Search Results

Search found 6870 results on 275 pages for 'usb powered'.

Page 211/275 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• WiFi: Connect to a network with hidden SSID in Windows 7

  - by Dor

  I have Windows 7 with the following station: D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.A2) (driver version 3.5.0.21). I'm trying to connect to a wireless network that has an hidden SSID with the command: Netsh wlan connect name="myNetworkProfile" The profile is configured to connect even if the network is not broadcasting its name (SSID). Despite that, the command fails promptly every time with the message: The network specified by profile "myNetworkProfile" is not available to connect. Nonetheless, when trying to connect manually using the dialog box (see image below), it successfully connects to the network after about 10 or 15 seconds. Also, Please - no need to elaborate about how useless the hidden SSID feature is.

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• How to go about scheduling a task in windows 7 to change wireless connection

  - by Skindeep2366

  This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

• Backup and restore.

  - by Xavierjazz

  I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• How to install Windows7 on Hitachi HTS545050a7e380 harddrive?

  - by wurlog

  I have a Samsung NP530U3B with a Hitachi HTS545050a7e380 Harddrive. In the Bios it shows as one drive Hitachi hts545050a7e380 When I try to install Windows 7 it show 2 drives in the setup Drive 0 with 15 GB Drive 1 with 460 GB Guess it is a hybrid of SSD and normal harddrive, right? I tried to install it on the second drive, but after restarting it goes back into the beginning of the Windows 7 installation. The installation routine automatically activated a 100 MB partition on Drive 0. I guess for the bootmanager. Second try: Installation on the 15GB drive. The same. After reboot it wants to install win7 all over again. If I remove the USB Stick I get the message "Missing operation system" Any ideas?

  Read the article

• Is this processor burned?

  - by Jhonnytunes

  I've recently exchange the processors in two PCChips boards. Both boards are LGA775. Board A is P17G(Pentium 4 HyperThreading 3GHz) and board B is P49G(Pentium Dual Core 3GHz). I use board A to watch videos, and some of them are 3GB size and this is why I exchanged the CPU. I installed Dual Core in board A and it worked out of the box, now 3GB videos use 5% of CPU instead of 50%. When I installed the pentium in the board B, I forgot to connect the 4pin power and, when i powered on the PC, the CPU fan stay off. Then, I connected all right this time, and now the board doesnt show video. I think the CPU is not working but im not sure about that. The PC turns on and the HD spins, the CPU fan spins, network socket blinking, but not video and case power led is neither blinking. I tried with other PSU and everything was the same. I figure out that CPU have that paste above. IDK really what's happening, I hope I dont have to buy another CPU. Is it Burned?

  Read the article

• Laptop battery holds charge, but won't charge any more.

  - by Jeff

  Ok, I'm sure I will need to replace either my battery or my AC adapter, but would rather not buy one if the other is the problem. My problem is. I have a Sager laptop that gets quite a bit of use. The charging has always been a little bit odd. If I was in the process of using it, it would charge just fine and stay On AC power. If I left it alone, however(power settings to ONLY turn off the monitor) in either Ubuntu or Windows 7 it decides that it didn't want to use AC power anymore and would just start draining the battery until it died. Now, suddenly, it won't charge at all. The capacity was great up to this point which happened in an instant. It will recognize the battery but won't see the AC power if plugged in while the battery is in. I can power up the laptop without the battery and it works fine. If I plug in the battery while powered up it will claim it's charging it, but it stays at the same percentage. If I unplug the power, it will switch over to Battery fine, but I have to power down and unplug the battery to get it back on AC power. I've had dying/dead batteries before but they typically won't hold a full charge anymore but it still winds up to 100% then drops quickly when unplugged. This seems more like a chip problem in the battery to me, but I'm not sure. Any ideas?

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

• Netgear WNR1000 WiFi speed

  - by Kamil Klimek

  I have Netgear WNR1000 150N, Macbook Pro 13" with Broadcom BCM43xx 1.0, Network connection 60mbps When I connect through the cable I easily get around 60mbps. When I go through the WiFi it's capable to get only 32mbps at tops. Any ideas why is that? Is that my router limitation or maybe my WiFi card? If it is routers fault what router would you suggest. Best router would be with usb port for external hard drive. Forgot to add screenshot with connection details: Szybkosc transmisji == Transmission speed

  Read the article

• UPS for hard drive protection

  - by dimi

  I am in a place where electricity is not ideal (old house, no ground), sometimes it occasionally shuts down and supposedly there are some spikes. I consider using UPS with the goal to increase safety of my personal data. My first priority is the health of my internal and external USB hard drives which can be damaged due to possible power instability. I do not care that much about possible losses of not-saved work, instead I just want to let my system have a minimum time to turn off without any risk of physical damaging my hard drives. Would a cheap offline UPS suit my neads? Or do i need a better one with automatic voltage regulator (AVR)? How critical is AVR for the hard drives? The external ones require their own power supplies and will be plugged directly into UPS.

  Read the article

• Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

  - by user33521

  We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

  Read the article

• Linux says a kernel module has an unknown symbol, but another loaded module provides it.

  - by raldi

  I'm trying to install a driver for a USB DAQ box, which annoyingly, I have to compile myself. I believe I've succeeded -- I have two .ko files: -rw-r--r-- 1 root root 45271 2010-03-18 21:24 advdrv_core.ko -rw-r--r-- 1 root root 24312 2010-03-18 21:24 usb4761.ko I was able to run insmod on the first without incident, but when I try on the second, I get a flood of messages: kernel: [686782.106547] usb4761: no symbol version for adv_process_info_check_event kernel: [686782.106555] usb4761: Unknown symbol adv_process_info_check_event kernel: [686782.106691] usb4761: no symbol version for advdrv_unregister_driver kernel: [686782.106695] usb4761: Unknown symbol advdrv_unregister_driver However, advdrv_core.ko provides these symbols. My kernel sure seems to have them in memory: # cat /proc/kallsyms | grep advdrv_unregister_driver f8d88504 r __ksymtab_advdrv_unregister_driver [advdrv_core] f8d888d2 r __kstrtab_advdrv_unregister_driver [advdrv_core] f8d885a4 r __kcrctab_advdrv_unregister_driver [advdrv_core] 086eb8fb a __crc_advdrv_unregister_driver [advdrv_core] f8d86e90 t advdrv_unregister_driver [advdrv_core] Why does my insmod claim they're unknown symbols?

  Read the article

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Why does the EFI shell not detect my Windows DVD?

  - by Oliver Salzburg

  I'm currently looking into (U)EFI for the first time and am already really confused. I insert the Windows Server 2008 R2 Enterprise disc into the DVD-ROM and boot into the EFI shell. The shell will automatically list all detected devices, which are: blk0 :CDRom - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master)/CDROM(Entry0) blk1 :BlockDevice - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master) To my understanding, it should have already detected the filesystem on blk0 and should have mounted it as fs0. Why is that not happening? If I insert a USB drive, it gets mounted just fine. The board is an Intel S5520HC in case that makes a difference.

  Read the article

• Can't run Ubuntu from disc

  - by alex

  When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

  Read the article

• increase performance of virtual machines on the 27" imac

  - by evan

  I'm using a 27" iMac (i7, 8GB RAM) at work and normally run two or three virtual machines at the same time, which hurts the performance of each virtual machine. I've learned on these forums the best way to increase virtual machine performance (aside from RAM) is to have them running on a separate hard drive from the one the OS is on. Of course with the iMac you can only have one hard drive and not even an SAS or solid state drive (well you could probably take it apart and put one in yourself but I wouldn't be permitted to do that). That being said, do you think it would help to run one or more virtual machines from a firewire external drive (or a usb 2.0)? Thanks for your input!

  Read the article

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• Exchange enrypted messages with a single recipient [portable]

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• Windows7 access to Printer shared with XP ?

  - by chmike

  I have, at home, an eeebox running with XP 24/24 with an attached printer (Canon IP5300) installed as shared. We have a few other laptops and PC, all with vista, that can access and print on the shared printer without problem. We just received a new Dell computer with Windows7-64 on it, but it fails to connect the shared printer. I tried connecting the printer with its USB cord directly to the Windows7 PC and the required driver was automatically downloaded and installed. I could then access the printer specific properties, etc. But if I connect it back to the XP computer, the windows7 PC still refused to connect to the remote printer although it now have the drivers. The windows7 is a family pack. By the way, I also have an old canon scanner still perfectly working with XP, but for which I can't find compatible drivers for windows 7. Do I have to buy a new one ? Any help would be welcome.

  Read the article

• Windows cannot access my external harddisk partition but all partition managers can

  - by Ashish

  Some weird problem happened to my Maxtor 500GB external harddisk, it all started when it once freezed during some operation. Now when I insert the drive in a USB slot, Windows asks me to format it, and if I try to open the drive from my computer it says, "not accessible".. I tried most of the major partition managers and partition recovery software. All of these can see and access my partition normally. It showing the free space and used space correctly. But Windows can't. Please help me out. Including a screenshot: On the left side, the partition manager can access and see my data in the corrupted partition, and on the right side Windows can't

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >