Search Results

Search found 7159 results on 287 pages for 'green hosting'.

Page 213/287 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • Tortoise SVN, find all non-added files?

    - by John Isaacks
    I am using Tortoise SVN on Windows. I have a deep directory structure (using cakephp). After creating several files I then went through and +added them. The new files show a ? next to them and a + next to them after set to add so it is easy to tell which files still need to be added. this is the same with folders. However if a new file is inside an old folder there will still be the green checkmark. You won't have any indicator telling you there is a new file. So I forgot to add one before a commit. This wouldn't be so bad as I could just add it and recommit. However, I also made this a tag, so I had recommit to the tag and the trunk. Anyways this wouldn't have been an issue if there was an indicator on existing folders that contain new files. Is there a way to set this up?

    Read the article

  • Windows 7 - All Icons Missing, Explorer Progress Bar Never Finishes, Libraries Gone

    - by Alex
    since yesterday i've had three issues which all arose at the same time. windows 7 x64, i7 2.8ghz 12gb ddr3 1 - my libraries, favorites, drives are missing...basically the entire sidebar is gone. http://i.imgur.com/m8pRQ.png. yet when i open a dialog, my libraries and drives are back to normal ONLY for the dialog. i tried Restore Default Libraries. it works one time, but when i open libraries again i go back to the empty mess. restarting the computer temporarily fixes the problem. 2 - in the explorer window that's showing libraries, when i navigate to a certain folder i get an unending progress bar (the kind that turns the address bar green). yesterday when the problem started, i was saving a file to this folder. the program writing the file crashed during the write and i believe that's what caused the problem. i have sugarsync backing up that folder and when i restarted the computer sugarsync informed me that its database was corrupted, so i had to uninstall and reinstall the software. 3 - icons are missing. the Rebuild Icon Cache did not fix this. http://i.imgur.com/r9pgo.png restarting the computer temporarily fixes these problems, but when i open the directory with the initial write problem, everything stops working. edit: i should note that i did a chkdsk /f and it repaired problems. i also did the thing that verifies then restores windows files (can't remember the command now), which reported that everything was normal.

    Read the article

  • Use autocomplete in dropdown cells with Excel 2007?

    - by Martin
    I want to make a survey with Excel and I therefore have defined the cells for the answers as a dropdown cell which only accepts answers from a certain list, e. g.: The two Lists List1 and List2 (yellow cells) are the possible answers for the questions in Block 1.x resp. 2.x (blue) . There might be a block 4 with more questions, which again use List1 for their possible answers. My problem is: I'd like to be able to use the autocompleate feature to fill in the blue cells with the dropdown menu, so that the user only types 5 and it automatically expands to "5: extremely important" or "5: extremely difficult". According to my research on the www, this should be possible if I add the list with possible answers directly above the cells where autocomplete should work (I did this with the green helper cells which could be hidden) . But I have to enter at least 4 characters 5: e to get the autocompleted suggestion. Is there a way to make autocomplete already replace a "5" by the corresponding valid term? As the survey file shall be distributed to a lot of people "outside", I can not use VBA magic because it may be blocked on their computer and might not work. EDIT: it seems to have to do with the numbers I use: If I'd start my List items with A, B, C instead of 1, 2, 3, it would work perfectly. Excel seems to ignore the pure numbers when they are entered and does not try to autocomplete them.. is there a workaround? (I hope it is clear what I want, it seems a little difficult to explain.)

    Read the article

  • SSD as primary or secondary drive on a small Linux server?

    - by Alex Martelli
    I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

    Read the article

  • Can we do a DNSSEC 101? [closed]

    - by PAStheLoD
    Please share your opinions, FAQs, HOWTOs, best practices (or links to the one you think is the best) and your fears and thoughts about the whole migration (or should I just call it a new piece of tech?). Is DNSSEC just for DNS providers (name server operators)? What ought John Doe to do, who hosts johndoe.com at some random provider (GoDaddy, DreamHost and such)? Also, what if the provider's name server doesn't do automatic signing magic, can John do it manually? In a fire-and-forget way, without touching KSKs and ZSKs rollovers and updating and headaches?) Does it bring any change regarding CERT records? Do browsers support it? How come it became so complex? Why didn't they just merged it with SSL? DKIM is pretty straightforward, IANA/IETF could've opted for something like that. (Yes I know that creating a trust anchor would be still problematic, but browsers are already full of CA certs. So, they could've just let anyone get a cert for a domain for shiny green padlocks, or just generate one for a poor blue lock, put it into a TXT record, encrypt the other records and let the parent zone sign the whole for you with its cert.) Thanks! And for disclosure (it seemed like the customary thing to do around here), I've asked the same on the netsec subreddit.

    Read the article

  • How to determine if my AWS/EC2 server has been compromised / resolution?

    - by ElHaix
    I have recently seen an increase in network in/out activity on my server and am trying to determine if my AWS/EC2 instance has been compromised, and if so, how to resolve? In my security group I have: Inbound: 80 (HTTP) 0.0.0.0/0 Outbound: 80 (HTTP) 0.0.0.0/0 443 (HTTPS) 0.0.0.0/0 Using TCP-UDP Endpoint Viewer: I see a lot of w3wp.exe TCP processes with varying local ports http and numbered, as well as varying remote ports. Some processes go red/yellow/green on updates . I see Remote address for most w3wp processes are my ec2 instance, however I am seeing several to *.deploy.akamaitechnologies.com and *.deploy.static.akamaitechnologies.com with received bytes varying between 4-11 megs. I also see Ec2Config.exe, remote address: 169.254.169.254 System Process Remote Address: fetcher4-4.p.mail.ru (how can I get rid of this one?!) local port: http remote port: 33432 I am also seeing some system processes from 114.216-244-93-rdns.wowrack.com: Protocol: TCP local port: http remote port: varying As well as some baiduspider "System Process"'s. I'm afraid that my system may have been compromised, and wondering if these results are any indication of that. If so, how can I get eliminate these possible threats? I have MS Security Essentials installed.

    Read the article

  • Western Digital My Book not recognized by WD software

    - by Kari
    A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

    Read the article

  • Need advice in setting up server. fastCGI, suExec, speed, security, etc.

    - by lewisqic
    I am running my own dedicated server with centOS 5 and WHM/cPanel. I would like to configure my server to meet my needs but I need a little help. It will only be my own websites being run on this server. I'm still a little green when it comes to server administration so please forgive my ignorance. What I Would Like to Have: I need some public directories to be writable (for user image uploads and things like that) but I don't want those directories to have 777 permissions. I need individual accounts to have the ability to set custom php settings for their own account without affecting other accounts, whether through a php.ini file or through .htaccess or any other method. I would like things to run as fast as possible, whether that means using a php optimizer or cacher, such as eaccelerator or xcache or anything else. I need things to be as secure as possible. Here Are My Questions What should I use for my php handler? DSO? CGI? fastCGI? suPHP? Other? Should I be using suEXEC? What are the benefits or downfalls of this? What php optimizer/cacher is best to use? Are there any other security tips I need to know about all of this? I'd appreciate any advice or direction that can be offered. Thanks!

    Read the article

  • Microphone doesn't work

    - by mandy
    I'm having a trouble with my built in microphone. Even if I use headphone with mic, it doesn't really work. The weird thing is, if I clap the green lines of the speaker icon jumps, but if I speak it doesn't. I have also tried some recordings, but I can not hear myself and adjusting the volume didn't help at all. I tried to restore it, still no change. I have updated it in the device manager, but it said there that it's up to date and the devices are working properly. Until I decided to recover the whole system (wherein I pressed zero and switch on button) to my surprise, the settings became different, most programs were deleted, even my files. It's like it was formatted and I'm so sad that the mic was not fixed. I really don't know what to do now. My laptop model is Toshiba satellite m840. I want to it return to its settings/set up just before I Recover the system and bring back all the programs that we're installed and of course, most of all, to fix my microphone so I can use Skype again and other video calling application.. I hope someone could help me. Thanks a lot!

    Read the article

  • Problem with connecting two different networks

    - by tanascius
    I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

    Read the article

  • java warnings on linux

    - by Geo Papas
    Hello i am getting warnings after i have installed java on kubuntu 11.10. The java programs run but i always get 4 warnings: $ java Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' What am i missing? Thanks in advance! Here is the file content /usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg : /usr/lib/jvm/java-6-sun # # %W% %E% # # Copyright (c) 2006, Oracle and/or its affiliates. All rights reserved. # ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms. # # List of JVMs that can be used as an option to java, javac, etc. # Order is important -- first in this list is the default JVM. # NOTE that this both this file and its format are UNSUPPORTED and # WILL GO AWAY in a future release. # # You may also select a JVM in an arbitrary location with the # "-XXaltjvm=<jvm_dir>" option, but that too is unsupported # and may not be available in a future release. # -server KNOWN -client IGNORE -hotspot ERROR -classic WARN -native ERROR -green ERROR

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • 20 1TB drives vs. 10 2TB drives in RAID5/6 server

    - by Hunter
    Hi everyone, I will be setting up a server at work and I need some advice on some details. The setup will be one blade-type server (8-core, 16GB RAM) with two subsystems - one for the main storage the other to back it up. I'm shooting for a 20TB array (I know it'll be less after formatting and parity drives). So is there any advantage one way or the other with either 20 1TB drives or 10 2TB drives? I'm not sure right now how many controllers I should have either (in the quote I have is a dual-port controller). I would think two controllers for a server of this size would be a better choice than the dual-port controller (but I really don't know). And would an array of this size have any performance issues in RAID 5 or 6 (I know RAID 5 or 6 are "slower" because of all the parity calculations). Also, these will be either WD RE3 (1TB) or the RE4 (2TB). Oh, also, for the backup array would it be ok to use the WD 2TB green drives (also in RAID5 or 6)?

    Read the article

  • How does voltage fluctuation affect a laptop

    - by user45535
    I own an Acer Aspire 3680. In the past 2 years, I have given, my laptop for service due to the same kind of problem. Last year at the same time, I gave my laptop to the service center. They repaired it and I managed to ask them this question: Why does this problem happen. How can I prevent it? They said, that due to voltage fluctuations, something has gone wrong in your laptop. They actually were hesistant in mentioning as to which part they changed/repaired. Now recently the same problem happened and again I gave it to a service center to get it repaired and they also said, this is caused due to voltage fluctuation. My Question is: Due to Voltage fluctuation which part of the laptop can get affected. How can I prevent this from happening. Laptop Symptoms before I gave to service: When I plug in the adapter for charging the Green Light blinks and the laptop doesn't turn on. Neither does the charging indicator indicates the light, while charging.

    Read the article

  • How to boost playback volume in real time on media recorded with a very low volume.

    - by L Marksman
    I have never heard a satisfactory answer to this often misunderstood question, let me explain. Lets say I have a sound card and earphones/speakers that can play back audio loud enough in most cases. This is great but the problem is that you always find people who do not know how to record audio, from Youtube video's to music. So now you end up with a audio playback that only uses 10% or less of the capacity of your sound hardware, in vista/win 7 you will see this frequently in the mixer with the volume pushed up to max but the green sound level only goes up a millimeter or two. I am looking for (preferably free) software or a method to boost the sound level of any audio from any source in real time to use more of my hardware capacity similar to what VLC media player can do. Oh and please, do not tell me it is impossible. I am not trying to boost the volume past what my hardware is capable of, I am just trying to use my hardware's full capacity. Also please do not tell met to buy new hardware, I know I can use hardware amplification, I don't want to (like many others) spend money on a simple little problem like this. Thanks!

    Read the article

  • CentOS: AJAX/jQuery not working

    - by Australiya
    In a nutshell, I have an unmanaged VPS. At one time, it had Ubuntu 10.10 server on it, then I reinstalled it with CentOS 6 and updated it to CentOS 6.2. Now, the problem is, the AJAX/jQuery shoutbox has ceased working (I assume it uses one of the two to inject itself into a div and then refresh when new messages are posted, I'm not sure, I didn't write these), and the plug-board script now shows me a lime green blank page. No changes to the source codes have been made, and they are in the location they expect themselves to be. I have Apache2, MySQL 5, PHP 5, and I did install the php-xml libraries. What am I missing? It's gotta be server side because the scripts themselves are fine, if I move them to a different server they work just fine. I'm not getting any errors related to this in the error_log file. Thanks in advance! Edit: If you want, you can look at the plugboard at kazeshini.net/plugboard and there's an installation of the chatbox at silverlotus.kazeshini.net/yshout/example, I know nothing about scripts and debugging so better someone else looks at it than someone that doesn't know what they're looking for.

    Read the article

  • Mysterious dbboon folder with proxy.php file on my godaddy account

    - by Paul
    When doing some web maintenance today, I noticed a strange new folder on my GoDaddy hosting account at the root level named "dbboon", with a single file inside, called proxy.php. It's code is listed below, and seems to be some sort of proxy function. I was kind of troubled because I didn't put it there. I googled all this to learn more, but didn't find anything, except for the proxy file happened to be also stored at pastebin.com: http://pastebin.com/PQsSPbCr I called GoDaddy and they confirmed that it belonged to them, said it was put there by their advanced hosting group for testing purposes but didn't have any more information. I thought this was all really weird: why would they put something in my folder without giving me a heads-up, and why would they need to do something like this? anybody know anything about this? <?php $version = '1.2'; if(isset($_GET['dbboon_version'])) { echo '{"version":"' . $version . '"}'; exit; } function dbboon_parseHeaders($subject) { global $version; $subject = trim($subject); $parsed = Array(); $len = strlen($subject); $position = $field = 0; $position = strpos($subject, "\r\n") + 2; while(isset($subject[$position])) { $nextC = strpos($subject, ':', $position); $fieldName = substr($subject, $position, ($nextC-$position)); $position += strlen($fieldName) + 1; $fieldValue = NULL; while(1) { $nextCrlf = strpos($subject, "\r\n", $position - 1); if(FALSE === $nextCrlf) { $t = substr($subject, $position); $position = $len; } else { $t = substr($subject, $position, $nextCrlf-$position); $position += strlen($t) + 2; } $fieldValue .= $t; if(!isset($subject[$position]) || (' ' != $subject[$position] && "\t" != $subject[$position])) { break; } } $parsed[strtolower($fieldName)] = trim($fieldValue); if($position > $len) { echo '{"result":false,"error":{"code":4,"message":"Communication error, unable to contact proxy service.","version":"' . $version . '"}}'; exit; } } return $parsed; } if(!function_exists('http_build_query')) { function http_build_query($data, $prefix = '', $sep = '', $key = '') { $ret = Array(); foreach((array) $data as $k => $v) { if(is_int($k) && NULL != $prefix) { $k = urlencode($prefix . $k); } if(!empty($key) || $key === 0) { $k = $key . '[' . urlencode($k) . ']'; } if(is_array($v) || is_object($v)) { array_push($ret, http_build_query($v, '', $sep, $k)); } else { array_push($ret, $k . '=' . urlencode($v)); } } if(empty($sep)) { $sep = '&'; } return implode($sep, $ret); } } $host = 'dbexternalsubscriber.secureserver.net'; $get = http_build_query($_GET); $post = http_build_query($_POST); $url = $get ? "?$get" : ''; $fp = fsockopen($host, 80, $errno, $errstr); if($fp) { $payload = "POST /embed/$url HTTP/1.1\r\n"; $payload .= "Host: $host\r\n"; $payload .= "Content-Length: " . strlen($post) . "\r\n"; $payload .= "Content-Type: application/x-www-form-urlencoded\r\n"; $payload .= "Connection: Close\r\n\r\n"; $payload .= $post; fwrite($fp, $payload); $httpCode = NULL; $response = NULL; $timeout = time() + 15; do { while($line = fgets($fp)) { $response .= $line; if(!trim($line)) { break; } } } while($timeout > time() && NULL === $response); $headers = dbboon_parseHeaders($response); if(isset($headers['transfer-encoding']) && 'chunked' === $headers['transfer-encoding']) { do { $cSize = $read = hexdec(trim(fgets($fp))); while($read > 0) { $buff = fread($fp, $read); $read -= strlen($buff); $response .= $buff; } $response .= fgets($fp); } while($cSize > 0); } else { preg_match('/Content-Length:\s([0-9]+)\r\n/msi', $response, $match); if(!isset($match[1])) { echo '{"result":false,"error":{"code":3,"message":"Communication error, unable to contact proxy service.","version":"' . $version . '"}}'; exit; } else { while($match[1] > 0) { $buff = fread($fp, $match[1]); $match[1] -= strlen($buff); $response .= $buff; } } } fclose($fp); if(!$pos = strpos($response, "\r\n\r\n")) { echo '{"result":false,"error":{"code":2,"message":"Communication error, unable to contact proxy service.","version":"' . $version . '"}}'; exit; } echo substr($response, $pos + 4); } else { echo '{"result":false,"error":{"code":1,"message":"Communication error, unable to contact proxy service.","version":"' . $version . '"}}'; exit; }

    Read the article

  • MSDTC attempts to enlist client machine in a distributed transaction

    - by Ken
    Hi there We're seeing the following intermittent warning logged by MSDTC: A caller has attempted to propagate a transaction to a remote system, but MSDTC network DTC access is currently disabled on machine 'X'. Please review the MS DTC configuration settings. However, MSDTC is disabled on machine X by design - it's a client machine, and has no business being enlisted in the transaction! Several windows service endpoints hosting WCF services over TCP Single SQL Server 2005 instance beneath Linq to Sql Remote client receives event callbacks over WCF/TCP The issue is tricky to reproduce - usually following restart of services. We suspect a callback to the client machine is occurring within the context of a transaction. Just wondering if anyone has seen similar issues?? Ken

    Read the article

  • "An internal error occurred." when loading pfx file with X509Certificate2

    - by tmp3128
    I'm trying use self-signed certificate (c#): X509Certificate2 cert = new X509Certificate2(Server.MapPath("~/App_Data/myhost.pfx"), "pass"); on a shared web hosting server and I got an error: System.Security.Cryptography.CryptographicException: An internal error occurred. stack trace ends with System.Security.Cryptography.CryptographicException.ThrowCryptogaphicException(Int32 hr) +33 System.Security.Cryptography.X509Certificates.X509Utils._LoadCertFromFile(String fileName, IntPtr password, UInt32 dwFlags, Boolean persistKeySet, SafeCertContextHandle& pCertCtx) +0 System.Security.Cryptography.X509Certificates.X509Certificate.LoadCertificateFromFile(String fileName, Object password, X509KeyStorageFlags keyStorageFlags) +237 System.Security.Cryptography.X509Certificates.X509Certificate2..ctor(String fileName, String password) +131 On my dev machine it loads ok. The reason I load *.pfx not a *.cer file because I need a private key access (cer file loads Ok). I made pfx on my dev mochine like that: makecert -r -n "CN=myhost.com, [email protected]" -sky exchange -b 01/01/2009 -pe -sv myhost.pvk myhost.cer pvk2pfx -pvk myhost.pvk -spc myhost.cer -pfx myhost.pfx -po pass Please assist; PS: makecert is a v5.131.3790.0

    Read the article

  • IIS 7, Asp.Net 4: Server cannot append header after HTTP headers have been sent?

    - by Amitabh
    I am getting the following warnings on the Event Log for a Asp.Net WebSite running on IIS 7. Exception information: Exception type: HttpException Exception message: Server cannot append header after HTTP headers have been sent. at System.Web.Hosting.ISAPIWorkerRequest.SendUnknownResponseHeader(String name, String value) at System.Web.HttpResponse.WriteHeaders() at System.Web.HttpResponse.Flush(Boolean finalFlush) at System.Web.HttpRuntime.FinishRequest(HttpWorkerRequest wr, HttpContext context, Exception e) I tried to debug the WebSite but it just does not show in debugger. The web page which has got this issue contains the following. Its a content page with a Master page. It has a grid inside an UpdatePanel which is Triggered by a Timer. On the specified time grid data is refreshed. Everytime this happens we see a new warning in the EventLog. What is the best way to go about this issue?

    Read the article

  • Does GoDaddy supports RESTful services via WCF

    - by Amir Naor
    After deploying a WCF RESTful service that i created using the REST started kit, i got several errors that i managed to solve following this post: http://www.edoverip.com/edoverip/index.php/2009/01/30/running-wcf-on-godaddy Now i'm stuck with this error: IIS specified authentication schemes 'Basic, Anonymous', but the binding only supports specification of exactly one authentication scheme. Valid authentication schemes are Digest, Negotiate, NTLM, Basic, or Anonymous. Change the IIS settings so that only a single authentication scheme is used I saw that others got to this point without a solution. GoDaddy support dont know nothing. Is it possible at all? Are there any web hosting services that you know that support that?

    Read the article

  • CNAME Record in .htaccess file: correct format?

    - by Josh
    In my .htaccess file, I have set up several A records in the following structure: RewriteCond %{HTTP_HOST} ^domain.com$ [OR] RewriteCond %{HTTP_HOST} ^www.domain.com$ RewriteRule ^substring\/substring\/etc?$ "http\:\/\/domain\.com\/newsubstring\/etc\/" [R=301,L] Is is possible to easily set up a CNAME record in the same fashion and put it in my .htaccess file? Unfortunately, my dumb DNS (namecheap) doesn't let me change CNAME records because my site actually has hosting and isn't just a parked domain. (I actually just want to set up a CNAME for www, since at the moment www.domain.com doesn't work for me, and only domain.com -- I'm going to point the former to the latter.)

    Read the article

  • Silverlight doesn't prompt to increase quota

    - by Sung Meister
    I am trying out Silverlight's Isolated Storage feature. Currently running Silverlight thru ASP.NET page. I have written some code to request an additional storage but I am not being prompted to add more. private void requestButton_Click(object sender, RoutedEventArgs e) { using (IsolatedStorageFile store = IsolatedStorageFile.GetUserStoreForApplication()) { if (store.AvailableFreeSpace >= 1000*1024) return; long usedSpace = store.Quota - store.AvailableFreeSpace; if (store.IncreaseQuotaTo(usedSpace + 1000*1024)) statusTextBlock.Text = string.Format("Quota has been increased to {0}", store.Quota); else statusTextBlock.Text = "You have denied quota increase... you Inglorious Basterd..."; } } Silverlight's Application Storage tab doeslist the localhost ASP.NET page hosting Silverlight as shown below. According to the screenshot, http://localhost:54389 has 1.0MB of available storage area. Is there a restriction set on localhost websites that a prompt is ignored? What are the required steps for Silverlight to prompt users to increase quota?

    Read the article

  • Problem in apache2 with mod rewrite when setting rules in .conf files instead of .htaccess

    - by gonzlikes
    Hi, Because of weird security policies of my hosting provider I have to define my rewrite rules in /etc/apache2/conf.d/examplesite.conf instead of writing them on an .htaccess on the www folder of that site. What I'm trying to do is setup a Wordpress Mu server (http://mu.wordpress.org/forums/topic/17349 ) and so far its working on a 50%. The main blog loads perfectly but other sub blogs (located for example at www.example.com/blog2 ) don't. I'm guessing the problem is that the rewrite rules behave differently when declared at .conf files for each virtual host instead of using .htaccess files. Has anybody else had this problem? How can you fix it?

    Read the article

  • WF4 workflow versioning using WorkflowServiceHost

    - by rwwilden
    Related to this question. I understand how to implement versioning of workflows using WorkflowApplication. If you keep the original XAML definition for older versions of your workflow around, you can load them using the right WorkflowApplication constructor. How could you ensure that WorkflowServiceHost uses the correct workflow definition when you want to host your workflows in IIS? There is a WorkflowServiceHost constructor that you can use to load a workflow definition, but when you are hosting inside IIS through a XAMLX file, you do not call WorkflowServiceHost yourself, this is handled somehow by IIS. So how do I ensure that the correct workflow definition is loaded for the right version of my workflow?

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >