Search Results

Search found 9471 results on 379 pages for 'mac'.

Page 211/379 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • Who moved this PC here aka Locate which port on switch a PC is plugged into

    - by ggonsalv
    The catch is you have no SNMP access, not even public. The end vision is locate a PC in building easily even if PC's are moved around. The MAC address of the PC is known and the software would run as client on each desktop, reporting back which port the PC was plugged into. Well from a programmer perspective, my network skills are not the best. Yes I could use SNMP, download the MAC port table, load it into SQL, match it to the PC name. Seems alot of work. Lets say I ping a single point from the PC. Would the echo have some thing unique for each device on the same switch? All I need to identify some thing unique for each PC plugged into each port. If the PC was moved from location A to a different location then the unique response would change.

    Read the article

  • What are the differences between MBR vs GPT vs any other partition scheme?

    - by Safran Ali
    Can anyone tell me what the main differences between i.e. MBR vs GPT or any other partition scheme are? Why would one choose one over the other? I am not an expert but from new release of Mac OS X which includes a feature called Time Machine, which I find highly useful. GPT is the requirement for Mac OS X Lion ... so on this basis I would say that GPT is more useful than MBR. What other partition schemes are there and which one should be used in which situation?

    Read the article

  • Snow Leopard directories after hard disk crash and restore from Migrate Utility

    - by ennuikiller
    My hard drive on my macbook pro crashed the other day and I got a replacement from Apple with a vanilla snow leopard install. Upon returning home I used the Migration Utility to restore my previous data and configuration. So far, so good! Everything looks and works exactly the same as before the crash. However, I noticed these 2 directories that are taking up quite a bit of space: /Developer (from old Mac) /opt (from old Mac) The question is can I safely remove these? As I said, my macbook pro appears to be restored completely to before the hard drive crash. I can run all my apps and all my files appear to be intact. Therefore it seems the system is not using these directories. Also because of their odd names it doesn't seem that os x is using them for any purpose. Thanks in advance for any help!

    Read the article

  • How can I prevent the warning No xauth data; using fake authentication data for X11 forwarding?

    - by Sorin Sbarnea
    Every time I initiate an ssh connection from my Mac to a Linux (Debian) I do get this warning: No xauth data; using fake authentication data for X11 forwarding. This also happens for tools that are using ssh, like git or mercurial. I just want to make a local change to my system in order to prevent this from appearing. Note: I do have X11 server (XQuartz 2.7.3 (xorg-server 1.12.4)) on my Mac OS X (10.8.1) and it is working properly, I can successfully start clock locally or remotely.

    Read the article

  • Snow Leopard: Optimization

    - by Shyam
    Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

    Read the article

  • Trouble upgrading OS X, because HD doesn't use GUID Partition Table Scheme

    - by Erik Vold
    So I have a MacBook with Mac OS X 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

    Read the article

  • Convert audio file to FLAC with ffmpeg?

    - by elpsk
    can I convert one of this format to compatible 16000.0 Sample Rate FLAC file? kAudioFormatLinearPCM = 'lpcm', kAudioFormatAppleIMA4 = 'ima4', kAudioFormatMPEG4AAC = 'aac ', kAudioFormatMACE3 = 'MAC3', kAudioFormatMACE6 = 'MAC6', kAudioFormatULaw = 'ulaw', kAudioFormatALaw = 'alaw', kAudioFormatMPEGLayer1 = '.mp1', kAudioFormatMPEGLayer2 = '.mp2', kAudioFormatMPEGLayer3 = '.mp3', kAudioFormatAppleLossless = 'alac' I tried using ffmpeg ffmpeg -i audio.xxx -acodec flac audio.flac but result is FFmpeg version CVS, Copyright (c) 2000-2004 Fabrice Bellard Mac OSX universal build for ffmpegX configuration: --enable-memalign-hack --enable-mp3lame --enable-gpl --disable-vhook --disable-ffplay --disable-ffserver --enable-a52 --enable-xvid --enable-faac --enable-faad --enable-amr_nb --enable-amr_wb --enable-pthreads --enable-x264 libavutil version: 49.0.0 libavcodec version: 51.9.0 libavformat version: 50.4.0 built on Apr 15 2006 04:58:19, gcc: 4.0.1 (Apple Computer, Inc. build 5250) Input #0, wsaud, from 'audio.alac': Duration: 00:00:03.8, start: 0.000000, bitrate: 199 kb/s Stream #0.0: Audio: adpcm_ima_ws, 24931 Hz, stereo, 199 kb/s Unable for find a suitable output format for 'audio.flac' I also installed flac codec for mac, but nothing... I tried also use convtoflac.sh (from http://legroom.net/software/convtoflac) but result is similar. Any idea to convert in flac?

    Read the article

  • GoogleTest C++ Framework Incompatible With XCode 4.5.2 and OSX 10.8.2

    - by eb80
    I am trying to follow the instructions mentioned here for setting up Google's C++ framework in XCode Version 4.5.2 (4G2008a). First, I got "The run destination My Mac 64-bit is not valid for Running the scheme 'gtest-framework'". The answers here Xcode 4 - The selected run destination is not valid for this action are not working for me. I was able to change the build SDK following the instructions here Unable to build using Xcode 4 - The selected run destination is not valid for this action, except this resulted in many build failures such as "Unsupported compiler '4.0' selected for architecture 'x86_64'" and "Unsupported compiler '4.0' selected for architecture 'i386'" I've changed nothing out of the box, so this is very frustrating that I cannot seem to get this to build. Details of Machine: 64bit Mac OSX 10.8.2 Build 12C3006 Details of XCode: Version 4.5.2 (4G2008a)

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • Laptop Suggestions and Alternatives [closed]

    - by Pennf0lio
    Hi, I need some suggestions and alternatives in buying laptops. Me and my Girlfriend are planning to buy laptops. Her budget is $600 and mine is $850. We both love apple products, because of it's elegant design and yet powerful. But we can't yet afford mac laptops.. so we are looking for alternatives. One we see is The Stylish Sony E-Series (white version) see it here. To give you an Idea, Software she frequently use are Photoshop, MS Office and firefox. Mine is Adobe CS4, Cinema4d, MS Office and firefox. We are looking for light, slick and clean interface of a laptop (very close to mac notebooks). Thanks!

    Read the article

  • Cisco IOS ACL types

    - by cjavapro
    The built in command help list displays access list types based on which range. router1(config)#access-list ? <1-99> IP standard access list <100-199> IP extended access list <1100-1199> Extended 48-bit MAC address access list <1300-1999> IP standard access list (expanded range) <200-299> Protocol type-code access list <2000-2699> IP extended access list (expanded range) <700-799> 48-bit MAC address access list dynamic-extended Extend the dynamic ACL absolute timer rate-limit Simple rate-limit specific access list router1(config)# What are each of the types? Can multiple types of ACLs be applied to a given interface?

    Read the article

  • How do I delete a route in OS X 10.5

    - by authormichael-olsen-craig
    I somehow configured my Mac to route all requests for a particular IP Name (sample.com) to the loopback address (127.0.0.1). Now I'm trying to remove this, but can't determine where to do it. There is no entry for it under /etc/hosts. The routing table shows that it is mapping the IP Name to the IP address of the Mac. Routing table output below: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.2.1 UGSc 4 1 en0 127 sample.com UCS 0 0 lo0 sample.com sample.com UH 1 7093 lo0 169.254 link#4 UCS 0 0 en0 192.168.2 link#4 UCS 6 0 en0 192.168.2.1 0:11:22:22:3f:fa UHLW 20 55565 en0 1070 192.168.2.15 tsema.org UHS 0 9 lo0 192.168.2.255 link#4 UHLWb 4 84777 en0 Any help would be greatly appreciated!

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

  • How to connect to my Local Host?

    - by Mazen Ayman
    I have Mac OSx (mountain Lion), Windows 7, Fedora 17 installed on my Macbook pro, and I can't connect to the local host on any of them, it always tells me can't connect. I'm learning mysql and from the tutorials, I guess I have to be connected to my localhost to create databases and stuff, but do I have to install something first for it to work? P.S. - for mac, I don't have the option "web sharing" to enable in the system preferences. - for windows, I tried to enable IIS, but it gives me an error ... I also tried to work it out using the cmd.exe but it just doesn't work as well. - for fedora, I'm new to it, but I just installed and I have no idea why it's not working.

    Read the article

  • VPN and Bonjour conflicting

    - by JW.
    Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

    Read the article

  • Any way to know if two ip address points to the same machine?

    - by Vivek V K
    Is there anyway to find if two different IP address in two different network actually points to the same physical device? I need it in Linux. Edit - I have the same server(a raspberry pi) connected via 2 intranets to my client. I don't know the IP address of the server as it is DHCP. The crude way to do is to reach the raspberry pi from one intranet and check with ifconfig to find the ipadress of the machine in the other Intranet. I want to know if there is any other way I can do it? I know the mac address of the machine.But I don't know how do I find the Ipadress based on the mac address.

    Read the article

  • Bridge virtual machines out WLAN interface

    - by Thomas
    It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

    Read the article

  • What is the best OS for a server hosting a simple Ruby on Rails based pastebin

    - by Koning Baard XIV
    I have created a simple pastebin in Ruby on Rails and Python. I want to host it in an intranet and it will have like about 1000 users. I want to use one Apache server with a cluster of Mongrel servers. The server itself is a 2 GHz Intel Centrino with 2 GB RAM. What do you think is the best OS to host this? I thought about Damn Small Linux or a custom LFS system. Ubuntu servers come with loads of stuff I don't need. Maybe there are some better OSes? It must be capable of: Running Apache Running Ruby Running Python Running Mongrel with Ruby on Rails SSH Can anyone reccomend me one? Thanks. PS: I am not going to run Windows Server or Mac OS X Server (Mac's are expensive).

    Read the article

  • Syncing contacts to iOS device with Exchange

    - by flackend
    I set up a Microsoft Exchange account on my iOS device to sync my Gmail contacts. But Microsoft Exchange is ignoring phone numbers that are labeled as 'iPhone' or 'main'. For example, John Smith: On Mac and Gmail: John Smith main: 123-334-1212 home: 123-330-1002 work: 123-330-8211 iPhone: 123-778-5556 On iOS device (via Exchange sync): John Smith home: 123-330-1002 work: 123-330-8211 I'd like to sync my contacts from my Mac to iCloud and Gmail, but you can't do both: Is there a solution to sync iOS and Gmail contacts without using Exchange? Thanks for any help!

    Read the article

  • OpenBSD in a virtual box as a firewall

    - by Ali
    Is there any merit in installing a virtual machine with OpenBSD and pf (or any other simple and secure OS + iptable) on a mac laptop and routing all the traffic through that machine? I read a similar set up for corporate laptops running windows (I thing I read this in BSD magazine). They claim that Windows machines are too hard to secure and if you are taking them to the wild (public wireless, hotels, ...) you'd better but a secure OS in between! If you think this is a good idea, how you route all the traffic on a mac through the virtual machine and prevent any application or service to go directly? I am not sure if just setting the gateway will do that, what about DNS? you don't want anybody to fool you with DNS cache poisoning or similar attacks either.

    Read the article

  • Simulating an UNC path with a leading dot

    - by Uwe Keim
    Being a C# .NET Windows Forms developer, some customers are running our applications on an Apple OS X Mac inside a Parallels virtual machine. Parallels presents host folders to the guest Windows as UNC paths with a leading dot like \\.psf\Home\Some\More\Folders Now an application of us cannot handle the leading dot correctly when accessing files from these kind of shares ("Invalid URI, cannot analyze host name" exception). I want to debug and fix this issue, unfortunately I do have no Mac and Parallels around here to test it. My question is: Is there a way to "simulate" this kind of share on a normal Windows server or client so that I'll be able to debug my application with Visual Studio? What I tried so far: I already tried to edit my HOSTS file to contain an entry like # ... 127.0.0.1 .psf # ... but Windows just seems to not recognize the share at all.

    Read the article

  • Can't find a Windows Explorer alternative that has FULL-TREE View

    - by samJL
    I cannot find a Windows Explorer alternative that has full-tree view functionality like Path Finder on the Mac This is the type of view I am looking for (screenshot of Path Finder on Mac): By full-tree I mean: A tree view that includes files in addition to folders, and can be operated as its own pane-- not as a shared pane or attached pane which is characteristic of Q-Dir. Q-Dir and most others simply stick a folder tree pane on to a file list pane, which is not as useful (think Ruby on Rails application or anything with MVC-- I want to be able to pop open folders in the tree and have them stay open as I work between them). I have tried xplorer2 XYplorer Nexus File Free Commander muCommander CubicExplorer Double Commander Q-Dir Explorer++ Unreal Commander wxCommander Power Desk Directory Opus Has anyone seen a Windows app that has a full-tree view? I can't believe such a simple feature is so hard to find Thanks

    Read the article

  • How can I get 2560 * 1600 on Win 7 ? MacBook Pro 17 + Dell 30 inch 3008 WFP + Fusion 3

    - by Tarek Demiati
    I run VM Ware Fusion 3 on a Mac Book Pro 17 hooked to a Dell 30 inch screen I CAN manage to get a Resolution of 2560 * 1600 on Mac OS X(MacBook Pro), but can't on Win 7 (on the exact same MacBook Pro) The highest resolution I can get on MS Win 7 is 2048 * 1536 (and I want to be able to set it to 2560 * 1600 to fully enjoy the real estate of my 30 inch screen!) I have searched the KB, and found an article which mentionned that I should add the following lines in the vmx file (which I did) The lines are the very bottom of the vmx file svga.maxWidth = "2560" svga.maxHeight = "1600" svga.vramSize = "16384000" KB Article : http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003&sliceId=1&docTypeID=DT_KB_1_1&dialogID=63746028&stateId=0%200%2066741566 I did the manipulation describe in the KB above however, I rebooted several times, but I still can't get the correct resolution to show in Windows

    Read the article

  • Apple RAID configuration vs Hardware RAID

    - by James Hill
    I am researching external HDD's capable or RAID 1 to store a large amount of video content during overseas filming. After filming, the content will be brought back to the office and offloaded onto our storage server. After doing some research, I've found that I can buy an external drive with a built in RAID controller, or I can buy an external drive, with 2 HDD's, that I can configure in a RAID 1 array using the OS. RAID 1 is what we're looking for. I've done some reading on software RAID vs. hardware RAID, but the resources I've found don't discuss performance as it relates to video content or what happens to a software RAID when the computer dies. Question 1: Will the hardware RAID be more performant when dealing with large video files? Question 2: If the mac dies, does my RAID die with it (will my data be accessible on another mac)?

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >