Search Results

Search found 16790 results on 672 pages for 'phone state listener'.

Page 213/672 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• How to configure Linux to act as a Bluetooth RFCOMM SPP server?

  - by regulatre

  I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things. My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie. I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch). I imagine I have to start with something like sdptool add SP But then what? I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.

  Read the article

• Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  - by cwd

  I have Google Apps installed and I have tried to set up Outlook 2007 to send messages via SMTP. I followed the guide, selecting what I believe are all the correct settings. Yes, I am using POP for incoming, that is intentional but I don't believe it should affect outgoing messages. When I log into gmail (google apps) for my company, I can send a message that has an 8MB attachment (pdf file, not zipped or anything) and it sends fine. However, when I send the same message in Outlook with that same 8mb attachment it fails. Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps? The message headers are (some info omitted for privacy): Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 #5.3.4 message size exceeds limit (state 17). ----- Original message ----- DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=company.com; s=google; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=IJwwxuIEdg1E4zXuGjeDod+1w3RYBBCNzSsqpuX77ih36HSiq++s3ZCQXPeU9CIZVg K8JPJQu9xjivYYjrRaYwyeowLIu0GIdR2h4kKEkFM/GNC2RFF3VwVgj+gvi5eqVZIuWn osT5/VEm10IED6B54NPOtGMgFTci6a57zzVKE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language :x-gm-message-state; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=LjTecjok5K71Bymp6tZqAL2XCz03hWROV1mTK8Vf2AeEJwtel9ACu9kE5jW5iJqckb upYKPzoqYLBwAPOzMb9asWoTAZPzC7LMG65eDUc2/ZEvGqXrZs3ziUxwhF4t169yRVuy /6nm/aAt5uPMLPdobxGTJ8ahOIku1Z3gW+OcvZ6ERk1Av/bvuln09vcnyJIrHGh7eK8n cbGVxmK0aecgSPgIj2NALbHkyuxwj+LEBRV6uiz3THDjxAiNfsO5UFjV59sD+lVSBT3z ThOGE8WEXRnKHuP3FuKXyeUxKBZ2CxpWJpvDuS9EsFkln7zkISYEsRA0nUA6GSGi2Z/n 8YUg== Received: by 10.60.169.197 with SMTP id ag5mr12254920oec.137.1351036287413; Tue, 23 Oct 2012 16:51:27 -0700 (PDT) References: Date: Tue, 23 Oct 2012 19:51:16 -0400 Message-ID: <003a01cdb179$4bb2ca60$e3185f20$@com> MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_NextPart_000_003B_01CDB157.C4A12A60" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ac2xVCHGxoC7DDOkQBK3JSXowHb0EQAEB7agAAA/YKAAAIGcQAAAngfQAABAAPAAAFe7gAAAadvw AALgvLA= Content-Language: en-us X-Gm-Message-State: ALoCoQniMq7Fnh+NlfoWjTJPvKWbkhEaftSaFo9ZVvtRpWufTmhlRDx1a9Jf+wmYcbRh896gygNr The company I am sending email to is a company that uses Google Apps for Teams. This is their apps admin login. Should I be worried about that message? My Settings On the Google apps side I have set my SPF record and set / verified my DKIM key. Here are my outlook settings: Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  Read the article

• Windows Server 2008 R2 bare metal restore to different hardware

  - by S Falken

  Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

  Read the article

• DRBD with MySQL

  - by tdimmig

  Question about using DRBD to provide HA for MySQL. I need to be sure that my backup MySQL instance is always going to be in a functional state when the failover occurs. What happens, for example, if the primary dies part way through committing a transaction? Are we going to end up with data copied to the secondary that mysql can't handle? Or, what if the network goes away while the two are syncing, and not all of the data makes it across. It seems like it's possible to get into a state where incomplete data on the secondary makes it impossible for mysql to start up and read the database. Am I missing something?

  Read the article

• VirtualBox error with Ubuntu virtual machine

  - by user2985363

  I am trying to work on a coding project and cannot open my Ubuntu virtual machine with Oracle VM VirtualBox. I took a snapshot yesterday at about 11, and it was working fine. Several times I closed and reopened it. Today when I tried to open it, I kept getting the error below. Failed to open a session for the virtual machine Ubuntu 12.04 32-bit. VM cannot start because the saved state file 'C:\Users\Tyler\VirtualBox VMs\Ubuntu 12.04 32-bit\Snapshots\2014-01-30T19-59-05-976647800Z.sav' is invalid (VERR_FILE_NOT_FOUND). Deleted the saved state prior to starting the VM. I tried deleting the file as it said, but none of the snapshots would open still. The file is still in my recycling bin. What can I do? Also, I took the 1/31 snapshot today before I deleted the previous one.

  Read the article

• Puppet: hanging at Schedule[weekly]

  - by Andrei Serdeliuc

  Why would puppet hang at Schedule[weekly]? I'm running puppet in a masterless setup, so to apply by manifest I'm just running puppet apply /etc/puppet/manifests/site.pp In debug mode, these are the last things it says before it just hangs debug: /Schedule[never]: Skipping device resources because running on a host debug: /Schedule[daily]: Skipping device resources because running on a host debug: /Schedule[monthly]: Skipping device resources because running on a host debug: /Schedule[puppet]: Skipping device resources because running on a host debug: /Schedule[hourly]: Skipping device resources because running on a host debug: /Schedule[weekly]: Skipping device resources because running on a host If I send a SIGINT, it says Exiting debug: Storing state debug: Stored state in 0.03 seconds debug: Finishing transaction 69992657242500 Thanks

  Read the article

• Port Forwarding Using iptables on Ubuntu

  - by user141610

  This is the scenario. I have configured a web-server in MUX. Now I want to access that web-server from Internet. Ubuntu box has two interfaces, One is connected to WAN (Public IP) and another one is connected to MUX (Private IP). MUX has no option to insert default gateway. iptables -t nat -A PREROUTING -p tcp -i eth0 -d 103.x.x.x --dport 8001 -j DNAT --to-destination 192.168.1.2:8080 iptables -A FORWARD -p tcp -d 192.168.1.2 --dport 8080 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT It does not work. Thanks...

  Read the article

• Is looking for Wi-Fi access points purely passive?

  - by Aric TenEyck

  Say I carry a Wi-Fi enabled phone or laptop through an area where there are WAPs. Assuming that I don't actively try to connect to them or otherwise interact with them, is it possible for the owner of that WAP to know that I was there? I'm asking this in the context of my earlier question: Looking for MACs on the network I was talking with a friend about my newfound ability to detect phones (and other devices with MAC addresses) on the network, and he pointed out that it might be useful to detect unknown phones on the network; I could use that data to track down anyone who was in my house and brought a Wi-Fi phone with them. So, if I set up a logging fake WAP with no security or encryption, can I glean any useful information about the devices that come into the house? Assuming that the thief doesn't actively try to connect...

  Read the article

• Detection of battery status totally messed up

  - by Faabiioo

  I already posted this question in the Ubuntu forum and stackOverflow. I forward it here with the hope to find some different opinions about the problem. I have an Acer TravelMate 5730, which is 3 y.o., running Ubuntu 10.04 LTS. One year ago I changed the battery because the old one died. Since then, everything worked like a charm. A week ago I was using my laptop running on battery; it was charged up to 60%. Suddenly it shut down and for about 24h it was like the battery was totally broken: it didn't charge anymore and the 'upower --dump' said state: critical. I was kind of resigned to buy a new battery, when suddenly the orange light became green: battery was charged and actually working; strangely the battery indicator was stuck to 100%, even after 2 hours running. I tried again with 'upower --dump' or 'acpi -b' commands and it kept saying battery is discharging, though maintaining the percentage to 100%. Thus, battery working fine up to 3 hours, without any warning when it was almost empty, likely to result in a brute shut down. Today something different. the 'upower --dump' command says: ... present: yes rechargeable: yes state: fully-charged energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.481 V percentage: 0% capacity: 100% technology: lithium-ion I tried to boot WinXP and the problem is pretty much the same, with the battery fully-charged, percentage equal to 0% and no way to fix it. While writing, the situation has changed again: present: yes rechargeable: yes state: charging energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.474 V percentage: 0% capacity: 100% technology: lithium-ion ...charging, but it does not charge up. (Recall, the battery lasted 3 hours until yesterday!). So, the big question is: is it an hardware issue, like a dedicated internal circuit is broken? or maybe it is just the battery that must be changed. Or, rather, some BIOS problem that could be fixed in some way. I'd appreciate every help that can shed some light on this annoying problem thanks

  Read the article

• Data take on with Drupal 6

  - by Robert MacLean

  We are migrating our current intranet to Drupal 6 and there is a lot of data within the current system which can be classified into: List data, general lists of fields. Common use is phone list of the employees phone numbers. Document repository. Just basically a web version of a file share for documents. I can easily get the data + meta infomation out, but how do I bulk upload the two types of data into Drupal, as uploading the hundred of thousands of items manually is just not acceptable.

  Read the article

• Need help to figure out iptables rule

  - by Master

  I have this iptable rule listing Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- 127.0.0.1 0.0.0.0/0 tcp dpt:3306 acctboth all -- 0.0.0.0/0 0.0.0.0/0 VZ_INPUT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 ACCEPT tcp -- 94.101.25.40 0.0.0.0/0 state NEW tcp dpt:3306 Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 VZ_OUTPUT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 94.101.25.40 0.0.0.0/0 state NEW tcp dpt:3306 I want only localhost and my ip to access tcp 3306. Can i deleted all other rules as shown above. I don't know if i nned to keep any of them or not

  Read the article

• Accessing our Intranet from outside our Network - WITHOUT VPN

  - by westexasman

  We just upgraded our company intranet from an IIS based, ASP (poorly written) server/code base to a Windows Server 2008 r2 (Apache/MySQL/PHP) server. The old server allowed users to login to intranet.xxx.org using there AD user/pass which then lead them to the company Intranet from basically anywhere they had Internet access. We want to mimic that functionality (or change it to something more secure) with the new setup. This was seemingly setup for off-site employees running on a state network. The state network does not allow VPN, therefor, we needed a way to allow those employees access to the Intranet. So, how do we go about allowing users to login from the outside world and gain access to our Intranet?

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• blocking port 80 via iptables

  - by JoyIan Yee-Hernandez

  I'm having problems with iptables. I am trying to block port 80 from the outside, basically plan is we just need to Tunnel via SSH then we can get on the GUI etc. on a server I have this in my rule: Chain OUTPUT (policy ACCEPT 28145 packets, 14M bytes) pkts bytes target prot opt in out source destination 0 0 DROP tcp -- * eth1 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED And Chain INPUT (policy DROP 41 packets, 6041 bytes) 0 0 DROP tcp -- eth1 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW,ESTABLISHED Any guys wanna share some insights?

  Read the article

• Network connection via USB

  - by Fco

  Can I get my Nexus One/Android on my local network over USB instead of WiFi and browse to my computer's IP address, the one to which the phone would be connected to, via USB? For instance, let's say my computer has an IP address 100.1.1.1 and when I go to it from the computer I would go to my localhost and see a website I've set up locally in the computer. Then, I connect my phone to that computer via USB. Can I then go to 100.1.1.1 from the browser and see the same website? All this through the USB, no WiFi?

  Read the article

• How to suspend and resume browser tab groups?

  - by Robin Green

  Modern browsers such as Firefox and Chrome are able to shutdown and restore the same group of tabs they had before the next time you open them, and even sometimes remember additional tab state such as scroll position within the tab. I would like ideally to be able to select a group of tabs (about some coherent theme, perhaps) and save them away into some kind of "folder" that I could later open independently, without opening any other tabs. Obviously I can use bookmarks for this, but bookmarks are kind of old-fashioned. It would be excellent if it could also record forms that I had filled in but not submitted, scroll position, tab position within the tab group, and any other "dynamic" aspects of the current tab state.

  Read the article

• Permissions issue on Fedora with separate home partition

  - by Tres

  I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

  Read the article

• Extensive use of HDD after VmWare Player virtual machine is closed.

  - by Bobrovsky

  Each time I close virtual machine in VmWare Player I see extensive use of HDD in my system. Basically, whole system becomes unresponsive for about 5-7 minutes. Host system is Windows 7 Utimate x64 SP1 with 6 GB of memory, i3-M350 processor. Virtual machine is Windows XP SP3 x86 (2GB of memory allocated for VM). What can be the cause and what can I do to solve the issue? UPDATE: I am not shutting down the VM, I just close Player window and VM saves it's state. System becomes unresponsive right after VM have saved it state (as indicated by Player) and Player itself have closed.

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• Adding custom script on ESXi 5.0

  - by Quzar

  I have an ESXi server that I would like to have run a custom script on every boot that contains esxcli and other commands. I have tried adding the script into init.d and creating an rc.local.d folder with a script, but the etc folder gets rebuilt on startup. I've also tried modifying state.tgz and local.tgz in the /bootbank folder in order to force these files to appear, but that does not seem to work either. Is there any way I can run custom commands on boot? Note: I've tried the advice here ESXi boot process / state storage to no avail. Seems the system was changed between 4.1 and 5.0

  Read the article

• Wifi network stopped being visible (and usable) (Linksys wag320n)

  - by s427

  Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

  Read the article

• Linux Permissions

  - by Tres

  I am running Fedora 12 and I've setup a partition separate from my root partition to keep shared files and home directories. Now, I've been having permission issues where it says the user cannot chdir into their home directory (/files/home/*). Now, I fixed this originally by chmodding / to 0755 and the home directories also to 0755. And yes, the user is the owner:group of their home directory. Now get this, I didn't change a thing, rebooted, everything still works. Great, right? I boot the server up a day later, and now same ol issue. This is a home server that wasn't on at all at any point in between the working state and non-working state. Also, nothing else was modified. Any ideas? Thanks!

  Read the article

• iPhone 3GS Contacts 'Sometimes' Won't Sync Back to Exchange

  - by marcusstarnes

  I don't know if anyone else has experienced this so just thought I'd find out if it's a known issue or if it's just happening to me. since I first got my 3GS, I've had it synced with Micorsoft Exchange (initially 2003, now 2008). If I go into my contacts on the phone and add a new contact it immediately syncs back at my Exchange server and vice versa. However, sometimes if I add a contact via one of the 'quick links' (Like if I get a text from someone not already in my Contacts on the phone, then use the facility to create a contact for this number), while the contact is visible on the iPhone, it 'never' makes it to the Exchange server. Does this happen to anyone else?

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >