Search Results

Search found 7546 results on 302 pages for 'syntax highlight'.

Page 211/302 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • Android - overlay small check icon over specific image in gridview or change border

    - by oscar
    I've just asked a question about an hour ago, while waiting for replies, I've thought maybe I can achieve what I want differently. I was thinking of changing the image but it would be better if I could perhaps overlay something over the top of complete levels in the gridview i.e a small tick icon At the moment, when a level has been completed I am storing that with sharedpreferences So I have a gridView layout to display images that represent levels. Let's just say for this example I have 20 levels. When one level is complete is it possible to overlay the tick icon or somehow highlight the level image. Maybe change the border of the image?? Here are the image arrays I use int[] imageIDs = { R.drawable.one, R.drawable.two, R.drawable.three, R.drawable.four, R.drawable.five, R.drawable.six etc....... and then I have my code to set the images in gridView. Obviously there is more code in between. public View getView(int position, View convertView, ViewGroup parent) { ImageView imageView; if (convertView == null) { imageView = new ImageView(context); imageView.setLayoutParams(new GridView.LayoutParams(140, 140)); imageView.setScaleType(ImageView.ScaleType.CENTER_CROP); imageView.setPadding(5, 5, 5, 5); } else { imageView = (ImageView) convertView; } imageView.setImageResource(imageIDs[position]); return imageView; would it be possible to do any of the above, even the border method would be fine. Thanks for any help

    Read the article

  • Grouping a generic list via LINQ in VB.NET

    - by CD Smith
    I need to take a collection and group it via Linq but all the examples I've seen fail in some manner or other with some syntax difference that I can't quite lick. My collection: Dim a As New List(Of ProcessAlert) a.Add(New ProcessAlert("0000112367", "[email protected]", "Alert", 2)) a.Add(New ProcessAlert("0000112367", "[email protected]", "Document", 2)) a.Add(New ProcessAlert("0000112367", "[email protected]", "Note", 2)) a.Add(New ProcessAlert("0000112367", "[email protected]", "Alert", 1)) a.Add(New ProcessAlert("0000112367", "[email protected]", "Document", 1)) a.Add(New ProcessAlert("0000112367", "[email protected]", "Note", 1)) Return a I need to turn this collection into a simple way to give this final outcome: "[email protected]", "Alert, Document, Note" "[email protected]", "Alert, Document, Note" Here's the definition of the ProcessAlert class: Public Class ProcessAlert Public LoanNumber As String Public EmailAddress As String Public AlertType As String Public AlertMethodID As Byte End Class Thanks in advance, CD

    Read the article

  • How to turn this linq query to lazy loading

    - by Luke101
    I would like to make a certain select item to lazy load latter in my linq query. Here is my query var posts = from p in context.post where p.post_isdeleted == false && p.post_parentid == null select new { p.post_date, p.post_id, p.post_titleslug, p.post_votecount, FavoriteCount = context.PostVotes.Where(x => x.PostVote_postid == p.post_id).Count() //this should load latter }; I have deleted the FavoriteCount item in the select query and would like it to ba added later based on certain conditions. Here is the way I have it lazy loaded if (GetFavoriteInfo) { posts = posts.Select(x => new { FavoriteCount = context.PostVotes.Where(y => y.PostVote_postid == x.post_id).Count() }); } I am getting a syntax error with this the above query. How do I fix this

    Read the article

  • Help porting a bit of Prototype JavaScript to jQuery

    - by ewall
    I have already implemented some AJAX pagination in my Rails app by using the example code for the will_paginate plugin--which is apparently using Prototype. But if I wanted to switch to using jQuery for future additions, I really don't want to have the Prototype stuff sitting around too (yes, I know it's possible). I haven't written a lick of JavaScript in years, let alone looked into Prototype and jQuery... so I could use some help converting this bit into jQuery-compatible syntax: document.observe("dom:loaded", function() { // the element in which we will observe all clicks and capture // ones originating from pagination links var container = $(document.body) if (container) { var img = new Image img.src = '/images/spinner.gif' function createSpinner() { return new Element('img', { src: img.src, 'class': 'spinner' }) } container.observe('click', function(e) { var el = e.element() if (el.match('.pagination a')) { el.up('.pagination').insert(createSpinner()) new Ajax.Request(el.href, { method: 'get' }) e.stop() } }) } }) Thanks in advance!

    Read the article

  • How does dereferencing of a function pointer happen?

    - by eSKay
    Why and how does dereferencing a function pointer just "do nothing"? This is what I am talking about: #include<stdio.h> void hello() { printf("hello"); } int main(void) { (*****hello)(); } From a comment over here: function pointers dereference just fine, but the resulting function designator will be immediately converted back to a function pointer And from an answer here: Dereferencing (in way you think) a function's pointer means: accessing a CODE memory as it would be a DATA memory. Function pointer isn't suppose to be dereferenced in that way. Instead, it is called. I would use a name "dereference" side by side with "call". It's OK. Anyway: C is designed in such a way that both function name identifier as well as variable holding function's pointer mean the same: address to CODE memory. And it allows to jump to that memory by using call () syntax either on an identifier or variable. How exactly does dereferencing of a function pointer work?

    Read the article

  • Vendor neutral SQL

    - by Sparafusile
    I'm currently working on a project for a web application that may be installed on several different servers with various software configurations. I want to make my application as flexible as possible by allowing the user to have various SQL servers installed. The problem is the SQL syntax used by any two server vendors does not match up. For a simple example, here is the same SELECT statement for MS SQL and MySQL: MS SQL - SELECT TOP 1 * FROM MyTable ORDER BY DateCreated DESC MySQL - SELECT * FROM MyTable ORDER BY DateCreated DESC LIMIT 1 Are there any standard way to abstract the statement creation for various vendors? Any online resources or books discussing this problem? Any hints or smart-alec remarks that I'd find useful? Further information: I'm writing my we application in vanilla ASP running on a Windows server. Thanks, Spara

    Read the article

  • ExpressionEngine 2 module "tag cannot be processed"

    - by Phil Sturgeon
    So I have turned my hand to ExpressionEngine and while the backend crud was easy enough getting the frontend working with template syntax is proving difficult, even at the "hello world" level. expressionengine/third_party/rest/mod.rest.php class Rest { var $return_data = ''; function Rest() { $this->EE =& get_instance(); return $this->return_data = 'HAI'; } } // END REST Class /* End of file REST.php */ /* Location: ./application/libraries/REST.php */ Then im calling it directly in a new empty template: {exp:rest} So I'm expecting to see "HAI" but I get: Error The following tag cannot be processed: {exp:rest} Please check that the ‘rest’ module is installed and that ‘rest’ is an available method of the module Any ideas? The module is installed and the backend is running fine.

    Read the article

  • Implement a simple class in your favorite language.

    - by Oscar Reyes
    I'm doing this to learn syntax of different programming languages. So, how would you defined the following class along with with it's operations in your favorite programming language? Image generated by http://yuml.me/ And a main method or equivalent to invoke it: For instance, for Java it would be: ... public static void main( String [] args ) { Fraction f = new Fraction(); f.numerator( 2 ); f.denominator( 5 ); f.print(); } ....

    Read the article

  • How can I serialize the values of checked checkboxes in an iFrame into a hidden form field on clicki

    - by Frank Bailey
    I have an iFrame like so: <iframe width="100%" frameborder="0" height="470" allowtransparency="true" name="productframe" id="productframe" style="border-bottom:1px solid #eee"></iframe> The iframe contains several line items drawn from a sql server db, and I can check any of the checkboxes I want to perform a task with - in this case delete them. I have a button in the parent document that says "Delete selected", and I'd like to be able to click this button and populate a hidden field in my parent page with the values of the selected checkboxes in the child iframe. My checkboxes look like this: <input id="Checkbox1" type="checkbox" value="47" title="Select this row" name="selectItem"/> I have an instance of jquery on my parent page so I can make use of jquery selectors, I just have no clue as to the syntax needed to do this. Thanks in advance to anyone who can help me on this.

    Read the article

  • Chrome Extension Manifest 'Matches'

    - by Aristotle
    I'm trying my hands at a simple Chrome Extension, but am running into a problem with providing a value for the matches array in my content_scripts. { "name": "My Extension", "version": "1.0", "description": "My Extension Experiment", "browser_action": { "default_icon": "icon.png", "default_title": "Ext", "default_popup": "popup.html" }, "content_scripts": { "matches": ["http://*"], "js": ["scripts.js"] } } When I try to load this extension into Chrome, I get the following message: Could not load extension from 'C:\Users\foo\Desktop\Extensions\bar'.Invalid value for 'content_scripts'. I cannot see what is "invalid" about my value though. What I'm trying to do is match every URL, so my extension can manipulate the DOM (via javascript within scripts.js) of any page it is ran on. Am I missing something, going about this all wrong, or what? update After posting this question, I did notice that the Google example was slightly different than mine, so I modified my code a bit to reflect their syntax: "content_scripts": [{ "matches": ["http://*"], "js": ["scripts.js"] }] That being said, I still get the following error when trying to load my extension: Could not load extension from 'C:\Users\foo\Desktop\Extensions\bar'. Invalid value for 'content_scripts[0].matches[0]'.

    Read the article

  • "Compiling" content with short tags to var, without eval()

    - by Spot
    To start off, let me clear the air by saying we are aware of the dis/advantages to using short tag syntax in PHP. That is not what this question is about. Is there a way to "include" a file containing short tag code, into a variable, and have PHP actually parse the code? include/require obviously do not provide the data in a workable form, and output buffering does not parse the short tag code because it happens at runtime. Using eval() is simply not an option. Suggestions?

    Read the article

  • functions inside or outside jquery document ready

    - by Hans
    Up until now I just put all my jQuery goodness inside the $(document).ready() function, including simple functions used in certain user interactions. But functions that don´t require the DOM document to be loaded or are only called afterwards anyway, can be placed outside the $(document).ready() as well. Consider for example a very simple validation function such as: function hexvalidate(color) { // Validates 3-digit or 6-digit hex color codes var reg = /^(#)?([0-9a-fA-F]{3})([0-9a-fA-F]{3})?$/; return reg.test(color); } The function is only called from within the $(document).ready() function though. What is best practice (syntax, speed); placing such a function inside or outside the jquery document ready function?

    Read the article

  • Script to install and compile Python, Django, Virtualenv, Mercurial, Git, LessCSS, etc... on Dreamho

    - by tmslnz
    The Story After cleaning up my Dreamhost shared server's home folder from all the cruft accumulated over time, I decided to start afresh and compile/reinstall Python. All tutorials and snippets I found seemed overly simplistic, assuming (or ignoring) a bunch of dependencies needed by Python to compile all modules correctly. So, starting from http://andrew.io/weblog/2010/02/installing-python-2-6-virtualenv-and-virtualenvwrapper-on-dreamhost/ (so far the best guide I found), I decided to write a set-and-forget Bash script to automate this painful process, including along the way a bunch of other things I am planning to use. The Script I am hosting the script on http://bitbucket.org/tmslnz/python-dreamhost-batch/src/ The TODOs So far it runs fine, and does all it needs to do in about 900 seconds, giving me at the end of the process a fully functional Python / Mercurial / etc... setup without even needing to log out and back in. I though this might be of use for others too, but there are a few things that I think it's missing and I am not quite sure how to go for it, what's the best way to do it, or if this just doesn't make any sense at all. Check for errors and break Check for minor version bumps of the packages and give warnings Check for known dependencies Use arguments to install only some of the packages instead of commenting out lines Organise the code in a manner that's easy to update Optionally make the installers and compiling silent, with error logging to file failproof .bashrc modification to prevent breaking ssh logins and having to log back via FTP to fix it EDIT: The implied question is: can anyone, more bashful than me, offer general advice on the worthiness of the above points or highlight any problems they see with this approach? (see my answer to Ry4an's comment below) The Gist I am no UNIX or Bash or compiler expert, and this has been built iteratively, by trial and error. It is somehow going towards apt-get (well, 1% of it...), but since Dreamhost and others obviously cannot give root access on shared servers, this looks to me like a potentially very useful workaround; particularly so with some community work involved.

    Read the article

  • visualising piano performance evaluation

    - by Dolphin
    I need to develop a performance evaluator for piano playing. Based on a midi generated from sheet music, I need to evaluate the midi of the actual playing (midi keyboard). I'm planning to evaluate the playing based on note pitch, duration and loudness. The evaluation is I suppose a comparison of the notes of the sheet music and playing in midi. But I have no idea how I can visualise (i.e. show where the person have gone wrong) this evaluation process. i.e. maybe show both the notation and highlight which note has gone wrong. But how can I show any of this in some graphical form? Or more precisely on a stave (a music score) itself. I have note details (pitch, duration) and score details (key and time signature) stored in a table, and I'm using Java. But I have no clue as in how I can put all this into graphical form. Any insight is most gratefully appreciated. Advance thanks

    Read the article

  • I DISTINCTly hate MySQL (help building a query)

    - by Alex Mcp
    This is staight forward I believe: I have a table with 30,000 rows. When I SELECT DISTINCT 'location' FROM myTable it returns 21,000 rows, about what I'd expect, but it only returns that one column. What I want is to move those to a new table, but the whole row for each match. My best guess is something like SELECT * from (SELECT DISTINCT 'location' FROM myTable) or something like that, but it says I have a vague syntax error. Is there a good way to grab the rest of each DISTINCT row and move it to a new table all in one go?

    Read the article

  • Determine if on product page programmatically in Magento

    - by dfondente
    I want to insert tracking codes on all of the pages of a Magento site, and need to use a different syntax if the page is a CMS page, a category browsing page, or a product view page. I have a custom module set up with a block that inserts a generic tracking code on each page for now. From within the block, how can I distinguish between CMS pages, category pages, and product pages? I started with: Mage::app()->getRequest(); I can see that Mage::app()->getRequest()->getParam('id'); returns the product or category ID on product and category pages, but doesn't distinguish between those page types. Mage::app()->getRequest()->getRouteName(); return "cms" for CMS pages, but returns "catalog" for both category browsing and product view pages, so I can't use that to tell category and product pages apart. Is there some indicator in the request I can use safely? Or is there a better way to accomplish my goal of different tracking codes for different page types?

    Read the article

  • Is there a way to avoid IE7 quirks mode while rendering XML + CSS?

    - by Steven Huwig
    I've got some DocBook documentation styled with a CSS xml-stylesheet declaration. It looks great in Firefox, but IE7 doesn't seem to understand the CSS child selectors (e.g. section > title { ... }). I think this is because IE is running in quirks mode to render this XML, and older versions of IE didn't support that CSS syntax at all. The pages I found on the web all seem to focus on HTML and XHTML doctypes and how IE will behave given various permutations of these values. I couldn't find any information about straight XML + CSS. Worse yet, it seems that random XML documents always end up in quirks mode, no matter what format or stylesheet directives they have. Is XML rendering in IE doomed to be IE5.5 compatible? Will I really have to rewrite my CSS?

    Read the article

  • Excel VBA pass array of arrays to a function

    - by user429400
    I have one function that creates an array of arrays, and one function that should get the resulting array and write it to the spreadsheet. I don't find the syntax which will allow me to pass the array of arrays to the second function... Could you please help? Here is my code: The function that creates the array of arrays: Function GetCellDetails(dict1 As Dictionary, dict2 As Dictionary) As Variant Dim arr1, arr2 arr1 = dict1.Items arr2 = dict2.Items GetCellDetails = Array(arr1, arr2) End Function the function that writes it to the spreadsheet: Sub WriteCellDataToMemory(arr As Variant, day As Integer, cellId As Integer, nCells As Integer) row = CellIdToMemRow(cellId, nCells) col = DayToMemCol(day) arrSize = UBound(arr, 2) Range(Cells(row, col), Cells(row + arrSize , col + 2)) = Application.Transpose(arr) End Sub The code that calls the functions: Dim CellDetails CellDetails = GetCellDetails(dict1, dict2) WriteCellDataToMemory CellDetails, day, cellId, nCells Thanks, Li

    Read the article

  • Visual C++ 2010 solution-wide macros with parameters

    - by OregonGhost
    I'm trying to compile some source code with Visual C++ 2010 Express. The code was written for GCC, and contains attributes like this: struct something { ... } __attribute__((packed)); Since this is not standard C++ syntax, Visual C++ doesn't recognize it. With this macro prior to the struct declaration, it works fine: #define __attribute__(p) But I don't want to alter the files. I created a new property sheet (GccCompat), and went to Preprocessor Definitions, and added the macro, like this: __attribute__(p) or like this: __attribute__(p)= But it doesn't work. It's simply not called. If I define just __attribute__ (without parameters) in the same location, the macro is correctly defined. Note that the command line that is generated looks fine (the macros with parameters are passed exactly the same as the ones without), but the compiler seems to ignore it. So, how can I globally define my macro with a parameter?

    Read the article

  • linq to sql using foreign keys returning iqueryable(of myEntity]

    - by Gern Blandston
    I'm trying to use Linq to SQL to return an IQueryable(of Project) when using foreign key relationships. Using the below schema, I want to be able to pass in a UserId and get all the projects created for the company the user is associated with. DB tables: Projects Projid ProjCreator FK (UserId from UserInfo table) Companyid FK (CompanyID from Companies table) UserInfo UserID PK Companyid FK Companies CompanyId PK Description I can get the iqueryable(of project) when simply getting the ProjectCreator with this: Return (From p In db.Projects _ Where p.ProjectCreator = Me.UserId) But I'm having trouble getting the syntax to get a iqueryable(of projects) when using foreign keys. Below gives me an IQueryable(of anonymous) but I can't seem to convince it to give me an IQueryable(of project) even if I try to cast it: Dim retval = (From p In db.Projects _ Join c In db.Companies On p.CompanyId Equals c.CompanyId _ Join u In db.UserInfos On u.CompanyId Equals c.CompanyId _ Where u.Login = UserId)

    Read the article

  • Retreiving data from MySQL with html/javaScript on one domain and the PHP file on the other

    - by Mike
    I need to retrieve data from a MySQL database, and have it work one way for all types of servers. For example it should work on a server that runs no server side language, it should also work on LAMP, and IIS. I was thinking about using ajax and xmlhttprequest, but learned of the cross domain limitation. I also tried to just include the PHP in a tag, but it comes back with a syntax error in the HTML code created by the PHP file, even though it looks correct. Does anyone know how to fix either of these issues, or have a different way to go about it?

    Read the article

  • View a SYS.XMLTYPE returned from an Oracle function, using PL/SQL

    - by caerphilly
    I have an Oracle function that dynamically creates an XML document, and returns it in a SYS.XMLTYPE value. I want to run a query from SQL Developer that calls that function and prints the document (either via a select, or dbms_output - I don't care). But all the examples/documentation seem to refer to querying XML columns in tables, and I can't seem to get the syntax right for my particular usage. I'd like something like this: declare x SYS.XMLTYPE; begin x := my_package.my_function(); select x.getclobval() from x; -- doesn't work! end; How can I print out the value of the XML type variable 'x' in the above code?

    Read the article

  • Highlighting Manu Item : urlQuery

    - by phpExe
    I want to highlight menu item with url query. But in my function, all items will be "currentt". I think there is a logic bug in my function: function channel() { if (is_numeric($_GET['kanalID'])) { $kanalID = $_GET['kanalID']; } if ($_GET['kanalID'] == "") { $kanalID = 1;} $tv = array(1 => 'tv1', 3 => 'tv2', 7 => 'tv3', 8 => 'tv4', 25 => 'tv5', 26 => 'tv6', 39 => 'tv7', 41 => 'tv8'); $channel = '<ul class="channeList">'; foreach ($tv as $id => $kanal) { if($kanalID = $id){$class= "currentt";} $channel .= '<li> <a href="http://mysite.com/menu.php?kanalID='.$id.'" class="'.$class.'">'.$kanal.'</a> </li>'; } $channel .= '</ul>'; $channel .= '<div class="ply"><iframe src="http://mysite.com/index.php?id='.$kanalID.'&w=500&h=320" frameborder="0" width="500" height="320" ></iframe></div>'; return $channel; } echo channel(); How can I fix this? Thanks alot

    Read the article

  • Dang Error #1009 !

    - by boz
    I'm building a simple flash site for a friend who has a spa. I keep getting this error: Error #1009: Cannot access a property or method of a null object reference. at spa7_fla::MainTimeline/frame1() through the process of commenting out code, i've narrowed down to my link section: vox_link.addEventListener(MouseEvent.CLICK,gotoVox); function gotoVox(evtObj:Event):void { var voxSite:URLRequest=new URLRequest("http://www.voxmundiproject.com"); navigateToURL(voxSite, "_blank"); } With this section commented out, i don't get the 1009 error. When the code is active, I get the error. My code syntax is correct so I'm stumped. Does someone have an idea what my be wrong? Thanks!

    Read the article

  • Which text margin does SWT Table use when drawing text?

    - by Zordid
    I got a relatively easy question - but I cannot find anything anywhere to answer it. I use a simple SWT table widget in my application that displays only text in the cells. I got an incremental search feature and want to highlight text snippets in all cells if they match. So when typing "a", all "a"s should be highlighted. To get this, I add an SWT.EraseItem listener to interfere with the background drawing. If the current cell's text contains the search string, I find the positions and calculate relative x-coordinates within the text using event.gc.stringExtent - easy. With that I just draw rectangles "behind" the occurrences. Now, there's a flaw in this. The table does not draw the text without a margin, so my x coordinate does not really match - it is slightly off by a few pixels! But how many?? Where do I retrieve the cell's text margins that table's own drawing will use? No clue. Cannot find anything. :-( Bonus question: the table's draw method also shortens text and adds "..." if it does not fit into the cell. Hmm. My occurrence finder takes the TableItem's text and thus also tries to mark occurrences that are actually not visible because they are consumed by the "...". How do I get the shortened text and not the "real" text within the EraseItem draw handler? Thanks!

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >