Search Results

Search found 12337 results on 494 pages for 'developer express'.

Page 212/494 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • VGA no signal on LCD monitor attached to laptop

    - by Paul
    I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

    Read the article

  • 32bit Application Memory Usage on 64bit Windows 7

    - by Brian
    I have an early 2012 Macbook Pro with and Intel I7 processor and 16 gigs RAM running Windows 7 Professional 64bit via Bootcamp. I work in Geographical Information Systems as a programmer so most of the applications I am running are 32bit Applications, but tend to use a lot of resources (i.e. ArcGIS, SQL Server Express, Visual Studio, etc.). I have been noticing that when I have multiple instances of either the same 32bit application or different 32bit applications and they are all working on hefty processing tasks, I am still only topping out at about 30% memory use. I understand 32bit applications are limited to less than 4gb RAM, but I assumed that one instance could use its own 4gb while another instance could use another 4gb to take full advantage of all the memory I have installed. Can anyone explain how this works and how I can get my applications to take advantage of all my memory via running multiple instances?

    Read the article

  • Why does 1GBit card have output limited to 80 MiB ?

    - by Gallus
    I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

    Read the article

  • remove words containing non-alpha characters

    - by dnkb
    Given a text file with space separated string and a tab separated integer, I'd ;like to get rid of all words that have non-alpha characters but keep words consisting of alpha only characters and the tab plus the integer afterwards. My attempts like the ones below didin't yield any good. What I was trying to express is something like: "replace anything within word boundaries that starts and ends with 0 or more whatever and there is at least one :digits: or :punct: in between". sed 's/\b.[:digits::punct:]+.\b//g' sed 's/\b.[^:alpha:]+.\b//g' What am I missing? See sample input data below. Thank you! asdf 754m 563 a2a 754mm 291 754n 463 754 ppp 1409 754pin 4652 pin pin 462 754pins 652 754 ppp 1409 754pin 4652 pi$n pin 462 754/p ins 652 754 pp+p 1409 754 p=in 4652

    Read the article

  • 2nd/3rd version of wireless network appears

    - by neildeadman
    I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

    Read the article

  • Best software for creating icons?

    - by John
    Hi, I'm a developer,but not very good designer.I need a lightweight software for creating icons for my applications. I have a logo of the product and want to make it an icon,please suggest the best software for that. NOTE: I do not need software for creating icons from scratch,but from large image to .ico.Something that will help me. Thanks in advance

    Read the article

  • SQL Server Management Studio - Error connecting to remote DB

    - by Julien Poulin
    All right, here is the deal: I'm connecting to a Windows 2003 Server using VPN. On this server, there is a remote SQL Server 2005 Express engine. I can connect to the database using Visual Studio 2008. What I can't do though, is connect to this same database with SQL Server 2005 Management Studio (Standard). I have checked the connection info a hundred times and still nothing. One thought: do VS ans SSMS use the same sql provider? Note: I'm running Windows 7 RC. I had absolutely no problem using the same config under Vista. This is the error I get when trying to connect with SSMS:

    Read the article

  • Cheapest way to go for somebody who wants to accept payments, but won't be accepting hundreds of ord

    - by blockhead
    I have a client who lectures, and wants to sell spots to his lecture online. I would preferably like to set him up with a solution that allows me to collect billing information on his site. My experience with e-commerce is in using solutions like Authorize.net, however this does not seem cost effective since I can't imagine he's making a huge profit off of this. I'm afraid he would lose money in the cost of using Authorize.net (or any payment gateway for the matter). I could use google checkout or paypal express, but this would require me to leave his site (although with google checkout, it looks like, from a glance, that I could just submit to their form from my server, and likely with paypal as well, but I don't know if this is against their TOS). What is the most cost-effective solution for accepting credit card payments in this situation?

    Read the article

  • About the External Graphics Card and CPU usage

    - by Balaji
    Hi, We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration fo the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 straems. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise no difference, even worst. So, what is the pupuse of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage? Please do the needful as soon as possible. Regards Balaji

    Read the article

  • Install WAS 7.0 on RHEL 6

    - by Madhur Ahuja
    I am trying to install Websphere 7 x64 on RHEL 6 x64. I am using Developer edition. When I try to execute ./install on the command prompt, it waits for few seconds and then returns to prompt without any error. I have installed all the pre-requisites as listed in this article: http://pic.dhe.ibm.com/infocenter/wasinfo/v7r0/index.jsp?topic=%2Fcom.ibm.websphere.installation.base.doc%2Finfo%2Faes%2Fae%2Ftins_linuxsetup_rhel6.html Any idea how to troubleshoot this ?

    Read the article

  • Integrated Graphics and Audio as Media Center?

    - by Will
    I'm considering setting up a PC as a Media Center. Mainly to watch movies (ideally HD quality) and listening to music, but also to perform tasks like e-mail, web browsing, ... I quite like the looks and the price of this barebone: http://www.asus.de/Barebone_PC/S_Series_7L/S2P8H61E However it comes with integrated graphics and audio and only has one free PCI-Express slot. Which would mean in the worst case, where both integrated graphics and audio turn out to be insufficient, I could only upgrade one. So is integrated graphics and audio sufficient for a media center solution? Cheers, Will

    Read the article

  • Missing HDD space - says 65GB used, selecting all folders shows 40GB used

    - by Igor K
    Hi Running Windows Server 2008, 74GB raptor drive and noticed we only had about 500MB left - yikes! So deleted some old backups we don't need, but can't track down where about 25GB seems to be taken up. If I go to C: and select all folders and go to properties, this comes to around 40GB but in My Computer I can see 65GB is used. How can I find out whats eating the space? Just IIS + MSSQL Express + Smartermail on the server EDIT Checked to show hidden folders plus protected operating system files - 41.8GB usage, so 24.6GB is missing somewhere. Theres no system restore even installed on the server

    Read the article

  • How to get access to console to reset Cisco 3750?

    - by genehack
    I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

    Read the article

  • Cannot connect to WEBrick on home network

    - by Chris Stewart
    I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

    Read the article

  • SQL 2008 Report Manager not working

    - by Fatherjack
    I have a SQL 2008 developer edition with SSRS and the report manager is only available from the local machine. If I try to access it from any other machine I get challenged for my domain u/name and pwd 3 times and then the screen stays blank. I have made changes to some config files (originals copied out) in order to get a 3rd party application to run but that is now uninstalled and the config files are all back to vanilla (originals copied back in) I feel its something to do with authentication but am stuck ... any suggestions welcomed Jonathan

    Read the article

  • About the External Graphics Card and CPU usage

    - by Balaji
    We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

    Read the article

  • Wireless router not connection -> AP Not associated

    - by candido
    I can not connect to internet by wireless router after some months with ubuntu 10.04. I can connect with the same portable but with win OS. My SO is ubuntu 10.04 linux 2.6.32-41 arch SMP i686. The internet wireless network controller is Atheros AR9285 chipset (pci express) Kernel module ath9k I have tried a command line connection: $ sudo /etc/init.d/network-manager stop #stop gui network manager $ iwconfig wlan0 essid WLAN_3C key s:C001D20550B3C $ ifconfig Access Point: NOT-ASSOCIATED $dmesg ... AP 00:1a:2b:08:60:49 associated Is the SO has connected to router for booting long ( associated message), after boot and login why the connection to router is not possible by network-manager or command line (NOT associated message)? Thanks in advance

    Read the article

  • Viewing and deleting partitions using the BIOS?

    - by cluelesscoder
    I have an M4A785TD-M EVO Asus motherboard which uses Asus Express Gate for its motherboard (says American Megatrends, Inc at the bottom). I activate it by pressing Del; also says Tab activates BIOS Post but that doesn't seem to do anything. I went into this expecting to see a breakdown of the partitions. I have a 300GB hard-drive separated into 3 partitions. While it does show SATA for my main hard-drive and my disk drive, it doesn't show the partitions. Is this typical? Do I have to us an OS-based tool to delete the partitions or can I delete using my BIOS? I tried updating the BIOS through Asus's Update utility but it appears to be broken (connects/disconnects repeatedly). I used HWiNFO32 to get some information: BIOS Date: 06/30/10 BIOS Version: 2103 EFI BIOS: Not Capable Tried to update but it directs me to biosagentsplus.com which wants $30 for the download (another question would be how to avoid them).

    Read the article

  • Windows 2003 SMTP virtual server, why emails are not delivered?

    - by bardan
    Configured Windows 2003 as my email client, everything works fine with POP3 (i'm able to recieve emails), the problem is with SMTP and i can't figure out how to find where excatly this problem is, because email looks like it is sent, but recipients don't recieve anything... i had some problems with relying, but fixed everything, and now i configured outlook express on the same machine, trying to send emails and it looks everything fine, email goes to SENT folder, no errors, but recipients (tried several diffrent) don't revieve any letters... tried to test from the same machine with telnet like it described there http://support.microsoft.com/kb/153119 ant everything looks ok...

    Read the article

  • mac + parallels and https site test = router restarts

    - by Erik
    Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

    Read the article

  • How to tell if OpenGL is really working in Ubuntu 10.04

    - by Jonathan
    I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

    Read the article

  • Using VirtualBox/VMWare to deploy software to multi sites ?

    - by Sim
    Hi all, I'm currently evaluating the feasibility of using VirtualBox (or VMWare) to deploy the follow project to 10 sites Windows XP MSSQL 2005 Express Edition with Advanced Services JBoss to run 1 in-house software that mostly query master data (customers/products) and feed to other software Why I want to do this ? Because the IT staffs in my 10 sites are not capable enough and the steps taken to setup those "in-house project" are also complicated What are the cons I can forsee ? Need extra power to run that virtualbox instance The IT staffs won't be much knowledgeable 'bout how to install the stuffs Cost (license for VirtualBox in commercial environment as well as extra OS license) I really seek your inputs on the pro/con of this approach, or any links that I can read further Thanks a lot

    Read the article

  • SQL server periodically gets disconnected

    - by Maulin
    Hi, Our environment is: Windows Server 2003, Service Pack 2 SQL Server Express 2005 SQLServer JDBC driver 1.2 (also tried Jtds) Sun JDK 1.6 (we tried this on JDK 1.5 as well) There is no virus protection software on the host, and no firewall is enabled. We have Web application deployed in JBOSS 4.0.2. Our problem is that the JDBC connection to SQL server periodically gets disconnected, and then we can't reconnect to the SQL server at all, unless we physically restart the server on which JBOSS deployed. we are getting following error in log. Software caused connect on abort: recv failed Note: We are able to connect to SQL server using sample java test class. Any suggestions would be most appreciated, as this is a serious, mission-criticial problem for us right now.

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >