from, and provide assurances to, the programmer.  Basically, I’m shooting for a good set of user-supplied “pragmas” to frame the desired optimization. Again, the important thing is that the unboxing must be done reliably, or else programmers will have no reason to work with the extra complexity of the value-safety rules.  There must be a reasonably stable performance model, wherein using a value type has approximately the same performance characteristics as writing the unboxed components as separate Java variables. There are some rough corners to the present scheme.  Since Java fields and array elements are initialized to null, value-type computations which incorporate uninitialized variables can produce null pointer exceptions.  One workaround for this is to require such variables to be null-tested, and the result replaced with a suitable all-zero value of the value type.  That is what the “cast” method does above. Generically typed APIs like List<T> will continue to manipulate boxed values always, at least until we figure out how to do reification of generic type instances.  Use of such APIs will elicit warnings until their type parameters (and/or relevant members) are annotated or typed as value-safe.  Retrofitting List<T> is likely to expose flaws in the present scheme, which we will need to engineer around.  Here are a couple of first approaches: public interface java.util.List<@ValueSafe T> extends Collection<T> { … public interface java.util.List<T extends Object|ValueType> extends Collection<T> { … (The second approach would require disjunctive types, in which value-safety is “contagious” from the constituent types.) With more transformations, the return value types of methods can also be unboxed.  This may require significant bytecode-level transformations, and would work best in the presence of a bytecode representation for multiple value groups, which I have proposed elsewhere under the title “Tuples in the VM”. But for starters, the JVM can apply this transformation under the covers, to internally compiled methods.  This would give a way to express multiple return values and structured return values, which is a significant pain-point for Java programmers, especially those who work with low-level structure types favored by modern vector and graphics processors.  The lack of multiple return values has a strong distorting effect on many Java APIs. Even if the JVM fails to unbox a value, there is still potential benefit to the value type.  Clustered computing systems something have copy operations (serialization or something similar) which apply implicitly to command operands.  When copying JVM objects, it is extremely helpful to know when an object’s identity is important or not.  If an object reference is a copied operand, the system may have to create a proxy handle which points back to the original object, so that side effects are visible.  Proxies must be managed carefully, and this can be expensive.  On the other hand, value types are exactly those types which a JVM can “copy and forget” with no downside. Array types are crucial to bulk data interfaces.  (As data sizes and rates increase, bulk data becomes more important than scalar data, so arrays are definitely accompanying us into the future of computing.)  Value types are very helpful for adding structure to bulk data, so a successful value type mechanism will make it easier for us to express richer forms of bulk data. Unboxing arrays (i.e., arrays containing unboxed values) will provide better cache and memory density, and more direct data movement within clustered or heterogeneous computing systems.  They require the deepest transformations, relative to today’s JVM.  There is an impedance mismatch between value-type arrays and Java’s covariant array typing, so compromises will need to be struck with existing Java semantics.  It is probably worth the effort, since arrays of unboxed value types are inherently more memory-efficient than standard Java arrays, which rely on dependent pointer chains. It may be sufficient to extend the “value-safe” concept to array declarations, and allow low-level transformations to change value-safe array declarations from the standard boxed form into an unboxed tuple-based form.  Such value-safe arrays would not be convertible to Object[] arrays.  Certain connection points, such as Arrays.copyOf and System.arraycopy might need additional input/output combinations, to allow smooth conversion between arrays with boxed and unboxed elements. Alternatively, the correct solution may have to wait until we have enough reification of generic types, and enough operator overloading, to enable an overhaul of Java arrays. Implicit Method Definitions The example of class Complex above may be unattractively complex.  I believe most or all of the elements of the example class are required by the logic of value types. If this is true, a programmer who writes a value type will have to write lots of error-prone boilerplate code.  On the other hand, I think nearly all of the code (except for the domain-specific parts like plus and minus) can be implicitly generated. Java has a rule for implicitly defining a class’s constructor, if no it defines no constructors explicitly.  Likewise, there are rules for providing default access modifiers for interface members.  Because of the highly regular structure of value types, it might be reasonable to perform similar implicit transformations on value types.  Here’s an example of a “highly implicit” definition of a complex number type: public class Complex implements ValueType {  // implicitly final     public double re, im;  // implicitly public final     //implicit methods are defined elementwise from te fields:     //  toString, asList, equals(2), hashCode, valueOf, cast     //optionally, explicit methods (plus, abs, etc.) would go here } In other words, with the right defaults, a simple value type definition can be a one-liner.  The observant reader will have noticed the similarities (and suitable differences) between the explicit methods above and the corresponding methods for List<T>. Another way to abbreviate such a class would be to make an annotation the primary trigger of the functionality, and to add the interface(s) implicitly: public @ValueType class Complex { … // implicitly final, implements ValueType (But to me it seems better to communicate the “magic” via an interface, even if it is rooted in an annotation.) Implicitly Defined Value Types So far we have been working with nominal value types, which is to say that the sequence of typed components is associated with a name and additional methods that convey the intention of the programmer.  A simple ordered pair of floating point numbers can be variously interpreted as (to name a few possibilities) a rectangular or polar complex number or Cartesian point.  The name and the methods convey the intended meaning. But what if we need a truly simple ordered pair of floating point numbers, without any further conceptual baggage?  Perhaps we are writing a method (like “divideAndRemainder”) which naturally returns a pair of numbers instead of a single number.  Wrapping the pair of numbers in a nominal type (like “QuotientAndRemainder”) makes as little sense as wrapping a single return value in a nominal type (like “Quotient”).  What we need here are structural value types commonly known as tuples. For the present discussion, let us assign a conventional, JVM-friendly name to tuples, roughly as follows: public class java.lang.tuple.$DD extends java.lang.tuple.Tuple {      double $1, $2; } Here the component names are fixed and all the required methods are defined implicitly.  The supertype is an abstract class which has suitable shared declarations.  The name itself mentions a JVM-style method parameter descriptor, which may be “cracked” to determine the number and types of the component fields. The odd thing about such a tuple type (and structural types in general) is it must be instantiated lazily, in response to linkage requests from one or more classes that need it.  The JVM and/or its class loaders must be prepared to spin a tuple type on demand, given a simple name reference, $xyz, where the xyz is cracked into a series of component types.  (Specifics of naming and name mangling need some tasteful engineering.) Tuples also seem to demand, even more than nominal types, some support from the language.  (This is probably because notations for non-nominal types work best as combinations of punctuation and type names, rather than named constructors like Function3 or Tuple2.)  At a minimum, languages with tuples usually (I think) have some sort of simple bracket notation for creating tuples, and a corresponding pattern-matching syntax (or “destructuring bind”) for taking tuples apart, at least when they are parameter lists.  Designing such a syntax is no simple thing, because it ought to play well with nominal value types, and also with pre-existing Java features, such as method parameter lists, implicit conversions, generic types, and reflection.  That is a task for another day. Other Use Cases Besides complex numbers and simple tuples there are many use cases for value types.  Many tuple-like types have natural value-type representations. These include rational numbers, point locations and pixel colors, and various kinds of dates and addresses. Other types have a variable-length ‘tail’ of internal values. The most common example of this is String, which is (mathematically) a sequence of UTF-16 character values. Similarly, bit vectors, multiple-precision numbers, and polynomials are composed of sequences of values. Such types include, in their representation, a reference to a variable-sized data structure (often an array) which (somehow) represents the sequence of values. The value type may also include ’header’ information. Variable-sized values often have a length distribution which favors short lengths. In that case, the design of the value type can make the first few values in the sequence be direct ’header’ fields of the value type. In the common case where the header is enough to represent the whole value, the tail can be a shared null value, or even just a null reference. Note that the tail need not be an immutable object, as long as the header type encapsulates it well enough. This is the case with String, where the tail is a mutable (but never mutated) character array. Field types and their order must be a globally visible part of the API.  The structure of the value type must be transparent enough to have a globally consistent unboxed representation, so that all callers and callees agree about the type and order of components  that appear as parameters, return types, and array elements.  This is a trade-off between efficiency and encapsulation, which is forced on us when we remove an indirection enjoyed by boxed representations.  A JVM-only transformation would not care about such visibility, but a bytecode transformation would need to take care that (say) the components of complex numbers would not get swapped after a redefinition of Complex and a partial recompile.  Perhaps constant pool references to value types need to declare the field order as assumed by each API user. This brings up the delicate status of private fields in a value type.  It must always be possible to load, store, and copy value types as coordinated groups, and the JVM performs those movements by moving individual scalar values between locals and stack.  If a component field is not public, what is to prevent hostile code from plucking it out of the tuple using a rogue aload or astore instruction?  Nothing but the verifier, so we may need to give it more smarts, so that it treats value types as inseparable groups of stack slots or locals (something like long or double). My initial thought was to make the fields always public, which would make the security problem moot.  But public is not always the right answer; consider the case of String, where the underlying mutable character array must be encapsulated to prevent security holes.  I believe we can win back both sides of the tradeoff, by training the verifier never to split up the components in an unboxed value.  Just as the verifier encapsulates the two halves of a 64-bit primitive, it can encapsulate the the header and body of an unboxed String, so that no code other than that of class String itself can take apart the values. Similar to String, we could build an efficient multi-precision decimal type along these lines: public final class DecimalValue extends ValueType {     protected final long header;     protected private final BigInteger digits;     public DecimalValue valueOf(int value, int scale) {         assert(scale >= 0);         return new DecimalValue(((long)value << 32) + scale, null);     }     public DecimalValue valueOf(long value, int scale) {         if (value == (int) value)             return valueOf((int)value, scale);         return new DecimalValue(-scale, new BigInteger(value));     } } Values of this type would be passed between methods as two machine words. Small values (those with a significand which fits into 32 bits) would be represented without any heap data at all, unless the DecimalValue itself were boxed. (Note the tension between encapsulation and unboxing in this case.  It would be better if the header and digits fields were private, but depending on where the unboxing information must “leak”, it is probably safer to make a public revelation of the internal structure.) Note that, although an array of Complex can be faked with a double-length array of double, there is no easy way to fake an array of unboxed DecimalValues.  (Either an array of boxed values or a transposed pair of homogeneous arrays would be reasonable fallbacks, in a current JVM.)  Getting the full benefit of unboxing and arrays will require some new JVM magic. Although the JVM emphasizes portability, system dependent code will benefit from using machine-level types larger than 64 bits.  For example, the back end of a linear algebra package might benefit from value types like Float4 which map to stock vector types.  This is probably only worthwhile if the unboxing arrays can be packed with such values. More Daydreams A more finely-divided design for dynamic enforcement of value safety could feature separate marker interfaces for each invariant.  An empty marker interface Unsynchronizable could cause suitable exceptions for monitor instructions on objects in marked classes.  More radically, a Interchangeable marker interface could cause JVM primitives that are sensitive to object identity to raise exceptions; the strangest result would be that the acmp instruction would have to be specified as raising an exception. @ValueSafe public interface ValueType extends java.io.Serializable,         Unsynchronizable, Interchangeable { … public class Complex implements ValueType {     // inherits Serializable, Unsynchronizable, Interchangeable, @ValueSafe     … It seems possible that Integer and the other wrapper types could be retro-fitted as value-safe types.  This is a major change, since wrapper objects would be unsynchronizable and their references interchangeable.  It is likely that code which violates value-safety for wrapper types exists but is uncommon.  It is less plausible to retro-fit String, since the prominent operation String.intern is often used with value-unsafe code. We should also reconsider the distinction between boxed and unboxed values in code.  The design presented above obscures that distinction.  As another thought experiment, we could imagine making a first class distinction in the type system between boxed and unboxed representations.  Since only primitive types are named with a lower-case initial letter, we could define that the capitalized version of a value type name always refers to the boxed representation, while the initial lower-case variant always refers to boxed.  For example: complex pi = complex.valueOf(Math.PI, 0); Complex boxPi = pi;  // convert to boxed myList.add(boxPi); complex z = myList.get(0);  // unbox Such a convention could perhaps absorb the current difference between int and Integer, double and Double. It might also allow the programmer to express a helpful distinction among array types. As said above, array types are crucial to bulk data interfaces, but are limited in the JVM.  Extending arrays beyond the present limitations is worth thinking about; for example, the Maxine JVM implementation has a hybrid object/array type.  Something like this which can also accommodate value type components seems worthwhile.  On the other hand, does it make sense for value types to contain short arrays?  And why should random-access arrays be the end of our design process, when bulk data is often sequentially accessed, and it might make sense to have heterogeneous streams of data as the natural “jumbo” data structure.  These considerations must wait for another day and another note. More Work It seems to me that a good sequence for introducing such value types would be as follows: Add the value-safety restrictions to an experimental version of javac. Code some sample applications with value types, including Complex and DecimalValue. Create an experimental JVM which internally unboxes value types but does not require new bytecodes to do so.  Ensure the feasibility of the performance model for the sample applications. Add tuple-like bytecodes (with or without generic type reification) to a major revision of the JVM, and teach the Java compiler to switch in the new bytecodes without code changes. A staggered roll-out like this would decouple language changes from bytecode changes, which is always a convenient thing. A similar investigation should be applied (concurrently) to array types.  In this case, it seems to me that the starting point is in the JVM: Add an experimental unboxing array data structure to a production JVM, perhaps along the lines of Maxine hybrids.  No bytecode or language support is required at first; everything can be done with encapsulated unsafe operations and/or method handles. Create an experimental JVM which internally unboxes value types but does not require new bytecodes to do so.  Ensure the feasibility of the performance model for the sample applications. Add tuple-like bytecodes (with or without generic type reification) to a major revision of the JVM, and teach the Java compiler to switch in the new bytecodes without code changes. That’s enough musing me for now.  Back to work!

  Read the article

• Glassfish 3 Cant update JDK no way

  - by Parhs

  Hello.. I was using 1.6.0_19 jdk and installed 1.6.0_20 jdk.. Glassfish doesnt like that... Here are my windows environment variables.. ALLUSERSPROFILE=C:\ProgramData ANT_HOME=C:\apache-ant-1.8.1\ APPDATA=C:\Users\Parhs\AppData\Roaming CommonProgramFiles=C:\Program Files\Common Files COMPUTERNAME=PARHS-PC ComSpec=C:\Windows\system32\cmd.exe FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Users\Parhs JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\ LOCALAPPDATA=C:\Users\Parhs\AppData\Local LOGONSERVER=\\PARHS-PC NUMBER_OF_PROCESSORS=2 OS=Windows_NT Path=C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb em;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetoot h Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apa che-ant-1.8.1\bin PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC PHPRC=C:\Program Files\PHP\php.ini PROCESSOR_ARCHITECTURE=x86 PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 8, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=0e08 ProgramData=C:\ProgramData ProgramFiles=C:\Program Files PROMPT=$P$G PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\ PUBLIC=C:\Users\Public SESSIONNAME=Console SystemDrive=C: SystemRoot=C:\Windows TEMP=C:\Users\Parhs\AppData\Local\Temp TMP=C:\Users\Parhs\AppData\Local\Temp USERDOMAIN=Parhs-PC USERNAME=Parhs USERPROFILE=C:\Users\Parhs VS90COMNTOOLS=C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\ windir=C:\Windows Also here is my asenv.bat REM DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. REM REM Copyright 2004-2009 Sun Microsystems, Inc. All rights reserved. REM REM Use is subject to License Terms REM set AS_IMQ_LIB=....\mq\lib set AS_IMQ_BIN=....\mq\bin set AS_CONFIG=..\config set AS_INSTALL=.. set AS_DEF_DOMAINS_PATH=..\domains set AS_DERBY_INSTALL=....\javadb set AS_JAVA="C:\Program Files\Java\jdk1.6.0_20" And although restarting system and server i am getting this report Operating System Information: Name of the Operating System: Windows 7 Binary Architecture name of the Operating System: x86, Version: 6.1 Number of processors available on the Operating System: 2 System load on the available processors for the last minute: -1.0. (Sum of running and queued runnable entities per minute) General Java Runtime Environment Information for the VM: 6152@Parhs-PC JRE BootClassPath: C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar JRE ClassPath: C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar JRE Native Library Path: C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin JRE name: Java HotSpot(TM) Client VM Vendor: Sun Microsystems Inc. Version: 16.2-b04 List of System Properties for the Java Virtual Machine: ANTLR_USE_DIRECT_CLASS_LOADING = true AS_CONFIG = C:\glassfishv3\glassfish\config\..\config AS_DEF_DOMAINS_PATH = C:\glassfishv3\glassfish\config\..\domains AS_DERBY_INSTALL = C:\glassfishv3\glassfish\config\..\..\javadb AS_IMQ_BIN = C:\glassfishv3\glassfish\config\..\..\mq\bin AS_IMQ_LIB = C:\glassfishv3\glassfish\config\..\..\mq\lib AS_INSTALL = C:\glassfishv3\glassfish\config\.. AS_JAVA = C:\Program Files\Java\jdk1.6.0_20\jre GlassFish_Platform = Felix awt.toolkit = sun.awt.windows.WToolkit catalina.base = C:\glassfishv3\glassfish\domains\domain1 catalina.home = C:\glassfishv3\glassfish\domains\domain1 catalina.useNaming = false com.sun.aas.configRoot = C:\glassfishv3\glassfish\config com.sun.aas.derbyRoot = C:\glassfishv3\javadb com.sun.aas.domainsRoot = C:\glassfishv3\glassfish\domains com.sun.aas.hostName = Parhs-PC com.sun.aas.imqBin = C:\glassfishv3\mq\bin com.sun.aas.imqLib = C:\glassfishv3\mq\lib com.sun.aas.installRoot = C:\glassfishv3\glassfish com.sun.aas.installRootURI = file:/C:/glassfishv3/glassfish/ com.sun.aas.instanceName = server com.sun.aas.instanceRoot = C:\glassfishv3\glassfish\domains\domain1 com.sun.aas.instanceRootURI = file:/C:/glassfishv3/glassfish/domains/domain1/ com.sun.aas.javaRoot = C:\Program Files\Java\jdk1.6.0_19\jre com.sun.enterprise.config.config_environment_factory_class = com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory com.sun.enterprise.hk2.cacheDir = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix com.sun.enterprise.jaccprovider.property.repository = C:\glassfishv3\glassfish\domains\domain1/generated/policy com.sun.enterprise.security.httpsOutboundKeyAlias = s1as common.loader = ${catalina.home}/common/classes,${catalina.home}/common/endorsed/*.jar,${catalina.home}/common/lib/*.jar eclipselink.security.usedoprivileged = true ejb.home = C:\glassfishv3\glassfish\modules\ejb felix.config.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/config.properties felix.fileinstall.bundles.new.start = true felix.fileinstall.debug = 1 felix.fileinstall.dir = C:\glassfishv3\glassfish/modules/autostart/ felix.fileinstall.poll = 5000 felix.system.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/system.properties file.encoding = Cp1253 file.encoding.pkg = sun.io file.separator = \ glassfish.version = GlassFish v3 (build 74.2) hk2.startup.context.args = #Mon Jun 07 20:27:37 EEST 2010 -startup-classpath=C\:\\glassfishv3\\glassfish\\modules\\glassfish.jar;C\:\\glassfishv3\\glassfish\\lib\\monitor\\btrace-agent.jar __time_zero=1275931657334 hk2.startup.context.mainModule=org.glassfish.core.kernel -startup-args=--domain,,,domain1,,,--domaindir,,,C\:\\glassfishv3\\glassfish\\domains\\domain1 --domain=domain1 -startup-classname=com.sun.enterprise.glassfish.bootstrap.ASMain --domaindir=C\:\\glassfishv3\\glassfish\\domains\\domain1 hk2.startup.context.root = C:\glassfishv3\glassfish\modules http.nonProxyHosts = localhost|127.0.0.1|Parhs-PC java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment java.awt.printerjob = sun.awt.windows.WPrinterJob java.class.path = C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar java.class.version = 50.0 java.endorsed.dirs = C:\glassfishv3\glassfish/modules/endorsed;C:\glassfishv3\glassfish/lib/endorsed java.ext.dirs = C:\Program Files\Java\jdk1.6.0_19\jre/lib/ext;C:\Program Files\Java\jdk1.6.0_19\jre/jre/lib/ext;C:\glassfishv3\glassfish\domains\domain1/lib/ext java.home = C:\Program Files\Java\jdk1.6.0_19\jre java.io.tmpdir = C:\Users\Parhs\AppData\Local\Temp\ java.library.path = C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin java.net.useSystemProxies = true java.rmi.server.randomIDs = true java.runtime.name = Java(TM) SE Runtime Environment java.runtime.version = 1.6.0_19-b04 java.security.auth.login.config = C:\glassfishv3\glassfish\domains\domain1/config/login.conf java.security.policy = C:\glassfishv3\glassfish\domains\domain1/config/server.policy java.specification.name = Java Platform API Specification java.specification.vendor = Sun Microsystems Inc. java.specification.version = 1.6 java.util.logging.config.file = C:\glassfishv3\glassfish\domains\domain1\config\logging.properties java.vendor = Sun Microsystems Inc. java.vendor.url = http://java.sun.com/ java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi java.version = 1.6.0_19 java.vm.info = mixed mode java.vm.name = Java HotSpot(TM) Client VM java.vm.specification.name = Java Virtual Machine Specification java.vm.specification.vendor = Sun Microsystems Inc. java.vm.specification.version = 1.0 java.vm.vendor = Sun Microsystems Inc. java.vm.version = 16.2-b04 javax.net.ssl.keyStore = C:\glassfishv3\glassfish\domains\domain1/config/keystore.jks javax.net.ssl.keyStorePassword = changeit javax.net.ssl.trustStore = C:\glassfishv3\glassfish\domains\domain1/config/cacerts.jks javax.net.ssl.trustStorePassword = changeit javax.rmi.CORBA.PortableRemoteObjectClass = com.sun.corba.ee.impl.javax.rmi.PortableRemoteObject javax.rmi.CORBA.StubClass = com.sun.corba.ee.impl.javax.rmi.CORBA.StubDelegateImpl javax.rmi.CORBA.UtilClass = com.sun.corba.ee.impl.javax.rmi.CORBA.Util javax.security.jacc.PolicyConfigurationFactory.provider = com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl jdbc.drivers = org.apache.derby.jdbc.ClientDriver jpa.home = C:\glassfishv3\glassfish\modules\jpa line.separator = org.glassfish.web.rfc2109_cookie_names_enforced = false org.jvnet.hk2.osgimain.autostartBundles = osgi-adapter.jar, org.apache.felix.shell.jar, org.apache.felix.shell.remote.jar, org.apache.felix.configadmin.jar, org.apache.felix.fileinstall.jar org.jvnet.hk2.osgimain.bundlesDir = C:\glassfishv3\glassfish\modules org.jvnet.hk2.osgimain.excludedSubDirs = autostart/ org.omg.CORBA.ORBClass = com.sun.corba.ee.impl.orb.ORBImpl org.omg.CORBA.ORBSingletonClass = com.sun.corba.ee.impl.orb.ORBSingleton org.osgi.framework.storage = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix os.arch = x86 os.name = Windows 7 os.version = 6.1 osgi.shell.telnet.ip = 127.0.0.1 osgi.shell.telnet.maxconn = 1 osgi.shell.telnet.port = 6666 package.access = package.definition = path.separator = ; security.home = C:\glassfishv3\glassfish\modules\security server.loader = ${catalina.home}/server/classes,${catalina.home}/server/lib/*.jar shared.loader = ${catalina.home}/shared/classes,${catalina.home}/shared/lib/*.jar sun.arch.data.model = 32 sun.boot.class.path = C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar sun.boot.library.path = C:\Program Files\Java\jdk1.6.0_19\jre\bin sun.cpu.endian = little sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86 sun.desktop = windows sun.io.unicode.encoding = UnicodeLittle sun.java.launcher = SUN_STANDARD sun.jnu.encoding = Cp1253 sun.management.compiler = HotSpot Client Compiler sun.os.patch.level = user.country = GR user.dir = C:\glassfishv3\glassfish\domains\domain1 user.home = C:\Users\Parhs user.language = el user.name = Parhs user.timezone = Europe/Athens user.variant = web.home = C:\glassfishv3\glassfish\modules\web weld.home = C:\glassfishv3\glassfish\modules\weld Why it is so damn hard??? What am i missing?

  Read the article

• How to capture live camera frames in RGB with DirectShow

  - by Jonny Boy

  I'm implementing live video capture through DirectShow for live processing and display. (Augmented Reality app). I can access the pixels easily enough, but it seems I can't get the SampleGrabber to provide RGB data. The device (an iSight -- running VC++ Express in VMWare) only reports MEDIASUBTYPE_YUY2. After extensive Googling, I still can't figure out whether DirectShow is supposed to provide built-in color space conversion for this sort of thing. Some sites report that there is no YUV<-RGB conversion built in, others report that you just have to call SetMediaType on your ISampleGrabber with an RGB subtype. Any advice is greatly appreciated, I'm going nuts on this one. Code provided below. Please note that The code works, except that it doesn't provide RGB data I'm aware that I can implement my own conversion filter, but this is not feasible because I'd have to anticipate every possible device format, and this is a relatively small project // Playback IGraphBuilder *pGraphBuilder = NULL; ICaptureGraphBuilder2 *pCaptureGraphBuilder2 = NULL; IMediaControl *pMediaControl = NULL; IBaseFilter *pDeviceFilter = NULL; IAMStreamConfig *pStreamConfig = NULL; BYTE *videoCaps = NULL; AM_MEDIA_TYPE **mediaTypeArray = NULL; // Device selection ICreateDevEnum *pCreateDevEnum = NULL; IEnumMoniker *pEnumMoniker = NULL; IMoniker *pMoniker = NULL; ULONG nFetched = 0; HRESULT hr = CoInitializeEx(NULL, COINIT_MULTITHREADED); // Create CreateDevEnum to list device hr = CoCreateInstance(CLSID_SystemDeviceEnum, NULL, CLSCTX_INPROC_SERVER, IID_ICreateDevEnum, (PVOID *)&pCreateDevEnum); if (FAILED(hr)) goto ReleaseDataAndFail; // Create EnumMoniker to list devices hr = pCreateDevEnum->CreateClassEnumerator(CLSID_VideoInputDeviceCategory, &pEnumMoniker, 0); if (FAILED(hr)) goto ReleaseDataAndFail; pEnumMoniker->Reset(); // Find desired device while (pEnumMoniker->Next(1, &pMoniker, &nFetched) == S_OK) { IPropertyBag *pPropertyBag; TCHAR devname[256]; // bind to IPropertyBag hr = pMoniker-&gt;BindToStorage(0, 0, IID_IPropertyBag, (void **)&amp;pPropertyBag); if (FAILED(hr)) { pMoniker-&gt;Release(); continue; } VARIANT varName; VariantInit(&amp;varName); HRESULT hr = pPropertyBag-&gt;Read(L"DevicePath", &amp;varName, 0); if (FAILED(hr)) { pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); continue; } char devicePath[DeviceInfo::STRING_LENGTH_MAX] = ""; wcstombs(devicePath, varName.bstrVal, DeviceInfo::STRING_LENGTH_MAX); if (strcmp(devicePath, deviceId) == 0) { // Bind Moniker to Filter pMoniker-&gt;BindToObject(0, 0, IID_IBaseFilter, (void**)&amp;pDeviceFilter); break; } pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); } if (pDeviceFilter == NULL) goto ReleaseDataAndFail; // Create sample grabber IBaseFilter *pGrabberF = NULL; hr = CoCreateInstance(CLSID_SampleGrabber, NULL, CLSCTX_INPROC_SERVER, IID_IBaseFilter, (void**)&pGrabberF); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabberF->QueryInterface(IID_ISampleGrabber, (void**)&pGrabber); if (FAILED(hr)) goto ReleaseDataAndFail; // Create FilterGraph hr = CoCreateInstance(CLSID_FilterGraph, NULL, CLSCTX_INPROC, IID_IGraphBuilder, (LPVOID *)&pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // create CaptureGraphBuilder2 hr = CoCreateInstance(CLSID_CaptureGraphBuilder2, NULL, CLSCTX_INPROC, IID_ICaptureGraphBuilder2, (LPVOID *)&pCaptureGraphBuilder2); if (FAILED(hr)) goto ReleaseDataAndFail; // set FilterGraph hr = pCaptureGraphBuilder2->SetFiltergraph(pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // get MediaControl interface hr = pGraphBuilder->QueryInterface(IID_IMediaControl, (LPVOID *)&pMediaControl); if (FAILED(hr)) goto ReleaseDataAndFail; // Add filters hr = pGraphBuilder->AddFilter(pDeviceFilter, L"Device Filter"); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGraphBuilder->AddFilter(pGrabberF, L"Sample Grabber"); if (FAILED(hr)) goto ReleaseDataAndFail; // Set sampe grabber options AM_MEDIA_TYPE mt; ZeroMemory(&mt, sizeof(AM_MEDIA_TYPE)); mt.majortype = MEDIATYPE_Video; mt.subtype = MEDIASUBTYPE_RGB32; hr = pGrabber->SetMediaType(&mt); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetOneShot(FALSE); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetBufferSamples(TRUE); if (FAILED(hr)) goto ReleaseDataAndFail; // Get stream config interface hr = pCaptureGraphBuilder2->FindInterface(NULL, &MEDIATYPE_Video, pDeviceFilter, IID_IAMStreamConfig, (void **)&pStreamConfig); if (FAILED(hr)) goto ReleaseDataAndFail; int streamCapsCount = 0, capsSize, bestFit = -1, bestFitPixelDiff = 1000000000, desiredPixelCount = _width * _height, bestFitWidth = 0, bestFitHeight = 0; float desiredAspectRatio = (float)_width / (float)_height; hr = pStreamConfig->GetNumberOfCapabilities(&streamCapsCount, &capsSize); if (FAILED(hr)) goto ReleaseDataAndFail; videoCaps = (BYTE *)malloc(capsSize * streamCapsCount); mediaTypeArray = (AM_MEDIA_TYPE **)malloc(sizeof(AM_MEDIA_TYPE *) * streamCapsCount); for (int i = 0; i < streamCapsCount; i++) { hr = pStreamConfig->GetStreamCaps(i, &mediaTypeArray[i], videoCaps + capsSize * i); if (FAILED(hr)) continue; VIDEO_STREAM_CONFIG_CAPS *currentVideoCaps = (VIDEO_STREAM_CONFIG_CAPS *)(videoCaps + capsSize * i); int closestWidth = MAX(currentVideoCaps-&gt;MinOutputSize.cx, MIN(currentVideoCaps-&gt;MaxOutputSize.cx, width)); int closestHeight = MAX(currentVideoCaps-&gt;MinOutputSize.cy, MIN(currentVideoCaps-&gt;MaxOutputSize.cy, height)); int pixelDiff = ABS(desiredPixelCount - closestWidth * closestHeight); if (pixelDiff &lt; bestFitPixelDiff &amp;&amp; ABS(desiredAspectRatio - (float)closestWidth / (float)closestHeight) &lt; 0.1f) { bestFit = i; bestFitPixelDiff = pixelDiff; bestFitWidth = closestWidth; bestFitHeight = closestHeight; } } if (bestFit == -1) goto ReleaseDataAndFail; AM_MEDIA_TYPE *mediaType; hr = pStreamConfig->GetFormat(&mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; VIDEOINFOHEADER *videoInfoHeader = (VIDEOINFOHEADER *)mediaType->pbFormat; videoInfoHeader->bmiHeader.biWidth = bestFitWidth; videoInfoHeader->bmiHeader.biHeight = bestFitHeight; //mediaType->subtype = MEDIASUBTYPE_RGB32; hr = pStreamConfig->SetFormat(mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; pStreamConfig->Release(); pStreamConfig = NULL; free(videoCaps); videoCaps = NULL; free(mediaTypeArray); mediaTypeArray = NULL; // Connect pins IPin *pDeviceOut = NULL, *pGrabberIn = NULL; if (FindPin(pDeviceFilter, PINDIR_OUTPUT, 0, &pDeviceOut) && FindPin(pGrabberF, PINDIR_INPUT, 0, &pGrabberIn)) { hr = pGraphBuilder->Connect(pDeviceOut, pGrabberIn); if (FAILED(hr)) goto ReleaseDataAndFail; } else { goto ReleaseDataAndFail; } // start playing hr = pMediaControl->Run(); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->GetConnectedMediaType(&mt); // Set dimensions width = bestFitWidth; height = bestFitHeight; _width = bestFitWidth; _height = bestFitHeight; // Allocate pixel buffer pPixelBuffer = (unsigned *)malloc(width * height * 4); // Release objects pGraphBuilder->Release(); pGraphBuilder = NULL; pEnumMoniker->Release(); pEnumMoniker = NULL; pCreateDevEnum->Release(); pCreateDevEnum = NULL; return true;

  Read the article

• Storage model for various user setting and attributes in database?

  - by dvd

  I'm currently trying to upgrade a user management system for one web application. This web application is used to provide remote access to various networking equipment for educational purposes. All equipment is assigned to various pods, which users can book for periods of time. The current system is very simple - just 2 user types: administrators and students. All their security and other attributes are mostly hardcoded. I want to change this to something like the following model: user <-- (1..n)profile <--- (1..n) attributes. I.e. user can be assigned several profiles and each profile can have multiple attributes. At runtime all profiles and attributes are merged into single active profile. Some examples of attributes i'm planning to implement: EXPIRATION_DATE - single value, value type: date, specifies when user account will expire; ACCESS_POD - single value, value type: ref to object of Pod class, specifies which pod the user is allowed to book, user profile can have multiple such attributes with different values; TIME_QUOTA - single value, value type: integer, specifies maximum length of time for which student can reserve equipment. CREDIT_CHARGING - multi valued, specifies how much credits will be assigned to user over period of time. (Reservation of devices will cost credits, which will regenerate over time); Security permissions and user preferences can end up as profile or user attributes too: i.e CAN_CREATE_USERS, CAN_POST_NEWS, CAN_EDIT_DEVICES, FONT_SIZE, etc.. This way i could have, for example: students of course A will have profiles STUDENT (with basic attributes) and PROFILE A (wich grants acces to pod A). Students of course B will have profiles: STUDENT, PROFILE B(wich grants to pod B and have increased time quotas). I'm using Spring and Hibernate frameworks for this application and MySQL for database. For this web application i would like to stay within boundaries of these tools. The problem is, that i can't figure out how to best represent all these attributes in database. I also want to create some kind of unified way of retrieveing these attributes and their values. Here is the model i've come up with. Base classes. public abstract class Attribute{ private Long id; Attribute() {} abstract public String getName(); public Long getId() {return id; } void setId(Long id) {this.id = id;} } public abstract class SimpleAttribute extends Attribute{ public abstract Serializable getValue(); abstract void setValue(Serializable s); @Override public boolean equals(Object obj) { ... } @Override public int hashCode() { ... } } Simple attributes can have only one value of any type (including object and enum). Here are more specific attributes: public abstract class IntAttribute extends SimpleAttribute { private Integer value; public Integer getValue() { return value; } void setValue(Integer value) { this.value = value;} void setValue(Serializable s) { setValue((Integer)s); } } public class MaxOrdersAttribute extends IntAttribute { public String getName() { return "Maximum outstanding orders"; } } public final class CreditRateAttribute extends IntAttribute { public String getName() { return "Credit Regeneration Rate"; } } All attributes stored stored using Hibenate variant "table per class hierarchy". Mapping: <class name="ru.mirea.rea.model.abac.Attribute" table="ATTRIBUTES" abstract="true" > <id name="id" column="id"> <generator class="increment" /> </id> <discriminator column="attributeType" type="string"/> <subclass name="ru.mirea.rea.model.abac.SimpleAttribute" abstract="true"> <subclass name="ru.mirea.rea.model.abac.IntAttribute" abstract="true" > <property name="value" column="intVal" type="integer"/> <subclass name="ru.mirea.rea.model.abac.CreditRateAttribute" discriminator-value="CreditRate" /> <subclass name="ru.mirea.rea.model.abac.MaxOrdersAttribute" discriminator-value="MaxOrders" /> </subclass> <subclass name="ru.mirea.rea.model.abac.DateAttribute" abstract="true" > <property name="value" column="dateVal" type="timestamp"/> <subclass name="ru.mirea.rea.model.abac.ExpirationDateAttribute" discriminator-value="ExpirationDate" /> </subclass> <subclass name="ru.mirea.rea.model.abac.PodAttribute" abstract="true" > <many-to-one name="value" column="podVal" class="ru.mirea.rea.model.pods.Pod"/> <subclass name="ru.mirea.rea.model.abac.PodAccessAttribute" discriminator-value="PodAccess" lazy="false"/> </subclass> <subclass name="ru.mirea.rea.model.abac.SecurityPermissionAttribute" discriminator-value="SecurityPermission" lazy="false"> <property name="value" column="spVal" type="ru.mirea.rea.db.hibernate.customTypes.SecurityPermissionType"/> </subclass> </subclass> </class> SecurityPermissionAttribute uses enumeration of various permissions as it's value. Several types of attributes imlement GrantedAuthority interface and can be used with Spring Security for authentication and authorization. Attributes can be created like this: public final class AttributeManager { public <T extends SimpleAttribute> T createSimpleAttribute(Class<T> c, Serializable value) { Session session = HibernateUtil.getCurrentSession(); T att = null; ... att = c.newInstance(); att.setValue(value); session.save(att); session.flush(); ... return att; } public <T extends SimpleAttribute> List<T> findSimpleAttributes(Class<T> c) { List<T> result = new ArrayList<T>(); Session session = HibernateUtil.getCurrentSession(); List<T> temp = session.createCriteria(c).list(); result.addAll(temp); return result; } } And retrieved through User Profiles to which they are assigned. I do not expect that there would be very large amount of rows in the ATTRIBUTES table, but are there any serious drawbacks of such design?

  Read the article

• What is the fastest cyclic synchronization in Java (ExecutorService vs. CyclicBarrier vs. X)?

  - by Alex Dunlop

  Which Java synchronization construct is likely to provide the best performance for a concurrent, iterative processing scenario with a fixed number of threads like the one outlined below? After experimenting on my own for a while (using ExecutorService and CyclicBarrier) and being somewhat surprised by the results, I would be grateful for some expert advice and maybe some new ideas. Existing questions here do not seem to focus primarily on performance, hence this new one. Thanks in advance! The core of the app is a simple iterative data processing algorithm, parallelized to the spread the computational load across 8 cores on a Mac Pro, running OS X 10.6 and Java 1.6.0_07. The data to be processed is split into 8 blocks and each block is fed to a Runnable to be executed by one of a fixed number of threads. Parallelizing the algorithm was fairly straightforward, and it functionally works as desired, but its performance is not yet what I think it could be. The app seems to spend a lot of time in system calls synchronizing, so after some profiling I wonder whether I selected the most appropriate synchronization mechanism(s). A key requirement of the algorithm is that it needs to proceed in stages, so the threads need to sync up at the end of each stage. The main thread prepares the work (very low overhead), passes it to the threads, lets them work on it, then proceeds when all threads are done, rearranges the work (again very low overhead) and repeats the cycle. The machine is dedicated to this task, Garbage Collection is minimized by using per-thread pools of pre-allocated items, and the number of threads can be fixed (no incoming requests or the like, just one thread per CPU core). V1 - ExecutorService My first implementation used an ExecutorService with 8 worker threads. The program creates 8 tasks holding the work and then lets them work on it, roughly like this: // create one thread per CPU executorService = Executors.newFixedThreadPool( 8 ); ... // now process data in cycles while( ...) { // package data into 8 work items ... // create one Callable task per work item ... // submit the Callables to the worker threads executorService.invokeAll( taskList ); } This works well functionally (it does what it should), and for very large work items indeed all 8 CPUs become highly loaded, as much as the processing algorithm would be expected to allow (some work items will finish faster than others, then idle). However, as the work items become smaller (and this is not really under the program's control), the user CPU load shrinks dramatically: blocksize | system | user | cycles/sec 256k 1.8% 85% 1.30 64k 2.5% 77% 5.6 16k 4% 64% 22.5 4096 8% 56% 86 1024 13% 38% 227 256 17% 19% 420 64 19% 17% 948 16 19% 13% 1626 Legend: - block size = size of the work item (= computational steps) - system = system load, as shown in OS X Activity Monitor (red bar) - user = user load, as shown in OS X Activity Monitor (green bar) - cycles/sec = iterations through the main while loop, more is better The primary area of concern here is the high percentage of time spent in the system, which appears to be driven by thread synchronization calls. As expected, for smaller work items, ExecutorService.invokeAll() will require relatively more effort to sync up the threads versus the amount of work being performed in each thread. But since ExecutorService is more generic than it would need to be for this use case (it can queue tasks for threads if there are more tasks than cores), I though maybe there would be a leaner synchronization construct. V2 - CyclicBarrier The next implementation used a CyclicBarrier to sync up the threads before receiving work and after completing it, roughly as follows: main() { // create the barrier barrier = new CyclicBarrier( 8 + 1 ); // create Runable for thread, tell it about the barrier Runnable task = new WorkerThreadRunnable( barrier ); // start the threads for( int i = 0; i < 8; i++ ) { // create one thread per core new Thread( task ).start(); } while( ... ) { // tell threads about the work ... // N threads + this will call await(), then system proceeds barrier.await(); // ... now worker threads work on the work... // wait for worker threads to finish barrier.await(); } } class WorkerThreadRunnable implements Runnable { CyclicBarrier barrier; WorkerThreadRunnable( CyclicBarrier barrier ) { this.barrier = barrier; } public void run() { while( true ) { // wait for work barrier.await(); // do the work ... // wait for everyone else to finish barrier.await(); } } } Again, this works well functionally (it does what it should), and for very large work items indeed all 8 CPUs become highly loaded, as before. However, as the work items become smaller, the load still shrinks dramatically: blocksize | system | user | cycles/sec 256k 1.9% 85% 1.30 64k 2.7% 78% 6.1 16k 5.5% 52% 25 4096 9% 29% 64 1024 11% 15% 117 256 12% 8% 169 64 12% 6.5% 285 16 12% 6% 377 For large work items, synchronization is negligible and the performance is identical to V1. But unexpectedly, the results of the (highly specialized) CyclicBarrier seem MUCH WORSE than those for the (generic) ExecutorService: throughput (cycles/sec) is only about 1/4th of V1. A preliminary conclusion would be that even though this seems to be the advertised ideal use case for CyclicBarrier, it performs much worse than the generic ExecutorService. V3 - Wait/Notify + CyclicBarrier It seemed worth a try to replace the first cyclic barrier await() with a simple wait/notify mechanism: main() { // create the barrier // create Runable for thread, tell it about the barrier // start the threads while( ... ) { // tell threads about the work // for each: workerThreadRunnable.setWorkItem( ... ); // ... now worker threads work on the work... // wait for worker threads to finish barrier.await(); } } class WorkerThreadRunnable implements Runnable { CyclicBarrier barrier; @NotNull volatile private Callable<Integer> workItem; WorkerThreadRunnable( CyclicBarrier barrier ) { this.barrier = barrier; this.workItem = NO_WORK; } final protected void setWorkItem( @NotNull final Callable<Integer> callable ) { synchronized( this ) { workItem = callable; notify(); } } public void run() { while( true ) { // wait for work while( true ) { synchronized( this ) { if( workItem != NO_WORK ) break; try { wait(); } catch( InterruptedException e ) { e.printStackTrace(); } } } // do the work ... // wait for everyone else to finish barrier.await(); } } } Again, this works well functionally (it does what it should). blocksize | system | user | cycles/sec 256k 1.9% 85% 1.30 64k 2.4% 80% 6.3 16k 4.6% 60% 30.1 4096 8.6% 41% 98.5 1024 12% 23% 202 256 14% 11.6% 299 64 14% 10.0% 518 16 14.8% 8.7% 679 The throughput for small work items is still much worse than that of the ExecutorService, but about 2x that of the CyclicBarrier. Eliminating one CyclicBarrier eliminates half of the gap. V4 - Busy wait instead of wait/notify Since this app is the primary one running on the system and the cores idle anyway if they're not busy with a work item, why not try a busy wait for work items in each thread, even if that spins the CPU needlessly. The worker thread code changes as follows: class WorkerThreadRunnable implements Runnable { // as before final protected void setWorkItem( @NotNull final Callable<Integer> callable ) { workItem = callable; } public void run() { while( true ) { // busy-wait for work while( true ) { if( workItem != NO_WORK ) break; } // do the work ... // wait for everyone else to finish barrier.await(); } } } Also works well functionally (it does what it should). blocksize | system | user | cycles/sec 256k 1.9% 85% 1.30 64k 2.2% 81% 6.3 16k 4.2% 62% 33 4096 7.5% 40% 107 1024 10.4% 23% 210 256 12.0% 12.0% 310 64 11.9% 10.2% 550 16 12.2% 8.6% 741 For small work items, this increases throughput by a further 10% over the CyclicBarrier + wait/notify variant, which is not insignificant. But it is still much lower-throughput than V1 with the ExecutorService. V5 - ? So what is the best synchronization mechanism for such a (presumably not uncommon) problem? I am weary of writing my own sync mechanism to completely replace ExecutorService (assuming that it is too generic and there has to be something that can still be taken out to make it more efficient). It is not my area of expertise and I'm concerned that I'd spend a lot of time debugging it (since I'm not even sure my wait/notify and busy wait variants are correct) for uncertain gain. Any advice would be greatly appreciated.

  Read the article

• urgent help needed to convert arabic html to pdf

  - by Mariam

  <div> <table border="1" width="500px"> <tr> <td colspan="2"> aspdotnetcodebook ????? ???????</td> </tr> <tr> <td> cell1 </td> <td> cell2 </td> </tr> <tr> <td colspan="2"> <asp:Label ID="lblLabel" runat="server" Text=""></asp:Label> <img alt="" src="logo.gif" style="width: 174px; height: 40px" /></td> </tr> <tr> <td colspan="2" dir="rtl"> <h1> <img alt="" height="168" src="http://a.cksource.com/c/1/inc/img/demo-little-red.jpg" style="margin-left: 10px; margin-right: 10px; float: left;" width="120" />????? ????? ??? ??? ?? ?? ??</h1> <p> &quot;<b>Little Red Riding Hood</b>&quot; is a famous <a href="http://en.wikipedia.org/wiki/Fairy_tale" title="Fairy tale">fairy tale</a> about a young girl&#39;s encounter with a wolf. The story has been changed considerably in its history and subject to numerous modern adaptations and readings.</p> <table align="right" border="1" cellpadding="1" cellspacing="1" style="width: 200px;"> <caption> <strong>International Names</strong></caption> <tr> <td> ????? ???????</td> <td> &nbsp;</td> </tr> <tr> <td> Italian</td> <td> <i>Cappuccetto Rosso</i></td> </tr> <tr> <td> Spanish</td> <td> <i>Caperucita Roja</i></td> </tr> </table> <p> The version most widely known today is based on the <a href="http://en.wikipedia.org/wiki/Brothers_Grimm" title="Brothers Grimm"> Brothers Grimm</a> variant. It is about a girl called Little Red Riding Hood, after the red <a href="http://en.wikipedia.org/wiki/Hood_(headgear%2529" title="Hood (headgear)">hooded</a> <a href="http://en.wikipedia.org/wiki/Cape" title="Cape">cape</a> or <a href="http://en.wikipedia.org/wiki/Cloak" title="Cloak">cloak</a> she wears. The girl walks through the woods to deliver food to her sick grandmother.</p> <p> A wolf wants to eat the girl but is afraid to do so in public. He approaches the girl, and she naïvely tells him where she is going. He suggests the girl pick some flowers, which she does. In the meantime, he goes to the grandmother&#39;s house and gains entry by pretending to be the girl. He swallows the grandmother whole, and waits for the girl, disguised as the grandmother.</p> <p> When the girl arrives, she notices he looks very strange to be her grandma. In most retellings, this eventually culminates with Little Red Riding Hood saying, &quot;My, what big teeth you have!&quot;<br /> To which the wolf replies, &quot;The better to eat you with,&quot; and swallows her whole, too.</p> <p> A <a href="http://en.wikipedia.org/wiki/Hunter" title="Hunter">hunter</a>, however, comes to the rescue and cuts the wolf open. Little Red Riding Hood and her grandmother emerge unharmed. They fill the wolf&#39;s body with heavy stones, which drown him when he falls into a well. Other versions of the story have had the grandmother shut in the closet instead of eaten, and some have Little Red Riding Hood saved by the hunter as the wolf advances on her rather than after she is eaten.</p> <p> The tale makes the clearest contrast between the safe world of the village and the dangers of the <a href="http://en.wikipedia.org/wiki/Enchanted_forest" title="Enchanted forest">forest</a>, conventional antitheses that are essentially medieval, though no written versions are as old as that.</p> </td> </tr> </table> </div> i use itextsharp to convert this content which is stored in DB to pdf file to be downloaded to the user i cant achieve this

  Read the article

• CSS layout problem on Firefox with filling space between end of left column and footer

  - by Jean

  Basically, the left column is supposed to extend to the footer with the continuous red color. However, in Firefox on pages with lots of text, the column does not extend to the footer and leaves a large white gap--see site: http://library.luhs.org/JHSII/about.html I've tried readjusting the heights, creating the sticky footer, and other things I've read about on this site. So I admit that I'm stumped, and what's really odd is that the layout seems to work in IE as there is no white space! I didn't create the site, but I recently inherited it and trying to work through the mess Any help is much appreciated, here's the CSS #html,body{ margin:0; padding:0; border:0; height:100%; } #body{ background:#ffffff; min-width:965px; text-align:center; width: 600px; font: Geneva, Arial, Helvetica, sans-serif; } #.style7{ clear:both; height:1px; overflow:hidden; line-height:1%; font-size:0px; margin-bottom:-1px; } #fullheightcontainer{ margin-left:auto; margin-right:auto; text-align:left; position:relative; width:965px; height:100%; } #wrapper{ min-height:100%; height:100%; background:#660000; background-color: #660000; background-repeat: repeat; } #wrapp\65 r{ height:auto; } # html wrapper{ height:100%; } #outer{ z-index:1; position:relative; margin-left:150px; width:815px; background:#FFFFFF; height:100%; background-color: #FFFFFF; } #left{ width:151px; float:left; display:inline; position:relative; margin-left:-150px; } padding: 20px; border: 0; margin: 0 0 0 240px *>html #left{width:150px;} #container-left{ width:150px; color: #CCCCCC; } * html #left{margin-right:-3px;} #center{ width:800px; float:right; display:inline; margin-left:-1px; } #clearheadercenter{ height:125px; overflow:hidden; } #clearfootercenter{ height:50px; overflow:hidden; } #footer{ z-index:1; position:relative; clear: both; width:965px; height:50px; overflow:hidden; margin-top:-50px; background-color: #660000; } #subfooter1{ background:#FFFFCC; text-align:left; margin-left:150px; height:50px; } #header{ z-index:1; position:absolute; top:0px; width:815px; margin-left:150px; height:100px; overflow:hidden; background-color: #660000; } #subheader1{ background:#FFFFCC; text-align:center; height:70px; } #gfx_bg_middle{ top:0px; position:absolute; height:100%; overflow:hidden; width:815px; margin-left:150px; background:#FFFFFF; } # html #gfx_bg_middle{ display:none; } #floatingnav { margin: 5px 10px 5px 5px; padding: 0px 5px 5px; float: right; font: .75em/1.35em Geneva, Arial, Helvetica, sans-serif; height: 600px; width: 300px; } #floatingnav a { color: #630; } #floatingnav ul { margin-top: -5; } #.floatright { float: right; margin: 0 0 10px 10px; border: 1px solid #666; padding: 2px; } #outer{ word-wrap:break-word; } #table.s1 { border-width: medium; border-spacing: 2px; border-style: none; border-color: rgb(85, 0, 0); border-collapse: collapse; background-color: white; } #table.s1 th { border-width: medium; padding: 2px; border-style: groove; border-color: red; background-color: white; -moz-border-radius: 0px 0px 0px 0px; } #table.s1 td { border-width: medium; padding: 2px; border-style: groove; border-color: #660000; background-color: #FFFFFF; -moz-border-radius: 0px 0px 0px 0px; } #a:link { color: #000066; } #a:visited { color: #000066; } #p.sample { font-family: serif; font-style: normal; font-variant: normal; font-weight: normal; font-size: medium; line-height: 100%; word-spacing: normal; letter-spacing: normal; text-decoration: none; text-transform: none; text-align: left; text-indent: 0ex; }

  Read the article

• What is correct HTTP status code when redirecting to a login page?

  - by PHP_Jedi

  When a user is not logged in and tries to access an page that requires login, what is the correct HTTP status code for a redirect to the login page? I don't feel that any of the 3xx fit that description. 10.3.1 300 Multiple Choices The requested resource corresponds to any one of a set of representations, each with its own specific location, and agent- driven negotiation information (section 12) is being provided so that the user (or user agent) can select a preferred representation and redirect its request to that location. Unless it was a HEAD request, the response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content- Type header field. Depending upon the format and the capabilities of the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection. If the server has a preferred choice of representation, it SHOULD include the specific URI for that representation in the Location field; user agents MAY use the Location field value for automatic redirection. This response is cacheable unless indicated otherwise. 10.3.2 301 Moved Permanently The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise. The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). If the 301 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. Note: When automatically redirecting a POST request after receiving a 301 status code, some existing HTTP/1.0 user agents will erroneously change it into a GET request. 10.3.3 302 Found The requested resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field. The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). If the 302 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. Note: RFC 1945 and RFC 2068 specify that the client is not allowed to change the method on the redirected request. However, most existing user agent implementations treat 302 as if it were a 303 response, performing a GET on the Location field-value regardless of the original request method. The status codes 303 and 307 have been added for servers that wish to make unambiguously clear which kind of reaction is expected of the client. 10.3.4 303 See Other The response to the request can be found under a different URI and SHOULD be retrieved using a GET method on that resource. This method exists primarily to allow the output of a POST-activated script to redirect the user agent to a selected resource. The new URI is not a substitute reference for the originally requested resource. The 303 response MUST NOT be cached, but the response to the second (redirected) request might be cacheable. The different URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s). Note: Many pre-HTTP/1.1 user agents do not understand the 303 status. When interoperability with such clients is a concern, the 302 status code may be used instead, since most user agents react to a 302 response as described here for 303. 10.3.5 304 Not Modified If the client has performed a conditional GET request and access is allowed, but the document has not been modified, the server SHOULD respond with this status code. The 304 response MUST NOT contain a message-body, and thus is always terminated by the first empty line after the header fields. The response MUST include the following header fields: - Date, unless its omission is required by section 14.18.1 If a clockless origin server obeys these rules, and proxies and clients add their own Date to any response received without one (as already specified by [RFC 2068], section 14.19), caches will operate correctly. - ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request - Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous response for the same variant If the conditional GET used a strong cache validator (see section 13.3.3), the response SHOULD NOT include other entity-headers. Otherwise (i.e., the conditional GET used a weak validator), the response MUST NOT include other entity-headers; this prevents inconsistencies between cached entity-bodies and updated headers. If a 304 response indicates an entity not currently cached, then the cache MUST disregard the response and repeat the request without the conditional. If a cache uses a received 304 response to update a cache entry, the cache MUST update the entry to reflect any new field values given in the response. 10.3.6 305 Use Proxy The requested resource MUST be accessed through the proxy given by the Location field. The Location field gives the URI of the proxy. The recipient is expected to repeat this single request via the proxy. 305 responses MUST only be generated by origin servers. Note: RFC 2068 was not clear that 305 was intended to redirect a single request, and to be generated by origin servers only. Not observing these limitations has significant security consequences. 10.3.7 306 (Unused) The 306 status code was used in a previous version of the specification, is no longer used, and the code is reserved. 10.3.8 307 Temporary Redirect The requested resource resides temporarily under a different URI. Since the redirection MAY be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field. The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s) , since many pre-HTTP/1.1 user agents do not understand the 307 status. Therefore, the note SHOULD contain the information necessary for a user to repeat the original request on the new URI. If the 307 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued. I'm using 302 for now, until I find THE correct answer.

  Read the article

< Previous Page | 17 18 19 20 21 22  | Next Page >