Search Results

Search found 15931 results on 638 pages for 'password storage'.

Page 210/638 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • What happens when the USB key or SD card I've installed VMware ESXi on fails?

    - by ewwhite
    An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

    Read the article

  • AWS Large Instance: /mnt does not show all the space that should be available

    - by Emile Baizel
    I just created a Large (m1.large) 64 bit instance which comes with 850 GB instance storage. Look at the Large Instance http://aws.amazon.com/ec2/instance-types/ A 'df -h' from the root folder gives me the output below. The /mnt is where I'm thinking the instance storage is but here it is only showing me 414G. I have set up two servers and both are showing the same numbers. root@ip-11-11-11-11:/# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.9G 1.1G 6.5G 14% / none 3.7G 112K 3.7G 1% /dev none 3.7G 0 3.7G 0% /dev/shm none 3.7G 48K 3.7G 1% /var/run none 3.7G 0 3.7G 0% /var/lock /dev/sdb 414G 199M 393G 1% /mnt

    Read the article

  • zk selecting combobox item programatically

    - by Abdul Khaliq
    Hi, I cannot set the value of combobox programatically can some one tell me what missing in the code public class Profile extends Window implements AfterCompose { @Override public void afterCompose() { Session session = Sessions.getCurrent(false); ApplicationContext ctx = WebApplicationContextUtils.getRequiredWebApplicationContext( (ServletContext) getDesktop().getWebApp().getNativeContext()); UsersDao usersDao = (UsersDao) ctx.getBean("daoUsers"); User user = (User) session.getAttribute("user"); user = usersDao.getUser(user.getUsername(),user.getPassword()); Textbox username_t = (Textbox) this.getFellow("username"); Textbox password_t = (Textbox) this.getFellow("password"); Textbox conpassword_t = (Textbox) this.getFellow("con_password"); Textbox firstname_t = (Textbox) this.getFellow("firstName"); Textbox lastname_t = (Textbox) this.getFellow("lastName"); Textbox email_t = (Textbox) this.getFellow("email"); Combobox hintQuestion_t = (Combobox) this.getFellow("hintQuestion"); Textbox hintAnswer_t = (Textbox) this.getFellow("hintAnswer"); Combobox locale_t = (Combobox) this.getFellow("locale"); Combobox authority_t = (Combobox) this.getFellow("authority"); username_t.setText(user.getUsername()); firstname_t.setText(user.getUserDetails().getFirstName()); lastname_t.setText(user.getUserDetails().getLastName()); email_t.setText(user.getUserDetails().getEmail()); Comboitem selectedItem = getSelectedIndexComboboxItem(hintQuestion_t, user.getHintQuestion()); hintQuestion_t.setSelectedItem(selectedItem); hintAnswer_t.setText(user.getHintAnswer()); selectedItem = getSelectedIndexComboboxItem(locale_t, user.getUserDetails().getLocale()); locale_t.setSelectedItem(selectedItem); selectedItem = getSelectedIndexComboboxItem(authority_t, ((Authority)user.getAuthorities().toArray()[0]).getRole()); authority_t.setSelectedItem(selectedItem); } private Comboitem getSelectedIndexComboboxItem(Combobox combobox, String value) { List<Comboitem> items = combobox.getItems(); Comboitem item = items.get(0); for (int i = 0; i < items.size(); i++) { Comboitem comboitem = items.get(i); String label = (String)comboitem.getLabel(); String cval = (String)comboitem.getValue(); if ((label!=null && label.equalsIgnoreCase(value)) || (cval != null && cval.equalsIgnoreCase(value))) { item = comboitem; break; } } return item; } } // zk file <window id="profile" use="com.jf.web.zk.ui.Profile"> <tabbox id="tabbox" width="40%" > <tabs> <tab label="Account Information"/> <tab label="Personal Information"/> <tab label="Contact Details"/> </tabs> <tabpanels> <tabpanel> <grid> <rows> <row> <label value="${i18nUtils.message('user.username')}"/> <hbox> <textbox id="username" />*,a-zA-Z,0-9 </hbox> </row> <row> <label value="${i18nUtils.message('user.password')}"/> <hbox> <textbox id="password" type="password"/>* </hbox> </row> <row> <label value="${i18nUtils.message('registration.user.password.confirm')}"/> <hbox> <textbox id="con_password" type="password"/>* </hbox> </row> <row> <label value="${i18nUtils.message('user.details.first.name')}"/> <hbox> <textbox id="firstName" type="text"/>* </hbox> </row> <row> <label value="${i18nUtils.message('user.details.last.name')}"/> <hbox> <textbox id="lastName" type="text"/>* </hbox> </row> <row> <label value="${i18nUtils.message('user.details.email')}"/> <hbox> <textbox id="email" type="text"/>* </hbox> </row> <row> <label value="${i18nUtils.message('user.hint.question')}"/> <hbox> <combobox id="hintQuestion" onCreate='self.setSelectedIndex(1);'> <comboitem label="${i18nUtils.message('user.hint.question.possible.value1')}" /> <comboitem label="${i18nUtils.message('user.hint.question.possible.value2')}" /> <comboitem label="${i18nUtils.message('user.hint.question.possible.value3')}" /> <comboitem label="${i18nUtils.message('user.hint.question.possible.value4')}" /> <comboitem label="${i18nUtils.message('user.hint.question.possible.value5')}" /> </combobox>* </hbox> </row> <row> <label value="${i18nUtils.message('user.hint.answer')}"/> <hbox> <textbox id="hintAnswer" type="text"/>* </hbox> </row> <row> <label value="${i18nUtils.message('user.details.locale')}"/> <hbox> <combobox id="locale" onCreate='self.setSelectedIndex(1);self.setReadonly(true);'> <comboitem label="${i18nUtils.message('user.details.locale.en')}" value="en_US"/> <comboitem label="${i18nUtils.message('user.details.locale.bg')}" value="bg_BG"/> </combobox>* </hbox> </row> <row> <label value="${i18nUtils.message('authority.account.type')}"/> <hbox> <combobox id="authority" onCreate='self.setSelectedIndex(0);self.setReadonly(true);'> <comboitem label="${i18nUtils.message('authority.job.seeker')}" value="Job Seeker"/> <comboitem label="${i18nUtils.message('authority.employer')}" value="Employer"/> <comboitem label="${i18nUtils.message('authority.hra')}" value="Human Resource Agency"/> <comboitem label="${i18nUtils.message('authority.advertiser')}" value="Advertiser"/> </combobox>* </hbox> </row> </rows> </grid> </tabpanel> </tabpanels> </tabbox> <grid width="40%"> <rows> <row> <button label="${i18nUtils.message('bttn.save')}" onClick="save()"/> <button label="${i18nUtils.message('bttn.cancel')}" onClick="cancel()"/> </row> </rows> </grid> </window> </zk> The "getSelectedIndexComboboxItem()" does return the correct selected item but there seems no effect on the UI. Like for example the locale is set to default Bulgarian language and I need to set it to English. Abdul Khaliq

    Read the article

  • Measuring accesses to files - apache

    - by George
    So, I run a website, that among other things serves some files (usually PDFs). All of these are stored under a specific directory on the server: /var/www/vhosts/mysite.com/httpdocs/site/pdf_files Due to storage issues on my VPS I am thinking of getting some S3 or other cloud storage, and mount it as a drive using S3QL/S3FS. Then I will be able to have the pdf_files folder symlinked to the cloud folder and serve those files using that, without any changes on the web app (is that a good plan?) Now, before doing that, to estimate costs, I need to measure how many file accesses people do, how many times those pdf files are downloaded each month for example. Basically how many times those pdf files are accessed through the webserver. I'd like to do it on the apache level. What's the best way that this can be done? e.g.: measuring the bandwidth used by files in that specific folder would also be nice, but estimating the GET requests I'll be doing to amazon is more important.

    Read the article

  • Backup strategy for Windows Server 2008 R2 and Hyper-V

    - by winserveradmin
    I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

    Read the article

  • .NET SSH Port Forwarding

    - by Ronnie Overby
    I am trying to build in SSH port forwarding into a .net application that I am writing. I have tried using sharpSSH, but it requires the user to input their password every time, and I don't want that. I am going to handle storing the password. I have downloaded Granados, but there is basically zero documentation for it. While I sift through the Granados source, does anyone know how to accomplish port forwarding with Granados or any other free SSH library for .NET?

    Read the article

  • .LazyInitializationException when adding to a list that is held within a entity class using hibernat

    - by molleman
    Right so i am working with hibernate gilead and gwt to persist my data on users and files of a website. my users have a list of file locations. i am using annotations to map my classes to the database. i am getting a org.hibernate.LazyInitializationException when i try to add file locations to the list that is held in the user class. this is a method below that is overridden from a external file upload servlet class that i am using. when the file uploads it calls this method. the user1 is loaded from the database elsewhere. the exception occurs at user1.getFileLocations().add(fileLocation); . i dont understand it really at all.! any help would be great. the stack trace of the error is below public String executeAction(HttpServletRequest request, List<FileItem> sessionFiles) throws UploadActionException { for (FileItem item : sessionFiles) { if (false == item.isFormField()) { try { YFUser user1 = (YFUser)getSession().getAttribute(SESSION_USER); // This is the location where a file will be stored String fileLocationString = "/Users/Stefano/Desktop/UploadedFiles/" + user1.getUsername(); File fl = new File(fileLocationString); fl.mkdir(); // so here i will create the a file container for my uploaded file File file = File.createTempFile("upload-", ".bin",fl); // this is where the file is written to disk item.write(file); // the FileLocation object is then created FileLocation fileLocation = new FileLocation(); fileLocation.setLocation(fileLocationString); //test System.out.println("file path = "+file.getPath()); user1.getFileLocations().add(fileLocation); //the line above is where the exception occurs } catch (Exception e) { throw new UploadActionException(e.getMessage()); } } removeSessionFileItems(request); } return null; } //This is the class file for a Your Files User @Entity @Table(name = "yf_user_table") public class YFUser implements Serializable,ILightEntity { @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "user_id",nullable = false) private int userId; @Column(name = "username") private String username; @Column(name = "password") private String password; @Column(name = "email") private String email; @ManyToMany(cascade = CascadeType.ALL) @JoinTable(name = "USER_FILELOCATION", joinColumns = { @JoinColumn(name = "user_id") }, inverseJoinColumns = { @JoinColumn(name = "locationId") }) private List<FileLocation> fileLocations = new ArrayList<FileLocation>() ; public YFUser(){ } public int getUserId() { return userId; } private void setUserId(int userId) { this.userId = userId; } public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } public String getPassword() { return password; } public void setPassword(String password) { this.password = password; } public String getEmail() { return email; } public void setEmail(String email) { this.email = email; } public List<FileLocation> getFileLocations() { if(fileLocations ==null){ fileLocations = new ArrayList<FileLocation>(); } return fileLocations; } public void setFileLocations(List<FileLocation> fileLocations) { this.fileLocations = fileLocations; } /* public void addFileLocation(FileLocation location){ fileLocations.add(location); }*/ @Override public void addProxyInformation(String property, Object proxyInfo) { // TODO Auto-generated method stub } @Override public String getDebugString() { // TODO Auto-generated method stub return null; } @Override public Object getProxyInformation(String property) { // TODO Auto-generated method stub return null; } @Override public boolean isInitialized(String property) { // TODO Auto-generated method stub return false; } @Override public void removeProxyInformation(String property) { // TODO Auto-generated method stub } @Override public void setInitialized(String property, boolean initialised) { // TODO Auto-generated method stub } @Override public Object getValue() { // TODO Auto-generated method stub return null; } } @Entity @Table(name = "fileLocationTable") public class FileLocation implements Serializable { @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "locationId", updatable = false, nullable = false) private int ieId; @Column (name = "location") private String location; /* private List uploadedUsers = new ArrayList(); */ public FileLocation(){ } public int getIeId() { return ieId; } private void setIeId(int ieId) { this.ieId = ieId; } public String getLocation() { return location; } public void setLocation(String location) { this.location = location; } /* public List getUploadedUsers() { return uploadedUsers; } public void setUploadedUsers(List<YFUser> uploadedUsers) { this.uploadedUsers = uploadedUsers; } public void addUploadedUser(YFUser user){ uploadedUsers.add(user); } */ } Apr 2, 2010 11:33:12 PM org.hibernate.LazyInitializationException <init> SEVERE: failed to lazily initialize a collection of role: com.example.client.YFUser.fileLocations, no session or session was closed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.example.client.YFUser.fileLocations, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:380) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:372) at org.hibernate.collection.AbstractPersistentCollection.initialize(AbstractPersistentCollection.java:365) at org.hibernate.collection.AbstractPersistentCollection.write(AbstractPersistentCollection.java:205) at org.hibernate.collection.PersistentBag.add(PersistentBag.java:297) at com.example.server.TestServiceImpl.saveFileLocation(TestServiceImpl.java:132) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at net.sf.gilead.gwt.PersistentRemoteService.processCall(PersistentRemoteService.java:174) at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost(RemoteServiceServlet.java:224) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:713) at javax.servlet.http.HttpServlet.service(HttpServlet.java:806) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle(RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:396) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488) Apr 2, 2010 11:33:12 PM net.sf.gilead.core.PersistentBeanManager clonePojo INFO: Third party instance, not cloned : org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.example.client.YFUser.fileLocations, no session or session was closed

    Read the article

  • Postgres cannot connect to server

    - by user1408935
    Super stumped by why Postgres isn't working on a new app I just started. I've got it working for one app already. I'm using postgres.app, and it's running. I started a new app with rails new depot -d postgresql and then I went into the database.yml file and changed username to my $USER (which is what it is for the other app, which is working). So now my database.yml file has this development section: development: adapter: postgresql encoding: unicode database: depot_development pool: 5 username: <username> password: But when I run "rake db:create" or "rake db:create:all" I still got this error (in full, cause I don't know what's relevant): Couldn't create database for {"adapter"=>"postgresql", "encoding"=>"unicode", "database"=>"depot_development", "pool"=>5, "username"=>"<username>", "password"=>nil} could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:1213:in `initialize' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:1213:in `new' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:1213:in `connect' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:329:in `initialize' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:28:in `new' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/postgresql_adapter.rb:28:in `postgresql_connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:309:in `new_connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:319:in `checkout_new_connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:241:in `block (2 levels) in checkout' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:236:in `loop' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:236:in `block in checkout' /Users/<username>/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/monitor.rb:211:in `mon_synchronize' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:233:in `checkout' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:96:in `block in connection' /Users/<username>/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/monitor.rb:211:in `mon_synchronize' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:95:in `connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_pool.rb:404:in `retrieve_connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_specification.rb:170:in `retrieve_connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/connection_adapters/abstract/connection_specification.rb:144:in `connection' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/railties/databases.rake:107:in `rescue in create_database' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/railties/databases.rake:51:in `create_database' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/railties/databases.rake:40:in `block (3 levels) in <top (required)>' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/railties/databases.rake:40:in `each' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.8/lib/active_record/railties/databases.rake:40:in `block (2 levels) in <top (required)>' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:205:in `call' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:205:in `block in execute' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:200:in `each' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:200:in `execute' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:158:in `block in invoke_with_call_chain' /Users/<username>/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/monitor.rb:211:in `mon_synchronize' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:151:in `invoke_with_call_chain' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/task.rb:144:in `invoke' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:116:in `invoke_task' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `block (2 levels) in top_level' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `each' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `block in top_level' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:88:in `top_level' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:66:in `block in run' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/lib/rake/application.rb:63:in `run' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/gems/rake-0.9.2.2/bin/rake:33:in `<top (required)>' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/bin/rake:19:in `load' /Users/<username>/.rvm/gems/ruby-1.9.3-p194@global/bin/rake:19:in `<main>' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `eval' /Users/<username>/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `<main>' Couldn't create database for {"adapter"=>"postgresql", "encoding"=>"unicode", "database"=>"depot_test", "pool"=>5, "username"=>"<username>", "password"=>nil} I have tried createdb depot_development I have tried going into the psql environment and listing users (which included my username among them). In the same psql environment, I tried CREATE DATABASE depot; I've made sure that the pg gem is installed with bundle install, I've run "pg_ctl start", to which I got this response: pg_ctl: no database directory specified and environment variable PGDATA unset I ran "ps aux | grep postgres" to make sure postgres was running, to which I got this in return (which looks like it's doing OK, right?): <username> 10390 0.4 0.0 2425480 180 s000 R+ 6:15PM 0:00.00 grep postgres <username> 2907 0.0 0.0 2441604 464 ?? Ss 6:17PM 0:02.31 postgres: stats collector process <username> 2906 0.0 0.0 2445520 1664 ?? Ss 6:17PM 0:02.33 postgres: autovacuum launcher process <username> 2905 0.0 0.0 2445388 600 ?? Ss 6:17PM 0:09.25 postgres: wal writer process <username> 2904 0.0 0.0 2445388 1252 ?? Ss 6:17PM 0:12.08 postgres: writer process <username> 2902 0.0 0.0 2445388 3688 ?? S 6:17PM 0:00.54 /Applications/Postgres.app/Contents/MacOS/bin/postgres -D /Users/<username>/Library/Application Support/Postgres/var -p5432 The short of it, is I've been troubleshooting for a WHILE and have NO idea what's wrong. Any ideas? I'd really appreciate it, cause I'm pretty new to Rails, and this is a pretty disheartening roadblock. Thanks! EDIT -- Per request, posting the successful database.yml . It seems the difference is the inclusion of a password: development: adapter: postgresql encoding: unicode database: *******_development pool: 5 username: ******* password: ******* EDIT2 -- When I add a password to the .yml file, then run rake db:create again, I get this error. rake aborted! No Rakefile found (looking for: rakefile, Rakefile, rakefile.rb, Rakefile.rb)

    Read the article

  • Finding out why Dell Controler is Degraded

    - by Kyle Brandt
    I installed open manage on a couple of my PE 2950s for snmp monitoring of the RAID. All the checks seem to come back okay except for controllerState: [root@aMachine ~]# snmpwalk -v 2c -c bestNotToPostPasswords myMachine -m +StorageManagement-MIB controllerstate StorageManagement-MIB::controllerState.1 = INTEGER: degraded(6) Other checks seems to indicate the battery, LD, and physicals disks are all good unless I missing something. Can anyone tell if I am missing something or neglecting something import in my RAID monitoring/understanding? I get degraded for both these servers I have set up. A walk of the entire storage management tree for on of them: StorageManagement-MIB::softwareVersion.0 = STRING: "3.2.0" StorageManagement-MIB::globalStatus.0 = INTEGER: warning(2) StorageManagement-MIB::softwareManufacturer.0 = STRING: "Dell Inc." StorageManagement-MIB::softwareProduct.0 = STRING: "Server Administrator (Storage Management)" StorageManagement-MIB::softwareDescription.0 = STRING: "Configuration and monitoring of disk storage devices." StorageManagement-MIB::displayName.0 = STRING: "Server Administrator (Storage Management)" StorageManagement-MIB::description.0 = STRING: "Configuration and monitoring of disk storage devices." StorageManagement-MIB::agentVendor.0 = STRING: "Dell Inc." StorageManagement-MIB::agentTimeStamp.0 = INTEGER: 1273842310 StorageManagement-MIB::agentGetTimeout.0 = INTEGER: 5 StorageManagement-MIB::agentModifiers.0 = INTEGER: 0 StorageManagement-MIB::agentRefreshRate.0 = INTEGER: 300 StorageManagement-MIB::agentMibVersion.0 = STRING: "3.2" StorageManagement-MIB::agentManagementSoftwareURLName.0 = "" StorageManagement-MIB::agentGlobalSystemStatus.0 = INTEGER: nonCritical(4) StorageManagement-MIB::agentLastGlobalSystemStatus.0 = INTEGER: ok(3) StorageManagement-MIB::agentSmartThermalShutdown.0 = INTEGER: notApplicable(3) StorageManagement-MIB::controllerNumber.1 = INTEGER: 1 StorageManagement-MIB::controllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::controllerVendor.1 = STRING: "DELL" StorageManagement-MIB::controllerType.1 = INTEGER: sas(6) StorageManagement-MIB::controllerState.1 = INTEGER: degraded(6) StorageManagement-MIB::controllerRebuildRateInPercent.1 = INTEGER: 30 StorageManagement-MIB::controllerFWVersion.1 = STRING: "5.0.2-0003" StorageManagement-MIB::controllerCacheSizeInMB.1 = INTEGER: 256 StorageManagement-MIB::controllerCacheSizeInBytes.1 = INTEGER: 0 StorageManagement-MIB::controllerPhysicalDeviceCount.1 = INTEGER: 5 StorageManagement-MIB::controllerLogicalDeviceCount.1 = INTEGER: 1 StorageManagement-MIB::controllerRollUpStatus.1 = INTEGER: nonCritical(4) StorageManagement-MIB::controllerComponentStatus.1 = INTEGER: nonCritical(4) StorageManagement-MIB::controllerNexusID.1 = STRING: "\\0" StorageManagement-MIB::controllerAlarmState.1 = INTEGER: disabled(2) StorageManagement-MIB::controllerDriverVersion.1 = STRING: "00.00.03.05 " StorageManagement-MIB::controllerPCISlot.1 = STRING: "embedded" StorageManagement-MIB::controllerClusterMode.1 = INTEGER: notApplicable(99) StorageManagement-MIB::controllerMinFWVersion.1 = STRING: "5.2.1-0067" StorageManagement-MIB::controllerMinDriverVersion.1 = STRING: "00.00.03.21" StorageManagement-MIB::controllerChannelCount.1 = INTEGER: 2 StorageManagement-MIB::controllerReconstructRate.1 = INTEGER: 30 StorageManagement-MIB::controllerPatrolReadRate.1 = INTEGER: 30 StorageManagement-MIB::controllerBGIRate.1 = INTEGER: 30 StorageManagement-MIB::controllerCheckConsistencyRate.1 = INTEGER: 30 StorageManagement-MIB::controllerPatrolReadMode.1 = INTEGER: automatic(1) StorageManagement-MIB::controllerPatrolReadState.1 = INTEGER: stopped(1) StorageManagement-MIB::controllerPatrolReadIterations.1 = INTEGER: 162 StorageManagement-MIB::controllerEntry.57.1 = INTEGER: 99 StorageManagement-MIB::controllerEntry.58.1 = INTEGER: 99 StorageManagement-MIB::channelNumber.1 = INTEGER: 1 StorageManagement-MIB::channelNumber.2 = INTEGER: 2 StorageManagement-MIB::channelName.1 = STRING: "Connector 0" StorageManagement-MIB::channelName.2 = STRING: "Connector 1" StorageManagement-MIB::channelState.1 = INTEGER: ready(1) StorageManagement-MIB::channelState.2 = INTEGER: ready(1) StorageManagement-MIB::channelRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::channelRollUpStatus.2 = INTEGER: ok(3) StorageManagement-MIB::channelComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::channelComponentStatus.2 = INTEGER: ok(3) StorageManagement-MIB::channelNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::channelNexusID.2 = STRING: "\\0\\1" StorageManagement-MIB::channelBusType.1 = INTEGER: sas(8) StorageManagement-MIB::channelBusType.2 = INTEGER: sas(8) StorageManagement-MIB::enclosureNumber.1 = INTEGER: 1 StorageManagement-MIB::enclosureName.1 = STRING: "Backplane" StorageManagement-MIB::enclosureVendor.1 = STRING: "DELL" StorageManagement-MIB::enclosureState.1 = INTEGER: ready(1) StorageManagement-MIB::enclosureProductID.1 = STRING: "BACKPLANE " StorageManagement-MIB::enclosureType.1 = INTEGER: internal(1) StorageManagement-MIB::enclosureChannelNumber.1 = INTEGER: 0 StorageManagement-MIB::enclosureRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::enclosureComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::enclosureNexusID.1 = STRING: "\\0\\0\\0" StorageManagement-MIB::enclosureFirmwareVersion.1 = STRING: "1.00" StorageManagement-MIB::enclosureSASAddress.1 = STRING: "50019090B4C67200" StorageManagement-MIB::arrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskVendor.1 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.2 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.3 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.4 = STRING: "DELL " StorageManagement-MIB::arrayDiskState.1 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.2 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.3 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.4 = INTEGER: online(3) StorageManagement-MIB::arrayDiskProductID.1 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.2 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.3 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.4 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskSerialNo.1 = STRING: "3LN0LRL0 " StorageManagement-MIB::arrayDiskSerialNo.2 = STRING: "3LN0JYJS " StorageManagement-MIB::arrayDiskSerialNo.3 = STRING: "3LN0LR0V " StorageManagement-MIB::arrayDiskSerialNo.4 = STRING: "3LN0JH97 " StorageManagement-MIB::arrayDiskRevision.1 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.2 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.3 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.4 = STRING: "T106" StorageManagement-MIB::arrayDiskEnclosureID.1 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.2 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.3 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.4 = STRING: "0" StorageManagement-MIB::arrayDiskChannel.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInMB.1 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.2 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.3 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.4 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskTargetID.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskTargetID.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskTargetID.3 = INTEGER: 2 StorageManagement-MIB::arrayDiskTargetID.4 = INTEGER: 3 StorageManagement-MIB::arrayDiskLunID.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInMB.1 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.2 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.3 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.4 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskBusType.1 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.2 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.3 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.4 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskSpareState.1 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.2 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.3 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.4 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.2 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.3 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.4 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.2 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.3 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.4 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskNexusID.1 = STRING: "\\0\\0\\0\\0" StorageManagement-MIB::arrayDiskNexusID.2 = STRING: "\\0\\0\\0\\1" StorageManagement-MIB::arrayDiskNexusID.3 = STRING: "\\0\\0\\0\\2" StorageManagement-MIB::arrayDiskNexusID.4 = STRING: "\\0\\0\\0\\3" StorageManagement-MIB::arrayDiskPartNumber.1 = STRING: "SG0DR2381253172FLRL0A00 " StorageManagement-MIB::arrayDiskPartNumber.2 = STRING: "SG0DR2381253172FJYJSA00 " StorageManagement-MIB::arrayDiskPartNumber.3 = STRING: "SG0DR2381253172FLR0VA00 " StorageManagement-MIB::arrayDiskPartNumber.4 = STRING: "SG0DR2381253172FJH97A00 " StorageManagement-MIB::arrayDiskSASAddress.1 = STRING: "5000C50002380201" StorageManagement-MIB::arrayDiskSASAddress.2 = STRING: "5000C50002385B89" StorageManagement-MIB::arrayDiskSASAddress.3 = STRING: "5000C50002385AA9" StorageManagement-MIB::arrayDiskSASAddress.4 = STRING: "5000C500023841E1" StorageManagement-MIB::arrayDiskSmartAlertIndication.1 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.2 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.3 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.4 = INTEGER: no(1) StorageManagement-MIB::arrayDiskManufactureDay.1 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.2 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.3 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.4 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.1 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.2 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.3 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.4 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureYear.1 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.2 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.3 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.4 = STRING: "2005" StorageManagement-MIB::arrayDiskMediaType.1 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.2 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.3 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.4 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskEntry.36.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.4 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.40.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.1 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.2 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.3 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.4 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.4 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.2 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.3 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.4 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.4 = INTEGER: 1 StorageManagement-MIB::batteryNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryName.1 = STRING: "Battery 0" StorageManagement-MIB::batteryVendor.1 = STRING: "DELL" StorageManagement-MIB::batteryState.1 = INTEGER: ready(1) StorageManagement-MIB::batteryRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::batteryComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::batteryNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::batteryPredictedCapacity.1 = INTEGER: ready(2) StorageManagement-MIB::batteryNextLearnTime.1 = INTEGER: 21 StorageManagement-MIB::batteryLearnState.1 = INTEGER: idle(16) StorageManagement-MIB::batteryEntry.13.1 = INTEGER: 0 StorageManagement-MIB::batteryMaxLearnDelay.1 = INTEGER: 168 StorageManagement-MIB::batteryConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryConnectionBatteryName.1 = STRING: "Battery 0" StorageManagement-MIB::batteryConnectionBatteryNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryConnectionControllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::batteryConnectionControllerNumber.1 = INTEGER: 1 StorageManagement-MIB::virtualDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::virtualDiskName.1 = STRING: "Virtual Disk 0" StorageManagement-MIB::virtualDiskDeviceName.1 = STRING: "/dev/sda" StorageManagement-MIB::virtualDiskState.1 = INTEGER: ready(1) StorageManagement-MIB::virtualDiskLengthInMB.1 = INTEGER: 278784 StorageManagement-MIB::virtualDiskLengthInBytes.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskWritePolicy.1 = INTEGER: writeBack(3) StorageManagement-MIB::virtualDiskReadPolicy.1 = INTEGER: noReadAhead(5) StorageManagement-MIB::virtualDiskCachePolicy.1 = INTEGER: not-applicable(99) StorageManagement-MIB::virtualDiskLayout.1 = INTEGER: raid-10(10) StorageManagement-MIB::virtualDiskCurStripeSizeInMB.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskCurStripeSizeInBytes.1 = INTEGER: 65536 StorageManagement-MIB::virtualDiskTargetID.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::virtualDiskComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::virtualDiskNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::virtualDiskArrayDiskType.1 = INTEGER: sas(1) StorageManagement-MIB::virtualDiskEntry.23.1 = INTEGER: 2 StorageManagement-MIB::virtualDiskEntry.24.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.1 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.2 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.3 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.4 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.4 = INTEGER: 1

    Read the article

  • NAS4Free disk encryption and ZFS error

    - by MiNT
    I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

    Read the article

  • wamp server error

    - by Agnes Knox
    I downloaded wamp server, then went to the phpMyAdmin panel and messed around with the privileges of my database, and I gave a new password and username, and now I am getting this message MySQL said: Documentation 1045 - Access denied for user 'root'@'localhost' (using password: NO) I cannot acces my server anymore. ...I tried to reinstall the wamp server and I even did a system reset for a previous date but nothing helped. I tried to find the configuration php in the myadmin library but no luck. Please help!

    Read the article

  • Script to create ODBC connection

    - by Mathew
    I need to deploy some software through SMS/SCCM and the software requires that an ODBC connection be created in Windows. The connection information I was given requires a user name and password. I have a batch script to import the connection information into the registry, however I don't know how to go about putting the user name and password in. I'd like to script this or put it in some kind of distributable package. Thanks, -Mathew

    Read the article

  • bbPress - Login/Register bridge

    - by poru
    Hello, I really need to login to my bbPress forum with my seperate web application, but for that I need to know how the password in the database is encrypted. I already tried to include the functions from "functions.bb-pluggable.php" etc. but that's a mess and don't work. So I need wheter a API/Bridge or how the password is encrypted.

    Read the article

  • Replicate / SYNC / Copy thousands of files

    - by rihatum
    Windows 32BIT Box (Server OS) 4GB RAM a 800GB LUN Mapped to the above box as a local drive Around 700GB of text files (Yes text files and a few thousand word documents) nested in thousands of directories. I need to move this to a new storage and map another server to it. What would be the best way to go about it ? What I did was mapped the existing LUN to our new box and mapped a LUN from the New storage to the new box too, and tried copying (windows copy) but that wasn't good / fast enough considering the downtime. I am now looking for either a script which will do this or a utility (prefer opensource / free) to move this size of data at a good speed. 2 x 1GB Nics teamed ether channel 2GBPs Any suggestions or pointers would be off great help Thanks !

    Read the article

  • logparser Message with error codes

    - by nsr81
    Hi All, Is there anyway to get complete error message using LogParser? When I run the following query: logparser -i:EVT -o:NAT "SELECT TimeGenerated,EventID,Message from System WHERE EventTypeName='Error event'" I get the following output: 2009-09-02 19:35:44 7000 The USB Mass Storage Driver service failed to start due to the following error: %%1058 The full "Message" in EventViewer is: Description: The USB Mass Storage Driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. How can I obtain complete message using logparser?

    Read the article

  • Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • ZFS SAS/SATA controller recommendations

    - by ewwhite
    I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

    Read the article

  • Windows 8 Disk Mirroring vs Intel Fake RAID

    - by Johnny W
    So Windows 8 is out and I have a new motherboard. I wish to create a RAID 1 coupling between two HDDs -- for storage purposes only (my OS is on an SSD) -- but I don't know which is the best route to take. My motherboard (Z77 chipset) comes with the age old Intel Fake RAID, but since I only wish to use my RAID for storage, I wondered if I might be better to use Windows 8 Disk Mirroring. Can anyone advise which is better? Or perhaps the pros and cons of each, if that's too contentious? I just can't see the benefit of FakeRAID. You can see my current setup here, if that might change things(?): Thanks!

    Read the article

  • XSL using apply templates and match instead of call template

    - by AdRock
    I am trying to make the transition from using call-template to using applay templates and match but i'm not getting any data displayed only what is between the volunteer tags. When i use call template it works fine but it was suggested that i use applay-templates and match and not it doesn't work Any ideas how to make this work? I can then applay it to all my stylesheets. <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:key name="volunteers-by-region" match="volunteer" use="region" /> <xsl:template name="hoo" match="/"> <html> <head> <title>Registered Volunteers</title> <link rel="stylesheet" type="text/css" href="volunteer.css" /> </head> <body> <h1>Registered Volunteers</h1> <h3>Ordered by the username ascending</h3> <h3>Grouped by the region</h3> <xsl:for-each select="folktask/member[user/account/userlevel='2']"> <xsl:for-each select="volunteer[count(. | key('volunteers-by-region', region)[1]) = 1]"> <xsl:sort select="region" /> <xsl:for-each select="key('volunteers-by-region', region)"> <xsl:sort select="folktask/member/user/personal/name" /> <div class="userdiv"> <xsl:apply-templates/> <!--<xsl:call-template name="member_userid"> <xsl:with-param name="myid" select="../user/@id" /> </xsl:call-template> <xsl:call-template name="member_name"> <xsl:with-param name="myname" select="../user/personal/name" /> </xsl:call-template>--> </div> </xsl:for-each> </xsl:for-each> </xsl:for-each> <xsl:if test="position()=last()"> <div class="count"><h2>Total number of volunteers: <xsl:value-of select="count(/folktask/member/user/account/userlevel[text()=2])"/></h2></div> </xsl:if> </body> </html> </xsl:template> <xsl:template match="folktask/member"> <xsl:apply-templates select="user/@id"/> <xsl:apply-templates select="user/personal/name"/> </xsl:template> <xsl:template match="user/@id"> <div class="heading bold"><h2>USER ID: <xsl:value-of select="." /></h2></div> </xsl:template> <xsl:template match="user/personal/name"> <div class="small bold">NAME:</div> <div class="large"><xsl:value-of select="." /></div> </xsl:template> </xsl:stylesheet> and my xml file <folktask xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="folktask.xsd"> <member> <user id="1"> <personal> <name>Abbie Hunt</name> <sex>Female</sex> <address1>108 Access Road</address1> <address2></address2> <city>Wells</city> <county>Somerset</county> <postcode>BA5 8GH</postcode> <telephone>01528927616</telephone> <mobile>07085252492</mobile> <email>[email protected]</email> </personal> <account> <username>AdRock</username> <password>269eb625e2f0cf6fae9a29434c12a89f</password> <userlevel>4</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="1"> <roles></roles> <region>South West</region> </volunteer> </member> <member> <user id="2"> <personal> <name>Aidan Harris</name> <sex>Male</sex> <address1>103 Aiken Street</address1> <address2></address2> <city>Chichester</city> <county>Sussex</county> <postcode>PO19 4DS</postcode> <telephone>01905149894</telephone> <mobile>07784467941</mobile> <email>[email protected]</email> </personal> <account> <username>AmbientExpert</username> <password>8e64214160e9dd14ae2a6d9f700004a6</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="2"> <roles>Van Driver</roles> <region>South Central</region> </volunteer> </member> <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="3"> <roles>Scaffold Erector</roles> <region>South West</region> </volunteer> </member> </folktask>

    Read the article

  • google-app-engine-django: authentication without Google accounts?

    - by cv12
    google-app-engine-django/ claims to have an "App Engine compatible implementation of the Django authentication framework". Does this authentication work only with Google Accounts? Is it possible to register a user with a username/password and authenticate him/her with that username/password without that user having a Google account? I would appreciate any pointers to how this could be done with google-app-engine-django without Google Accounts authentication.

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • How to Remove a VM From Hyper-V Without Deleting the Configuration File?

    - by Steven Murawski
    I'm in the process of moving a number of virtual machines that are homed on shared storage (a file share, though shared cluster disk would work as well) to a new VM host with access to the same shared storage. The new host is a different build version (moving from Windows Server 2012 Beta to Windows Server 2012 RC - though this same process could be used with migrations of Windows Server 2008/2008 R2 to Windows Server 2012 as well), so I cannot migrate the machine with inbox tooling. I need to remove the VM from management of the source Hyper-V host in order to import the VM to the new Hyper-V host. I want to retain the configuration file, so I can import the VM as it stands and not need to reconfigure it. The VHD files are rather large and they are staying on the same file share, so I'd rather not duplicate them during the move process.

    Read the article

  • local cache for NAS or network folder

    - by HugoRune
    I am planning to build a network attached storage (NAS) server. Is there a way to cache frequently acccessed files from the remote storage automatically on the local PC? (I am not looking for a way to sync whole folders like rsync, but rather something that automatically and transparently caches the last accessed 50 gb of files.) Ideally I am searching for something that caches writes as well as reads, since only one pc will be accessing the server (and one day of lost changes if the local cache is damaged would be acceptable) I looked into windows offline files, but as far as I could tell this requires manual interaction to disconnect the server or go into offline mode in order to use the cache. The server would probably be running Linux or freeNAS, the pc runs Windows xp, but could be upgraded to 7 if required.

    Read the article

  • INNODB mysql. Plugin disabled

    - by alexcunn
    When I startup mysql on my unbuntu server I will get a message. 121122 17:39:37 [Note] Plugin 'FEDERATED' is disabled. 121122 17:39:37 InnoDB: The InnoDB memory heap is disabled 121122 17:39:37 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121122 17:39:37 InnoDB: Compressed tables use zlib 1.2.3.4 121122 17:39:37 InnoDB: Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 121122 17:39:37 InnoDB: Completed initialization of buffer pool 121122 17:39:37 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121122 17:39:37 [ERROR] Plugin 'InnoDB' init function returned error. 121122 17:39:37 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121122 17:39:37 [ERROR] Unknown/unsupported storage engine: InnoDB 121122 17:39:37 [ERROR] Aborting 121122 17:39:37 [Note] mysqld: Shutdown complete a few times I have got a message saying that the plugin is disabled. I use webmin to configure it. Could that be a problem?

    Read the article

  • OpenJPA + Tomcat JDBC Connection Pooling = stale data

    - by Julie MacNaught
    I am using the Tomcat JDBC Connection Pool with OpenJPA in a web application. The application does not see updated data. Specifically, another java application adds or removes records from the database, but the web application never sees these updates. This is quite a serious issue. I must be missing something basic. If I remove the Connection Pool from the implementation, the web application sees the updates. It's as if the web application's commits are never called on the Connection. Version info: Tomcat JDBC Connection Pool: org.apache.tomcat tomcat-jdbc 7.0.21 OpenJPA: org.apache.openjpa openjpa 2.0.1 Here is the code fragment that creates the DataSource (DataSourceHelper.findOrCreateDataSource method): PoolConfiguration props = new PoolProperties(); props.setUrl(URL); props.setDefaultAutoCommit(false); props.setDriverClassName(dd.getClass().getName()); props.setUsername(username); props.setPassword(pw); props.setJdbcInterceptors("org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;"+ "org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer;"+ "org.apache.tomcat.jdbc.pool.interceptor.SlowQueryReportJmx;"+ "org.apache.tomcat.jdbc.pool.interceptor.ResetAbandonedTimer"); props.setLogAbandoned(true); props.setSuspectTimeout(120); props.setJmxEnabled(true); props.setInitialSize(2); props.setMaxActive(100); props.setTestOnBorrow(true); if (URL.toUpperCase().contains(DB2)) { props.setValidationQuery("VALUES (1)"); } else if (URL.toUpperCase().contains(MYSQL)) { props.setValidationQuery("SELECT 1"); props.setConnectionProperties("relaxAutoCommit=true"); } else if (URL.toUpperCase().contains(ORACLE)) { props.setValidationQuery("select 1 from dual"); } props.setValidationInterval(3000); dataSource = new DataSource(); dataSource.setPoolProperties(props); Here is the code that creates the EntityManagerFactory using the DataSource: //props contains the connection url, user name, and password DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); If I comment out the DataSource like so, then it works. Note that OpenJPA has enough information in the props to configure the connection without using the DataSource. //props contains the connection url, user name, and password //DataSource dataSource = DataSourceHelper.findOrCreateDataSource("DATAMGT", URL, username, password); //props.put("openjpa.ConnectionFactory", dataSource); emFactory = (OpenJPAEntityManagerFactory) Persistence.createEntityManagerFactory("DATAMGT", props); So somehow, the combination of OpenJPA and the Connection Pool is not working correctly.

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >