umbraco scripts - Page 211

VIM "upgraded" to expandtab and tabstop=8 on Python files

- by dotancohen

After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

Read the article

Linux bonded Interfaces hanging periodically

- by David

I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

Read the article

turn off disable the performance cache

- by jessie

OK I run a streaming website and my CMS is giving me an error when uploading videos "Failed To Find Flength File" ok so I did some research. The answer I got from the coder was below. I did do all that, but the only thing I could not do is turn off what he refers to as performance cache, talked about in the last sentence... I am on a Cent OS Assuming the script is set up properly, you are probably dealing with some kind of write-caching. Some servers perform write-caching which prevents writing out the flength file or the entire CGITemp file during the upload. The flength file or the CGITemp file do not actually hit the disk until the upload is complete, making it worthless for reporting on progress during the upload. This may be fixed using a .htaccess file assuming your host supports them. Here is a link to an excellent tutorial on using .htaccess files. I strongly recommend giving it a quick read before attempting to install your own .htaccess file. 1. A mod_security module for Apache. To fix it just create a file called .htaccess (that's a period followed by "htaccess") and put the following lines in that file. Upload the file into the directory where the Uber-Uploader CGI ".pl" scripts resides, or in some directory above it (like your server's DOCUMENT_ROOT, i.e. the top-level of your webspace). htaccess files must be uploaded as ASCII mode, not BINARY. You may need to CHMOD the htaccess file to 644 or (RW-R--R--). # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off If the above method does not work, try putting the following lines into the file SetEnvIfNoCase Content-Type \ "^multipart/form-data;" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads" mod_gzip_on No 2. "Performance Cache" enabled on OS X SERVER. If you're running OS X Server and the progress bar isn't working, it could be because of "performance caching." Apparently if ANY of your hosted sites are using performance caching, then by default, all sites (domains) will attempt to. The fix then is to disable the performance cache on all hosted sites.

Read the article

Why would a process monitoring script use exit 1; on finding no problems?

- by user568458

General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

Read the article

How to configure apache's mod_proxy_html to work as an ajax proxy?

- by dcerecedo

I'm trying to build a web site that let's you view and manipulate data from any page in any other website. To do that, I have to bypass 'Allow Origin' problems: i'm loading the other domain's content in an iframe and i have to manipulate its content with javascript downloaded from my domain. My first attempt was to write a simple proxy myself, requesting the other domains page through a server proxy coded in Java that not only serves the content but rebuilds links (src's and href's) in the content so that the content referenced by these links alse get downloaded through my handmade proxy. The result is not bad but has problems with url's in css and scripts. It's then that i realized that mod_proxy_html is supposed to do exactly all this job. The problem is that i cannot figure out how to make it work as expected. Let's suppose my server runs in my-domain.com and to proxy and transform content from another domain i'd make a request like this: my-domain.com/proxy?url=http://another-domain.com/some/content I'd want mod_proxy_html to serve the content and rewrite following URLs in http://another-domain.com/some/content in the following ways: Absolute URLs not from another-domain.com: no rewritting Relative from root urls:/other/content - /proxy?url=http://another-domain.com/other/content Relative urls: other/content - /proxy?url=http://another-domain.com/some/content/other/content Relative to parent urls: ../other/content - /proxy?url=http://another-domain.com/some/other/content The url should be specified at runtime, not configuration time. Can this be achieved with mod_proxy_html? Could anyone provide a simple working configuration to start with? EDIT 1-First approach The following site config will work fine with sites that use absolute url's everywhere like http://www.huffingtonpost.es/. Youc could try on this config on localhost: http://localhost/asset/http://www.huffingtonpost.es/ <VirtualHost *:80> ServerName localhost LogLevel debug ProxyRequests off RewriteEngine On RewriteRule ^/asset/(.*) $1 [P] ProxyHTMLURLMap $1 /asset/ <Location /asset/> ProxyPassReverse / ProxyHTMLURLMap / /asset/ </Location> </VirtualHost> But as explained in the documentation, if I hit a site using relative url's, I'd like to have these rewritten on the html via mod_proxy_html. So I shoud change the Location block as follows: <Location /asset/> ProxyPassReverse / #Depending on your system use one line or the other #Ubuntu: #SetOutputFilter proxy-html #any other system: ProxyHTMLEnable On ProxyHTMLURLMap / /asset/ </Location> ...which doesn't seem to work. Comments, hints and ideas welcome!

Read the article

Pushing Large Files to 500+ Computers [closed]

- by WMIF

I work with a team to manage 500-600 rented Windows 7 computers for an annual conference. We have a large amount of data that needs to be synced to these computers, up to 1 TiB. The computers are divided into rooms and connected through unmanaged gigabit switches. We prepare these computers ahead of time with the Windows installation and configuration, plus any files that we have available to us before we send the base image in for replication by the rental company. Every year, we have presenters approach on site with up to gigs of data that need to be pushed to the room that they will be presenting in. Sometimes they only have a few files that are small sizes, such as a slide PDF, but can sometimes be much larger 5 GiB. Our current strategy for pushing these files is using batch scripts and RoboCopy. For the large pushes, we actually use a BitTorrent client to generate a torrent file, and then we use the batch-RoboCopy to push the torrent into a folder on the remote machines that is being monitored by an installed BT client. Often times, this data needs to be pushed immediately with a small time window. We have several machines in a control room that are identical to the machines on the floor that we use for these pushes. We occasionally have a need to execute a program on the remote machines, and we currently use batch and PSexec to handle this task. We would love to be able to respond to these last minute pushes with "sorry, your own fault", but it won't happen. The BT method has allowed us to have a much faster response time, but the whole batch process can get messy when there are multiple jobs being pushed. We use Enterprise Ghost for other processes, and it doesn't work well in this large of scale, plus it is really quite expensive for a once-a-year task like this. EDIT: There is a hard requirement that the remote machines on the floor are running Windows. The control machines do not have a hard OS requirement. I would really like to stay away from Multicast because of complications with upstream routers. Is Multicast or BitTorrent the better way to go on this? Is there another protocol that might work better?

Read the article

How should we serve files in a small bioinformatics cluster?

- by cespinoza

We have a small cluster of six ubuntu servers. We run bioinformatics analyses on these clusters. Each analysis takes about 24 hours to complete, each core i7 server can handle 2 at a time, takes as input about 5GB data and outputs about 10-25GB of data. We run dozens of these a week. The software is a hodgepodge of custom perl scripts and 3rd party sequence alignment software written in C/C++. Currently, files are served from two of the compute nodes (yes, we're using compute nodes as file servers)-- each node has 5 1TB sata drives mounted separately (no raid) and is pooled via glusterfs 2.0.1. They each have as 3 bonded intel ethernet pci gigabit ethernet cards, attached to a d-link DGS-1224T switch ($300 24 port consumer-level). We are not currently using jumbo frames (not sure why, actually). The two file-serving compute nodes are then mirrored via glusterfs. Each of the four other nodes mounts the files via glusterfs. The files are all large (4gb+), and are stored as bare files (no database/etc) if that matters. As you can imagine, this is a bit of a mess that grew organically without forethought and we want to improve it now that we're running out of space. Our analyses are I/O intensive and it is a bottle neck-- we're only getting 140mB/sec between the two fileservers, maybe 50mb/sec from the clients (which only have single NICs). We have a flexible budget which I can probably get up $5k or so. How should we spend our budget? We need at least 10TB of storage fast enough to serve all nodes. How fast/big does the cpu/memory of such a file server have to be? Should we use NFS, ATA over Ethernet, iSCSI, Glusterfs, or something else? Should we buy two or more servers and create some sort of storage cluster, or is 1 server enough for such a small number of nodes? Should we invest in faster NICs (say, PCI-express cards with multiple connectors)? The switch? Should we use raid, if so, hardware or software? and which raid (5, 6, 10, etc)? Any ideas appreciated. We're biologists, not IT gurus.

Read the article

cakephp & nginx config/rewrite rules

- by seanl

Hi somebody please help me out, I've asked this at stackoverflow as well but not got much of a response and was debating whether it was programming or server related. I’m trying to setup a cakephp environment on a Centos server running Nginx with Fact CGI. I already have a wordpress site running on the server and a phpmyadmin site so I have PHP configured correctly. My problem is that I cannot get the rewrite rules setup correct in my vhost so that cake renders pages correctly i.e. with styling and so on. I’ve googled as much as possible and the main consensus from the sites like the one listed below is that I need to have the following rewrite rule in place location / { root /var/www/sites/somedomain.com/current; index index.php index.html; # If the file exists as a static file serve it # directly without running all # the other rewrite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/(.+)$ /index.php?url=$1 last; break; } } http://blog.getintheloop.eu/2008/4/17/nginx-engine-x-rewrite-rules-for-cakephp problem is these rewrite assume you run cake directly out of the webroot which is not what I want to do. I have a standard setup for each site i.e. one folder per site containing the following folders log, backup, private and public. Public being where nginx is looking for its files to serve but I have cake installed in private with a symlink in public linking back to /private/cake/ this is my vhost server { listen 80; server_name app.domain.com; access_log /home/public_html/app.domain.com/log/access.log; error_log /home/public_html/app.domain.com/log/error.log; #configure Cake app to run in a sub-directory #Cake install is not in root, but elsewhere and configured #in APP/webroot/index.php** location /home/public_html/app.domain.com/private/cake { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/private/cake/$1 last; break; } } location /home/public_html/app.domain.com/private/cake/ { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/public/index.php?url=$1 last; break; } } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/public_html/app.domain.com/private/cake$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Now like I said I can see the main index.php of cake and have connected it to my DB but this page is without styling so before I proceed any further I would like to configure it correctly. What am I doing wrong………. Thanks seanl

Read the article

Reliable file copy (move) process - mostly Unix/Linux

- by mfinni

Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

Read the article

Why Photoshop CS5's photomerge's result immediately disappear?

- by koiyu

I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

Read the article

FTP script needs blank line

- by Ones and Zeroes

I am trying to determine the reason for some FTP servers requiring a blank line in the script as follows: open server.com username ftp_commands bye Refer to blank line required after username credentials. Example from: FTP from batch file another reference to the same: http://newsgroups.derkeiler.com/Archive/Comp/comp.sys.ibm.as400.misc/2008-05/msg00227.html Also discussed here: archive.midrange.com/midrange-l/200601/msg00048.html "The behavior I'm observing is the same as if I didn't specify the password to login." with an answer referring to our same fix... archive.midrange.com/midrange-l/200601/msg00053.html and archive.midrange.com/midrange-l/200601/msg00065.html Note: It is my experience that FTP questions attract uncouth responses. Admittedly FTP is outdated, but many clients still have legacy systems, which they cannot upgrade or replace. The reason thereof should not be discussed here. The intention of this question is to invite a positive response. Please do not respond if you disagree with the above. If you have never encountered this same issue, please do not respond. I suspect this may be limited to FTP scripts executed from Windows machines, but have been told that this happens often and with many different servers. My specific interest is to understand what may cause this as I have a real world example of a production system suddenly requiring this as a workaround fix, after running for many years without issue. The server belongs to a third party who claims no change on their end. Server details unknown and cannot be determined. Any help or encouragement from someone who has come across the same, would be appreciated. ps. Sorry for the many words and references to painful responses, but I have asked similar questions on serverfault and elsewhere and unfortunately got back kneejerk responses to FTP and respondents debating the validity of the question. I would truly not ask, or re-post this question online if I had a better understanding of the issue. I know of people who have seen this issue, but don't know what causes it. I am wary that this question would again turn into another irrelevant discussion. Please, I ask very nicely: Please do not respond if you have not encountered a similar issue. FURTHER EDIT: Please do not suggest changing the product. The problem is not the blank line requirement. We know this fixes the issue. The problem is not being able to explain the reason for the blank line in the first place. Slight difference, but a critical point to note wrt the answering of this question.

Read the article

Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

- by ScottGu

I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3. You can download and install ASP.NET MVC 3 here. The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features. Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine). Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type. You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach. Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries. ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server. This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends. We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project). Previous releases of ASP.NET MVC included the core jQuery library. ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios). We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation). Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3. This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model. ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4. ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated. This enables richer scenarios where you can validate the current value based on another property of the model. We’ve shipped a built-in [Compare] validation attribute with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC. This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications. These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support). The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project. It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers). You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing. This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server. The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site. It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers. You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner. Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead. Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3. The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release. MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes. Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English. We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days. I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries). You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable. The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects. NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet. The site also now allows developers to optionally submit new packages that they wish to share with others. You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today. We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5. IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios. It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS. Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk. It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios. You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server. The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express. Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables. SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4). SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it. You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine. No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded. SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax. This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE. This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios. With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET). This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments. Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE. It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects. Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables. Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2. These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0. Orchard is a free, open source, community based project. It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard). Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage). Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it. WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development. It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla). Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites. WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination. It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer. Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better. A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Struts 1 ActionForm - retrieving a collection from pure HTML

- by Yaneeve

Hi all I have (just like the rest) inherited some struts 1 code. I have had need to add a few more pages to this project. What I cannot figure out is how to map several distinct but similarly natured input elements to the my ActionForm. Let me elaborate. I create a new <Input> element dynamically as the user inputs more and more items (I use the YUI autocomplete form element and for each entered input I add it as an input element to my form and draw a new YUI autocomplete - complex sounding, I know) So... My form looks a bit like (... after some prettifying and some such...): <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title>My Cool App - Test Case Builder</title> <link rel="stylesheet" type="text/css" href="../script/yui/fonts/fonts-min.css" /> <link rel="stylesheet" type="text/css" href="../skins/myCoolApp/button/button.css" /> <link rel="stylesheet" type="text/css" href="../script/yui/autocomplete/assets/skins/sam/autocomplete.css" /> <link rel="stylesheet" type="text/css" media="screen" href="../skins/myCoolApp/testcase.css" />  <script type="text/javascript" src="../script/yui/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="../script/yui/element/element-min.js"></script> <script type="text/javascript" src="../script/yui/button/button-min.js"></script> <script type="text/javascript" src="../script/yui/datasource/datasource-min.js"></script> <script type="text/javascript" src="../script/yui/autocomplete/autocomplete-min.js"></script>  <script type="text/javascript" src="../script/myCoolApp/myCoolApp.js" ></script> <script type="text/javascript" src="../script/myCoolApp/stack.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/testcase.js"></script> <script type="text/javascript" src="../script/myCoolApp/testcase/default-data.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/data-structs.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/ui-elements.js" ></script> </head> <body class="cf010"> <div id="wrap"> <div id="header"> <div id="main-header"> COOL APP </div> </div> <div id="main-body"> <div id="content"> <div class="col main"> <div id="main"> <form method="post" id="testcaseForm" class="typea" action=""> <fieldset> <legend>Test Case Builder</legend> <div id="tk1" class="tabcontrol"> <ul class="tabs"> <li class="first active"> <a href="#"> <span>General</span> </a> </li> <li class="last"> <a href="#"> <span>Parameters</span> </a> </li> </ul> <div id="tab0" class="tc-panel"> <dl class="cls9"> <dt> <label for="scenario">Choose Scenario:</label> </dt> <dd> <input type="text" id="scenario" name="scenario" class="text" /> <span id="scenarioToggle"></span> <div class="auto-complete" id="scenarioContainer"></div> </dd> <dt> <label for="ruleID">Choose Rule ID:</label> </dt> <dd> <input type="text" id="ruleID" name="ruleID" class="text" /> <span id="ruleIDToggle"></span> <div class="auto-complete" id="ruleIDContainer"></div> </dd> <dt> <label for="Test Case Name" accesskey="t"><span class="accesskey">T</span>est Case Name:</label> </dt> <dd> <input type="text" id="testCaseName" name="testCaseName" class="text" /> </dd> </dl> </div> <div id="tab1" class="tc-panel hidden"> <div class="toolbar" id="action-bar"> <ul> <li class="first"> <a title="select all" href="#" id="btmSelectAll" class="button"> <span>select all</span> </a> </li> <li> <a title="remove row" href="#" id="btmRemove" class="button"> <span>remove row</span> </a> </li> <li> <a title="undo last" href="#" id="btmRollBack" class="button disabled"> <span>undo last</span> </a> </li> <li class="last"> <a title="accept row" href="#" id="btmAccept" class="button disabled"> <span>accept row</span> </a> </li> </ul> </div> <div id="param.list" class="gridclip"> <table id='param.list.tbl' class='grid modela' > <caption>Test Case Summary</caption> <col/><col/><col/> <thead> <tr> <th class='hl center first'> <input class='grid-select-all' type='checkbox' /> <th> <th scope='col'>Row</th> <th scope='col'>Parameter</th> <th scope='col' class='last'>Value</th> </tr> </thead> <tfoot> <tr> <th scope='row'>Total</th> <td colspan='3'>2 parameters as Test Case input</td> </tr> </tfoot> <tbody id='param.list.tbl.body'> <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> <tr class='odd'> <td class='rowcheck center first' /> <td class='id'><em>new</em></td> <td> <dl class='clsTable'> <dt> <input type='text' id='param' name='param' class='text paramInput' /> </dt> <dd> <span id='paramToggle' /> </dd> <div class='auto-complete' id='paramContainer' /> </dl> </td> <td class='last'> <dl class='clsTable'> <dt> <input type='text' id='value' name='value' class='text valueInput' /> </dt> </dl> </td> </tr> </tbody> </table> </div> </div> </div>  </fieldset> <div class="submit-box"> <input type="submit" name="formRun" id="formRun" class="form-save" value="Execute" accesskey="x" title="Run: Press Alt + [Shift] + x" /> <input type="submit" name="formSave" id="formSave" value="Save" accesskey="s" title="Save: Press Alt + [Shift] + s" /> <input type="submit" name="formLoad" id="formLoad" value="Load" accesskey="l" title="Load: Press Alt + [Shift] + l" /> <input type="submit" name="formCancel" id="formCancel" class="form-cancel" value="Cancel" accesskey="c" title="Cancel: Press Alt + [Shift] + c" /> </div> </form> </div> </div> </div> </div> </div> </body> </html> As you can see the following is pretty much a duplicate: <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> The relevant part of my stuts-config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.2//EN" "http://struts.apache.org/dtds/struts-config_1_2.dtd"> <struts-config> <data-sources /> <form-beans> <form-bean name="TestCaseForm" type="com.blahblah.mycoolapp.forms.TestCaseForm" /> </form-beans> <action-mappings> <action path="/pages/SaveTestCase" name="TestCaseForm" type="org.springframework.web.struts.DelegatingActionProxy" scope="request"> </action> </action-mappings> <message-resources parameter="MessageResources" /> </struts-config> I also use spring 2.56 (The relevant part being): <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd"> <bean name="/pages/SaveTestCase" class="com.blahblah.mycoolapp.actions.TestCaseBuilderSaveAction" /> </beans> My Java ActionForm class (from what I had learned off the net) is: package com.blahblah.mycoolapp.forms; import java.util.ArrayList; import java.util.List; import org.apache.struts.action.ActionForm; public class TestCaseForm extends ActionForm { private static final long serialVersionUID = 2352146257739099766L; private String scenario; private String ruleID; private String testCaseName; private List<String> SelectedRows = new ArrayList<String>() ; public String getScenario() { return scenario; } public void setScenario(String scenario) { this.scenario = scenario; } public String getRuleID() { return ruleID; } public void setRuleID(String ruleID) { this.ruleID = ruleID; } public String getTestCaseName() { return testCaseName; } public void setTestCaseName(String testCaseName) { this.testCaseName = testCaseName; } public List<String> getSelectedRows() { return SelectedRows; } public void setSelectedRows(int index, String value) { this.SelectedRows.add(value); } } The question is why do I get an empty SelectedRows in my TestCaseBuilderSave Action? Thanks all who have the patience to read such a long question... and (hopefully) thanks to all you potential saviors :)

Read the article

Secure wipe of a hard drive using WinPE.

- by Derek Meier

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial. There are tons of applications out there that will do it for you. Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable. Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)? Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence. But, we’re dealing with tinfoil hat wearing types here people. DOD standards dictate at least 3 passes, and typically 7 is the preferred amount. I’m not going to argue about data recovery. I have been told to use 7 passes, and so I will. So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data. I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD. Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc. However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date. I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you. I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!! My wife loves talking about WinPE almost as much as talking about Doctor Who. Wait, did I say loves? Hmmmm, I may have meant loathes. The topic at hand? Right. Wiping a drive! I must have drunk too much coffee this morning. I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat: @echo off echo. echo I will completely wipe the local hard drives using echo 7 individual wipes. The data will NOT echo be recoverable. I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment. The clean command will overwrite the master boot record and any hidden sector information – so be careful! sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001 With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible! I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

Read the article

SSAS: Using fake dimension and scopes for dynamic ranges

- by DigiMortal

In one of my BI projects I needed to find count of objects in income range. Usual solution with range dimension was useless because range where object belongs changes in time. These ranges depend on calculation that is done over incomes measure so I had really no option to use some classic solution. Thanks to SSAS forums I got my problem solved and here is the solution. The problem – how to create dynamic ranges? I have two dimensions in SSAS cube: one for invoices related to objects rent and the other for objects. There is measure that sums invoice totals and two calculations. One of these calculations performs some computations based on object income and some other object attributes. Second calculation uses first one to define income ranges where object belongs. What I need is query that returns me how much objects there are in each group. I cannot use dimension for range because on one date object may belong to one range and two days later to another income range. By example, if object is not rented out for two days it makes no money and it’s income stays the same as before. If object is rented out after two days it makes some income and this income may move it to another income range. Solution – fake dimension and scopes Thanks to Gerhard Brueckl from pmOne I got everything work fine after some struggling with BI Studio. The original discussion he pointed out can be found from SSAS official forums thread Create a banding dimension that groups by a calculated measure. Solution was pretty simple by nature – we have to define fake dimension for our range and use scopes to assign values for object count measure. Object count measure is primitive – it just counts objects and that’s it. We will use it to find out how many objects belong to one or another range. We also need table for fake ranges and we have to fill it with ranges used in ranges calculation. After creating the table and filling it with ranges we can add fake range dimension to our cube. Let’s see now how to solve the problem step-by-step. Solving the problem Suppose you have ranges calculation defined like this: CASE WHEN [Measures].[ComplexCalc] < 0 THEN 'Below 0'WHEN [Measures].[ComplexCalc] >=0 AND [Measures].[ComplexCalc] <=50 THEN '0 - 50'...END Let’s create now new table to our analysis database and name it as FakeIncomeRange. Here is the definition for table: CREATE TABLE [FakeIncomeRange] ( [range_id] [int] IDENTITY(1,1) NOT NULL, [range_name] [nvarchar](50) NOT NULL, CONSTRAINT [pk_fake_income_range] PRIMARY KEY CLUSTERED ( [range_id] ASC ) ) Don’t forget to fill this table with range labels you are using in ranges calculation. To use ranges from table we have to add this table to our data source view and create new dimension. We cannot bind this table to other tables but we have to leave it like it is. Our dimension has two attributes: ID and Name. The next thing to create is calculation that returns objects count. This calculation is also fake because we override it’s values for all ranges later. Objects count measure can be defined as calculation like this: COUNT([Object].[Object].[Object].members) Now comes the most crucial part of our solution – defining the scopes. Based on data used in this posting we have to define scope for each of our ranges. Here is the example for first range. SCOPE([FakeIncomeRange].[Name].&[Below 0], [Measures].[ObjectCount]) This=COUNT( FILTER( [Object].[Object].[Object].members, [Measures].[ComplexCalc] < 0 ) ) END SCOPE To get these scopes defined in cube we need MDX script blocks for each line given here. Take a look at the screenshot to get better idea what I mean. This example is given from SQL Server books online to avoid conflicts with NDA. :) From previous example the lines (MDX scripts) are: Line starting with SCOPE Block for This = Line with END SCOPE And now it is time to deploy and process our cube. Although you may see examples where there are semicolons in the end of statements you don’t need them. Visual Studio BI tools generate separate command from each script block so you don’t need to worry about it.

Read the article

Framework 4 Features: Summary of Security enhancements

- by Anthony Shorten

In the last log entry I mentioned one of the new security features in Oracle Utilities Application Framework 4.0.1. Security is one of the major "tent poles" (to borrow a phrase from Steve Jobs) in this release of the framework. There are a number of security related enhancements requested by customers and as a result of internal reviews that we have introduced. Here is a summary of some of the security enchancements we have added in this release: Security Cache Changes - Security authorization information is automatically cached on the server for performance reasons (security is checked for every single call the product makes for all modes of access). Prior to this release the cache auto-refreshed every 30 minutes (or so). This has beem made more nimble by supporting a cache refresh every minute (or so). This means authorization changes are reflected quicker than before. Business Level security - Business Services are configurable services that are based upon Application Services. Typically, the business service inherited its security profile from its parent service. Whilst this is sufficient for most needs, it is now required to further specify security on the Business Service definition itself. This will allow granular security and allow the same application service to be exposed as different Business Services with their own security. This is particularly useful when you base a Business Service on a query zone. User Propogation - As with other client server applications, the database connections are pooled and shared as needed. This means that a common database user is used to access the database from the pool to allow sharing. Unfortunently, this means that tracability at the database level is that much harder. In Oracle Utilities Application Framework V4 the end userid is now propogated to the database using the CLIENT_IDENTIFIER as part of the Oracle JDBC connection API. This not only means that the common database userid is still used but the end user is indentifiable for the duration of the database call. This can be used for monitoring or to hook into Oracle's database security products. This enhancement is only available to Oracle Database customers. Enhanced Security Definitions - Security Administrators use the product browser front end to control access rights of defined users. While this is sufficient for most sites, a new security portal has been introduced to speed up the maintenance of security information. Oracle Identity Manager Integration - With the popularity of Oracle's Identity Management Suite, the Framework now provides an integration adapter and Identity Manager Generic Transport Connector (GTC) to allow users and group membership to be provisioned to any Oracle Utilities Application Framework based product from Oracle's Identity Manager. This is also available for Oracle Utilties Application Framework V2.2 customers. Refer to My Oracle Support KBid 970785.1 - Oracle Identity Manager Integration Overview. Audit On Inquiry - Typically the configurable audit facility in the Oracle Utilities Application Framework is used to audit changes to records. In Oracle Utilities Application Framework the Business Services and Service Scripts could be configured to audit inquiries as well. Now it is possible to attach auditing capabilities to zones on the product (including base package ones). Time Zone Support - In some of the Oracle Utilities Application Framework based products, the timezone of the end user is a factor in the processing. The user object has been extended to allow the recording of time zone information for use in product functionality. JAAS Suport - Internally the Oracle Utilities Application Framework uses a number of techniques to validate and transmit security information across the architecture. These various methods have been reconciled into using Java Authentication and Authorization Services for standardized security. This is strictly an internal change with no direct on how security operates externally. JMX Based Cache Management - In the last bullet point, I mentioned extra security applied to cache management from the browser. Alternatively a JMX based interface is now provided to allow IT operations to control the cache without the browser interface. This JMX capability can be initiated from a JSR120 compliant JMX console or JMX browser. I will be writing another more detailed blog entry on the JMX enhancements as it is quite a change and an exciting direction for the product line. Data Patch Permissions - The database installer provided with the product required lower levels of security for some operations. At some sites they wanted the ability for non-DBA's to execute the utilities in a controlled fashion. The framework now allows feature configuration to allow delegation for patch execution. User Enable Support - At some sites, the use of temporary staff such as contractors is commonplace. In this scenario, temporary security setups were required and used. A potential issue has arisen when the contractor left the company. Typically the IT group would remove the contractor from the security repository to prevent login using that contractors userid but the userid could NOT be removed from the authorization model becuase of audit requirements (if any user in the product updates financials or key data their userid is recorded for audit purposes). It is now possible to effectively diable the user from the security model to prevent any use of the useridwhilst retaining audit information. These are a subset of the security changes in Oracle Utilities Application Framework. More details about the security capabilities of the product is contained in My Oracle Support KB Id 773473.1 - Oracle Utilities Application Framework Security Overview.

Read the article

ODI SDK: Retrieving Information From the Logs

- by Christophe Dupupet

It is fairly common to want to retrieve data from the ODI logs: statistics, execution status, even the generated code can be retrieved from the logs. The ODI SDK provides a robust set of APIs to parse the repository and retreve such information. To locate the information you are looking for, you have to keep in mind the structure of the logs: sessions contain steps; steps containt tasks. The session is the execution unit: basically, each time you execute something (interface, package, procedure, scenario) you create a new session. The steps are the individual entries found in a session: these will be the icons in your package for instance. Or if you are running an interface, you will have one single step: the interface itself. The tasks will represent the more atomic elements of the steps: the individual DDL, DML, scripts and so forth that are generated by ODI, along with all the detailed statistics for that task. All these details can be retrieved with the SDK. Because I had a question recently on the API ODIStepReport, I focus explicitly in this code on Scenario logs, but a lot more can be done with these APIs. Here is the code sample (you can just cut and paste that code in your ODI 11.1.1.6 Groovy console). Just save, adapt the code to your environment (in particular to connect to your repository) and hit "run" //Created by ODI Studioimport oracle.odi.core.OdiInstanceimport oracle.odi.core.config.OdiInstanceConfigimport oracle.odi.core.config.MasterRepositoryDbInfo import oracle.odi.core.config.WorkRepositoryDbInfo import oracle.odi.core.security.Authentication import oracle.odi.core.config.PoolingAttributes import oracle.odi.domain.runtime.scenario.finder.IOdiScenarioFinder import oracle.odi.domain.runtime.scenario.OdiScenario import java.util.Collection import java.io.* /* ----------------------------------------------------------------------------------------- Simple sample code to list all executions of the last version of a scenario,along with detailed steps information----------------------------------------------------------------------------------------- */ /* update the following parameters to match your environment => */def url = "jdbc:oracle:thin:@myserver:1521:orcl"def driver = "oracle.jdbc.OracleDriver"def schema = "ODIM1116"def schemapwd = "ODIM1116PWD"def workrep = "WORKREP1116"def odiuser= "SUPERVISOR"def odiuserpwd = "SUNOPSIS" // Rather than hardcoding the project code and folder name, // a great improvement here would be to parse the entire repository def scenario_name = "LOAD_DWH" /*Scenario Name*/ /* <=End of the update section */ //--------------------------------------//Connection to the repository// Note for ODI 11.1.1.6: you could use predefined odiInstance variable if you are // running the script from a Studio that is already connected to the repository def masterInfo = new MasterRepositoryDbInfo(url, driver, schema, schemapwd.toCharArray(), new PoolingAttributes())def workInfo = new WorkRepositoryDbInfo(workrep, new PoolingAttributes())def odiInstance = OdiInstance.createInstance(new OdiInstanceConfig(masterInfo, workInfo)) //--------------------------------------// In all cases, we need to make sure we have authorized access to the repositorydef auth = odiInstance.getSecurityManager().createAuthentication(odiuser, odiuserpwd.toCharArray())odiInstance.getSecurityManager().setCurrentThreadAuthentication(auth) //--------------------------------------// Retrieve the scenario we are looking fordef odiScenario = ((IOdiScenarioFinder)odiInstance.getTransactionalEntityManager().getFinder(OdiScenario.class)).findLatestByName(scenario_name) if (odiScenario == null){ println("Error: cannot find scenario "+scenario_name); return} //--------------------------------------// Retrieve all reports for the scenario def OdiScenarioReportsList = odiScenario.getScenarioReports() println("*** Listing all reports for Scenario \""+scenario_name+"\" ") //--------------------------------------// For each report, print the folowing:// - start time// - duration// - status// - step reports: selection of details for (s in OdiScenarioReportsList){ println("\tStart time: " + s.getSessionStartTime()) println("\tDuration: " + s.getSessionDuration()) println("\tStatus: " + s.getSessionStatus()) def OdiScenarioStepReportsList = s.getStepReports() for (st in OdiScenarioStepReportsList){ println("\t\tStep Name: " + st.getStepName()) println("\t\tStep Resource Name: " + st.getStepResourceName()) println("\t\tStep Start time: " + st.getStepStartTime()) println("\t\tStep Duration: " + st.getStepDuration()) println("\t\tStep Status: " + st.getStepStatus()) println("\t\tStep # of inserts: " + st.getStepInsertCount()) println("\t\tStep # of updates: " + st.getStepUpdateCount()+'\n') } println("\t")}

Read the article

Top 10 Tips & Tricks for Oracle SQL Developer

- by thatjeffsmith

Being a short week due to the holiday, and with everyone enjoying their Summer vacations (apologies Southern Hemispherians), I reckoned it was a great time to do one of those lazy recap-Top 10-Reader’s Digest type posts. I’ve been sharing 1-3 tips or ‘tricks’ a week since I started blogging about SQL Developer, and I have more than enough content to write a book. But since I’m lazy, I’m just going to compile a list of my favorite ‘must know’ tips instead. I always have to leave out a few tips when I do my presentations, so now I can refer back to this list to make sure I’m not forgetting anything. So without further ado… 1. Configure Your Preferences Yes, there are a LOT of options. But you don’t need to worry about all of them just yet. I do recommend you take a quick look at these ones in particular. Whether you’re new to the tool or have been using it for 5 years, don’t overlook these settings! 2. Disable Extensions You Aren’t Using If you’re not using Data Miner, or if you’re not working on a Migration – disable those extensions! SQL Developer will run leaner & meaner, plus the user interface will be a bit more simplified making the tool easier to navigate as well. 3. SQL Recall via Keyboard Access your history via the keyboard! Cycle through your recent SQL statements just using these magic key strokes! Ctrl+Up or Ctrl+Down. 4. Format Your Query Output Directly to CSV, XML, HTML, etc Have the query results pre-formatted in the format of your choice! Too lazy to run the Export wizard for your query result sets? Just add the SQL Developer output hints to your statement and have the output auto-magically formatted to the style of your choice! 5. Drag & Drop Multiple Tables to the Worksheet SQL Developer will auto-join the related objects. You can then toggle over to the Query Builder to toggle off the columns you don’t want to query. I guarantee this tip will save you time if you’re joining 3 or more tables! 6. Drag & Drop Multiple Tables to a Relational Model A pretty picture is worth a few dozen DDL scripts? SQL Developer does data modeling! If you ctrl-drag a table to a model, it will take that table and any related tables and reverse engineer them to a relational model! You can then print it out or export it to HTML, PDF, etc. 7. View Your PL/SQL Execution Output Automatically Function returns a refcursor? Procedure had 3 out parameters? When you run these programs via the Procedure Editor, we automatically capture the output and place them into one or more data grids for you to browse. 8. Disable Automatic Code Insight and Use It On-Demand Code Editor – Completion Insight – Enable Completion Auto-Popup (Keyword being Auto) Some folks really don’t like it when their IDEs or word-processors try to do ‘too much’ for them. Thankfully SQL Developer allows you to either increase the delay before it attempts to auto-complete your text OR to disable the automatic bit. Instead, you can invoke it on-demand. 9. Interactive Debugging – Change Your Variable Values as You Step Through Your PLSQL Watches aren’t just for watching. You can actually interact with your programs and ‘see what happens’ when X = 256 instead of 1. 10. Ditch the Tree View for the Schema Browser There’s nothing wrong with the Connection tree for browsing your database objects. But some folks just can’t seem to get comfortable with it. So, we built them a Schema Browser that uses a drop down control instead for changing up your schema and object types. Already Know This Stuff, Want More? Just check out my SQL Developer resource page, it’s one of the main links on the top of this page. Or if you can’t find something, just drop me a note in the form of a comment on this page and I’ll do my best to find it or write it for you.

Read the article

SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

- by Brian Jackett

This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan. For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint. This made my third SharePoint Saturday attended and second I’ve spoken at. I believe today it was announced that about 210 people total attended the event. I was very happy with the turnout, especially the ratio of male to female attendees. Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd. So here’s my recap of the weekend. Arrival Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm. I was attempting to avoid the rush hour traffic and construction backups. Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident. I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps. Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner” Fast forward a few hours and it was time for the speaker “dinner.” I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday. By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night. Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot. The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues. As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos. As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V. As such I had prepared all of my demo virtual machines to run under Hyper-V. About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector… As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation. Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive. Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP. Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far. The audience was very engaged in the session and I received some great, positive feedback afterwards. Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below. Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate. As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session Picture Albums For everyone else, here are my pictures from the weekend. The first link is to my FaceBook album which will have tagging (recommend this one.) The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI. As I’ve said so many times, without each and every one of you these events wouldn’t be possible. I thoroughly enjoyed this trip back to my home state and presenting a new session. For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well. Beyond that I haven’t planned out any travels. Thanks for reading my recap. Look forward to more technical posts now that I have a short break in conferences. -Frog Out links: Michigan image

Read the article

Backup options in SharePoint 2007

- by sreejukg

It is very important to make sure the server farm backup is taking properly, making sure that in case of any disaster, the administrator has the latest backup that can be used to restore. This articles addresses some of the options available for backup/restore in SharePoint 2007 Backup There are two options that can be utilized to take backup of SharePoint sites. Using SharePoint Central Administration website Using SharePoint central administration website, you can do backup/restore from user interface. Using central administration website you can back up the following · Server farm · Web application · Content databases Follow these steps to take backup of the server farm using central administration 1. Open Central administration website 2. Navigate to Operations -> Backup and Restore -> Perform a backup 3. Here you will have options to choose the item to back up. Select Farm (the top most item in the list) 4. Once you select the items to backup, click on “Continue to backup options” 5. Select “Full” as type of backup. 6. In the backup file location, enter the path where you need to store the backup. The path should be according to the UNC, for e.g. for c drive you may use \\server\c$\mybackupFolder 7. Click ok 8. Now you will be redirected to Backup and Restore Status page. This page shows the progress for the backup operation. You can use the refresh button to update the status of backup(this page will automatically refresh in every 30 seconds). Once completed you can find the files in the specified folder. Using STSADM website SharePoint comes with a STSADM command line tool. STSADM provides lot of administrative operations that can be performed on SharePoint 2007 sites. You can find STSADM command from the following location C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin (You may change the drive letter according to your installation) STSADM provides a method for performing the Office SharePoint Server 2007 administration tasks at the command line or by using batch files or scripts. STSADM provides access to operations not available by using the Central Administration site The general syntax for STSADM is as follows STSADM -operation Operation Name –parameter1 value1 –parameter2 value2 ……….. Using STSADM you can back up the following · Server farm · Web application · Content databases To perform any STSADM, operation you need to be a member of administrators group. Follow these steps to take backup of SharePoint server farm using STSADM tool. Note: make sure you are logged in to the computer where central administration website is installed. 1. Open the Command prompt (You should run command prompt with administrator privileges) 2. Change the working directory to C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin 3. Enter the command, then press enter Stsadm –o backup -directory <UNC path> -backupmethod full 4. You will get success / failure message once the command finishes. How to schedule the backup There is no option to schedule a backup using central administration site. Also there is no operation provided by STSADM to automate the backup. The farm administrators need to take backup in regular intervals. To achieve this, you can write a batch file that includes STSADM command to take full backup of the server. This batch file can be scheduled using windows task scheduler to execute in certain intervals. Sample of the batch file 1. Open notepad(or any other text editor) 2. Enter the following commands @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm.exe -o backup -directory "<\backup>" -backupmethod full echo completed 3. Save the file with .bat extension You can schedule this batch file as you require. Other Options Using STSADM tool, you will be able to take backup for individual site collection. The syntax for this is stsadm -o backup -url <URL name for site collection> -filename <file name> [-overwrite] The explanations for the parameters are as follows. -url The url of the site collection you need to backup -filename The name of the backup file. E.g. c:\backup.bak -overwrite optional. Indicates if the filename specified exists, whether to overwrite or not. If you are creating the batch file for scheduling the backup for a site collection, you may need to specify the backup filename automatically created. It is an option that you can generate the filename with date so that you can keep backup for each day. e.g. The following commands can be utilized create a site collection backup. @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== echo =============================================================== echo getting todays date to a variable echo =============================================================== @For /F "tokens=1,2,3 delims=/ " %%A in (‘Date /t’) do @( Set Day=%%A Set Month=%%B Set Year=%%C Set todayDate=%%C%%B%%A ) cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm -o backup -url <sitecollection url> -filename \\ServerName\ShareName\Backup_%todayDate%.bak -overwrite echo completed To read more about backup STSADM operation, read this http://technet.microsoft.com/en-us/library/cc263441.aspx

Read the article

ASP.NET List Control

- by Ricardo Peres

Today I developed a simple control for generating lists in ASP.NET, something that the base class library does not contain; it allows for nested lists where the list item types and images can be configured on a list by list basis. Since it was a great fun to develop, I'd like to share it here. Here is the code: [ParseChildren(true)] [PersistChildren(false)] public class List: WebControl { public List(): base("ul") { this.Items = new List(); this.ListStyleType = ListStyleType.Auto; this.ListStyleImageUrl = String.Empty; this.CommonCssClass = String.Empty; this.ContainerCssClass = String.Empty; } [DefaultValue(ListStyleType.Auto)] public ListStyleType ListStyleType { get; set; } [DefaultValue("")] [UrlProperty("*.png;*.gif;*.jpg")] public String ListStyleImageUrl { get; set; } [DefaultValue("")] [CssClassProperty] public String CommonCssClass { get; set; } [DefaultValue("")] [CssClassProperty] public String ContainerCssClass { get; set; } [Browsable(false)] [PersistenceModeAttribute(PersistenceMode.InnerProperty)] public List Items { private set; get; } protected override void Render(HtmlTextWriter writer) { String cssClass = String.Join(" ", new String [] { this.CssClass, this.ContainerCssClass }); if (cssClass.Trim().Length != 0) { this.CssClass = cssClass; } if (String.IsNullOrEmpty(this.ListStyleImageUrl) == false) { this.Style[ HtmlTextWriterStyle.ListStyleImage ] = String.Format("url('{0}')", this.ResolveClientUrl(this.ListStyleImageUrl)); } if (this.ListStyleType != ListStyleType.Auto) { switch (this.ListStyleType) { case ListStyleType.Circle: case ListStyleType.Decimal: case ListStyleType.Disc: case ListStyleType.None: case ListStyleType.Square: this.Style [ HtmlTextWriterStyle.ListStyleType ] = this.ListStyleType.ToString().ToLower(); break; case ListStyleType.LowerAlpha: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-alpha"; break; case ListStyleType.LowerRoman: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-roman"; break; case ListStyleType.UpperAlpha: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-alpha"; break; case ListStyleType.UpperRoman: this.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-roman"; break; } } base.Render(writer); } protected override void RenderChildren(HtmlTextWriter writer) { foreach (ListItem item in this.Items) { this.writeItem(item, this, 0); } base.RenderChildren(writer); } private void writeItem(ListItem item, Control control, Int32 depth) { HtmlGenericControl li = new HtmlGenericControl("li"); control.Controls.Add(li); if (String.IsNullOrEmpty(this.CommonCssClass) == false) { String cssClass = String.Join(" ", new String [] { this.CommonCssClass, this.CommonCssClass + depth }); li.Attributes [ "class" ] = cssClass; } foreach (String key in item.Attributes.Keys) { li.Attributes[key] = item.Attributes [ key ]; } li.InnerText = item.Text; if (item.ChildItems.Count != 0) { HtmlGenericControl ul = new HtmlGenericControl("ul"); li.Controls.Add(ul); if (String.IsNullOrEmpty(this.ContainerCssClass) == false) { ul.Attributes["class"] = this.ContainerCssClass; } if ((item.ListStyleType != ListStyleType.Auto) || (String.IsNullOrEmpty(item.ListStyleImageUrl) == false)) { if (String.IsNullOrEmpty(item.ListStyleImageUrl) == false) { ul.Style[HtmlTextWriterStyle.ListStyleImage] = String.Format("url('{0}');", this.ResolveClientUrl(item.ListStyleImageUrl)); } if (item.ListStyleType != ListStyleType.Auto) { switch (this.ListStyleType) { case ListStyleType.Circle: case ListStyleType.Decimal: case ListStyleType.Disc: case ListStyleType.None: case ListStyleType.Square: ul.Style[ HtmlTextWriterStyle.ListStyleType ] = item.ListStyleType.ToString().ToLower(); break; case ListStyleType.LowerAlpha: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-alpha"; break; case ListStyleType.LowerRoman: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "lower-roman"; break; case ListStyleType.UpperAlpha: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-alpha"; break; case ListStyleType.UpperRoman: ul.Style [ HtmlTextWriterStyle.ListStyleType ] = "upper-roman"; break; } } } foreach (ListItem childItem in item.ChildItems) { this.writeItem(childItem, ul, depth + 1); } } } } [Serializable] [ParseChildren(true, "ChildItems")] public class ListItem: IAttributeAccessor { public ListItem() { this.ChildItems = new List(); this.Attributes = new Dictionary(); this.Text = String.Empty; this.Value = String.Empty; this.ListStyleType = ListStyleType.Auto; this.ListStyleImageUrl = String.Empty; } [DefaultValue(ListStyleType.Auto)] public ListStyleType ListStyleType { get; set; } [DefaultValue("")] [UrlProperty("*.png;*.gif;*.jpg")] public String ListStyleImageUrl { get; set; } [DefaultValue("")] public String Text { get; set; } [DefaultValue("")] public String Value { get; set; } [Browsable(false)] public List ChildItems { get; private set; } [Browsable(false)] public Dictionary Attributes { get; private set; } String IAttributeAccessor.GetAttribute(String key) { return (this.Attributes [ key ]); } void IAttributeAccessor.SetAttribute(String key, String value) { this.Attributes [ key ] = value; } } [Serializable] public enum ListStyleType { Auto = 0, Disc, Circle, Square, Decimal, LowerRoman, UpperRoman, LowerAlpha, UpperAlpha, None } SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

Read the article

Tutorial: Criando um Componente para o UCM

- by Denisd

Então você já instalou o UCM, seguindo o tutorial: http://blogs.oracle.com/ecmbrasil/2009/05/tutorial_de_instalao_do_ucm.html e também já fez o hands-on: http://blogs.oracle.com/ecmbrasil/2009/10/tutorial_de_ucm.html e agora quer ir além do básico? Quer começar a criar funcionalidades para o UCM? Quer se tornar um desenvolvedor do UCM? Quer criar o Content Server à sua imagem e semelhança?! Pois hoje é o seu dia de sorte! Neste tutorial, iremos aprender a criar um componente para o Content Server. O nosso primeiro componente, embora não seja tão simples, será feito apenas com recursos do Content Server. Em um futuro tutorial, iremos aprender a usar classes java como parte de nossos componentes. Neste tutorial, vamos desenvolver um recurso de Favoritos, aonde os usuários poderão marcar determinados documentos como seus Favoritos, e depois consultar estes documentos em uma lista. Não iremos montar o componente com todas as suas funcionalidades, mas com o que vocês verão aqui, será tranquilo aprimorar este componente, inclusive para ambientes de produção. Componente MyFavorites Algumas características do nosso componente favoritos: - Por motivos de espaço, iremos montar este componente de uma forma “rápida e crua”, ou seja, sem seguir necessariamente as melhores práticas de desenvolvimento de componentes. Para entender melhor a prática de desenvolvimento de componentes, recomendo a leitura do guia Working With Components. - Ele será desenvolvido apenas para português-Brasil. Outros idiomas podem ser adicionados posteriormente. - Ele irá apresentar uma opção “Adicionar aos Favoritos” no menu “Content Actions” (tela Content Information), para que o usuário possa definir este arquivo como um dos seus favoritos. - Ao clicar neste link, o usuário será direcionado à uma tela aonde ele poderá digitar um comentário sobre este favorito, para facilitar a leitura depois. - Os favoritos ficarão salvos em uma tabela de banco de dados que iremos criar como parte do componente - A aba “My Content Server” terá uma opção nova chamada “Meus Favoritos”, que irá trazer uma tela que lista os favoritos, permitindo que o usuário possa deletar os links - Alguns recursos ficarão de fora deste exercício, novamente por motivos de espaço. Mas iremos listar estes recursos ao final, como exercícios complementares. Recursos do nosso Componente O componente Favoritos será desenvolvido com alguns recursos. Vamos conhecer melhor o que são estes recursos e quais são as suas funções: - Query: Uma query é qualquer atividade que eu preciso executar no banco, o famoso CRUD: Criar, Ler, Atualizar, Deletar. Existem diferentes jeitos de chamar a query, dependendo do propósito: Select Query: executa um comando SQL, mas descarta o resultado. Usado apenas para testar se a conexão com o banco está ok. Não será usado no nosso exercício. Execute Query: executa um comando SQL que altera informações do banco. Pode ser um INSERT, UPDATE ou DELETE. Descarta os resultados. Iremos usar Execute Query para criar, alterar e excluir os favoritos. Select Cache Query: executa um comando SQL SELECT e armazena os resultados em um ResultSet. Este ResultSet retorna como resultado do serviço e pode ser manipulado em IDOC, Java ou outras linguagens. Iremos utilizar Select Cache Query para retornar a lista de favoritos de um usuário. - Service: Os serviços são os responsáveis por executar as queries (ou classes java, mas isso é papo para um outro tutorial...). O serviço recebe os parâmetros de entrada, executa a query e retorna o ResultSet (no caso de um SELECT). Os serviços podem ser executados através de templates, páginas IDOC, outras aplicações (através de API), ou diretamente na URL do browser. Neste exercício criaremos serviços para Criar, Editar, Deletar e Listar os favoritos de um usuário. - Template: Os templates são as interfaces gráficas (páginas) que serão apresentadas aos usuários. Por exemplo, antes de executar o serviço que deleta um documento do favoritos, quero que o usuário veja uma tela com o ID do Documento e um botão Confirma, para que ele tenha certeza que está deletando o registro correto. Esta tela pode ser criada como um template. Neste exercício iremos construir templates para os principais serviços, além da página que lista todos os favoritos do usuário e apresenta as ações de editar e deletar. Os templates nada mais são do que páginas HTML com scripts IDOC. A nossa sequência de atividades para o desenvolvimento deste componente será: - Criar a Tabela do banco - Criar o componente usando o Component Wizard - Criar as Queries para inserir, editar, deletar e listar os favoritos - Criar os Serviços que executam estas Queries - Criar os templates, que são as páginas que irão interagir com os usuários - Criar os links, na página de informações do conteúdo e no painel My Content Server Pois bem, vamos começar! Confira este tutorial na íntegra clicando neste link: http://blogs.oracle.com/ecmbrasil/Tutorial_Componente_Banco.pdf Happy coding! :-)

Read the article

FireFox 6 Super Slow? Cache Settings Corruption

- by Rick Strahl

For those of you that follow me on Twitter, you've probably seen some of my tweets regarding major performance problems I've seen with the install of FireFox 6.0. FireFox 6.0 was released a couple of weeks ago and is treated as a 'force feed' update for FireFox 5.0. I'm not sure what the deal is with this braindead versioning that Mozilla is doing with major version releases coming out, what now every other month? Seriously that's retarded especially given the limited number of new features these releases bring, and the upgrade pain for plug-ins that the major version release causes. Anyway, after the FireFox updater bugged me long enough I finally gave in last week and updated to FireFox 6. Immediately after install I noticed terrible performance. Everything was running at a snail's pace with Web pages loading slowly and most content actually slowly 'painting' the page. A typical sign of content downloading slowly. However these are pages that should be mostly cached on my system and even repeated accesses ran just as slow. Just for a reality check I ran the same sites in Chrome (blazing fast) and IE (fast enough :-)) but FireFox - dog on a stick. Why so slow Boss? While complaining lots of people recommended to ditch FireFox - use Chrome, yada yada yada. Yeah, Chrome is fast and getting better but I have a number of plug-ins that I use in FF that I can't easily give up. So I suffered and started looking around more closely at what was happening. The first thing I noticed when accessing pages was that I continually saw accesses to the Google CDN downloading jQuery and jQuery UI. UI especially is pretty heavy in size and currently I'm in a location with a fairly slow IP connection where large files are a bit of an issue. However, seeing the CDN urls pop up repeatedly raised a flag with me. That stuff should be caching and it looked like each and every hit was reloading these scripts and various images over and over again. Fired up FireBug and sure enough I saw something like this on a repeated hit to my blog: Those two highlights are jquery and the main CSS file for the site and both are being loaded fully and taking a while to load. However, since this page had been loaded before, these items should be cached and show 304 requests instead of the full HTTP requests returning 200 result codes. In short it looked like FireFox was not caching ANY content at all and constantly reloading all page resources. No wonder things were running dog slow. Once I realized what the problem was I took a look in the about:config settings and lo and behold a bunch of the cache settings were set to not cache: In my case ALL the main cache flags were set to false for some reason that I can't figure out. It appears that after the FireFox 6 update these flags somehow mysteriously changed and performance took a nose dive. Switching the .enable flags back to true and resetting all the cache settings tote default reverted performance back to the way it's supposed to be: reasonably fast and snappy as soon as content is cached and accessed again from cache. I try not to muck with the about:config settings much (other than turning off the IPV6 option) but when there are problems access to these features can be really nice. However, I treat this as a last resort so it took me quite some time before I started looking through ALL the settings. This takes a while, not knowing what I was looking for exactly. If Web load performance is slow it's a good idea to check the cache settings. I have no idea what hosed these settings for me - I certainly didn't explicitly set them in about:config and while in FireFox's Options dialog I didn't see any option that would affect global caching like this, so this remains a mystery to me. Anyway, I hope that this is helpful to some, in case some of you end up running into a similar issue.© Rick Strahl, West Wind Technologies, 2005-2011Posted in FireFox Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

SQL SERVER – An Efficiency Tool to Compare and Synchronize SQL Server Databases

- by Pinal Dave

There is no need to reinvent the wheel if it is already invented and if the wheel is already available at ease, there is no need to wait to grab it. Here is the similar situation. I came across a very interesting situation and I had to look for an efficient tool which can make my life easier and solve my business problem. Here is the scenario. One of the developers had deleted few rows from the very important mapping table of our development server (thankfully, it was not the production server). Though it was a development server, the entire development team had to stop working as the application started to crash on every page. Think about the lost of manpower and efficiency which we started to loose. Pretty much every department had to stop working as our internal development application stopped working. Thankfully, we even take a backup of our development server and we had access to full backup of the entire database at 6 AM morning. We do not take as a frequent backup of development server as production server (naturally!). Even though we had a full backup, the solution was not to restore the database. Think about it, there were plenty of the other operations since the last good full backup and if we restore a full backup, we will pretty much overwrite on the top of the work done by developers since morning. Now, as restoring the full backup was not an option we decided to restore the same database on another server. Once we had restored our database to another server, the challenge was to compare the table from where the database was deleted. The mapping table from where the data were deleted contained over 5000 rows and it was humanly impossible to compare both the tables manually. Finally we decided to use efficiency tool dbForge Data Compare for SQL Server from DevArt. dbForge Data Compare for SQL Server is a powerful, fast and easy to use SQL compare tool, capable of using native SQL Server backups as metadata source. (FYI we Downloaded dbForge Data Compare) Once we discovered the product, we immediately downloaded the product and installed on our development server. After we installed the product, we were greeted with the following screen. We clicked on the New Data Comparision to start our new comparison project. It brought up following screen. Here is the best part of the product, we just had to enter our database connection username and password along with source and destination details and we are done. The entire process is very simple and self intuiting. The best part was that for the source, we can either select database or even backup. This was indeed fantastic feature. Think about this, if you have a very big database, it will take long time to restore on the server. Once it is restored, you will be able to work with it. However, when you are working with dbForge Data Compare it will accept database backup as your source or destination. Once I click on the execute it brought up following screen where it displayed an excellent summary of the data compare. It has dedicated tabs for the what is changing in what table as well had details of the changed data. The best part is that, once we had reviewed the change. We click on the Synchronize button in the menu bar and it brought up following screen. You can see that the screen has very simple straight forward but very powerful features. You can generate a script to synchronize from target to source or even from source to target. Additionally, the database is a very complicated world and there are extensive options to configure various database options on the next screen. We also have the option to either generate script or directly execute the script to target server. I like to play on the safe side and I generated the script for my synchronization and later on after review I deployed the scripts on the server. Well, my team and we were able to get going from our disaster in less than 10 minutes. There were few people in our team were indeed disappointed as they were thinking of going home early that day but in less than 10 minutes they had to get back to work. There are so many other features in dbForge Data Compare for SQL Server, I am already planning to make this product company wide recommended product for Data Compare tool. Hats off to the team who have build this product. Here are few of the features salient features of the dbForge Data Compare for SQL Server Perform SQL Server database comparison to detect changes Compare SQL Server backups with live databases Analyze data differences between two databases Synchronize two databases that went out of sync Restore data of a particular table from the backup Generate data comparison reports in Excel and HTML formats Copy look-up data from development database to production Automate routine data synchronization tasks with command-line interface Go Ahead and Download the dbForge Data Compare for SQL Server right away. It is always a good idea to get familiar with the important tools before hand instead of learning it under pressure of disaster. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

Read the article

SQL SERVER – Simple Example of Incremental Statistics – Performance improvements in SQL Server 2014 – Part 2

- by Pinal Dave

This is the second part of the series Incremental Statistics. Here is the index of the complete series. What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1 Simple Example of Incremental Statistics – Performance improvements in SQL Server 2014 – Part 2 DMV to Identify Incremental Statistics – Performance improvements in SQL Server 2014 – Part 3 In part 1 we have understood what is incremental statistics and now in this second part we will see a simple example of incremental statistics. This blog post is heavily inspired from my friend Balmukund’s must read blog post. If you have partitioned table and lots of data, this feature can be specifically very useful. Prerequisite Here are two things you must know before you start with the demonstrations. AdventureWorks – For the demonstration purpose I have installed AdventureWorks 2012 as an AdventureWorks 2014 in this demonstration. Partitions – You should know how partition works with databases. Setup Script Here is the setup script for creating Partition Function, Scheme, and the Table. We will populate the table based on the SalesOrderDetails table from AdventureWorks. -- Use Database USE AdventureWorks2014 GO -- Create Partition Function CREATE PARTITION FUNCTION IncrStatFn (INT) AS RANGE LEFT FOR VALUES (44000, 54000, 64000, 74000) GO -- Create Partition Scheme CREATE PARTITION SCHEME IncrStatSch AS PARTITION [IncrStatFn] TO ([PRIMARY], [PRIMARY], [PRIMARY], [PRIMARY], [PRIMARY]) GO -- Create Table Incremental_Statistics CREATE TABLE [IncrStatTab]( [SalesOrderID] [int] NOT NULL, [SalesOrderDetailID] [int] NOT NULL, [CarrierTrackingNumber] [nvarchar](25) NULL, [OrderQty] [smallint] NOT NULL, [ProductID] [int] NOT NULL, [SpecialOfferID] [int] NOT NULL, [UnitPrice] [money] NOT NULL, [UnitPriceDiscount] [money] NOT NULL, [ModifiedDate] [datetime] NOT NULL) ON IncrStatSch(SalesOrderID) GO -- Populate Table INSERT INTO [IncrStatTab]([SalesOrderID], [SalesOrderDetailID], [CarrierTrackingNumber], [OrderQty], [ProductID], [SpecialOfferID], [UnitPrice], [UnitPriceDiscount], [ModifiedDate]) SELECT [SalesOrderID], [SalesOrderDetailID], [CarrierTrackingNumber], [OrderQty], [ProductID], [SpecialOfferID], [UnitPrice], [UnitPriceDiscount], [ModifiedDate] FROM [Sales].[SalesOrderDetail] WHERE SalesOrderID < 54000 GO Check Details Now we will check details in the partition table IncrStatSch. -- Check the partition SELECT * FROM sys.partitions WHERE OBJECT_ID = OBJECT_ID('IncrStatTab') GO You will notice that only a few of the partition are filled up with data and remaining all the partitions are empty. Now we will create statistics on the Table on the column SalesOrderID. However, here we will keep adding one more keyword which is INCREMENTAL = ON. Please note this is the new keyword and feature added in SQL Server 2014. It did not exist in earlier versions. -- Create Statistics CREATE STATISTICS IncrStat ON [IncrStatTab] (SalesOrderID) WITH FULLSCAN, INCREMENTAL = ON GO Now we have successfully created statistics let us check the statistical histogram of the table. Now let us once again populate the table with more data. This time the data are entered into a different partition than earlier populated partition. -- Populate Table INSERT INTO [IncrStatTab]([SalesOrderID], [SalesOrderDetailID], [CarrierTrackingNumber], [OrderQty], [ProductID], [SpecialOfferID], [UnitPrice], [UnitPriceDiscount], [ModifiedDate]) SELECT [SalesOrderID], [SalesOrderDetailID], [CarrierTrackingNumber], [OrderQty], [ProductID], [SpecialOfferID], [UnitPrice], [UnitPriceDiscount], [ModifiedDate] FROM [Sales].[SalesOrderDetail] WHERE SalesOrderID > 54000 GO Let us check the status of the partition once again with following script. -- Check the partition SELECT * FROM sys.partitions WHERE OBJECT_ID = OBJECT_ID('IncrStatTab') GO Statistics Update Now here has the new feature come into action. Previously, if we have to update the statistics, we will have to FULLSCAN the entire table irrespective of which partition got the data. However, in SQL Server 2014 we can just specify which partition we want to update in terms of Statistics. Here is the script for the same. -- Update Statistics Manually UPDATE STATISTICS IncrStatTab (IncrStat) WITH RESAMPLE ON PARTITIONS(3, 4) GO Now let us check the statistics once again. -- Show Statistics DBCC SHOW_STATISTICS('IncrStatTab', IncrStat) WITH HISTOGRAM GO Upon examining statistics histogram, you will notice that now the distribution has changed and there is way more rows in the histogram. Summary The new feature of Incremental Statistics is indeed a boon for the scenario where there are partitions and statistics needs to be updated frequently on the partitions. In earlier version to update statistics one has to do FULLSCAN on the entire table which was wasting too many resources. With the new feature in SQL Server 2014, now only those partitions which are significantly changed can be specified in the script to update statistics. Cleanup You can clean up the database by executing following scripts. -- Clean up DROP TABLE [IncrStatTab] DROP PARTITION SCHEME [IncrStatSch] DROP PARTITION FUNCTION [IncrStatFn] GO Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SQL Statistics, Statistics

Search Results

Search found 5786 results on 232 pages for 'umbraco scripts'.

Page 211/232 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >

- by dotancohen

- by David

- by jessie

- by user568458

- by dcerecedo

- by WMIF

- by cespinoza

- by seanl

- by mfinni

- by koiyu

- by Ones and Zeroes

- by ScottGu

- by Yaneeve

- by Derek Meier

- by DigiMortal

- by Anthony Shorten

- by Christophe Dupupet

- by thatjeffsmith

- by Brian Jackett

- by sreejukg

- by Ricardo Peres

- by Denisd

- by Rick Strahl

- by Pinal Dave

- by Pinal Dave

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218 | Next Page >