Search Results

Search found 16179 results on 648 pages for 'extension methods'.

Page 215/648 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• What file format can I use to output a formatted text file straight from a program without having the markup be too complicated?

  - by Matt

  Premise: I am parsing a file that is quite nearly XML, but not quite. From this file I would like to extract data and output in a file that a user could open up in some program and read. To make the data reasonable, I would almost certainly need to format the text. In case it matters, I will probably be using Java to write the program. Problem: I cannot find a file format that supports formatting without having terribly complex rules and encoding problems. Attempts: I looked into a basic .txt extension first, but it does not have enough formatting advantage. I then tried a .rtf extension, but the rules for outputting text seem to be terribly complicated. It was then suggested that I used XML, but I do not understand how this file would be viewed. This appears to be probably the best solution, but I don't understand much about it. Perhaps somebody could shed some light here. In Other Words: Could somebody suggest and easy to use file format and/or shed some light on how to use XML for text formatting and viewing?

  Read the article

• Is there a table of OpenGL extensions, versions, and hardware support somewhere?

  - by Thomas

  I'm looking for some resource that can help me decide what OpenGL version my game needs at minimum, and what features to support through extensions. Ideally, a table of the following format: 1.0 1.1 1.2 1.2.1 1.3 ... multitexture - ARB ARB core core texture_float - EXT EXT ARB ARB ... (Not sure about the values I put in, but you get the idea.) The extension specs themselves, at opengl.org, list the minimum OpenGL version they need, so that part is easy. However, many extensions have been accepted and became core standard in subsequent OpenGL versions, but it is very hard to find when that happened. The only way I could find is to compare the full OpenGL standards document for each version. On a related note, I would also very much like to know which extensions/features are supported by which hardware, to help me decide what features I can safely use in my game, and which ones I need to make optional. For example, a big honkin' table like this: MAX_TEXTURE_IMAGE_UNITS MAX_VERTEX_TEXTURE_IMAGE_UNITS ... GeForce 6xxx 8 4 GeForce 7xxx 16 8 ATi x300 8 4 ... (Again, I'm making the values up.) The table could list hardware limitations from glGet but also support for particular extensions, and limitations of such extension support (e.g. what floating-point texture formats are supported in hardware). Any pointers to these or similar resources would be hugely appreciated!

  Read the article

• How to test if a user has SELECTED a file to upload ?

  - by Tristan

  Hello, on a page, i have : if (!empty($_FILES['logo']['name'])) { $dossier = 'upload/'; $fichier = basename($_FILES['logo']['name']); $taille_maxi = 100000; $taille = filesize($_FILES['logo']['tmp_name']); $extensions = array('.png', '.jpg', '.jpeg'); $extension = strrchr($_FILES['logo']['name'], '.'); if(!in_array($extension, $extensions)) { $erreur = 'ERROR you must upload the right type'; } if($taille>$taille_maxi) { $erreur = 'too heavy'; } if(!empty($erreur)) { ....................... } The problem is, if the users wants to edit information WITHOUT uploading a LOGO, it raises an error : 'error you must upload the right type' So, if a user didn't put anything in the inputbox in order to upload it, i don't want to enter in these conditions test. i tested : if (!empty($_FILES['logo']['name']) and if (isset($_FILES['logo']['name']) but both doesn't seems to work. Any ideas? edit : maybe i wasn't so clear, i don't want to test if he uploaded a logo, i want to test IF he selected a file to upload, because right now, if he doesn't select a file to upload, php raises an error telling he must upload with the right format. thanks.

  Read the article

• Bind to a markup externsion property

  - by user314580

  Hi, I have written a markup extension which stores amongst others a help text. This help text is shown on the right side of the main window. This works fine. Now, I want to add a tooltip for every control. The content of the tooltip should be same as for the helptext extension. The XAML code: <ListView ctrl:ListViewLayoutManager.Enabled="true" x:Name="ListViewSources" ItemsSource="{Binding SourceItems}" ItemContainerStyle="{DynamicResource ListViewItemStyleAlternate}" Height="150" MinWidth="350" Helper:HelpExtension.IsControl="true" Helper:HelpExtension.HelpText="{x:Static strings:GUIResource.HelpProfilesSourcesDescriptionText}" > <ListView.ToolTip> <ToolTip Style="{DynamicResource Own_TooltipStyle}"></ToolTip> </ListView.ToolTip> And now the code of the style: If I run the program I get the binding error: System.Windows.Data Error: 39 : BindingExpression path error: 'Helper:HelpExtension' property not found on 'object' ''ListView' (Name='ListViewSources')'. BindingExpression:Path=Helper:HelpExtension.HelpText; DataItem='ListView' (Name='ListViewSources'); target element is 'TextBlock' (Name=''); target property is 'Text' (type 'String') Does anybody know how I can bind the TextBlock to the content of Helper:HelpExternsion.HelpText? Thanks Dieter

  Read the article

• How to deploy to multiple redundant production servers with "cap deploy"?

  - by Chad Johnson

  Capistrano is working great to deploy to a single server. However, I have multiple production API servers for my web application. When I deploy, my code needs to get deployed to every API server at once. Specifying each server manually is NOT the solution I am looking for (e.g. I don't want to do "cap api1 deploy; cap api2 deploy"). Is there a way, using Capistrano, to deploy to all servers at once, with just a simple "cap deploy"? I'm wondering what changes I would need to make to a typical deploy.rb file, whether I'd need to create a separate file for each server, and whether and how the Capfile would need to be changed. Also, I need to be able to specify a different deploy_to path for each server. And ideally, I wouldn't have to repeat things in different config files for different servers (eg. wouldn't have to specify :repository, :application, etc. multiple times). I have spent hours searching Google on this and looking through tutorials, but I have found nothing helpful. Here is a snippet from my current deploy.rb file: set :application, "testapplication" set :repository, "ssh://domain.com//srv/hg/#{application}" set :scm, :mercurial set :deploy_to, "/srv/www/#{application}" role :web, "domain.com" role :app, "domain.com" role :db, "domain.com", :primary => true, :norelease => true Should I just use the multistage extension and do this? task :deploy_everything do system "cap api1 deploy" system "cap api2 deploy" system "cap api2 deploy" end That could work, but I feel like this isn't what this extension is meant for...

  Read the article

• Loading child entities with JPA on Google App Engine

  - by Phil H

  I am not able to get child entities to load once they are persisted on Google App Engine. I am certain that they are saving because I can see them in the datastore. For example if I have the following two entities. public class Parent implements Serializable{ @Id @GeneratedValue(strategy = GenerationType.IDENTITY) @Extension(vendorName="datanucleus", key="gae.encoded-pk", value="true") private String key; @OneToMany(cascade=CascadeType.ALL) private List<Child> children = new ArrayList<Child>(); //getters and setters } public class Child implements Serializable{ @Id @GeneratedValue(strategy = GenerationType.IDENTITY) @Extension(vendorName="datanucleus", key="gae.encoded-pk", value="true") private String key; private String name; @ManyToOne private Parent parent; //getters and setters } I can save the parent and a child just fine using the following: Parent parent = new Parent(); Child child = new Child(); child.setName("Child Object"); parent.getChildren().add(child); em.persist(parent); However when I try to load the parent and then try to access the children (I know GAE lazy loads) I do not get the child records. //parent already successfully loaded parent.getChildren.size(); // this returns 0 I've looked at tutorial after tutorial and nothing has worked so far. I'm using version 1.3.3.1 of the SDK. I've seen the problem mentioned on various blogs and even the App Engine forums but the answer is always JDO related. Am I doing something wrong or has anyone else had this problem and solved it for JPA?

  Read the article

• Using hover to swap images, I don't want to swap images if I'm on '.this_page'...

  - by richoid

  When I land on the page, another function (not shown, that works fine) sets the class of the appropriate nav to '.this_page' and then I roll over, and the images swap correctly, but when I hover and leave 'img.this_page' it swaps, the second time I do the hover. I don't want it 'img.this_page' to swap. I tried unbinding mouseout, but on hover apparently it rebinds... so each time you hover, it resets. Page is at http://flourgarden.com/wp/ Here's my function: function hoverNavs() { var baseURL='http://www.flourgarden.com/wp/wp-content/themes/flourgarden/images/nav'; var cache=[]; $j('.lcolumn a img').each(function() { var t = $j(this); var src1 = t.attr('src'); // initial src var newSrc = src1.substring(src1.lastIndexOf('/'), src1.lastIndexOf('.')); // let's get file name without extension i = baseURL+newSrc+'_select.png'; cache.push(i); t.hover(function(){ $j(this).attr('src', baseURL+newSrc+ '_select.' + /[^.]+$/.exec(src1)); //last part is for extension }, function(){ if($j(this).class == "this_page") { $j(this).attr('src', baseURL+newSrc+ '_select.' + /[^.]+$/.exec(src1)); } else { $j(this).attr('src', baseURL+newSrc+ '.' + /[^.]+$/.exec(src1)); } }); }); }

  Read the article

• How can I add SOAP Headers to a WSDL generated Borland C++ Builder 6 application.

  - by MJG

  Using a WSDL that requires a SOAP HEADER for Authentication (fragment below) code that gets generated when creating a web service client via the "WSDL Importer" has no concept of the Authentication Headers and there are no examples in BCB6 C++ Examples/WebServices directories that show how, and nothing on Web that I can find. Anyone with BCB6 C++ (not Delphi) have an example of adding SOAP Headers to a TRemotable subclass? <s:element name="AuthenticationHeader" type="tns:AuthenticationHeader"/> <s:complexType name="AuthenticationHeader"> <s:complexContent mixed="false"> <s:extension base="tns:UserAuthHeader"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="Function" type="s:string"/> <s:element minOccurs="1" maxOccurs="1" name="TimeOutMilliSec" type="s:int"/> </s:sequence> </s:extension> </s:complexContent> </s:complexType> <s:complexType name="UserAuthHeader"> <s:sequence> <s:element minOccurs="0" maxOccurs="1" name="Username" type="s:string"/> <s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string"/> </s:sequence> <s:anyAttribute/> </s:complexType>

  Read the article

• What is the best way to do scoped finds based on access control rules in Rails?

  - by Rafael Szuminski

  Hi I need to find an elegant solution to scoped finds based on access control rules. Essentially I have the following setup: Users Customers AccessControl - Defines which user has access to another users data Users need to be able to access not just their own customers but also shared customers of other users. Obviously something like a simple association will not work: has_many :customers and neither will this: has_many :customers, :conditions => 'user_id in (1,2,3,4,5)' because the association uses with_scope and the added condition is an AND condition not an OR condition. I also tried overriding the find and method_missing methods with the association extension like this: has_many :customers do def find(*args) #get the user_id and retrieve access conditions based on the id #do a find based on the access conditions and passed args end def method_missing(*args) #get the user_id and retrieve access conditions based on the id #do a find based on the access conditions and passed args end end but the issue is that I don't have access to the user object / parent object inside the extension methods and it just does not work as planned. I also tried default_scope but as posted here before you can't pass a block to a default scope. Anyhow, I know that data segmentation and data access controls have been done before using rails and am wondering if somebody found an elegant way to do it. UPDATE: The AccessControl table has the following layout user_id shared_user_id The customer table has this structure: id account_id user_id first_name last_name Assuming the the following data would be in the AccessControl table: 1 1 1 3 1 4 2 2 2 13 and so on... And the account_id for user 1 is 13 I need to be able to retrieve customers that can be best described with the following sql statement: select * from customers where (account_id = 13 and user_id = null) or (user_id in (1,3,4))

  Read the article

• What is a simple way to add a timer to a method

  - by John

  The following is in C#. I'm trying to do something very simple (I think). I have a method that loads an XML document XDocument doc = XDocument.Load(uri); , but I don't want to tie up pc resources if there are issues (connectivity, document size, etc.). So I'd like to be able to add a timeout variable that will cut the method off after a given number of seconds. I'm a newbie when it comes to asynchronous programming and find it confusing that there are so many examples written so many different ways . . . and none of them appear simple. I'd like a simple solution, if possible. Here's my thoughts so far on possible solution paths: 1) A method that wraps the existing load public XDocument LoadXDocument(string uri, int timeout){ //code } 2) A wrapper, but as an extension method XDocument doc = XDocument.LoadWithTimeout(string uri, int timeout); 3) A generic extension method. Object obj = SomeStaticClass.LoadWithTimeout(??? method, int timeout); 3), on its face seems really nice, because it would mean being able to generically add timeouts to many different method calls and not specifically tied to one type of object, but I suspect that it is either i)impossible or ii) very difficult. Please assist. Thanks.

  Read the article

• C header file won't compile with C, but will with C++.

  - by Leif Andersen

  I have the following chunk of a header file BKE_mesh.h: /* Connectivity data */ typedef struct IndexNode { struct IndexNode *next, *prev; int index; } IndexNode; void create_vert_face_map(ListBase **map, IndexNode **mem, const struct MFace *mface, const int totvert, const int totface); void create_vert_edge_map(ListBase **map, IndexNode **mem, const struct MEdge *medge, const int totvert, const int totedge); Note that the header file was prepared for the possibility of being used in a C++ file, as it had: #ifdef __cplusplus extern "C" { #endif at the top of the file, and the needed finish at the bottom. But the class implementing it was written in C. Next, whenever I try to #include the header file, I get an odd error. If the file has a .cpp extension, it compiles just fine, no complaints whatsoever. However, if I do: #include "BKE_mesh.h" inside of a file with a .c extension, I get the following errors: expected ')' before '*' token for the two last functions, in specific, the variable: ListBase **map in both classes. (Note that earlier in the header file, it declared, but not defined ListBase). So, my question is: why is this valid C++ code, but not C code? Thank you.

  Read the article

• c# finding matching words in table column using Linq2Sql

  - by David Liddle

  I am trying to use Linq2Sql to return all rows that contain values from a list of strings. The linq2sql class object has a string property that contains words separated by spaces. public class MyObject { public string MyProperty { get; set; } } Example MyProperty values are: MyObject1.MyProperty = "text1 text2 text3 text4" MyObject2.MyProperty = "text2" For example, using a string collection, I pass the below list var list = new List<>() { "text2", "text4" } This would return both items in my example above as they both contain "text2" value. I attempted the following using the below code however, because of my extension method the Linq2Sql cannot be evaluated. public static IQueryable<MyObject> WithProperty(this IQueryable<MyProperty> qry, IList<string> p) { return from t in qry where t.MyProperty.Contains(p, ' ') select t; } I also wrote an extension method public static bool Contains(this string str, IList<string> list, char seperator) { if (String.IsNullOrEmpty(str) || list == null) return false; var splitStr = str.Split(new char[] { seperator }, StringSplitOptions.RemoveEmptyEntries); foreach (string s in splitStr) foreach (string l in list) if (String.Compare(s, l, true) == 0) return true; return false; } Any help or ideas on how I could achieve this?

  Read the article

• .htacces Rewrite Rule to Keep .php File Extensions

  - by user2672112

  I'm upgrading my static website that had .php extensions on the content pages. I've created my own simple cms which will start retrieving data from mysql database from now on, keeping the url structure same as the old once. The cms has get function to retrieve url structure from the database. Overall it started working fine with .html when i tested. But when i change the .html extension to .php in my .htaccess code the content pages starts reflecting "Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request." Here is my .htaccess code which i've used: RewriteBase / Options +FollowSymLinks RewriteEngine On RewriteRule ^([^?]*).php$ content.php?pid=$1 Perhaps there is a conflict, here is the code with .html extension that actually works fine. RewriteBase / Options +FollowSymLinks RewriteEngine On RewriteRule ^([^?]*).html$ content.php?pid=$1 So basically, content pages with .html are working & .php are not working. But i need my content pages to be with .php Please help. Thanks in advance... :)

  Read the article

• how to resize image

  - by saadan

  I am a little forgetful have made it many times and can not find the code from the last time I made it how do I get it to resize more than one picture i do like this Guid imageName; imageName = Guid.NewGuid(); string storePath = Server.MapPath("~") + "/MultipleUpload"; if (!Directory.Exists(storePath)) Directory.CreateDirectory(storePath); hif.PostedFile.SaveAs(storePath + "/" + Path.GetFileName(hif.PostedFile.FileName)); string tempPath = "Gallery"; string imgPath = "Galleryt"; string savePath = Path.Combine(Request.PhysicalApplicationPath, tempPath); string TempImagesPath = Path.Combine(savePath, imageName + hif.PostedFile.FileName); string imgSavePath = Path.Combine(Request.PhysicalApplicationPath, imgPath); string ProductImageNormal = Path.Combine(imgSavePath, "t__" + imageName + hif.PostedFile.FileName); string extension = Path.GetExtension(hif.PostedFile.FileName); switch (extension.ToLower()) { case ".png": goto case "Upload"; case ".gif": goto case "Upload"; case ".jpg": goto case "Upload"; case "Upload": hif.PostedFile.SaveAs(TempImagesPath); ImageTools.GenerateThumbnail(TempImagesPath, ProductImageNormal, 250, 350, true, "heigh"); Label1.Text = ""; break; }

  Read the article

• PHP - complete url parser help

  - by Mark

  I have been trying to find an effective url parser, php's own does not include subdomain or extension. On php.net a number of users had contributed and made this: function parseUrl($url) { $r = "^(?:(?P<scheme>\w+)://)?"; $r .= "(?:(?P<login>\w+):(?P<pass>\w+)@)?"; $r .= "(?P<host>(?:(?P<subdomain>[-\w\.]+)\.)?" . "(?P<domain>[-\w]+\.(?P<extension>\w+)))"; $r .= "(?::(?P<port>\d+))?"; $r .= "(?P<path>[\w/]*/(?P<file>\w+(?:\.\w+)?)?)?"; $r .= "(?:\?(?P<arg>[\w=&]+))?"; $r .= "(?:#(?P<anchor>\w+))?"; $r = "!$r!"; // Delimiters preg_match ( $r, $url, $out ); return $out; } Unfortunately it fails on paths with a '-' and I can't for the life of me workout how to amend it to accept '-' in the path name. Thanks

  Read the article

• AJAX filter MySQL results using checkboxes

  - by keepitnang

  I'm attempting to get to grips with displaying filterable MySQL data within a PHP page based on user checkbox selections. I have a database of domain names and the dates on which these will require renewal as per Nominet DAC information and I can get unfiltered data to display, but filtering results by domain extensions is proving tricky for me to accomplish. I should point out at this stage that I am a serious newcomer to many of the ideas I am trying to learn to work with here, so please be gentle. I have tried following some other articles on here also, but no dice. I have the following so far: HTML <input type="checkbox" class="extensions" name="extensions" value=".co.uk">.co.uk</input> <input type="checkbox" class="extensions" name="extensions" value=".org.uk">.org.uk</input> Script $('.extensions').live('click', function() { var all_boxes = $('.extensions'); var all_boxes_values = []; var i = 0; for (var i; i < all_boxes.length; i++) { if (all_boxes[i].checked) { all_boxes_values.push(all_boxes[i].value) } } var all_boxes_values_clean = all_boxes_values.join(", "); console.log(all_boxes_values_clean); $.get("sql-test.php", {q: all_boxes_values_clean}, function(result) { $("div#output").html(result); } )}); PHP $g = $_GET['q']; $extensionsql=""; $extension=1; if(isset($g)) { $extension=1; $param = "" . str_replace(",", "','", $_GET['q']) . ""; } And that's as far as I have gotten with my limited ability. What I would like to do next is search the column domainName for a string match and return the appropriate results to the user. Something to mimic something like the following but I'm not sure how to achieve it. Any help would be much appreciated: SELECT * FROM `refresh` WHERE `domainName` LIKE '%.co.uk%' AND renewalDate LIKE '%2012-06-30%' ORDER BY `domainName` ASC Thanks

  Read the article

• Is it legal to take sealed .NET framework class source and extend it?

  - by Giedrius

  To be short, I'm giving very specific example, but I'm interested in general situation. There is a FtpWebRequest class in .NET framework and it is missing some of new FTP operations, like MFCT. It is ok in a sense that this operation is still in draft mode, but it is not ok in a sense, that FtpWebRequest is sealed and there's no other way (at least I don't see it) to extend it with this new operation. Easiest way to do it would be take FtpWebRequest class source from .NET reference sources and extend it, in such way will be kept all the consistence in naming, implementation, etc. Question is how much legal it is? I won't sell this class as a product, I can publish my changes on web - nothing to hide here. If it is not legal, can I take this class source from mono and include in native .net project? Did you had similar case and how you solved it? Update: as long as extension method is offered, I'm pasting source from .NET framework which should show that extension methods are not the solution. So there's a property Method, where you can pass FTP command: public override string Method { get { return m_MethodInfo.Method; } set { if (String.IsNullOrEmpty(value)) { throw new ArgumentException(SR.GetString(SR.net_ftp_invalid_method_name), "value"); } if (InUse) { throw new InvalidOperationException(SR.GetString(SR.net_reqsubmitted)); } try { m_MethodInfo = FtpMethodInfo.GetMethodInfo(value); } catch (ArgumentException) { throw new ArgumentException(SR.GetString(SR.net_ftp_unsupported_method), "value"); } } } As you can see there FtpMethodInfo.GetMethodInfo(value) call in setter, which basically validates value against internal enum static array. Update 2: Checked mono implementation and it is not exact replica of native code + it does not implement some of the things.

  Read the article

• Serving .docx files through Php

  - by user275074

  Hi, I'm having issues when attempting to serve a .docx file using Php. When uploading the file I detect the file mime type and upload the file using the file with the correct extension based on the mime type; e.g. below: application/msword - doc application/vnd.openxmlformats-officedocument.wordprocessingml.document - docx When attempting to serve the files for download, I do the reverse in detecting the extension and serving based on the mime type e.g. public static function fileMimeType($extention) { if(!is_null($extention)) { switch($extention) { case 'txt': return 'text/plain'; break; case 'odt': return 'application/vnd.oasis.opendocument.text'; break; case 'doc': return 'application/msword'; break; case 'docx': return 'application/vnd.openxmlformats-officedocument.wordprocessingml.document'; break; case ('jpg' || 'jpeg'): return 'image/jpeg'; break; case 'png': return 'image/png'; break; case 'pdf': return 'application/pdf'; break; default: break; } } } All files appear to download correctly and open fine but when attempting to open a docx file, Word (on multiple files) throws a error stating the file is corrupt. Any ideas would be great, thanks.

  Read the article

• Convert enumerated records to php object

  - by Matt H

  I have a table containing a bunch of records like this: +-----------+--------+----------+ | extension | fwd_to | type | +-----------+--------+----------+ | 800 | 11111 | noanswer | | 800 | 12345 | uncond | | 800 | 22222 | unavail | | 800 | 54321 | busy | | 801 | 123 | uncond | +-----------+--------+----------+ etc The query looks like this: select fwd_to, type from forwards where extension='800'; Now I get back an array containing objects which look like the following when printed with Kohana::debug: (object) stdClass Object ( [fwd_to] => 11111 [type] => noanswer ) (object) stdClass Object ( [fwd_to] => 12345 [type] => uncond ) (object) stdClass Object ( [fwd_to] => 22222 [type] => unavail ) (object) stdClass Object ( [fwd_to] => 54321 [type] => busy ) What I'd like to do is convert this to an object of this form: (object) stdClass Object ( [busy] => 54321 [uncond] => 12345 [unavail] => 22222 [noanswer] => 11111 ) The reason being I want to then call json_encode on it. This will allow me to use jquery populate to populate a form. Is there a suggested way I can do this nicely? I'm fairly new to PHP and I'm sure this is easy but it's eluding me at the moment.

  Read the article

• Determine if a Range contains a value

  - by Brad Dwyer

  I'm trying to figure out a way to determine if a value falls within a Range in Swift. Basically what I'm trying to do is adapt one of the examples switch statement examples to do something like this: let point = (1, -1) switch point { case let (x, y) where (0..5).contains(x): println("(\(x), \(y)) has an x val between 0 and 5.") default: println("This point has an x val outside 0 and 5.") } As far as I can tell, there isn't any built in way to do what my imaginary .contains method above does. So I tried to extend the Range class. I ended up running into issues with generics though. I can't extend Range<Int> so I had to try to extend Range itself. The closest I got was this but it doesn't work since >= and <= aren't defined for ForwardIndex extension Range { func contains(val:ForwardIndex) -> Bool { return val >= self.startIndex && val <= self.endIndex } } How would I go about adding a .contains method to Range? Or is there a better way to determine whether a value falls within a range? Edit2: This seems to work to extend Range extension Range { func contains(val:T) -> Bool { for x in self { if(x == val) { return true } } return false } } var a = 0..5 a.contains(3) // true a.contains(6) // false a.contains(-5) // false I am very interested in the ~= operator mentioned below though; looking into that now.

  Read the article

• uploading images with the help of arrays and fetch errors

  - by bonny

  i use a script to upload a couple of images to a directory. the code works great in case of just one picture will be uploaded. if i like to upload two images or more and have an extension that is not accepted, the script will upload the one with the extension that is allowed to upload and shows the errormessage for the one who is not accepted. but the upload takes place. that's my first problem. second problem will be: in case of an errormessage i would like to display a message in which it is said, which of the images will be not allowed. i do not know how to fetch this one that has an unaccepted ending into a variable that i can echo to the errormessage. here is the code i use: if(!empty($_FILES['image']['tmp_name'])){ $allowed_extension = array('jpg', 'jpeg', 'png', 'bmp', 'tiff', 'gif'); foreach($_FILES['image']['name'] as $key => $array_value){ $file_name = $_FILES['image']['name'][$key]; $file_size = $_FILES['image']['size'][$key]; $file_tmp = $_FILES['image']['tmp_name'][$key]; $file_extension = strtolower(end(explode('.', $file_name))); if (in_array($file_extension, $allowed_extension) === false){ $errors[] = 'its an unaccepted format in picture $variable_that_count'; continue; } if ($file_size > 2097152){ $errors[] = 'reached maxsize of 2MB per file in picture $variable_that_count'; } if (count($errors) == 0){ $path = "a/b/c/"; $uploadfile = $path."/".basename($_FILES['image']['name'][$key]); if (move_uploaded_file($_FILES['image']['tmp_name'][$key], $uploadfile)){ echo "success."; } } } } hope it will be clear what i like to approach. if there is someone who could help out i really would appreciate. thanks a lot.

  Read the article

• How can I record and save flash video's with an H264 codec

  - by JimHendriks

  Right now I am working on an AIR 3.2 application which lets you stream a video to a Flash Media Server and saves it on a hard drive. This sequence works fine with the standard Sorenson codec but I want to use H.264 for my videos. I found lots example c ode and implemented it in my code, but when I record a video of myself I am unable to re-watch it afterwards. I found how to implement a H.264 encoding in a realeyes blog post here. My code is here. It saves the video as a .f4v file, but my browser (I've tried the latest versions of both Chrome and Firefox, with the latest Flash) and also VLC are unable to load the video. I also used a program called Movie Player which is able to open the file but can only show the first frame and the audio. Neither am I able to upload the video to YouTube because they do not support the file extension. Here is an example video file it saved: H264Test1.f4v. My question is: How do I stream and save the movie with a file extension that I am able to re-watch while using the H.264 codec?

  Read the article

• [^.] causing headache in RewriteRule

  - by Ollie2893

  I am struggling with a very basic regex problem in my .htaccess file that I hope someone may be able to shed some light on. The basic premise is that I would like to teach Apache to switch any .html extension into a .var extension. I had thought that the rule would be positively trivial: RewriteRule ^([^.]+)\.html$ $1.var But the [^.] part simply doesn't work. Bizarrely, it works like so RewriteRule ^([^A-Z]+)\.html$ $1.var I do not understand why this latter rule works. Assume I am looking for a file called "index.html" then $1 should match to "index." and the ".html" bit should actually fail to match. To widen the scope of the question slightly, I am actually racking my brain on how to implement a multi-lingual site. I don't like Apache's MultiView option because it forces upon me a flat directory structure with file extensions that aren't recognizable to many development tools. I could go the .var type-map route but am finding that the default config for Apache doesn't support this all that well either (hence my excursions into regex land). So while I am using mod_rewrite, I am thinking that I might go the whole hog: whenever a request for a name.html file is received and this file does not exist, check whether there exists a XX/name.html file instead, where "XX" is the language code according to the user's preferences. This would give me a neater directory structure, though it does perhaps not perform as well as the .var approach in a situation where the language preference of the user's browser is not supported in by my site (in which situation .var would substitute EN or similar). Any thoughts? Thanks.

  Read the article

• My java program seems to be skipping over the try{}, executing the catch{} and then throwing a NullPointerException. What should I do?

  - by Matt Bolopue

  I am writing a program that calculates the number of words, syllables, and sentences in any given text file. I don't need help finding those numbers, however my program (which currently should only find the number of words in the text file) will not import the text file even when I type in the name of the file correctly. The text file is in the same folder as the source code. Instead it tells me every time that what I typed in has the wrong file extension (see my catch{}) and then proceeds to throw a null pointer. I am at a loss for what could be causing it. Any suggestions? import java.io.*; import java.util.*; public class Reading_Lvl_Calc { /** * @param args */ public static void main(String[] args) { // TODO Auto-generated method stub int words = 0; String fileName; Scanner scan; Scanner keyread = new Scanner(System.in); System.out.println("Please enter a file name (or QUIT to exit)"); fileName = keyread.nextLine(); File doc = new File(fileName); //while(scan.equals(null)){ try { scan = new Scanner(doc); } catch(Exception e) { if(fileName.substring(fileName.indexOf(".")) != ".txt") System.out.println("I'm sorry, the file \"" + fileName + "\" has an invalid file extension."); else System.out.println("I am sorry, the file \"" + fileName + " \" cannot be found.\n The file must be in the same directory as this program"); scan = null; } // } while(scan.hasNext()){ words++; scan.next(); } System.out.println(words); } }

  Read the article

• Launching and Intent from file and mime type

  - by stonedonkey

  I've reviewed all the similar questions here, but I can't for the life of me figure out what I'm doing wrong. I've written an application that tries to launch various files, sort of a file browser, when a file is clicked it tries to launch the program based on it's associated MIME type or I want it to present the "Choose Application to Launch" dialog. Here's the code I'm using to launch: File file = new File(app.mediaPath() + "/" +_mediaFiles.get(position)); Intent myIntent = new Intent(android.content.Intent.ACTION_VIEW); String extension = android.webkit.MimeTypeMap.getFileExtensionFromUrl(Uri.fromFile(file).toString()); String mimetype = android.webkit.MimeTypeMap.getSingleton().getMimeTypeFromExtension(extension); myIntent.setDataAndType(Uri.fromFile(file),mimetype); startActivity(myIntent); This fails and generates a: android.content.ActivityNotFoundException: No Activity found to handle Intent { act=android.intent.action.VIEW dat=file:///file:/mnt/sdcard/roms/nes/Baseball_simulator.nes } Now if I install OI File Manager for instance, it opens instead of this error being thrown, and then if I click the same file from within in it, it launches the approriate dialogs. I have noticed that the MIME type for that particular file fails, but other mime types like .zip do return values. Am I missing something that when the MIME type is null to call a dialog that lets the user select? I've tried other variations of launching the app, including not setting the mime type and only using .setData with no success. The action I want to happen is, a user clicks a file, if it's associated with an application that app launches, if not, the user gets the "Complete action using" dialog with a list of apps. Thanks for any advice.

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >