Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 212/357 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• Mouse takes a while to start working after boot

  - by warkior

  I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

  Read the article

• Can't get LWJGL lighting to work

  - by Zarkonnen

  I'm trying to enable lighting in lwjgl according to the method described by NeHe and this post. However, no matter what I try, all faces of my shapes always receive the same amount of light, or, in the case of a spinning shape, the amount of lighting seems to oscillate. All faces are lit up by the same amount, which changes as the pyramid rotates. Concrete example (apologies for the length): Note how all panels are always the same brightness, but the brightness varies with the pyramid's rotation. This is using lwjgl 2.8.3 on Mac OS X. package com; import com.zarkonnen.lwjgltest.Main; import org.lwjgl.opengl.Display; import org.lwjgl.opengl.DisplayMode; import org.lwjgl.opengl.GL11; import org.newdawn.slick.opengl.Texture; import org.newdawn.slick.opengl.TextureLoader; import org.lwjgl.util.glu.*; import org.lwjgl.input.Keyboard; import java.nio.FloatBuffer; import java.nio.ByteBuffer; import java.nio.ByteOrder; /** * * @author penguin */ public class main { public static void main(String[] args) { try { Display.setDisplayMode(new DisplayMode(800, 600)); Display.setTitle("3D Pyramid"); Display.create(); } catch (Exception e) { } initGL(); float rtri = 0.0f; Texture texture = null; try { texture = TextureLoader.getTexture("png", Main.class.getResourceAsStream("tex.png")); } catch (Exception ex) { ex.printStackTrace(); } while (!Display.isCloseRequested()) { // Draw a Triangle :D GL11.glClear(GL11.GL_COLOR_BUFFER_BIT | GL11.GL_DEPTH_BUFFER_BIT); GL11.glLoadIdentity(); GL11.glTranslatef(0.0f, 0.0f, -10.0f); GL11.glRotatef(rtri, 0.0f, 1.0f, 0.0f); texture.bind(); GL11.glBegin(GL11.GL_TRIANGLES); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glEnd(); GL11.glBegin(GL11.GL_QUADS); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glEnd(); Display.update(); rtri += 0.05f; // Exit-Key = ESC boolean exitPressed = Keyboard.isKeyDown(Keyboard.KEY_ESCAPE); if (exitPressed) { System.out.println("Escape was pressed!"); Display.destroy(); } } Display.destroy(); } private static void initGL() { GL11.glEnable(GL11.GL_LIGHTING); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); GLU.gluPerspective(45.0f, ((float) 800) / ((float) 600), 0.1f, 100.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glLoadIdentity(); GL11.glEnable(GL11.GL_TEXTURE_2D); GL11.glShadeModel(GL11.GL_SMOOTH); GL11.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GL11.glClearDepth(1.0f); GL11.glEnable(GL11.GL_DEPTH_TEST); GL11.glDepthFunc(GL11.GL_LEQUAL); GL11.glHint(GL11.GL_PERSPECTIVE_CORRECTION_HINT, GL11.GL_NICEST); float lightAmbient[] = {0.5f, 0.5f, 0.5f, 1.0f}; // Ambient Light Values float lightDiffuse[] = {1.0f, 1.0f, 1.0f, 1.0f}; // Diffuse Light Values float lightPosition[] = {0.0f, 0.0f, 2.0f, 1.0f}; // Light Position ByteBuffer temp = ByteBuffer.allocateDirect(16); temp.order(ByteOrder.nativeOrder()); GL11.glLight(GL11.GL_LIGHT1, GL11.GL_AMBIENT, (FloatBuffer) temp.asFloatBuffer().put(lightAmbient).flip()); // Setup The Ambient Light GL11.glLight(GL11.GL_LIGHT1, GL11.GL_DIFFUSE, (FloatBuffer) temp.asFloatBuffer().put(lightDiffuse).flip()); // Setup The Diffuse Light GL11.glLight(GL11.GL_LIGHT1, GL11.GL_POSITION, (FloatBuffer) temp.asFloatBuffer().put(lightPosition).flip()); // Position The Light GL11.glEnable(GL11.GL_LIGHT1); // Enable Light One } }

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• DD-WRT RIP2 Router mode configuration

  - by Eduardo

  Can anybody tell me why my wireless router only redirects traffic to ADSL modem when it is on Gateway mode? These are the configurations when it is on RIP2 Router mode: ADSL Modem: ------------ LAN IP: 10.1.1.1 Subnet mask: 255.0.0.0 RIP v2 enabled in both directions Route: destination: 192.168.1.0 Subnet mask: 255.255.255.0 Gateway: 10.1.1.2 Wireless Router (DD-WRT) ------------------------ WAN IP: 10.1.1.2 WAN Subnet mask: 255.0.0.0 LAN IP: 192.168.1.1 LAN Subnet mask: 255.255.255.0 Operating mode: RIP2 Router Static Route: Destination LAN NET: 10.0.0.0 Subnet Mask: 255.0.0.0 Gateway: 10.1.1.1 Interface: LAN & WLAN

  Read the article

• Example of UITextField ResignFirstResponder with Monotouch

  - by kentakhy

  I'm a newbie. I can't figure out how and where to call ResignFirstResponder to get rid of the keyboard when the user finished entering the text in an UITextField. I'm a bit confused by the UIResponder class. Mono documentation says: "To dismiss the keyboard, send the UIResponder.ResignFirstResponder message to the text field that is currently the first responder." How to do so? Can someone post a simple working example? There are many examples in Obj-C but none in C#. Many thanks.

  Read the article

• How to get select's value in jqGrid when using <select> editoptions on a column

  - by destroyer of evil

  I have a couple of columns in jqGrid with edittype="select". How can I read the option value of the value currently selected in a particular row? e.g.: When I provide the following option, how do I get "FE" for FedEx, etc. editoption: { value: “FE:FedEx; IN:InTime; TN:TNT” } getRowData() for the rowId/cellname returns only the text/displayed component of the select. If I set a "change" data event on the column, the underlying fires change events only on mouse clicks, and not keyboard selects (there's numerous references to generic selects and mouse/keyboard issues). Bottomline, when a new value is selected, I need to know the option value at the time of the change, and also prior to posting to the server.

  Read the article

• Confluence or apache on win server 2008 cant find scripts and images :(

  - by Ishak

  I am a newbie to both Tomcat and Apache. I have set the virtual hosts as described in Here. And JIRA works fine when i browse the URL jira.agmlab.com. However when i try to access Confluence(3.4.5) with confluence.agmlab.com the pages come in plain html, i can login and browse pages but there is no css or js so that my confluence pages look very ugly. what can possibly cause this and how to fix this? here is my virtual hosts definitions : # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost * # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *> ServerName confluence.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/confluence/ ProxyPassReverse / http://localhost:8081/confluence/ # ProxyHTMLURLMap /confluence/ / <Location /> Order allow,deny Allow from all </Location> </VirtualHost> <VirtualHost *> ServerName jira.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> and i added 127.0.0.1 jira.agmlab.com 127.0.0.1 confluence.agmlab.com to my hosts file (i am using Win Server 2008 OS). here is part of the error log from Apache access.log file : 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/resources/confluence.web.resources:aui-forms/confluence-forms.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/js/batch.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/confluence.web.resources:login/confluence.web.resources:login.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/css/batch.css?media=print HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/styles/combined.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.2.2/_/download/batch/com.atlassian.confluence.plugins.doctheme:splitter/com.atlassian.confluence.plugins.doctheme:splitter.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/legacy.confluence.web.resources:prototype/legacy.confluence.web.resources:prototype.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/opensearch/osd.action HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:16:27 +0200] "POST /plugins/servlet/gadgets/security-tokens HTTP/1.1" 200 525 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 I can see the pages properly with js and css and images when i use confluence with URL localhost:8081/confluence. i have just set the base url of confluence to "confluence.agmlab.com" and then restarted both confluence and apache but nothing changed, and i also checked settings for jira, and its base URL is localhost:8080 but it works fine. Can it be something related with the permissions defined in Win Server 2008 ? maybe there is not enough rights (such as read execute ) in some users, directories ??

  Read the article

• ergonomics: what's better; trackball, ergonomic mouse or some other pointing device (a-la touchscree

  - by mauriciopastrana

  So I bit into the hype and recently purchased an apple wireless keyboard and that evil bar-of-soap thing apple makes for a mouse. Couple of hundred dollars later and this is where I begin to worry about RSI. Go figure. Don't get me wrong, this apple mouse is genius and looks pretty as hell, but my right wrist feels tired after a full day's worth of work, so i'm thinking of switching. Anyone out there use a trackball? is this worse? should I get a super-ergonomic mouse instead? I've seen mouse-trackball combos but am not sold, they still elicit the same end-finger behaviour detrimental for RSI, right? I also have a wrist-rest mousepad, but couldn't find one suitable for my keyboard. I've even considered having a small touchscreen where the mousepad should go, no mouse (or alternatively, a usb trackpad). Just looking for ideas, is the trackball better than the mouse? /mp

  Read the article

• Focus In An ItemsControl

  - by Andrew

  I have an ItemsControl that uses a DataTemplate. The DataTemplate contains a TextBox, which can receive keyboard focus. I need to be able to move the keyboard focus from the currently focused TextBox in the DataTemplate to the next TextBox, as if the Tab key has been pressed. I've noticed that there is a UIElement.MoveFocus() method, but this begs the question as to which UIElement should be used to call the method. This is probably the reason why I haven't gotten this method to work for me... Any help would be really appreciated! Thanks, Andrew

  Read the article

• Type attribute for text_field

  - by Koning Baard XIV

  I have this code: <%= f.text_field :email, :type => "email", :placeholder => "[email protected]" %> So people can enter their email on an iPhone with the email keyboard instead of the ASCII keyboard. However, the output is: <input id="user_email" name="user[email]" placeholder="[email protected]" size="30" type="text" /> which should be: <input id="user_email" name="user[email]" placeholder="[email protected]" size="30" type="email" /> Is there a way to force Rails to use the email type instead of text, or must I use HTML directly? Thanks

  Read the article

• Bring to front DatePicker on an UITextField

  - by crazyfr

  Hi, When an UITextField is firstResponder, I would like to bring to front an UIDatePicker (bottom part of the screen) without the "going down keyboard" (no call to UITextField resignFirstResponder). The aim is to process like UIKeyboard of UITextField which pop-up on nearly everything when it becomeFirstResponder. modalViewController seems to be fullscreen only. - showDatePicker:(id)sender { if([taskName isFirstResponder]) [taskName resignFirstResponder]; [self.view.window addSubview: self.pickerView]; // size up the picker view and compute the start/end frame origin (...) [UIView commitAnimations]; } This example is an animation of keyboard going down, and DatePicker going up, behind and not in front. Do you know a solution ? A piece of code would be welcome. Thanks in advance.

  Read the article

• How is the iPhone SMS compose view implemented?

  - by erotsppa

  Regarding the SMS compose view as show in the picture below: I have two questions: 1) How is the text entry box implemented? There are no standard control from the API and the box is smart enough to resize when you press enter OR when the text is too long. Also the bar resizes with it. How is this done with the least coding? 2) How to code it such that when the keyboard shows up the whole view shifts up? Typically when the keyboard shows, it goes over your current view.

  Read the article

• iphone monotouch BecomeFirstResponder in UISearchBar

  - by BahaiResearch.com

  In Monotouch when we call BecomeFirstResponder on a UISearchBar in the ViewWillAppear method, it does not cause the keyboard to appear.

  Read the article

• My python auto-login script is broken.

  - by user310392

  A long time ago, I wrote a little python script to automatically log me on to the wireless network at my office. Here is the code: #!/opt/local/bin/python from urllib2 import urlopen from ClientForm import ParseResponse try: if "Logged on as" in urlopen("https://MYWIRELESS.com/logon").read(): print "Already logged on." else: forms = ParseResponse(urlopen("https://MYWIRELESS.com/logon"), backwards_compat=False) form = forms[0] form["username"], form["password"] = "ME", "MYPASSWD" urlopen(form.click()) print "Logged on. (probably :-)"; except IOError, e: print "Couldn't connect to wireless login page:\n", e I changed computers recently, and it stopped working. Now, I get the error: File "login.txt", line 4, in <module> from ClientForm import ParseResponse ImportError: No module named ClientForm which makes it look like I don't have some package (ClientForm) installed, so I installed it (sudo port install py-clientform), but I still get the same error. Does anyone have an idea what I'm doing wrong?

  Read the article

• Calling SetWindowsHookEx inside VS2008 debugger always returns NULL

  - by SoMoS

  we're working on a .Net application that does a low level keyboard hook. When we call the SetWindowsHookEx running inside the debugger the call always fail. When running from the compiled executable everything works fine. If we attach to the processs the the SetWindowsHookEx has been called everything works too. I've read somewhere (I can not remember) that VS already does a low level keyboard hook but this shouldn't be a problem as there is the CallNextHook function. Someone knows what's happening? EDIT: The code is pretty straigfoward, the exception is thrown inside debugger but not outside. Public Sub New() m_callback = New NativeMethods.KeyboardHookDelegate(AddressOf KeyboardCallback) End Sub Public Sub Start() m_handle = NativeMethods.SetWindowsHookEx(NativeMethods.HookType.WH_KEYBOARD_LL, m_callback, Marshal.GetHINSTANCE(Reflection.Assembly.GetExecutingAssembly().GetModules()(0)).ToInt32, 0) If m_handle = 0 Then Throw New Exception() End If End Sub

  Read the article

• PHP CLI application debug in ZendStudio (STDIN)

  - by Yuriy

  0 I am trying to debug php CLI using Zend Studio. My problem: I can't get user input from keyboard. This is part of code (method in some class): public function getInput($promt = null, $defaultValue = null) { if(!isset($promt)){ $promt = self::$DEFAULT_PROMPT; } echo $promt; $stdin = fopen ( "php://stdin", "r" ); $val = fgets ( $stdin ); return $val; } So ZS walks through code quite ok, but it stops at $val=fgets() And I have no clue where am I supposed to enter something from keyboard. I tried in console, and everywhere, I chacked debug configuration (Allocate console = on) etc. HELP!

  Read the article

• IntelliSense has forgotten my code snippets!

  - by David

  Hi all I have a stack of code snippets imported into Visual Studio. Just recently, they have stopped displaying in Intellisense. If the keyboard shortcut doesn't bring up anything else on IntelliSense, then I can tab and the code snippet is inserted just fine. However, if the keyboard shortcut for the snippet happens to also bring up other items in IntelliSense, tabbing will select the first of those items, so I actually can't use the code snippet at all! Does anyone have any ideas why IntelliSense would be unable to list my code snippet shortcuts? I started using ReSharper recently, but that wouldn't be the problem surely?! Thanks for your help David

  Read the article

• iPhone UIWebView becomeFirstResponder

  - by user505618

  I have an UIWebView with an <input type="text"/> html element in it. I want to focus the input element in the html and show the keyboard on the iPhone programmatically, without tapping the screen. I've tried the following: set the focus from JavaScript (in this case the onFocus JS event will fire but the keyboard won't show up) [webView becomeFirstresponder] (returns NO) set the first subview of the webView to be the firstResponder (returns NO) subclass UIWebView to return YES to canBecomeFirstResponder: (nothing happens) I'm trying to find the solution since yesterday but I couldn't find it. Please help.

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• Windows - VBScript - Determine IP address of computer on network

  - by tward

  I have written some VBScripts to automate tasks that I perform on computers over the network. These work great for most tasks however within our network we have problems with the IP address in DNS being correct all the time. This mainly occurs with laptops where we have different IP ranges for machines on the wireless and wired network. For example a machine may boot up wired in the morning and get an IP address: 10.10.10.1 When it switches to wireless it will obtain an address in a different subnet: 10.11.10.1 When you try to connect to that machine it still returns the old IP address (10.10.10.1) even though the computer now has a new one. I have found that I can still connect to that computer's C$ share via \computer name\c$ even though the machine does not ping. Obviously there is some other kind of address resolution going on, my question is how do I harness this to allow my VBScripts connect to WMI? Thanks!

  Read the article

• forwarding a notification to another class

  - by Mike

  I am using this method - (void)keyboardWillShow:(NSNotification *)notification that is triggered when the keyboard shows. When this method is triggered, it receives a notification that contains several parameters about the keyboard, as the animation duration, animation curve and frame. I need to forward this notification and all its parameters to another class. So, I've tried to do this inside keyboardWillShow: [[NSNotificationCenter defaultCenter] postNotificationName:@"doSomething" object:notification userInfo:nil]; the doSomething notification runs doSomething method on another class, and it has this form: - (void) doSomething:(NSNotification *)notification { but when I try to read the notification values on this other class, using, for example, myRect = [[[notification userInfo] objectForKey:UIKeyboardFrameEndUserInfoKey] CGRectValue]; I obtain zero for all values. The notification is losing its parameters and not being forwarded. How can I do that? thanks.

  Read the article

• AS3 TextField - unwanted carriage return when setting value to ""

  - by jevinkones

  I have an input TextField and have a KeyboardEvent.KEY_DOWN even listener on the stage to listen for the Keyboard.ENTER event. The event listener adds the entered text to an array or whatever, and then clears the TextField. The problem is that when the Enter key event fires and the TextField value is set to "", it leaves a carriage return in the TextField and the cursor positioned on the second line. WTF? I've been coding AS2 and AS3 for a LONG time and have never ran into this before. Am I losing my mind? Please help, people! :-) Example: var myTextArray:Array = new Array(); stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyDown); function onKeyDown(e:KeyboardEvent):void{ if(e.keyCode == Keyboard.ENTER){ if(_inputText.text != null){ myTextArray.push(_inputText.text); } _inputText.text = ""; } }

  Read the article

• How to prevent Windows XP from stealing my input Ctrl-Space which is meant for Emacs

  - by Dean

  I am learning and using Emacs. What I found annoying is that Ctrl-Space input will be stolen by Windows XP to switch the language bar instead of setting the mark in Emacs. The "language bar" is the native input languages selection such as Chinese keyboard other than English keyboard. Is there a way to temporarily prevent XP from stealing it? I have disabled the language bar from "Regional and language options" from Control Panel but the problem still exists. It doesn't happen on my Windows 2000 desktop at office but it happens on my work Windows XP laptop. Thank you very much.

  Read the article

• AVD Screen orientation not changing with CTRL+F11 or CTRL+F12

  - by Brad Hein

  I run my app in the AVD emulator using eclipse but I'm unable to change the screen orientation in the AVD (Android 2.0 platform on the emulator). When I press CONTROL+F11 or CONTROL+F12 on the keyboard, nothing happens. No messages are generated in the adb debuglog/logcat either when I press either hotkey. According to http://developer.android.com/guide/developing/tools/emulator.html these are the correct hotkeys to switch the emulator's screen orientation. I tried it with my app, and with the messaging app. The hotkey has no affect in any case. I'm running Fedora 12, Gnome. I checked my Keyboard Shortcuts in the System - Preferences menu, nothing's attached to either hotkey. Same problem, 3 different PCs (all running Fedora Gnome).

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >