Search Results

Search found 5287 results on 212 pages for 'physical computing'.

Page 211/212 | < Previous Page | 207 208 209 210 211 212  | Next Page >

• Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  This article is a continuation of my previous entry where I explained how OIF/IdP leverages OAM to authenticate users at runtime: OIF/IdP internally forwards the user to OAM and indicates which Authentication Scheme should be used to challenge the user if needed OAM determine if the user should be challenged (user already authenticated, session timed out or not, session authentication level equal or higher than the level of the authentication scheme specified by OIF/IdP…) After identifying the user, OAM internally forwards the user back to OIF/IdP OIF/IdP can resume its operation In this article, I will discuss how OIF/IdP can be configured to map Federation Authentication Methods to OAM Authentication Schemes: When processing an Authn Request, where the SP requests a specific Federation Authentication Method with which the user should be challenged When sending an Assertion, where OIF/IdP sets the Federation Authentication Method in the Assertion Enjoy the reading! Overview The various Federation protocols support mechanisms allowing the partners to exchange information on: How the user should be challenged, when the SP/RP makes a request How the user was challenged, when the IdP/OP issues an SSO response When a remote SP partner redirects the user to OIF/IdP for Federation SSO, the message might contain data requesting how the user should be challenged by the IdP: this is treated as the Requested Federation Authentication Method. OIF/IdP will need to map that Requested Federation Authentication Method to a local Authentication Scheme, and then invoke OAM for user authentication/challenge with the mapped Authentication Scheme. OAM would authenticate the user if necessary with the scheme specified by OIF/IdP. Similarly, when an IdP issues an SSO response, most of the time it will need to include an identifier representing how the user was challenged: this is treated as the Federation Authentication Method. When OIF/IdP issues an Assertion, it will evaluate the Authentication Scheme with which OAM identified the user: If the Authentication Scheme can be mapped to a Federation Authentication Method, then OIF/IdP will use the result of that mapping in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled If the Authentication Scheme cannot be mapped, then OIF/IdP will set the Federation Authentication Method as the Authentication Scheme name in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled Mappings In OIF/IdP, the mapping between Federation Authentication Methods and Authentication Schemes has the following rules: One Federation Authentication Method can be mapped to several Authentication Schemes In a Federation Authentication Method <-> Authentication Schemes mapping, a single Authentication Scheme is marked as the default scheme that will be used to authenticate a user, if the SP/RP partner requests the user to be authenticated via a specific Federation Authentication Method An Authentication Scheme can be mapped to a single Federation Authentication Method Let’s examine the following example and the various use cases, based on the SAML 2.0 protocol: Mappings defined as: urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapped to LDAPScheme, marked as the default scheme used for authentication BasicScheme urn:oasis:names:tc:SAML:2.0:ac:classes:X509 mapped to X509Scheme, marked as the default scheme used for authentication Use cases: SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:X509 as the RequestedAuthnContext: OIF/IdP will authenticate the use with X509Scheme since it is the default scheme mapped for that method. SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the RequestedAuthnContext: OIF/IdP will authenticate the use with LDAPScheme since it is the default scheme mapped for that method, not the BasicScheme SP did not request any specific methods, and user was authenticated with BasisScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with LDAPScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with BasisSessionlessScheme: OIF/IdP will issue an Assertion with BasisSessionlessScheme as the FederationAuthenticationMethod, since that scheme could not be mapped to any Federation Authentication Method (in this case, the administrator would need to correct that and create a mapping) Configuration Mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. Authentication Schemes As discussed in the previous article, during Federation SSO, OIF/IdP will internally forward the user to OAM for authentication/verification and specify which Authentication Scheme to use. OAM will determine if a user needs to be challenged: If the user is not authenticated yet If the user is authenticated but the session timed out If the user is authenticated, but the authentication scheme level of the original authentication is lower than the level of the authentication scheme requested by OIF/IdP So even though an SP requests a specific Federation Authentication Method to be used to challenge the user, if that method is mapped to an Authentication Scheme and that at runtime OAM deems that the user does not need to be challenged with that scheme (because the user is already authenticated, session did not time out, and the session authn level is equal or higher than the one for the specified Authentication Scheme), the flow won’t result in a challenge operation. Protocols SAML 2.0 The SAML 2.0 specifications define the following Federation Authentication Methods for SAML 2.0 flows: urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocol urn:oasis:names:tc:SAML:2.0:ac:classes:Telephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:PersonalTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:PreviousSession urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:Smartcard urn:oasis:names:tc:SAML:2.0:ac:classes:Password urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocolPassword urn:oasis:names:tc:SAML:2.0:ac:classes:X509 urn:oasis:names:tc:SAML:2.0:ac:classes:TLSClient urn:oasis:names:tc:SAML:2.0:ac:classes:PGP urn:oasis:names:tc:SAML:2.0:ac:classes:SPKI urn:oasis:names:tc:SAML:2.0:ac:classes:XMLDSig urn:oasis:names:tc:SAML:2.0:ac:classes:SoftwarePKI urn:oasis:names:tc:SAML:2.0:ac:classes:Kerberos urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport urn:oasis:names:tc:SAML:2.0:ac:classes:SecureRemotePassword urn:oasis:names:tc:SAML:2.0:ac:classes:NomadTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:AuthenticatedTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:SmartcardPKI urn:oasis:names:tc:SAML:2.0:ac:classes:TimeSyncToken Out of the box, OIF/IdP has the following mappings for the SAML 2.0 protocol: Only urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml20-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 2.0 An example of an AuthnRequest message sent by an SP to an IdP with the SP requesting a specific Federation Authentication Method to be used to challenge the user would be: <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://idp.com/oamfed/idp/samlv20" ID="id-8bWn-A9o4aoMl3Nhx1DuPOOjawc-" IssueInstant="2014-03-21T20:51:11Z" Version="2.0">  <saml:Issuer ...>https://acme.com/sp</saml:Issuer>  <samlp:NameIDPolicy AllowCreate="false" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>  <samlp:RequestedAuthnContext Comparison="minimum">    <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">      urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef>  </samlp:RequestedAuthnContext></samlp:AuthnRequest> An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                    urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> An administrator would be able to specify a mapping between a SAML 2.0 Federation Authentication Method and one or more OAM Authentication Schemes SAML 1.1 The SAML 1.1 specifications define the following Federation Authentication Methods for SAML 1.1 flows: urn:oasis:names:tc:SAML:1.0:am:unspecified urn:oasis:names:tc:SAML:1.0:am:HardwareToken urn:oasis:names:tc:SAML:1.0:am:password urn:oasis:names:tc:SAML:1.0:am:X509-PKI urn:ietf:rfc:2246 urn:oasis:names:tc:SAML:1.0:am:PGP urn:oasis:names:tc:SAML:1.0:am:SPKI urn:ietf:rfc:3075 urn:oasis:names:tc:SAML:1.0:am:XKMS urn:ietf:rfc:1510 urn:ietf:rfc:2945 Out of the box, OIF/IdP has the following mappings for the SAML 1.1 protocol: Only urn:oasis:names:tc:SAML:1.0:am:password is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml11-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 1.1 An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameID ...>[email protected]</saml:NameID>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Note: SAML 1.1 does not define an AuthnRequest message. An administrator would be able to specify a mapping between a SAML 1.1 Federation Authentication Method and one or more OAM Authentication Schemes OpenID 2.0 The OpenID 2.0 PAPE specifications define the following Federation Authentication Methods for OpenID 2.0 flows: http://schemas.openid.net/pape/policies/2007/06/phishing-resistant http://schemas.openid.net/pape/policies/2007/06/multi-factor http://schemas.openid.net/pape/policies/2007/06/multi-factor-physical Out of the box, OIF/IdP does not define any mappings for the OpenID 2.0 Federation Authentication Methods. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. An example of an OpenID 2.0 Request message sent by an SP/RP to an IdP/OP would be: https://idp.com/openid?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=checkid_setup&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.realm=https%3A%2F%2Facme.com%2Fopenid&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_request&openid.ax.type.attr0=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.if_available=attr0&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.max_auth_age=0 An example of an Open ID 2.0 SSO Response issued by an IdP/OP would be: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will provide examples on how to configure OIF/IdP for the various protocols, to map OAM Authentication Schemes to Federation Authentication Methods.Cheers,Damien Carru

  Read the article

• help with fixing fwts errors log

  - by jasmines

  Here is an extract of results.log: MTRR validation. Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. ==================================================================================================== Test 1 of 1: Kernel log error check. Kernel message: [ 0.208079] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ADVICE: This is not exactly a failure mode but a warning from the kernel. The _OSI() method has implemented a match to the 'Linux' query in the DSDT and this is redundant because the ACPI driver matches onto the Windows _OSI strings by default. FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1, HIGH Kernel message: [ 3.512783] ACPI Error : Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) ADVICE: This is a bug picked up by the kernel, but as yet, the firmware test suite has no diagnostic advice for this particular problem. Found 1 unique errors in kernel log. ==================================================================================================== Check if system is using latest microcode. ---------------------------------------------------------------------------------------------------- Cannot read microcode file /usr/share/misc/intel-microcode.dat. Aborted test, initialisation failed. ==================================================================================================== MSR register tests. FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). MSR CPU 0 -> 0xf7bb9c40 vs CPU 1 -> 0xf7bc7c40 FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). MSR CPU 0 -> 0x850088 vs CPU 1 -> 0x850089 ==================================================================================================== Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check firmware settings MaxReadReq for PCI Express devices. MaxReadReq for pci://00:00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) is low (128) [Audio device]. MaxReadReq for pci://00:02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection is low (128) [Network controller]. FAILED [LOW] LowMaxReadReq: Test 1, 2 devices have low MaxReadReq settings. Firmware may have configured these too low. ADVICE: The MaxReadRequest size is set too low and will affect performance. It will provide excellent bus sharing at the cost of bus data transfer rates. Although not a critical issue, it may be worth considering setting the MaxReadRequest size to 256 or 512 to increase throughput on the PCI Express bus. Some drivers (for example the Brocade Fibre Channel driver) allow one to override the firmware settings. Where possible, this BIOS configuration setting is worth increasing it a little more for better performance at a small reduction of bus sharing. ==================================================================================================== PCIe ASPM check. ---------------------------------------------------------------------------------------------------- Test 1 of 2: PCIe ASPM ACPI test. PCIE ASPM is not controlled by Linux kernel. ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS configured. It can be intentional because hardware vendors identified some capability bugs between the motherboard and the add-on cards. Test 2 of 2: PCIe ASPM registers test. WARNING: Test 2, RP 00h:1Ch.01h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.01h L1 not enabled. WARNING: Test 2, Device 02h:00h.00h L0s not enabled. WARNING: Test 2, Device 02h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. WARNING: Test 2, RP 00h:1Ch.05h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.05h L1 not enabled. WARNING: Test 2, Device 85h:00h.00h L0s not enabled. WARNING: Test 2, Device 85h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. ==================================================================================================== Extract and analyse Windows Management Instrumentation (WMI). Test 1 of 2: Check Windows Management Instrumentation in DSDT Found WMI Method WMAA with GUID: 5FB7F034-2C63-45E9-BE91-3D44E2C707E4, Instance 0x01 Found WMI Event, Notifier ID: 0x80, GUID: 95F24279-4D7B-4334-9387-ACCDC67EF61C, Instance 0x01 PASSED: Test 1, GUID 95F24279-4D7B-4334-9387-ACCDC67EF61C is handled by driver hp-wmi (Vendor: HP). Found WMI Event, Notifier ID: 0xa0, GUID: 2B814318-4BE8-4707-9D84-A190A859B5D0, Instance 0x01 FAILED [MEDIUM] WMIUnknownGUID: Test 1, GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. ADVICE: A WMI driver probably needs to be written for this event. It can checked for using: wmi_has_guid("2B814318-4BE8-4707-9D84-A190A859B5D0"). One can install a notify handler using wmi_install_notify_handler("2B814318-4BE8-4707-9D84-A190A859B5D0", handler, NULL). http://lwn.net/Articles/391230 describes how to write an appropriate driver. Found WMI Object, Object ID AB, GUID: 05901221-D566-11D1-B2F0-00A0C9062910, Instance 0x01, Flags: 00 Found WMI Method WMBA with GUID: 1F4C91EB-DC5C-460B-951D-C7CB9B4B8D5E, Instance 0x01 Found WMI Object, Object ID BC, GUID: 2D114B49-2DFB-4130-B8FE-4A3C09E75133, Instance 0x7f, Flags: 00 Found WMI Object, Object ID BD, GUID: 988D08E3-68F4-4C35-AF3E-6A1B8106F83C, Instance 0x19, Flags: 00 Found WMI Object, Object ID BE, GUID: 14EA9746-CE1F-4098-A0E0-7045CB4DA745, Instance 0x01, Flags: 00 Found WMI Object, Object ID BF, GUID: 322F2028-0F84-4901-988E-015176049E2D, Instance 0x01, Flags: 00 Found WMI Object, Object ID BG, GUID: 8232DE3D-663D-4327-A8F4-E293ADB9BF05, Instance 0x01, Flags: 00 Found WMI Object, Object ID BH, GUID: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Object, Object ID BI, GUID: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Method WMAC with GUID: 7391A661-223A-47DB-A77A-7BE84C60822D, Instance 0x01 Found WMI Object, Object ID BJ, GUID: DF4E63B6-3BBC-4858-9737-C74F82F821F3, Instance 0x05, Flags: 00 ==================================================================================================== Disassemble DSDT to check for _OSI("Linux"). ---------------------------------------------------------------------------------------------------- Test 1 of 1: Disassemble DSDT to check for _OSI("Linux"). This is not strictly a failure mode, it just alerts one that this has been defined in the DSDT and probably should be avoided since the Linux ACPI driver matches onto the Windows _OSI strings { If (_OSI ("Linux")) { Store (0x03E8, OSYS) } If (_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (LAnd (MPEN, LEqual (OSYS, 0x07D1))) { TRAP (0x01, 0x48) } TRAP (0x03, 0x35) } WARNING: Test 1, DSDT implements a deprecated _OSI("Linux") test. ==================================================================================================== 0 passed, 0 failed, 1 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== ACPI DSDT Method Semantic Tests. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP Failed to install global event handler. Test 22 of 93: Check _PSR (Power Source). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 22, Detected an infinite loop when evaluating method '\_SB_.AC__._PSR'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 22, \_SB_.AC__._PSR correctly acquired and released locks 16 times. Test 35 of 93: Check _TMP (Thermal Zone Current Temp). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.DTSZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.DTSZ._TMP correctly acquired and released locks 14 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.CPUZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.CPUZ._TMP correctly acquired and released locks 10 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.SKNZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.SKNZ._TMP correctly acquired and released locks 10 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000b4c (289.2 degrees K) PASSED: Test 35, \_TZ_.BATZ._TMP correctly acquired and released locks 9 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000aac (273.2 degrees K) PASSED: Test 35, \_TZ_.FDTZ._TMP correctly acquired and released locks 7 times. Test 46 of 93: Check _DIS (Disable). FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 61 of 93: Check _WAK (System Wake). Test _WAK(1) System Wake, State S1. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(2) System Wake, State S2. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(3) System Wake, State S3. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(4) System Wake, State S4. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(5) System Wake, State S5. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test 87 of 93: Check _BCL (Query List of Brightness Control Levels Supported). Package has 2 elements: 00: INTEGER: 0x00000000 01: INTEGER: 0x00000000 FAILED [MEDIUM] Method_BCLElementCount: Test 87, Method _BCL should return a package of more than 2 integers, got just 2. Test 88 of 93: Check _BCM (Set Brightness Level). ACPICA Exception AE_AML_PACKAGE_LIMIT during execution of method _BCM FAILED [CRITICAL] AEAMLPackgeLimit: Test 88, Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. ==================================================================================================== ACPI table settings sanity checks. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check ACPI tables. PASSED: Test 1, Table APIC passed. Table ECDT not present to check. FAILED [MEDIUM] FADT32And64BothDefined: Test 1, FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Section 5.2.9 of the ACPI specification states that if the FIRMWARE_CONTROL is non-zero then X_FIRMWARE_CONTROL must be set to zero. ADVICE: The FADT FIRMWARE_CTRL is a 32 bit pointer that points to the physical memory address of the Firmware ACPI Control Structure (FACS). There is also an extended 64 bit version of this, the X_FIRMWARE_CTRL pointer that also can point to the FACS. Section 5.2.9 of the ACPI specification states that if the X_FIRMWARE_CTRL field contains a non zero value then the FIRMWARE_CTRL field *must* be zero. This error is also detected by the Linux kernel. If FIRMWARE_CTRL and X_FIRMWARE_CTRL are defined, then the kernel just uses the 64 bit version of the pointer. PASSED: Test 1, Table HPET passed. PASSED: Test 1, Table MCFG passed. PASSED: Test 1, Table RSDT passed. PASSED: Test 1, Table RSDP passed. Table SBST not present to check. PASSED: Test 1, Table XSDT passed. ==================================================================================================== Re-assemble DSDT and find syntax errors and warnings. ---------------------------------------------------------------------------------------------------- Test 1 of 2: Disassemble and reassemble DSDT FAILED [HIGH] AMLAssemblerError4043: Test 1, Assembler error in line 2261 Line | AML source ---------------------------------------------------------------------------------------------------- 02258| 0x00000000, // Range Minimum 02259| 0xFEDFFFFF, // Range Maximum 02260| 0x00000000, // Translation Offset 02261| 0x00000000, // Length | ^ | error 4043: Invalid combination of Length and Min/Max fixed flags 02262| ,, _Y0E, AddressRangeMemory, TypeStatic) 02263| DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 02264| 0x00000000, // Granularity ==================================================================================================== ADVICE: (for error #4043): This occurs if the length is zero and just one of the resource MIF/MAF flags are set, or the length is non-zero and resource MIF/MAF flags are both set. These are illegal combinations and need to be fixed. See section 6.4.3.5 Address Space Resource Descriptors of version 4.0a of the ACPI specification for more details. FAILED [HIGH] AMLAssemblerError4050: Test 1, Assembler error in line 2268 Line | AML source ---------------------------------------------------------------------------------------------------- 02265| 0xFEE01000, // Range Minimum 02266| 0xFFFFFFFF, // Range Maximum 02267| 0x00000000, // Translation Offset 02268| 0x011FEFFF, // Length | ^ | error 4050: Length is not equal to fixed Min/Max window 02269| ,, , AddressRangeMemory, TypeStatic) 02270| }) 02271| Method (_CRS, 0, Serialized) ==================================================================================================== ADVICE: (for error #4050): The minimum address is greater than the maximum address. This is illegal. FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 8885 Line | AML source ---------------------------------------------------------------------------------------------------- 08882| Method (_DIS, 0, NotSerialized) 08883| { 08884| DSOD (0x02) 08885| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 08886| } 08887| 08888| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 9195 Line | AML source ---------------------------------------------------------------------------------------------------- 09192| Method (_DIS, 0, NotSerialized) 09193| { 09194| DSOD (0x01) 09195| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 09196| } 09197| 09198| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1127: Test 1, Assembler error in line 9242 Line | AML source ---------------------------------------------------------------------------------------------------- 09239| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._MAX, MAX2) 09240| CreateByteField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._LEN, LEN2) 09241| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y22._INT, IRQ0) 09242| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y23._DMA, DMA0) | ^ | warning level 0 1127: ResourceTag smaller than Field (Tag: 8 bits, Field: 16 bits) 09243| If (RLPD) 09244| { 09245| Store (0x00, Local0) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1128: Test 1, Assembler error in line 18682 Line | AML source ---------------------------------------------------------------------------------------------------- 18679| Store (0x01, Index (DerefOf (Index (Local0, 0x02)), 0x01)) 18680| If (And (WDPE, 0x40)) 18681| { 18682| Wait (\_SB.BEVT, 0x10) | ^ | warning level 0 1128: Result is not used, possible operator timeout will be missed 18683| } 18684| 18685| Store (BRID, Index (DerefOf (Index (Local0, 0x02)), 0x02)) ==================================================================================================== ADVICE: (for warning level 0 #1128): The operation can possibly timeout, and hence the return value indicates an timeout error. However, because the return value is not checked this very probably indicates that the code is buggy. A possible scenario is that a mutex times out and the code attempts to access data in a critical region when it should not. This will lead to undefined behaviour. This should be fixed. Table DSDT (0) reassembly: Found 2 errors, 4 warnings. Test 2 of 2: Disassemble and reassemble SSDT PASSED: Test 2, SSDT (0) reassembly, Found 0 errors, 0 warnings. FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 60 Line | AML source ---------------------------------------------------------------------------------------------------- 00057| { 00058| Store (CPDC (Arg0), Local0) 00059| GCAP (Local0) 00060| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00061| } 00062| 00063| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 174 Line | AML source ---------------------------------------------------------------------------------------------------- 00171| { 00172| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00173| GCAP (Local0) 00174| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00175| } 00176| 00177| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 244 Line | AML source ---------------------------------------------------------------------------------------------------- 00241| { 00242| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00243| GCAP (Local0) 00244| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00245| } 00246| 00247| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 290 Line | AML source ---------------------------------------------------------------------------------------------------- 00287| { 00288| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00289| GCAP (Local0) 00290| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00291| } 00292| 00293| Method (_OSC, 4, NotSerialized) ==================================================================================================== Table SSDT (1) reassembly: Found 0 errors, 4 warnings. PASSED: Test 2, SSDT (2) reassembly, Found 0 errors, 0 warnings. PASSED: Test 2, SSDT (3) reassembly, Found 0 errors, 0 warnings. ==================================================================================================== 3 passed, 10 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== Critical failures: 1 method test, at 1 log line: 1449: Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. High failures: 11 klog test, at 1 log line: 121: HIGH Kernel message: [ 3.512783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) syntaxcheck test, at 1 log line: 1668: Assembler error in line 2261 syntaxcheck test, at 1 log line: 1687: Assembler error in line 2268 syntaxcheck test, at 1 log line: 1703: Assembler error in line 8885 syntaxcheck test, at 1 log line: 1716: Assembler error in line 9195 syntaxcheck test, at 1 log line: 1729: Assembler error in line 9242 syntaxcheck test, at 1 log line: 1742: Assembler error in line 18682 syntaxcheck test, at 1 log line: 1766: Assembler error in line 60 syntaxcheck test, at 1 log line: 1779: Assembler error in line 174 syntaxcheck test, at 1 log line: 1792: Assembler error in line 244 syntaxcheck test, at 1 log line: 1805: Assembler error in line 290 Medium failures: 9 mtrr test, at 1 log line: 76: Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. mtrr test, at 1 log line: 78: Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. msr test, at 1 log line: 165: MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). msr test, at 1 log line: 173: MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). wmi test, at 1 log line: 528: GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. method test, at 1 log line: 1002: \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1011: \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1443: Method _BCL should return a package of more than 2 integers, got just 2. acpitables test, at 1 log line: 1643: FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Se

  Read the article

• Help with Collision Resolution?

  - by Milo

  I'm trying to learn about physics by trying to make a simplified GTA 2 clone. My only problem is collision resolution. Everything else works great. I have a rigid body class and from there cars and a wheel class: class RigidBody extends Entity { //linear private Vector2D velocity = new Vector2D(); private Vector2D forces = new Vector2D(); private OBB2D predictionRect = new OBB2D(new Vector2D(), 1.0f, 1.0f, 0.0f); private float mass; private Vector2D deltaVec = new Vector2D(); private Vector2D v = new Vector2D(); //angular private float angularVelocity; private float torque; private float inertia; //graphical private Vector2D halfSize = new Vector2D(); private Bitmap image; private Matrix mat = new Matrix(); private float[] Vector2Ds = new float[2]; private Vector2D tangent = new Vector2D(); private static Vector2D worldRelVec = new Vector2D(); private static Vector2D relWorldVec = new Vector2D(); private static Vector2D pointVelVec = new Vector2D(); public RigidBody() { //set these defaults so we don't get divide by zeros mass = 1.0f; inertia = 1.0f; setLayer(LAYER_OBJECTS); } protected void rectChanged() { if(getWorld() != null) { getWorld().updateDynamic(this); } } //intialize out parameters public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //store physical parameters this.halfSize = halfSize; this.mass = mass; image = bitmap; inertia = (1.0f / 20.0f) * (halfSize.x * halfSize.x) * (halfSize.y * halfSize.y) * mass; RectF rect = new RectF(); float scalar = 10.0f; rect.left = (int)-halfSize.x * scalar; rect.top = (int)-halfSize.y * scalar; rect.right = rect.left + (int)(halfSize.x * 2.0f * scalar); rect.bottom = rect.top + (int)(halfSize.y * 2.0f * scalar); setRect(rect); predictionRect.set(rect); } public void setLocation(Vector2D position, float angle) { getRect().set(position, getWidth(), getHeight(), angle); rectChanged(); } public void setPredictionLocation(Vector2D position, float angle) { getPredictionRect().set(position, getWidth(), getHeight(), angle); } public void setPredictionCenter(Vector2D center) { getPredictionRect().moveTo(center); } public void setPredictionAngle(float angle) { predictionRect.setAngle(angle); } public Vector2D getPosition() { return getRect().getCenter(); } public OBB2D getPredictionRect() { return predictionRect; } @Override public void update(float timeStep) { doUpdate(false,timeStep); } public void doUpdate(boolean prediction, float timeStep) { //integrate physics //linear Vector2D acceleration = Vector2D.scalarDivide(forces, mass); if(prediction) { Vector2D velocity = Vector2D.add(this.velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); c = Vector2D.add(getRect().getCenter(), Vector2D.scalarMultiply(velocity , timeStep)); setPredictionCenter(c); //forces = new Vector2D(0,0); //clear forces } else { velocity.x += (acceleration.x * timeStep); velocity.y += (acceleration.y * timeStep); //velocity = Vector2D.add(velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); v.x = getRect().getCenter().getX() + (velocity.x * timeStep); v.y = getRect().getCenter().getY() + (velocity.y * timeStep); deltaVec.x = v.x - c.x; deltaVec.y = v.y - c.y; deltaVec.normalize(); setCenter(v.x, v.y); forces.x = 0; //clear forces forces.y = 0; } //angular float angAcc = torque / inertia; if(prediction) { float angularVelocity = this.angularVelocity + angAcc * timeStep; setPredictionAngle(getAngle() + angularVelocity * timeStep); //torque = 0; //clear torque } else { angularVelocity += angAcc * timeStep; setAngle(getAngle() + angularVelocity * timeStep); torque = 0; //clear torque } } public void updatePrediction(float timeStep) { doUpdate(true, timeStep); } //take a relative Vector2D and make it a world Vector2D public Vector2D relativeToWorld(Vector2D relative) { mat.reset(); Vector2Ds[0] = relative.x; Vector2Ds[1] = relative.y; mat.postRotate(JMath.radToDeg(getAngle())); mat.mapVectors(Vector2Ds); relWorldVec.x = Vector2Ds[0]; relWorldVec.y = Vector2Ds[1]; return new Vector2D(Vector2Ds[0], Vector2Ds[1]); } //take a world Vector2D and make it a relative Vector2D public Vector2D worldToRelative(Vector2D world) { mat.reset(); Vector2Ds[0] = world.x; Vector2Ds[1] = world.y; mat.postRotate(JMath.radToDeg(-getAngle())); mat.mapVectors(Vector2Ds); return new Vector2D(Vector2Ds[0], Vector2Ds[1]); } //velocity of a point on body public Vector2D pointVelocity(Vector2D worldOffset) { tangent.x = -worldOffset.y; tangent.y = worldOffset.x; return Vector2D.add( Vector2D.scalarMultiply(tangent, angularVelocity) , velocity); } public void applyForce(Vector2D worldForce, Vector2D worldOffset) { //add linear force forces.x += worldForce.x; forces.y += worldForce.y; //add associated torque torque += Vector2D.cross(worldOffset, worldForce); } @Override public void draw( GraphicsContext c) { c.drawRotatedScaledBitmap(image, getPosition().x, getPosition().y, getWidth(), getHeight(), getAngle()); } public Vector2D getVelocity() { return velocity; } public void setVelocity(Vector2D velocity) { this.velocity = velocity; } public Vector2D getDeltaVec() { return deltaVec; } } Vehicle public class Wheel { private Vector2D forwardVec; private Vector2D sideVec; private float wheelTorque; private float wheelSpeed; private float wheelInertia; private float wheelRadius; private Vector2D position = new Vector2D(); public Wheel(Vector2D position, float radius) { this.position = position; setSteeringAngle(0); wheelSpeed = 0; wheelRadius = radius; wheelInertia = (radius * radius) * 1.1f; } public void setSteeringAngle(float newAngle) { Matrix mat = new Matrix(); float []vecArray = new float[4]; //forward Vector vecArray[0] = 0; vecArray[1] = 1; //side Vector vecArray[2] = -1; vecArray[3] = 0; mat.postRotate(newAngle / (float)Math.PI * 180.0f); mat.mapVectors(vecArray); forwardVec = new Vector2D(vecArray[0], vecArray[1]); sideVec = new Vector2D(vecArray[2], vecArray[3]); } public void addTransmissionTorque(float newValue) { wheelTorque += newValue; } public float getWheelSpeed() { return wheelSpeed; } public Vector2D getAnchorPoint() { return position; } public Vector2D calculateForce(Vector2D relativeGroundSpeed, float timeStep, boolean prediction) { //calculate speed of tire patch at ground Vector2D patchSpeed = Vector2D.scalarMultiply(Vector2D.scalarMultiply( Vector2D.negative(forwardVec), wheelSpeed), wheelRadius); //get velocity difference between ground and patch Vector2D velDifference = Vector2D.add(relativeGroundSpeed , patchSpeed); //project ground speed onto side axis Float forwardMag = new Float(0.0f); Vector2D sideVel = velDifference.project(sideVec); Vector2D forwardVel = velDifference.project(forwardVec, forwardMag); //calculate super fake friction forces //calculate response force Vector2D responseForce = Vector2D.scalarMultiply(Vector2D.negative(sideVel), 2.0f); responseForce = Vector2D.subtract(responseForce, forwardVel); float topSpeed = 500.0f; //calculate torque on wheel wheelTorque += forwardMag * wheelRadius; //integrate total torque into wheel wheelSpeed += wheelTorque / wheelInertia * timeStep; //top speed limit (kind of a hack) if(wheelSpeed > topSpeed) { wheelSpeed = topSpeed; } //clear our transmission torque accumulator wheelTorque = 0; //return force acting on body return responseForce; } public void setTransmissionTorque(float newValue) { wheelTorque = newValue; } public float getTransmissionTourque() { return wheelTorque; } public void setWheelSpeed(float speed) { wheelSpeed = speed; } } //our vehicle object public class Vehicle extends RigidBody { private Wheel [] wheels = new Wheel[4]; private boolean throttled = false; public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //front wheels wheels[0] = new Wheel(new Vector2D(halfSize.x, halfSize.y), 0.45f); wheels[1] = new Wheel(new Vector2D(-halfSize.x, halfSize.y), 0.45f); //rear wheels wheels[2] = new Wheel(new Vector2D(halfSize.x, -halfSize.y), 0.75f); wheels[3] = new Wheel(new Vector2D(-halfSize.x, -halfSize.y), 0.75f); super.initialize(halfSize, mass, bitmap); } public void setSteering(float steering) { float steeringLock = 0.13f; //apply steering angle to front wheels wheels[0].setSteeringAngle(steering * steeringLock); wheels[1].setSteeringAngle(steering * steeringLock); } public void setThrottle(float throttle, boolean allWheel) { float torque = 85.0f; throttled = true; //apply transmission torque to back wheels if (allWheel) { wheels[0].addTransmissionTorque(throttle * torque); wheels[1].addTransmissionTorque(throttle * torque); } wheels[2].addTransmissionTorque(throttle * torque); wheels[3].addTransmissionTorque(throttle * torque); } public void setBrakes(float brakes) { float brakeTorque = 15.0f; //apply brake torque opposing wheel vel for (Wheel wheel : wheels) { float wheelVel = wheel.getWheelSpeed(); wheel.addTransmissionTorque(-wheelVel * brakeTorque * brakes); } } public void doUpdate(float timeStep, boolean prediction) { for (Wheel wheel : wheels) { float wheelVel = wheel.getWheelSpeed(); //apply negative force to naturally slow down car if(!throttled && !prediction) wheel.addTransmissionTorque(-wheelVel * 0.11f); Vector2D worldWheelOffset = relativeToWorld(wheel.getAnchorPoint()); Vector2D worldGroundVel = pointVelocity(worldWheelOffset); Vector2D relativeGroundSpeed = worldToRelative(worldGroundVel); Vector2D relativeResponseForce = wheel.calculateForce(relativeGroundSpeed, timeStep,prediction); Vector2D worldResponseForce = relativeToWorld(relativeResponseForce); applyForce(worldResponseForce, worldWheelOffset); } //no throttling yet this frame throttled = false; if(prediction) { super.updatePrediction(timeStep); } else { super.update(timeStep); } } @Override public void update(float timeStep) { doUpdate(timeStep,false); } public void updatePrediction(float timeStep) { doUpdate(timeStep,true); } public void inverseThrottle() { float scalar = 0.2f; for(Wheel wheel : wheels) { wheel.setTransmissionTorque(-wheel.getTransmissionTourque() * scalar); wheel.setWheelSpeed(-wheel.getWheelSpeed() * 0.1f); } } } And my big hack collision resolution: private void update() { camera.setPosition((vehicle.getPosition().x * camera.getScale()) - ((getWidth() ) / 2.0f), (vehicle.getPosition().y * camera.getScale()) - ((getHeight() ) / 2.0f)); //camera.move(input.getAnalogStick().getStickValueX() * 15.0f, input.getAnalogStick().getStickValueY() * 15.0f); if(input.isPressed(ControlButton.BUTTON_GAS)) { vehicle.setThrottle(1.0f, false); } if(input.isPressed(ControlButton.BUTTON_STEAL_CAR)) { vehicle.setThrottle(-1.0f, false); } if(input.isPressed(ControlButton.BUTTON_BRAKE)) { vehicle.setBrakes(1.0f); } vehicle.setSteering(input.getAnalogStick().getStickValueX()); //vehicle.update(16.6666666f / 1000.0f); boolean colided = false; vehicle.updatePrediction(16.66666f / 1000.0f); List<Entity> buildings = world.queryStaticSolid(vehicle,vehicle.getPredictionRect()); if(buildings.size() > 0) { colided = true; } if(!colided) { vehicle.update(16.66f / 1000.0f); } else { Vector2D delta = vehicle.getDeltaVec(); vehicle.setVelocity(Vector2D.negative(vehicle.getVelocity().multiply(0.2f)). add(delta.multiply(-1.0f))); vehicle.inverseThrottle(); } } Here is OBB public class OBB2D { // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(Vector2D center, float w, float h, float angle) { set(center,w,h,angle); } public OBB2D(float left, float top, float width, float height) { set(new Vector2D(left + (width / 2), top + (height / 2)),width,height,0.0f); } public void set(Vector2D center,float w, float h,float angle) { Vector2D X = new Vector2D( (float)Math.cos(angle), (float)Math.sin(angle)); Vector2D Y = new Vector2D((float)-Math.sin(angle), (float)Math.cos(angle)); X = X.multiply( w / 2); Y = Y.multiply( h / 2); corner[0] = center.subtract(X).subtract(Y); corner[1] = center.add(X).subtract(Y); corner[2] = center.add(X).add(Y); corner[3] = center.subtract(X).add(Y); computeAxes(); extents.x = w / 2; extents.y = h / 2; computeDimensions(center,angle); } private void computeDimensions(Vector2D center,float angle) { this.center.x = center.x; this.center.y = center.y; this.angle = angle; boundingRect.left = Math.min(Math.min(corner[0].x, corner[3].x), Math.min(corner[1].x, corner[2].x)); boundingRect.top = Math.min(Math.min(corner[0].y, corner[1].y),Math.min(corner[2].y, corner[3].y)); boundingRect.right = Math.max(Math.max(corner[1].x, corner[2].x), Math.max(corner[0].x, corner[3].x)); boundingRect.bottom = Math.max(Math.max(corner[2].y, corner[3].y),Math.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(new Vector2D(rect.centerX(),rect.centerY()),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0] = corner[1].subtract(corner[0]); axis[1] = corner[3].subtract(corner[0]); // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { axis[a] = axis[a].divide((axis[a].length() * axis[a].length())); origin[a] = corner[0].dot(axis[a]); } } public void moveTo(Vector2D center) { Vector2D centroid = (corner[0].add(corner[1]).add(corner[2]).add(corner[3])).divide(4.0f); Vector2D translation = center.subtract(centroid); for (int c = 0; c < 4; ++c) { corner[c] = corner[c].add(translation); } computeAxes(); computeDimensions(center,angle); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } }; What I do is when I predict a hit on the car, I force it back. It does not work that well and seems like a bad idea. What could I do to have more proper collision resolution. Such that if I hit a wall I will never get stuck in it and if I hit the side of a wall I can steer my way out of it. Thanks I found this nice ppt. It talks about pulling objects apart and calculating new velocities. How could I calc new velocities in my case? http://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CC8QFjAB&url=http%3A%2F%2Fcoitweb.uncc.edu%2F~tbarnes2%2FGameDesignFall05%2FSlides%2FCh4.2-CollDet.ppt&ei=x4ucULy5M6-N0QGRy4D4Cg&usg=AFQjCNG7FVDXWRdLv8_-T5qnFyYld53cTQ&cad=rja

  Read the article

• Alert visualization recipe: Get out your blender, drop in some sp_send_dbmail, Google Charts API, add your favorite colors and sprinkle with html. Blend till it’s smooth and looks pretty enough to taste.

  - by Maria Zakourdaev

    I really like database monitoring. My email inbox have a constant flow of different types of alerts coming from our production servers with all kinds of information, sometimes more useful and sometimes less useful. Usually database alerts look really simple, it’s usually a plain text email saying “Prod1 Database data file on Server X is 80% used. You’d better grow it manually before some query triggers the AutoGrowth process”. Imagine you could have received email like the one below.  In addition to the alert description it could have also included the the database file growth chart over the past 6 months. Wouldn’t it give you much more information whether the data growth is natural or extreme? That’s truly what data visualization is for. Believe it or not, I have sent the graph below from SQL Server stored procedure without buying any additional data monitoring/visualization tool.   Would you like to visualize your database alerts like I do? Then like myself, you’d love the Google Charts. All you need to know is a little HTML and have a mail profile configured on your SQL Server instance regardless of the SQL Server version. First of all, I hope you know that the sp_send_dbmail procedure has a great parameter @body_format = ‘HTML’, which allows us to send rich and colorful messages instead of boring black and white ones. All that we need is to dynamically create HTML code. This is how, for instance, you can create a table and populate it with some data: DECLARE @html varchar(max) SET @html = '<html>' + '<H3><font id="Text" style='color: Green;'>Top Databases: </H3>' + '<table border="1" bordercolor="#3300FF" style='background-color:#DDF8CC' width='70%' cellpadding='3' cellspacing='3'>' + '<tr><font color="Green"><th>Database Name</th><th>Size</th><th>Physical Name</th></tr>' + CAST( (SELECT TOP 10                             td = name,'',                             td = size * 8/1024 ,'',                             td = physical_name              FROM sys.master_files               ORDER BY size DESC             FOR XML PATH ('tr'),TYPE ) AS VARCHAR(MAX)) + '</table>' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject ='Top databases', @body = @html, @body_format = 'HTML' This is the result:   If you want to add more visualization effects, you can use Google Charts Tools https://google-developers.appspot.com/chart/interactive/docs/index which is a free and rich library of data visualization charts, they’re also easy to populate and embed. There are two versions of the Google Charts Image based charts: https://google-developers.appspot.com/chart/image/docs/gallery/chart_gall This is an old version, it’s officially deprecated although it will be up for a next few years or so. I really enjoy using this one because it can be viewed within the email body. For mobile devices you need to change the “Load remote images” property in your email application configuration.           Charts based on JavaScript classes: https://google-developers.appspot.com/chart/interactive/docs/gallery This API is newer, with rich and highly interactive charts, and it’s much more easier to understand and configure. The only downside of it is that they cannot be viewed within the email body. Outlook, Gmail and many other email clients, as part of their security policy, do not run any JavaScript that’s placed within the email body. However, you can still enjoy this API by sending the report as an email attachment. Here is an example of the old version of Google Charts API, sending the same top databases report as in the previous example but instead of a simple table, this script is using a pie chart right from  the T-SQL code DECLARE @html  varchar(8000) DECLARE @Series  varchar(800),@Labels  varchar(8000),@Legend  varchar(8000);     SET @Series = ''; SET @Labels = ''; SET @Legend = ''; SELECT TOP 5 @Series = @Series + CAST(size * 8/1024 as varchar) + ',',                         @Labels = @Labels +CAST(size * 8/1024 as varchar) + 'MB'+'|',                         @Legend = @Legend + name + '|' FROM sys.master_files ORDER BY size DESC SELECT @Series = SUBSTRING(@Series,1,LEN(@Series)-1),         @Labels = SUBSTRING(@Labels,1,LEN(@Labels)-1),         @Legend = SUBSTRING(@Legend,1,LEN(@Legend)-1) SET @html =   '<H3><font color="Green"> '+@@ServerName+' top 5 databases : </H3>'+    '<br>'+    '<img src="http://chart.apis.google.com/chart?'+    'chf=bg,s,DDF8CC&'+    'cht=p&'+    'chs=400x200&'+    'chco=3072F3|7777CC|FF9900|FF0000|4A8C26&'+    'chd=t:'+@Series+'&'+    'chl='+@Labels+'&'+    'chma=0,0,0,0&'+    'chdl='+@Legend+'&'+    'chdlp=b"'+    'alt="'+@@ServerName+' top 5 databases" />'              EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]',                             @subject = 'Top databases',                             @body = @html,                             @body_format = 'HTML' This is what you get. Isn’t it great? Chart parameters reference: chf     Gradient fill  bg - backgroud ; s- solid cht     chart type  ( p - pie) chs        chart size width/height chco    series colors chd        chart data string        1,2,3,2 chl        pir chart labels        a|b|c|d chma    chart margins chdl    chart legend            a|b|c|d chdlp    chart legend text        b - bottom of chart   Line graph implementation is also really easy and powerful DECLARE @html varchar(max) DECLARE @Series varchar(max) DECLARE @HourList varchar(max) SET @Series = ''; SET @HourList = ''; SELECT @HourList = @HourList + SUBSTRING(CONVERT(varchar(13),last_execution_time,121), 12,2)  + '|' ,              @Series = @Series + CAST( COUNT(1) as varchar) + ',' FROM sys.dm_exec_query_stats s     CROSS APPLY sys.dm_exec_sql_text(plan_handle) t WHERE last_execution_time > = getdate()-1 GROUP BY CONVERT(varchar(13),last_execution_time,121) ORDER BY CONVERT(varchar(13),last_execution_time,121) SET @Series = SUBSTRING(@Series,1,LEN(@Series)-1) SET @html = '<img src="http://chart.apis.google.com/chart?'+ 'chco=CA3D05,87CEEB&'+ 'chd=t:'+@Series+'&'+ 'chds=1,350&'+ 'chdl= Proc executions from cache&'+ 'chf=bg,s,1F1D1D|c,lg,0,363433,1.0,2E2B2A,0.0&'+ 'chg=25.0,25.0,3,2&'+ 'chls=3|3&'+ 'chm=d,CA3D05,0,-1,12,0|d,FFFFFF,0,-1,8,0|d,87CEEB,1,-1,12,0|d,FFFFFF,1,-1,8,0&'+ 'chs=600x450&'+ 'cht=lc&'+ 'chts=FFFFFF,14&'+ 'chtt=Executions for from' +(SELECT CONVERT(varchar(16),min(last_execution_time),121)          FROM sys.dm_exec_query_stats          WHERE last_execution_time > = getdate()-1) +' till '+ +(SELECT CONVERT(varchar(16),max(last_execution_time),121)     FROM sys.dm_exec_query_stats) + '&'+ 'chxp=1,50.0|4,50.0&'+ 'chxs=0,FFFFFF,12,0|1,FFFFFF,12,0|2,FFFFFF,12,0|3,FFFFFF,12,0|4,FFFFFF,14,0&'+ 'chxt=y,y,x,x,x&'+ 'chxl=0:|1|350|1:|N|2:|'+@HourList+'3:|Hour&'+ 'chma=55,120,0,0" alt="" />' EXEC msdb.dbo.sp_send_dbmail @recipients = '[email protected]', @subject ='Daily number of executions', @body = @html, @body_format = 'HTML' Chart parameters reference: chco    series colors chd        series data chds    scale format chdl    chart legend chf        background fills chg        grid line chls    line style chm        line fill chs        chart size cht        chart type chts    chart style chtt    chart title chxp    axis label positions chxs    axis label styles chxt    axis tick mark styles chxl    axis labels chma    chart margins If you don’t mind to get your charts as an email attachment, you can enjoy the Java based Google Charts which are even easier to configure, and have much more advanced graphics. In the example below, the sp_send_email procedure uses the parameter @query which will be executed at the time that sp_send_dbemail is executed and the HTML result of this execution will be attached to the email. DECLARE @html varchar(max),@query varchar(max) DECLARE @SeriesDBusers  varchar(800);     SET @SeriesDBusers = ''; SELECT @SeriesDBusers = @SeriesDBusers +  ' ["'+DB_NAME(r.database_id) +'", ' +cast(count(1) as varchar)+'],' FROM sys.dm_exec_requests r GROUP BY DB_NAME(database_id) ORDER BY count(1) desc; SET @SeriesDBusers = SUBSTRING(@SeriesDBusers,1,LEN(@SeriesDBusers)-1) SET @query = ' PRINT '' <html>   <head>     <script type="text/javascript" src="https://www.google.com/jsapi"></script>     <script type="text/javascript">       google.load("visualization", "1", {packages:["corechart"]});        google.setOnLoadCallback(drawChart);       function drawChart() {                      var data = google.visualization.arrayToDataTable([                        ["Database Name", "Active users"],                        '+@SeriesDBusers+'                      ]);                        var options = {                        title: "Active users",                        pieSliceText: "value"                      };                        var chart = new google.visualization.PieChart(document.getElementById("chart_div"));                      chart.draw(data, options);       };     </script>   </head>   <body>     <table>     <tr><td>         <div id="chart_div" style='width: 800px; height: 300px;'></div>         </td></tr>     </table>   </body> </html> ''' EXEC msdb.dbo.sp_send_dbmail    @recipients = '[email protected]',    @subject ='Active users',    @body = @html,    @body_format = 'HTML',    @query = @Query,     @attach_query_result_as_file = 1,     @query_attachment_filename = 'Results.htm' After opening the email attachment in the browser you are getting this kind of report: In fact, the above is not only for database alerts. It can be used for applicative reports if you need high levels of customization that you cannot achieve using standard methods like SSRS. If you need more information on how to customize the charts, you can try the following: Image Based Charts wizard https://google-developers.appspot.com/chart/image/docs/chart_wizard  Live Image Charts Playground https://google-developers.appspot.com/chart/image/docs/chart_playground Image Based Charts Parameters List https://google-developers.appspot.com/chart/image/docs/chart_params Java Script Charts Playground https://code.google.com/apis/ajax/playground/?type=visualization Use the above examples as a starting point for your procedures and I’d be more than happy to hear of your implementations of the above techniques. Yours, Maria

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• Node.js Adventure - Storage Services and Service Runtime

  - by Shaun

  When I described on how to host a Node.js application on Windows Azure, one of questions might be raised about how to consume the vary Windows Azure services, such as the storage, service bus, access control, etc.. Interact with windows azure services is available in Node.js through the Windows Azure Node.js SDK, which is a module available in NPM. In this post I would like to describe on how to use Windows Azure Storage (a.k.a. WAS) as well as the service runtime.   Consume Windows Azure Storage Let’s firstly have a look on how to consume WAS through Node.js. As we know in the previous post we can host Node.js application on Windows Azure Web Site (a.k.a. WAWS) as well as Windows Azure Cloud Service (a.k.a. WACS). In theory, WAWS is also built on top of WACS worker roles with some more features. Hence in this post I will only demonstrate for hosting in WACS worker role. The Node.js code can be used when consuming WAS when hosted on WAWS. But since there’s no roles in WAWS, the code for consuming service runtime mentioned in the next section cannot be used for WAWS node application. We can use the solution that I created in my last post. Alternatively we can create a new windows azure project in Visual Studio with a worker role, add the “node.exe” and “index.js” and install “express” and “node-sqlserver” modules, make all files as “Copy always”. In order to use windows azure services we need to have Windows Azure Node.js SDK, as knows as a module named “azure” which can be installed through NPM. Once we downloaded and installed, we need to include them in our worker role project and make them as “Copy always”. You can use my “Copy all always” tool mentioned in my last post to update the currently worker role project file. You can also find the source code of this tool here. The source code of Windows Azure SDK for Node.js can be found in its GitHub page. It contains two parts. One is a CLI tool which provides a cross platform command line package for Mac and Linux to manage WAWS and Windows Azure Virtual Machines (a.k.a. WAVM). The other is a library for managing and consuming vary windows azure services includes tables, blobs, queues, service bus and the service runtime. I will not cover all of them but will only demonstrate on how to use tables and service runtime information in this post. You can find the full document of this SDK here. Back to Visual Studio and open the “index.js”, let’s continue our application from the last post, which was working against Windows Azure SQL Database (a.k.a. WASD). The code should looks like this. 1: var express = require("express"); 2: var sql = require("node-sqlserver"); 3:  4: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:ac6271ya9e.database.windows.net,1433;Database=synctile;Uid=shaunxu@ac6271ya9e;Pwd={PASSWORD};Encrypt=yes;Connection Timeout=30;"; 5: var port = 80; 6:  7: var app = express(); 8:  9: app.configure(function () { 10: app.use(express.bodyParser()); 11: }); 12:  13: app.get("/", function (req, res) { 14: sql.open(connectionString, function (err, conn) { 15: if (err) { 16: console.log(err); 17: res.send(500, "Cannot open connection."); 18: } 19: else { 20: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 21: if (err) { 22: console.log(err); 23: res.send(500, "Cannot retrieve records."); 24: } 25: else { 26: res.json(results); 27: } 28: }); 29: } 30: }); 31: }); 32:  33: app.get("/text/:key/:culture", function (req, res) { 34: sql.open(connectionString, function (err, conn) { 35: if (err) { 36: console.log(err); 37: res.send(500, "Cannot open connection."); 38: } 39: else { 40: var key = req.params.key; 41: var culture = req.params.culture; 42: var command = "SELECT * FROM [Resource] WHERE [Key] = '" + key + "' AND [Culture] = '" + culture + "'"; 43: conn.queryRaw(command, function (err, results) { 44: if (err) { 45: console.log(err); 46: res.send(500, "Cannot retrieve records."); 47: } 48: else { 49: res.json(results); 50: } 51: }); 52: } 53: }); 54: }); 55:  56: app.get("/sproc/:key/:culture", function (req, res) { 57: sql.open(connectionString, function (err, conn) { 58: if (err) { 59: console.log(err); 60: res.send(500, "Cannot open connection."); 61: } 62: else { 63: var key = req.params.key; 64: var culture = req.params.culture; 65: var command = "EXEC GetItem '" + key + "', '" + culture + "'"; 66: conn.queryRaw(command, function (err, results) { 67: if (err) { 68: console.log(err); 69: res.send(500, "Cannot retrieve records."); 70: } 71: else { 72: res.json(results); 73: } 74: }); 75: } 76: }); 77: }); 78:  79: app.post("/new", function (req, res) { 80: var key = req.body.key; 81: var culture = req.body.culture; 82: var val = req.body.val; 83:  84: sql.open(connectionString, function (err, conn) { 85: if (err) { 86: console.log(err); 87: res.send(500, "Cannot open connection."); 88: } 89: else { 90: var command = "INSERT INTO [Resource] VALUES ('" + key + "', '" + culture + "', N'" + val + "')"; 91: conn.queryRaw(command, function (err, results) { 92: if (err) { 93: console.log(err); 94: res.send(500, "Cannot retrieve records."); 95: } 96: else { 97: res.send(200, "Inserted Successful"); 98: } 99: }); 100: } 101: }); 102: }); 103:  104: app.listen(port); Now let’s create a new function, copy the records from WASD to table service. 1. Delete the table named “resource”. 2. Create a new table named “resource”. These 2 steps ensures that we have an empty table. 3. Load all records from the “resource” table in WASD. 4. For each records loaded from WASD, insert them into the table one by one. 5. Prompt to user when finished. In order to use table service we need the storage account and key, which can be found from the developer portal. Just select the storage account and click the Manage Keys button. Then create two local variants in our Node.js application for the storage account name and key. Since we need to use WAS we need to import the azure module. Also I created another variant stored the table name. In order to work with table service I need to create the storage client for table service. This is very similar as the Windows Azure SDK for .NET. As the code below I created a new variant named “client” and use “createTableService”, specified my storage account name and key. 1: var azure = require("azure"); 2: var storageAccountName = "synctile"; 3: var storageAccountKey = "/cOy9L7xysXOgPYU9FjDvjrRAhaMX/5tnOpcjqloPNDJYucbgTy7MOrAW7CbUg6PjaDdmyl+6pkwUnKETsPVNw=="; 4: var tableName = "resource"; 5: var client = azure.createTableService(storageAccountName, storageAccountKey); Now create a new function for URL “/was/init” so that we can trigger it through browser. Then in this function we will firstly load all records from WASD. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: } 18: } 19: }); 20: } 21: }); 22: }); When we succeed loaded all records we can start to transform them into table service. First I need to recreate the table in table service. This can be done by deleting and creating the table through table client I had just created previously. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: // transform the records 26: } 27: }); 28: }); 29: } 30: } 31: }); 32: } 33: }); 34: }); As you can see, the azure SDK provide its methods in callback pattern. In fact, almost all modules in Node.js use the callback pattern. For example, when I deleted a table I invoked “deleteTable” method, provided the name of the table and a callback function which will be performed when the table had been deleted or failed. Underlying, the azure module will perform the table deletion operation in POSIX async threads pool asynchronously. And once it’s done the callback function will be performed. This is the reason we need to nest the table creation code inside the deletion function. If we perform the table creation code after the deletion code then they will be invoked in parallel. Next, for each records in WASD I created an entity and then insert into the table service. Finally I send the response to the browser. Can you find a bug in the code below? I will describe it later in this post. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: // transform the records 26: for (var i = 0; i < results.rows.length; i++) { 27: var entity = { 28: "PartitionKey": results.rows[i][1], 29: "RowKey": results.rows[i][0], 30: "Value": results.rows[i][2] 31: }; 32: client.insertEntity(tableName, entity, function (error) { 33: if (error) { 34: error["target"] = "insertEntity"; 35: res.send(500, error); 36: } 37: else { 38: console.log("entity inserted"); 39: } 40: }); 41: } 42: // send the 43: console.log("all done"); 44: res.send(200, "All done!"); 45: } 46: }); 47: }); 48: } 49: } 50: }); 51: } 52: }); 53: }); Now we can publish it to the cloud and have a try. But normally we’d better test it at the local emulator first. In Node.js SDK there are three build-in properties which provides the account name, key and host address for local storage emulator. We can use them to initialize our table service client. We also need to change the SQL connection string to let it use my local database. The code will be changed as below. 1: // windows azure sql database 2: //var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:ac6271ya9e.database.windows.net,1433;Database=synctile;Uid=shaunxu@ac6271ya9e;Pwd=eszqu94XZY;Encrypt=yes;Connection Timeout=30;"; 3: // sql server 4: var connectionString = "Driver={SQL Server Native Client 11.0};Server={.};Database={Caspar};Trusted_Connection={Yes};"; 5:  6: var azure = require("azure"); 7: var storageAccountName = "synctile"; 8: var storageAccountKey = "/cOy9L7xysXOgPYU9FjDvjrRAhaMX/5tnOpcjqloPNDJYucbgTy7MOrAW7CbUg6PjaDdmyl+6pkwUnKETsPVNw=="; 9: var tableName = "resource"; 10: // windows azure storage 11: //var client = azure.createTableService(storageAccountName, storageAccountKey); 12: // local storage emulator 13: var client = azure.createTableService(azure.ServiceClient.DEVSTORE_STORAGE_ACCOUNT, azure.ServiceClient.DEVSTORE_STORAGE_ACCESS_KEY, azure.ServiceClient.DEVSTORE_TABLE_HOST); Now let’s run the application and navigate to “localhost:12345/was/init” as I hosted it on port 12345. We can find it transformed the data from my local database to local table service. Everything looks fine. But there is a bug in my code. If we have a look on the Node.js command window we will find that it sent response before all records had been inserted, which is not what I expected. The reason is that, as I mentioned before, Node.js perform all IO operations in non-blocking model. When we inserted the records we executed the table service insert method in parallel, and the operation of sending response was also executed in parallel, even though I wrote it at the end of my logic. The correct logic should be, when all entities had been copied to table service with no error, then I will send response to the browser, otherwise I should send error message to the browser. To do so I need to import another module named “async”, which helps us to coordinate our asynchronous code. Install the module and import it at the beginning of the code. Then we can use its “forEach” method for the asynchronous code of inserting table entities. The first argument of “forEach” is the array that will be performed. The second argument is the operation for each items in the array. And the third argument will be invoked then all items had been performed or any errors occurred. Here we can send our response to browser. 1: app.get("/was/init", function (req, res) { 2: // load all records from windows azure sql database 3: sql.open(connectionString, function (err, conn) { 4: if (err) { 5: console.log(err); 6: res.send(500, "Cannot open connection."); 7: } 8: else { 9: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 10: if (err) { 11: console.log(err); 12: res.send(500, "Cannot retrieve records."); 13: } 14: else { 15: if (results.rows.length > 0) { 16: // begin to transform the records into table service 17: // recreate the table named 'resource' 18: client.deleteTable(tableName, function (error) { 19: client.createTableIfNotExists(tableName, function (error) { 20: if (error) { 21: error["target"] = "createTableIfNotExists"; 22: res.send(500, error); 23: } 24: else { 25: async.forEach(results.rows, 26: // transform the records 27: function (row, callback) { 28: var entity = { 29: "PartitionKey": row[1], 30: "RowKey": row[0], 31: "Value": row[2] 32: }; 33: client.insertEntity(tableName, entity, function (error) { 34: if (error) { 35: callback(error); 36: } 37: else { 38: console.log("entity inserted."); 39: callback(null); 40: } 41: }); 42: }, 43: // send reponse 44: function (error) { 45: if (error) { 46: error["target"] = "insertEntity"; 47: res.send(500, error); 48: } 49: else { 50: console.log("all done"); 51: res.send(200, "All done!"); 52: } 53: } 54: ); 55: } 56: }); 57: }); 58: } 59: } 60: }); 61: } 62: }); 63: }); Run it locally and now we can find the response was sent after all entities had been inserted. Query entities against table service is simple as well. Just use the “queryEntity” method from the table service client and providing the partition key and row key. We can also provide a complex query criteria as well, for example the code here. In the code below I queried an entity by the partition key and row key, and return the proper localization value in response. 1: app.get("/was/:key/:culture", function (req, res) { 2: var key = req.params.key; 3: var culture = req.params.culture; 4: client.queryEntity(tableName, culture, key, function (error, entity) { 5: if (error) { 6: res.send(500, error); 7: } 8: else { 9: res.json(entity); 10: } 11: }); 12: }); And then tested it on local emulator. Finally if we want to publish this application to the cloud we should change the database connection string and storage account. For more information about how to consume blob and queue service, as well as the service bus please refer to the MSDN page.   Consume Service Runtime As I mentioned above, before we published our application to the cloud we need to change the connection string and account information in our code. But if you had played with WACS you should have known that the service runtime provides the ability to retrieve configuration settings, endpoints and local resource information at runtime. Which means we can have these values defined in CSCFG and CSDEF files and then the runtime should be able to retrieve the proper values. For example we can add some role settings though the property window of the role, specify the connection string and storage account for cloud and local. And the can also use the endpoint which defined in role environment to our Node.js application. In Node.js SDK we can get an object from “azure.RoleEnvironment”, which provides the functionalities to retrieve the configuration settings and endpoints, etc.. In the code below I defined the connection string variants and then use the SDK to retrieve and initialize the table client. 1: var connectionString = ""; 2: var storageAccountName = ""; 3: var storageAccountKey = ""; 4: var tableName = ""; 5: var client; 6:  7: azure.RoleEnvironment.getConfigurationSettings(function (error, settings) { 8: if (error) { 9: console.log("ERROR: getConfigurationSettings"); 10: console.log(JSON.stringify(error)); 11: } 12: else { 13: console.log(JSON.stringify(settings)); 14: connectionString = settings["SqlConnectionString"]; 15: storageAccountName = settings["StorageAccountName"]; 16: storageAccountKey = settings["StorageAccountKey"]; 17: tableName = settings["TableName"]; 18:  19: console.log("connectionString = %s", connectionString); 20: console.log("storageAccountName = %s", storageAccountName); 21: console.log("storageAccountKey = %s", storageAccountKey); 22: console.log("tableName = %s", tableName); 23:  24: client = azure.createTableService(storageAccountName, storageAccountKey); 25: } 26: }); In this way we don’t need to amend the code for the configurations between local and cloud environment since the service runtime will take care of it. At the end of the code we will listen the application on the port retrieved from SDK as well. 1: azure.RoleEnvironment.getCurrentRoleInstance(function (error, instance) { 2: if (error) { 3: console.log("ERROR: getCurrentRoleInstance"); 4: console.log(JSON.stringify(error)); 5: } 6: else { 7: console.log(JSON.stringify(instance)); 8: if (instance["endpoints"] && instance["endpoints"]["nodejs"]) { 9: var endpoint = instance["endpoints"]["nodejs"]; 10: app.listen(endpoint["port"]); 11: } 12: else { 13: app.listen(8080); 14: } 15: } 16: }); But if we tested the application right now we will find that it cannot retrieve any values from service runtime. This is because by default, the entry point of this role was defined to the worker role class. In windows azure environment the service runtime will open a named pipeline to the entry point instance, so that it can connect to the runtime and retrieve values. But in this case, since the entry point was worker role and the Node.js was opened inside the role, the named pipeline was established between our worker role class and service runtime, so our Node.js application cannot use it. To fix this problem we need to open the CSDEF file under the azure project, add a new element named Runtime. Then add an element named EntryPoint which specify the Node.js command line. So that the Node.js application will have the connection to service runtime, then it’s able to read the configurations. Start the Node.js at local emulator we can find it retrieved the connections, storage account for local. And if we publish our application to azure then it works with WASD and storage service through the configurations for cloud.   Summary In this post I demonstrated how to use Windows Azure SDK for Node.js to interact with storage service, especially the table service. I also demonstrated on how to use WACS service runtime, how to retrieve the configuration settings and the endpoint information. And in order to make the service runtime available to my Node.js application I need to create an entry point element in CSDEF file and set “node.exe” as the entry point. I used five posts to introduce and demonstrate on how to run a Node.js application on Windows platform, how to use Windows Azure Web Site and Windows Azure Cloud Service worker role to host our Node.js application. I also described how to work with other services provided by Windows Azure platform through Windows Azure SDK for Node.js. Node.js is a very new and young network application platform. But since it’s very simple and easy to learn and deploy, as well as, it utilizes single thread non-blocking IO model, Node.js became more and more popular on web application and web service development especially for those IO sensitive projects. And as Node.js is very good at scaling-out, it’s more useful on cloud computing platform. Use Node.js on Windows platform is new, too. The modules for SQL database and Windows Azure SDK are still under development and enhancement. It doesn’t support SQL parameter in “node-sqlserver”. It does support using storage connection string to create the storage client in “azure”. But Microsoft is working on make them easier to use, working on add more features and functionalities.   PS, you can download the source code here. You can download the source code of my “Copy all always” tool here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Cluster Node Recovery Using Second Node in Solaris Cluster

  - by Onur Bingul

  Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

  Read the article

• Informed TDD &ndash; Kata &ldquo;To Roman Numerals&rdquo;

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/05/28/informed-tdd-ndash-kata-ldquoto-roman-numeralsrdquo.aspxIn a comment on my article on what I call Informed TDD (ITDD) reader gustav asked how this approach would apply to the kata “To Roman Numerals”. And whether ITDD wasn´t a violation of TDD´s principle of leaving out “advanced topics like mocks”. I like to respond with this article to his questions. There´s more to say than fits into a commentary. Mocks and TDD I don´t see in how far TDD is avoiding or opposed to mocks. TDD and mocks are orthogonal. TDD is about pocess, mocks are about structure and costs. Maybe by moving forward in tiny red+green+refactor steps less need arises for mocks. But then… if the functionality you need to implement requires “expensive” resource access you can´t avoid using mocks. Because you don´t want to constantly run all your tests against the real resource. True, in ITDD mocks seem to be in almost inflationary use. That´s not what you usually see in TDD demonstrations. However, there´s a reason for that as I tried to explain. I don´t use mocks as proxies for “expensive” resource. Rather they are stand-ins for functionality not yet implemented. They allow me to get a test green on a high level of abstraction. That way I can move forward in a top-down fashion. But if you think of mocks as “advanced” or if you don´t want to use a tool like JustMock, then you don´t need to use mocks. You just need to stand the sight of red tests for a little longer ;-) Let me show you what I mean by that by doing a kata. ITDD for “To Roman Numerals” gustav asked for the kata “To Roman Numerals”. I won´t explain the requirements again. You can find descriptions and TDD demonstrations all over the internet, like this one from Corey Haines. Now here is, how I would do this kata differently. 1. Analyse A demonstration of TDD should never skip the analysis phase. It should be made explicit. The requirements should be formalized and acceptance test cases should be compiled. “Formalization” in this case to me means describing the API of the required functionality. “[D]esign a program to work with Roman numerals” like written in this “requirement document” is not enough to start software development. Coding should only begin, if the interface between the “system under development” and its context is clear. If this interface is not readily recognizable from the requirements, it has to be developed first. Exploration of interface alternatives might be in order. It might be necessary to show several interface mock-ups to the customer – even if that´s you fellow developer. Designing the interface is a task of it´s own. It should not be mixed with implementing the required functionality behind the interface. Unfortunately, though, this happens quite often in TDD demonstrations. TDD is used to explore the API and implement it at the same time. To me that´s a violation of the Single Responsibility Principle (SRP) which not only should hold for software functional units but also for tasks or activities. In the case of this kata the API fortunately is obvious. Just one function is needed: string ToRoman(int arabic). And it lives in a class ArabicRomanConversions. Now what about acceptance test cases? There are hardly any stated in the kata descriptions. Roman numerals are explained, but no specific test cases from the point of view of a customer. So I just “invent” some acceptance test cases by picking roman numerals from a wikipedia article. They are supposed to be just “typical examples” without special meaning. Given the acceptance test cases I then try to develop an understanding of the problem domain. I´ll spare you that. The domain is trivial and is explain in almost all kata descriptions. How roman numerals are built is not difficult to understand. What´s more difficult, though, might be to find an efficient solution to convert into them automatically. 2. Solve The usual TDD demonstration skips a solution finding phase. Like the interface exploration it´s mixed in with the implementation. But I don´t think this is how it should be done. I even think this is not how it really works for the people demonstrating TDD. They´re simplifying their true software development process because they want to show a streamlined TDD process. I doubt this is helping anybody. Before you code you better have a plan what to code. This does not mean you have to do “Big Design Up-Front”. It just means: Have a clear picture of the logical solution in your head before you start to build a physical solution (code). Evidently such a solution can only be as good as your understanding of the problem. If that´s limited your solution will be limited, too. Fortunately, in the case of this kata your understanding does not need to be limited. Thus the logical solution does not need to be limited or preliminary or tentative. That does not mean you need to know every line of code in advance. It just means you know the rough structure of your implementation beforehand. Because it should mirror the process described by the logical or conceptual solution. Here´s my solution approach: The arabic “encoding” of numbers represents them as an ordered set of powers of 10. Each digit is a factor to multiply a power of ten with. The “encoding” 123 is the short form for a set like this: {1*10^2, 2*10^1, 3*10^0}. And the number is the sum of the set members. The roman “encoding” is different. There is no base (like 10 for arabic numbers), there are just digits of different value, and they have to be written in descending order. The “encoding” XVI is short for [10, 5, 1]. And the number is still the sum of the members of this list. The roman “encoding” thus is simpler than the arabic. Each “digit” can be taken at face value. No multiplication with a base required. But what about IV which looks like a contradiction to the above rule? It is not – if you accept roman “digits” not to be limited to be single characters only. Usually I, V, X, L, C, D, M are viewed as “digits”, and IV, IX etc. are viewed as nuisances preventing a simple solution. All looks different, though, once IV, IX etc. are taken as “digits”. Then MCMLIV is just a sum: M+CM+L+IV which is 1000+900+50+4. Whereas before it would have been understood as M-C+M+L-I+V – which is more difficult because here some “digits” get subtracted. Here´s the list of roman “digits” with their values: {1, I}, {4, IV}, {5, V}, {9, IX}, {10, X}, {40, XL}, {50, L}, {90, XC}, {100, C}, {400, CD}, {500, D}, {900, CM}, {1000, M} Since I take IV, IX etc. as “digits” translating an arabic number becomes trivial. I just need to find the values of the roman “digits” making up the number, e.g. 1954 is made up of 1000, 900, 50, and 4. I call those “digits” factors. If I move from the highest factor (M=1000) to the lowest (I=1) then translation is a two phase process: Find all the factors Translate the factors found Compile the roman representation Translation is just a look-up. Finding, though, needs some calculation: Find the highest remaining factor fitting in the value Remember and subtract it from the value Repeat with remaining value and remaining factors Please note: This is just an algorithm. It´s not code, even though it might be close. Being so close to code in my solution approach is due to the triviality of the problem. In more realistic examples the conceptual solution would be on a higher level of abstraction. With this solution in hand I finally can do what TDD advocates: find and prioritize test cases. As I can see from the small process description above, there are two aspects to test: Test the translation Test the compilation Test finding the factors Testing the translation primarily means to check if the map of factors and digits is comprehensive. That´s simple, even though it might be tedious. Testing the compilation is trivial. Testing factor finding, though, is a tad more complicated. I can think of several steps: First check, if an arabic number equal to a factor is processed correctly (e.g. 1000=M). Then check if an arabic number consisting of two consecutive factors (e.g. 1900=[M,CM]) is processed correctly. Then check, if a number consisting of the same factor twice is processed correctly (e.g. 2000=[M,M]). Finally check, if an arabic number consisting of non-consecutive factors (e.g. 1400=[M,CD]) is processed correctly. I feel I can start an implementation now. If something becomes more complicated than expected I can slow down and repeat this process. 3. Implement First I write a test for the acceptance test cases. It´s red because there´s no implementation even of the API. That´s in conformance with “TDD lore”, I´d say: Next I implement the API: The acceptance test now is formally correct, but still red of course. This will not change even now that I zoom in. Because my goal is not to most quickly satisfy these tests, but to implement my solution in a stepwise manner. That I do by “faking” it: I just “assume” three functions to represent the transformation process of my solution: My hypothesis is that those three functions in conjunction produce correct results on the API-level. I just have to implement them correctly. That´s what I´m trying now – one by one. I start with a simple “detail function”: Translate(). And I start with all the test cases in the obvious equivalence partition: As you can see I dare to test a private method. Yes. That´s a white box test. But as you´ll see it won´t make my tests brittle. It serves a purpose right here and now: it lets me focus on getting one aspect of my solution right. Here´s the implementation to satisfy the test: It´s as simple as possible. Right how TDD wants me to do it: KISS. Now for the second equivalence partition: translating multiple factors. (It´a pattern: if you need to do something repeatedly separate the tests for doing it once and doing it multiple times.) In this partition I just need a single test case, I guess. Stepping up from a single translation to multiple translations is no rocket science: Usually I would have implemented the final code right away. Splitting it in two steps is just for “educational purposes” here. How small your implementation steps are is a matter of your programming competency. Some “see” the final code right away before their mental eye – others need to work their way towards it. Having two tests I find more important. Now for the next low hanging fruit: compilation. It´s even simpler than translation. A single test is enough, I guess. And normally I would not even have bothered to write that one, because the implementation is so simple. I don´t need to test .NET framework functionality. But again: if it serves the educational purpose… Finally the most complicated part of the solution: finding the factors. There are several equivalence partitions. But still I decide to write just a single test, since the structure of the test data is the same for all partitions: Again, I´m faking the implementation first: I focus on just the first test case. No looping yet. Faking lets me stay on a high level of abstraction. I can write down the implementation of the solution without bothering myself with details of how to actually accomplish the feat. That´s left for a drill down with a test of the fake function: There are two main equivalence partitions, I guess: either the first factor is appropriate or some next. The implementation seems easy. Both test cases are green. (Of course this only works on the premise that there´s always a matching factor. Which is the case since the smallest factor is 1.) And the first of the equivalence partitions on the higher level also is satisfied: Great, I can move on. Now for more than a single factor: Interestingly not just one test becomes green now, but all of them. Great! You might say, then I must have done not the simplest thing possible. And I would reply: I don´t care. I did the most obvious thing. But I also find this loop very simple. Even simpler than a recursion of which I had thought briefly during the problem solving phase. And by the way: Also the acceptance tests went green: Mission accomplished. At least functionality wise. Now I´ve to tidy up things a bit. TDD calls for refactoring. Not uch refactoring is needed, because I wrote the code in top-down fashion. I faked it until I made it. I endured red tests on higher levels while lower levels weren´t perfected yet. But this way I saved myself from refactoring tediousness. At the end, though, some refactoring is required. But maybe in a different way than you would expect. That´s why I rather call it “cleanup”. First I remove duplication. There are two places where factors are defined: in Translate() and in Find_factors(). So I factor the map out into a class constant. Which leads to a small conversion in Find_factors(): And now for the big cleanup: I remove all tests of private methods. They are scaffolding tests to me. They only have temporary value. They are brittle. Only acceptance tests need to remain. However, I carry over the single “digit” tests from Translate() to the acceptance test. I find them valuable to keep, since the other acceptance tests only exercise a subset of all roman “digits”. This then is my final test class: And this is the final production code: Test coverage as reported by NCrunch is 100%: Reflexion Is this the smallest possible code base for this kata? Sure not. You´ll find more concise solutions on the internet. But LOC are of relatively little concern – as long as I can understand the code quickly. So called “elegant” code, however, often is not easy to understand. The same goes for KISS code – especially if left unrefactored, as it is often the case. That´s why I progressed from requirements to final code the way I did. I first understood and solved the problem on a conceptual level. Then I implemented it top down according to my design. I also could have implemented it bottom-up, since I knew some bottom of the solution. That´s the leaves of the functional decomposition tree. Where things became fuzzy, since the design did not cover any more details as with Find_factors(), I repeated the process in the small, so to speak: fake some top level, endure red high level tests, while first solving a simpler problem. Using scaffolding tests (to be thrown away at the end) brought two advantages: Encapsulation of the implementation details was not compromised. Naturally private methods could stay private. I did not need to make them internal or public just to be able to test them. I was able to write focused tests for small aspects of the solution. No need to test everything through the solution root, the API. The bottom line thus for me is: Informed TDD produces cleaner code in a systematic way. It conforms to core principles of programming: Single Responsibility Principle and/or Separation of Concerns. Distinct roles in development – being a researcher, being an engineer, being a craftsman – are represented as different phases. First find what, what there is. Then devise a solution. Then code the solution, manifest the solution in code. Writing tests first is a good practice. But it should not be taken dogmatic. And above all it should not be overloaded with purposes. And finally: moving from top to bottom through a design produces refactored code right away. Clean code thus almost is inevitable – and not left to a refactoring step at the end which is skipped often for different reasons.   PS: Yes, I have done this kata several times. But that has only an impact on the time needed for phases 1 and 2. I won´t skip them because of that. And there are no shortcuts during implementation because of that.

  Read the article

• Partner Blog Series: PwC Perspectives - The Gotchas, The Do's and Don'ts for IDM Implementations

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Verdana","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableMediumList1Accent6 {mso-style-name:"Medium List 1 - Accent 6"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:65; mso-style-unhide:no; border-top:solid #E0301E 1.0pt; mso-border-top-themecolor:accent6; border-left:none; border-bottom:solid #E0301E 1.0pt; mso-border-bottom-themecolor:accent6; border-right:none; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Georgia","serif"; color:black; mso-themecolor:text1; mso-ansi-language:EN-GB;} table.MsoTableMediumList1Accent6FirstRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:cell-none; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; font-family:"Arial Narrow","sans-serif"; mso-ascii-font-family:Georgia; mso-ascii-theme-font:major-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:major-fareast; mso-hansi-font-family:Georgia; mso-hansi-theme-font:major-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:major-bidi;} table.MsoTableMediumList1Accent6LastRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; color:#968C6D; mso-themecolor:text2; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6FirstCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:first-column; mso-style-priority:65; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6LastCol {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:last-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #E0301E; mso-tstyle-border-top-themecolor:accent6; mso-tstyle-border-bottom:1.0pt solid #E0301E; mso-tstyle-border-bottom-themecolor:accent6; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableMediumList1Accent6OddColumn {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-column; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} table.MsoTableMediumList1Accent6OddRow {mso-style-name:"Medium List 1 - Accent 6"; mso-table-condition:odd-row; mso-style-priority:65; mso-style-unhide:no; mso-tstyle-shading:#F7CBC7; mso-tstyle-shading-themecolor:accent6; mso-tstyle-shading-themetint:63;} It is generally accepted among business communities that technology by itself is not a silver bullet to all problems, but when it is combined with leading practices, strategy, careful planning and execution, it can create a recipe for success. This post attempts to highlight some of the best practices along with dos & don’ts that our practice has accumulated over the years in the identity & access management space in general, and also in the context of R2, in particular. Best Practices The following section illustrates the leading practices in “How” to plan, implement and sustain a successful OIM deployment, based on our collective experience. Planning is critical, but often overlooked A common approach to planning an IAM program that we identify with our clients is the three step process involving a current state assessment, a future state roadmap and an executable strategy to get there. It is extremely beneficial for clients to assess their current IAM state, perform gap analysis, document the recommended controls to address the gaps, align future state roadmap to business initiatives and get buy in from all stakeholders involved to improve the chances of success. When designing an enterprise-wide solution, the scalability of the technology must accommodate the future growth of the enterprise and the projected identity transactions over several years. Aligning the implementation schedule of OIM to related information technology projects increases the chances of success. As a baseline, it is recommended to match hardware specifications to the sizing guide for R2 published by Oracle. Adherence to this will help ensure that the hardware used to support OIM will not become a bottleneck as the adoption of new services increases. If your Organization has numerous connected applications that rely on reconciliation to synchronize the access data into OIM, consider hosting dedicated instances to handle reconciliation. Finally, ensure the use of clustered environment for development and have at least three total environments to help facilitate a controlled migration to production. If your Organization is planning to implement role based access control, we recommend performing a role mining exercise and consolidate your enterprise roles to keep them manageable. In addition, many Organizations have multiple approval flows to control access to critical roles, applications and entitlements. If your Organization falls into this category, we highly recommend that you limit the number of approval workflows to a small set. Most Organizations have operations managed across data centers with backend database synchronization, if your Organization falls into this category, ensure that the overall latency between the datacenters when replicating the databases is less than ten milliseconds to ensure that there are no front office performance impacts. Ingredients for a successful implementation During the development phase of your project, there are a number of guidelines that can be followed to help increase the chances for success. Most implementations cannot be completed without the use of customizations. If your implementation requires this, it’s a good practice to perform code reviews to help ensure quality and reduce code bottlenecks related to performance. We have observed at our clients that the development process works best when team members adhere to coding leading practices. Plan for time to correct coding defects and ensure developers are empowered to report their own bugs for maximum transparency. Many organizations struggle with defining a consistent approach to managing logs. This is particularly important due to the amount of information that can be logged by OIM. We recommend Oracle Diagnostics Logging (ODL) as an alternative to be used for logging. ODL allows log files to be formatted in XML for easy parsing and does not require a server restart when the log levels are changed during troubleshooting. Testing is a vital part of any large project, and an OIM R2 implementation is no exception. We suggest that at least one lower environment should use production-like data and connectors. Configurations should match as closely as possible. For example, use secure channels between OIM and target platforms in pre-production environments to test the configurations, the migration processes of certificates, and the additional overhead that encryption could impose. Finally, we ask our clients to perform database backups regularly and before any major change event, such as a patch or migration between environments. In the lowest environments, we recommend to have at least a weekly backup in order to prevent significant loss of time and effort. Similarly, if your organization is using virtual machines for one or more of the environments, it is recommended to take frequent snapshots so that rollbacks can occur in the event of improper configuration. Operate & sustain the solution to derive maximum benefits When migrating OIM R2 to production, it is important to perform certain activities that will help achieve a smoother transition. At our clients, we have seen that splitting the OIM tables into their own tablespaces by categories (physical tables, indexes, etc.) can help manage database growth effectively. If we notice that a client hasn’t enabled the Oracle-recommended indexing in the applicable database, we strongly suggest doing so to improve performance. Additionally, we work with our clients to make sure that the audit level is set to fit the organization’s auditing needs and sometimes even allocate UPA tables and indexes into their own table-space for better maintenance. Finally, many of our clients have set up schedules for reconciliation tables to be archived at regular intervals in order to keep the size of the database(s) reasonable and result in optimal database performance. For our clients that anticipate availability issues with target applications, we strongly encourage the use of the offline provisioning capabilities of OIM R2. This reduces the provisioning process for a given target application dependency on target availability and help avoid broken workflows. To account for this and other abnormalities, we also advocate that OIM’s monitoring controls be configured to alert administrators on any abnormal situations. Within OIM R2, we have begun advising our clients to utilize the ‘profile’ feature to encapsulate multiple commonly requested accounts, roles, and/or entitlements into a single item. By setting up a number of profiles that can be searched for and used, users will spend less time performing the same exact steps for common tasks. We advise our clients to follow the Oracle recommended guides for database and application server tuning which provides a good baseline configuration. It offers guidance on database connection pools, connection timeouts, user interface threads and proper handling of adapters/plug-ins. All of these can be important configurations that will allow faster provisioning and web page response times. Many of our clients have begun to recognize the value of data mining and a remediation process during the initial phases of an implementation (to help ensure high quality data gets loaded) and beyond (to support ongoing maintenance and business-as-usual processes). A successful program always begins with identifying the data elements and assigning a classification level based on criticality, risk, and availability. It should finish by following through with a remediation process. Dos & Don’ts Here are the most common dos and don'ts that we socialize with our clients, derived from our experience implementing the solution. Dos Don’ts Scope the project into phases with realistic goals. Look for quick wins to show success and value to the stake holders. Avoid “boiling the ocean” and trying to integrate all enterprise applications in the first phase. Establish an enterprise ID (universal unique ID across the enterprise) earlier in the program. Avoid major UI customizations that require code changes. Have a plan in place to patch during the project, which helps alleviate any major issues or roadblocks (product and database). Avoid publishing all the target entitlements if you don't anticipate their usage during access request. Assess your current state and prepare a roadmap to address your operations, tactical and strategic goals, align it with your business priorities. Avoid integrating non-production environments with your production target systems. Defer complex integrations to the later phases and take advantage of lessons learned from previous phases Avoid creating multiple accounts for the same user on the same system, if there is an opportunity to do so. Have an identity and access data quality initiative built into your plan to identify and remediate data related issues early on. Avoid creating complex approval workflows that would negative impact productivity and SLAs. Identify the owner of the identity systems with fair IdM knowledge and empower them with authority to make product related decisions. This will help ensure overcome any design hurdles. Avoid creating complex designs that are not sustainable long term and would need major overhaul during upgrades. Shadow your internal or external consulting resources during the implementation to build the necessary product skills needed to operate and sustain the solution. Avoid treating IAM as a point solution and have appropriate level of communication and training plan for the IT and business users alike. Conclusion In our experience, Identity programs will struggle with scope, proper resourcing, and more. We suggest that companies consider the suggestions discussed in this post and leverage them to help enable their identity and access program. This concludes PwC blog series on R2 for the month and we sincerely hope that the information we have shared thus far has been beneficial. For more information or if you have questions, you can reach out to Rex Thexton, Senior Managing Director, PwC and or Dharma Padala, Director, PwC. We look forward to hearing from you. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0in; line-height:12.0pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Arial","sans-serif"; mso-ascii-font-family:Arial; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Arial; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL).

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by jao

  On a windows 2003 server I can nslookup www.google.com which returns Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: www.l.google.com Addresses: 74.125.79.104, 74.125.79.147, 74.125.79.99 Aliases: www.google.com I can then ping 74.125.79.104: Pinging 74.125.79.104 with 32 bytes of data: Reply from 74.125.79.104: bytes=32 time=16ms TTL=54 Reply from 74.125.79.104: bytes=32 time=32ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Ping statistics for 74.125.79.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 32ms, Average = 19ms But I cannot ping www.google.com: Ping request could not find host www.google.com. Please check the name and try again. (this one is different from the other question in that this one has a TLD, it is not a local domain.) Update: I am running a dns server at localhost (127.0.0.1). Even when I change it to use for example opendns, it still can nslookup hostname and ping ip address, but not ping hostname. So what is wrong? Update 2: here is the ipconfig /all result: Windows IP Configuration Host Name . . . . . . . . . . . . : SERVER Primary Dns Suffix . . . . . . . : NETWORK.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : NETWORK.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-0F-1F-56-3B-AA DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.7.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.7.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 Update 3: Thanks everyone for their help and suggestions. I appreciate that. Ipconfig /flushdns returns: Sucessfully flushed the DNS resolver cache Ipconfig /displaydns returns: 2.7.168.192.in-addr.arpa ---------------------------------------- Record Name . . . . . : 2.7.168.192.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : webserver.mydomainname.com 1.0.0.127.in-addr.arpa ---------------------------------------- Record Name . . . . . : 1.0.0.127.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : localhost Update 4: Wireshark shows the following: 3 11.540542 208.67.220.220 192.168.7.2 DNS Standard query response A 74.125.79.99 A 74.125.79.104 A 74.125.79.147 6 42.056794 192.168.7.2 192.168.7.255 NBNS Name query NB WWW.GOOGLE.COM<00> which is weird: when I ping, it sends a packet to 192.168.7.255 instead of asking the DNS server for an address

  Read the article

• High Load mysql on Debian server stops every day. Why?

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

  Read the article

• Unicenter Software Delivery 4 not able to connect to MS SQL 2000 Database after W2003 SP2 upgrade

  - by grub

  Hello Everyone Yesterday I installed the Windows Server 2003 Service Pack 2 on a Windows Server 2003 which has Unicenter Software Delivery 4 installed. Prior to the installation I disabled every CA service on the server (Brightstor, SDO , RCO, TNG) and the MS SQL 2000 service. After the installation of the SP2 I enabled the services again but the Unicenter Service is not able to connect to the MS SQL 2000 Database anymore. The database itself is up and running and I can connect to it with the Enterprise Manager. A dbcc checkdb doesnt return any errors on the Unicenter database. The Unicenter service throws the following error messages during startup: IM[1] 27/05 10:38:31,272 Installation Manager in init phase IM[1] 27/05 10:38:31,694 Process IM(L) - [004152] failed to open database SDDATA. dbopen() call failed. IM[1] 27/05 10:38:31,694 sqls error details: IM[1] 27/05 10:38:31,694 (null) IM[1] 27/05 10:38:32,069 ##EXCEPTION## TableError T@:PS_SQLS\isam_db.cxx:744. IM[1] 27/05 10:38:32,069 ##EXCEPTION## TableError C@:TaskmgrL\ASMTML.CXX:596. IM[1] 27/05 10:38:32,069 ##EXCEPTION## ErrorCode: 4711 in SDDATA:Isam::Isam. Process IM(L) - [004152] failed to open database SDDATA. dbopen() call failed. IM[1] 27/05 10:38:32,069 sqls error details: IM[1] 27/05 10:38:32,069 (null) IM[1] 27/05 10:38:32,069 returned 0. IM[1] 27/05 10:38:32,084 Persistent Storage could not be opened. Error cause is found in the ASM Event Log. Restart Task Manager. IM[1] 27/05 10:38:32,084 Failed to open database. IM[1] 27/05 10:38:32,084 Installation Manager ends> If I check the Unicenter configutation with *chkmib_l* the tool throws an exception and creates a small dump file. An Exception Occurred: Time: 27/05 09:49:38,928 Reason: ChkMIB_l.exe caused an UNKNOWN_EXCEPTION in module kernel32.dll at 7C82001B:77E4BEE7 Registers: EAX=0012F908 EBX=00000000 ECX=00000000 EDX=02410004 ESI=0012F998 EDI=0012F998 EBP=0012F958 ESP=0012F904 EIP=77E4BEE7 FLG=00000206 CS =7C82001B DS =B90023 SS =120023 ES =120023 FS =7C82003B GS =3F0000 Call Stack: 7C82001B:77E4BEE7 (0xE06D7363 0x00000001 0x00000003 0x0012F98C) kernel32.dll 7C82001B:77BB3259 (0x0012F9B8 0x2B017C50 0x2B024404 0x00B68C98) MSVCRT.dll 7C82001B:2B010C42 (0x00020003 0x010C00FE 0x003F0190 0x00B69050) PS.dll << SOFTWARE DELIVERY INSTANCE INFO >> TRIGGER 0(1) instances: JCE 0(1) instances: TM 0(1) instances: IM 0(1) instances: DM 0(1) instances: DPU 0(71) instances: NATF 0(1) instances: MIBCONV 0(0) instances: API 0(4) instances: DTSFT 0(0) instances: TNGPOP 0(0) instances: DGATE 0(0) instances: << FLUSHING MEMORY TRACES >> << STOP FLUSHING MEMORY TRACES >> I compared the configuration of the SDO service and the system configuration with another server on which the Windows Server 2003 SP2 is installed and SDO is working. The configuration is the same and the same driver and software versions are used. Do you have any idea what causes the connection issue? Should I deinstall the unicenter service and make a fresh installation on the server or should I remove the Windows Server 2003 SP2? I don't want to remove the SP2 because it's a requirement for WSUS3 SP2 and I really don't want to know how many possible exploits are possible in such an old system ;-) Thank you very much and have a nice day. Below you can find more detailed information about the system and the SDO service. psinfo output (system information) System information for \\CZZAAS1003: Uptime: 0 days 14 hours 38 minutes 50 seconds Kernel version: Microsoft Windows Server 2003, Multiprocessor Free Product type: Standard Edition Product version: 5.2 Service pack: 2 Kernel build number: 3790 Install date: 23.9.2004, 11:16:11s IE version: 6.0000 System root: C:\WINDOWS Processors: 2 Processor speed: 2.3 GHz Processor type: Intel(R) Xeon(TM) CPU Physical memory: 1024 MB Video driver: RAGE XL PCI Family (Microsoft Corporation) sdver output (Unicenter Software delivery version) Unicenter Software Delivery 4.0 SP1 I2 ENU [2901] Copyright 2004 Computer Associates International, Incorporated ms sql 2000 version and odbc driver version MS SQL 2000 Server Standard Edition Product Version: 8.00.760 (SP3) ODBC Driver: SQL Server - Version 2000.86.3959.00 complete Unicenter Software delivery service log file TRIGGER[1] 27/05 10:38:28,366 SD Trigger Agent has started NATF[1] 27/05 10:38:28,928 Initiation phase finished IM[1] 27/05 10:38:31,272 Installation Manager in init phase IM[1] 27/05 10:38:31,694 Process IM(L) - [004152] failed to open database SDDATA. dbopen() call failed. IM[1] 27/05 10:38:31,694 sqls error details: IM[1] 27/05 10:38:31,694 (null) IM[1] 27/05 10:38:32,069 ##EXCEPTION## TableError T@:PS_SQLS\isam_db.cxx:744. IM[1] 27/05 10:38:32,069 ##EXCEPTION## TableError C@:TaskmgrL\ASMTML.CXX:596. IM[1] 27/05 10:38:32,069 ##EXCEPTION## ErrorCode: 4711 in SDDATA:Isam::Isam. Process IM(L) - [004152] failed to open database SDDATA. dbopen() call failed. IM[1] 27/05 10:38:32,069 sqls error details: IM[1] 27/05 10:38:32,069 (null) IM[1] 27/05 10:38:32,069 returned 0. IM[1] 27/05 10:38:32,084 Persistent Storage could not be opened. Error cause is found in the ASM Event Log. Restart Task Manager. IM[1] 27/05 10:38:32,084 Failed to open database. IM[1] 27/05 10:38:32,084 Installation Manager ends TM[1] 27/05 10:38:32,116 Task Manager in init phase TM[1] 27/05 10:38:32,334 Process TM(L) - [006132] failed to open database SDDATA. dbopen() call failed. TM[1] 27/05 10:38:32,334 sqls error details: TM[1] 27/05 10:38:32,334 (null) TM[1] 27/05 10:38:32,381 ##EXCEPTION## TableError T@:PS_SQLS\isam_db.cxx:744. TM[1] 27/05 10:38:32,381 ##EXCEPTION## TableError C@:TaskmgrL\ASMTML.CXX:596. TM[1] 27/05 10:38:32,381 ##EXCEPTION## ErrorCode: 4711 in SDDATA:Isam::Isam. Process TM(L) - [006132] failed to open database SDDATA. dbopen() call failed. TM[1] 27/05 10:38:32,381 sqls error details: TM[1] 27/05 10:38:32,381 (null) TM[1] 27/05 10:38:32,381 returned 0. TM[1] 27/05 10:38:32,381 Persistent Storage could not be opened. Error cause is found in the ASM Event Log. Restart Task Manager. TM[1] 27/05 10:38:32,381 Failed to open database. TM[1] 27/05 10:38:32,381 Task Manager ends DM[1] 27/05 10:38:33,272 Dialogue Manager is now active API[1] 27/05 10:38:34,397 API Server Process in init phase API[1] 27/05 10:38:34,397 API - SDNLS_Init API[1] 27/05 10:38:34,397 API - connectEM API[1] 27/05 10:38:34,412 API - apiServ.init DM[1] 27/05 10:38:34,678 **AND** 1 Agents triggered API[1] 27/05 10:38:34,709 Process API(L) - [005680] failed to open database SDDATA. dbopen() call failed. API[1] 27/05 10:38:34,709 sqls error details: API[1] 27/05 10:38:34,709 (null) API[1] 27/05 10:38:34,756 ##EXCEPTION## TableError T@:PS_SQLS\isam_db.cxx:744. API[1] 27/05 10:38:34,756 ##EXCEPTION## TableError C@:MainAPIL\APISERVL.CXX:246. API[1] 27/05 10:38:34,756 ##EXCEPTION## ErrorCode: 4711 in SDDATA:Isam::Isam. Process API(L) - [005680] failed to open database SDDATA. dbopen() call failed. API[1] 27/05 10:38:34,756 sqls error details: API[1] 27/05 10:38:34,756 (null) API[1] 27/05 10:38:34,756 returned 0. API[1] 27/05 10:38:34,756 Open of the database failed. API[1] 27/05 10:38:34,756 API - apiServ.init complete API[1] 27/05 10:38:34,756 API - start_APIServer DM[1] 27/05 10:38:34,803 CZZAAR1037 DPU[1:CZZAAR1037] 27/05 10:38:35,772 DPU in init phase DPU[1:CZZAAR1037] 27/05 10:38:36,100 >> GetManagerData DPU[1:CZZAAR1037] 27/05 10:38:36,287 >> SetCompInfo DPU[1:CZZAAR1037] 27/05 10:38:36,334 >> GetContainerList DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6ad DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6ad DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6b7 DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6b7 DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6c1 DPU[1:CZZAAR1037] 27/05 10:38:36,350 getJobState 3 from 5b6c1 DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b6cb DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b6cb DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b6f9 DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b6f9 DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b71a DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b71a DPU[1:CZZAAR1037] 27/05 10:38:36,366 getJobState 3 from 5b724 DPU[1:CZZAAR1037] 27/05 10:38:36,381 getJobState 3 from 5b724 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b72e DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b72e DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b738 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b738 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b742 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b742 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b74c DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b74c DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b756 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b756 DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b78a DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b78a DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b7af DPU[1:CZZAAR1037] 27/05 10:38:36,397 getJobState 3 from 5b7af DPU[1:CZZAAR1037] 27/05 10:38:36,522 >> SetCompAttr DPU[1:CZZAAR1037] 27/05 10:38:36,569 >> SetDetected DPU[1:CZZAAR1037] 27/05 10:38:36,584 disconnect DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b6ad DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b6b7 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b6c1 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b6cb DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b6f9 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b71a DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b724 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b72e DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b738 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b742 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b74c DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b756 DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b78a DPU[1:CZZAAR1037] 27/05 10:38:36,584 getJobState 3 from 5b7af DPU[1:CZZAAR1037] 27/05 10:38:36,584 DPU ends DM[1] 27/05 10:38:38,006 **AND** 0 Agents triggered JCE[1] 27/05 10:38:38,053 JCE starts DM[1] 27/05 10:38:38,287 CZZAAS1003 DPU[2:CZZAAS1003] 27/05 10:38:38,412 DPU in init phase DPU[2:CZZAAS1003] 27/05 10:38:38,647 >> GetManagerData DPU[2:CZZAAS1003] 27/05 10:38:38,756 >> SetCompInfo DPU[2:CZZAAS1003] 27/05 10:38:38,787 >> GetContainerList DM[1] 27/05 10:38:38,850 **AND** 1 Agents triggered DM[1] 27/05 10:38:38,928 CZZAAR1124 DPU[3:CZZAAR1124] 27/05 10:38:39,053 DPU in init phase DPU[3:CZZAAR1124] 27/05 10:38:39,272 >> GetManagerData DM[1] 27/05 10:38:39,334 **AND** 1 Agents triggered DPU[3:CZZAAR1124] 27/05 10:38:39,381 >> SetCompInfo DPU[3:CZZAAR1124] 27/05 10:38:39,412 >> GetContainerList DM[1] 27/05 10:38:39,412 CZZAAR1125 DPU[3:CZZAAR1124] 27/05 10:38:39,428 getJobState 3 from 5b88e DPU[3:CZZAAR1124] 27/05 10:38:39,428 getJobState 3 from 5b88e DPU[2:CZZAAS1003] 27/05 10:38:39,491 >> SetCompAttr DPU[3:CZZAAR1124] 27/05 10:38:39,522 >> SetCompAttr DPU[4:CZZAAR1125] 27/05 10:38:39,522 DPU in init phase DPU[3:CZZAAR1124] 27/05 10:38:39,584 >> SetDetected DPU[2:CZZAAS1003] 27/05 10:38:39,584 >> SetDetected DPU[3:CZZAAR1124] 27/05 10:38:39,584 disconnect DPU[3:CZZAAR1124] 27/05 10:38:39,600 getJobState 3 from 5b88e DPU[3:CZZAAR1124] 27/05 10:38:39,600 DPU ends DPU[2:CZZAAS1003] 27/05 10:38:39,631 disconnect DPU[2:CZZAAS1003] 27/05 10:38:39,631 DPU ends DPU[4:CZZAAR1125] 27/05 10:38:39,756 >> GetManagerData DPU[4:CZZAAR1125] 27/05 10:38:39,850 >> SetCompInfo DPU[4:CZZAAR1125] 27/05 10:38:39,881 >> GetContainerList DPU[4:CZZAAR1125] 27/05 10:38:39,897 getJobState 3 from 5b8a9 DPU[4:CZZAAR1125] 27/05 10:38:39,897 getJobState 3 from 5b8a9 DPU[4:CZZAAR1125] 27/05 10:38:39,991 >> SetCompAttr DPU[4:CZZAAR1125] 27/05 10:38:40,100 >> SetDetected DPU[4:CZZAAR1125] 27/05 10:38:40,116 disconnect DPU[4:CZZAAR1125] 27/05 10:38:40,116 getJobState 3 from 5b8a9 DPU[4:CZZAAR1125] 27/05 10:38:40,116 DPU ends DM[1] 27/05 10:38:40,741 **AND** 0 Agents triggered JCE[1] 27/05 10:38:42,756 JCE ends DM[1] 27/05 10:38:47,475 **AND** 0 Agents triggered DM[1] 27/05 10:38:54,241 **AND** 0 Agents triggered

  Read the article

• Unstable DNS with bind

  - by yasser abd

  we have a Centos machine called jupiter, on which I have installed bind9, On every other machine the DNS is set to be the IP address of jupiter (192.168.2.101), as you can see in the output of the following command in windows >ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : mypcs Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller Physical Address. . . . . . . . . : 00-1A-A0-AC-E4-CC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::c16d:3ae4:5907:30c4%8(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.2.98(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Thursday, September 20, 2012 10:26:11 AM Lease Expires . . . . . . . . . . : Sunday, September 23, 2012 10:26:10 AM Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DHCPv6 IAID . . . . . . . . . . . : 201333408 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-3A-50-01-00-1A-A0-AC-E4-CC DNS Servers . . . . . . . . . . . : 192.168.2.101 192.168.2.1 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled All machines can always nslookup one of the domain (mydomain.com) that is set in the jupiter's DNS server, you can see that in the output of nslookup on the same windows machine: >nslookup mydomain.com Server: UnKnown Address: 192.168.2.101 Name: mydomain.com Address: 192.168.2.100 The problem is, sometimes mydomain.com can not be pinged, here is the output of the ping on the same windows machine >ping mydomain.com Ping request could not find host mydomain.com. Please check the name and try again. This looks very random, and happens once in a while, so the machine can lookup the DNS records but can't ping it, nor can browse the website that is hosted on mydomain.com, which should resolve to 192.168.2.100 On a linux machine that has the same DNS settings, the output of dig command for mydomain is as follows: $ dig mydomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.2 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 36090 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1 ;; QUESTION SECTION: ;mydomain.com. IN A ;; ANSWER SECTION: mydomain.com. 86400 IN A 192.168.2.100 ;; AUTHORITY SECTION: mydomain.com. 86400 IN NS jupiter. ;; ADDITIONAL SECTION: jupiter. 86400 IN A 192.168.2.101 ;; Query time: 1 msec ;; SERVER: 192.168.2.101#53(192.168.2.101) ;; WHEN: Thu Sep 20 16:32:14 2012 ;; MSG SIZE rcvd: 83 We've never had the same problem on MACs, they always resolve mydomain.com Here is how I have defined mydomain.com on Bind9's configs on Jupiter, notice that the name of the machine on 192.168.2.100 is venus, so I have this file: /var/named/named.venus: $TTL 1D @ IN SOA jupiter. admin.ourcompany.com. ( 2003052800 ; serial 86400 ; refresh 300 ; retry 604800 ; expire 3600 ; minimum ) @ IN NS jupiter. @ IN A 192.168.2.100 * IN A 192.168.2.100 /var/named/zones/named.venus.zone zone "mydomain.com" IN {type master;file "/var/named/named.venus";allow-update {none;};}; One thing to note is that I haven't defined reverse DNS lookups, only the forward DNS lookups are defined in Bind9 configs, not sure if that's relevant or not. So my question is, why is this being so unstable? what could be the cause?

  Read the article

• Web Application Problems (web.config errors) HTTP 500.19 with IIS7.5 and ASP.NET v2

  - by Django Reinhardt

  This is driving the whole team crazy. There must be some simple mis-configured part of IIS or our Web Server, but every time we try to run out ASP.NET Web Application on IIS 7.5 we get the following error... Here's the error in full: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. `Detailed Error Information` Module IIS Web Core Notification Unknown Handler Not yet determined Error Code 0x8007000d Config Error Config File \\?\E:\wwwroot\web.config Requested URL http://localhost:80/Default.aspx Physical Path Logon Method Not yet determined Logon User Not yet determined Config Source -1: 0: The machine is running Windows Server 2008 R2. We're developing our Web Application using Visual Studio 2008. According to Microsoft the code 8007000d means there's a syntax error in our web.config -- except the project builds and runs fine locally. Looking at the web.config in XML Notepad doesn't bring up any syntax errors, either. I'm assuming it must be some sort of poor configuration on my part...? Does anyone know where I might find further information about the error? Nothing is showing in EventViewer, either :( Not sure what else would be helpful to mention... Assistance is greatly appreciated. Thanks! UPDATES! - POSTED WEB.CONFIG BELOW Ok, since I posted the original question above, I've tracked down the precise lines in the web.config that were causing the error. Here are the lines (they appear between <System.webServer> tags)... <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </httpHandlers> Note: If I delete the lines between the <httpHandlers> I STILL get the error. I literally have to delete <httpHandlers> (and the lines inbetween) to stop getting the above error. Once I've done this I get a new 500.19 error, however. Thankfully, this time IIS actually tells me which bit of the web.config is causing a problem... <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory,System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </handlers> Looking at these lines it's clear the problem has migrated further within the same <system.webServer> tag to the <handlers> tag. The new error is also more explicit and specifically complains that it doesn't recognize the attribute "validate" (as seen on the third line above). Removing this attribute then makes it complain that the same line doesn't have the required "name" attribute. Adding this attribute then brings up ASP.NET error... Could not load file or assembly 'System.web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56' or one of its dependencies. The system cannot find the file specified. Obviously I think these new errors have just arisen from me deleting the <httpHandlers> tags in the first place -- they're obviously needed by the application -- so the question remains: Why would these tags kick up an error in IIS in the first place??? Do I need to install something to IIS to make it work with them? Thanks again for any help. WEB.CONFIG Here's the troublesome bits of our web.Config... I hope this helps someone find our problem! <system.Web> <!-- stuff cut out --> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </httpModules> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </modules> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory,System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </handlers> </system.webServer>

  Read the article

• Android WebView not loading a JavaScript file, but Android Browser loads it fine.

  - by Justin

  I'm writing an application which connects to a back office site. The backoffice site contains a whole slew of JavaScript functions, at least 100 times the average site. Unfortunately it does not load them, and causes much of the functionality to not work properly. So I am running a test. I put a page out on my server which loads the FireBugLite javascript text. Its a lot of javascript and perfect to test and see if the Android WebView will load it. The WebView loads nothing, but the browser loads the Firebug Icon. What on earth would make the difference, why can it run in the browser and not in my WebView? Any suggestions. More background information, in order to get the stinking backoffice application available on a Droid (or any other platform except windows) I needed to trick the bakcoffice application to believe what's accessing the website is Internet Explorer. I do this by modifying the WebView User Agent. Also for this application I've slimmed my landing page, so I could give you the source to offer me aid. package ksc.myKMB; import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.app.ProgressDialog; import android.content.DialogInterface; import android.graphics.Bitmap; import android.os.Bundle; import android.view.Menu; import android.view.MenuInflater; import android.view.MenuItem; import android.view.Window; import android.webkit.WebChromeClient; import android.webkit.WebView; import android.webkit.WebSettings; import android.webkit.WebViewClient; import android.widget.Toast; public class myKMB extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); /** Performs base set up */ /** Create a Activity of this Activity, IE myProcess */ myProcess = this; /*** Create global objects and web browsing objects */ HideDialogOnce = true; webview = new WebView(this) { }; webChromeClient = new WebChromeClient() { public void onProgressChanged(WebView view, int progress) { // Activities and WebViews measure progress with different scales. // The progress meter will automatically disappear when we reach 100% myProcess.setProgress((progress * 100)); //CreateMessage("Progress is : " + progress); } }; webViewClient = new WebViewClient() { public void onReceivedError(WebView view, int errorCode, String description, String failingUrl) { Toast.makeText(myProcess, MessageBegText + description + MessageEndText, Toast.LENGTH_SHORT).show(); } public void onPageFinished (WebView view, String url) { /** Hide dialog */ try { // loadingDialog.dismiss(); } finally { } //myProcess.setProgress(1000); /** Fon't show the dialog while I'm performing fixes */ //HideDialogOnce = true; view.loadUrl("javascript:document.getElementById('JTRANS011').style.visibility='visible';"); } public void onPageStarted(WebView view, String url, Bitmap favicon) { if (HideDialogOnce == false) { //loadingDialog = ProgressDialog.show(myProcess, "", // "One moment, the page is laoding...", true); } else { //HideDialogOnce = true; } } }; getWindow().requestFeature(Window.FEATURE_PROGRESS); webview.setWebChromeClient(webChromeClient); webview.setWebViewClient(webViewClient); setContentView(webview); /** Load the Keynote Browser Settings */ LoadSettings(); webview.loadUrl(LandingPage); } /** Get Menu */ @Override public boolean onCreateOptionsMenu(Menu menu) { MenuInflater inflater = getMenuInflater(); inflater.inflate(R.menu.menu, menu); return true; } /** an item gets pushed */ @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { // We have only one menu option case R.id.quit: System.exit(0); break; case R.id.back: webview.goBack(); case R.id.refresh: webview.reload(); case R.id.info: //IncludeJavascript(""); } return true; } /** Begin Globals */ public WebView webview; public WebChromeClient webChromeClient; public WebViewClient webViewClient; public ProgressDialog loadingDialog; public Boolean HideDialogOnce; public Activity myProcess; public String OverideUserAgent_IE = "Mozilla/5.0 (Windows; MSIE 6.0; Android 1.6; en-US) AppleWebKit/525.10+ (KHTML, like Gecko) Version/3.0.4 Safari/523.12.2 myKMB/1.0"; public String LandingPage = "http://kscserver.com/main-leap-slim.html"; public String MessageBegText = "Problem making a connection, Details: "; public String MessageEndText = " For Support Call: (xxx) xxx - xxxx."; public void LoadSettings() { webview.getSettings().setUserAgentString(OverideUserAgent_IE); webview.getSettings().setJavaScriptEnabled(true); webview.getSettings().setBuiltInZoomControls(true); webview.getSettings().setSupportZoom(true); } /** Creates a message alert dialog */ public void CreateMessage(String message) { AlertDialog.Builder builder = new AlertDialog.Builder(this); builder.setMessage(message) .setCancelable(true) .setNegativeButton("Close", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { dialog.cancel(); } }); AlertDialog alert = builder.create(); alert.show(); } } My Application is running in the background, and as you can see no Firebug in the lower right hand corner. However the browser (the emulator on top) has the same page but shows the firebug. What am I doing wrong? I'm assuming its either not enough memory allocated to the application, process power allocation, or a physical memory thing. I can't tell, all I know is the results are strange. I get the same thing form my android device, the application shows no firebug but the browser shows the firebug.

  Read the article

• Why is my WCF Rest Service on IIS7 Authenticating TWICE!?!?

  - by TheAggie

  Ok, if someone could shed some light on this for me, I would greatly appreciate it. So here we go. I had a rest service running fine the other day but after I accidentally overwrote the web.config all hell broke loose. I've spent the past day and a half trying to sort things out but I can't seem to figure out what is missing or misplaced. So, I've designed this service around WCF Rest Contrib (http://wcfrestcontrib.codeplex.com)'s authentication process. Now, I can get this working fine on my localhost w/ the current web.config (minus the endpoint entry) but once I upload it to discountasp and select "basic authorization" in the ISS7 Manager, it appears that I'm getting authenticated twice! Once using my discount asp.net user/pass and then the next time using the application user/pass. Unfortunately I only provide one set of credentials and don't want to hard code my discountasp account info into the app. Like I said before, this worked fine a few days ago. Anyway. here is my web.config as it is now: <?xml version="1.0"?> <configuration> <connectionStrings> <add name="SQL2008_ConnectionString" connectionString="Data Source=sql2k8xx.discountasp.net;Initial Catalog=SQL2008_xx;Persist Security Info=True;User ID=SQL2008_xx_user;Password=myPass" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <httpRuntime maxRequestLength="204800" executionTimeout="3600"/> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation> <httpModules> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ServiceAnonymityModule"/> <add name="ServiceAnonymityModule" type="WcfRestContrib.Web.ServiceAnonymityModule, WcfRestContrib"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> </handlers> </system.webServer> <system.diagnostics> <trace autoflush="true" /> </system.diagnostics> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="false"> <baseAddressPrefixFilters> <add prefix="http://www.mydomain.com/myServiceBaseAddress"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <extensions> <behaviorExtensions> <add name="webAuthentication" type="WcfRestContrib.ServiceModel.Configuration.WebAuthentication.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="errorHandler" type="WcfRestContrib.ServiceModel.Configuration.ErrorHandler.BehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webFormatter" type="WcfRestContrib.ServiceModel.Configuration.WebDispatchFormatter.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> <add name="webErrorHandler" type="WcfRestContrib.ServiceModel.Configuration.WebErrorHandler.ConfigurationBehaviorElement, WcfRestContrib, Version=1.0.5.0, Culture=neutral, PublicKeyToken=89183999a8dc93b5"/> </behaviorExtensions> </extensions> <bindings> <customBinding> <binding name="HttpStreamedRest"> <httpTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> <binding name="HttpsStreamedRest"> <httpsTransport maxReceivedMessageSize="209715200" manualAddressing="true" /> </binding> </customBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="Rest"> <webAuthentication requireSecureTransport="false" authenticationHandlerType="WcfRestContrib.ServiceModel.Dispatcher.WebBasicAuthenticationHandler, WcfRestContrib" usernamePasswordValidatorType="MyLibrary.Runtime.SecurityValidator, MyLibrary" source="MyRESTServiceRealm"/> <webFormatter> <formatters defaultMimeType="application/xml"> <formatter mimeTypes="application/xml,text/xml" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.PoxDataContract, WcfRestContrib"/> <formatter mimeTypes="application/json" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.DataContractJson, WcfRestContrib"/> <formatter mimeTypes="application/x-www-form-urlencoded" type="WcfRestContrib.ServiceModel.Dispatcher.Formatters.FormUrlEncoded, WcfRestContrib"/> </formatters> </webFormatter> <errorHandler errorHandlerType="WcfRestContrib.ServiceModel.Web.WebErrorHandler, WcfRestContrib"/> <webErrorHandler returnRawException="true" logHandlerType="MyLibrary.Runtime.LogHandler, MyLibrary" unhandledErrorMessage="An error has occured processing your request. Please contact technical support for further assistance."/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> So, whenever I upload this and change the ISS setting to Basic Authentication, it looks like it is trying to use the default handler for authentication as if I try to enter my web app user/pass, I get an error screen which has the following detailed information about the moduel/handler Detailed Error Information Module: IIS Web Core Notification: AuthenticateRequest Handler: svc-ISAPI-2.0 Error Code: 0x80070005 Requested URL: http://www.mydomain.com:80/MyService.../MyService.svc Physical Path: E:\web\xxxxxx\htdocs\MyServiceBaseAddress\MyService.svc Logon Method: Not yet determined Logon User: Not yet determined Now for the fun stuff... i tried providing my discountasp.net account username/password for kicks and sure enough it responded properly for any [OperationContract] which doesn't have [OperationAuthentication] defined (which is only one or two of the operations I have). I thought this was strange, so I looked at fiddler and saw something interesting. Whenever I try request a procedure with [OperationAuthentication] defined and provide my discountasp.net username/pass I get two different "WWW-Authenticate" headers back in Fiddler: WWW-Authenticate: Basic realm="MyRESTServiceRealm" WWW-Authenticate: Basic realm="www.mydomain.com" On the other hand, if I try to access the same procedures with only my application's user/pass, I only get the site's header: WWW-Authenticate: Basic realm="www.mydomain.com" My hypothesis is that for some reason I'm having to pass through the default "Basic Authorization" layer set by IIS before I can get to the application's "Custom Basic Authorization" layer. After verifying this by created an identical user/pass for my service that I use for my discountasp.net account, I was able to successfully pass both layers of authentication without any issues... so I think I can conclude that this is indeed the issue. Now how do I disable the default one? Do I need to do this in the IIS Manager, or in the web.config? Anyway, I have absolutely no idea how this is possible or what I need to do to resolve the issue, but I know that something is seriously out of whack. Any suggestions would be greatly appreciated! Thanks.

  Read the article

• Passing XML markers to Google Map

  - by djmadscribbler

  I've been creating a V3 Google map based on this example from Mike Williams http://www.geocodezip.com/v3_MW_example_map3.html I've run into a bit of a problem though. If I have no parameters in my URL then I get the error "id is undefined idmarkers [id.toLowerCase()] = marker;" in Firebug and only one marker will show up. If I have a parameter (?id=105 for example) then all the sidebar links say 105 (or whatever the parameter in the URL was) instead of their respective label as listed in the XML file and a random infowindow will be opened instead of the window for the id in the URL. Here is my javascript: var map = null; var lastmarker = null; // ========== Read paramaters that have been passed in ========== // Before we go looking for the passed parameters, set some defaults // in case there are no parameters var id; var index = -1; // these set the initial center, zoom and maptype for the map // if it is not specified in the query string var lat = 42.194741; var lng = -121.700301; var zoom = 18; var maptype = google.maps.MapTypeId.HYBRID; function MapTypeId2UrlValue(maptype) { var urlValue = 'm'; switch (maptype) { case google.maps.MapTypeId.HYBRID: urlValue = 'h'; break; case google.maps.MapTypeId.SATELLITE: urlValue = 'k'; break; case google.maps.MapTypeId.TERRAIN: urlValue = 't'; break; default: case google.maps.MapTypeId.ROADMAP: urlValue = 'm'; break; } return urlValue; } // If there are any parameters at eh end of the URL, they will be in location.search // looking something like "?marker=3" // skip the first character, we are not interested in the "?" var query = location.search.substring(1); // split the rest at each "&" character to give a list of "argname=value" pairs var pairs = query.split("&"); for (var i = 0; i < pairs.length; i++) { // break each pair at the first "=" to obtain the argname and value var pos = pairs[i].indexOf("="); var argname = pairs[i].substring(0, pos).toLowerCase(); var value = pairs[i].substring(pos + 1).toLowerCase(); // process each possible argname - use unescape() if theres any chance of spaces if (argname == "id") { id = unescape(value); } if (argname == "marker") { index = parseFloat(value); } if (argname == "lat") { lat = parseFloat(value); } if (argname == "lng") { lng = parseFloat(value); } if (argname == "zoom") { zoom = parseInt(value); } if (argname == "type") { // from the v3 documentation 8/24/2010 // HYBRID This map type displays a transparent layer of major streets on satellite images. // ROADMAP This map type displays a normal street map. // SATELLITE This map type displays satellite images. // TERRAIN This map type displays maps with physical features such as terrain and vegetation. if (value == "m") { maptype = google.maps.MapTypeId.ROADMAP; } if (value == "k") { maptype = google.maps.MapTypeId.SATELLITE; } if (value == "h") { maptype = google.maps.MapTypeId.HYBRID; } if (value == "t") { maptype = google.maps.MapTypeId.TERRAIN; } } } // this variable will collect the html which will eventually be placed in the side_bar var side_bar_html = ""; // arrays to hold copies of the markers and html used by the side_bar // because the function closure trick doesnt work there var gmarkers = []; var idmarkers = []; // global "map" variable var map = null; // A function to create the marker and set up the event window function function createMarker(point, icon, label, html) { var contentString = html; var marker = new google.maps.Marker({ position: point, map: map, title: label, icon: icon, zIndex: Math.round(point.lat() * -100000) << 5 }); marker.id = id; marker.index = gmarkers.length; google.maps.event.addListener(marker, 'click', function () { lastmarker = new Object; lastmarker.id = marker.id; lastmarker.index = marker.index; infowindow.setContent(contentString); infowindow.open(map, marker); }); // save the info we need to use later for the side_bar gmarkers.push(marker); idmarkers[id.toLowerCase()] = marker; // add a line to the side_bar html side_bar_html += '<a href="javascript:myclick(' + (gmarkers.length - 1) + ')">' + id + '<\/a><br>'; } // This function picks up the click and opens the corresponding info window function myclick(i) { google.maps.event.trigger(gmarkers[i], "click"); } function makeLink() { var mapinfo = "lat=" + map.getCenter().lat().toFixed(6) + "&lng=" + map.getCenter().lng().toFixed(6) + "&zoom=" + map.getZoom() + "&type=" + MapTypeId2UrlValue(map.getMapTypeId()); if (lastmarker) { var a = "/about/map/default.aspx?id=" + lastmarker.id + "&" + mapinfo; var b = "/about/map/default.aspx?marker=" + lastmarker.index + "&" + mapinfo; } else { var a = "/about/map/default.aspx?" + mapinfo; var b = a; } document.getElementById("idlink").innerHTML = '<a href="' + a + '" id=url target=_new>- Link directly to this page by id</a> (id in xml file also entry &quot;name&quot; in sidebar menu)'; document.getElementById("indexlink").innerHTML = '<a href="' + b + '" id=url target=_new>- Link directly to this page by index</a> (position in gmarkers array)'; } function initialize() { // create the map var myOptions = { zoom: zoom, center: new google.maps.LatLng(lat, lng), mapTypeId: maptype, mapTypeControlOptions: { style: google.maps.MapTypeControlStyle.DROPDOWN_MENU }, navigationControl: true, mapTypeId: google.maps.MapTypeId.HYBRID }; map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); var stylesarray = [ { featureType: "poi", elementType: "labels", stylers: [ { visibility: "off" } ] }, { featureType: "landscape.man_made", elementType: "labels", stylers: [ { visibility: "off" } ] } ]; var options = map.setOptions({ styles: stylesarray }); // Make the link the first time when the page opens makeLink(); // Make the link again whenever the map changes google.maps.event.addListener(map, 'maptypeid_changed', makeLink); google.maps.event.addListener(map, 'center_changed', makeLink); google.maps.event.addListener(map, 'bounds_changed', makeLink); google.maps.event.addListener(map, 'zoom_changed', makeLink); google.maps.event.addListener(map, 'click', function () { lastmarker = null; makeLink(); infowindow.close(); }); // Read the data from example.xml downloadUrl("example.xml", function (doc) { var xmlDoc = xmlParse(doc); var markers = xmlDoc.documentElement.getElementsByTagName("marker"); for (var i = 0; i < markers.length; i++) { // obtain the attribues of each marker var lat = parseFloat(markers[i].getAttribute("lat")); var lng = parseFloat(markers[i].getAttribute("lng")); var point = new google.maps.LatLng(lat, lng); var html = markers[i].getAttribute("html"); var label = markers[i].getAttribute("label"); var icon = markers[i].getAttribute("icon"); // create the marker var marker = createMarker(point, icon, label, html); } // put the assembled side_bar_html contents into the side_bar div document.getElementById("side_bar").innerHTML = side_bar_html; // ========= If a parameter was passed, open the info window ========== if (id) { if (idmarkers[id]) { google.maps.event.trigger(idmarkers[id], "click"); } else { alert("id " + id + " does not match any marker"); } } if (index > -1) { if (index < gmarkers.length) { google.maps.event.trigger(gmarkers[index], "click"); } else { alert("marker " + index + " does not exist"); } } }); } var infowindow = new google.maps.InfoWindow( { size: new google.maps.Size(150, 50) }); google.maps.event.addDomListener(window, "load", initialize); And here is an example of my XML formatting <marker lat="42.196175" lng="-121.699224" html="This is the information about 104" iconimage="/about/map/images/104.png" label="104" />

  Read the article

• Ideas for multiplatform encrypted java mobile storage system

  - by Fernando Miguélez

  Objective I am currently designing the API for a multiplatform storage system that would offer same interface and capabilities accross following supported mobile Java Platforms: J2ME. Minimum configuration/profile CLDC 1.1/MIDP 2.0 with support for some necessary JSRs (JSR-75 for file storage). Android. No minimum platform version decided yet, but rather likely could be API level 7. Blackberry. It would use the same base source of J2ME but taking advantage of some advaced capabilities of the platform. No minimum configuration decided yet (maybe 4.6 because of 64 KB limitation for RMS on 4.5). Basically the API would sport three kind of stores: Files. These would allow standard directory/file manipulation (read/write through streams, create, mkdir, etc.). Preferences. It is a special store that handles properties accessed through keys (Similar to plain old java properties file but supporting some improvements such as different value data types such as SharedPreferences on Android platform) Local Message Queues. This store would offer basic message queue functionality. Considerations Inspired on JSR-75, all types of stores would be accessed in an uniform way by means of an URL following RFC 1738 conventions, but with custom defined prefixes (i.e. "file://" for files, "prefs://" for preferences or "queue://" for message queues). The address would refer to a virtual location that would be mapped to a physical storage object by each mobile platform implementation. Only files would allow hierarchical storage (folders) and access to external extorage memory cards (by means of a unit name, the same way as in JSR-75, but that would not change regardless of underlying platform). The other types would only support flat storage. The system should also support a secure version of all basic types. The user would indicate it by prefixing "s" to the URL (i.e. "sfile://" instead of "file://"). The API would only require one PIN (introduced only once) to access any kind of secure object types. Implementation issues For the implementation of both plaintext and encrypted stores, I would use the functionality available on the underlying platforms: Files. These are available on all platforms (J2ME only with JSR-75, but it is mandatory for our needs). The abstract File to actual File mapping is straight except for addressing issues. RMS. This type of store available on J2ME (and Blackberry) platforms is convenient for Preferences and maybe Message Queues (though depending on performance or size requirements these could be implemented by means of normal files). SharedPreferences. This type of storage, only available on Android, would match Preferences needs. SQLite databases. This could be used for message queues on Android (and maybe Blackberry). When it comes to encryption some requirements should be met: To ease the implementation it will be carried out on read/write operations basis on streams (for files), RMS Records, SharedPreferences key-value pairs, SQLite database columns. Every underlying storage object should use the same encryption key. Handling of encrypted stores should be the same as the unencrypted counterpart. The only difference (from the user point of view) accessing an encrypted store would be the addressing. The user PIN provides access to any secure storage object, but the change of it would not require to decrypt/re-encrypt all the encrypted data. Cryptographic capabilities of underlying platform should be used whenever it is possible, so we would use: J2ME: SATSA-CRYPTO if it is available (not mandatory) or lightweight BoncyCastle cryptographic framework for J2ME. Blackberry: RIM Cryptographic API or BouncyCastle Android: JCE with integraced cryptographic provider (BouncyCastle?) Doubts Having reached this point I was struck by some doubts about what solution would be more convenient, taking into account the limitation of the plataforms. These are some of my doubts: Encryption Algorithm for data. Would AES-128 be strong and fast enough? What alternatives for such scenario would you suggest? Encryption Mode. I have read about the weakness of ECB encryption versus CBC, but in this case the first would have the advantage of random access to blocks, which is interesting for seek functionality on files. What type of encryption mode would you choose instead? Is stream encryption suitable for this case? Key generation. There could be one key generated for each storage object (file, RMS RecordStore, etc.) or just use one for all the objects of the same type. The first seems "safer", though it would require some extra space on device. In your opinion what would the trade-offs of each? Key storage. For this case using a standard JKS (or PKCS#12) KeyStore file could be suited to store encryption keys, but I could also define a smaller structure (encryption-transformation / key data / checksum) that could be attached to each storage store (i.e. using addition files with the same name and special extension for plain files or embedded inside other types of objects such as RMS Record Stores). What approach would you prefer? And when it comes to using a standard KeyStore with multiple-key generation (given this is your preference), would it be better to use a record-store per storage object or just a global KeyStore keeping all keys (i.e. using the URL identifier of abstract storage object as alias)? Master key. The use of a master key seems obvious. This key should be protected by user PIN (introduced only once) and would allow access to the rest of encryption keys (they would be encrypted by means of this master key). Changing the PIN would only require to reencrypt this key and not all the encrypted data. Where would you keep it taking into account that if this got lost all data would be no further accesible? What further considerations should I take into account? Platform cryptography support. Do SATSA-CRYPTO-enabled J2ME phones really take advantage of some dedicated hardware acceleration (or other advantage I have not foreseen) and would this approach be prefered (whenever possible) over just BouncyCastle implementation? For the same reason is RIM Cryptographic API worth the license cost over BouncyCastle? Any comments, critics, further considerations or different approaches are welcome.

  Read the article

• HDFS some datanodes of cluster are suddenly disconnected while reducers are running

  - by user1429825

  I have 8 slave computers and 1 master computer for running Hadoop (ver 0.21) some datanodes of cluster are suddenly disconnected while I was running MapReduce code on 10GB data After all mappers finished and around 80% of reducers was processed, randomly one or more datanode disconned from network. and then the other datanodes start to disappear from network even if I killed the MapReduce job when I found some datanode was disconnected. I've tried to change dfs.datanode.max.xcievers to 4096, turned off fire-walls of all computing node, disabled selinux and increased the number of file open limit to 20000 but they didn't work at all... anyone have a idea to solve this problem? followings are error log from mapreduce 12/06/01 12:31:29 INFO mapreduce.Job: Task Id : attempt_201206011227_0001_r_000006_0, Status : FAILED java.io.IOException: Bad connect ack with firstBadLink as ***.***.***.148:20010 at org.apache.hadoop.hdfs.DFSOutputStream$DataStreamer.createBlockOutputStream(DFSOutputStream.java:889) at org.apache.hadoop.hdfs.DFSOutputStream$DataStreamer.nextBlockOutputStream(DFSOutputStream.java:820) at org.apache.hadoop.hdfs.DFSOutputStream$DataStreamer.run(DFSOutputStream.java:427) and followings are logs from datanode 2012-06-01 13:01:01,118 INFO org.apache.hadoop.hdfs.server.datanode.DataNode: Receiving block blk_-5549263231281364844_3453 src: /*.*.*.147:56205 dest: /*.*.*.142:20010 2012-06-01 13:01:01,136 INFO org.apache.hadoop.hdfs.server.datanode.DataNode: DatanodeRegistration(*.*.*.142:20010, storageID=DS-1534489105-*.*.*.142-20010-1337757934836, infoPort=20075, ipcPort=20020) Starting thread to transfer block blk_-3849519151985279385_5906 to *.*.*.147:20010 2012-06-01 13:01:19,135 WARN org.apache.hadoop.hdfs.server.datanode.DataNode: DatanodeRegistration(*.*.*.142:20010, storageID=DS-1534489105-*.*.*.142-20010-1337757934836, infoPort=20075, ipcPort=20020):Failed to transfer blk_-5797481564121417802_3453 to *.*.*.146:20010 got java.net.ConnectException: > Connection timed out at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method) at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:701) at org.apache.hadoop.net.SocketIOWithTimeout.connect(SocketIOWithTimeout.java:206) at org.apache.hadoop.net.NetUtils.connect(NetUtils.java:373) at org.apache.hadoop.hdfs.server.datanode.DataNode$DataTransfer.run(DataNode.java:1257) at java.lang.Thread.run(Thread.java:722) 2012-06-01 13:06:20,342 INFO org.apache.hadoop.hdfs.server.datanode.DataBlockScanner: Verification succeeded for blk_6674438989226364081_3453 2012-06-01 13:09:01,781 WARN org.apache.hadoop.hdfs.server.datanode.DataNode: DatanodeRegistration(*.*.*.142:20010, storageID=DS-1534489105-*.*.*.142-20010-1337757934836, infoPort=20075, ipcPort=20020):Failed to transfer blk_-3849519151985279385_5906 to *.*.*.147:20010 got java.net.SocketTimeoutException: 480000 millis timeout while waiting for channel to be ready for write. ch : java.nio.channels.SocketChannel[connected local=/*.*.*.142:60057 remote=/*.*.*.147:20010] at org.apache.hadoop.net.SocketIOWithTimeout.waitForIO(SocketIOWithTimeout.java:246) at org.apache.hadoop.net.SocketOutputStream.waitForWritable(SocketOutputStream.java:164) at org.apache.hadoop.net.SocketOutputStream.transferToFully(SocketOutputStream.java:203) at org.apache.hadoop.hdfs.server.datanode.BlockSender.sendChunks(BlockSender.java:388) at org.apache.hadoop.hdfs.server.datanode.BlockSender.sendBlock(BlockSender.java:476) at org.apache.hadoop.hdfs.server.datanode.DataNode$DataTransfer.run(DataNode.java:1284) at java.lang.Thread.run(Thread.java:722) hdfs-site.xml <configuration> <property> <name>dfs.name.dir</name> <value>/home/hadoop/data/name</value> </property> <property> <name>dfs.data.dir</name> <value>/home/hadoop/data/hdfs1,/home/hadoop/data/hdfs2,/home/hadoop/data/hdfs3,/home/hadoop/data/hdfs4,/home/hadoop/data/hdfs5</value> </property> <property> <name>dfs.replication</name> <value>3</value> </property> <property> <name>dfs.datanode.max.xcievers</name> <value>4096</value> </property> <property> <name>dfs.http.address</name> <value>0.0.0.0:20070</value> <description>50070 The address and the base port where the dfs namenode web ui will listen on. If the port is 0 then the server will start on a free port. </description> </property> <property> <name>dfs.datanode.http.address</name> <value>0.0.0.0:20075</value> <description>50075 The datanode http server address and port. If the port is 0 then the server will start on a free port. </description> </property> <property> <name>dfs.secondary.http.address</name> <value>0.0.0.0:20090</value> <description>50090 The secondary namenode http server address and port. If the port is 0 then the server will start on a free port. </description> </property> <property> <name>dfs.datanode.address</name> <value>0.0.0.0:20010</value> <description>50010 The address where the datanode server will listen to. If the port is 0 then the server will start on a free port. </description> <property> <name>dfs.datanode.ipc.address</name> <value>0.0.0.0:20020</value> <description>50020 The datanode ipc server address and port. If the port is 0 then the server will start on a free port. </description> </property> <property> <name>dfs.datanode.https.address</name> <value>0.0.0.0:20475</value> </property> <property> <name>dfs.https.address</name> <value>0.0.0.0:20470</value> </property> </configuration> mapred-site.xml <configuration> <property> <name>mapred.job.tracker</name> <value>masternode:29001</value> </property> <property> <name>mapred.system.dir</name> <value>/home/hadoop/data/mapreduce/system</value> </property> <property> <name>mapred.local.dir</name> <value>/home/hadoop/data/mapreduce/local</value> </property> <property> <name>mapred.map.tasks</name> <value>32</value> <description> default number of map tasks per job.</description> </property> <property> <name>mapred.tasktracker.map.tasks.maximum</name> <value>4</value> </property> <property> <name>mapred.reduce.tasks</name> <value>8</value> <description> default number of reduce tasks per job.</description> </property> <property> <name>mapred.map.child.java.opts</name> <value>-Xmx2048M</value> </property> <property> <name>io.sort.mb</name> <value>500</value> </property> <property> <name>mapred.task.timeout</name> <value>1800000</value> <!-- 30 minutes --> </property> <property> <name>mapred.job.tracker.http.address</name> <value>0.0.0.0:20030</value> <description> 50030 The job tracker http server address and port the server will listen on. If the port is 0 then the server will start on a free port. </description> </property> <property> <name>mapred.task.tracker.http.address</name> <value>0.0.0.0:20060</value> <description> 50060 </property> </configuration>

  Read the article

• Stretch UL to fill the entire DIV

  - by Interfaith

  There is a similar post: Stretch horizontal ul to fit width of div But mine is a little bit tricky, as I have tried the above example but failed. My code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-… <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <script type='text/javascript' src='https://ajax.googleapis.com/ajax/li… <script> function mainmenu(){ $(" #nav ul ").css({display: "none"}); // Opera Fix $(" #nav li").hover(function(){ $(this).find('ul:first').css({visibi… "visible",display: "none"}).show(400); },function(){ $(this).find('ul:first').css({visibi… "hidden"}); }); } $(document).ready(function(){ mainmenu(); }); </script> <style> body{ font-size:0.85em; font-family:Verdana, Arial, Helvetica, sans-serif; } #nav, #nav ul{ margin:0; padding:0; list-style-type:none; list-style-position:outside; position:relative; line-height:1.5em; display: table; width: 100%; } #nav a{ display:block; padding:10px 15px 10px 15px; border:1px solid #fff; color:#fff; text-align: center; margin:0; text-decoration:none; background: #C34328; border-top:1px solid #EF593B; -moz-box-shadow:0px 3px 4px #591E12 inset; -webkit-box-shadow:0px 3px 4px #591E12 inset; -box-shadow:0px 3px 4px #591E12 inset; } #nav a:hover{ background-color:#fff; color:#333; } #nav li{ float:left; position:relative; } #nav ul { position:absolute; display:none; width:12em; top:3.2em; } #nav li ul a{ width:12em; height:auto; float:left; } #nav ul ul{ top:auto; } #nav li ul ul { left:12em; margin:0px 0 0 10px; } </style> </head> <body> <div style="width: 980px; border: 1px black solid;"> <ul id="nav"> <li><a href="#">Find a Doctor</a></li> <li><a href="#">Why Interfaith</a></li> <li><a href="#">For Patients & Visitors</a> <ul> <li><a href="#">3.1 jQuery</a></li> <li><a href="#">3.2 Mootools</a></li> <li><a href="#">3.3 Prototype</a></li> </ul> </li> <li><a href="#">Medical Services</a> <ul> <li><a href="#">Behavioral Health</a></li> <li><a href="#">Clinical Laboratory</a></li> <li><a href="#">Dentistry</a></li> <li><a href="#">Emergency</a></li> <li><a href="#">Gynecology</a></li> <li><a href="#">Medicine</a></li> <li><a href="#">Pastoral</a></li> <li><a href="#">Pediatrics</a></li> <li><a href="#">Physical Medicine & Rehab</a></li> </ul> </li> <li><a href="#">Medical Trainings</a> <ul> <li><a href="#">Medical Training</a></li> <li><a href="#">Behavioral Health</a></li> <li><a href="#">Predoctoral Externship</a></li> <li><a href="#">Podiatric Residency</a></li> <li><a href="#">Dental Residency</a></li> <li><a href="#">Pulmonary Medicine</a></li> </ul> </li> <li><a href="#">Contact</a></li> </ul> </div> </body> </html> Can someone tell me where I have to edit to complete the code? Thanks

  Read the article

• What's New in ASP.NET 4

  - by Navaneeth

  The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" > <!-- Additional content --> </application> </site> </sites> <!-- Additional content --> <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server"   Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"   ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1"   style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1"   style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web>   <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

  Read the article

• The Incremental Architect&rsquo;s Napkin - #5 - Design functions for extensibility and readability

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/08/24/the-incremental-architectrsquos-napkin---5---design-functions-for.aspx The functionality of programs is entered via Entry Points. So what we´re talking about when designing software is a bunch of functions handling the requests represented by and flowing in through those Entry Points. Designing software thus consists of at least three phases: Analyzing the requirements to find the Entry Points and their signatures Designing the functionality to be executed when those Entry Points get triggered Implementing the functionality according to the design aka coding I presume, you´re familiar with phase 1 in some way. And I guess you´re proficient in implementing functionality in some programming language. But in my experience developers in general are not experienced in going through an explicit phase 2. “Designing functionality? What´s that supposed to mean?” you might already have thought. Here´s my definition: To design functionality (or functional design for short) means thinking about… well, functions. You find a solution for what´s supposed to happen when an Entry Point gets triggered in terms of functions. A conceptual solution that is, because those functions only exist in your head (or on paper) during this phase. But you may have guess that, because it´s “design” not “coding”. And here is, what functional design is not: It´s not about logic. Logic is expressions (e.g. +, -, && etc.) and control statements (e.g. if, switch, for, while etc.). Also I consider calling external APIs as logic. It´s equally basic. It´s what code needs to do in order to deliver some functionality or quality. Logic is what´s doing that needs to be done by software. Transformations are either done through expressions or API-calls. And then there is alternative control flow depending on the result of some expression. Basically it´s just jumps in Assembler, sometimes to go forward (if, switch), sometimes to go backward (for, while, do). But calling your own function is not logic. It´s not necessary to produce any outcome. Functionality is not enhanced by adding functions (subroutine calls) to your code. Nor is quality increased by adding functions. No performance gain, no higher scalability etc. through functions. Functions are not relevant to functionality. Strange, isn´t it. What they are important for is security of investment. By introducing functions into our code we can become more productive (re-use) and can increase evolvability (higher unterstandability, easier to keep code consistent). That´s no small feat, however. Evolvable code can hardly be overestimated. That´s why to me functional design is so important. It´s at the core of software development. To sum this up: Functional design is on a level of abstraction above (!) logical design or algorithmic design. Functional design is only done until you get to a point where each function is so simple you are very confident you can easily code it. Functional design an logical design (which mostly is coding, but can also be done using pseudo code or flow charts) are complementary. Software needs both. If you start coding right away you end up in a tangled mess very quickly. Then you need back out through refactoring. Functional design on the other hand is bloodless without actual code. It´s just a theory with no experiments to prove it. But how to do functional design? An example of functional design Let´s assume a program to de-duplicate strings. The user enters a number of strings separated by commas, e.g. a, b, a, c, d, b, e, c, a. And the program is supposed to clear this list of all doubles, e.g. a, b, c, d, e. There is only one Entry Point to this program: the user triggers the de-duplication by starting the program with the string list on the command line C:\>deduplicate "a, b, a, c, d, b, e, c, a" a, b, c, d, e …or by clicking on a GUI button. This leads to the Entry Point function to get called. It´s the program´s main function in case of the batch version or a button click event handler in the GUI version. That´s the physical Entry Point so to speak. It´s inevitable. What then happens is a three step process: Transform the input data from the user into a request. Call the request handler. Transform the output of the request handler into a tangible result for the user. Or to phrase it a bit more generally: Accept input. Transform input into output. Present output. This does not mean any of these steps requires a lot of effort. Maybe it´s just one line of code to accomplish it. Nevertheless it´s a distinct step in doing the processing behind an Entry Point. Call it an aspect or a responsibility - and you will realize it most likely deserves a function of its own to satisfy the Single Responsibility Principle (SRP). Interestingly the above list of steps is already functional design. There is no logic, but nevertheless the solution is described - albeit on a higher level of abstraction than you might have done yourself. But it´s still on a meta-level. The application to the domain at hand is easy, though: Accept string list from command line De-duplicate Present de-duplicated strings on standard output And this concrete list of processing steps can easily be transformed into code:static void Main(string[] args) { var input = Accept_string_list(args); var output = Deduplicate(input); Present_deduplicated_string_list(output); } Instead of a big problem there are three much smaller problems now. If you think each of those is trivial to implement, then go for it. You can stop the functional design at this point. But maybe, just maybe, you´re not so sure how to go about with the de-duplication for example. Then just implement what´s easy right now, e.g.private static string Accept_string_list(string[] args) { return args[0]; } private static void Present_deduplicated_string_list( string[] output) { var line = string.Join(", ", output); Console.WriteLine(line); } Accept_string_list() contains logic in the form of an API-call. Present_deduplicated_string_list() contains logic in the form of an expression and an API-call. And then repeat the functional design for the remaining processing step. What´s left is the domain logic: de-duplicating a list of strings. How should that be done? Without any logic at our disposal during functional design you´re left with just functions. So which functions could make up the de-duplication? Here´s a suggestion: De-duplicate Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Processing step 2 obviously was the core of the solution. That´s where real creativity was needed. That´s the core of the domain. But now after this refinement the implementation of each step is easy again:private static string[] Parse_string_list(string input) { return input.Split(',') .Select(s => s.Trim()) .ToArray(); } private static Dictionary<string,object> Compile_unique_strings(string[] strings) { return strings.Aggregate( new Dictionary<string, object>(), (agg, s) => { agg[s] = null; return agg; }); } private static string[] Serialize_unique_strings( Dictionary<string,object> dict) { return dict.Keys.ToArray(); } With these three additional functions Main() now looks like this:static void Main(string[] args) { var input = Accept_string_list(args); var strings = Parse_string_list(input); var dict = Compile_unique_strings(strings); var output = Serialize_unique_strings(dict); Present_deduplicated_string_list(output); } I think that´s very understandable code: just read it from top to bottom and you know how the solution to the problem works. It´s a mirror image of the initial design: Accept string list from command line Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Present de-duplicated strings on standard output You can even re-generate the design by just looking at the code. Code and functional design thus are always in sync - if you follow some simple rules. But about that later. And as a bonus: all the functions making up the process are small - which means easy to understand, too. So much for an initial concrete example. Now it´s time for some theory. Because there is method to this madness ;-) The above has only scratched the surface. Introducing Flow Design Functional design starts with a given function, the Entry Point. Its goal is to describe the behavior of the program when the Entry Point is triggered using a process, not an algorithm. An algorithm consists of logic, a process on the other hand consists just of steps or stages. Each processing step transforms input into output or a side effect. Also it might access resources, e.g. a printer, a database, or just memory. Processing steps thus can rely on state of some sort. This is different from Functional Programming, where functions are supposed to not be stateful and not cause side effects.[1] In its simplest form a process can be written as a bullet point list of steps, e.g. Get data from user Output result to user Transform data Parse data Map result for output Such a compilation of steps - possibly on different levels of abstraction - often is the first artifact of functional design. It can be generated by a team in an initial design brainstorming. Next comes ordering the steps. What should happen first, what next etc.? Get data from user Parse data Transform data Map result for output Output result to user That´s great for a start into functional design. It´s better than starting to code right away on a given function using TDD. Please get me right: TDD is a valuable practice. But it can be unnecessarily hard if the scope of a functionn is too large. But how do you know beforehand without investing some thinking? And how to do this thinking in a systematic fashion? My recommendation: For any given function you´re supposed to implement first do a functional design. Then, once you´re confident you know the processing steps - which are pretty small - refine and code them using TDD. You´ll see that´s much, much easier - and leads to cleaner code right away. For more information on this approach I call “Informed TDD” read my book of the same title. Thinking before coding is smart. And writing down the solution as a bunch of functions possibly is the simplest thing you can do, I´d say. It´s more according to the KISS (Keep It Simple, Stupid) principle than returning constants or other trivial stuff TDD development often is started with. So far so good. A simple ordered list of processing steps will do to start with functional design. As shown in the above example such steps can easily be translated into functions. Moving from design to coding thus is simple. However, such a list does not scale. Processing is not always that simple to be captured in a list. And then the list is just text. Again. Like code. That means the design is lacking visuality. Textual representations need more parsing by your brain than visual representations. Plus they are limited in their “dimensionality”: text just has one dimension, it´s sequential. Alternatives and parallelism are hard to encode in text. In addition the functional design using numbered lists lacks data. It´s not visible what´s the input, output, and state of the processing steps. That´s why functional design should be done using a lightweight visual notation. No tool is necessary to draw such designs. Use pen and paper; a flipchart, a whiteboard, or even a napkin is sufficient. Visualizing processes The building block of the functional design notation is a functional unit. I mostly draw it like this: Something is done, it´s clear what goes in, it´s clear what comes out, and it´s clear what the processing step requires in terms of state or hardware. Whenever input flows into a functional unit it gets processed and output is produced and/or a side effect occurs. Flowing data is the driver of something happening. That´s why I call this approach to functional design Flow Design. It´s about data flow instead of control flow. Control flow like in algorithms is of no concern to functional design. Thinking about control flow simply is too low level. Once you start with control flow you easily get bogged down by tons of details. That´s what you want to avoid during design. Design is supposed to be quick, broad brush, abstract. It should give overview. But what about all the details? As Robert C. Martin rightly said: “Programming is abot detail”. Detail is a matter of code. Once you start coding the processing steps you designed you can worry about all the detail you want. Functional design does not eliminate all the nitty gritty. It just postpones tackling them. To me that´s also an example of the SRP. Function design has the responsibility to come up with a solution to a problem posed by a single function (Entry Point). And later coding has the responsibility to implement the solution down to the last detail (i.e. statement, API-call). TDD unfortunately mixes both responsibilities. It´s just coding - and thereby trying to find detailed implementations (green phase) plus getting the design right (refactoring). To me that´s one reason why TDD has failed to deliver on its promise for many developers. Using functional units as building blocks of functional design processes can be depicted very easily. Here´s the initial process for the example problem: For each processing step draw a functional unit and label it. Choose a verb or an “action phrase” as a label, not a noun. Functional design is about activities, not state or structure. Then make the output of an upstream step the input of a downstream step. Finally think about the data that should flow between the functional units. Write the data above the arrows connecting the functional units in the direction of the data flow. Enclose the data description in brackets. That way you can clearly see if all flows have already been specified. Empty brackets mean “no data is flowing”, but nevertheless a signal is sent. A name like “list” or “strings” in brackets describes the data content. Use lower case labels for that purpose. A name starting with an upper case letter like “String” or “Customer” on the other hand signifies a data type. If you like, you also can combine descriptions with data types by separating them with a colon, e.g. (list:string) or (strings:string[]). But these are just suggestions from my practice with Flow Design. You can do it differently, if you like. Just be sure to be consistent. Flows wired-up in this manner I call one-dimensional (1D). Each functional unit just has one input and/or one output. A functional unit without an output is possible. It´s like a black hole sucking up input without producing any output. Instead it produces side effects. A functional unit without an input, though, does make much sense. When should it start to work? What´s the trigger? That´s why in the above process even the first processing step has an input. If you like, view such 1D-flows as pipelines. Data is flowing through them from left to right. But as you can see, it´s not always the same data. It get´s transformed along its passage: (args) becomes a (list) which is turned into (strings). The Principle of Mutual Oblivion A very characteristic trait of flows put together from function units is: no functional units knows another one. They are all completely independent of each other. Functional units don´t know where their input is coming from (or even when it´s gonna arrive). They just specify a range of values they can process. And they promise a certain behavior upon input arriving. Also they don´t know where their output is going. They just produce it in their own time independent of other functional units. That means at least conceptually all functional units work in parallel. Functional units don´t know their “deployment context”. They now nothing about the overall flow they are place in. They are just consuming input from some upstream, and producing output for some downstream. That makes functional units very easy to test. At least as long as they don´t depend on state or resources. I call this the Principle of Mutual Oblivion (PoMO). Functional units are oblivious of others as well as an overall context/purpose. They are just parts of a whole focused on a single responsibility. How the whole is built, how a larger goal is achieved, is of no concern to the single functional units. By building software in such a manner, functional design interestingly follows nature. Nature´s building blocks for organisms also follow the PoMO. The cells forming your body do not know each other. Take a nerve cell “controlling” a muscle cell for example:[2] The nerve cell does not know anything about muscle cells, let alone the specific muscel cell it is “attached to”. Likewise the muscle cell does not know anything about nerve cells, let a lone a specific nerve cell “attached to” it. Saying “the nerve cell is controlling the muscle cell” thus only makes sense when viewing both from the outside. “Control” is a concept of the whole, not of its parts. Control is created by wiring-up parts in a certain way. Both cells are mutually oblivious. Both just follow a contract. One produces Acetylcholine (ACh) as output, the other consumes ACh as input. Where the ACh is going, where it´s coming from neither cell cares about. Million years of evolution have led to this kind of division of labor. And million years of evolution have produced organism designs (DNA) which lead to the production of these different cell types (and many others) and also to their co-location. The result: the overall behavior of an organism. How and why this happened in nature is a mystery. For our software, though, it´s clear: functional and quality requirements needs to be fulfilled. So we as developers have to become “intelligent designers” of “software cells” which we put together to form a “software organism” which responds in satisfying ways to triggers from it´s environment. My bet is: If nature gets complex organisms working by following the PoMO, who are we to not apply this recipe for success to our much simpler “machines”? So my rule is: Wherever there is functionality to be delivered, because there is a clear Entry Point into software, design the functionality like nature would do it. Build it from mutually oblivious functional units. That´s what Flow Design is about. In that way it´s even universal, I´d say. Its notation can also be applied to biology: Never mind labeling the functional units with nouns. That´s ok in Flow Design. You´ll do that occassionally for functional units on a higher level of abstraction or when their purpose is close to hardware. Getting a cockroach to roam your bedroom takes 1,000,000 nerve cells (neurons). Getting the de-duplication program to do its job just takes 5 “software cells” (functional units). Both, though, follow the same basic principle. Translating functional units into code Moving from functional design to code is no rocket science. In fact it´s straightforward. There are two simple rules: Translate an input port to a function. Translate an output port either to a return statement in that function or to a function pointer visible to that function. The simplest translation of a functional unit is a function. That´s what you saw in the above example. Functions are mutually oblivious. That why Functional Programming likes them so much. It makes them composable. Which is the reason, nature works according to the PoMO. Let´s be clear about one thing: There is no dependency injection in nature. For all of an organism´s complexity no DI container is used. Behavior is the result of smooth cooperation between mutually oblivious building blocks. Functions will often be the adequate translation for the functional units in your designs. But not always. Take for example the case, where a processing step should not always produce an output. Maybe the purpose is to filter input. Here the functional unit consumes words and produces words. But it does not pass along every word flowing in. Some words are swallowed. Think of a spell checker. It probably should not check acronyms for correctness. There are too many of them. Or words with no more than two letters. Such words are called “stop words”. In the above picture the optionality of the output is signified by the astrisk outside the brackets. It means: Any number of (word) data items can flow from the functional unit for each input data item. It might be none or one or even more. This I call a stream of data. Such behavior cannot be translated into a function where output is generated with return. Because a function always needs to return a value. So the output port is translated into a function pointer or continuation which gets passed to the subroutine when called:[3]void filter_stop_words( string word, Action<string> onNoStopWord) { if (...check if not a stop word...) onNoStopWord(word); } If you want to be nitpicky you might call such a function pointer parameter an injection. And technically you´re right. Conceptually, though, it´s not an injection. Because the subroutine is not functionally dependent on the continuation. Firstly continuations are procedures, i.e. subroutines without a return type. Remember: Flow Design is about unidirectional data flow. Secondly the name of the formal parameter is chosen in a way as to not assume anything about downstream processing steps. onNoStopWord describes a situation (or event) within the functional unit only. Translating output ports into function pointers helps keeping functional units mutually oblivious in cases where output is optional or produced asynchronically. Either pass the function pointer to the function upon call. Or make it global by putting it on the encompassing class. Then it´s called an event. In C# that´s even an explicit feature.class Filter { public void filter_stop_words( string word) { if (...check if not a stop word...) onNoStopWord(word); } public event Action<string> onNoStopWord; } When to use a continuation and when to use an event dependens on how a functional unit is used in flows and how it´s packed together with others into classes. You´ll see examples further down the Flow Design road. Another example of 1D functional design Let´s see Flow Design once more in action using the visual notation. How about the famous word wrap kata? Robert C. Martin has posted a much cited solution including an extensive reasoning behind his TDD approach. So maybe you want to compare it to Flow Design. The function signature given is:string WordWrap(string text, int maxLineLength) {...} That´s not an Entry Point since we don´t see an application with an environment and users. Nevertheless it´s a function which is supposed to provide a certain functionality. The text passed in has to be reformatted. The input is a single line of arbitrary length consisting of words separated by spaces. The output should consist of one or more lines of a maximum length specified. If a word is longer than a the maximum line length it can be split in multiple parts each fitting in a line. Flow Design Let´s start by brainstorming the process to accomplish the feat of reformatting the text. What´s needed? Words need to be assembled into lines Words need to be extracted from the input text The resulting lines need to be assembled into the output text Words too long to fit in a line need to be split Does sound about right? I guess so. And it shows a kind of priority. Long words are a special case. So maybe there is a hint for an incremental design here. First let´s tackle “average words” (words not longer than a line). Here´s the Flow Design for this increment: The the first three bullet points turned into functional units with explicit data added. As the signature requires a text is transformed into another text. See the input of the first functional unit and the output of the last functional unit. In between no text flows, but words and lines. That´s good to see because thereby the domain is clearly represented in the design. The requirements are talking about words and lines and here they are. But note the asterisk! It´s not outside the brackets but inside. That means it´s not a stream of words or lines, but lists or sequences. For each text a sequence of words is output. For each sequence of words a sequence of lines is produced. The asterisk is used to abstract from the concrete implementation. Like with streams. Whether the list of words gets implemented as an array or an IEnumerable is not important during design. It´s an implementation detail. Does any processing step require further refinement? I don´t think so. They all look pretty “atomic” to me. And if not… I can always backtrack and refine a process step using functional design later once I´ve gained more insight into a sub-problem. Implementation The implementation is straightforward as you can imagine. The processing steps can all be translated into functions. Each can be tested easily and separately. Each has a focused responsibility. And the process flow becomes just a sequence of function calls: Easy to understand. It clearly states how word wrapping works - on a high level of abstraction. And it´s easy to evolve as you´ll see. Flow Design - Increment 2 So far only texts consisting of “average words” are wrapped correctly. Words not fitting in a line will result in lines too long. Wrapping long words is a feature of the requested functionality. Whether it´s there or not makes a difference to the user. To quickly get feedback I decided to first implement a solution without this feature. But now it´s time to add it to deliver the full scope. Fortunately Flow Design automatically leads to code following the Open Closed Principle (OCP). It´s easy to extend it - instead of changing well tested code. How´s that possible? Flow Design allows for extension of functionality by inserting functional units into the flow. That way existing functional units need not be changed. The data flow arrow between functional units is a natural extension point. No need to resort to the Strategy Pattern. No need to think ahead where extions might need to be made in the future. I just “phase in” the remaining processing step: Since neither Extract words nor Reformat know of their environment neither needs to be touched due to the “detour”. The new processing step accepts the output of the existing upstream step and produces data compatible with the existing downstream step. Implementation - Increment 2 A trivial implementation checking the assumption if this works does not do anything to split long words. The input is just passed on: Note how clean WordWrap() stays. The solution is easy to understand. A developer looking at this code sometime in the future, when a new feature needs to be build in, quickly sees how long words are dealt with. Compare this to Robert C. Martin´s solution:[4] How does this solution handle long words? Long words are not even part of the domain language present in the code. At least I need considerable time to understand the approach. Admittedly the Flow Design solution with the full implementation of long word splitting is longer than Robert C. Martin´s. At least it seems. Because his solution does not cover all the “word wrap situations” the Flow Design solution handles. Some lines would need to be added to be on par, I guess. But even then… Is a difference in LOC that important as long as it´s in the same ball park? I value understandability and openness for extension higher than saving on the last line of code. Simplicity is not just less code, it´s also clarity in design. But don´t take my word for it. Try Flow Design on larger problems and compare for yourself. What´s the easier, more straightforward way to clean code? And keep in mind: You ain´t seen all yet ;-) There´s more to Flow Design than described in this chapter. In closing I hope I was able to give you a impression of functional design that makes you hungry for more. To me it´s an inevitable step in software development. Jumping from requirements to code does not scale. And it leads to dirty code all to quickly. Some thought should be invested first. Where there is a clear Entry Point visible, it´s functionality should be designed using data flows. Because with data flows abstraction is possible. For more background on why that´s necessary read my blog article here. For now let me point out to you - if you haven´t already noticed - that Flow Design is a general purpose declarative language. It´s “programming by intention” (Shalloway et al.). Just write down how you think the solution should work on a high level of abstraction. This breaks down a large problem in smaller problems. And by following the PoMO the solutions to those smaller problems are independent of each other. So they are easy to test. Or you could even think about getting them implemented in parallel by different team members. Flow Design not only increases evolvability, but also helps becoming more productive. All team members can participate in functional design. This goes beyon collective code ownership. We´re talking collective design/architecture ownership. Because with Flow Design there is a common visual language to talk about functional design - which is the foundation for all other design activities.   PS: If you like what you read, consider getting my ebook “The Incremental Architekt´s Napkin”. It´s where I compile all the articles in this series for easier reading. I like the strictness of Function Programming - but I also find it quite hard to live by. And it certainly is not what millions of programmers are used to. Also to me it seems, the real world is full of state and side effects. So why give them such a bad image? That´s why functional design takes a more pragmatic approach. State and side effects are ok for processing steps - but be sure to follow the SRP. Don´t put too much of it into a single processing step. ? Image taken from www.physioweb.org ? My code samples are written in C#. C# sports typed function pointers called delegates. Action is such a function pointer type matching functions with signature void someName(T t). Other languages provide similar ways to work with functions as first class citizens - even Java now in version 8. I trust you find a way to map this detail of my translation to your favorite programming language. I know it works for Java, C++, Ruby, JavaScript, Python, Go. And if you´re using a Functional Programming language it´s of course a no brainer. ? Taken from his blog post “The Craftsman 62, The Dark Path”. ?

  Read the article

• Windows CE Chat Transcript (March 30, 2010)

  - by Bruce Eitman

  For those of you who missed the chat today, here is the raw transcript.   By raw, I mean that I copied and pasted the discussion without any edits. This is divided into two parts, the top part is the answers from the Microsoft Experts and the bottom part is the questions from the audience. Answers from Microsoft:   Karel Danihelka [MS] (Expert)[2010-3-30 12:2]: Hi everyone, my name is Karel Danihelka and I am developer in partner response team. Sing Wee [MS] (Expert)[2010-3-30 12:2]: Hi, I'm Sing Wee, part of the CoreOS/BSP Test Team. GLanger_MS (Expert)[2010-3-30 12:2]: Hi, I'm Glen Langer, program manager on the Core Team. Karel Danihelka [MS] (Expert)[2010-3-30 12:3]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? A: Until you are using CPU with GHz frequency your only chance is use interrupt handler and implement all funcionality there. But it will be really tricky and may reduce system performance. If period will be near to millisecond timeframe you can use normal thread wait for event pattern. Karel Danihelka [MS] (Expert)[2010-3-30 12:5]: Q: I want to partition my NAND Flash device. One partition to use for hive ragistry and the other for the apps and data. The only way to do it is programmatically or setting some registry values ? A: It need to be set in registry - generally you need mark this partition as boot partition. Karel Danihelka [MS] (Expert)[2010-3-30 12:7]: Q: My CPU is Intel celeron M processor 1Ghz. A: In this case you can try use normal approach - in interrupt handler return SYSINTR and start thread in device driver which will spin thread waiting on event attached to this SYSINTR. Karel Danihelka [MS] (Expert)[2010-3-30 12:7]: Q: If i need to implement it using interrupt handlers, What are all the files that I should look at? A: Good quesiton - I would recommend documentation and there was BSP development book to download for free. mikehall_ms (Moderator)[2010-3-30 12:8]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? A: Using product support is the formal way to report bugs/issues - Product support can then create an issue that can be tracked. Karel Danihelka [MS] (Expert)[2010-3-30 12:9]: Q: But the operation for creating the partitions ? A: This is tricky - if you will make it autopartition & autoformat it will be created by filesystem. But generally it depends on your boot loader. mikehall_ms (Moderator)[2010-3-30 12:10]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: At MIX 2010 Charlie Kindel presented a session that described some of the core technologies that make up Windows Phone 7 Series, including the underlying operating system (Windows CE) and the new ISV programming model based on Silverlight and .NET - check out the Mix Online Videos to get more information. davbo-msft (Moderator)[2010-3-30 12:10]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: This forum is to discussed released products in the industry. Windows Mobile & Windows CE are based on the same Windows CE Kernel/system. Windows CE is focused on deliverying the OS for embedded customers in the market where Windows Mobile is focused on deliverying compelling Windows Phone platform. davbo-msft (Moderator)[2010-3-30 12:11]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: http://en.wikipedia.org/wiki/Windows_CE Wikipedia gives a good breakdown of the version history. Travis Hobrla [MS] (Expert)[2010-3-30 12:13]: Q: I created a OS design with KITL and kernel debugger enabled. But I am unable to connect to the target for debugging. I am getting the following error when i try to connect with the device. PB Debugger Cannot initialize the Kernel Debugger. PB Debugger Debugger could not initialize connection. PB Debugger The Kernel Debugger is waiting to connect with target. PB Debugger The Kernel Debugger has been disconnected successfully. A: One possibility is that a rogue cesvchost.exe has co-opted the debugger. I am assuming this is CE 6.0? Can you try exiting visual studio and manually killing the cesvchost.exe process from the Task Manager? davbo-msft (Moderator)[2010-3-30 12:14]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? A: For info on contacting Microsoft support refer to the support page on the Embedded website: http://msdn.microsoft.com/en-us/windowsembedded/dd897633.aspx Sing Wee [MS] (Expert)[2010-3-30 12:16]: Q: Do u mean ISR/IST implementation? How can i register an interrupt? What kind of interrupt should i register? A: A good introduction to interrupts in WinCE 6.0 can be found here (aside from the documentation on MSDN): http://download.microsoft.com/download/9/c/f/9cffaa58-4000-48d6-a4b2-5fed9e4e6410/Chapter%206%20-%20Developing%20Device%20Drivers.pdf mikehall_ms (Moderator)[2010-3-30 12:16]: Q: What will be different in Windows Compact 7 from CE 6.0? A: Unfortunately we cannot discuss unreleased products on this chat - keep an eye on the Windows Embedded web site and blogs to keep up to date with product announcements. Travis Hobrla [MS] (Expert)[2010-3-30 12:16]: Q: I am using CE 6.0. There is no cesvchost process running in my system. A: What operating system are you using? Karel Danihelka [MS] (Expert)[2010-3-30 12:16]: Q: So...I have to modify file system code to create 2 partition at system startup ?!! I haven't understood.... A: You don't need to modify code, there are registry settings to achive this (look to documentation). But you may need to create partition table in boot loader. Unfortunatelly there isn't simple way how to do it. davbo-msft (Moderator)[2010-3-30 12:18]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Windows Embedded CE 6.0 R3 includes Sliverlight for Windows Embedded. Refer to New Features overview on the embedded web site. http://www.microsoft.com/windowsembedded/en-us/products/windowsce/default.mspx. Silverlight - The power of Silverlight brought to Windows Embedded CE to create rich applications and user interfaces is new part of Windows CE Embedded. mikehall_ms (Moderator)[2010-3-30 12:20]: Q: The link for developing device drivers is not working. can u please check that? A: http://msdn.microsoft.com/en-us/library/ms923714.aspx davbo-msft (Moderator)[2010-3-30 12:20]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Sorry misunderstood the question I thought you were asking if embedded CE could handle Silverlight. Please repost so that the question goes back into the active queue because once answered no way to put the status back to open. Travis Hobrla [MS] (Expert)[2010-3-30 12:21]: Q: sorry! Windows XP SP3 A: Can you try exiting VS2005 and confirming cesvchost.exe is not running, then renaming C:\Documents and Settings\USERNAME\Local Settings\Application Data\Microsoft\CoreCon\1.0 to 1.0_backup, then restarting VS2005? Sing Wee [MS] (Expert)[2010-3-30 12:24]: Q: Can I have the book's name please? A: I believe the downloadable version is related to the last link I sent. If you go to the following website, I believe you can download the whole thing: http://msdn.microsoft.com/en-us/windowsembedded/ce/cc294468.aspx davbo-msft (Moderator)[2010-3-30 12:24]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? A: change the URI of the image or use a writeable bitmap if they want to manually toggle the pixels Sing Wee [MS] (Expert)[2010-3-30 12:25]: A: Whoops, hit [ENTER] too early. On the right side, you'll see there an "Exam Preparation Kit" link that can be downloaded in several different languages. Sing Wee [MS] (Expert)[2010-3-30 12:25]: Q: Can I have the book's name please? A: Whoops, hit [ENTER] too early. On the right side, you'll see there an "Exam Preparation Kit" link that can be downloaded in several different languages. Karel Danihelka [MS] (Expert)[2010-3-30 12:26]: Q: I have a NAND Flash on my target device. On this flash I have the hive registry and an application.I have observed that when the NAND flash is fully, the system startup time is longer....is there a degradation of NAND use that influences the startup time ? Why ? A: Yes - on boot flash abstraction library (old one) read metadata from all sectors to rebuild physical - logical mapping table. davbo-msft (Moderator)[2010-3-30 12:27]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Need addition info on this question. Can you provide more details on what you are trying to do in Silverlight? davbo-msft (Moderator)[2010-3-30 12:27]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? A: Additonal Info: if you want to manually touch the pixels use WriteableBitmap if you want to use the underlying HWND then use IXRVisualHost::GetHWND() davbo-msft (Moderator)[2010-3-30 12:28]: Q: Writable bitmap, is there an example of the syntax? A: if you want to manually touch the pixels use WriteableBitmap if you want to use the underlying HWND then use IXRVisualHost::GetHWND() davbo-msft (Moderator)[2010-3-30 12:29]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Can I get more information about this question about what you are trying to accomplish in Silverlight? davbo-msft (Moderator)[2010-3-30 12:31]: Q: IXRVisualHost::GetHWND() exactly what I needed Thanks, A: Your welcome Sing Wee [MS] (Expert)[2010-3-30 12:31]: Q: ok. thanks for the book's link A: No problem. Travis Hobrla [MS] (Expert)[2010-3-30 12:32]: Q: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. A: There are a couple workarounds I can think of. I believe the Module element is only used when doing SYSGEN parsing to make sure dependent SYSGENs are present when the item is selected, so I believe it is optional to the catalog. The other obvious workaround is to shorten the soc name. I realize neither of these solutions is ideal. This is not something we anticipated when we tested CE6.0, sorry. Travis Hobrla [MS] (Expert)[2010-3-30 12:33]: Q: I am getting this error only when I select the KdStub as the debugger in Target device connectivity. A: Right, but KdStub is the debugger that you should use. Have you tried the steps I suggested? Travis Hobrla [MS] (Expert)[2010-3-30 12:36]: Q: If I select Active KTIL, My OS doesn't boots. It says "loading NK.EXE at 0x<xxxxx> location" after that nothing comes in the debug log. A: Can you look at the serial debug output and see what is happening there? Often it can give you a clue to the KITL driver malfunctioning. Travis Hobrla [MS] (Expert)[2010-3-30 12:38]: Q: I have tried that and I am getting the same error. A: I am assuming you have a device created in Target -> Connectivity Options in Platform Builder. What are the Kernel download / Kernel transport for your device? Travis Hobrla [MS] (Expert)[2010-3-30 12:40]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug A: This looks reasonable and does not give clues as to why boot would halt at that point. If you capture a network trace or turn on KITL debug zones via dpCurSettings in kitl.dll, do you see KITL active after this? Travis Hobrla [MS] (Expert)[2010-3-30 12:41]: Q: Both is happening via Ethernet. A: Only thing I have left to suggest is a Platform Builder installation Repair, then. Karel Danihelka [MS] (Expert)[2010-3-30 12:42]: Q: Hi, I saw that the ATADISK is quite generic and des not have any optimizations. Do you have any advice to consider while tryin to improve the performance of it? A: If I remember correctly sample code has support for some specific hardware controllers (little obsolete now). This should be good start point (if you will not decide take existing driver as sample and write you own). Travis Hobrla [MS] (Expert)[2010-3-30 12:44]: Q: I didn't do that. I have to try. A: I think that's the next valid step. You need to figure out whether KITL is hanging or the device - use instrumented serial debug messages and network trace to determine this. Sing Wee [MS] (Expert)[2010-3-30 12:46]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug A: Neo, have you by any chance tried looking into your firewall to see if it might be blocking traffic on any particular ports? Wireshark/netmon might be able to help you here if that's the issue. davbo-msft (Moderator)[2010-3-30 12:48]: Q: I lost spell check, how can i get it back A: Hello - can you give additional details about your question? Is this related to a Windows CE Embedded application? masatos_MSFT (Expert)[2010-3-30 12:51]: Q: When attempting to run the CETK cellcore tests the documentation states the pre-requisites include "stinger.ini", "ltk.ini" but windows CE doesn't provide these or document what they fully need to contain. Implicitly you also need "datatrans.xml" which isn't supplied. If you get around this error and steal these from Windows Mobile instead, when you try and run the CETK tests you get a data abort in radiometricsdll.dll. How should we invoke the cellcore parts of CETK? A: Hi Pev, what version of Windows CE and CETK are you using? I do not have the expertise to answer this question, but can find somebody who can. Travis Hobrla [MS] (Expert)[2010-3-30 12:52]: Q: I don't see a kitlcore.dll in my OS. is my debug image fails to load because of that? A: kitl.dll should be all that's needed, kitlcore.lib is linked into that. Travis Hobrla [MS] (Expert)[2010-3-30 12:55]: Q: I've got a platform (not developed by myself) where I2C bus support has to be provided through the OAL as the kernel needs to talk to devices such as the power management IC and gas gauge so a 'proper' I2C driver hanging off device manager isn't possible. This happens to be a polled driver, so obviously it hits the system hard when either under lots of traffic or an error condition occurs and the driver constantly polls. I originally thought that there was no straightforward way to make such code interrupt driven in the kernel (as it's a cludge) but I realised that that's exactly what ETHDBG drivers do. Is there any reason why I shouldn't have a go at implementing a similar mechanism for our kernel resident I2C driver? If not, are there any obvious pitfalls - I've not seen any other BSP's do this in the past... A: You can make a 'proper' driver that calls down into the OAL to do the actual I2C transactions. Alternatively you can build an interrupt-based version in the OAL where you handle everything in the ISR. There is nothing wrong with that so long as the rest of your drivers and app threads can handle longer times with interrupts off while you are servicing I2C interrupts. Sing Wee [MS] (Expert)[2010-3-30 12:55]: Q: I am having trouble with my mouse, I have the microsoft wireless mobile mouse 3000, when I push the scroll button I am suppose to have autoscroll instead it shows other web pages,Can you help me out tell me what to do!!! A: Sorry, this current chat is about Windows Embedded Compact. Hope you're able to find an answer to your question elsewhere. davbo-msft (Moderator)[2010-3-30 12:56]: Q: Is the Silverlight Animation "Spline" a BezierSpline? A: Spline - http://msdn.microsoft.com/en-us/library/ee501495.aspx<BR< a>>   masatos_MSFT (Expert)[2010-3-30 12:57]: Thanks for the info Pev. I will follow up with the CETK experts here and get back to you. davbo-msft (Moderator)[2010-3-30 12:59]: Q: Spline- bad link A: http://msdn.microsoft.com/en-us/library/ee501495.aspx davbo-msft (Moderator)[2010-3-30 13:0]: Q: Sorry, got to tirm the ">" A: No Worries http://msdn.microsoft.com/en-us/library/ee501495.aspx davbo-msft (Moderator)[2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; davbo-msft (Moderator)[2010-3-30 13:1]: Q: hi everybody. I would like to know if there is something know about a bug in RTC API (VOIP), especially when using SIP. According the to the analysis with application verifyier there is a heap link in rtcdllmedia.dll. All of the unreleased chunks seem to have a size of 6560 bytes. A: I will follow up with the Networking Team for a response. davbo-msft (Moderator)[2010-3-30 13:1]: Q: Hi, we've problems with debugging of applications (= breakpoints in Platform Builder will be ignored) over KITL on Windows CE 5.0, if the PDB files are large (over 60MB). Are there any limitations to size of the PDB files? A: I will follow up with the tools team for a response and post with the transcript. Sing Wee [MS] (Expert)[2010-3-30 13:1]: Q: I am unable to use the target control in my development environment. any ideas? A: Make sure you have SYSGEN_SHELL=1 set in your build environment. davbo-msft (Moderator)[2010-3-30 13:3]: Q: what are the main differences between Object Store and RAM disk ? They are both in RAM...are there performance differences ? access differences ? A: I will follow up with the Core Team and get a response posted with the transcript to MSDN  The Questions   [2010-3-30 12:57]: Thanks for the info Pev. I will follow up with the CETK experts here and get back to you. [2010-3-30 12:59]:   [2010-3-30 13:0]:   [2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; [2010-3-30 13:1]: [2010-3-30 13:1]: [2010-3-30 13:1]: [2010-3-30 13:3]: neo (Guest)[2010-3-30 11:37]: Hi all KellyG (Guest)[2010-3-30 11:37]: Hi KellyG (Guest)[2010-3-30 11:37]: I have a question unrelated to windows Ce embedded, can you please help me?? neo (Guest)[2010-3-30 11:38]: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals! c neo (Guest)[2010-3-30 11:38]: yes. post it. May be i cud give a try KellyG (Guest)[2010-3-30 11:38]: My Product key listed on my tower is not the product key I need for microsoft office, but that is the only product key listed. neo (Guest)[2010-3-30 11:39]: I hope this is a chat for windows embedded. please post ur queries in office forums KellyG (Guest)[2010-3-30 11:39]: it is but i could not find a forum for office neo (Guest)[2010-3-30 11:40]: I think moderators will help u out. @ davbo-msft: can u help this guy? neo (Guest)[2010-3-30 11:41]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? davbo-msft (Moderator)[2010-3-30 11:50]: Our chat today covers the topic of Windows Embedded CE! 1. This chat will last for one hour. During this hour, our Experts will respond to as many questions as they can. Please understand that there may be some questions we cannot respond to due to lack of information or because the information is not yet public. 2. We encourage you to submit questions for our Experts. To do so, type your questions in the send box, select the “ask the Experts” box and click SEND. Questions sent directly to the Guest Chat room will not be answered by the Experts, but we encourage other community members to assist. 3. We ask that you stay on topic for the duration of the chat. This helps the Guests and Experts follow the conversation more easily. We invite you to ask off topic questions after this chat is over, but not during. 4. Please abide by the Chat Code of Conduct. Chat code of conduct: <http://msdn.microsoft.com/chats/chatroom.aspx?ctl=hlp#Conduct>; Pev (Guest)[2010-3-30 11:54]: Evening! davbo-msft (Moderator)[2010-3-30 11:54]: Hello everyone this is Dave Boyce - I worked in the Multimedia area for Windows CE. neo (Guest)[2010-3-30 11:55]: hello dave neo (Guest)[2010-3-30 11:55]: The chat code of conduct link is not working! Pev (Guest)[2010-3-30 11:56]: Best be polite just in case then ;-) neo (Guest)[2010-3-30 11:56]: davbo-msft (Moderator)[2010-3-30 11:57]: I'll check out the issue w/ the link paolopat (Guest)[2010-3-30 12:0]: Hello davbo-msft (Moderator)[2010-3-30 12:0]: We are pleased to welcome our Experts for today’s chat. I will have them introduce themselves now. Chat will begin in a couple of minutes. <http://www.Microsoft.com/Embedded>; paolopat (Guest)[2010-3-30 12:3]: Hello Experts ! neo (Guest)[2010-3-30 12:3]: Welcome all! paolopat (Guest)[2010-3-30 12:3]: Q: I want to partition my NAND Flash device. One partition to use for hive ragistry and the other for the apps and data. The only way to do it is programmatically or setting some registry values ? neo (Guest)[2010-3-30 12:3]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? neo (Guest)[2010-3-30 12:5]: Q: My CPU is Intel celeron M processor 1Ghz. Pev (Guest)[2010-3-30 12:5]: neo: if your silicon has multiple general purpose timers, pick one that's not in use for the system timer / profiler and set it up to trigger irqs for your purpose. You can't guarantee hard realtime type responses though... GarySwalling (Guest)[2010-3-30 12:5]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? Pev (Guest)[2010-3-30 12:6]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? paolopat (Guest)[2010-3-30 12:6]: Q: But the operation for creating the partitions ? neo (Guest)[2010-3-30 12:6]: Q: If i need to implement it using interrupt handlers, What are all the files that I should look at? GPM (Guest)[2010-3-30 12:6]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? Jhony (Guest)[2010-3-30 12:7]: Q: I created a OS design with KITL and kernel debugger enabled. But I am unable to connect to the target for debugging. I am getting the following error when i try to connect with the device. PB Debugger Cannot initialize the Kernel Debugger. PB Debugger Debugger could not initialize connection. PB Debugger The Kernel Debugger is waiting to connect with target. PB Debugger The Kernel Debugger has been disconnected successfully. Charles (Guest)[2010-3-30 12:7]: What will be different in Windows Compact 7 from CE 6.0? neo (Guest)[2010-3-30 12:8]: Can I have the book's name please? kiefs_dev (Guest)[2010-3-30 12:8]: Q: hi everybody. I would like to know if there is something know about a bug in RTC API (VOIP), especially when using SIP. According the to the analysis with application verifyier there is a heap link in rtcdllmedia.dll. All of the unreleased chunks seem to have a size of 6560 bytes. paolopat (Guest)[2010-3-30 12:10]: Q: So...I have to modify file system code to create 2 partition at system startup ?!! I haven't understood.... neo (Guest)[2010-3-30 12:10]: Q: Do u mean ISR/IST implementation? How can i register an interrupt? What kind of interrupt should i register? neo (Guest)[2010-3-30 12:11]: Q: Can I have the book's name please? Charles (Guest)[2010-3-30 12:11]: Q: What will be different in Windows Compact 7 from CE 6.0? PaulT (Guest)[2010-3-30 12:11]: neo: I'd say that you really need the docs for YOUR BSP, not generic documents for BSPs in general. Each BSP may be architected differently. If you're using the CEPC BSP, then the documentation that comes with Platform Builder is a reasonable place to look. GPM (Guest)[2010-3-30 12:11]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? Elektrobit (Guest)[2010-3-30 12:12]: Q: Hi, we've problems with debugging of applications (= breakpoints in Platform Builder will be ignored) over KITL on Windows CE 5.0, if the PDB files are large (over 60MB). Are there any limitations to size of the PDB files? Jhony (Guest)[2010-3-30 12:15]: Q: I am using CE 6.0. There is no cesvchost process running in my system. alexquisi (Guest)[2010-3-30 12:15]: Q: Hi, I saw that the ATADISK is quite generic and des not have any optimizations. Do you have any advice to consider while tryin to improve the performance of it? Jhony (Guest)[2010-3-30 12:17]: Windows XP service pack 1 Jhony (Guest)[2010-3-30 12:17]: Q: sorry! Windows XP SP3 neo (Guest)[2010-3-30 12:19]: Q: The link for developing device drivers is not working. can u please check that? paolopat (Guest)[2010-3-30 12:20]: Q: I have a NAND Flash on my target device. On this flash I have the hive registry and an application.I have observed that when the NAND flash is fully, the system startup time is longer....is there a degradation of NAND use that influences the startup time ? Why ? Pev (Guest)[2010-3-30 12:20]: Q: When attempting to run the CETK cellcore tests the documentation states the pre-requisites include "stinger.ini", "ltk.ini" but windows CE doesn't provide these or document what they fully need to contain. Implicitly you also need "datatrans.xml" which isn't supplied. If you get around this error and steal these from Windows Mobile instead, when you try and run the CETK tests you get a data abort in radiometricsdll.dll. How should we invoke the cellcore parts of CETK? Pev (Guest)[2010-3-30 12:21]: Hi all, Pev (Guest)[2010-3-30 12:21]: oops Pev (Guest)[2010-3-30 12:21]: :-D Pev (Guest)[2010-3-30 12:24]: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Pev (Guest)[2010-3-30 12:25]: Q: Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. GPM (Guest)[2010-3-30 12:25]: Q: Writable bitmap, is there an example of the syntax? Pev (Guest)[2010-3-30 12:25]: Q: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. Pev (Guest)[2010-3-30 12:25]: sorry, messed up submission there! GPM (Guest)[2010-3-30 12:26]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? GPM (Guest)[2010-3-30 12:28]: Q: IXRVisualHost::GetHWND() exactly what I needed Thanks, PaulT (Guest)[2010-3-30 12:29]: GPM: You don't have to keep submitting the questions. The chat experts have an application that they're using to follow the chat and all Ask the Experts questions are logged. Jhony (Guest)[2010-3-30 12:29]: Q: I am getting this error only when I select the KdStub as the debugger in Target device connectivity. neo (Guest)[2010-3-30 12:30]: Q: ok. thanks for the book's link Pev (Guest)[2010-3-30 12:31]: Hm, did those two I submitted get picked up by anyone? neo (Guest)[2010-3-30 12:33]: Q: If I select Active KTIL, My OS doesn't boots. It says "loading NK.EXE at 0x<xxxxx> location" after that nothing comes in the debug log. PaulT (Guest)[2010-3-30 12:34]: Pev: PaulT (Guest)[2010-3-30 12:35]: Pev: I'm sure they did. The guys who are actually on the chat may not be experts in that part of things. That's usually the explanation when you don't get an answer in 10 minutes or so. Pev (Guest)[2010-3-30 12:36]: Ah, fair enough Susie (Guest)[2010-3-30 12:36]: My Outlook Express incoming mail is corrput. No ONE has been able to fix the problem, Dell or Norton. I have dial up I'm in a rural area Jhony (Guest)[2010-3-30 12:37]: Q: I have tried that and I am getting the same error. Pev (Guest)[2010-3-30 12:37]: Susie : Use Thunderbird instead :-D PaulT (Guest)[2010-3-30 12:37]: Susie: Sorry, but this chat is not about Windows, but Embedded (like what runs on a phone). Your best chance is to find a local expert or talk to your ISP. paolopat (Guest)[2010-3-30 12:37]: Q: what are the main differences between Object Store and RAM disk ? They are both in RAM...are there performance differences ? access differences ? Susie (Guest)[2010-3-30 12:38]: My computer knowlege is very limited, what is Thunderbird? Pev (Guest)[2010-3-30 12:38]: A different email client :-D neo (Guest)[2010-3-30 12:39]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug Susie (Guest)[2010-3-30 12:39]: Do I need to uninstall Outlook Express youngboyzie (Guest)[2010-3-30 12:39]: I need to start battery calibration for my new battery for my dell inspiron 1525 laptop and should be able to reach the BIOS screen by hitting f2 but this isnt working... help? Pev (Guest)[2010-3-30 12:39]: Nah, you can run it instead - you'll still need help from your ISP to configure it I expect Jhony (Guest)[2010-3-30 12:39]: Q: Both is happening via Ethernet. PaulT (Guest)[2010-3-30 12:40]: youngboyzie: You're off-topic. This is not a general chat for Windows and certainly not for Dell. You'll have to ask Dell how to get to setup; it's their machine. bill (Guest)[2010-3-30 12:41]: I lost spell check, how can i get et back neo (Guest)[2010-3-30 12:42]: Q: I didn't do that. I have to try. Jhony (Guest)[2010-3-30 12:43]: Q: Ok. I will do it then. bill (Guest)[2010-3-30 12:43]: Q: I lost spell check, how can i get it back PaulT (Guest)[2010-3-30 12:44]: bill: This isn't a general Windows chat. There are some Web forums that you might try. GarySwalling (Guest)[2010-3-30 12:45]: Q: Thanks, I found the Phone 7 presentation at http://live.visitmix.com/MIX10/Sessions/CL13 GPM (Guest)[2010-3-30 12:45]: Q: Is the Silverlight Animation "Spline" a BezierSpline? neo (Guest)[2010-3-30 12:46]: Q: ok. I'll do it. thanks Pev (Guest)[2010-3-30 12:46]: Whowever was asking about KITL connection : I've had this loads in the past. I think I started debugging last time by using wireshark to see what was happening on the network then setting up the OAL_ETHER and OAL_FUNC and OAL_VERBOSE as well as OAL_KITL flags to see what was actually happening in the driver.... Pev (Guest)[2010-3-30 12:47]: I'd generally make sure that you're testing though a 10baseT hub (instead of anything faster) and forcing Active KITL in polled mode too... neo (Guest)[2010-3-30 12:48]: Q: I disabled the firewall in my PC. Pev (Guest)[2010-3-30 12:50]: Q: I've got a platform (not developed by myself) where I2C bus support has to be provided through the OAL as the kernel needs to talk to devices such as the power management IC and gas gauge so a 'proper' I2C driver hanging off device manager isn't possible. This happens to be a polled driver, so obviously it hits the system hard when either under lots of traffic or an error condition occurs and the driver constantly polls. I originally thought that there was no straightforward way to make such code interrupt driven in the kernel (as it's a cludge) but I realised that that's exactly what ETHDBG drivers do. Is there any reason why I shouldn't have a go at implementing a similar mechanism for our kernel resident I2C driver? If not, are there any obvious pitfalls - I've not seen any other BSP's do this in the past... neo (Guest)[2010-3-30 12:51]: Q: I don't see a kitlcore.dll in my OS. is my debug image fails to load because of that? Pev (Guest)[2010-3-30 12:52]: Q: Hi masatos, I'm using Windows Embedded CE 6.0 with R3 and patched to feb 2010's QFE's (with it's associated CETK version) this is a machine with only CE 6.0 on (no conflicts with earlier CE or WM...) neo (Guest)[2010-3-30 12:54]: ok. Got it neo (Guest)[2010-3-30 12:54]: Q: ok. Got it Roundman (Guest)[2010-3-30 12:55]: Q: I am having trouble with my mouse, I have the microsoft wireless mobile mouse 3000, when I push the scroll button I am suppose to have autoscroll instead it shows other web pages,Can you help me out tell me what to do!!! Pev (Guest)[2010-3-30 12:55]: Hey neo, debugging kitl issues is really frustrating but dont lose heart :-) neo (Guest)[2010-3-30 12:55]: @ pev : u fixed the problem of KITL after that? neo (Guest)[2010-3-30 12:56]: I am getting the same error again and again. I even cleaned my environment and tried in a fresh PC. But didn't succeed yet Pev (Guest)[2010-3-30 12:56]: Well, eventually - my experiences probably won't help you as different platforms have different reasons for doing that neo (Guest)[2010-3-30 12:56]: I think so PaulT (Guest)[2010-3-30 12:58]: neo: Have you searched the old messages in microsoft.public.windowsce.platbuilder? It seems to me that there was a packet size situation where it was possible to have problems with KITL connections based on a setting on the PC. Google Groups, groups.google.com, Advanced Groups Search will allow you to search a single newsgroup or a set of newsgroups easily. GPM (Guest)[2010-3-30 12:58]: Q: Spline- bad link PaulT (Guest)[2010-3-30 12:58]: GPM: without the > at the end does it work? It seems to for me... neo (Guest)[2010-3-30 12:58]: But some times if i try to connect to the device again. The Image information is seen in the serial debug. what does that mean?Download BIN file information: ----------------------------------------------------- [0]: Base Address=0x220000 Length=0x18DAADC Received a broadcast message !CheckUDP: Not UDP (proto = 0x00000001) after this i am getting the old errors. PB debugger cannot initialize ... GPM (Guest)[2010-3-30 12:59]: Q: Sorry, got to tirm the ">" neo (Guest)[2010-3-30 12:59]: ok paul. I ll look into that. davbo-msft (Moderator)[2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; neo (Guest)[2010-3-30 13:1]: Q: I am unable to use the target control in my development environment. any ideas? Pev (Guest)[2010-3-30 13:1]: Sure, if KITL isn't connected target control won't work as it runs over kitl... neo (Guest)[2010-3-30 13:1]: ok .thanks pev neo (Guest)[2010-3-30 13:2]: yes. sysgen_shell is set to 1 neo (Guest)[2010-3-30 13:2]: Q: yes. sysgen_shell is set to 1 Marcelovk (Guest)[2010-3-30 13:2]: Q: Is there any way to extract the default command lines of the tests in CETK? I want to have it running unconnected from the desktop.   Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• Debian squeeze keyboard and touchpad not working / detected on laptop

  - by Esa

  They work before gdm3 starts. a connected mouse also stops working, but functions after removal and re-plug. no xorg.conf. log doesn't show any loading of drivers for kbd/touchpad [ 33.783] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 33.783] X Protocol Version 11, Revision 0 [ 33.783] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 33.783] Current Operating System: Linux sus 3.2.0-0.bpo.2-amd64 #1 SMP Sun Mar 25 10:33:35 UTC 2012 x86_64 [ 33.783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=8686f840-d165-4d1e-b995-2ebbd94aa3d2 ro quiet [ 33.783] Build Date: 28 August 2011 09:39:43PM [ 33.783] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>) [ 33.783] Current version of pixman: 0.16.4 [ 33.783] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 33.783] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.783] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 09:34:04 2012 [ 33.837] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.936] (==) No Layout section. Using the first Screen section. [ 33.936] (==) No screen section available. Using defaults. [ 33.936] (**) |-->Screen "Default Screen Section" (0) [ 33.936] (**) | |-->Monitor "<default monitor>" [ 33.936] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.936] (==) Automatically adding devices [ 33.936] (==) Automatically enabling devices [ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.164] Entry deleted from font path. [ 34.226] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 34.226] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.226] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.226] (II) Loader magic: 0x7d3ae0 [ 34.226] (II) Module ABI versions: [ 34.226] X.Org ANSI C Emulation: 0.4 [ 34.226] X.Org Video Driver: 10.0 [ 34.226] X.Org XInput driver : 12.2 [ 34.226] X.Org Server Extension : 5.0 [ 34.227] (--) PCI:*(0:1:5:0) 1002:9712:103c:1661 rev 0, Mem @ 0xd0000000/268435456, 0xf1400000/65536, 0xf1300000/1048576, I/O @ 0x00008000/256 [ 34.227] (--) PCI: (0:2:0:0) 1002:6760:103c:1661 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 34.227] (II) Open ACPI successful (/var/run/acpid.socket) [ 34.227] (II) LoadModule: "extmod" [ 34.249] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 34.277] (II) Module extmod: vendor="X.Org Foundation" [ 34.277] compiled for 1.10.4, module version = 1.0.0 [ 34.277] Module class: X.Org Server Extension [ 34.277] ABI class: X.Org Server Extension, version 5.0 [ 34.277] (II) Loading extension SELinux [ 34.277] (II) Loading extension MIT-SCREEN-SAVER [ 34.277] (II) Loading extension XFree86-VidModeExtension [ 34.277] (II) Loading extension XFree86-DGA [ 34.277] (II) Loading extension DPMS [ 34.277] (II) Loading extension XVideo [ 34.277] (II) Loading extension XVideo-MotionCompensation [ 34.277] (II) Loading extension X-Resource [ 34.277] (II) LoadModule: "dbe" [ 34.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 34.299] (II) Module dbe: vendor="X.Org Foundation" [ 34.299] compiled for 1.10.4, module version = 1.0.0 [ 34.299] Module class: X.Org Server Extension [ 34.299] ABI class: X.Org Server Extension, version 5.0 [ 34.299] (II) Loading extension DOUBLE-BUFFER [ 34.299] (II) LoadModule: "glx" [ 34.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 34.477] (II) Module glx: vendor="X.Org Foundation" [ 34.477] compiled for 1.10.4, module version = 1.0.0 [ 34.477] ABI class: X.Org Server Extension, version 5.0 [ 34.477] (==) AIGLX enabled [ 34.477] (II) Loading extension GLX [ 34.477] (II) LoadModule: "record" [ 34.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 34.481] (II) Module record: vendor="X.Org Foundation" [ 34.481] compiled for 1.10.4, module version = 1.13.0 [ 34.481] Module class: X.Org Server Extension [ 34.481] ABI class: X.Org Server Extension, version 5.0 [ 34.481] (II) Loading extension RECORD [ 34.481] (II) LoadModule: "dri" [ 34.481] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 34.512] (II) Module dri: vendor="X.Org Foundation" [ 34.512] compiled for 1.10.4, module version = 1.0.0 [ 34.512] ABI class: X.Org Server Extension, version 5.0 [ 34.512] (II) Loading extension XFree86-DRI [ 34.512] (II) LoadModule: "dri2" [ 34.512] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 34.515] (II) Module dri2: vendor="X.Org Foundation" [ 34.515] compiled for 1.10.4, module version = 1.2.0 [ 34.515] ABI class: X.Org Server Extension, version 5.0 [ 34.515] (II) Loading extension DRI2 [ 34.515] (==) Matched ati as autoconfigured driver 0 [ 34.515] (==) Matched vesa as autoconfigured driver 1 [ 34.515] (==) Matched fbdev as autoconfigured driver 2 [ 34.515] (==) Assigned the driver to the xf86ConfigLayout [ 34.515] (II) LoadModule: "ati" [ 34.706] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 34.724] (II) Module ati: vendor="X.Org Foundation" [ 34.724] compiled for 1.10.3, module version = 6.14.2 [ 34.724] Module class: X.Org Video Driver [ 34.724] ABI class: X.Org Video Driver, version 10.0 [ 34.724] (II) LoadModule: "radeon" [ 34.725] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 34.923] (II) Module radeon: vendor="X.Org Foundation" [ 34.923] compiled for 1.10.3, module version = 6.14.2 [ 34.923] Module class: X.Org Video Driver [ 34.923] ABI class: X.Org Video Driver, version 10.0 [ 34.945] (II) LoadModule: "vesa" [ 34.945] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 34.988] (II) Module vesa: vendor="X.Org Foundation" [ 34.988] compiled for 1.10.3, module version = 2.3.0 [ 34.988] Module class: X.Org Video Driver [ 34.988] ABI class: X.Org Video Driver, version 10.0 [ 34.988] (II) LoadModule: "fbdev" [ 34.988] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 35.020] (II) Module fbdev: vendor="X.Org Foundation" [ 35.020] compiled for 1.10.3, module version = 0.4.2 [ 35.020] ABI class: X.Org Video Driver, version 10.0 [ 35.020] (II) RADEON: Driver for ATI Radeon chipsets: <snip> [ 35.023] (II) VESA: driver for VESA chipsets: vesa [ 35.023] (II) FBDEV: driver for framebuffer: fbdev [ 35.023] (++) using VT number 7 [ 35.033] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 35.033] (II) [KMS] Kernel modesetting enabled. [ 35.033] (WW) Falling back to old probe method for vesa [ 35.034] (WW) Falling back to old probe method for fbdev [ 35.034] (II) Loading sub module "fbdevhw" [ 35.034] (II) LoadModule: "fbdevhw" [ 35.034] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 35.185] (II) Module fbdevhw: vendor="X.Org Foundation" [ 35.185] compiled for 1.10.4, module version = 0.0.2 [ 35.185] ABI class: X.Org Video Driver, version 10.0 [ 35.288] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.288] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 35.288] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.288] (==) RADEON(0): Default visual is TrueColor [ 35.288] (==) RADEON(0): RGB weight 888 [ 35.288] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 35.288] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712) [ 35.288] (II) RADEON(0): PCI card detected [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: drmOpenMinor returns 9 [ 35.288] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 35.288] (II) Loading sub module "exa" [ 35.288] (II) LoadModule: "exa" [ 35.288] (II) Loading /usr/lib/xorg/modules/libexa.so [ 35.335] (II) Module exa: vendor="X.Org Foundation" [ 35.335] compiled for 1.10.4, module version = 2.5.0 [ 35.335] ABI class: X.Org Video Driver, version 10.0 [ 35.335] (II) RADEON(0): KMS Color Tiling: disabled [ 35.335] (II) RADEON(0): KMS Pageflipping: enabled [ 35.335] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 35.360] (II) RADEON(0): Output VGA-0 has no monitor section [ 35.360] (II) RADEON(0): Output LVDS has no monitor section [ 35.364] (II) RADEON(0): Output HDMI-0 has no monitor section [ 35.388] (II) RADEON(0): EDID for output VGA-0 [ 35.388] (II) RADEON(0): EDID for output LVDS [ 35.388] (II) RADEON(0): Manufacturer: LGD Model: 2ac Serial#: 0 [ 35.388] (II) RADEON(0): Year: 2010 Week: 0 [ 35.388] (II) RADEON(0): EDID Version: 1.3 [ 35.388] (II) RADEON(0): Digital Display Input [ 35.388] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 35.388] (II) RADEON(0): Gamma: 2.20 [ 35.388] (II) RADEON(0): No DPMS capabilities specified [ 35.388] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 35.388] (II) RADEON(0): First detailed timing is preferred mode [ 35.388] (II) RADEON(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 35.388] (II) RADEON(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 35.388] (II) RADEON(0): Manufacturer's mask: 0 [ 35.388] (II) RADEON(0): Supported detailed timing: [ 35.388] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 35.388] (II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 35.388] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 35.388] (II) RADEON(0): LG Display [ 35.388] (II) RADEON(0): LP156WH2-TLQB [ 35.388] (II) RADEON(0): EDID (in hex): [ 35.388] (II) RADEON(0): 00ffffffffffff0030e4ac0200000000 [ 35.388] (II) RADEON(0): 00140103802213780ac1259d5f5b9b27 [ 35.388] (II) RADEON(0): 19505400000001010101010101010101 [ 35.388] (II) RADEON(0): 010101010101121b567850000e302020 [ 35.388] (II) RADEON(0): 240058c2100000190000000000000000 [ 35.388] (II) RADEON(0): 00000000000000000000000000fe004c [ 35.388] (II) RADEON(0): 4720446973706c61790a2020000000fe [ 35.388] (II) RADEON(0): 004c503135365748322d544c514200c1 [ 35.388] (II) RADEON(0): Printing probed modes for output LVDS [ 35.388] (II) RADEON(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 35.388] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 35.388] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) [ 35.388] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 35.388] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 35.388] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz) [ 35.388] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz) [ 35.388] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 35.392] (II) RADEON(0): EDID for output HDMI-0 [ 35.392] (II) RADEON(0): Output VGA-0 disconnected [ 35.392] (II) RADEON(0): Output LVDS connected [ 35.392] (II) RADEON(0): Output HDMI-0 disconnected [ 35.392] (II) RADEON(0): Using exact sizes for initial modes [ 35.392] (II) RADEON(0): Output LVDS using initial mode 1366x768 [ 35.392] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.392] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000 [ 35.392] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM [ 35.392] (==) RADEON(0): DPI set to (96, 96) [ 35.392] (II) Loading sub module "fb" [ 35.392] (II) LoadModule: "fb" [ 35.392] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.492] (II) Module fb: vendor="X.Org Foundation" [ 35.492] compiled for 1.10.4, module version = 1.0.0 [ 35.492] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.492] (II) Loading sub module "ramdac" [ 35.492] (II) LoadModule: "ramdac" [ 35.492] (II) Module "ramdac" already built-in [ 35.492] (II) UnloadModule: "vesa" [ 35.492] (II) Unloading vesa [ 35.492] (II) UnloadModule: "fbdev" [ 35.492] (II) Unloading fbdev [ 35.492] (II) UnloadModule: "fbdevhw" [ 35.492] (II) Unloading fbdevhw [ 35.492] (--) Depth 24 pixmap format is 32 bpp [ 35.492] (II) RADEON(0): [DRI2] Setup complete [ 35.492] (II) RADEON(0): [DRI2] DRI driver: r600 [ 35.492] (II) RADEON(0): Front buffer size: 4224K [ 35.492] (II) RADEON(0): VRAM usage limit set to 228096K [ 35.615] (==) RADEON(0): Backing store disabled [ 35.615] (II) RADEON(0): Direct rendering enabled [ 35.658] (II) RADEON(0): Setting EXA maxPitchBytes [ 35.658] (II) EXA(0): Driver allocated offscreen pixmaps [ 35.658] (II) EXA(0): Driver registered support for the following operations: [ 35.658] (II) Solid [ 35.658] (II) Copy [ 35.658] (II) Composite (RENDER acceleration) [ 35.658] (II) UploadToScreen [ 35.658] (II) DownloadFromScreen [ 35.687] (II) RADEON(0): Acceleration enabled [ 35.687] (==) RADEON(0): DPMS enabled [ 35.687] (==) RADEON(0): Silken mouse enabled [ 35.721] (II) RADEON(0): Set up textured video [ 35.721] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.721] (--) RandR disabled [ 35.721] (II) Initializing built-in extension Generic Event Extension [ 35.721] (II) Initializing built-in extension SHAPE [ 35.721] (II) Initializing built-in extension MIT-SHM [ 35.721] (II) Initializing built-in extension XInputExtension [ 35.721] (II) Initializing built-in extension XTEST [ 35.721] (II) Initializing built-in extension BIG-REQUESTS [ 35.721] (II) Initializing built-in extension SYNC [ 35.721] (II) Initializing built-in extension XKEYBOARD [ 35.721] (II) Initializing built-in extension XC-MISC [ 35.721] (II) Initializing built-in extension SECURITY [ 35.721] (II) Initializing built-in extension XINERAMA [ 35.721] (II) Initializing built-in extension XFIXES [ 35.721] (II) Initializing built-in extension RENDER [ 35.721] (II) Initializing built-in extension RANDR [ 35.721] (II) Initializing built-in extension COMPOSITE [ 35.721] (II) Initializing built-in extension DAMAGE [ 35.721] (II) SELinux: Disabled on system [ 35.982] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.982] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.982] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.982] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.982] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.982] (II) AIGLX: Loaded and initialized /usr/lib/dri/r600_dri.so [ 35.982] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.999] (II) RADEON(0): Setting screen physical size to 361 x 203 [ 43.896] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.896] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.896] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.924] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.924] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.924] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.988] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.988] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.988] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 67.375] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 67.376] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.376] (II) LoadModule: "evdev" [ 67.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (II) Module evdev: vendor="X.Org Foundation" [ 67.392] compiled for 1.10.3, module version = 2.6.0 [ 67.392] Module class: X.Org XInput Driver [ 67.392] ABI class: X.Org XInput driver, version 12.2 [ 67.392] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 67.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (**) Logitech USB Optical Mouse: always reports core events [ 67.392] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 67.392] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 67.392] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 67.392] (--) Logitech USB Optical Mouse: Found relative axes [ 67.392] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 67.392] (II) Logitech USB Optical Mouse: Configuring as mouse [ 67.392] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 67.392] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 67.392] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 67.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input14/event1" [ 67.392] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 67.392] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 67.392] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.392] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.392] (II) No input driver/identifier specified (ignoring) [ 78.692] (II) Logitech USB Optical Mouse: Close [ 78.692] (II) UnloadModule: "evdev" [ 78.692] (II) Unloading evdev

  Read the article

• Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

  - by Ricardo Ferreira

  In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

  Read the article

< Previous Page | 207 208 209 210 211 212  | Next Page >