Search Results

Search found 111187 results on 4448 pages for 'project server 2007'.

Page 214/4448 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Strange rare out-of-order data received using Indy

    - by Jim
    We're having a bizarre problem with Indy10 where two large strings (a few hundred characters each) that we send out one after the other are appearing at the other end intertwined oddly. This happens extremely infrequently. Each string is a complete XML message terminated with a LF and in general the READ process reads an entire XML message, returning when it sees the LF. The call to actually send the message is protected by a critical section around the call to the IOHandler's writeln method and so it is not possible for two threads to send at the same time. (We're certain the critical section is implemented/working properly). This problem happens very rarely. The symptoms are odd...when we send string A followed by string B what we received at the other end (on the rare occasions where we have failure) is the trailing section of string A by itself (i.e., there's a LF at the end of it) followed by the leading section of string A and then the entire string B followed by a single LF. We've verified that the "timed out" property is not true after the partial read - we log that property after every read that returns content. Also, we know there are no embedded LF characters in the string, as we explicitly replace all non-alphanumeric characters in the string with spaces before appending the LF and sending it. We have log mechanisms inside the critical sections on both the transmission and receiving ends and so we can see this behavior at the "wire". We're completely baffled and wondering (although always the lowest possibility) whether there could be some low-level Indy issues that might cause this issue, e.g., buffers being sent in the wrong order....very hard to believe this could be the issue but we're grasping at straws. Does anyone have any bright ideas?

    Read the article

  • How can I script SCCM to change the rate limit percentage?

    - by Brian
    I am trying to script SCCM 2007so I don't have to manually go through 400 servers and set the rate limit by hand. I want all of the servers to use 75% of their bandwith 24 hours a day. I am guessing powershell and wmi is going to be the best way to go about doing this, but any suggestions would be welcome.

    Read the article

  • SQL SERVER – Solution – 2 T-SQL Puzzles – Display Star and Shortest Code to Display 1

    - by pinaldave
    Earlier on this blog we had asked two puzzles. The response from all of you is nothing but Amazing. I have received 350+ responses. Many are valid and many were indeed something I had not thought about it. I strongly suggest you read all the puzzles and their answers here - trust me if you start reading the comments you will not stop till you read every single comment. Seriously trust me on it. Personally I have learned a lot from it. Let us recap the puzzles here quickly. Puzzle 1: Why following code when executed in SSMS displays result as a * (Star)? SELECT CAST(634 AS VARCHAR(2)) Puzzle 2: Write the shortest code that produces results as 1 without using any numbers in the select statement. Bonus Q: How many different Operating System (OS) NuoDB support? As I mentioned earlier the participation was nothing but Amazing. I will write about the winners and the best answers in short time. Meanwhile I will give to the point answers to above puzzles. Solution 1: When you convert character or binary expressions (char, nchar, nvarchar, varchar,binary, or varbinary) to an expression of a different data type, data can be truncated, only partially displayed, or an error is returned because the result is too short to display. Conversions to char, varchar, nchar, nvarchar, binary, and varbinary are truncated, except for the conversions shown in the following table. Reference of the text and table from MSDN. Solution 2: The shortest code to produce answer 1 : SELECT EXP($) or SELECT COS($) or SELECT DAY($) When SELECT $ it gives us the result as 0.00 and the EXP of the same is 1. I believe it is pretty neat. There were plenty other answers but this was the shortest. Another shorter answer would be PRINT EXP($) but no one has proposed that as in original Question I have explicitly mentioned SELECT in the original question. Bonus Answer: 5 OS: Windows, MacOS, Linux, Solaris, Joyent SmartOS Reference Please do read every single comment here. Do leave a comment which one do you think is the best comment out of all the comments. Meanwhile if there is a better solution and I have missed it do let me know as we still have time to correct it. I will be selecting the winner before the weekend as I am going through each and every of 350 comment. I will be selecting the best comments along with the winning comment. If our selection matches – one of you may still win something cool.  Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: NuoDB

    Read the article

  • Have SSIS' differing type systems ever caused you problems?

    - by jamiet
    One thing that has always infuriated me about SSIS is the fact that every package has three different type systems; to give you an idea of what I am talking about consider the following: The SSIS dataflow's type system is made up of types called DT_*  (e.g. DT_STR, DT_I4) The SSIS variable type system is based on .Net datatypes (e.g. String, Int32) The types available for Execute SQL Task's parameters are based on something else - I don't exactly know what (e.g. VARCHAR, LONG) Speaking euphemistically ... this is not an optimum situation (were I not speaking euphemistically I would be a lot ruder) and hence I have submitted a suggestion to Connect at [SSIS] Consolidate three type systems into one requesting that it be remedied. This accompanying blog post is not however a request for votes (though that would be nice); the reason is actually subtler than that. Let me explain. I have been submitting bugs and suggestions pertaining to SSIS for years and have, so far, submitted over 200 Connect items. If that experience has taught me anything it is this - Connect items are not generally actioned because they are considered "nice to have". No, SSIS Connect items get actioned because they cause customers grief and if I am perfectly honest I must admit that, other than being a bit gnarly, SSIS' three type system architecture has never knowingly caused me any significant problems. The reason for this blog post is to ask if any reader out there has ever encountered any problems on account of SSIS' three type systems or have you, like me, never found them to be a problem? Errors or performance degredation caused by implicit type conversions would, I believe, present a strong case for getting this situation remedied in a future version of SSIS so if you HAVE encountered such problems I would encourage you to leave a comment on the Connect submission accordingly. Let me know in the comments too - I would be interested to hear others' opinions on this. @Jamiet

    Read the article

  • C# VSTO: Coloring pivottable cells

    - by tomboz
    HI, I'm trying to make some code color a PivotTable. It works just fine coloring the cells it's supposed to, but if I refresh the table, all the colors disappear, as if the colors haven't been properly attached to the PivotTable. I have the following code (this is a snip from a larger code): myPivotTable.PivotSelect("'" + item["Name"].ToString() + "'[All;Total]", XlPTSelectionMode.xlDataAndLabel, true); ((Range)Globals.ThisWorkbook.Application.Selection).Interior.Color = 15962653; I've tried doing a macro in Excel in VB, and when it runs, it work works perfectly, so I don't understand why the C# VSTO won't work... ActiveSheet.PivotTables("PivotTable1").PivotSelect "'ItemName'[All;Total]", xlDataAndLabel, True Selection.Interior.Color = 15962653 Help is much appreciated :)

    Read the article

  • Create Excel document from a ContentType in SharePoint

    - by Saab
    Is it possible to create an Excel document using VSTO, using a SharePoint contenttype? Creating a document in VSTO based on a template is easy. Workbook newWorkbook = this.Application.Workbooks.Add(@"C:\temp\TestTemplate.xltx"); But the "template" that's assigned to a content type in SharePoint has xlsx as an extension.

    Read the article

  • Unable to remove master -> child subform links in microsoft access 2003

    - by Doug
    Hi, I am having an issue removing the master - child link fields in an access subreport data form. I have tried every avenue to remove them, using the properties window of the subreport as well as the link wizard. I have also deleted the subreport from the database and then gone as far as re-importing the existing objects into a new access instance. As soon as I re-added the subform back in and name it the same name the link fields show back up. Something is apparently corrupt, but I have run out of ideas at this point on how to clear them. Any Ideas would be appreciated. Thanks Doug

    Read the article

  • InfoPath Repeating Group with Data from SharePoint and User Input

    - by 0x808080
    I have a series of questions which are pulled from a SharePoint list and loaded into a repeating section. The section has three elements, the Question # (from SharePoint), and Question itself (from SharePoint), and a drop down box Yes/No (NOT from SharePoint)... The repeating group portion works just fine, it is pulling all Question # and Questions from the SharePoint site, but I cannot bind the drop down box (yes/no) to any sort of local data source in order to record the information. Essentially what I have is a dynamically generated form which pulls questions off a SharePoint and a user will answer Yes or No for each question. I cannot associate the Yes/No drop down with anything because it resides within a Repeating section... Thanks for any help!

    Read the article

  • How do I install both D2007 and D2010?

    - by DoctorBean
    From what I have gathered, one can have both editions of Delphi installed. My concern is that default paths, etc, may get confused especially when installing 3rd party components. The reason why I want to do this is I have some 3rd party components which have not been updated. Although I have the source files, I'm not knowledgeable enough to update them. I have tried compiling it for D2010 and received so many errors that it would be easier to install and use it in D2007. I'm running Windows 7. Thanks in advance.

    Read the article

  • MS-Access: What could cause one form with a join query to load right and another not?

    - by Daniel Straight
    Form1 Form1 is bound to Table1. Table1 has an ID field. Form2 Form2 is bound to Table2 joined to Table1 on Table2.Table1_ID=Table1.ID Here is the SQL (generated by Access): SELECT Table2.*, Table1.[FirstFieldINeed], Table1.[SecondFieldINeed], Table1.[ThirdFieldINeed] FROM Table1 INNER JOIN Table2 ON Table1.ID = Table2.[Table1_ID]; Form2 is opened with this code in Form1: DoCmd.RunCommand acCmdSaveRecord DoCmd.OpenForm "Form2", , , , acFormAdd, , Me.[ID] DoCmd.Close acForm, "Form1", acSaveYes And when loaded runs: Me.[Table1_ID] = Me.OpenArgs When Form2 is loaded, fields bound to columns from Table1 show up correctly. Form3 Form3 is bound to Table3 joined to Table2 on Table3.Table2_ID=Table2.ID Here is the SQL (generated by Access): SELECT Table3.*, Table2.[FirstFieldINeed], Table2.[SecondFieldINeed] FROM Table2 INNER JOIN Table3 ON Table2.ID = Table3.[Table2_ID]; Form3 is opened with this code in Form2: DoCmd.RunCommand acCmdSaveRecord DoCmd.OpenForm "Form3", , , , acFormAdd, , Me.[ID] DoCmd.Close acForm, "Form2", acSaveYes And when loaded runs: Me.[Table2_ID] = Me.OpenArgs When Form3 is loaded, fields bound to columns from Table2 do not show up correctly. WHY? UPDATES I tried making the join query into a separate query and using that as my record source, but it made no difference at all. If I go to the query for Form3 and view it in datasheet view, I can see that the information that should be pulled into the form is there. It just isn't showing up on the form.

    Read the article

  • Always use dtexec.exe to test performance of your dataflows. No exceptions.

    - by jamiet
    Earlier this evening I posted a blog post entitled Investigation: Can different combinations of components effect Dataflow performance? where I compared the performance of three different dataflows all working to the same overall goal. I wanted to make one last point related to the results but I thought it warranted a blog post all of its own. Here is a screenshot of one of the dataflows that I was testing: Pretty complicated I’m sure you’ll agree. Now, when I executed this dataflow in the test it was executing in ~19seconds however in that case I was executing using the command-line tool dtexec. I also tried executing inside the BIDS development environment and in that case it took much longer – 139seconds. That’s more than seven times as long. The point I want to make is very simple. If you are testing your dataflows for performance please use dtexec. Nothing else will suffice. @Jamiet

    Read the article

  • SPWeb.Webs, Site vs SubSite

    - by noob.spt
    Hi, I have a very basic question here. I am confused between SPSite. SiteCollection and SPWeb. So my understanding is (or what I could research on this) that, http://My_server TOP Level SIte or SPWEbApplication http://My_server/My_site Site Collection or SPSite Now a site under SPSite that will be referenced through SPWeb. So what are we getting when using SPWeb.Webs. What is a Subsite? Please let me know if I need to rephrase the question or more info is needed. Thanks. SPWeb mySite = SPContext.Current.Web; SPWebCollection sites = mySite.Webs; foreach (SPWeb subSite in sites) { Response.Write(SPEncode.HtmlEncode(subSite.Title) + "<BR>"); }

    Read the article

  • How Unicode strings can be passed from a managed to an unmanaged function...

    - by Who Cares
    I will really appreciate anybody's help about how a Unicode string can be passed (marshaled) from a managed (Delphi .NET) to an unmanaged (Delphi's Win32 DLL) function. The managed environment (Delphi .NET): ... interface ... const TM_PRO_CONVERTER = 'TM.PROFileConverter.dll'; function ImportLineworksFromPROFile(FileName :String; TargetFileNameDXF :String): Integer; ... implementation ... [DllImport(TM_PRO_CONVERTER, EntryPoint = 'ImportLineworksFromPROFile', CharSet = CharSet.Ansi, SetLastError = True, CallingConvention = CallingConvention.StdCall)] function ImportLineworksFromPROFile(FileName :String; TargetFileNameDXF :String): Integer; external; ... The unmanaged environment (Delphi's Win32 DLL): library TM.PROFileConverter; ... function ImportLineworksFromPROFile(FileName :String; TargetFileNameDXF :String) :Integer; stdcall; exports ImportLineworksFromPROFile; ... Thank you for your time.

    Read the article

  • Delphi hook to redirect to different ip

    - by Chris
    What is the best way to redirect ANY browser to a different ip for specific sites? For example if the user will type www.facebook.com in any browser he will be redirected to 127.0.0.1. Also the same should happen if he will type 66.220.146.11. What I have until now is this: using the winpkfilter I am able to intercept all the traffic on port 80, with type(in or out), source ip, destination ip and packet. My problem is to modify somehow the packet so the browser will be redirected. This is the code that i have right now: program Pass; {$APPTYPE CONSOLE} uses SysUtils, Windows, Winsock, winpkf, iphlp; var iIndex, counter : DWORD; hFilt : THANDLE; Adapts : TCP_AdapterList; AdapterMode : ADAPTER_MODE; Buffer, ParsedBuffer : INTERMEDIATE_BUFFER; ReadRequest : ETH_REQUEST; hEvent : THANDLE; hAdapter : THANDLE; pEtherHeader : TEtherHeaderPtr; pIPHeader : TIPHeaderPtr; pTcpHeader : TTCPHeaderPtr; pUdpHeader : TUDPHeaderPtr; SourceIP, DestIP : TInAddr; thePacket : PChar; f : TextFile; SourceIpString, DestinationIpString : string; SourceName, DestinationName : string; function IPAddrToName(IPAddr : string) : string; var SockAddrIn : TSockAddrIn; HostEnt : PHostEnt; WSAData : TWSAData; begin WSAStartup($101, WSAData); SockAddrIn.sin_addr.s_addr := inet_addr(PChar(IPAddr)); HostEnt := gethostbyaddr(@SockAddrIn.sin_addr.S_addr, 4, AF_INET); if HostEnt < nil then begin result := StrPas(Hostent^.h_name) end else begin result := ''; end; end; procedure ReleaseInterface(); begin // Restore default mode AdapterMode.dwFlags := 0; AdapterMode.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); // Set NULL event to release previously set event object SetPacketEvent(hFilt, hAdapter, 0); // Close Event if hEvent < 0 then CloseHandle(hEvent); // Close driver object CloseFilterDriver(hFilt); // Release NDISAPI FreeNDISAPI(); end; begin // Check the number of parameters if ParamCount() < 2 then begin Writeln('Command line syntax:'); Writeln(' PassThru.exe index num'); Writeln(' index - network interface index.'); Writeln(' num - number or packets to filter'); Writeln('You can use ListAdapters to determine correct index.'); Exit; end; // Initialize NDISAPI InitNDISAPI(); // Create driver object hFilt := OpenFilterDriver('NDISRD'); if IsDriverLoaded(hFilt) then begin // Get parameters from command line iIndex := StrToInt(ParamStr(1)); counter := StrToInt(ParamStr(2)); // Set exit procedure ExitProcessProc := ReleaseInterface; // Get TCP/IP bound interfaces GetTcpipBoundAdaptersInfo(hFilt, @Adapts); // Check paramer values if iIndex > Adapts.m_nAdapterCount then begin Writeln('There is no network interface with such index on this system.'); Exit; end; hAdapter := Adapts.m_nAdapterHandle[iIndex]; AdapterMode.dwFlags := MSTCP_FLAG_SENT_TUNNEL or MSTCP_FLAG_RECV_TUNNEL; AdapterMode.hAdapterHandle := hAdapter; // Create notification event hEvent := CreateEvent(nil, TRUE, FALSE, nil); if hEvent <> 0 then if SetPacketEvent(hFilt, hAdapter, hEvent) <> 0 then begin // Initialize request ReadRequest.EthPacket.Buffer := @Buffer; ReadRequest.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); counter := 0; //while counter <> 0 do while true do begin WaitForSingleObject(hEvent, INFINITE); while ReadPacket(hFilt, @ReadRequest) <> 0 do begin //dec(counter); pEtherHeader := TEtherHeaderPtr(@Buffer.m_IBuffer); if ntohs(pEtherHeader.h_proto) = ETH_P_IP then begin pIPHeader := TIPHeaderPtr(Integer(pEtherHeader) + SizeOf(TEtherHeader)); SourceIP.S_addr := pIPHeader.SourceIp; DestIP.S_addr := pIPHeader.DestIp; if pIPHeader.Protocol = IPPROTO_TCP then begin pTcpHeader := TTCPHeaderPtr(Integer(pIPHeader) + (pIPHeader.VerLen and $F) * 4); if (pTcpHeader.SourcePort = htons(80)) or (pTcpHeader.DestPort = htons(80)) then begin inc(counter); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then Writeln(counter, ') - MSTCP --> Interface') else Writeln(counter, ') - Interface --> MSTCP'); Writeln(' Packet size = ', Buffer.m_Length); Writeln(Format(' IP %.3u.%.3u.%.3u.%.3u --> %.3u.%.3u.%.3u.%.3u PROTOCOL: %u', [byte(SourceIP.S_un_b.s_b1), byte(SourceIP.S_un_b.s_b2), byte(SourceIP.S_un_b.s_b3), byte(SourceIP.S_un_b.s_b4), byte(DestIP.S_un_b.s_b1), byte(DestIP.S_un_b.s_b2), byte(DestIP.S_un_b.s_b3), byte(DestIP.S_un_b.s_b4), byte(pIPHeader.Protocol)] )); Writeln(Format(' TCP SRC PORT: %d DST PORT: %d', [ntohs(pTcpHeader.SourcePort), ntohs(pTcpHeader.DestPort)])); //get the data thePacket := pchar(pEtherHeader) + (sizeof(TEtherHeaderPtr) + pIpHeader.VerLen * 4 + pTcpHeader.Offset * 4); { SourceIpString := IntToStr(byte(SourceIP.S_un_b.s_b1)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b2)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b3)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b4)); DestinationIpString := IntToStr(byte(DestIP.S_un_b.s_b1)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b2)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b3)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b4)); } end; end; end; // if ntohs(pEtherHeader.h_proto) = ETH_P_RARP then // Writeln(' Reverse Addr Res packet'); // if ntohs(pEtherHeader.h_proto) = ETH_P_ARP then // Writeln(' Address Resolution packet'); //Writeln('__'); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then // Place packet on the network interface SendPacketToAdapter(hFilt, @ReadRequest) else // Indicate packet to MSTCP SendPacketToMstcp(hFilt, @ReadRequest); { if counter = 0 then begin Writeln('Filtering complete'); readln; break; end; } end; ResetEvent(hEvent); end; end; end; end.

    Read the article

  • Sharepoint item locking after getting approved

    - by user304628
    I have a sharepoint custom list which has 5 columns ..the user should fill in first three columns and the other two should be locked for filling ..when the user enters the items and start the workflow if the workflow gets approved the 3 columns should be locked for editing and then the other two should be available for editing . Can someone please tell me how can i achieve this. Thanks

    Read the article

  • What could cause my LAN Pings be greater than 100ms?

    - by James Holland
    I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

    Read the article

  • Get logged in user details in sharepoint c# webpart

    - by MalphasWats
    Hi, After much wrangling I have a development environment for building sharepoint webparts in c#. I'm completely new to SP development, so I haven't quite found the various API docs, so I'm hoping someone can help get me started. Eventually, I want to write a simple web part that allows its user to display different content depending on who the current user is. What I'd like to do first though is just build a dead simple webpart that will simply print out the current user's details - username, full name and any permissions groups that they have. Thanks

    Read the article

  • Using Excel to work with SQL data (read/write)

    - by Tyler Brock
    I have a ton of data in a sql database which I would like to be able to import and display in excel (I can already do this) and additionally modify or append to the dataset within excel and write the changes/additions back to the database. What is the best way to go about doing something like this? Please let me know, thanks!

    Read the article

  • Combo-box values automatically update

    - by glinch
    Hi all, hopefully somebody can help The table structure is as follows: tblCompany: compID compName tblOffice: offID, compID, add1, add2, add3 etc... tblEmployee: empID Name, telNo, etc... offID I have a form that contains contact details for employees, all works ok using after update. A cascading combo box, cmbComp, allows me to select a company, and inturn select the appropriate office, cboOff, and updates the corresponding tblEmployee.offID field correctly. Fields are automatically updated for the address also cmbComp: RowSource SELECT DISTINCT tblOffice.compID, tblCompany.compID FROM tblCompany INNER JOIN AdjusterCompanyOffice ON tblCompany.compID=tblOffice.compID ORDER BY tblCompany.compName; cboOff: RowSource SELECT tblCompany.offID, tblCompany.Address1, tblCompany.Address2, tblCompany.Address3, tblCompany.Address4, tblCompany.Address5 FROM tblCompany ORDER BY tblCompany.Address1; The problem I am having is that when i load a new record how to retrieve the data and automatically load the cmbComp and text fields. The cboOff combo box loads correctly as the control source for this is the offID I imagine there must be a way of setting the value on opening the record? Not sure how though. I dont think I can set the controlsource cmbComp or text fields, or can I? Any help/point in the right direction appreciated, have been searching for a way to do this but cant get anywhere!

    Read the article

  • Microsoft propose une version d'évaluation gratuite de Project 2010 et des vidéos de présentation de

    Mise à jour du 11/06/10 Microsoft propose une version d'évaluation gratuite de Project 2010 Et des vidéos de présentation de son outil de gestion de projet Project est certainement un des produits les plus méconnus de Microsoft. Pourtant, cette application spécialisée pour la gestion de projet ne manque pas de qualités. Il peut, dans bien des cas, faire économiser un temps précieux aux développeurs qui souhaitent développer et non pas passer leurs journées à organiser ou à planifier des tâches pour les autres. Pour remédier à ce relatif anonymat de Project, Microsoft a décidé de proposer

    Read the article

  • Sharepoint Sites

    - by frbry
    Hello, Is it possible to make a site "Home" in MOSS2007? For example, when i enter my Sharepoint portal, i see two tabs on top: Home | Just a Site I want to delete the site under Home and set "Just a site" as default site (or Home?). Thanks.

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >