auto dimmer - Page 214 - Developer IT

IE9 Beta

- by Daniel Moth

I've been using Internet Explorer 8 since the early pre-release bits, but I never tried IE9 until today – the day the Beta is available. I downloaded it from here: http://www.beautyoftheweb.com/ The download took longer than what I expected, but I was doing other stuff, so no bother. After coming down, it asked me to reboot my computer. Really hate when apps do that, but I did it anyway. The first time I launched it, it prompted me with a list of add-ons I should disable including the start-up time that I could save fore each one. It even let me configure the prompt so, for example, it won't prompt me again unless an add-on contributes to more than 1 second of the startup time. Cool. First thing I noticed is that the search bar had gone and, as you'd expect, you have to search from the address box. I totally despise this feature. The first thing I've been doing with all versions of IE is to turn off the automatic searching from the address bar and now I have no way of searching if I do that. Ridiculous. The second thing I notice is that the tabs are next to the address bar and cannot be moved to go below it. One word for that decision: appalling (and, no, I didn't accidentally drop an 'e' and added an 'l' in the previous word). The third thing I notice to the right is the favorites button (star icon) and when I click on it, it brings up the favorites explorer under it on the right; then I pin the explorer and it jumps to the left(!). Why move the entry point to this feature to the right instead of leaving it on the left is beyond me (other than wanting to retrain me on what I've been used to for all this time), but the fact that pinning it makes it jump sides is… an "astonishing" design decision. As I browse I notice a little annoying pop up in the bottom left every time I hover over a link; there is no status bar. I correctly guessed to right click at the top and turn on the status bar (which also got rid of the popup thereafter) and while I am at it, I bring back my favorites bar which was hidden by default (and am pleased to see that all my favorites are still there). The next thing I notice, I like: IE9 is fast. No joke, I visit sites and they seem to be loading visibly much faster – try it! Beyond the speed, I am interested to find out what else is new. I searched and found a few good links: What's new in Internet Explorer 9 Internet Explorer 9 Features (check out the links under "Clean") Top Features If you are a developer, check out IE's msdn home for many articles, e.g. this section on Canvas and SVG. Either way: wherever you are, get IE9 Beta now and judge for yourself. If you don't like it, you can always uninstall (which auto-restores the previous version). Comments about this post welcome at the original blog.

Read the article

Use Your Favorite Wallpapers in Windows 7 Starter Edition

- by Asian Angel

If you have Windows 7 Starter Edition installed on your netbook, the default wallpaper can get old. If you are tired of looking at the default wallpaper, then join us today as we look at changing it with Oceanis Change Background Windows 7. Special Notes This information is quoted directly from the website and needs to be kept in mind when using Oceanis Change Background Windows 7: If the Oceanis Change Background Windows 7 program no longer works properly after installing some Windows Updates, then uninstall and reinstall the Oceanis Change Background Windows 7 program to have it run properly again. If you ever do an in-place upgrade to another higher level edition of Windows 7 in the future, then be sure to uninstall this Oceanis Change Background Windows 7 program first to avoid incompatibility issues with it in the new edition of Windows 7. It was designed to only work in Windows 7 Starter edition. Before There it is…the default wallpaper everyone with the Starter Edition gets stuck with. Some people may not mind it, but if you are one of the people who really wants something different then get ready to rejoice. After The install file for Oceanis is contained in a zip file so you will need to unzip it to get started. The install process is quick and simple but you will need to do a system restart afterwards. Once you have restarted your computer this is what your screen will look like…do not panic and think that this is all there is to it. This is just the Starter Screen and can be easily changed… Note: Oceanis will auto-start with Windows each time. Using either the Desktop Icon or the Start Menu Entry, open up the Oceanis Main Window. You will see the set of four default wallpapers shown here. At this point the best thing to do is browse for the appropriate folder where you have all of those wonderful new wallpapers just waiting to be used. Note: We found Stretch to be the best Picture Position setting on our system. For our example we had three ready and waiting. We decided to try out the Wallpaper Slideshow feature first. We chose a time frame and saved our changes. Here are our three wallpapers as they switched through. This can be much more interesting than the default wallpaper. There was only one quirk that we encountered while using the Slideshow Setting. On occasion if we minimized a non-maximized window there would be a leftover partial image in place of the window. Our suggestion? Go with one wallpaper at a time and the settings shown below. These are the settings that we had terrific luck with…Only one picture selected, Picture Position = Stretch, & Change Picture Every = Every Day. Using these settings, the Starter Edition acted just like any of the other editions with regard to wallpaper management. Conclusion If you have grown tired of looking at the default wallpaper in Windows 7 Starter Edition then you will certainly appreciate what Oceanis Change Background Windows 7 can do to fix that problem. For more ways to customize your Windows 7 Started Edition, be sure to to check out how to personalize Windows 7 Starter. Links Download Oceanis Change Background Windows 7 Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Awesome Desktop Wallpapers: The Windows 7 EditionHow To Customize Wallpaper in Windows 7 Starter EditionDesktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day

Read the article

Start fail VMware-Player 3.1.5 on Ubuntu 12.04 32bit

- by Chris Lee

Install got no problem but at start of VMWare Player it want to compile and exit with this error: "Unable to build kernel module." Thats the log: Jun 05 00:03:36.153: app-3075712704| Log for VMware Workstation pid=3709 version=7.1.5 build=build-491717 option=Release Jun 05 00:03:36.153: app-3075712704| The process is 32-bit. Jun 05 00:03:36.153: app-3075712704| Host codepage=UTF-8 encoding=UTF-8 Jun 05 00:03:36.153: app-3075712704| Logging to /tmp/vmware-root/setup-3709.log Jun 05 00:03:36.284: app-3075712704| modconf query interface initialized Jun 05 00:03:36.284: app-3075712704| modconf library initialized Jun 05 00:03:36.336: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.350: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.371: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.417: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.429: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.521: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.526: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.529: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.533: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.536: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.579: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.583: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.586: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.589: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.593: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.602: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.624: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.677: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.689: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.694: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.697: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.701: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.711: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.733: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.854: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.858: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.862: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.865: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.868: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.065: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.066: app-3075712704| Building module vmmon. Jun 05 00:03:40.066: app-3075712704| Extracting the sources of the vmmon module. Jun 05 00:03:40.075: app-3075712704| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-24-generic-pae/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 Jun 05 00:03:42.016: app-3075712704| Failed to compile module vmmon! Is it a gcc problem ?

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Sprite animation in openGL - Some frames are being skipped

- by Sid

Earlier, I was facing problems on implementing sprite animation in openGL ES. Now its being sorted up. But the problem that i am facing now is that some of my frames are being skipped when a bullet(a circle) strikes on it. What I need : A sprite animation should stop at the last frame without skipping any frame. What I did : Collision Detection function and working properly. PS : Everything is working fine but i want to implement the animation in OPENGL ONLY. Canvas won't work in my case. ------------------------ EDIT----------------------- My sprite sheet. Consider the animation from Left to right and then from top to bottom Here is an image for a better understanding. My spritesheet ... class FragileSquare{ FloatBuffer fVertexBuffer, mTextureBuffer; ByteBuffer mColorBuff; ByteBuffer mIndexBuff; int[] textures = new int[1]; public boolean beingHitFromBall = false; int numberSprites = 20; int columnInt = 4; //number of columns as int float columnFloat = 4.0f; //number of columns as float float rowFloat = 5.0f; int oldIdx; public FragileSquare() { // TODO Auto-generated constructor stub float vertices [] = {-1.0f,1.0f, //byte index 0 1.0f, 1.0f, //byte index 1 //byte index 2 -1.0f, -1.0f, 1.0f,-1.0f}; //byte index 3 float textureCoord[] = { 0.0f,0.0f, 0.25f,0.0f, 0.0f,0.20f, 0.25f,0.20f }; byte indices[] = {0, 1, 2, 1, 2, 3 }; ByteBuffer byteBuffer = ByteBuffer.allocateDirect(4*2 * 4); // 4 vertices, 2 co-ordinates(x,y) 4 for converting in float byteBuffer.order(ByteOrder.nativeOrder()); fVertexBuffer = byteBuffer.asFloatBuffer(); fVertexBuffer.put(vertices); fVertexBuffer.position(0); ByteBuffer byteBuffer2 = ByteBuffer.allocateDirect(textureCoord.length * 4); byteBuffer2.order(ByteOrder.nativeOrder()); mTextureBuffer = byteBuffer2.asFloatBuffer(); mTextureBuffer.put(textureCoord); mTextureBuffer.position(0); } public void draw(GL10 gl){ gl.glFrontFace(GL11.GL_CW); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(1,GL10.GL_FLOAT, 0, fVertexBuffer); gl.glEnable(GL10.GL_TEXTURE_2D); if(MyRender.flag2==1){ /** Collision has taken place*/ int idx = oldIdx==(numberSprites-1) ? (numberSprites-1) : (int)((System.currentTimeMillis()%(200*numberSprites))/200); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glTranslatef((idx%columnInt)/columnFloat, (idx/columnInt)/rowFloat, 0); gl.glMatrixMode(GL10.GL_MODELVIEW); oldIdx = idx; } gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); //4 gl.glTexCoordPointer(2, GL10.GL_FLOAT,0, mTextureBuffer); //5 gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); //7 gl.glFrontFace(GL11.GL_CCW); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_MODELVIEW); } public void loadFragileTexture(GL10 gl, Context context, int resource) { Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), resource); gl.glGenTextures(1, textures, 0); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); bitmap.recycle(); }

Read the article

SQL SERVER – Partition Parallelism Support in expressor 3.6

- by pinaldave

I am very excited to learn that there is a new version of expressor’s data integration platform coming out in March of this year. It will be version 3.6, and I look forward to using it and telling everyone about it. Let me describe a little bit more about what will be so great in expressor 3.6: Greatly enhanced user interface Parallel Processing Bulk Artifact Upgrading The User Interface First let me cover the most obvious enhancements. The expressor Studio user interface (UI) has had some significant work done. Kudos to the expressor Engineering team; the entire UI is a visual masterpiece that is very responsive and intuitive. The improvements are more than just eye candy; they provide significant productivity gains when developing expressor Dataflows. Operator shape icons now include a description that identifies the function of each operator, instead of having to guess at the function by the icon. Operator shapes and highlighting depict the current function and status: Disabled, enabled, complete, incomplete, and error. Each status displays an appropriate message in the message panel with correction suggestions. Floating or docking property panels provide descriptive tool tips for each property as well as auto resize when adjusting the canvas, without having to search Help or the need to scroll around to get access to the property. Progress and status indicators let you know when an operation is working. “No limit” canvas with snap-to-grid allows automatic sizing and accurate positioning when you have numerous operators in the Dataflow. The inline tool bar offers quick access to pan, zoom, fit and overview functions. Selecting multiple artifacts with a right click context allows you to easily manage your workspace more efficiently. Partitioning and Parallel Processing Partitioning allows each operator to process multiple subsets of records in parallel as opposed to processing all records that flow through that operator in a single sequential set. This capability allows the user to configure the expressor Dataflow to run in a way that most efficiently utilizes the resources of the hardware where the Dataflow is running. Partitions can exist in most individual operators. Using partitions increases the speed of an expressor data integration application, therefore improving performance and load times. With the expressor 3.6 Enterprise Edition, expressor simplifies enabling parallel processing by adding intuitive partition settings that are easy to configure. Bulk Artifact Upgrading Bulk Artifact Upgrading sounds a bit intimidating, but it actually is not and it is a welcome addition to expressor Studio. In past releases, users were prompted to confirm that they wanted to upgrade their individual artifacts only when opened. This was a cumbersome and repetitive process. Now with bulk artifact upgrading, a user can easily select what artifact or group of artifacts to upgrade all at once. As you can see, there are many new features and upgrade options that will prove to make expressor Studio quicker and more efficient. I hope I’m not the only one who is excited about all these new upgrades, and that I you try expressor and share your experience with me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

Strange Happenings

- by MOSSLover

There are weeks we go about our life thinking nothing is going to change nothing will happen. Then there are other weeks a billion things happen at once. Friday started off very weird for me. I flew into Atlanta and I met some cool people for another SharePoint event. I had some good conversations. Saturday then hit me and my virtual machine bombed in my presentation after the auto updater ran. I was writing code on the board and describing everything in notepad. I would say as presentations go it was the best and the worst presentation all wrapped into one. The next day I was in Baltimore and I hung out with my aunt which was relatively uneventful and great. Then Monday hit and half my presentations failed or succeeded and my screen freezes so I start describing the code. I was on top of my game until Monday night. On top of the world. I'm exhausted I get into Raleigh and one of the craziest stories of my life happens. So my boss has been renting cars through Priceline this week I got a different company than the other weeks. The company gives me a Ford Focus and I plug in the coordinates on my IPhone where I want go. I head out and then I get to the destination hotel (or I thought I did). I go inside it's the wrong hotel the other one is a few miles away. I walk outside hop into the car and it sounds like a gunshot. Nothing is starting...Am I doing something wrong? No I'm not the car is completely dead in the water. I call the rental car facility and they tell me to call roadside they are closing for the night. Roadside says they can't give me a new car but they can get me a jump then I have to take it up with the facility. They send me a tow truck to give me a jump the guy can't jump the car. He tells me this vehicle was towed about an hour ago. He shows me a copy of a slip from when he towed it. We also notice the rental car company left one of there price scanning guns in the vehicle. I call up roadside and now they are interested in getting me a car because I need to be onsite tomorrow. They get the manager of the facility on the phone he apologizes profusely and he says he'll be there in 10 minutes. About 30 minutes pass and him plus another dude show up with a Ford Escape leather interior. At this point I hand him the gun tell him someone left it in the vehicle and that I'm not so happy with them. I ask them to comp my rental they can't due to Priceline, however if I call him again this week he can get me a voucher. It's about 2 am and I'm ready to get to the hotel I don't make it in the next morning until 10 am. I would say this was a crazy week all forms of technology are trying to tell me something. What I have no idea, but we'll see the outcome soon. I feel so weird tons of change is about to happen. I don't know if it's good or bad. I think this week is some form of omen.

Read the article

5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

- by kbargais_LV

I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

Read the article

Why you shouldn't add methods to interfaces in APIs

- by Simon Cooper

It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

Read the article

Slow Ubuntu 10.04 after long time unused

- by Winston Ewert

I'm at spring break so I'm back at my parent's house. I've turned my computer on which has been off since January and its unusably slow. This was not the case when I last used the computer in January. It is running 10.04, Memory: 875.5 MB CPU: AMD Athlon 64 X2 Dual Core Processor 4400+ Available Disk Space: 330.8 GB I'm not seeing a large usage of either memory or Disk I/O. If I look at my list of processes there is only a very small amount of CPU usage. However, if I hover over the CPU usage graph that I've on the top bar, I sometimes get really high readings like 100%. It took a long time to boot, to open firefox, to open a link in firefox. As far as I can tell everything that the computer tries to do is just massively slow. Right now, I'm apt-get dist-upgrading to install any updates that I will have missed since last time this computer was on. Any ideas as to what is going on here? UPDATE: I thought to check dmesg and it has a lot of entries like this: [ 1870.142201] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1870.142206] ata3.00: irq_stat 0x40000008 [ 1870.142210] ata3.00: failed command: READ FPDMA QUEUED [ 1870.142217] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1870.142218] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1870.142221] ata3.00: status: { DRDY ERR } [ 1870.142223] ata3.00: error: { UNC } [ 1870.143981] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146758] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146761] ata3.00: configured for UDMA/133 [ 1870.146777] ata3: EH complete [ 1872.092269] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1872.092274] ata3.00: irq_stat 0x40000008 [ 1872.092278] ata3.00: failed command: READ FPDMA QUEUED [ 1872.092285] ata3.00: cmd 60/08:00:c0:4a:65/00:00:03:00:00/40 tag 0 ncq 4096 in [ 1872.092287] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1872.092289] ata3.00: status: { DRDY ERR } [ 1872.092292] ata3.00: error: { UNC } [ 1872.094050] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096795] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096798] ata3.00: configured for UDMA/133 [ 1872.096814] ata3: EH complete [ 1874.042279] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1874.042285] ata3.00: irq_stat 0x40000008 [ 1874.042289] ata3.00: failed command: READ FPDMA QUEUED [ 1874.042296] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1874.042297] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1874.042300] ata3.00: status: { DRDY ERR } [ 1874.042302] ata3.00: error: { UNC } [ 1874.044048] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046837] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046840] ata3.00: configured for UDMA/133 [ 1874.046861] sd 2:0:0:0: [sda] Unhandled sense code [ 1874.046863] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1874.046867] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1874.046872] Descriptor sense data with sense descriptors (in hex): [ 1874.046874] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1874.046883] 03 65 4a c5 [ 1874.046886] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1874.046892] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 65 4a c0 00 00 08 00 [ 1874.046900] end_request: I/O error, dev sda, sector 56969925 [ 1874.046920] ata3: EH complete I'm not certain, but that looks like my problem may be a failing hard drive. But the drive is less then a year old, it really shouldn't be failing now...

Read the article

SOA Community Newsletter May 2014

- by JuergenKress

Registration for the Fusion Middleware Summer Camps 2014 is open – Register asap for one of our bootcamps August 4th – 8th 2014 in Lisbon. Please read details and pre-requisitions careful before you register. We expect that like in the past, the conference will be booked out soon! If you can’t make it to Lisbon attend our SOA Suite 11c free on-demand Bootcamp or Managing the Complexity of IoT online trainings. With more than 5000 customers, SOA Suite Achieves Significant Customer Adoption and Industry Recognition.Thanks to all our SOA Specialized partners for making our joins SOA customers successful! As a summary of the Industrial SOA series we published the Podcast Show Notes: SOA and Cloud - Where's This Relationship Going? Make sure you use the Oracle Demo Systems for your customer presentations. The demo systems are hosted by Oracle and include complete scenarios based on the latest Middleware version like the new B2B SOA Suite Demo System! For local presentations without fast internet use the SOA/BPM 11.1.1.7.1 Virtual Machine and Case Management Sample. At our SOA Community Workspace (SOA Community membership required) you can get new IoT presentations for Location Based Offers for Banking & Whitepaper and online Webcast & Utility presentation. In this newsletter you will find many articles about OSB: OSB 11g – A Hands-on Tutorial & Using Split-Joins in OSB Services for parallel processing of messages & OSB, Service Callouts and OQL & Working with Oracle Security Token Service. Thanks for sharing all the additional SOA articles within the community: How to configure Oracle SOA/BPM task auto release & Controlling BPEL process flow at runtime & Upgrading to Oracle SOA Suite 11g PS6 (11.1.1.7)? Do this. & BPEL and BPM's performance monitoring using DMS & SOA 11g - Create RESTful Service In Oracle SOA & Wrong timezone causes TopLink warning in SOA suite. Highlight of the BPM and ACM section is the IDC BPM vendor report. The new bundle Patch including the ACM UI is now available. If you want to learn more about ACM, get the ACM training material at our SOA Community Workspace (SOA Community membership required). A great demo for your next BPM presentation is the BPM iPad app. It’s simpleMobile BPM is Not An Option. It’s a Necessity. Thanks for sharing all the additional BPM articles within the community: BPM update adds Case Management Web Interface and REST APIs & Implementing deadline functionality with Oracle Adaptive Case Management & BPM 11g Timeout Heuristics & Humantask Assignment: Names and Expressions Assignment via Rules. In our last section Architecture, it is all about design. Usability is a key factor for customer satisfaction, worth to spend some time and read the Simplified User Experience Design Patterns eBook. Great blueprint for your project! See you in Lisbon! To read the newsletter please visit www.tinyurl.com/soaNewsMay2014 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: newsletter,SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress

Read the article

Launching Ops Center 12c

- by user12601629

Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo. I thought that sounded like a fine idea! You see, I have always loved Japan. I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year. It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming. If you've never been in Japan for cherry blossom season, it's a must see! Here are a couple of pics for you. Here is a picture from Roppongi, near the conference. Here's a picture near the Imperial Palace. A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address. It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products. It was a packed house for the keynote. Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean? It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86. Now you can build clouds of Solaris Zones with ease! Second, we've much more deeply integrated high-end storage and network management into the cloud layers. These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11. That would have been easy, but also boring! We support S11 deeply. Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework. If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems. These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage. We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components. The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner. It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas. Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

Read the article

Silverlight Cream for January 15, 2011 -- #1028

- by Dave Campbell

Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

NetworkManager Applet shows no networks

- by Kkelk

I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

Read the article

Enable grub boot menu on new system

- by Remus Rigo

I have installed Ubuntu 11.04 and I would like to see the boot menu when the system starts (by default it is hidden or the timeout=0) # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 insmod jpeg if background_image /boot/grub/boot.jpg; then true else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

Read the article

Why I Love the Social Management Platform I Use

- by Mike Stiles

Not long ago, I asked the product heads for the various components of the Oracle Social Cloud’s SRM to say what they thought was coolest about their component. And while they did a fine job, it was recently pointed out to me that no one around here uses the platform in a real-world setting more than I do, as I not only blog and podcast my brains out, I also run Oracle Social’s own social properties. Of course I’m pro-Oracle Social’s product. Duh. But if you can get around immediately writing this off as a puff piece, there are real reasons beyond my employment that the Oracle SRM works for me as a community manager. If it didn’t, I could have simply written about something else, like how people love smartphones or something genius like that. Post Grid I like seeing what I want to see. I’m difficult that way. Post grid lets me see all posts for all channels, with custom columns showing me how posts are doing. I can filter the grid by social channel, published, scheduled, draft, suggested, etc. Then there’s a pullout side panel that shows me post details, including engagement analytics. From the pullout, I can preview the post, do a quick edit, a full edit, or (my favorite) copy a post so I can edit it and schedule it for other times so I don’t have to repeat from scratch. I’m not lazy, just time conscious. The Post Creation Environment Given our post volume, I need this to be as easy as it can be. I can highlight which streams I want the post to go out on, edit for the individual streams, maintain a media library that’s easy to upload to and attach from, tag posts, insert links that auto-shorten to an orac.le shortlink, schedule with a nice calendar visual, geo-target, drop photos inline into Twitter, and review each post. Watching My Channels The Engage component of the Oracle SRM brings in and drops into a grid the activity that’s happening on all my channels. I keep this open round-the-clock. Again, I get to see only what I want; social network, stream, unread messages, engagement by how I labeled them, and date range. I can bring up a post with a click, reply, label it, retweet it, assign it, delete it, archive it, etc. So don’t bother trying to be a troll on my channels. Analytics Social publishing and engaging 24/7 would be pretty unrewarding if I couldn’t see how our audience was responding. Frankly, I get more analytics than I know what to do with (I’m a content creator, not a data analyst). But I do know what numbers I care about, and they’re available by channel, date range, and campaigns. I’m seeing fan count, sources and demographics. I’m seeing engagement, what kinds of posts are getting engagement, and top engagers. I’m seeing my reach, both organic and paid. I’m seeing how individual posts performed in terms of engagement and virality, and posting time/date insight. Have I covered all the value propositions? I’ve covered pathetically few of them. It would be impossible in blog length to give shout-outs to the vast number of features and functionalities. From organizing teams and managing permissions with Workflow to the powerful ability to monitor topics (and your competition) across the web in Listen, it’s a major, and increasingly necessary, weapon in your social marketing arsenal. The life of a Community Manager is not for everybody. So if the Oracle SRM can actually make a Community Manager’s life easier, what’s not to love? I invite you to take a look at and participate in our Oracle Social Cloud social channels! Facebook Twitter YouTube Google Plus LinkedIn Daily Podcast on iHeartRadio @mikestiles @oraclesocial Photo: freeimages.com

Read the article

Very slow KVM in Ubuntu 12.04

- by Guy Fawkes

I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml  <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

Read the article

your AdSense account poses a risk of generating invalid activity

- by Karington

i received a mail from the adsense team saying: I am not an adsense expert, im actually quite new to it. I spent a lot of time on my site http://www.media1.rs, its a news aggregator with tons of options. In the meantime i discovered the double click service that had a good option to turn on google ads when you don't have any other running so i joined up for google adsense with my company account. Everything went smooth until one day (21.Jul.2011) i got an email... Hello, After reviewing our records, we've determined that your AdSense account poses a risk of generating invalid activity. Because we have a responsibility to protect our AdWords advertisers from inflated costs due to invalid activity, we've found it necessary to disable your AdSense account. Your outstanding balance and Google's share of the revenue will both be fully refunded back to the affected advertisers. Please understand that we need to take such steps to maintain the effectiveness of Google's advertising system, particularly the advertiser-publisher relationship. We understand the inconvenience that this may cause you, and we thank you in advance for your understanding and cooperation. If you have any questions or concerns about the actions we've taken, how you can appeal this decision, or invalid activity in general, you can find more information by visiting http://www.google.com/adsense/support/bin/answer.py?answer=57153. Sincerely, The Google AdSense Team At first i didn't have any idea why... but then it came to me that it was maybe the auto refresh script we had because we publish news very very often and it would be useful for visitors... but i removed it immediately after i got the mail... Then i thought it might be my friends clicking thinking that that will help me (i didn't tell them to do it and don't know if they did) or something like that but than it couldn't be that because everyone can organize 10 people and get anyone who is a start-up banned? right? Anyway i filled out the form that was on the answers page with the previously removed script and got this from them: Hello, Thank you for your appeal. We appreciate the additional information you've provided, as well as your continued interest in the AdSense program. However, after thoroughly re-reviewing your account data and taking your feedback into consideration, our specialists have confirmed that we're unable to reinstate your AdSense account. As a reminder, if you have any questions or concerns about your account, the actions we've taken, or invalid activity in general, you can find more information by visiting http://www.google.com/adsense/support/bin/answer.py?answer=57153. I do understand them that they have to keep things secret in a way but i don't know what I'm supposed to do now? Is there a check list that i can go through and re-apply? Where do i re-apply on the same form? Please help as we are a small company and cant really have a budget for hiring a specialist + don't know any also... p.s. the current ads on the site are my own through doubleclick... Thanks in advance! Best, Karington

Read the article

Why are you doing this? [closed]

- by NIcholas Lawson

I am working on a story that I am going to be querying to several magazines in my hometown about this work that is being done by the AXR group. This is a group of people who have networked online and are working on developing a higher level syntax structure than CSS and HTML currently offer. I am covering this is as a story because I see potential in this as a human interest story in cosmopolitan society. I have been asked by the group to pose this question to you and would appreciate any and all comments you would have on the following ... To AXR: So when does the internet become finished? At what point does a computer scientist say to himself ... my job here is finished ... the internet is complete? When is the internet ready to be more about the display of content than the uploading of new websites or computer tech? You are embarking on upon a sixty year project every day you work with this internet, what drives you? Why are you spending your hard earned hours working on the code to this computer? I spend thirty hours a week online because I love the writing and I know what would make the internet better ... ease of use ... i know it is difficult to program but I see some very elegant solutions online ... in this early inception phase of your programming development for this HSS prototype ... I would like to know why I do not see you programmers asking questions such as ... What would make the end user's life the easiest when using this code? I know you can solve the problem but an evolution forward would be simple, not simple to a computer scientist but simple to use for a career janitor ... if you could solve the problem of alleviating the stress at using a the computer you could get better content out of the computer ... right now the main problem is that the best content is in the hands of the people least likely to use the computer and the more simple you make the computer to use ... the better the content collection will be in the long run ... That is not what I want to talk about though ... why are you writing code when you could be writing stories? I know the computer is worthless without content so I build content, I know the book is worthless without the combinations of words in them, i know the television is worthless without the television news anchor or the actor, what I want to know from you folks in a very journalistic sense is why are you even bothering to bother to write code for a machine that has only made our lives i would dare say less interesting. why are you feeding the beast your time when you could be writing stories or being an actor or musician or auto mechanic ... why code? why this machine? what do you love about it? what do you hate about it? what do you wonder about it? I want to know so that starting out I know how to further shape my questions with axr ... i want the full story ... i want the real answers ... and i want to know why you are doing this, it would make for great writing if you could elucidate on this point.

Read the article

Oracle Solaris Crash Analysis Tool 5.3 now available

- by user12609056

Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3. This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

Read the article

Why Is Hibernation Still Used?

- by Jason Fitzpatrick

With the increased prevalence of fast solid-state hard drives, why do we still have system hibernation? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Moses wants to know why he should use hibernate on a desktop machine: I’ve never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I’ve never truly understood why it’s used. With today’s technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me [on desktop computers] when modern technology is considered, but perhaps there are applications that I’m not considering. What was the original purpose behind hibernation, and why do people still use it? Quite a few people use hibernate, so what is Moses missing in the big picture? The Answer SuperUser contributor Vignesh4304 writes: Normally hibernate mode saves your computer’s memory, this includes for example open documents and running applications, to your hard disk and shuts down the computer, it uses zero power. Once the computer is powered back on, it will resume everything where you left off. You can use this mode if you won’t be using the laptop/desktop for an extended period of time, and you don’t want to close your documents. Simple Usage And Purpose: Save electric power and resuming of documents. In simple terms this comment serves nice e.g (i.e. you will sleep but your memories are still present). Why it’s used: Let me describe one sample scenario. Imagine your battery is low on power in your laptop, and you are working on important projects on your machine. You can switch to hibernate mode – it will result your documents being saved, and when you power on, the actual state of application gets restored. Its main usage is like an emergency shutdown with an auto-resume of your documents. MagicAndre1981 highlights the reason we use hibernate everyday: Because it saves the status of all running programs. I leave all my programs open and can resume working the next day very easily. Doing a real boot would require to start all programs again, load all the same files into those programs, get to the same place that I was at before, and put all my windows in exactly the same place. Hibernating saves a lot of work pulling these things back up again. It’s not unusual to find computers around the office here that have been hibernated day in and day out for months without an actual full system shutdown and restart. It’s enormously convenient to freeze your work space at the exact moment you stopped working and to turn right around and resume there the next morning. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

Read the article

The Raspberry Pi JavaFX In-Car System (Part 3)

- by speakjava

Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply. All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A). My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area. This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327. Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did. I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication. Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID. The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327". To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file. After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static address 10.0.0.13 gateway 10.0.0.254 netmask 255.255.255.0 iface wlan0 inet static address 192.168.0.1 netmask 255.255.255.0 wireless-essid Wifi327 wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct. However, ifconfig showed no assigned IP address. If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327. I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted. Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d. All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi. Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

Read the article

Reducing Deadlocks - not a DBA issue ?

- by steveh99999

As a DBA, I'm involved on an almost daily basis troubleshooting 'SQL Server' performance issues. Often, this troubleshooting soon veers away from a 'its a SQL Server issue' to instead become a wider application/database design/coding issue.One common perception with SQL Server is that deadlocking is an application design issue - and is fixed by recoding... I see this reinforced by MCP-type questions/scenarios where the answer to prevent deadlocking is simply to change the order in code in which tables are accessed....Whilst this is correct, I do think this has led to a situation where many 'operational' or 'production support' DBAs, when faced with a deadlock, are happy to throw the issue over to developers without analysing the issue further....A couple of 'war stories' on deadlocks which I think are interesting :- Case One , I had an issue recently on a third-party application that I support on SQL 2008. This particular third-party application has an unusual support agreement where the customer is allowed to change the index design on the third-party provided database. However, we are not allowed to alter application code or modify table structure..This third-party application is also known to encounter occasional deadlocks – indeed, I have documentation from the vendor that up to 50 deadlocks per day is not unusual !So, as a DBA I have to support an application which in my opinion has too many deadlocks - but, I cannot influence the design of the tables or stored procedures for the application. This should be the classic - blame the third-party developers scenario, and hope this issue gets addressed in a future application release - ie we could wait years for this to be resolved and implemented in our production environment...But, as DBAs can change the index layout, is there anything I could do still to reduce the deadlocks in the application ?I initially used SQL traceflag 1222 to write deadlock detection output to the SQL Errorlog – using this I was able to identify one table heavily involved in the deadlocks.When I examined the table definition, I was surprised to see it was a heap – ie no clustered index existed on the table.Using SQL profiler to see locking behaviour and plan for the query involved in the deadlock, I was able to confirm a table scan was being performed.By creating an appropriate clustered index - it was possible to produce a more efficient plan and locking behaviour.So, less locks, held for less time = less possibility of deadlocks. I'm still unhappy about the overall number of deadlocks on this system - but that's something to be discussed further with the vendor.Case Two, a system which hadn't changed for months suddenly started seeing deadlocks on a regular basis. I love the 'nothing's changed' scenario, as it gives me the opportunity to appear wise and say 'nothings changed on this system, except the data'.. This particular deadlock occurred on a table which had been growing rapidly. By using DBCC SHOW_STATISTICS - the DBA team were able to see that the deadlocks seemed to be occurring shortly after auto-update stats had regenerated the table statistics using it's default sampling behaviour.As a quick fix, we were able to schedule a nightly UPDATE STATISTICS WITH FULLSCAN on the table involved in the deadlock - thus, greatly reducing the potential for stats to be updated via auto_update_stats, consequently reducing the potential for a bad plan to be generated based on an unrepresentative sample of the data. This reduced the possibility of a deadlock occurring. Not a perfect solution by any means, but quick, easy to implement, and needed no application code changes. This fix gave us some 'breathing space' to properly fix the code during the next scheduled application release. The moral of this post - don't dismiss deadlocks as issues that can only be fixed by developers...

Read the article

Where should you put constants and why?

- by Tim Meyer

In our mostly large applications, we usually have a only few locations for constants: One class for GUI and internal contstants (Tab Page titles, Group Box titles, calculation factors, enumerations) One class for database tables and columns (this part is generated code) plus readable names for them (manually assigned) One class for application messages (logging, message boxes etc) The constants are usually separated into different structs in those classes. In our C++ applications, the constants are only defined in the .h file and the values are assigned in the .cpp file. One of the advantages is that all strings etc are in one central place and everybody knows where to find them when something must be changed. This is especially something project managers seem to like as people come and go and this way everybody can change such trivial things without having to dig into the application's structure. Also, you can easily change the title of similar Group Boxes / Tab Pages etc at once. Another aspect is that you can just print that class and give it to a non-programmer who can check if the captions are intuitive, and if messages to the user are too detailed or too confusing etc. However, I see certain disadvantages: Every single class is tightly coupled to the constants classes Adding/Removing/Renaming/Moving a constant requires recompilation of at least 90% of the application (Note: Changing the value doesn't, at least for C++). In one of our C++ projects with 1500 classes, this means around 7 minutes of compilation time (using precompiled headers; without them it's around 50 minutes) plus around 10 minutes of linking against certain static libraries. Building a speed optimized release through the Visual Studio Compiler takes up to 3 hours. I don't know if the huge amount of class relations is the source but it might as well be. You get driven into temporarily hard-coding strings straight into code because you want to test something very quickly and don't want to wait 15 minutes just for that test (and probably every subsequent one). Everybody knows what happens to the "I will fix that later"-thoughts. Reusing a class in another project isn't always that easy (mainly due to other tight couplings, but the constants handling doesn't make it easier.) Where would you store constants like that? Also what arguments would you bring in order to convince your project manager that there are better concepts which also comply with the advantages listed above? Feel free to give a C++-specific or independent answer. PS: I know this question is kind of subjective but I honestly don't know of any better place than this site for this kind of question. Update on this project I have news on the compile time thing: Following Caleb's and gbjbaanb's posts, I split my constants file into several other files when I had time. I also eventually split my project into several libraries which was now possible much easier. Compiling this in release mode showed that the auto-generated file which contains the database definitions (table, column names and more - more than 8000 symbols) and builds up certain hashes caused the huge compile times in release mode. Deactivating MSVC's optimizer for the library which contains the DB constants now allowed us to reduce the total compile time of your Project (several applications) in release mode from up to 8 hours to less than one hour! We have yet to find out why MSVC has such a hard time optimizing these files, but for now this change relieves a lot of pressure as we no longer have to rely on nightly builds only. That fact - and other benefits, such as less tight coupling, better reuseability etc - also showed that spending time splitting up the "constants" wasn't such a bad idea after all ;-)

Read the article

Easy Made Easier - Networking

- by dragonfly

In my last post, I highlighted the feature of the Appliance Manager Configurator to auto-fill some fields based on previous field values, including host names based on System Name and sequential IP addresses from the first IP address entered. This can make configuration a little faster and a little less subject to data entry errors, particularly if you are doing the configuration on the Oracle Database Appliance itself. The Oracle Database Appliance Appliance Manager Configurator is available for download here. But why would you download it, if it comes pre-installed on the Oracle Database Appliance? A common reason for customers interested in this new Engineered System is to get a good idea of how easy it is to configure. Beyond that, you can save the resulting configuration as a file, and use it on an Oracle Database Appliance. This allows you to verify the data entered in advance, and in the comfort of your office. In addition, the topic of this post is another strong reason to download and use the Appliance Manager Configurator prior to deploying your Oracle Database Appliance. The most common source of hiccups in deploying an Oracle Database Appliance, based on my experiences with a variety of customers, involves the network configuration. It is during Step 11, when network validation occurs, that these come to light, which is almost half way through the 24 total steps, and can be frustrating, whether it was a typo, DNS mis-configuration or IP address already in use. This is why I recommend as a best practice taking advantage of the Appliance Manager Configurator prior to deploying an Oracle Database Appliance. Why? Not only do you get the benefit of being able to double check your entries before you even start on the Oracle Database Appliance, you can also take advantage of the Network Validation step. This is the final step before you review all the data and can save it to a text file. It can be skipped, if you aren't ready or are not connected to the network that the Oracle Database Appliance will be on. My recommendation, though, is to run the Appliance Manager Configurator on your laptop, enter the data or re-load a previously saved file of the data, and then connect to the network that the Oracle Database Appliance will be on. Now run the Network Validation. It will check to make sure that the host names you entered are in DNS and do resolve to the IP addresses you specifiied. It will also ping the IP Addresses you specified, so that you can verify that no other machine is already using them (yes, that has happened at customer sites). After you have completed the validation, as seen in the screen shot below, you can review the results and move on to saving your settings to a file for use on your Oracle Database Appliance, or if there are errors, you can use the Back button to return to the appropriate screen and correct the data. Once you are satisfied with the Network Validation, just check the Skip/Ignore Network Validation checkbox at the top of the screen, then click Next. Is the Network Validation in the Appliance Manager Configurator required? No, but it can save you time later. I should also note that the Network Validation screen is not part of the Appliance Manager Configurator that currently ships on the Oracle Database Appliance, so this is the easiest way to verify your network configuration. I hope you are finding this series of posts useful. My next post will cover some aspects of the windowing environment that gets run by the 'startx' command on the Oracle Database Appliance, since this is needed to run the Appliance Manager Configurator via a direct connected monitor, keyboard and mouse, or via the ILOM. If it's been a while since you've used an OpenWindows environment, you'll want to check it out.

Search Results

Search found 7131 results on 286 pages for 'auto dimmer'.

Page 214/286 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221 | Next Page >

- by Daniel Moth

- by Asian Angel

- by Chris Lee

- by Jeff Taylor-Oracle

- by Sid

- by pinaldave

- by MOSSLover

- by kbargais_LV

- by Simon Cooper

- by Winston Ewert

- by JuergenKress

- by user12601629

- by Dave Campbell

- by Kkelk

- by Remus Rigo

- by Mike Stiles

- by Guy Fawkes

- by Karington

- by NIcholas Lawson

- by user12609056

- by Jason Fitzpatrick

- by speakjava

- by steveh99999

- by Tim Meyer

- by dragonfly

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221 | Next Page >