triple boot - Page 212 - Developer IT

Performance associated with storing millions of files on NTFS

- by Tim Brigham

Does anyone have a method / formula, etc that I could use - hopefully based on both current and projected numbers of files - to project the 'right' length of the split and the number of nested folders? Please note that although similar it isn't quite the same as Storing a million images in the filesystem. I'm looking for a way to help make the theories outlined more generic. Assumptions I have 'some' initial number of files. This number would be arbitrary but large. Say 500k to 10m+. I have considered the underlying physical hardware disk IO requirements that would be necessary to support such an endeavor. Put another way As time progresses this store will grow. I want to have the best balance of current performance and as my needs increase. Say I double or triple my storage. I need to be able to address both current needs and projected future growth. I need to both plan ahead and not sacrifice too much of current performance. What I've come up with I'm already thinking about using a hash split every so many characters to split things out across multiple directories and keeping the trees even, very similar as outlined in the comments in the question above. It also avoids duplicate files, which would be critical over time. I'm sure that the initial folder structure would be different based on what I've outlined, and depending on the initial scale. As far as I can figure there isn't a one size fits all solution here. It would be horrendously time intensive to work something out experimentally.

Read the article

How can I do a large file upload using Sinatra, haml, nginx, and passenger?

- by mmr

Hi all, I need to be able to allow a user to upload 30-60 mb files at a time. Right now, I'm solving the problem with a simple form post: %form{:action=>"/Upload",:method=>"post",:enctype=>"multipart/form-data"} - @theModelHash.each do |key,value| %br %input{:type=>"checkbox", :name=>"#{key}", :value=>1, :checked=>value} =key %br %input{:type=>"file",:name=>"file"} %input{:type=>"submit",:value=>"Upload"} This form allows the user to select processing options contained in theModelHash and upload a file for processing. Problem is, this method both freezes the user's UI and also requires that the entire form be reposted when the user presses the 'back' button. I've looked at SWFUpload, but have no idea how to integrate that into my relatively simple app. There's a page here about integrating it with Rails, but I'm using Sinatra, and am new enough to this whole web programming thing that I don't know how to modify those files to work with what I need to do. Is there a how-to to add large file uploads to my form there? Something relatively simple that just adds in a progress bar and doesn't repost? I feel like I'm having to triple the size of my application just to make this feature play nice, and that's bothering me a bit.

Read the article

Key ATG architecture principles

- by Glen Borkowski

Overview The purpose of this article is to describe some of the important foundational concepts of ATG. This is not intended to cover all areas of the ATG platform, just the most important subset - the ones that allow ATG to be extremely flexible, configurable, high performance, etc. For more information on these topics, please see the online product manuals. Modules The first concept is called the 'ATG Module'. Simply put, you can think of modules as the building blocks for ATG applications. The ATG development team builds the out of the box product using modules (these are the 'out of the box' modules). Then, when a customer is implementing their site, they build their own modules that sit 'on top' of the out of the box ATG modules. Modules can be very simple - containing minimal definition, and perhaps a small amount of configuration. Alternatively, a module can be rather complex - containing custom logic, database schema definitions, configuration, one or more web applications, etc. Modules generally will have dependencies on other modules (the modules beneath it). For example, the Commerce Reference Store module (CRS) requires the DCS (out of the box commerce) module. Modules have a ton of value because they provide a way to decouple a customers implementation from the out of the box ATG modules. This allows for a much easier job when it comes time to upgrade the ATG platform. Modules are also a very useful way to group functionality into a single package which can be leveraged across multiple ATG applications. One very important thing to understand about modules, or more accurately, ATG as a whole, is that when you start ATG, you tell it what module(s) you want to start. One of the first things ATG does is to look through all the modules you specified, and for each one, determine a list of modules that are also required to start (based on each modules dependencies). Once this final, ordered list is determined, ATG continues to boot up. One of the outputs from the ordered list of modules is that each module can contain it's own classes and configuration. During boot, the ordered list of modules drives the unified classpath and configpath. This is what determines which classes override others, and which configuration overrides other configuration. Think of it as a layered approach. The structure of a module is well defined. It simply looks like a folder in a filesystem that has certain other folders and files within it. Here is a list of items that can appear in a module: MyModule: META-INF - this is required, along with a file called MANIFEST.MF which describes certain properties of the module. One important property is what other modules this module depends on. config - this is typically present in most modules. It defines a tree structure (folders containing properties files, XML, etc) that maps to ATG components (these are described below). lib - this contains the classes (typically in jarred format) for any code defined in this module j2ee - this is where any web-apps would be stored. src - in case you want to include the source code for this module, it's standard practice to put it here sql - if your module requires any additions to the database schema, you should place that schema here Here's a screenshots of a module: Modules can also contain sub-modules. A dot-notation is used when referring to these sub-modules (i.e. MyModule.Versioned, where Versioned is a sub-module of MyModule). Finally, it is important to completely understand how modules work if you are going to be able to leverage them effectively. There are many different ways to design modules you want to create, some approaches are better than others, especially if you plan to share functionality between multiple different ATG applications. Components A component in ATG can be thought of as a single item that performs a certain set of related tasks. An example could be a ProductViews component - used to store information about what products the current customer has viewed. Components have properties (also called attributes). The ProductViews component could have properties like lastProductViewed (stores the ID of the last product viewed) or productViewList (stores the ID's of products viewed in order of their being viewed). The previous examples of component properties would typically also offer get and set methods used to retrieve and store the property values. Components typically will also offer other types of useful methods aside from get and set. In the ProductViewed component, we might want to offer a hasViewed method which will tell you if the customer has viewed a certain product or not. Components are organized in a tree like hierarchy called 'nucleus'. Nucleus is used to locate and instantiate ATG Components. So, when you create a new ATG component, it will be able to be found 'within' nucleus. Nucleus allows ATG components to reference one another - this is how components are strung together to perform meaningful work. It's also a mechanism to prevent redundant configuration - define it once and refer to it from everywhere. Here is a screenshot of a component in nucleus: Components can be extremely simple (i.e. a single property with a get method), or can be rather complex offering many properties and methods. To be an ATG component, a few things are required: a class - you can reference an existing out of the box class or you could write your own a properties file - this is used to define your component the above items must be located 'within' nucleus by placing them in the correct spot in your module's config folder Within the properties file, you will need to point to the class you want to use: $class=com.mycompany.myclass You may also want to define the scope of the class (request, session, or global): $scope=session In summary, ATG Components live in nucleus, generally have links to other components, and provide some meaningful type of work. You can configure components as well as extend their functionality by writing code. Repositories Repositories (a.k.a. Data Anywhere Architecture) is the mechanism that ATG uses to access data primarily stored in relational databases, but also LDAP or other backend systems. ATG applications are required to be very high performance, and data access is critical in that if not handled properly, it could create a bottleneck. ATG's repository functionality has been around for a long time - it's proven to be extremely scalable. Developers new to ATG need to understand how repositories work as this is a critical aspect of the ATG architecture. Repositories essentially map relational tables to objects in ATG, as well as handle caching. ATG defines many repositories out of the box (i.e. user profile, catalog, orders, etc), and this is comprised of both the underlying database schema along with the associated repository definition files (XML). It is fully expected that implementations will extend / change the out of the box repository definitions, so there is a prescribed approach to doing this. The first thing to be sure of is to encapsulate your repository definition additions / changes within your own module (as described above). The other important best practice is to never modify the out of the box schema - in other words, don't add columns to existing ATG tables, just create your own new tables. These will help ensure you can easily upgrade your application at a later date. xml-combination As mentioned earlier, when you start ATG, the order of the modules will determine the final configpath. Files within this configpath are 'layered' such that modules on top can override configuration of modules below it. This is the same concept for repository definition files. If you want to add a few properties to the out of the box user profile, you simply need to create an XML file containing only your additions, and place it in the correct location in your module. At boot time, your definition will be combined (hence the term xml-combination) with the lower, out of the box modules, with the result being a user profile that contains everything (out of the box, plus your additions). Aside from just adding properties, there are also ways to remove and change properties. types of properties Aside from the normal 'database backed' properties, there are a few other interesting types: transient properties - these are properties that are in memory, but not backed by any database column. These are useful for temporary storage. java-backed properties - by nature, these are transient, but in addition, when you access this property (by called the get method) instead of looking up a piece of data, it performs some logic and returns the results. 'Age' is a good example - if you're storing a birth date on the profile, but your business rules are defined in terms of someones age, you could create a simple java-backed property to look at the birth date and compare it to the current date, and return the persons age. derived properties - this is what allows for inheritance within the repository structure. You could define a property at the category level, and have the product inherit it's value as well as override it. This is useful for setting defaults, with the ability to override. caching There are a number of different caching modes which are useful at different times depending on the nature of the data being cached. For example, the simple cache mode is useful for things like user profiles. This is because the user profile will typically only be used on a single instance of ATG at one time. Simple cache mode is also useful for read-only types of data such as the product catalog. Locked cache mode is useful when you need to ensure that only one ATG instance writes to a particular item at a time - an example would be a customers order. There are many options in terms of configuring caching which are outside the scope of this article - please refer to the product manuals for more details. Other important concepts - out of scope for this article There are a whole host of concepts that are very important pieces to the ATG platform, but are out of scope for this article. Here's a brief description of some of them: formhandlers - these are ATG components that handle form submissions by users. pipelines - these are configurable chains of logic that are used for things like handling a request (request pipeline) or checking out an order. special kinds of repositories (versioned, files, secure, ...) - there are a couple different types of repositories that are used in various situations. See the manuals for more information. web development - JSP/ DSP tag library - ATG provides a traditional approach to developing web applications by providing a tag library called the DSP library. This library is used throughout your JSP pages to interact with all the ATG components. messaging - a message sub-system used as another way for components to interact. personalization - ability for business users to define a personalized user experience for customers. See the other blog posts related to personalization.

Read the article

Troubleshooting wireless client-bridged networks between two DD-WRT routers?

- by KronoS

I recently purchased a Buffalo N600 wireless router which came with DD-WRT pre-installed. I want to take my old wireless router a Linksys WRT54GL, also with DD-WRT pre-installed, and use it as a wireless bridge for my HTPC and Blu-Ray Player in the other room. I other words, I'm trying to connect to WIRED networks via the wireless on the routers. I followed eactly the instruction from DD-WRT's manual for 'Client Bridged' however I'm still not able to connect to two routers correctly, when the encryption is enabled (WPA2-Personal Mixed) however I am able to connect the two routers when there is NO encryption. I've checked, double checked, and triple checked that EVERYTHING is the same on BOTH routers: Routers 1 & 2 Encryption: WPA2-Personal Mixed Wireless Mode: G-Only Wireless Channel: 6 Subnet Mask: 255.255.255.0 Subnet: 192.168.1.0/254 SSID: Krono$ Primary Router #1 (Buffalo N600) IP Address: 192.168.1.1 Firewall: Enables w/ defaults DCHP: Enabled as DHCP Server Secondary Router #2 (Linksys WRT54GL) IP Address: 192.168.1.2 Firewall: Disabled as per DD-WRT instructions I'm looking for any configurations that I may have missed, or settings that may need to happen in order for this work.

Read the article

Disable "Do you want to change the color scheme to improve performance?" warning

- by William Lawn Stewart

Sometimes this dialog box will pop up (see screenshot below). Every time it appears I select "Keep the current color scheme, and don't show this message again". Windows then reminds me again -- either the next day or after reboot, or sometimes another 5 minutes later. Do you want to change the color scheme to improve performance? Windows has detected your computer's performance is slow. This could be because there are not enough resources to run the Windows Aero color scheme. To improve performance, try changing the color scheme to Windows 7 Basic. Any change you make will be in effect until the next time you log on to Windows Change the color scheme to Windows 7 Basic Keep the current color scheme, but ask me again if my computer continues to perform slowly Keep the current color scheme, and don't show this message again Is there some reason why Windows is ignoring/forgetting my attempts to suppress the dialog? I'd love to never ever see it again, it's annoying, and it alt-tabs me out of fullscreen applications. If it matters, I'm running Windows 7 x64 Professional. I believe the dialog appears because I'm forcing Vsync and Triple Buffering for DirectX applications.

Read the article

UPS power requirements for server

- by captainentropy

Greetings! So, I just placed an order for a new server. The company recommended that I get a 3000W UPS. (!) As best as I could I calculated the following wattage consumption based on benchmarked data or datasheets provided by the manufacturers of each component: number watts **total watts** MoBo 1 240 240 CPUs (E5540) 2 80 160 RAID cards (3ware) 2 18 36 RAM (6x4GB) 6 3 18 DVD drive 1 7 7 floppy 1 2 2 RE4 drives 8 7 56 WD20 drives 8 6 48 Intel X25 SSD 2 0.15 0.3 total = 567 So that is for the PSU requirements only. The PSUs in the machine are a 720W for the master node and 800W each for two subsystems. That's a total of 2320W that can be delivered by these PSUs. But that is 4X the amount being consumed, at most, by the components. I didn't count case fans or the eSATA card (3W maybe?) or what the PSUs themselves require but assuming I double or triple my calculations I'm not even remotely close to the 3000W UPS I was suggested to get. They run at least $1100. I could get a 2000W for about $750 or a 1500W for $450 and still be well over my estimated power need. I don't think I need a whole lot of run time in the case of a power outage, maybe 20 minutes max, enough time to shutdown if the power doesn't come on within 5-10 minutes. Any thoughts? Am I off on my calculations? Did I overlook something major? If so what are your suggestions for a UPS? Thanks!

Read the article

Windows Server 2012 Hyper-V very slow

- by Matt Taylor

I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

Read the article

which virtualization technology is right for me?

- by Chris

I need a little help with this getting this sorted out. I want to setup a linux virtual server that I can use to run both sever and desktop systems. I want a linux system that is minimalist in nature as all the main os will be doing is acting as a hypervisor. The system I'm trying to setup will be running a file server, windows 7, ubuntu 10.04, windows xp and a firewall/gateway security system. All the client OS'es accessing and storing files on the file server. Also all network traffic will be routed through the gateway guest os. The file sever will need direct disk access while the other guests can run one disk images. All of this will be running on the same computer so I wont be romoting in to access the guests OS'es. Also if possible I would like to be able to use my triple head setup in the guest OS'es. I've looked at Xen, kvm and virtualbox but I don't know which is the best for me. I'm really debating between kvm and virtual box as kvm seem to support direct hardware access.

Read the article

Openvpn - stuck on Connecting

- by user224277

I've got a problem with openvpn server... every time when I trying to connect to the VPN , I am getting a window with login and password box, so I typed my login and password (login = Common Name (user1) and password is from a challenge password from the client certificate. Logs : Jun 7 17:03:05 test ovpn-openvpn[5618]: Authenticate/Decrypt packet error: packet HMAC authentication failed Jun 7 17:03:05 test ovpn-openvpn[5618]: TLS Error: incoming packet authentication failed from [AF_INET]80.**.**.***:54179 Client.ovpn : client #dev tap dev tun #proto tcp proto udp remote [Server IP] 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert user1.crt key user1.key <tls-auth> -----BEGIN OpenVPN Static key V1----- d1e0... -----END OpenVPN Static key V1----- </tls-auth> ns-cert-type server cipher AES-256-CBC comp-lzo yes verb 0 mute 20 My openvpn.conf : port 1194 #proto tcp proto udp #dev tap dev tun #dev-node MyTap ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/VPN.crt key /etc/openvpn/keys/VPN.key dh /etc/openvpn/keys/dh2048.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt #push „route 192.168.5.0 255.255.255.0? #push „route 192.168.10.0 255.255.255.0? keepalive 10 120 tls-auth /etc/openvpn/keys/ta.key 0 #cipher BF-CBC # Blowfish #cipher AES-128-CBC # AES #cipher DES-EDE3-CBC # Triple-DES comp-lzo #max-clients 100 #user nobody #group nogroup persist-key persist-tun status openvpn-status.log #log openvpn.log #log-append openvpn.log verb 3 sysctl : net.ipv4.ip_forward=1

Read the article

Can't remote into Virtual PC

- by Spamela

I used to be able to remote into my Virtual PCs. It has been working for at least a year. Yesterday just stopped working... I cannot figure it out... Things I have triple-checked: 1. My Virtual PCs have "Allow Remote Access" checked. 2. My Virtual PCs have an account in the Administrator group that is password protected. 3. My Host's entry in the registry for the Terminal Services Port is still the default of 3389. So here is the strange thing. I can't even remote into the Virtual PC from it's host much less another PC... From the host, I can ping the Virtual PC and get a response but when trying to remote into it from the host I get the following error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote access to the server is not enabled. 2)The remote computer is turned off 3)The remote computer is not available on the network My host is running Windows 7. Virtual PCs are running XP. Thank you for looking at this!

Read the article

F2 in Paste mode

- by dotancohen

Vim has a terrific paste mode, in which abbreviations and mappings are ignored. Frustratingly, even keys that do not map to pastable ASCII characters, such as the function keys, are pasted literally. For instance the key F2 is pasted as <F2>. Is there anyway around this? Note that pastetoggle can in fact be mapped to a function key to easily leave paste mode, however the function that I am writing changes other values when entering or leaving paste mode (such as enabling or disabling line numbers and other things). Therefore I would really like to find a workaround. For reference, here is the current version of the function (that gets stuck in paste mode): iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> " Triple-toggle Insert Modes: coding, prose, and paste let g:insertModeGlobal=1 function! Te() if g:insertModeGlobal==3 " Was in paste insert mode, go to coding insert mode set nu set nopaste let g:insertModeGlobal=4 endif if g:insertModeGlobal==2 " Was in prose insert mode, go to paste insert mode set nolinebreak nnoremap j j nnoremap k k nnoremap gj gj nnoremap gk gk set relativenumber execute ":Signs" iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> set nonu set paste let g:insertModeGlobal=3 endif if g:insertModeGlobal==1 " Was in coding insert mode, go to prose insert mode set linebreak nnoremap j gj nnoremap k gk nnoremap gj j nnoremap gk k set number execute ":DisableSigns" iab if if let g:insertModeGlobal=2 endif if g:insertModeGlobal==4 let g:insertModeGlobal=1 endif endfunction

Read the article

750Gig Hard Drive shows full with only 315Gigs used

- by Chris Kelly

I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

Read the article

Can you see something wrong in my .htaccess?

- by AlexV

OK, after many search, trial and errors I've managed to create an .htaccess that do what I wanted (see explanations and questions after the code block): <IfModule mod_rewrite.c> RewriteEngine On #1 If the requested file is not url-mapper.php (to avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!url-mapper\.php)$ #2 If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #3 If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/seo-urls\/(excluded1|excluded2)(/.*)?$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/url-mapper.php?uri=%{REQUEST_URI} [L,QSA] </IfModule> This is what the .htaccess should do: #1 is checking that the file requested is not url-mapper.php (to avoid infinite redirect loops). This file will always be at the root of the domain. #2 the .htaccess must only catch URLs that don't end with an extension (www.foo.com -- catch | www.foo.com/catch-me -- catch | www.foo.com/dont-catch.me -- don't catch) and URLs ending with .php* files (.php, .php4, .php5, .php123...). #3 some directories (and childs) can be excluded from the .htaccess (in this case /seo-urls/excluded1 and /seo-urls/excluded2). Finally the .htaccess feed the mapper with an hidden GET parameter named uri containing the requested uri. Even if I tested and everything works, I want to know if what I do is correct (and if it's the "best" way to do it). I've learned a lot with this "project" but I still consider myself a beginner at .htaccess and regular expressions so I want to triple check it there before putting it in production...

Read the article

VOIP and internet connection speeds [cable vs. fiber]

- by microchasm

Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

Read the article

HPET missing from available clocksources on CentOS

- by squareone

I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

Read the article

MySQL : table organisation for very large sets with high update frequency

- by Remiz

I'm facing a dilemma in the choice of my MySQL schema application. So before I start here is a picture extremely simplified of my database : Schema here : http://i43.tinypic.com/2wp5lxz.png In one sentence : for each customer, the application harvest text data and attached tags to each data collected. As approximation of the usage of each table, here is what I expect : customer : ~5000, shouldn't grow fast data : 5 millions per customer, could double or triple for big customers. tag : ~1000, quite fixed size data_tag : hundred of millions per customer easily. Each data can be tagged a lot. The harvesting process is permanent, that means that around every 15 minutes new data come and are tagged, that require a very constant index refreshing. A lot of my queries are a SELECT COUNT of DATA between specific DATES and tagged with a specific TAG on a specific CUSTOMER (very rarely it will involve several customers). Here is the situation, you can imagine with this kind of volume of data I'm facing a challenge in term of data organization and indexing. Again, it's a very minimalistic and simplified version of my structure. My question is, is it better: to stick with this model and to manage crazy index optimization ? (which involves potentially having billions of rows in the data_tag table) change the schema and use one data table and one data_tag table per customer ? (which involves having 5000 tables on my database) I'm running all of this on a MySQL 5.0 dedicated server (quad-core, 8Go of ram) replicated. I only use InnoDB, I also have another server that run Sphinx. So knowing all of this, I can't wait to hear your opinion about this. Thanks.

Read the article

can't change wallpaper real time regedit commands

- by itagomo

i'm a first time 'SuperUser' poster .. what i want is to programatically change Desktop Wallpaper every few hours .. i'm using a batch file (.bat) and don't want to use other languages or programs, just the pre-installed stuffs with Windows XP .. i've already made my script that will modify values in the Registry reg add "HKCU\Control Panel\Desktop" /v Wallpaper /d "C:\Pictures\picture1.jpg" but it's not taking effect real time even with this command: RUNDLL32.EXE USER32.DLL,UpdatePerUserSystemParameters ,1 ,True need to reboot first to take effect. if i'm going to use Display Properties, it'll show at once. what i've noticed is that changes will take effect real time if it's a .bmp file and not for .jpg images. Second option is to convert JPG to 24-bit BMP files (to look exactly the same, but will triple the file size), but i'm hoping a better way .. i've already googled things but no avail.. i hope you (the helpful reader) can post any .bat or even vbs script to change Desktop Wallpaper instantly with JPG pictures .. hoping there's an answer without installing other apps or scripts ..

Read the article

Can you see something wrong in my working .htaccess?

- by AlexV

OK, after many search, trial and errors I've managed to create an .htaccess that do what I wanted (see explanations and questions after the code block): <IfModule mod_rewrite.c> RewriteEngine On #1 If the requested file is not url-mapper.php (to avoid .htaccess loop) RewriteCond %{REQUEST_FILENAME} (?<!url-mapper\.php)$ #2 If the requested URI does not end with an extension OR if the URI ends with .php* RewriteCond %{REQUEST_URI} !\.(.*) [OR] RewriteCond %{REQUEST_URI} \.php.*$ [NC] #3 If the requested URI is not in an excluded location RewriteCond %{REQUEST_URI} !^/seo-urls\/(excluded1|excluded2)(/.*)?$ #Then serve the URI via the mapper RewriteRule .* /seo-urls/url-mapper.php?uri=%{REQUEST_URI} [L,QSA] </IfModule> This is what the .htaccess should do: #1 is checking that the file requested is not url-mapper.php (to avoid infinite redirect loops). This file will always be at the root of the domain. #2 the .htaccess must only catch URLs that don't end with an extension (www.foo.com -- catch | www.foo.com/catch-me -- catch | www.foo.com/dont-catch.me -- don't catch) and URLs ending with .php* files (.php, .php4, .php5, .php123...). #3 some directories (and childs) can be excluded from the .htaccess (in this case /seo-urls/excluded1 and /seo-urls/excluded2). Finally the .htaccess feed the mapper with an hidden GET parameter named uri containing the requested uri. Even if I tested and everything works, I want to know if what I do is correct (and if it's the "best" way to do it). I've learned a lot with this "project" but I still consider myself a beginner at .htaccess and regular expressions so I want to triple check it there before putting it in production...

Read the article

FreeBSD performance tuning. Sysctls, loader.conf, kernel

- by SaveTheRbtz

I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

Read the article

LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

- by Andy Shinn

I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

Read the article

Add Your Gmail Account to Outlook 2010 Using IMAP

- by Mysticgeek

If you’re upgrading from Outlook 2003 to 2010, you might want to use IMAP with your Gmail account to synchronize mail across multiple machines. Using our guide, you will be able to start using it in no time. Enable IMAP in Gmail First log into your Gmail account and open the Settings panel. Click on the Forwarding and POP/IMAP tab and verify IMAP is enabled and save changes. Next open Outlook 2010, click on the File tab to access the Backstage view. Click on Account Settings and Add and remove accounts or change existing connection settings. In the Account Settings window click on the New button. Enter in your name, email address, and password twice then click Next. Outlook will configure the email server settings, the amount of time it takes will vary. Provided everything goes correctly, the configuration will be successful and you can begin using your account. Manually Configure IMAP Settings If the above instructions don’t work, then we’ll need to manually configure the settings. Again, go into Auto Account Setup and select Manually configure server settings or additional server types and click Next. Select Internet E-mail – Connect to POP or IMAP server to send and receive e-mail messages. Now we need to manually enter in our settings similar to the following. Under the Server Information section verify the following. Account Type: IMAP Incoming mail server: imap.gmail.com Outgoing mail server (SMTP): smtp.gmail.com Note: If you have a Google Apps account make sure to put the full email address ([email protected]) in the Your Name and User Name fields. Note: If you live outside of the US you might need to use imap.googlemail.com and smtp.googlemail.com Next, we need to click on the More Settings button… In the Internet E-mail Settings screen that pops up, click on the Outgoing Server tab, and check the box next to My outgoing server (SMTP) requires authentication. Also select the radio button next to Use same settings as my incoming mail server. In the same window click on the Advanced tab and verify the following. Incoming server: 993 Incoming server encrypted connection: SSL Outgoing server encrypted connection TLS Outgoing server: 587 Note: You will need to change the Outgoing server encrypted connection first, otherwise it will default back to port 25. Also, if TLS doesn’t work, we were able to successfully use Auto. Click OK when finished. Now we want to test the settings, before continuing on…it’s just easier that way incase something was entered incorrectly. To make sure the settings are tested, check the box Test Account Settings by clicking the Next button. If you’ve entered everything in correctly, both tasks will be completed successfully and you can close out of the window. and begin using your account via Outlook 2010. You’ll get a final congratulations message you can close out of… And begin using your account via Outlook 2010. Conclusion Using IMAP allows you to synchronize email across multiple machines and devices. The IMAP feature in Gmail is free to use, and this should get you started using it with Outlook 2010. If you’re still using 2007 or just upgraded to it, check out our guide on how to use Gmail IMAP in Outlook 2007. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailForce Outlook 2007 to Download Complete IMAP ItemsUse Gmail IMAP in Microsoft Outlook 2007Prevent Outlook with Gmail IMAP from Showing Duplicate Tasks in the To-Do BarSetting up Gmail IMAP Support for Windows Vista Mail TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp

Read the article

Set the Windows Explorer Startup Folder in Windows 7

- by Mysticgeek

When you open Windows Explorer from the Taskbar in Windows 7, it defaults to the Libraries view. Today we take a look at changing the target path to allow you to customize which location opens by default. When you click on the Windows Explorer icon on the Windows 7 Taskbar, it’s set to open to the Libraries view by default. You might not use the Libraries feature, or want to set it to a different location that is more commonly used. Set Windows Explorer Startup Location To change the default startup location for the Windows Explorer Taskbar icon, if you have no Explorer screens open, hold down the Shift key, right-click the Explorer icon, and select Properties. Or if you have Windows open, right-click on the Explorer icon to bring up the Jumplist, then right-click on Windows Explorer and select Properties. Windows Explorer Properties opens up and you’ll want to click on the Shortcut tab so we can change the Target. A common place you might want it to default to is your Documents folder. So to do that we need to enter the following into the Target field. %SystemRoot%\explorer.exe /n,::{450D8FBA-AD25-11D0-98A8-0800361B1103} Now when you open Windows Explorer from the Taskbar it defaults to My Documents… If you use the Start Menu to access Windows Explorer, open the Start Menu and go to All Programs \ Accessories and right-click on Windows Explorer then select Properties. Change the target path to where you want it to go. In this example we want Windows Explorer to open up to My Computer so we entered the following in the Target field. %SystemRoot%\explorer.exe /E,::{20D04FE0-3AEA-1069-A2D8-08002B30309D} When click on the Explorer icon in the Start Menu it defaults to My Computer… You can set it to open to various locations. For instance if you wanted to mess with someone at work, you could enter the following and Explorer will always open to the Recycle Bin. %SystemRoot%\explorer.exe /E,::{645FF040-5081-101B-9F08-00AA002F954E} Conclusion Here we showed you a couple of commonly used locations that you might want Windows Explorer to open to instead of Libraries. You can set it to other locations if you know the GUID (Globally Unique Identifiers) for the object or location you want it to default to. For more on using GUIDs check out The Geek’s article on how to enable the secret “How-To Geek” mode in Windows 7. Actually it’s just a play on the so-called “God Mode” for Windows, but there is some good information, and a list of some locations you might want to have Windows Explorer open to. Similar Articles Productive Geek Tips Make Explorer Show Window Titles in Windows VistaDisable Explorer Breadcrumbs in Windows VistaStill Useful in Vista: Startup Control PanelStop an Application from Running at Startup in Windows VistaHotkey for Creating New Folder in Windows Explorer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips

Read the article

Raspberry Pi entrance signed backed by Umbraco - Part 1

- by Chris Houston

Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

Read the article

Installer Reboots at "Detecting hardware" (disks and other hardware) on all recent Server Installs

- by Ryan Rosario

I have a very frustrating problem with my PC. I cannot install any recent version of Ubuntu Server (or even Desktop) since 9.04 even using the text-based installer. I boot from a USB stick created by Unetbootin (I also tried other methods such as startup disk creator with no difference). On the Server installer, it gets to "Detecting Hardware" (the second one about disks and all other hardware, not network hardware) and then either hangs at 0% (waited 24 hours), or reboots after a minute or two. My system (late 2007): ASUS P5NSLI motherboard Intel Core 2 Duo E6600 2.4Ghz 2 x 1GB Corsair 667MHz RAM nVidia GeForce 6600 I have unplugged everything (including the only hard disk, CD-ROMs and floppy). I have only one stick of RAM (tried each one to no avail) and am booting the installer from a USB stick (booting from CD-ROM yields the same problem). I also tried several of the boot options (nomodeset, nousb, acpi=off, noapic, i915.modeset=1/0, xforcevesa) in all combinations) to no avail. The only active parts of my system are the video card, mouse, keyboard and USB stick. I have also updated the BIOS to the most recent version. (FWIW, on the Desktop installer, I get a black screen after hitting the Install option.) Even after removing "quiet" I am unable to see what kernel panic is occurring (or not occurring) to cause the install to crash. I am only able to save the debug logs via a simple webserver in the installer. After the last line (I repeatedly refreshed), the server stops responding and the installer hangs or reboots: Jan 2 01:04:03 main-menu[302]: INFO: Menu item 'disk-detect' selected Jan 2 01:04:04 kernel: [ 309.154372] sata_nv 0000:00:0e.0: version 3.5 Jan 2 01:04:04 kernel: [ 309.154409] sata_nv 0000:00:0e.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.154531] sata_nv 0000:00:0e.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.164442] scsi0 : sata_nv Jan 2 01:04:04 kernel: [ 309.167610] scsi1 : sata_nv Jan 2 01:04:04 kernel: [ 309.167762] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10 Jan 2 01:04:04 kernel: [ 309.167774] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10 Jan 2 01:04:04 kernel: [ 309.167948] sata_nv 0000:00:0f.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.168071] sata_nv 0000:00:0f.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.171931] scsi2 : sata_nv Jan 2 01:04:04 kernel: [ 309.173793] scsi3 : sata_nv Jan 2 01:04:04 kernel: [ 309.173943] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 11 Jan 2 01:04:04 kernel: [ 309.173954] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 11 Jan 2 01:04:04 kernel: [ 309.174061] pata_amd 0000:00:0d.0: version 0.4.1 Jan 2 01:04:04 kernel: [ 309.174160] pata_amd 0000:00:0d.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.177045] scsi4 : pata_amd Jan 2 01:04:04 kernel: [ 309.178628] scsi5 : pata_amd Jan 2 01:04:04 kernel: [ 309.178801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jan 2 01:04:04 kernel: [ 309.178811] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 2 01:04:04 kernel: [ 309.485062] ata3: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:04 kernel: [ 309.633094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 2 01:04:04 kernel: [ 309.641647] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 Jan 2 01:04:04 kernel: [ 309.641658] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) Jan 2 01:04:04 kernel: [ 309.657614] ata1.00: configured for UDMA/133 Jan 2 01:04:04 kernel: [ 309.657969] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Jan 2 01:04:04 kernel: [ 309.658482] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 2 01:04:04 kernel: [ 309.658588] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 2 01:04:04 kernel: [ 309.658812] sd 0:0:0:0: [sda] Write Protect is off Jan 2 01:04:04 kernel: [ 309.658823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 2 01:04:04 kernel: [ 309.658918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 2 01:04:04 kernel: [ 309.675630] sda: sda1 sda2 Jan 2 01:04:04 kernel: [ 309.676440] sd 0:0:0:0: [sda] Attached SCSI disk Jan 2 01:04:05 kernel: [ 309.969102] ata2: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:05 kernel: [ 310.281137] ata4: SATA link down (SStatus 0 SControl 300) Anybody have any additional ideas I could try? I am getting ready to just toss the motherboard.

Read the article

How to Browse Without a Trace with an Ubuntu Live CD

- by Trevor Bekolay

No matter how diligently you clear your cache and erase your history, web browsing leaves traces on your computer. If you need keep your browsing private, then an Ubuntu Live CD is the answer. The key to this trick is that the Live CD environment runs completely in RAM, so things like your cache, cookies, and history don’t get saved to a persistent storage location. On a hard drive, even deleted files can be recovered, but once a computer is turned off the data stored in RAM is unrecoverable. In addition, since the Ubuntu Live CD environment is the same no matter what computer you use it on, there’s very little identifying information that a website can use to track you! The first step is to either burn an Ubuntu Live CD, or prepare a non-persistent Ubuntu USB flash drive. Ubuntu treats non-persistent flash drives like CDs, so files will not be written to it, but if you’re paranoid, then using a physical CD ensures that nothing gets written to a storage device. Boot up from the CD or flash drive, and choose to Run Ubuntu from the CD or flash drive if prompted (for more detailed instructions on booting from a CD or USB drive, see this article, or our guide on booting from a flash drive even if your BIOS won’t let you). Once the graphical Ubuntu environment comes up, you can click on the Firefox icon at the top of the screen to start browsing. If your browsing requires Flash, then you can install it by clicking on System at the top-left of the screen, then Administration > Synaptic Package Manager. Click on Settings at the top of the Synaptic window, and then select Repositories. Add a check in the checkbox with the label ending in “multiverse”. Click Close. Click the Reload button in the main Synaptic window. The list of available packages will reload. When they’ve reloaded, type “restricted” in the Quick search box. Right-click on ubuntu-restricted-extras and select Mark for Installation. It will note a number of other packages that will be installed. This list includes audio and video codecs, so after installing these, you should be able to play downloaded movies and songs. Click Mark to accept the installation of these other packages. Once you return to the main Synaptic window, click the Apply button and go through the dialogs to finish the installation of Flash and the other useful packages. If you open up Firefox now, you’ll have no problems using websites that use Flash. When you’re done browsing and shut down or restart your computer, all traces of your web browsing will be gone. It’s a bit of work compared to just using a privacy-centric browser, but if it’s very important that your browsing leave no traces on your hard drive, an Ubuntu Live CD is your best bet. Download Ubuntu Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDAdding extra Repositories on UbuntuHow to Add a Program to the Ubuntu Startup List (After Login)How to install Spotify in Ubuntu 9.10 using WineInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

Search Results

Search found 8755 results on 351 pages for 'triple boot'.

Page 212/351 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219 | Next Page >

- by Tim Brigham

- by mmr

- by Glen Borkowski

- by KronoS

- by William Lawn Stewart

- by captainentropy

- by Matt Taylor

- by Chris

- by user224277

- by Spamela

- by dotancohen

- by Chris Kelly

- by AlexV

- by microchasm

- by squareone

- by Remiz

- by itagomo

- by AlexV

- by SaveTheRbtz

- by Andy Shinn

- by Mysticgeek

- by Mysticgeek

- by Chris Houston

- by Ryan Rosario

- by Trevor Bekolay

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219 | Next Page >