Search Results

Search found 70915 results on 2837 pages for 'file permissions'.

Page 211/2837 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Adding an user to samba

  - by JustMaximumPower

  I'm trying to setup some samba shares in my home network on an Ubuntu 12.04 machine. Everything works fine for my user account (max) but I can not add any new user. Every time I try to add new user they can not use the shares. It's likely that the error is very basic to the concept of samba but please don't just tell me to read the docs. I've been trying that for about 2 weeks now. I've set up the server with my user max who can mount transfer and the share max. Than I added the user simon with sudo adduser --no-create-home --disabled-login --shell /bin/false simon because the user should not be able to ssh into the machine. I did an sudo smbpasswd -a simon and set an (samba) password for simon and added an share for simon. I also added simon to transferusers to give him access to the share transfer. But simon can't connect to transfer or simons. ---- output of testparam: ------- Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Processing section "[max]" Processing section "[simons]" Processing section "[transfer]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [max] comment = Privater share von Max path = /media/Main/max read only = No create mask = 0700 [simons] comment = Privater share von Simon path = /media/Main/simon read only = No create mask = 0700 [transfer] comment = Transferlaufwerk path = /media/Main/transfer read only = No create mask = 0755 ---- The files in /media/Main: ------ drwxrwxr-x 17 max max 4096 Oct 4 19:13 max/ drwx------ 5 simon max 4096 Aug 4 15:18 simon/ drwxrwxr-x 7 max transferusers 258048 Oct 1 22:55 transfer/

  Read the article

• Ubuntu rm not deleting files

  - by ILMV

  My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

  Read the article

• Ubuntu: Getting rid of a mimetype entry

  - by Epaga

  I have a pesky mimetype entry that I can't seem to get rid of. Here is the current situation: xdg-mime query filetype myfile.mfe application/pesky Using assogiate I have found out the information about this mime type entry (but can't delete it there). I have the following 'pesky.xml' XML file which was used to create the mime type (as far as I can tell, since it exactly matches the entry in assogiate...): <?xml version='1.0'?> <mime-info xmlns='http://www.freedesktop.org/standard'> <mime-type type="application/pesky"> <comment>my pesky type</comment> <glob pattern="*.mfe"/> <magic priority="100"> <match type="string" offset="0" value="application/pesky"/> </magic> </mime-type> <mime-info> However, the following has no effect: sudo xdg-mime uninstall --mode system --novendor pesky.xml The file association remains. Any ideas?

  Read the article

• How to transfer files via infrared on Linux?

  - by arielnmz

  I know this is a way too old technology but I've got some files inside a very old cellphone that I need to transfer to a very old computer. So far my Infrared USB device works well, it's detected by the machine (lsusb output): Bus 002 Device 002: ID 0df7:0620 Mobile Action Technology, Inc. MA-620 Infrared Adapter I've tried to send the file over MMS and even email (it lacks bluetooth, not to mention USB). But this cellphones's firmware doesn't let me attach the files. The file was originally transfered via IrDA, and it only has an internal memory (a whole 2 million bytes! whoa!). I found a package called irda-utils, but it seems that there are only two executables: irdaping and irdadump. I think the dump utility might do the job (which as far as I can see it's kind of a version of tcpdump but for IrDA), but I don't even know how to process the received frames. Could this question may be what I'm looking for? EDIT While reading through the Linux Infrared HOWTO I found about the OpenObex project, which may be what I'm looking for...

  Read the article

• Why doesn't my symbolic link work?

  - by orokusaki

  I'm trying to better understand symbolic links... and not having very much luck. This is my actual shell output with username/host changed: username@host:~$ mkdir actual username@host:~$ mkdir proper username@host:~$ touch actual/file-1.txt username@host:~$ echo "file 1" > actual/file-1.txt username@host:~$ touch actual/file-2.txt username@host:~$ echo "file 2" > actual/file-2.txt username@host:~$ ln -s actual/file-1.txt actual/file-2.txt proper username@host:~$ # Now, try to use the files through their links username@host:~$ cat proper/file-1.txt cat: proper/file-1.txt: No such file or directory username@host:~$ cat proper/file-2.txt cat: proper/file-2.txt: No such file or directory username@host:~$ # Check that actual files do in fact exist username@host:~$ cat actual/file-1.txt file 1 username@host:~$ cat actual/file-2.txt file 2 username@host:~$ # Remove the links and go home :( username@host:~$ rm proper/file-1.txt username@host:~$ rm proper/file-2.txt I thought that a symbolic link was supposed to operate transparently, in the sense that you could operate on the file that it points to as if you were accessing the file directly (except of course in the case of rm where of course the link is simply removed).

  Read the article

• download management

  - by Jonathan

  I download many files, usually 2 or 3 a day, often 10ish. Some of them are duplicates because I just can't be bothered to find the original in my downloads folder. I have previously tried DAP and used that to create a new subfolder for each day's download. yet I have found this insufficient as sometimes I wish to find files by name/file type or I have multiple parts of downloads over more than one day. Another problem I have found is zips/rars/etc after downloading them and extracting them I then have the zip and the folder. I like it like on a Mac where it automatically extracts the zip after it has been downloaded and removes the zip. What I'd like to be able to do is sort the downloads by date, but dynamically so they are just in the big downloads folder, but I can just press a button and it will show me all the files from a particular site, or from a particular day or by a certain file type. Is there any software that will do this? I use Chrome as a browser but also have Firefox and like that. Jonathan

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

  - by Dejan Janjuševic

  At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

  Read the article

• Windows Photo Viewer can't open this picture because you don't have the correct permissions to access the file location

  - by Software Monkey

  My system in Windows 7 and fully up to date with all patches and options (except for Microsoft Silverlight, which I refuse to install). I get this error whenever I try to open an image using Windows Photo Viewer, such as when previewing from Explorer or when opening an image attachment to an email. I have already verified correct permissions to the file and all folders in the path. The strange thing is that every other program I have seems to open the images fine, including "Slideshow" from Windows Explorer. Even more strange, in WPV there is an "Open" menu that lists the other programs for images including GIMP and MS Paint and they open the very file that WPV is complaining about just fine. That should eliminate permissions as being the problem, especially since (logically at least) they are read/write while WPV is read-only. I have even edited and saved the images that WPV does not open. I am out of ideas, and searching for answer on the Web has resulted only in the same tired repitition of some flavor of "take ownership and reset permissions for the entire drive", which I have already done. And which is counter-indicated by the fact that only Windows Photo Viewer seems to have a problem. The one thing which is slightly unusual is that for normal files they are all on a second HDD mounted into C:, however for email attachments the temporary folder is C:\Temp\, which is directly on that drive.

  Read the article

• Homebrew large data cluster access for 2 user levels?

  - by Yegor

  The title probably makes little sense, so here is an example. I have a file hosting site, that serves a large amount of semi-randomly accessed files. The setup is as follows: High horsepower front-end +DB server that also does encoding for files that need encoding Fresh file server, which stores newly uploaded content, thats probably (and usually) rapidly accessible, which has 500GB of raided SSD storage, that can push over 3GBit of traffic. 3 cheap node servers, containing 2 x 750GB SATA drives in raid1, where files older than 2 weeks are archived, from the SSD server (mentioned above). Files on each server are accessed via subdomains (via modsec) in a straight forward fashion (server1.domain.com, server2.domain.com, etc) Where I have the problem is this. I introduced a "premium" service where people pay a small fee every month, and get ad-free, quick accesses to stuff on the site. Once they are logged in, they access same files via premium.server1.domain.com via a different modsec script, with a different pass phrase. That all works fine and dandy.... except the cheap node servers are all IO bound, so accessing the files on them via a different, unsaturated network makes no difference, since it cannot read off the drive fast enough. What would be a good way to make files on the site be accessible via 2 different network routes, 1 of which will be saturated (the "free network") while all other files are on an un-saturated "premium" network?

  Read the article

• Windows cannot open directory with too long name created by Linux

  - by Tim

  Hello! My laptop has two OSes: Windows 7 and Ubuntu 10.10. A partition of Windows 7 of format NTFS is mounted in Ubuntu. In Ubuntu, I created a directory under somehow deep path and with a long name for itself, specifically, the name for that directory is "a set of size-measurable subsets ie sigma algebra". Now in Windows, I cannot open the directory, which I guess is because of the name is too long, nor can I rename it. I was wondering if there is some way to access that directory under Windows? Better without changing the directory if possible, but will have to if necessary. Thanks and regards! Update: This is the output using "DIR /X" in cmd.exe, which does not shorten the directory name: F:\science\math\Foundations of mathematics\set theory\whether element of a set i s also a set\when element is set\when element sets are subsets of a universal se t\closed under some set operations\sigma algebra of sets>DIR /X Volume in drive F is Data Volume Serial Number is 0492-DD90 Directory of F:\science\math\Foundations of mathematics\set theory\whether elem ent of a set is also a set\when element is set\when element sets are subsets of a universal set\closed under some set operations\sigma algebra of sets 03/14/2011 10:43 AM <DIR> . 03/14/2011 10:43 AM <DIR> .. 03/08/2011 10:09 AM <DIR> a set of size-measurable sub sets ie sigma algebra 02/12/2011 04:08 AM <DIR> example 02/17/2011 12:30 PM <DIR> general 03/13/2011 02:28 PM <DIR> mapping from sigma algebra t o R or C i.e. measure 02/12/2011 04:10 AM <DIR> msbl mapping from general ms bl space to Borel msbl R or C 02/12/2011 04:10 AM 4,928 new file~ 03/14/2011 10:42 AM <DIR> temp 03/02/2011 10:58 AM <DIR> with Cartesian product of se ts 1 File(s) 4,928 bytes 9 Dir(s) 39,509,340,160 bytes free

  Read the article

• adding a custom user folder on Ubuntu

  - by Narcolapser

  Question: How do you add a custom folder to the collection of user folders that come with Ubuntu? Info: I just loaded my netbook with Ubuntu Desktop 10.04LTS (Desktop because it is an aspire one and the Apocalypse seems to follow when ever i try to install netbook remix onto it). It comes with standard folders like Documents, Music, Pictures, Downloads(though this one doesn't appear until you actually download something), Videos, etc etc. These are handly little folders because they have little symbols on them and are nicely located in my file browser. it is basically like the folder lay out the windows had in vista. I do a lot of little programing on this computer so i have a folder in which i keep all these single kb code files. Obviously named "Code" that I keep in my home folder. But I would really like to it over listed next to my other user folders. In summary, how do you add a folder to the listing on the file browser. And, if possible, how do you give it an icon? (I understand fully that I will probably have to make said Icon) those two things are what I'm seeking to do. ~n P.s. please correct me if I'm using the wrong name. I just guessed and called them "User Folders" because they were folders the user uses. made sense. but if they have another name like "libraries" please say so. Thanks

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Solution to easily share large files with non-tech-savvy users?

  - by Tim

  Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

  Read the article

• Solution to easily share large files with non-tech-savvy users?

  - by Tim

  Hey all, We've got a server setup at work which we'd like to use to exchange large files with known clients easily. We're looking into software to facilitate this, but somewhow typing "large file hosting" into Google gives questionable results.. ;) We've come up with the following requirements, and I hope any of you can points us in the direction of a solution that offers this functionality, or is malleable to our needs. Synchronization / revision management is of no concern, it's mostly single large (up to 1+ GB) file uploads & downloads we'll need. We'd like to make the downloads expire & be removed after a certain number of days / downloads, to limit the amount of cleanup we'd have to do. The data files exchanged sometimes hold confidential information, so the URLs generated should be random and not publicly visible. Our users are of the less technically savvy variety, so a simple webform would be best over a desktop client (because we also have to support a mix of operating systems). As for use of the system we'd either like to send out generated random URLs for them to upload their files, or have an easy way manage & expire users. Works on a linux (Ubuntu) server (so nothing .Net-related please) Does anyone know of software that fits the above criteria? We've already seen a few instances of this within the scientific community, but nothing we could use directly.. Best regards, Tim

  Read the article

• Organizing automatically Windows Files and Folders

  - by Kiquenet

  For Windows only, Organizing the eleventy-billion files you've got stuffed into folders on your hard drive is very "hard". For example, I have one folder on my computer that I save all web downloads to, regardless of file type, size or purpose. Many of the files are only temporary downloads, for instance setup files of applications that I test, demonstration videos that I watch once or documents that I want to read. Some files on the other hand are there to stay, and I used to move them out of the download folder manually in the past. Another files in folders in my computer: many source code, tests, programs, tools, ... I need tecnology for organize billion files. Which best tools for organize, sort, etc automatically your files-folders? Digital Janitor http://davidevitelaru.com/software/digital-janitor/ Belverede http://lifehacker.com/5510961/how-to-automatically-clean-and-organize-your-desktop-downloads-and-other-folders Download Mover http://www.neoteo.com/download-mover-reorganiza-tus-descargas-14188 File/Folder Date Organizer http://seedling.dcmembers.com/other/ffdorg.zip DropIt http://www.lupopensuite.com/db/dropit.htm Others issues about organization files, desktop, etc How to automate the process of organizing audio files on Windows Organizing My Windows Desktop What's a good way for organizing PDF documents on Windows? Folksonomy tagging for files What is your method of “folksonomy” tagging for files on your local machine?

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• Methods to transfer files from Windows server to linux server

  - by Raze2dust

  Hi, I need to transfer webserver-log-like-files containing periodically from windows production servers in the US to linux servers here in India. The files are ~4 MB in size each and I get about 1 file per minute. I can take about 5 mins lag between the files getting written in windows and them being available in the linux machines. I am a bit confused between the various options here as I am quite inexperienced in such design: I am thinking of writing a service in C#.NET which will periodically archive, compress and send them over to the linux machines. These files are pretty compressible. WinRAR can convert 32 MB of these files into a 1.2 MB archive. So that should solve the network transfer speed issue. But then how exactly do I transfer files to linux? I could mount linux drive on windows server using samba, or should I create an ftp server, or send the file serialized as a POST request. Which one would be good? Also, I have to minimize the load on the windows server. Mount the windows drive on linux instead. I could use the mount command or I could use samba here (What are the pros and cons of these two?). I can then write the compressing and copying part in linux itself. I don't trust the internet connection to be very stable, so there should be a good retry mechanism and failure protection too. What are the potential gotchas in these situations, and other points that I must be worried about? Thanks, Hari

  Read the article

• Allowing access to company files accross the internet

  - by Renaud Bompuis

  The premise I've been tasked with finding a solution to the following scenario: our main file server is a Linux machine. on the LAN, users simply access the files using SMB. each user has an account on the file server and his/her own access rights. user accounts are simple passwd/group security accounts, not NIS/LDAP. The problem We want to give users (or at least some of them, say if they belong to a particular group) the ability to access the files from the Internet while travelling. Ideally I'd like a seamless solution. Maybe something that allows the user to access a mapped drive would be ideal. A web-oriented solution is also good but it should present files in a way that is familiar to users, in an explorer-like fashion for instance. Security is a must of course, and users would be expected to log-in. The connection to the server should also be encrypted. Anyone has some pointers to neat solutions? Any experiences? Edit The client machines are Windows only.

  Read the article

• How to implement a virtual server running Ubuntu inside a fileserver in windows?

  - by user541445

  I work in a company that has some limitations regarding their budget. They need client/server aplication. I can code the aplication, I've made mini tests on primordial applications that work. The thing is that they only have fileservers, and the application they need must be concurrent compliant, so the database must be in their local network (Fileserver is the only choice). So far, I have explored almost any option available, starting with: Desktop databases. Access (We have a license)(But concurreny is just not effective, besides it's a windows software, yuck). Sqlite (Nice, but since the information they manage is a lot, I've performed some concurrency tests with INSERTs and doing SELECTS at the same time). It fails, somehow it just stops inserting. Open office Base (I dismember a base office only to see that it was a file mode HSQLDB). I've tried, not concurrent at all. Etc (You name the Open source Desktop Database manager, and yes, I've tried that one.) Server databases Call me a stubborn person, but reading some server databases documentation say that their databases will work in a file mode. I've tried a lot of products. Postgres, MySQL, FireBird, H2, Derby, Oracle Express, IBM DB2 Express, etc. So, I really need a hand here, I've been doing this install/delete/depression thing with a lot of databases for 3 weeks, until I got with a crazy idea and I just came here to express it. So, my question comes down to this: Installing a light virtual OS software like Virtual PC and then installing in there a Server OS like an Ubuntu server inside that virtual software will work? Will it work 24/7 or when I close the virtual pc software? Will this work in a fileserver? Any suggestion, answer, critic to the place I work, crazy new concurrent database that will work in fileserver will be most than welcome.

  Read the article

• How can I configure Samba to share (read/write) any folder with root permissions?

  - by Mike Toews

  I have a CentOS 5 VirtualBox guest on a Win7x64 host. I am attempting to setup a read/write share a directory owned by root with my Windows host using Samba, but I'm having no luck after running around in circles. To simplify matters, I've disabled my Firewall (/etc/init.d/iptables stop). As security and permissions are irrelevant for this purpose, I'd rather not have to set up another unix user/group/password. Here is the output from testparm Load smb config files from /etc/samba/smb.conf rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) Processing section "[Guest Share]" Loaded services file OK. Server role: ROLE_STANDALONE and the source of /etc/samba/smb.conf: [global] workgroup = WRKGRP netbios name = SMBSERVER security = SHARE load printers = No [Guest Share] comment = Guest access share path = /root/src read only = No guest ok = Yes Running /etc/init.d/smb restart shows an OK status. However, on my Windows host, I can only see the share folder on the guest \\IPv4, but I cannot go into "Guest Share": "The network name cannot be found" error message is a common error, with a likely cause: The user you are trying to access the share with does not have sufficient permissions to access the path for the share. Both read (r) and access (x) should be possible. Am I trying to use root as a passwordless Samba guest? I'd like to, is it possible? How can I configure Samba to share (read/write) any folder with root permissions?

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• Microsoft Word 2008 on the Mac sometimes "Disappears" documents, really.

  - by Ross Charette

  This happens in a computer lab environment, has happened at least 3 times. We are running Microsoft Office 2008 for mac on Leopard, everything is updated. Our user's home directories are on a network drive, but the /Library/Cache folder is running locally. Typically a student will have a Word file that they have been working on, it's been saved before they even logged onto the computer that day. They log on, open the document, click the save icon (not go to File Save), sometimes even save multiple times, then close Word. The document is now gone. It's not hidden, there are no autosaves or anything in the Cache folder. Definitely not in the trash or trashes folder. It can't find it when you click on it in 'recent documents'. Searching meticulously though every folder in their home drive turns up nothing. They look using Finder, I look ssh'd as root into their home using ls -la. I look for similar files in case they renamed it by mistake. It's gone. Disappeared. Vaporized. It's happened to at least 3 different users in the past year. Much whining. Any idea?

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• 3 Server, is this a cluster scenario?

  - by HornedBeast

  Hello, At the moment I have one Ubuntu server, 9.10, running with a simple Samba share, a mail server, DNS server and DHCP server. Mostly its just there for file sharing and email server. I also have 2 other servers that are exactly the same hardware and spec as the first, which have an rsync set up to retrieve the shared folders and backs them up. However, if the first server goes down, all of our shares disappear along with our mail and the system must be rebuilt. Also I tend to find if people are downloading a large amount from the file server, no-one can access there emails - especially in the morning when everyone is signing in at once. Would it be more beneficial for me to have all 3 servers, all running the same services, doing the same thing with some sort of cluster with load balancing? In short, how can I get the best out of my 3 hardware servers? I'm not really sure where to begin looking, or how to go about such a setup where 3 servers are all identical, but perhaps one acts as the main load balancer?? If someone can point me in the right direction, or if this simply sounds like one of those Enterprise Cloud's that is now a default setup in Ubuntu Server 9.10+, then I'll go down that route. Cheers in advance. Andy

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >