Search Results

Search found 13776 results on 552 pages for 'high technology'.

Page 213/552 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Cisco QoS Guidance

  - by Kyle Brandt

  I have a 10M connection to the internet that is hooked into a 100M port. I am getting started with QoS, and am hopping for a little guidance on setting it up on a Cisco 3825 router. Right now I am going forward with the idea that I have to implement it on my router, and the provider can't provide QoS for me. How I envision it working is that the QoS will drop or queue packets on my router and that will help prevent a situation where the provider has to start dropping a lot of packets. Right now all I am tasked with is making sure that one of the 3 LANs gets a certain slice (say 3M for Gig Lan1) of the 10M internet connection (But ideally this will be more flexible in the Future). 10M Internet on 100M port on HWIC-4ESW +-----------------------+ | | Gig Lan1 | Cisco 3825 | Lan3 on HWIC-4ESW | | +-----------------------+ Gig Lan2 I need to learn more about QoS, but having a target technology and maybe example configuration will help me wrap my head around the reading I am doing a little more. Which Cisco QoS Technology do you recommend for this particular situation? Have a basic sample config of how this might work? Right now the 10M line is not congested, so this more to have something in place in case it starts to become mildly congested in the future. I do have VOIP at one location connected to this one over the Internet that goes through a VPN tunnel. Everything else that is between this location and other offices is on a separate MPLS network.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• Understanding Exchange User Monitor (ExMon) Output

  - by SturdyErde

  I recently downloaded and ran ExMon while trying to troubleshoot Outlook connectivity problems due to high CPU usage on Exchange Server 2010 SP2 UR8. The tool provides a great set of data, but I have not yet figured out how to make great use of it. My first question is why the Exchange Server itself shows up as a high-use MAPI client in the ExMon data. Among the users' client versions I see build numbers listed for Outlook 2013, 2010, and yes, even 2007 clients. I also see build number 14.2.387.0, which represents Exchange Server 2010 SP2 Update Rollup 8 (+/- some other patch that makes it not quite match the UR8 number). There are many user rows that list only "::1" and/or the short hostname of my Exchange server in the 'Client IP Addresses' column. Some other columns include the end-user's actual IP address and the Exchange server's IP address. ExMon shows that it is actually Exchange Server that is utilizing the highest percentage of CPU that is used for MAPI calls. I had expected to see 1 IP address and version number for each user reported by ExMon. Instead, most records show multiple version #'s (Exchange ver and Outlook ver) and multiple IPs (Exchange IP and client IP). Can anyone explain the reason for this to me, please?

  Read the article

• Recommendations for hosting large videos

  - by Clinton Blackmore

  I recently created and put a 45-minute, 300 MB video file on my website and told a mailing list about it. Checking my site stats, I see that I've used 20% of my "unlimited" bandwidth for the month. As I want to be able to have several videos like this, clearly, I need to consider other options. The appeal to hosting files as my own site (aside from the supposedly unlimited disk space and bandwidth), is to be able to have control over the format, resolution, and quality of the video(s), as well as to ensure that it is clear that I'm the copyright holder (although the videos will be under a creative commons license). I find that for the screencasts I'm making, having a high resolution (say 3/4 of 1024 * 768) really makes seeing what is going on on the screen easier. It is also always a plus to not have the experience marred by advertisements. One more wrench to throw in is that while the videos are non-commercial, they do promote a club, and it seems that that falls afoul of some terms of services (especially for free services; while free is very nice, I will certainly consider putting up some money.) What recommendations do you have for (fairly) long, high-resolution videos? Should I look in depth at sites like YouTube and Vimeo, should I be considering a filesharing site [I have no qualms with someone downloading the entire video first -- I wouldn't want to watch 45 minutes in my browser!], hosting files with Bittorent (ugh -- I think that'd reduce my audience), or should I be looking into other web hosts (and if so, who?)

  Read the article

• Troubleshooting loss of network connectivity in Windows 2003 - What else to check?

  - by Benny

  We are facing a weird problem in our data center. Our Backup server (running EMC Networker) loses network connection every alternate day around 3:00 AM (Backup schedule starts at midnight). After 2 hours of outage, the network connectivity recovers automatically and back to normal. What we observed: It is unlikely to be network issue, since it is directly connected to server farm switch (layer 2 connection without any intermediate hops). Further, the server is connected to two different switches for Load balancing using Broadcomm Teaming. a) If it were a switch related issue it is unlikely that both the network ports go down, since they are connected to different switch. b) A possibility Vlan wide issue is also ruled out since other devices in the same Vlan are fine. c) Switch interface status is always up. But there are lot of packet drops during the outage period - Can be attributed to high interface utilization of the backup server (near 100%) d) Connectivity is restored without any change on network. Next suspect is resource utilization on Windows server. Both CPU and Memory have rarely exceeded 80%, but NIC card utilization is alarmingly high (near 100%) Not really sure how to investigate this?

  Read the article

• NGINX server_name issues

  - by Unai

  I have the following simple server block on NGINX: server { listen 80; listen 8090; server_name domain.com; autoindex on; root /home/docroot; location ~ \.php$ { include /usr/local/nginx/conf/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/docroot$fastcgi_script_name; fastcgi_pass 127.0.0.1:9000; } } After I include the relevant settings on my hosts file I get the following (unexpected) behavior: http: //domain.com/ and http: //domain.com:8090/ work fine; http: //domain.com:8090/future-cell-phone-technology-01-150x150.jpg works; http: //domain.com/future-cell-phone-technology-01-150x150.jpg - ERROR! "The connection was reset" (note.- added a space after http: to avoid link protection but this is not really promoting anything) I've been troubleshooting (3) for a couple hours and I'm unable to identify the culprit. I'm running NGINX 1.0.10 (latest stable) on Debian 6.0.2 32 bits. This NGINX instance runs another 40 or 50 sites with no problems.

  Read the article

• Can anyone explain these differences between two similar i7 processors? [closed]

  - by Brian Frost

  I have two systems I've just built. They both have i7 processors and Asus P8Z77 motherboards. When I run a simple processor loop benchmark that I wrote in Delphi some time back I get one machine showing nealry twice as fast as the other. I then used CPU-Z to dump me the details of the hardware and I see that the fast machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2700K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 3610.7 MHz Multiplier x FSB 36.0 x 100.3 MHz Stock frequency 3500 MHz the slow machine shows: Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 8 (max 16) Name Intel Core i7 2600K Codename Sandy Bridge Specification Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.7 Extended CPUID 6.2A Core Stepping D2 Technology 32 nm TDP Limit 95 Watts Core Speed 1648.2 MHz Multiplier x FSB 16.0 x 103.0 MHz Stock frequency 3400 MHz i.e the slow machine has a 2600k to the fast machine 2700k. The very different "Multiplier x FSB" must be significant but I dont understand how two processors with a very 'similar' number can be so different. To get the machines the same must I copy the processors or is there some clever setting that I can change? Thanks for any help. Brian.

  Read the article

• Cheap desktop computer in 19" rack-mountable form-factor?

  - by Alex Basson

  I'm a high school teacher at a small private school. As of this year, we have SMARTBoards in every classroom (though I've had one in the class I share for two years now). The classrooms themselves don't have computers in them, so we teachers bring our laptops to class and connect them to the boards. This has several disadvantages: This takes a few minutes while we wait for the board to boot up and then orient the board to our individual laptop -- we have to do this every time b/c different teachers have different laptops requiring different orientations. This isn't ideal because when you only have 43 minutes per class period, waiting five minutes just to get started is a real waste. Carrying your laptop to class doesn't sound so bad until you consider that we're also carrying textbooks and piles of student papers, and we're carrying it all through crowded high school hallways. More than one laptop has fallen THUNK to the floor, with dire consequences. We feel we could eliminate the need to use our laptops with the SMARTBoards if we had a dedicated computer in each classroom hooked up to the board at all times. Each board set-up is connected to a podium with a standard 19" rack in it, currently housing a power supply and DVD player. There're plenty of rack spaces available. So I'm thinking: maybe we could get some inexpensive computers in a 19" rack-mountable form factor, install them in the podiums, and connect them to the boards on a permanent basis. Any suggestions?

  Read the article

• Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

  - by Strahn

  I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

  Read the article

• PC shut downs automatically after 10-20 second. No POST screen, no beeps

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

  Read the article

• DV-AVI in DivX Plus Player and VirtualDub - playback issue

  - by user714965

  I have an AVI-video which I had (digitally) transferred from a DV camera to my PC. The video contains errors at the beginning most likely because the DV tape was pretty old. When playing this video in the DivX Plus Player I get some picture artefacts and some high noise peaks of the sound. These stops after two seconds. When I'm playing this video in VirtualDub (where I want to cut it) I get the same picture artefacts. But the sound errors (those loud high peaks) lasts ten seconds. These sound errors are also contained in the cutted video. Why does the video have more errors when played in VirtualDub? I think because of different codecs which are used for decoding the video? How can I change the codec which VirtualDub uses for decoding? I have installed ffdshow for this but it seems that it is not used because I don't get the ffdshow icon in the taskbar when playing the video in VirtualDub. When playing in DivX Player Plus I get this icon.

  Read the article

• Apache process consumes too much CPU

  - by Niro

  I have an ubuntu apache/php server running php doing appx 100 hits/sec and a PHP cron running in the background. I get occasionally high CPU load on one of the Apache processes which stays high regardless of traffic or cron activity. It seems to me that its stuck in some kind of loop or something. Below you will find the top and strace info. How can I find where the bad code is and what causes this? top - 14:45:24 up 3 days, 3:38, 1 user, load average: 5.10, 5.88, 5.85 Tasks: 163 total, 5 running, 158 sleeping, 0 stopped, 0 zombie Cpu(s): 47.8%us, 18.5%sy, 0.0%ni, 10.2%id, 0.0%wa, 0.0%hi, 1.8%si, 21.6%st Mem: 7885012k total, 3858484k used, 4026528k free, 177444k buffers Swap: 0k total, 0k used, 0k free, 1037868k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10736 www-data 20 0 769m 559m 478m R 69 7.3 29:08.30 apache2 10844 www-data 20 0 824m 601m 492m S 17 7.8 4:37.90 apache2 1016 root 20 0 242m 25m 4628 S 6 0.3 162:07.93 scalarizr 9030 www-data 20 0 879m 619m 492m S 4 8.0 5:06.82 apache2 20216 www-data 20 0 747m 228m 170m S 4 3.0 0:01.94 apache2 10807 www-data 20 0 814m 584m 492m S 3 7.6 4:54.10 apache2 10455 www-data 20 0 831m 574m 492m S 3 7.5 4:32.65 apache2 10495 www-data 20 0 849m 592m 492m S 3 7.7 4:41.10 apache2 10884 www-data 20 0 840m 581m 492m S 3 7.6 4:25.06 apache2 ^CProcess 10736 detached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 74.55 0.148052 1 109755 gettimeofday 25.36 0.050370 0 164634 clock_gettime 0.09 0.000178 0 54878 poll ------ ----------- ----------- --------- --------- ---------------- 100.00 0.198600 329267 total root@ec2-67-202-54-36:~# ^C

  Read the article

• Can I run Excel 2010 on a server?

  - by Glen Little

  This question is not about a person using Excel on a computer that happens to have an Windows Server OS. And it is not about using any Sharepoint services features! The question is about automated processes that use code (Office Automation) to open Excel files, manipulate them, run calculations, read data, save copies of the file and close the files... all in code. In previous versions of Excel the licensing agreement prevented use on a public server, notes from Microsoft warned about the problems trying to use Office Automation in a server environment, and we were warned that Excel was single threaded and not designed for use on a server. Most of the articles about this were written before Office 2010. But now, Excel 2010 is designed to work on a High Performance Computing server using HPC Services for Excel. One HPC document mentions "Windows HPC Server 2008 R2 includes a comprehensive pop-up manager that can handle occasional dialog boxes and pop-up messages". So my question is... is it now "safe" to run code that automates Excel 2010 on a "normal" server without using the HPC services? If not, can the HPC Services for Excel work on a single server? I don't need the high performance, distributed computing, aspect of HPC Services for Excel... just the ability to run Excel on a server. Can that now be done? Thanks, Glen

  Read the article

• IPtables - Accept Arbitrary Packets

  - by Asad Moeen

  I've achieved a lot on blocking attacks on GameServers but I'm stuck on something. I've blocked major requests of game-server which it aceepts in the form "\xff\xff\xff\xff" which can be followed by the actual queries like get status or get info to make something like "\xff\xff\xff\xff getstatus " but I see other queries if sent to the game-server will cause it to reply with a "disconnect" packet with the same rate as input so if the input rate is high then the high output of "disconnect" might give lag to the server. Hence I want to block all queries except the ones actual clients use which I suppose are in the form "\xff\xff\xff\xff" or .... so, I tried using this rule : -A INPUT -p udp -m udp -m u32 ! --u32 0x1c=0xffffffff -j ACCEPT -A INPUT -p udp -m udp -m recent --set --name Total --rsource -A INPUT -p udp -m udp -m recent --update --seconds 1 --hitcount 20 --name Total --rsource -j DROP Now where the rule does accept the clients but it only blocks requests in the form "\xff\xff\xff\xff getstatus " ( by which GameServer replies with status ) and not just "getstatus " ( by which GameServer replies with disconnect packet ). So I suppose the accept rule is accepting the simple "string" as well. I actually want it to also block the non-(\xff) queries. So how do I modify the rule?

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• How far should we take the N+N redundancy craziness ?

  - by Brann

  The industry standard when it comes from redundancy is quite high, to say the least. To illustrate my point, here is my current setup (I'm running a financial service). Each server has a RAID array in case something goes wrong on one hard drive .... and in case something goes wrong on the server, it's mirrored by another spare identical server ... and both server cannot go down at the same time, because I've got redundant power, and redundant network connectivity, etc ... and my hosting center itself has dual electricity connections to two different energy providers, and redundant network connectivity, and redundant toilets in case the two security guards (sorry, four) needs to use it at the same time ... and in case something goes wrong anyway (a nuclear nuke? can't think of anything else), I've got another identical hosting facility in another country with the exact same setup. Cost of reputational damage if down = very high Probability of a hardware failure with my setup : <<1% Probability of a hardware failure with a less paranoiac setup : <<1% ASWELL Probability of a software failure in our application code : 1% (if your software is never down because of bugs, then I suggest you doublecheck your reporting/monitoring system is not down. Even SQLServer - which is arguably developed and tested by clever people with a strong methodology - is sometimes down) In other words, I feel like I could host a cheap laptop in my mother's flat, and the human/software problems would still be my higher risk. Of course, there are other things to take into consideration such as : scalability data security the clients expectations that you meet the industry standard But still, hosting two servers in two different data centers (without extra spare servers, nor doubled network equipment apart from the one provided by my hosting facility) would provide me with the scalability and the physical security I need. I feel like we're reaching a point where redundancy is just a communcation tool. Honestly, what's the difference between a 99.999% uptime and a 99.9999% uptime when you know you'll be down 1% of the time because of software bugs ? How far do you push your redundancy crazyness ?

  Read the article

• issues with Nginx + Passenger Production setup - Loading time/request time delay

  - by Dani Cela

  having a bit of an issue relating to request time. I have NGINX as a proxy server for a ruby on rails app running passenger. I also have a postgresql database server which is running on its own VM separate from my nginx/application server. My issue is that when I try and access my products page which does a lot of database queries, my query takes maybe 3-4 seconds. The second I flood the web server with requests, i will choke out the web server and have requests take almost 20-30 seconds to process. The rails server and database server do not crash, and the usage is not that high. Each server has more than enough memory, even cpu usage on the rails server isn't more than 85%, albeit thats high but its not maxing it out. Is my problem related to my nginx proxy server? I dont really know how to fully explain this so if you have a question please ask it and I can clarify what I mean. EDIT: to see exactly what i mean relating to the database query, see http://207.245.4.215/products

  Read the article

• ixgbe driver: Limit the max number of cores

  - by Shellex Wai

  I have a Linux workstation with 48 cores and runs ixgbe driver for fiber interface. And I have to test a project name Netmap on it. NetMap is a high performance network framework for high speed interfaces, which has been ported to Linux recently. For some reasons, I must try it on the machine. So I compile it and follow the instructions to run the test problems, but it doesn't work. I check dmesg and it says: [10399.085736] 794.159015 netmap_set_ringid [486] ringid o4o1 set to all 48 HW RINGS [10399.085742] 794.282011 netmap_obj_malloc [220] netmap_if request size 816 too large I asked the author of netmap for help. He told me that I have too many cores in the machine and it should work if I tell ixgbe use less cores (2 to 4 is ok). I am not familiar to driver development and I don't know how to limit the ring numbers by passing arguments to ixgbe driver. So I check the spec from intel's website but found nothing about it. So I come here for more helps. Thank you.

  Read the article

• how to block spam email using Microsoft Outlook 2011 (Mac)?

  - by tim8691

  I'm using Microsoft Outlook 2011 for Mac and I'm getting so much spam I'm not sure how to control it. In the past, I always applied "Block Sender" and "Mark as Junk" to any spam email messages I received. This doesn't seem to be enough nowadays. Then I've started using Tools Rules to create rules based on subject, but the same spammer keeps changing subject lines, so this isn't working. I've been tracking the IP addresses they also seem to be changing with each email. Is there any key information I can use in the email to apply a rule to successfully place these spam emails in the junk folder? I'm using a "Low" level of junk email protection. The next higher level, "high", says it may eliminate valid emails, so I prefer not to use this option. There's maybe one or two spammers sending me emails, but the volume is very high now. I'm getting a variation of the following facebook email spam: Hi, Here's some activity you have missed. No matter how far away you are from friends and family, we can help you stay connected. Other people have asked to be your friend. Accept this invitation to see your previous friend requests Some variations on the subject line they've used include: Account Info Change Account Sender Mail Pending ticket notification Pending ticket status Support Center Support med center Pending Notification Reminder: Pending Notification How do people address this? Can it be done within Outlook or is it better to get a third party commercial software to plug-in or otherwise manage it? If so, why would the third party be better than Outlook's internal tools (e.g. what does it look for in the incoming email that Outlook doesn't look at)?

  Read the article

• HP/Lenovo alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/Lenovo? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• Laptop authentication/logon via accelometer tilt, flip, and twist

  - by wonsungi

  Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• How can I get Windows 8 to automatically disable touch when I am using my Wacom pen and turn it back on when I am not

  - by Robert

  I have an HP convertible tablet computer which I just upgraded to Windows 8. The problem (which existed under Windows 7 as well) is that this tablet has both a capacitive touch screen (with multi-touch) AND a wacom-type tablet built in to the screen that works using electro-magnetic resonance with the provided stylus. My Use Case: Most of the time I am happy using my fingers and the touch interface for navigation and whatnot. However, when I want to get down to serious note-taking/drawing, I want to use the wacom functionality. The problem is that any comfortable writing position has me resting my arm/hand on the screen, which activates the touch technology (despite supposed palm-detection algorithms) and completely screws up my input paradigm. My Ideal Solution: Ideallly, since wacom technology senses when the pen is "close" to the screen, I would love to have touch be automatically disabled whenever the wacom pen is detected, and turned back on when it is out of range. this would allow me to seamless switch between the two input methods, and since I NEVER want to use both at once would work perfectly for me. An acceptable alternative: As a next best option, It would be great to be able to turn off the touch functionality (leaving the wacom in place) whenever I entered specific apps (e.g. OneNote, Photoshop, Gimp, Pencil, etc.) and then have it turn back on when I left that app.... As a worst case at least lets me use my PC option: If I could create a shortcut (tile or otherwise) that flips the touch on and off without going all the way through the nested computer settings, that would be better than nothing. Thanks in advance for the help with 1 or more of the above.

  Read the article

• Possible disk IO issue

  - by Tim Meers

  I've been trying to really figure out what my IOPS are on my DB server array and see if it's just too much. The array is four 72.6gb 15k rpm drives in RAID 5. To calculate IOPS for RAID 5 the following formula is used: (reads + (4 * Writes)) / Number of disks = total IOPS. The formula is from MSDN. I also want to calculate the Avg Queue Length but I'm not sure where they are getting the formula from, but i think it reads on that page as avg que length/number of disks = actual queue. To populate that formula I used the perfmon to gather the needed information. I came up with this, under normal production load: (873.982 + (4 * 28.999)) / 4 = 247.495. Also the disk queue lengh of 14.454/4 = 3.614. So to the question, am I wrong in thinking this array has a very high disk IO? Edit I got the chance to review it again this morning under normal/high load. This time with even bigger numbers and IOPS in excess of 600 for about 5 minutes then it died down again. But I also took a look at the Avg sec/Transfer, %Disk Time, and %Idle Time. These number were taken when the reads/writes per sec were only 332.997/17.999 respectively. %Disk Time: 219.436 %Idle Time: 0.300 Avg Disk Queue Length: 2.194 Avg Disk sec/Transfer: 0.006 Pages/sec: 2927.802 % Processor Time: 21.877 Edit (again) Looks like I have that issue solved. Thanks for the help. Also for a pretty slick parser I found this: http://pal.codeplex.com/ It works pretty well for breaking down the data into something usable.

  Read the article

• Switching from Onboard intel to Nvidia Dedicated GPU

  - by Anarkie

  How can I switch from Intel onboard grpahics to Nvidia Dedicated GPU? When I go to windows screen resolution I see intel. I cant change it. I go to Device Manager, I see both Adapters are there and Nvidia is known.I disabled intel, I didnt see any option to set one as primary so I disabled intel, black screen!Reboot and re-enable intel. I right click on the desktop, choose "Nvidia Control Panel" and on 3D options I chose the desired game I want to play, High performance Nvidia, but it didnt switch when I started the game. Then I made preferred GPU in the global settings High performance Nvidia for everything it still didnt change.I understand to save the battery etc. there is a switch option between these two but I dont see this switch when it is necessary, I cant also switch manually?Is there a manual switch FN key?I looked but couldnt find. Why I want to do this? 1) Better game peformance. 2) I want to play an old game from 2002(Diablo 2 LOD), when I start the game there are black bars on the sides, so screen becomes just smaller which I dislike!I heard this is intel's specification to center the display.But instead I would like to scale or expand it to fit widescreen(fullscreen).Which should be possible with Nvidia. My Notebook Specs: Fujitsu Lifebook AH531, Win7 , 64 bit, i5, intel HD graphics onboard, Nvidia GT 525. I didnt install Nvidia later, it was always installed and ready from the moment I turned on the computer first time. How I determined that the cards werent switched when I am playing the game: with the windows key I exited from the game, then looked at screen resolutions menu, still saw intel, also the game was still with black bars.I know intel GPU should enough for Diablo 2 but I am interested in this answer for further games, I dont always play Diablo, what if I install an up to date game for example?Then Intel will not be sufficient.I would like to learn the switch option.

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >