Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 210/441 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Need database selection advise

  - by jacknad

  I know this is considered a bad question since there is no correct answer, but I need to decide on a database for embedded linux (DaVinci 368 based) hardware and I've never had to produce a design with a database before. Each record will probably contain less than 1000 images with associated alpha-numeric data and the mass storage will be some kind of flash drive. Only one user needs access to the data at a time. MySQL claims to be "The world's most popular open source database" but SQLite claims to be "the most widely deployed SQL database engine in the world." Perhaps there is another that is also the best in the world? Which is easiest to use for a database newbie? Should I just flip a coin? Does it really matter which one I pick? Do I even need to use a database software package or should I roll my own? I won't need bells and whistles like sorting, but I'll probably need to delete the oldest records to make room for new ones if the storage fills up.

  Read the article

• Black screen appears when booting new install of 11.10 on my desktop, cannot access Grub menu to fix

  - by Cee

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• Shared Database Servers

  - by shivanshu.upadhyay

  As more enterprises consolidate their database environments to support private cloud initiatives, ISVs will have to deal with sceanrios where they need to run on a shared powerful database server like Exadata. Some ISVs are concerned about meeting SLAs for performance in a shared environment. Outside the virtualization world, there are capabilities of Oracle Database which can be used to prevent resource contention and guarantee SLA. These capabilities are - 1) Instance Caging - This guarantees the CPU allocated or limits the maximum number of CPUs (and so the number of Oracle processes) that an instance of Database can use simultaneously. With this feature, ISVs can be assured that their application is allocated adequate CPUs even if the database server is shared with other applications. 2) CPU Resource Allocation with Database Resource Manager - This allocates percentages of CPU time to different users and applications within a database. ISVs can use this feature to ensure that priority user or workloads within their application get CPU resources over other requirements. 3) Exadata I/O Resource Manager - The Database Resource Manager feature in Oracle Database 11g has been enhanced for use with Exadata. This allows the sharing of storage between databases without fear of one database monopolizing the I/O bandwidth and impacting the performance of the other databases sharing the storage. This can be used to ensure that I/O does not become a performance bottleneck due to poor design of other applications sharing the same server.

  Read the article

• Ubuntu not shutting down ( going to black screen ) 12.04

  - by Orrin Fox

  I am currently using a USB persistent install of ubuntu. its a simple 4GB drive with a 2.8GB partition ( casper-rw storage partition ). I setup an administrator account and set it to login automatically. I also removed ubiquity to simply use this as a go anywhere install. Heres my issue. Im logged in as my account, and I click the top right gear and select "shut down". Text pops up showing its quitting processes.. etc. and then goes to the plymouth animation. But... The screen goes black, and then it goes to the login screen. Now when im at the login screen i go into terminal ( alt+F2 ) and dont you know, im logged in as Ubuntu. so then I try the following: ubuntu@ubuntu:~$ sudo shutdown now It goes to the plymouth screen again as if its shutting down, AND the screen goes black once again but the computer has not turned off, as in the usb is still flashing the light, the fans are still on, the only thing off is the screen. Is this a bug? If not maybe i did something wrong? Perhaps its that I made an account but... if there is a work around for this please let me know. Thanks again, Fox

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• How to run installation CD for second monitor?

  - by dobsoft

  I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• What extra packages are needed by Amarok to transcode to MP3?

  - by Jon Pawley

  I'm using Amarok 2.6.0, on KDE version 4.9.3, on Kubuntu 12.04. I would like to be able to copy my music onto my MP3 player (in this case, my iPhone 3), but to transcode the tracks as I copy them over. However, when I right-click on the selected track, and choose "Copy to Collection" and select my iPhone, the option to transcode to MP3 is greyed out. What additional packages does Amarok need in order to enable the transcode to MP3 option? Thanks, Jon Oh, the "Amarok DIagnostics" output, from the Help menu gives: Amarok Diagnostics Amarok Version: 2.6.0 KDE Version: 4.9.3 Qt Version: 4.8.2 Phonon Version: 4.6.0 Phonon Backend: GStreamer (4.6.2) PulseAudio: Yes Amarok Scripts: Amarok Script Console 1.0 (stopped) Discogs 1.1b (stopped) Lyricwiki .2 (stopped) Free Music Charts 1.6.0 (stopped) Librivox.org 1.0 (stopped) Cool Streams 1.0 (stopped) BBC 1.1 (stopped) Amarok Plugins: AudioCd Collection (enabled) DAAP Collection (enabled) MTP Collection (enabled) MySQLServer Collection (enabled) MySQLe Collection (enabled) UPnP Collection (enabled) Universal Mass Storage Collection (enabled) iPod, iPad & iPhone Collection (enabled) Ampache (disabled) Jamendo (disabled) Last.fm (enabled) MP3 Music Store (disabled) MP3tunes (disabled) Magnatune Store (disabled) Podcast Directory (enabled) gpodder.net (enabled) Local Files & USB Mass Storage Backend (enabled) NFS Share Backend (enabled) SMB (Windows) Share Backend (enabled)

  Read the article

• November eSTEP nyhedsbrev til hardware partner presales

  - by user12842157

  Kære partner,Vi vil hermed gøre dig opmærksom på at November versionen af vores eSTEP nyhedsbrev nu kan findes på eSTEP portalen. Du finder omtalte nyhedsbrev på vores portal under eSTEP News ---> Latest Newsletter. For at få access til portalen skal du bruge linket nederst i denne blog. Nyt fra Oracle: Reflektioner over Oracle OpenWorld, Oracle Buys GoAhead Det tekniske hjørne: T4 processor, SPARC SuperCluster T4-4, Pillar Axiom 600,  Oracle ZFS Appliance,  Hybrid Columnar Compression Support for ZFS Storage Appliances and Pillar Axiom Storage Systems, Oracle Exalytics In-memory Machine, Oracle Big Data Appliance, Oracle Database Express Edition 11g Release 2(Oracle Database XE), Oracle Public Cloud Træning og events: eSTEP Events Schedule, Recently Delivered TechCasts, Delivered Campaigns in 2011, Q&A covering Oracle Database Appliance How to ...: Oracle Server Finder - choose the system that is right for your, Power calculator for all the HW, SW documentation search , TO YOUR ATTENTION - Remarks to new configuration-options for 7120 URL: http://launch.oracle.com/PIN: er sendt til vores kontaktliste, ellers henvend dig til : [email protected] versioner af dette nyhedsbrev kan findes på portalen under "Archived Newsletters", mere information findes også under Events, Download og Links.Vi værdsætter enhver feed back på indholdet på portalen og anden information vi leverer.Med venlig hilsenPartner HW Enablement EMEA

  Read the article

• Oracle SPARC SuperCluster and US DoD Security guidelines

  - by user12611852

  I've worked in the past to help our government customers understand how best to secure Solaris.  For my customer base that means complying with Security Technical Implementation Guides (STIGs) from the Defense Information Systems Agency (DISA).  I recently worked with a team to apply both the Solaris and Oracle 11gR2 database STIGs to a SPARC SuperCluster.  The results have been published in an Oracle White paper. The SPARC SuperCluster is a highly available, high performance platform that incorporates: SPARC T4-4 servers Exadata Storage Servers and software ZFS Storage appliance InfiniBand interconnect Flash Cache  Oracle Solaris 11 Oracle VM for SPARC Oracle Database 11gR2 It is targeted towards large, mission critical database, middleware and general purpose workloads.  Using the Oracle Solution Center we configured a SSC applied DoD security guidance and confirmed functionality and performance of the system.  The white paper reviews our findings and includes a number of security recommendations.  In addition, customers can contact me for the itemized spreadsheets with our detailed STIG reports. Some notes: There is no DISA STIG  documentation for Solaris 11.  Oracle is working to help DISA create one using their new process. As a result, our report follows the Solaris 10 STIG document and applies it to Solaris 11 where applicable. In my conversations over the years with DISA Field Security Office they have repeatedly told me, "The absence of a DISA written STIG should not prevent a product from being used.  Customer may apply vendor or industry security recommendations to receive accreditation." Thanks to the core team: Kevin Rohan, Gary Jensen and Rich Qualls as well as the staff of the Oracle Solution Center and Glenn Brunette for their help in creating the document.

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• Using json as database with EF, how can I link EF and the json file during DbContext initialization?

  - by blacai

  For a personal testing-project I am considering to create a SPA with the following technologies: ASP.NET MVC + EF + WebAPI + AngularJS. The project will make use of small amount of data, so I was thinking I could use just a .json file as storage. But I am not sure about how to proceed with the link between EF and the json file in the initialization of the DbContext. I found a stackoverflow related question: http://stackoverflow.com/questions/13899342/can-we-use-json-as-a-database I know the basics of edit files and store data inside. What I tried is to get the data from the json file in the initilizer method and create the objects one by one. This is more a doubt about how this works if I save/update an object in the dbcontext, do I need to go through all the elements and add/update it manually? Is it better to rewrite the complete file? According to this http://stackoverflow.com/questions/7895335/append-data-to-a-json-file-with-php it is not a good practice to use json/XML for data wich will be manipulated. Anyone has experience with anything similar? Is this a really bad idea and I should use another kind of data-storage?

  Read the article

• juju -v status ERROR Invalid SSH key

  - by Captain T

  root@cloudcontrol:/storage# juju -v status 2012-06-07 11:19:47,602 DEBUG Initializing juju status runtime 2012-06-07 11:19:47,621 INFO Connecting to environment... 2012-06-07 11:19:47,905 DEBUG Connecting to environment using node-386077143930... 2012-06-07 11:19:47,906 DEBUG Spawning SSH process with remote_user="ubuntu" remote_host="node-386077143930" remote_port="2181" local_port="57004". The authenticity of host 'node-386077143930 (10.5.5.113)' can't be established. ECDSA key fingerprint is 31:94:89:62:69:83:24:23:5f:02:70:53:93:54:b1:c5. Are you sure you want to continue connecting (yes/no)? yes 2012-06-07 11:19:52,102 ERROR Invalid SSH key 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@662: Client environment:host.name=cloudcontrol 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-23-generic 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@671: Client environment:os.version=#36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@679: Client environment:user.name=sysadmin 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@687: Client environment:user.home=/root 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@699: Client environment:user.dir=/storage 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=localhost:57004 sessionTimeout=10000 watcher=0x7feb11afc6b0 sessionId=0 sessionPasswd= context=0x2dc7d20 flags=0 2012-06-07 11:19:52,429:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-06-07 11:19:55,765:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client This is from a clean install with 2 nodes all running 12.04 Precise juju bootstrap - finishes with no errors and allocates the machine to the user but still no joy after juju environment-destroy and rebuild with different users and different nodes. Anyone got any ideas

  Read the article

• Upgrade from 11.04 to 12.04 failed - unable to login

  - by Tobias M.

  Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

  Read the article

• What would cause SSD to become not detectable?

  - by Balthazar

  I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

  Read the article

• Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

  - by user180782

  Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

  Read the article

• Invalid SSH key erron in juju

  - by Captain T

  This is the output of juju from a clean install with 2 nodes all running 12.04 Precise juju bootstrap - finishes with no errors and allocates the machine to the user but still no joy after juju environment-destroy and rebuild with different users and different nodes. root@cloudcontrol:/storage# juju -v status 2012-06-07 11:19:47,602 DEBUG Initializing juju status runtime 2012-06-07 11:19:47,621 INFO Connecting to environment... 2012-06-07 11:19:47,905 DEBUG Connecting to environment using node-386077143930... 2012-06-07 11:19:47,906 DEBUG Spawning SSH process with remote_user="ubuntu" remote_host="node-386077143930" remote_port="2181" local_port="57004". The authenticity of host 'node-386077143930 (10.5.5.113)' can't be established. ECDSA key fingerprint is 31:94:89:62:69:83:24:23:5f:02:70:53:93:54:b1:c5. Are you sure you want to continue connecting (yes/no)? yes 2012-06-07 11:19:52,102 ERROR Invalid SSH key 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@662: Client environment:host.name=cloudcontrol 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-23-generic 2012-06-07 11:19:52,426:18541(0x7feb13b58700):ZOO_INFO@log_env@671: Client environment:os.version=#36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@679: Client environment:user.name=sysadmin 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@687: Client environment:user.home=/root 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@log_env@699: Client environment:user.dir=/storage 2012-06-07 11:19:52,428:18541(0x7feb13b58700):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=localhost:57004 sessionTimeout=10000 watcher=0x7feb11afc6b0 sessionId=0 sessionPasswd=<null> context=0x2dc7d20 flags=0 2012-06-07 11:19:52,429:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client 2012-06-07 11:19:55,765:18541(0x7feb0e856700):ZOO_ERROR@handle_socket_error_msg@1579: Socket [127.0.0.1:57004] zk retcode=-4, errno=111(Connection refused): server refused to accept the client

  Read the article

• How to create or recover Windows Bootloader after deleting Ubuntu boot drive

  - by Kincaid

  I have a computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I decided to remove Ubuntu, as I hardly used it. I deleted the Ubuntu partition accidentally before replacing the Grub bootloader. Now, whenever I want to boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Are there any other options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine (I can use EasyBCD from there). Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows.

  Read the article

• How do I get a Laserjet M1212nf MFP working?

  - by Leandro

  I am trying to install a multifunctional printer Laserjet M1212nf MFP on Ubuntu 12.04. I downloaded and install the hplip indicated by the official web site. At the end of the installation I chose reboot the whole system and next I call hp-setup in the terminal (as normal user and then as root). After select in the dialog box my printer I got the following error: Searching... (bus=usb, search=(None), desc=0)<br> /Traceback (most recent call last):<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1255, in NextButton_clicked<br> self.showAddPrinterPage()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 690, in showAddPrinterPage<br> self.readwriteFaxInformation()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1079, in readwriteFaxInformation<br> self.fax_name_company = unicode(d.getStationName())<br> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 20: ordinal not in range(128) I think at this stage the plugin should be downloaded, but it is not working. Any suggestion on how to solve this problem ? Edition: After running hp-toolbox I got the following error message : Unable to communicate with device (code=12): hp:/usb /HP_LaserJet_Professional_M1212nf_MFP?serial=000000000ST10HPQSI1c

  Read the article

• Mouse click events are delayed when moving the cursor in xubuntu 12.04

  - by bobbaluba

  I am trying out live xubuntu on my samsung n150 (netbook, similar to eeepc). So far everything seems perfect, except for this one thing. When I am clicking the mouse while moving the cursour, the click event is delayed. This is extremely annoying when i try to to move windows, because i end up clicking the window behind the window i am trying to move and thereby changing focus. This goes for all applications. I.e selecting text is difficult. There is no lag in the cursor movement, just the click event. The click event is registered with the new mouse position, not the one when the mouse was clicked. I tried searching for the problem, but all the other cases where either kind of different, or had no solution. EDIT: After testing some more, here are some more information. The click doesn't occur until i stop moving the cursor. If I move the cursor smoothly around, the click never gets through. I have ubuntu netbook remix 10.04 installed, and have no problems with the mouse there. EDIT2: Once I connected a usb-mouse, the problem dissappeared. Dragging now works perfectly with both the track pad and the usb mouse. I will update once I have installed xubuntu and figured out if this is a persistant problem. EDIT3: I have installed, and the problem is still there. It dissappears when I have a second mouse connected however, and after I resume from suspend. My solution for now, is just to keep the dongle connected all the time.

  Read the article

• OVM Server for SPARC Enhancements

  - by Owen Allen

  Oracle VM Servers for SPARC saw a few improvements in Ops Center 12.2. In addition to brownfield support, we've made a number of enhancements to let you add OVM Servers for SPARC to a Server Pool and enable migration of their guests. -When you discover an OVMSS Control Domain and manage it with an Ops Center Agent, its guests are automatically discovered as well. The guest metadata is initially put in the local metadata library in the /guests directory, but you can move it from one library to another to enable migration.-Once you've discovered an OVMSS control domain, you can add it to a server pool, even if it's already configured and running logical domains. Even if live migration between OVMSS systems isn't possible due to CPU incompatibilities, you can still put them in a server pool together and enable guest recovery by configuring the CPU architecture of the guest domain as generic. -You can mark a guest's storage as shared to indicate that it's available to other managed OVM Server systems with the same back-end name. This lets you use storage not fully managed in an Ops Center library as part of guest migration. Put together, these enhancements make it much easier to manage and maintain OVMSS guests.

  Read the article

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• How to install Wacom Bamboo Pen

  - by casadrya

  I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit. After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. Nothing special happened. I opened Inkscape. The tablet didn't work. I opened Inkscape's Input devices dialog. I didn't understand anything. I tried to blindly click some options in that dialog but nothing seemed to have any effect. Same with Gimp. After googling some more I found the linuxwacom website with source code, this didn't seem to work. So... any help? As requested: lsusb Bus 005 Device 002: ID 056a:00d4 Wacom Co., Ltd dmesg | tail [ 492.961267] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 493.144862] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 [ 493.158854] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input7

  Read the article

• CodePlex Daily Summary for Wednesday, July 30, 2014

  CodePlex Daily Summary for Wednesday, July 30, 2014Popular ReleasesGhostscript.NET: Ghostscript.NET v.1.1.9.: v.1.1.9. fixed problem with the PDF invisible layers (the optional content groups which will be left unmarked if processtrailerattrs is not executed). fixed text rasterization problem for some pdf's, it seems that the 'pdfopen begin' did not initialize everything required to render pdf properly so we replaced it with the 'runpdfopen' method which corrects everything (problem reported by "xatabhk"). changed GhostscriptRasterizer methods to support Stream insted of the MemoryStream. fixed...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityTEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titleSharePoint 2010 & 2013 Google Maps V3 WebPart: SPGoogleMap webpart - SharePoint 2013 - July 2014: Google API key support added. The webpart does not need it but if you have one you can use it.QuieNet: Version 2.0: Replaced autoplay prevention mechanism: instead of replacing the player itself, only the function that starts the player is replaced. This only works for video players for now, and live streams are handled as before.XamlImageConverter: Xaml Image Converter 3.11: Improvements: - ASP.NET 64bit support for html2pdf. - Attribute to suppress parallel execution. - Ghostscript rendering. - No need for a snapshot for a imagemap, you can use original svg image.Automatic Parallel Computing: APC SDK 2.1: Features: integration with Amazon DynamoDB. Includes: Investment Club Benchmark Investor Ranking BenchmarkCatchException (Manage Exception): CatchMe Exception Version 1.0: Code SourceDnnFoundation Skin for DnnCMS: DnnC DnnFoundation Skin: First release of the DnnC DnnFoundation SkinQND Operations Manager SNMP Monitoring: QND.SNMP.Library version 1.0.0.103: fixed bug #1815FlMML customized: FlMML customized c.s.30938: ????????LFO、?????LFO??????。 ???·Y·????LFO、??????????????????。 ???LFO????????????????????。CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...New ProjectsAdmin QuikView for Dynamics CRM 2013: Admin QuickView is a gives you a quick hierarchical snapshot of all active Business Units, Teams, Security Roles and Users in your Dynamics CRM Organization.All bots: Windows Phone app to chat with bots from http://www.pandorabots.com/Calculator Proj: Calculator with power hexadecimal binary option and more... Computational Network Toolkit (CNTK): Computational networks (CNs) generalize models that can be described as a series of computational steps such as DNN, CNN, RNN, LSTM, and maximum entropy models.DelegateExpressionizer: Library is intended to decompile delegate code at runtime and build and appropriate expression tree.Hystaspes: Logistics Management System: Logistics Management SystemKinect Experiments: This repository contains various code samples, proof-of-concepts and utilities for Kinect for Windows (v1.8 and v2)ppcs: Placement Project Version 1.0.0.0Reusable MVC Partial View with JQuery Datatables: Reusable jQuery DataTables integrated with in a Partial View of MVC 4.0 is a reusable control/view written entirely in C# and JQuery, my aim was to create a MVCShared Code Project Template for Visual Studio 2013 Update 2: This Project contains the source code for a Shared Project template for VS 2013 which extends the shareing of code to all Project types besides universal apps. Text word search: This project is a sample for searching words in a notepad or a word file through wpf platform. Trace And Watch: Trace And Watch is a Pintool developed to assist in finding 32-bit integer errors.Vtron Automatic tester screen parameters: VTRONWalli: Walli is an open source SalesForce integrated developer environment(IDE) application written in .NET.Windows Kirlian WiFi App: Illustrates the radio field generated by WiFiWOMPS - What's new On My PLEX Server: Purpose of this project is to send an user a weekly or daily email of all new content add to their Plex library.

  Read the article

• Internal hard drive, can't format

  - by user113923

  I cannot format anymore the hard drive of my laptop. Here is how I proceed: I am starting my computer with a USB live drive (Ubuntu 10.04 LTS - the Lucid Lynx). Then I start disk utility and try to format the hard drive - I choosed to format the Master boot record but I get the following error: Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sda: Input/output error If I try to delete partitions I get the following error Error erasing: helper exited with exit code 1: In part_del_partition: device_file=/dev/sda, offset=32256 Entering MS-DOS parser (offset=0, size=30005821440) MSDOS_MAGIC found looking at part 0 (offset 32256, size 4096157184, type 0x83) new part entry looking at part 1 (offset 10618836480, size 8414461440, type 0x83) new part entry looking at part 2 (offset 19033297920, size 1077511680, type 0x82) new part entry looking at part 3 (offset 20110809600, size 9895011840, type 0x07) new part entry Exiting MS-DOS parser MSDOS partition table detected got it got disk got partition - part-type=0 Error: Input/output error during write on /dev/sda ped_disk_commit_to_dev() failed If I try to install ubuntu frrom the usb on the hard drive and choose erase and use the entire disk I get the error message Input/output error during write on /dev/sda For side infos I have at the moment 4 partitions on my hard drive: /dev/sda1 (ext2) /dev/sda2 (ext2) /dev/sda3 (swap) /dev/sda1 (ntfs) + /dev/sda (unlocated Space) My ultimate goal is to reinstall ubuntu and have only 2 partitions... I would really appreciate any help here! Thanks JB

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >