Search Results

Search found 6463 results on 259 pages for 'flash cs6'.

Page 214/259 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• HTML5 video capture and streaming?

  - by Shyatic

  I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

  Read the article

• Simple NAS setup for Ubuntu

  - by Sean Houlihane

  So, I want to connect my shiny new NAS (QNAP TS-210p II) to my Ubuntu 11.10 box. I have a 2nd Ubuntu machine, but I don't use that enough to be too worried about it. Use is ideally to offload all storage except for system (which can then run off a 30GB flash drive). The main machine also runs Myth front/backends. Both are on a wired network currently. I have got a basic setup working, mounted over NFS, but have some issues, and whenever I look for answers, I seem to get unto the UbuntuServer domain, with what seems like more detail than I want in an answer. Questions I have identified so far: 1) Sharing UIDs to get file permissions correct. LDAP or something else? What is necessary to make this work? 2) Mounting an NFS device reliably. Do I just add it in fstab or is some sort of auto-mount advisable? Its a wired network, but I shouldn't need to worry about reboot after power-outages and sequencing...

  Read the article

• Find meeting point of 2 objects in 2D, knowing (constant) speed and slope

  - by Axonn

  I have a gun which fires a projectile which has to hit an enemy. The problem is that the gun has to be automatic, i.e. - choose the angle in which it has to shoot so that the projectile hits the enemy dead in the center. It's been a looooong time since school, and my physics skills are a bit rusty, but they're there. I've been thinking to somehow apply the v = d/t formula to find the time needed for the projectile or enemy to reach a certain point. But the problem is that I can't find the common point for both the projectile and enemy. Yes, I can find a certain point for the projectile, and another for the enemy, but I would need lots of tries to find where the point coincides, which is stupid. There has to be a way to link them together but I can't figure it out. I prepared some drawings and samples: A simple version of my Flash game, dumbed down to the basics, just some shapes: http://axonnsd.org/W/P001/MathSandBox.swf - click the mouse anywhere to fire a projectile. Or, here is an image which describes my problem: So... who has any ideas about how to find x3/y3 - thus leading me to find the angle in which the weapon has to tilt in order to fire a projectile to meet the enemy? EDIT I think it would be clearer if I also mention that I know: the speed of both Enemy and Projectile and the Enemy travels on a straight vertical line.

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• CodePlex Daily Summary for Tuesday, November 12, 2013

  CodePlex Daily Summary for Tuesday, November 12, 2013Popular ReleasesExport Version History Of SharePoint 2010 List Items to Microsoft Excel.: ExportVersionHistory_R9: Fix for "&" in List TitleSharePoint Client Browser for SharePoint 2010 and 2013: SharePoint 2013 Client Browser v1.1: SharePoint 2013 Client Browser v1.1, released: 11/12/2013 - Added splash screen on startup for better user experience - Added support for Taxonomy (Term Store, Group, Term Set and Terms) - Added limited support for User Profiles, only showing current user profile - Fixed columns issue with Raw Data tab (clearing columns)sb0t v.5: sb0t 5.16 r2: Fixed PM blocking bug. Allow room scribbles by supported clients. Link user list bug hopefully fixed. Ignore scribbles for ignored users. Fixed additional PM bug.NuGet: NuGet 2.7.2: 2.7.2 releaseDomain Oriented N-Layered .NET 4.5: AutoNLayered v1.1.1: - MVC 5 - Entity Framework 6 (Asynchronous architecture - TAP) - Improvements in services, repository, uow...Paint.NET PSD Plugin: 2.4.0: PSDPlugin version 2.4.0 requires Paint.NET 3.5.11. Changes: Multichannel images can now be loaded, with each channel showing up as a separate grayscale layer. More reliable loading of files with layer groups created in Photoshop CS5 and CS6. Faster loading of PSD files. Speed improvement of 1.1x to 1.5x on 8-bit images, and about 15% on 32-bit RGB images. More efficient RLE compression, with file sizes reduced by about 4% on average. The PsdFile class can now load and save most PSD...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.3.3: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Magick.NET: Magick.NET 6.8.7.501: Magick.NET linked with ImageMagick 6.8.7.5. Breaking changes: - Refactored MagickImageStatistics to prepare for upcoming changes in ImageMagick 7. - Renamed MagickImage.SetOption to SetDefine.Media Companion: Media Companion MC3.587b: Fixed* TV - Locked shows display correctly after refresh * TV - missing episodes display in correct colour for missed or to be aired * TV - Rescrape of Multi-episodes working. * TV - Cache fix where was writing episodes multiple times * TV - Fixed Cache writing missing episodes when Display missing eps was disabled. Revision HistoryGenerate report of user mailbox size for Exchange 2010: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Generate-report-of-user-e4e9afcaCheck SQL Server a specified database index fragmentation percentage (SQL): Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Check-SQL-Server-a-a5758043Save attachments from multiple selected items in Outlook (VBA): Script Download: Script Download: http://gallery.technet.microsoft.com/scriptcenter/Save-attachments-from-5b6bf54bRemove Windows Store apps in Windows 8: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Remove-Windows-Store-Apps-a00ef4a4PCSX-Reloaded: 1.9.94: General changes:Support for compressed audio in cue files. ECM support. OS X changes:32-bit support has been dropped Partial French and Hungarian translationsVidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word documents directly from your own desktop and folders into page content Allow you to install Composite For...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.New Projectsasmhighlighter fork for Visual Studio 2013: asmhighlighter fork for Visual Studio 2013 Added more customizable colors in Visual Studio 2013->Options->Font and colors Centrafuse Plugin for Mapfactor Navigator: This Centrafuse plugin embeds Mapfactor Navigator as a window into Centrafuse and integrates it as the Navigation Engine.Coded UI Hybrid Test Automation Framework: A blueprint of a Hybrid Coded UI Test Automation Framework which aims to eliminate hardships and increase its adoption across various organizations.Excel add-in for Generalized Jarrow-Rudd option pricing: Excel add-in to call fmsgjr code.FindFileTool: This is the program file has been released Lotte search toolFJYC_PLAN(new): PLANGeneralized Jarrow-Rudd Option Pricing: Perturb cumulants of normal distributions instead of lognormal.Hawk LAN Messenger: My First LAN Messenger Project............ Hydration Kit for App-V 5 Sequencing: This kit builds automated installers for Microsoft Application Virtualization (App-V) 5.0 sequencing environments.MDCC Taxi: Overwrite of the scheduled and ordeder taxis to drive employees of Microsoft Development Centre Copenhagen to the local train in SkodsborgMeetSomeNearbyStranger: This project represents a web service for an android application with the same name.MsgBox: This project contains a message box service locator implementation implemented in C# and WPF.SuperSocket FTP Server: A pure C# FTP Server base on SuperSocketxRM Import-Export Solution Manager for Microsoft Dynamics CRM: This tool provides the ability to automatise the Import-Export of Solutions in Microsoft Dynamics CRM 2011 and 2013, also generating a powershell outcome

  Read the article

• How to view/mount other partitions on your hard drive

  - by Preston Zacharias

  Recently I have installed Ubuntu 12.04 Beta 2 on a USB flash drive and decided to install it on an old external HDD which I have taken out of the casing and succesfully mounted in my desktop computer. There is no other operating system besides the newly install Ubuntu. However, there is about 500gb of data on the drive. This is why i used a partitioning software on my windows 7 netbook to partition the hard drive to set aside 1tb for files, 350gb of space for linux and the remaining 650gb for Vista which i plan on installing soon. But this is where the problem sets in...when installing Ubuntu it does not recognize that the drive is partitioned at all, it's just one big open block of space...so I used the installers built in partitioning feature to set aside 300gb for main Ubuntu install and 50gb for swap space. I set both of these partitions to be created at the "end" so that it wouldn't delete or write over my data. And this is where i am really lost; when booting into Ubuntu i am able to use it perfectly fine, got on internet, etc...but i have NO CLUE as to how i can view files that were previously on the drive (all of my data that i had prior to install). How can I mount/be able to view the other partition so that i can have access to my data? Thank you ahead of time! I REALLY appreciate any help or advice! ~Preston

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• GPG Invalid Signature

  - by user46421

  I am having problems with the following (in an attempt to remove hyperlinks, I have removed one of the "/" from the addresses): W: GPG error: http://archive.ubuntu.com oneiric Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG B725097B3ACC3965 Launchpad lffl W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 4874D3686E80C6B7 Launchpad PPA for Banshee Team W: GPG error: http://archive.getdeb.net jaunty-getdeb Release: The following signatures were invalid: BADSIG A8A515F046D7E7CF GetDeb Archive Automatic Signing Key <[email protected]> W: GPG error: http://badgerports.org lucid Release: The following signatures were invalid: BADSIG C90F9CB90E1FAD0C Jo Shields <[email protected]> W: GPG error: http://ppa.launchpad.net oneiric Release: The following signatures were invalid: BADSIG 976B5901365C5CA1 Launchpad PPA for transmissionbt W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/dlecan/openjdk/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sevenmachines/flash/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/sun-java-community-team/sun-java6/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found I have tried the following solutions which were in a closed case titled "The following signatures were invalid": First of all try sudo apt-get clean sudo apt-get update && sudo apt-get upgrade Some ISPs cache the packages and errors like these are reported then. If the above commands don't work, try sudo apt-get update -o Acquire::http::No-Cache=True and again sudo apt-get update && sudo apt-get upgrade If it still doesn't work, sudo apt-get update -o Acquire::BrokenProxy=true sudo apt-get update && sudo apt-get upgrade

  Read the article

• Compiling GCC or Clang for thumb drive on OSX

  - by user105524

  I have a mac book that I don't have admin rights to which I would like to be able to use either GCC or clang. Since I lack admin right I can't install binutils or a compiler to /usr directory. My plan is to install both of these (using an old macbook that I do have admin rights for) to a flash drive and then run the compiler off of there. How would one go building gcc or clang so that it could run just off of a thumb drive? I've tried both but haven't had any success. I've tried doing it defining as many of the directories as possible through configure, but haven't been able to successfully build. My current configure script for gcc-4.8.1 is (where USB20D is the thumb drive): ../gcc-4.8.1/configure --prefix=/Volumes/USB20FD/usr \ --with-local-prefix=/Volumes/USB20FD/usr/local \ --with-native-system-header-dir=/Volumes/USB20FD/usr/include \ --with-as=/Volumes/USB20FD/usr/bin/as \ --enable-languages=c,c++,fortran\ --with-ld=/Volumes/USB20FD/usr/bin/ld \ --with-build-time-tools=/Volumes/USB20FD/usr/bin \ AR=/Volumes/USB20FD/usr/bin/ar \ AS=/Volumes/USB20FD/usr/bin/as \ RANLIB=/Volumes/USB20FD/usr/bin/ranlib \ LD=/Volumes/USB20FD/usr/bin/ld \ NM=/Volumes/USB20FD/usr/bin/nm \ LIPO=/Volumes/USB20FD/usr/bin/lipo \ AR_FOR_TARGET=/Volumes/USB20FD/usr/bin/ar \ AS_FOR_TARGET=/Volumes/USB20FD/usr/bin/as \ RANLIB_FOR_TARGET=/Volumes/USB20FD/usr/bin/ranlib \ LD_FOR_TARGET=/Volumes/USB20FD/usr/bin/ld \ NM_FOR_TARGET=/Volumes/USB20FD/usr/bin/nm \ LIPO_FOR_TARGET=/Volumes/USB20FD/usr/bin/lipo CFLAGS=" -nodefaultlibs -nostdlib -B/Volumes/USB20FD/bin -isystem/Volumes/USB20FD/usr/include -static-libgcc -v -L/Volumes/USB20FD/usr/lib " \ LDFLAGS=" -Z -lc -nodefaultlibs -nostdlib -L/Volumes/USB20FD/usr/lib -lgcc -syslibroot /Volumes/USB20FD/usr/lib/crt1.10.6.o " Any obvious ideas of which of these options need to be turned on to install the appropriate files on the thumb drive during installation? What other magic occurs during xcode installation which isn't occurring here? Thanks for any suggestions

  Read the article

• Pitching My Software-Should I Get a Patent? [closed]

  - by Mike

  This Thursday I will be filming for a Canadian TV Show where I will be pitching my software to 5 Canadian Millionaires to invest in. The software is ridiculously basic but it is for sports teams, specifically football and basketball teams. (The show won't air till September) I made this in Adobe Flash using Actionscript. I have been selling the software to sports teams in the USA mostly including University Teams for $20. I have only sold 32 copies ($640), but I don't advertise, I just write articles on the subject. Now my question is this: I have no patent on this software since I have been doing this casually. Is it a bad idea to go onto this TV show and ask them for money for a software patent? Or should I be asking money for marketing/other things? Note: I also have no idea how much I should ask for. I know absolutely nothing about software patents but if it matters no other software exists that does this exact thing (however it could be easily duplicated).

  Read the article

• hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

  - by user108754

  I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

  Read the article

• How to make it so units don't stack up in one location?

  - by Daggio

  So I'm making a game in AS3, it's a strategy DotA-like game (for flash game equivalent, there's UDE) so far so good, I have the A* pathfinding algorithm all sorted out and the minion units move to the desired location as I want them to be. The problem a rise when a unit stops in a node that has already occupied by another friendly unit. Both (or more than two) of them stacks up in one location, it looks like they're one unit. I want to add collision detection so when they collide they don't stack up together. But now they stop when they collide on they way to a node. This isn't good because they won't move at all midway (they won't respond to enemy attacks like that). I've added a deltatime so they only stopped for 2 seconds before they move again to their designated designation. This moves them again but they flicker. Not how I want it. So, like the title said. How to make more than one units don't stack up in a node? And if possible, how to make them not flicker while moving (it's good if they can tell other friendly units on the way and avoid them accordingly)?

  Read the article

• Ubuntu 13.04 under Parallels Desktop - Black Desktop after X Windows Update

  - by Bob Reckhow

  I have been running Ubuntu 13.04 successfully on a MacBook Pro in a virtual machine in Parallels Desktop 9. Today (2013-10-17) after applying today's Ubuntu update, which included updates to X Windows, my Ubuntu 13.04 virtual machine launches, the launcher comes up, but the screen background is solid black, rather than the shaded orange colour of the default desktop background (and my desktop icons are "hidden behind this blackness", as well). I can launch applications from the launcher, and there is a very brief white flash on the screen, and then it returns to black. It's as if there is a "black blanket" covering the entire screen, so there is no way to interact with any application windows using the keyboard or mouse. The icons of the launcher are responsive to the mouse, so I can right-click and quit any application I have launched. But the rest of the screen is non-responsive to keyboard or mouse. This same behaviour happens with two different versions of Parallels Tools, so I am quite sure this is not a Parallels problem per se, although I could believe that it could be a paroblem with the interface between Parallels and this new updated X Windows code. Could anyone tell me what has happened, and how I might be able to fix this problem, so I can continue to use my Ubuntu 13.04 virtual machine? (I do have the option of reverting to a previous version of my virtual machine from before this update, but if possible I would prefer to keep my version of Ubuntu 13.04 up to date with the latest updates.) Thanks, Bob

  Read the article

• How to Create Shortcuts to Programs on USB Drives

  - by Lori Kaufman

  If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• Is it a must to focus on one specific IT subject to be succesful?

  - by Ahmet Yildirim

  Lately I'm deeply disturbed by the thought that I'm still not devoted to one specific IT subject after so many years of doing it as a hobby. I've been in so many different IT related hobbies since I was 12. I have spent 8 years and now I'm 20 and just finished freshman year at Computer Eng. Just to summarize the variety: 3D Game Dev. and Modelling (Acknex, Irrlicht , OpenGL, GLES, 3DSMAX) Mobile App.Dev (Symbian, Maemo, Android) Electronis (Arduino) Web.Dev. (PHP, MYSQL, Javascript, Jquery, RaphaelJS, Canvas, Flash etc.) Computer Vision (OpenCV) I need to start making money. But I'm having problem to pick the correct IT business to do so. Is it a problem to have interest in so many different IT subjects?(in business world) I'm having a lot of fun by doing all those stuff from time to time. Other than making money I also noticed that having so many different interests is lowering my productivity. But I'm still having difficulty to pick one. I'm feeling close to all those subjects (time to time).

  Read the article

• Oracle Solutions supporting ICAM deployments

  - by user12604761

  The ICAM architecture has become the predominant security architecture for government organizations.  A growing number of federal, state, and local organizations are in various stages of using Oracle ICAM solutions.  The relevance of ICAM has clearly extended beyond the Federal ICAM mandates to any government program that must enable standards based interoperability like health exchanges and public safety.  The state government endorsed version of ICAM was just released with the NASCIO SICAM Roadmap. ICAM solutions require an integrated security architecture.  The major new release in August of Oracle Identity Management 11gR2 focuses on a platform approach to identity management.  This makes it easier for government organizations to acquire and implement a comprehensive ICAM solution, rather than individual products.  The following analysts reports describe the value of the Oracle Solutions: According to The Aberdeen Group:  “Organizations can save up to 48% deploying a platform of  (identity management) solutions when compared to deploying point solutions” IDC Product Flash, July 2012:  “Oracle may have hit the home run grand slam in identity management recently with the announcement of Oracle Identity Management 11g R2." For additional information on the Oracle ICAM solutions, attend the Webcast on October 10, 2012:  ICAM Framework for Enabling Agile, Service Delivery. Visit the Oracle Secure Government Resource Center for information on enterprise security solutions that help government safeguard information, resources and networks.

  Read the article

• mount ext4 formated external drive->the drives green light won't stop flashing

  - by Gohlool

  I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

  Read the article

• Multiplayer online game engine/pipeline

  - by Slav

  I am implementing online multiplayer game where client must be written in AS3 (Flash) to embed game into browser and server in C++ (abstract part of which is already written and used with other games). Networking models may differ from each other, but currently I'm looking toward game's logic run on both client and server parts but they're written on different languages while it's not the main problem. My previous game (pretty big one - was implemented with efforts of ~5 programmers in 1.5 years) was mainly "written" within electronic tables as structured objects with implemented inheritance: was written standalone tool which generated AS3 and C++ (languages of platforms to which the game was published) using specified electronic tables file (.xls or .ods). That file contained ~50 tables with ~50 rows and ~50 columns each and was mainly written by game designers which do not know any programming languages. But that game was single-player. Having declared problem with my currently implementing MMO, I'm looking toward some vast pipeline, where will be resolved such problems like: game objects descriptions (which starships exist within game, how much HP they have, how fast move, what damage deal...) actions descriptions (what players or NPCs can do: attack each other, collect resources, build structures, move, teleport, cast spells) - actions are transmitted through server between clients influences (what happens when specified action applied on specified object, e.i "Ship A attacked Ship B: field "HP" of Ship B reduced by amount of field "damage" of Ship A" Influences can be much more difficult, yes, e.i. "damage is twice it's size when Ship has =5 allies around him in a 200 units range during night" and so on. If to be able to write such logic within some "design document" it will be easily possible to: let designers to do their job without programmer's intervention or any bug-prone programming validate described logic transfer (transform, convert) to any programming language where it will be executed Did somebody worked on something like that? Is there some tools/engines/pipelines which concernes with it? How to handle all of this problems simultaneously in a best way or do I properly imagine my tasks and problems to myself?

  Read the article

• 2D scene graph not transforming relative to parent

  - by Dr.Denis McCracleJizz

  I am currently in the process of coding my own 2D Scene graph, which is basically a port of flash's render engine. The problem I have right now is my rendering doesn't seem to be working properly. This code creates the localTransform property for each DisplayObject. Matrix m_transform = Matrix.CreateRotationZ(rotation) * Matrix.CreateScale(scaleX, scaleY, 1) * Matrix.CreateTranslation(new Vector3(x, y, z)); This is my render code. float dRotation; Vector2 dPosition, dScale; Matrix transform; transform = this.localTransform; if (parent != null) transform = localTransform * parent.localTransform; DecomposeMatrix(ref transform, out dPosition, out dRotation, out dScale); spriteBatch.Draw(this.texture, dPosition, null, Color.White, dRotation, new Vector2(originX, originY), dScale, SpriteEffects.None, 0.0f); Here is the result when I try to add the Stage then to the stage a First DisplayObjectContainer and then a second one. It may look fine but the problem lies in the fact that I add a first DisplayObjectContainer at (400,400) and the second one within it (that's the smallest one) at position (0,0). So he should be right over its parent but he gets render within the parent at the same position the parent has (400, 400) for some reason. It's just as if I double the parent's localMatrix and then render the second cat there. This is the code i use to loop through every childs. base.Draw(spriteBatch); foreach (DisplayObject childs in _childs) { childs.Draw(spriteBatch); }

  Read the article

• How can i install ubuntu on my ntfs hdd without formatting?

  - by Ridvan Coban

  My hdd is just one partition in ntfs (500gb) and 430 gb is used by my photos/movies/music etc which i never will want to lose. Actually i installed ubuntu on a usb flash drive (using it right now) but it is too slow that way. But my problem is : My computer is damaged ( maybe chipset or but not sure) and none of the windows versions (xp,vista,7) works on my pc. I get blue screen error as soon as windows startup logo shows. But ubuntu just works flawless. That means i cannot use wubi. I wanted to shrink my hdd without losing data (which can be done in windows) but found nothing about that on ubuntu forums. Is this possible? Or install ubuntu on my ntfs filesystem? Note : I don't have chance to backup 400 gbs of data. Sorry for my question if it's written a bit compex. I hope you get the point and someone has an idea ;)

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• Best way to go for simple online multi-player games?

  - by Mr_CryptoPrime

  I want to create a trivia game for my website. The graphic design does not have to be too fancy, probably no more advanced than a typical flash game. It needs to be secure because I want users to be able to play for real money. It also needs to run fast so users don't spend their time frustrated with game freezing. Compatibility, as with almost all online products, is key because of the large target market. I am most acquainted with Java programming, but I don't want to do it in Java if there is something much better. I am assuming I will have to utilize a variety of different languages in order for everything to come together. If someone could point out the main structure of everything so I could get a good start that would be great! 1) Language choice for simple secure online multiplayer games? 2) Perhaps use a database like MySQL, stored on a secure server for the trivia questions? 3) Free educational resources and even simpler projects to practice? Any ideas or suggestions would be helpful...Thanks!

  Read the article

• How to make a good portfolio for IT student (who loves programming) like me?

  - by Viet

  I am currently a college student, and going to apply for an university in probably next month. Unlike art student who easily put on their works such as models, designs and so on on their portfolio; I am hitting a dead corner trying to find a "creative" way to showcase my work as a programmer. It would be normal if programmer shows his good project with source code and everything else. Well, it should be no problem with actual "good" projects, but all of my projects are crappy (can't help it because I am still student, and don't have much work experience) and I don't even know it's worth to show. Nonetheless, I have learned a lot in only 1 year since I started programming. I am now familiar with Java, PHP, Actionscript3, C#, Objective-C and on my way to learn Ruby. I plan to build a Flash portfolio using Actionscript with Ruby as backend to show what I have learnt. The problem is idea. How to show people that I learned a lot of useful thing? Otherwise I hit the dead end and LOL just show what I have on Github (but i certainly never want that...)

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >