Search Results

Search found 6195 results on 248 pages for 'phone'.

Page 215/248 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • Android - Launch Intent within ExpandableListView

    - by Ryan
    Hello, I'm trying to figure out if it is possible to launch an intent within an ExpandableListView. Basically one of the "Groups" is Phone Number and it's child is the number. I want the user to be able to click it and have it automatically call that number. Is this possible? How? Here is my code to populate the ExpandableListView using a Map called "data". ExpandableListView myList = (ExpandableListView) findViewById(R.id.myList); //ExpandableListAdapter adapter = new MyExpandableListAdapter(data); List<Map<String, String>> groupData = new ArrayList<Map<String, String>>(); List<List<Map<String, String>>> childData = new ArrayList<List<Map<String, String>>>(); Iterator it = data.entrySet().iterator(); while (it.hasNext()) { //Get the key name and value for it Map.Entry pair = (Map.Entry)it.next(); String keyName = (String) pair.getKey(); String value = pair.getValue().toString(); //Add the parents -- aka main categories Map<String, String> curGroupMap = new HashMap<String, String>(); groupData.add(curGroupMap); curGroupMap.put("NAME", keyName); //Add the child data List<Map<String, String>> children = new ArrayList<Map<String, String>>(); Map<String, String> curChildMap = new HashMap<String, String>(); children.add(curChildMap); curChildMap.put("NAME", value); childData.add(children); } // Set up our adapter mAdapter = new SimpleExpandableListAdapter( mContext, groupData, R.layout.exp_list_parent, new String[] { "NAME", "IS_EVEN" }, new int[] { R.id.rowText1, R.id.rowText2 }, childData, R.layout.exp_list_child, new String[] { "NAME", "IS_EVEN" }, new int[] { R.id.rowText3, R.id.rowText4} ); myList.setAdapter(mAdapter);

    Read the article

  • UIView rotation, modal view lanscape and portrait, parent fails to render

    - by Ben
    Hi everyone, I've hit a bit of a roadblock with something that I hope that someone in here can help me out with. I'll describe the 'state of play' first, and then what the issue is, so here goes; I have a series of view controllers that are chained together with a Navigation Controller (this works just fine), All of these view controllers support portrait mode only (by design), In one of the view controllers (the 'end' one actually) the user can click a table cell to pop up a modal view controller (using presentModalViewController(...) of course) This modal view controller supports portrait and landscape modes (and this works), When the user clicks the 'Done' button on this modal view controller we pop and pass control back to the parent view controller, however; If the user is in portrait mode when they click 'Done' then the parent displays itself just fine, If the user is in landscape mode when they click 'Done' then the parent displays a totally white, blank screen (that covers the whole screen). It is as if the controller does not know how to render in landscape and just doesn't bother. I'd like to be able to have this parent view render in portrait no matter what the orientation of the phone is when the user clicks the 'Done' button. Various forum posts suggest using the UIDevice method 'setOrientation' (but this is undocumented and will get our app rejected apparently). Another suggestion was to set the 'statusBarOrientation' to portrait in the 'viewWillAppear' method but that had no effect. So I am a bit stuck! Has any encountered anything like this before? If need be I can provide code, if that will help anyone diagnose the problem for me. Thanks in advance! Cheers, Ben

    Read the article

  • Implementing Autocompletion in iPhone UITextField for contacts in address book

    - by nacho4d
    Hi, I would like to have a UITextField or UITextView in where as I do some input, alternatives will appear something similar to when you type an address in Mail Application, alternatives appear down and is possible tap them so get a better input user interface.(since there is no need to type the complete word or address or phone number) I do know how to fetch data from Address Book framework, also how to input text in UITextField/UITextView and its delegates but I don't know what kind of structure to use for fetching and showing data as the user do his/her input. I know basic CoreData if this matters, I hope I can get some help. UPDATE (2010/3/10): I don't have problem make a native-like GUI but I am asking about the algorithm, does any body knows what kind algorithm is best for this thing? maybe some binary tree? Or should I just fetch data from coredata everytime? Thanks Ignacio UPDATE (2010/03/28): I've been very busy these days, so I have not tried UISearchResults but it seems fine to me. BUT I wonder was there a necessity of deletion of the wining answer? I don't think is fair my reputation went down and couldn't see the winning answer. ;(

    Read the article

  • Navigating through a sea of hype

    - by wouldLikeACrystalBall
    This is a vague, open question, so if you have no interest in these, please leave now. A few years ago it seemed everyone thought the death of desktop software was imminent. Web applications were the future. Everyone would move to cloud-based software-as-a-service systems, and developing applications for specific end-user platforms like Windows would soon become something of a ghetto. Joel's "How Microsoft Lost the API War" was but one of many such pieces sounding the death knell for this way of software development. Flash-forward to 2010, and the hype is all around mobile devices, particularly the iPhone. Software-as-a-Service vendors--even small ones such as YCombinator startups--go out of their way to build custom applications for the iPhone and other smart phone devices; applications that can be quite sophisticated, that run only on specific hardware and software architectures and are thus inherently incompatible. Now some of you are probably thinking, "Well, only the decline of desktop software was predicted; mobile devices aren't desktops." But the term was used by those predicting its demise to mean laptops also, and really any platform capable of running a browser. What was promised was a world where HTML and related standards would supplant native applications and their inherent difficulties. We would all code to the browser, not the OS. But here we are in 2010 with the AppStore bulging and development for the iPad just revving up. A few days ago, I saw someone on Hacker News claim that the future of computing was entirely in small, portable devices. Apparently the future is underpowered, requires dexterous thumbs and induces near-sightedness. How do those who so vehemently asserted one thing now assert the opposite with equal vehemence, without making even the slightest admission of error? And further, how are we as developers supposed to sift through all of this? I bought into the whole web-standards utopianism that was in vogue back in '06-'07 and now feel like it was a mistake. Is there some formula one can apply rather than a mere appeal to experience?

    Read the article

  • How to assign RelayCommand to Click or SelectedIndexChanges events?

    - by Hikari
    Hello, I'm just starting with MVVM light, but so far it allowed me to solve some of my issues. Infortunately I'm struggling with relatively sime issues in Silverlight. Let's assume the following button with EventToCommand: <i:Interaction.Triggers> <i:EventTrigger EventName="MouseEnter"> <GalaSoft_MvvmLight_Command:EventToCommand Command="{Binding UpdateAccountsCommand, Mode=OneWay}" CommandParameter="{Binding SelectedIndex, ElementName=lstLedgers}"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> How to assign this code to SelectedIndexChanged event? Futher issue - how to assign a command in C# code? The problem is as follows: I'm developing Windows Phone 7 app. Application Bar needs to be initiated in C# (as far as I know there is no xaml code for application bar at this stage). As a result I have no idea how to bind a command to a application bat button in from c#, now xaml. Thanks in advance your your help.

    Read the article

  • The best way to package iPhone/iPad static libraries?

    - by Derek Clarkson
    Hi everyone, I have a couple of static Phone/iPad libraries I an working on. The problem I am looking for advise on is the best way to package the libraries. My objective is to make it easy to use the libraries in other projects and include the correct one in a build with minimal problems. To make it more interesting I currently build 4 versions of each library as follows armv6/armv7 release (devices) i386 release (simulator) armv6/armv7 debug (devices) i386 debug (simulator) The difference between the release and debug versions is that the debug versions contain a lot of NSLog(...) code which enables people to see whats going on internally as an aid to debugging. Currently when I build the whole projects I arrange the libraries into two directories like this: release lib-device.a lib-simulator.a debug lib-device.a lib-simulator.a This works ok except that when include in projects, both paths are added to the library search path and switching a target from one to the other is a pain. Or alternatively I end up with two targets. The alternative I am thinking of is to change the directories like this: release device lib.a simulator lib.a debug device lib.a simulator lib.a In playing with XCode is appears that all xcode uses the lbrary references of a project for is to get the name of the library file, which it then looks up in the library paths. Thus by parameterising the library path with the current built type and target device, I can effectively auto switch. What do you guys think? Is there a better way to do this? ciao Derek

    Read the article

  • How can I encrypt CoreData contents on an iPhone

    - by James A. Rosen
    I have some information I'd like to store statically encrypted on an iPhone application. I'm new to iPhone development, some I'm not terribly familiar with CoreData and how it integrates with the views. I have the data as JSON, though I can easily put it into a SQLITE3 database or any other backing data format. I'll take whatever is easiest (a) to encrypt and (b) to integrate with the iPhone view layer. The user will need to enter the password to decrypt the data each time the app is launched. The purpose of the encryption is to keep the data from being accessible if the user loses the phone. For speed reasons, I would prefer to encrypt and decrypt the entire file at once rather than encrypting each individual field in each row of the database. Note: this isn't the same idea as Question 929744, in which the purpose is to keep the user from messing with or seeing the data. The data should be perfectly transparent when in use. Also note: I'm willing to use SQLCipher to store the data, but would prefer to use things that already exist on the iPhone/CoreData framework rather than go through the lengthy build/integration process involved.

    Read the article

  • open flash chart rails x-axis issue

    - by Jimmy
    Hey guys, I am using open flash chart 2 in my rails application. Everything is looking smooth except for the range on my x axis. I am creating a line to represent cell phone plan cost over a specific amount of usage and I'm generate 8 values, 1-5 are below the allowed usage while 6-8 are demonstrations of the cost for usage over the limit. The problem I'm encountering is how to set the range of the X axis in ruby on rails to something specific to the data. Right now the values being displayed are the indexes of the array that I'm giving. When I try to hand a hash to the values the chart doesn't even load at all. So basically I need help getting a way to set the data for my line properly so that it displays correctly, right now it is treating every value as if it represents the x value of the index of the array. Here is a screen shot which may be a better description than what I am saying: http://i163.photobucket.com/albums/t286/Xeno56/Screenshot.png Note that those values are correct just the range on the x-axis is incorrect, it should be something like 100, 200, 300, 400, 500, 600, 700 Code: y = YAxis.new y.set_range(0,100, 20) x_legend = XLegend.new("Usage") x_legend.set_style('{font-size: 20px; color: #778877}') y_legend = YLegend.new("Cost") y_legend.set_style('{font-size: 20px; color: #770077}') chart =OpenFlashChart.new chart.set_x_legend(x_legend) chart.set_y_legend(y_legend) chart.y_axis = y line = Line.new line.text = plan.name line.width = 2 line.color = '#006633' line.dot_size = 2 line.values = generate_data(plan) chart.add_element(line) def generate_data(plan) values = [] #generate below threshold numbers 5.times do |x| usage = plan.usage / 5 * x cost = plan.cost * 10 values << cost end #generate above threshold numbers 3.times do |x| usage = plan.usage + ((plan.usage / 5) * x) cost = plan.cost + (usage * plan.overage) values << cost end return values end

    Read the article

  • onPause/onResume activity issues

    - by Josh
    I have a small test application I am working on which has a timer that updates a textview to countdown from 100 to 0. That works fine, but now I am trying to pause the application if the user presses the back button on the phone and then restart the timer from where they left off when they reopen the app. Here is the code I am using: @Override public void onPause() { if(this._timer_time_remaining > 0) { this.timer.cancel(); } super.onPause(); Log.v("Pausing", String.format("Pausing with %d", this._timer_time_remaining)); } @Override public void onResume() { super.onResume(); Log.v("Resuming", String.format("Resuming with %d", this._timer_time_remaining)); if(this._timer_time_remaining > 0) { setContentView(R.layout.in_game); start_timer(this._timer_time_remaining); } } The start_timer() method creates a CountDownTimer which updates the textview in the onTick method and updates the this._timer_time_remaining int variable. CountDownTimer and _timer_time_remaining are both declared at the class level like this: private CountDownTimer timer; private int _timer_time_remaining; From the Log.v() prints I see that the _timer_time_remaining variable has the correct number of seconds stored when onPause is called, but it is set back to 0 when onResume starts. Why does the variable get reset? I thought that the application would continue to run in the background with the same values. Am I missing something? This is all declared in a class that extends Activity. Thanks in advance!

    Read the article

  • NSMutableURLRequest wont try to use 3G when 3G is not 'connected' in Reachability enumeration

    - by Kyle
    I won't bother posting any code because my code works fine when I launch Safari or something that turns on the 3G connection first. When I put it Airport mode, then put back OFF, I will get the behavior of a connection error saying No internet connection with NSMutableURLRequest. I've personally mailed apple about how the Ant gets turned on and off, and they said anything that uses their base CFSocketStream object will turn on the Ant, and I quote: "such as NSURLRequest".. BSD Sockets do not, just so everyone knows.. However, I assumed NSMutableURLRequest would fall into the category of 'Does', but it seems like it doesnt. It never succeeds for me when I cycle Airport or have the phone idle for a long time. It will ALWAYS succeed when I open any other network app first to turn the Ant on. Shall I be forced to do a dummy NSURLRequest call to turn this on; or has anyone been able to get this class working just fine? Remember this is just an implementation of NSMutableURLRequest to upload a file Async, and no other Network operations are performed anywhere; no ads, no version checks, no nothing.

    Read the article

  • Make a Crystal Report with data fetched from two differents tables

    - by Selom
    Hi, Im using vb.net and I need to fetch data from two different tables and display it in form of report. These are the schemas and data of my two tables: CREATE TABLE personal_details (staff_ID integer PRIMARY KEY, title varchar(10), fn varchar(250), ln varchar(250), mn varchar(250), dob varchar(50), hometown varchar(250), securityno varchar(50), phone varchar(15), phone2 varchar(15), phone3 varchar(15), email varchar(250), address varchar(300), confirmation varchar(50), retirement varchar(50), designation varchar(250), region varchar(250)); INSERT INTO personal_details VALUES(1,'Mr.','Selom','AMOUZOU','Kokou','Sunday, March 28, 2010','Ho',7736,'024-747-4883','277-383-8383','027-838-3837','[email protected]','Lapaz Kum Hotel','Sunday, March 28, 2010','Sunday, March 28, 2010','Designeur','Brong Ahafo'); CREATE TABLE training( training_ID integer primary key NOT NULL, staff_ID varchar(100), training_level varchar (60), school_name varchar(100), start_date varchar(100), end_date varchar(100)); INSERT INTO training VALUES(1,1,'Primary School','New School','Feb 1955','May 1973'); INSERT INTO training VALUES(2,1,'Middle/JSS','Ipmc','Feb 1955','May 1973'); Im trying to fetch and display data from the tables above the following way: Dim rpt As New CrystalReport1() Dim da As New SQLiteDataAdapter Dim ds As New presbydbDataSet ds.EnforceConstraints = False If conn.State = ConnectionState.Closed Then conn.Open() End If Dim cmd As New SQLiteCommand("SELECT p.fn, t.training_level FROM personal_details p INNER JOIN training t ON p.staff_ID = t.staff_ID", conn) cmd.ExecuteNonQuery() da.SelectCommand = cmd da.Fill(ds) rpt.SetDataSource(ds) CrystalReportViewer1.ReportSource = rpt conn.Close() My problem is that nothing displays on the report unless I take off either the training fields or the personal_details fields from the report. Need your help. Thanks

    Read the article

  • Only first UIView added view addSubview shows correct orientation

    - by Brian Underwood
    I've got three ViewControllers set up to handle three views. The problem that I'm having is that in the simulator the orientation is LandscapeRight (which is what I want), and the first view shows up correctly in that landscape view, but when I move onto the second and third views, they show up rotated 90 degrees counter-clockwise with the upper-left corner of the view in the lower left corner of the phone's screen. I've been trying to debug this for a few days and the closest that I've gotten to a clue is tracing it the following way: The following is in my app delegate's applicationDidFinishLaunching: NSLog(@"1"); [window addSubview:welcomeController.view]; NSLog(@"2"); [window addSubview:goalController.view]; NSLog(@"3"); [window addSubview:planningController.view]; NSLog(@"4"); [window bringSubviewToFront:welcomeController.view]; NSLog(@"5"); Each of my ViewControllers implement something similar to the following (the only change being the controller's name switched out in the string passed to NSLog): - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations NSLog(@"called for WelcomeController"); return (interfaceOrientation == UIInterfaceOrientationLandscapeRight); } With that, I get the following output on the Console: a called for WelcomeController called for WelcomeController called for WelcomeController called for WelcomeController 2 called for GoalController 3 called for PlanningController 4 5 I find it interesting that shouldAutorotateToInterfaceOrientation is called 4 times for the first view that's added, while the other two only get called once. I expect that this is probably because it's got to do some setup at first (and I believe that the simulator starts off in portrait mode, so it's might be calling it while doing the rotation), but I find the correlation a bit suspicious. I've switched the order around so that the addSubview is called for the goalController first and the welcomeController second. In this case, it's the goalController which displays in the correct landscape orientation (it's normally the welcome controller). This would seem to eliminate my XIB files and the ViewControllers themselves. I'm not sure why the first view where addSubview is called is special. I also tried using insertSubview at index 0 with the same results.

    Read the article

  • ListField with image In Blackberry JDE

    - by Karthick
    I use the following code to retrieve image from the phone or SDCard and I use that image in to my ListField. It gives the output but it takes very Long time to produce the screen. How to solve this problem ?? Can any one help me?? Thanks in advance!!! String text = fileholder.getFileName(); try{ String path="file:///"+fileholder.getPath()+text; //path=”file:///SDCard/BlackBerry/pictures/image.bmp” InputStream inputStream = null; //Get File Connection FileConnection fileConnection = (FileConnection) Connector.open(path); inputStream = fileConnection.openInputStream(); ByteArrayOutputStream baos = new ByteArrayOutputStream(); int j = 0; while((j=inputStream.read()) != -1) { baos.write(j); } byte data[] = baos.toByteArray(); inputStream.close(); fileConnection.close(); //Encode and Resize image EncodedImage eImage = EncodedImage.createEncodedImage(data,0,data.length); int scaleFactorX = Fixed32.div(Fixed32.toFP(eImage.getWidth()), Fixed32.toFP(180)); int scaleFactorY = Fixed32.div(Fixed32.toFP(eImage.getHeight()), Fixed32.toFP(180)); eImage=eImage.scaleImage32(scaleFactorX, scaleFactorY); Bitmap bitmapImage = eImage.getBitmap(); graphics.drawBitmap(0, y+1, 40, 40,bitmapImage, 0, 0); graphics.drawText(text, 25, y,0,width); } catch(Exception e){}

    Read the article

  • iPhone openGLES performance tuning

    - by genesys
    Hey there! I'm trying now for quite a while to optimize the framerate of my game without really making progress. I'm running on the newest iPhone SDK and have a iPhone 3G 3.1.2 device. I invoke arround 150 drawcalls, rendering about 1900 Triangles in total (all objects are textured using two texturelayers and multitexturing. most textures come from the same textureAtlasTexture stored in pvrtc 2bpp compressed texture). This renders on my phone at arround 30 fps, which appears to me to be way too low for only 1900 triangles. I tried many things to optimize the performance, including batching together the objects, transforming the vertices on the CPU and rendering them in a single drawcall. this yelds 8 drawcalls (as oposed to 150 drawcalls), but performance is about the same (fps drop to arround 26fps) I'm using 32byte vertices stored in an interleaved array (12bytes position, 12bytes normals, 8bytes uv). I'm rendering triangleLists and the vertices are ordered in TriStrip order. I did some profiling but I don't really know how to interprete it. instruments-sampling using Instruments and Sampling yelds this result: http://neo.cycovery.com/instruments_sampling.gif telling me that a lot of time is spent in "mach_msg_trap". I googled for it and it seems this function is called in order to wait for some other things. But wait for what?? instruments-openGL instruments with the openGL module yelds this result: http://neo.cycovery.com/intstruments_openglES_debug.gif but here i have really no idea what those numbers are telling me shark profiling: profiling with shark didn't tell me much either: http://neo.cycovery.com/shark_profile_release.gif the largest number is 10%, spent by DrawTriangles - and the whole rest is spent in very small percentage functions Can anyone tell me what else I could do in order to figure out the bottleneck and could help me to interprete those profiling information? Thanks a lot!

    Read the article

  • Internet Explorer 7 Bugs - incorrect display OR dead links

    - by ClarkeyBoy
    Hi, I recently launched a website I have been developing over the past year - http://Live.heritageartpapers.co.uk/. My dad, who owns the company, had a phone call today saying it doesnt display properly in IE7. Bug #1: The header and footer are both in a div, whereas the content is in a table between the two divs. Reportedly the content (table) sometimes (not always, according to IETester) displays below the footer, but the footer still displays where it is supposed to (ie there is a massive gap where the content should fit). Bug #2: When the content does display in the correct place, all the links on the page are dead - click on them and nothing happens. As you can see if you view it in Firefox (the version I am using is 3.6), the links in the left hand menu turn orange on mouseover. However they do not even do this in IE7. Note that they do turn orange and do work if the content is displayed below the footer. I cant see why its happening - according to IETester, the IE7 interpreted source code has all the tags capitalised and many quotes removed (for example for the id attribute on most, if not all, tags) but I doubt this could cause the above bugs, could it? My question is whether anyone has ever seen any of these problems before, and/or has a solution to any of these problems?? I currently do not have the application open, but will post any relevant code in a few minutes. Alternatively just use view source. Many thanks in advance. Regards, Richard Clarke

    Read the article

  • Android USB driver for Xperia X10a

    - by mlohbihler
    I've been trying for a couple hours now, and have hit all of the sites Google found, but i cannot get the Android USB driver on my XP box to talk to my new Xperia X10a. I found the lines that some kind soul posted, and has been syndicated repeated, but they don't work for me. The idea is to add them to the Google.NTx86 and Google.NTamd64 sections of the android_winusb.inf file: ;Xperia X10 %SingleAdbInterface% = USB_Install, USB\VID_0FCE&PID_E12E %CompositeAdbInterface% = USB_Install, USB\VID_0FCE&PID_E12E&MI_01 I tried a number of variations of the first line, including "Sony Ericsson X10a", which is what XP shows me in both the "found new hardware" wizard and the device manager, but no luck. The result is always the same. Here are my steps: Plug in the phone via USB "found new hardware wizard" appears Choose "No, not this time" and "next" Choose "Install from a list or specific location..." and "next" Choose "Search for best driver...", check "Include this location...", and browse for the "usb_driver" folder in the Android SDK installation. Click "next" It does a quick search and then says "Cannot install this hardware", "... because the wizard cannot find the necessary software". I've tried more things that i can recall now, including deleting registry entries, but it just won't work. Any help would be appreciated at this point. Regards, m@

    Read the article

  • Phonegap Screenshot plugin in Cordova 2.0.0

    - by ObjectiveJ
    I have set up the screenshot plugin from github, located here: https://github.com/phonegap/phonegap-plugins/tree/master/Android/Screenshot I set it up as instructed and with 1.8.1 of cordova. It worked and the screenshot was saved to the phone. However it fails with cordova 2.0.0. Screenshot.java code: https://github.com/phonegap/phonegap-plugins/blob/master/Android/Screenshot/src/org/apache/cordova/Screenshot.java Screenshot.js code: https://github.com/phonegap/phonegap-plugins/blob/master/Android/Screenshot/www/Screenshot.js Due to the advice of a very clever man called Simon MacDonald, I removed line 31 and 38 from the JS file shown above. However when I try to use the screenshot plugin with cordova 2.0.0 I receive these errors: ERROR: org.json.JSONException: Value undefined of type java.lang.String cannot be converted to JSONArray. Error: Status=8 Message=JSON error file:///android_asset/www/cordova-2.0.0.js: Line 938 : Error: Status=8 Message=JSON error Error: Status=8 Message=JSON error at file:///android_asset_/www/cordova-2.0.0.js:938 line 938 of the cordova.js is: // If error, then display error else { console.log("Error: Status="+v.status+" Message="+v.message); but im almost certain this is a compatibility error. Does anyone know a fix for this, or even a reason. Im abit lost. Any help is appreciated. I call the screenshot.js with this code: function takeScreenShot() { cordovaRef.exec("Screenshot.saveScreenshot"); } Any help massively appreciated.

    Read the article

  • How to check for server side update in iPhone application Web service request

    - by Nirmal
    Hello All.... I have kind of Listing application for iPhone application, which always calling a web service to my php server and fetching the data and displaying it onto iPhone screen. Now, the thing to consider in this scenario is, my iPhone application everytime requesting on the server and fetching the data. But now my requirement is like I want to replace following set of actions with above one : - Everytime when my application is launched in iPhone, it should check for the new data at the server`. - And if server replies "true" then only my iPhone application will made a request to fetch the data. - In case of "false", my iPhone application will display the data which is already cached in local phone memory. Now to implement this scenario at server side (which has php, mysql), I am planning with the following solution : Table : tblNewerData id newDataFlag == ============ 1 true Trigger : tgrUpdateNewData Above trigger will update the tblNewerData - newDataFlag field on Insert case of my main table. And every time my iPhone app will request for tblNewerData-newDataFlag field, and if it found true then only it will create new request, and if it founds false then the cached version of data will be displayed. So, I want to know that, is it the correct way to do so ? or else any other smart option available ? Thanks in advance.

    Read the article

  • Windows-mobile app won't run after being closed by Task Manager

    - by pithyless
    I've inherited some windows-mobile code that I've been bringing up-to-date. I've come across a weird bug, and I was hoping that even though a bit vague, maybe it will spark someone's memory: Running the app (which is basically a glorified Forms app with P/Invoke gps code), I switch to the task manager, and close the app via End Task. Seems to exit fine (no errors and disappears from Task Manager). Unfortunately, the app refuses to start a second time until I reboot the phone or reinstall the CAB. What's worse: this bug is reproducible on a HTC Diamond, but works fine (ie. can run again after EndTask) on an HTC HD2. The only thing I can think of is some kind of timing race between a Dispose() and the Task Manager. Any ideas? I'm also thinking of a workaround - I do have a working "Exit Application" routine that correctly cleans up the app; can I catch the EndTask event in the c# code in order to complete a proper cleanup? Maybe I'm just missing the pain point... all ideas welcome :)

    Read the article

  • Changing UITableViewCell textLabel background color to clear

    - by SorinA.
    In my app i have a table view with customViewCells. i subclassed the UITableViewCell class and added an image that will load async and for the text i use cell.textLabel.text = @"someThext". for the cells the background color is set alternatively to [UIColor darkGrayColor] and whitecolor. When i run the app in the simulator and on the pone the textLabel of the cell has the background white. I want to set it to be clear, because i want the background color of the cell to be full not a strip then white then another strip. in the init method of my custom cell i added hoping that the white will turn into red but it doesn't have any effect. [self.textLabel setBackgroundColor:[UIColor redColor]]; i tried also self.textLabel.backgroundColor = [UIColor redColor]; but this also didn't work...if i add a UILabel as a subview the background color of the label can be set..but i don't want to do that because when i rotate the phone i want my labels to auto enlarge... any ideas why setting the background color of cell.textLabel doesn't work? thank you

    Read the article

  • IPhone app with SSL client certs

    - by Pavel Georgiev
    I'm building an iphone app that needs to access a web service over https using client certificates. If I put the client cert (in pkcs12 format) in the app bundle, I'm able to load it into the app and make the https call (largely thanks to stackoverflow.com). However, I need a way to distribute the app without any certs and leave it to the user to provide his own certificate. I thought I would just do that by instructing the user to import the certificate in iphone's profiles (settings-general-profiles), which is what you get by opening a .p12 file in Mail.app and then I would access that item in my app. I would expect that the certificates in profiles are available through the keychain API, but I guess I'm wrong on that. 1) Is there a way to access a certificate that I've already loaded in iphone's profile in my app? 2) What other options I have for loading a user specified certificate in my app? The only thing I can come up with is providing some interface where the user can give an URL to his .p12 cerificate, which I can then load into the app's keychain for later use, but thats not exactly user-friednly. I'm looking for something that would allow the user to put the cert on phone (email it to himself) and then load it in my app.

    Read the article

  • Toggle Android emulator network traffic from emulator invocation

    - by highphi
    I'm working on scripts to manage large amounts of Android emulators and I need to disable all network traffic on some of them. Because I'm doing all of this on a headless server, I cannot use the F8 hotkey described on the emulater documentation. I'm currently routing the TCP traffic through a null proxy with by using emulator-arm ... -http-proxy 0.0.0.0:0 and this blocks the traffic that I want it to. I thought this was working well until I noticed some strange error messages while running my scripts. The console started outputting accept too many open files and checking the open files with lsof reveals numerous messages stating "can't identify protocol" ... emulator- 19463 username 19u sock 0,6 0t0 1976595845 can't identify protocol emulator- 19463 username 20u sock 0,6 0t0 1976595847 can't identify protocol ... The only "solution" I found to this is to kill all of the emulators and then wait until this limit is reached again, which is hardly a solution at all. Is there another way to do this while invoking the emulator? Am I incorrectly using the -htt-proxy switch to block the traffic? Other people found solutions to block traffic by manually doing this by using airplane mode, but this isn't feasible for me as I'm controlling emulators via scripts. I could send keyevents to the emulator with my script and turn the phone on in airplane mode, but I would prefer something more reliable than this.

    Read the article

  • Webservices on iPhone - wsdl2objc - Sample Code?

    - by markmcgookin
    I have recently downloaded the most recent build of this awesome tool WSDL2OBJC from google code here: http://code.google.com/p/wsdl2objc/ After a bit of tweaking and downloading the latest version of the trunk from the svn repo I got a version that created the code for a WSDL I am using and compiles great and actually installs on my phone! However, I'm not doing anything with it yet, because I am not really sure how to. There is very little in the way of sample code on the site, and there is a sample file in the project if you download it, but again it is very complicated and there are no real bits of documentation. Has anyone managed to successfully use this stuff? It seems SOOO powerful and useful but from a look around the Internet, no one knows how to use it. We (all) would love someone who has figured it out to post a simple project or detailed walk-through of implementing this so we can put the code that lots of people have worked hard on to good use. If anyone has found a blog entry or has this information it would be great to see! I am totally stuck... with no errors. I would love to know how to use this now that it's all compiled successfully!

    Read the article

  • Pythonic mapping of an array (Beginner)

    - by scott_karana
    Hey StackOverflow, I've got a question related to a beginner Python snippet I've written to introduce myself to the language. It's an admittedly trivial early effort, but I'm still wondering how I could have written it more elegantly. The program outputs NATO phoenetic readable versions of an argument, such "H2O" - "Hotel 2 Oscar", or (lacking an argument) just outputs the whole alphabet. I mainly use it for calling in MAC addresses and IQNs, but it's useful for other phone support too. Here's the body of the relevant portion of the program: #!/usr/bin/env python import sys nato = { "a": 'Alfa', "b": 'Bravo', "c": 'Charlie', "d": 'Delta', "e": 'Echo', "f": 'Foxtrot', "g": 'Golf', "h": 'Hotel', "i": 'India', "j": 'Juliet', "k": 'Kilo', "l": 'Lima', "m": 'Mike', "n": 'November', "o": 'Oscar', "p": 'Papa', "q": 'Quebec', "r": 'Romeo', "s": 'Sierra', "t": 'Tango', "u": 'Uniform', "v": 'Victor', "w": 'Whiskey', "x": 'Xray', "y": 'Yankee', "z": 'Zulu', } if len(sys.argv) < 2: for n in nato.keys(): print nato[n] else: # if sys.argv[1] == "-i" # TODO for char in sys.argv[1].lower(): if char in nato: print nato[char], else: print char, As I mentioned, I just want to see suggestions for a more elegant way to code this. My first guess was to use a list comprehension along the lines of [nato[x] for x in sys.argv[1].lower() if x in nato], but that doesn't allow me to output any non-alphabetic characters. My next guess was to use map, but I couldn't format any lambdas that didn't suffer from the same corner case. Any suggestions? Maybe something with first-class functions? Messing with Array's guts? This seems like it could almost be a Code Golf question, but I feel like I'm just overthinking :)

    Read the article

  • AudioQueue ate my buffer (first 15 milliseconds of it)

    - by iter
    I am generating audio programmatically. I hear gaps of silence between my buffers. When I hook my phone to a scope, I see that the first few samples of each buffer are missing, and in their place is silence. The length of this silence varies from almost nothing to as much as 20 ms. My first thought is that my original callback function takes too much time. I replace it with the shortest one possible--it re-renqueues the same buffer over and over. I observe the same behavior. AudioQueueRef aq; AudioQueueBufferRef aq_buffer; AudioStreamBasicDescription asbd; void aq_callback (void *aqData, AudioQueueRef inAQ, AudioQueueBufferRef inBuffer) { OSStatus s = AudioQueueEnqueueBuffer(aq, aq_buffer, 0, NULL); } void aq_init(void) { OSStatus s; asbd.mSampleRate = AUDIO_SAMPLES_PER_S; asbd.mFormatID = kAudioFormatLinearPCM; asbd.mFormatFlags = kLinearPCMFormatFlagIsSignedInteger | kAudioFormatFlagIsPacked; asbd.mBytesPerPacket = 1; asbd.mFramesPerPacket = 1; asbd.mBytesPerFrame = 1; asbd.mChannelsPerFrame = 1; asbd.mBitsPerChannel = 8; asbd.mReserved = 0; int PPM_PACKETS_PER_SECOND = 50; // one buffer is as long as one PPM frame int BUFFER_SIZE_BYTES = asbd.mSampleRate/PPM_PACKETS_PER_SECOND*asbd.mBytesPerFrame; s = AudioQueueNewOutput(&asbd, aq_callback, NULL, CFRunLoopGetCurrent(), kCFRunLoopCommonModes, 0, &aq); s = AudioQueueAllocateBuffer(aq, BUFFER_SIZE_BYTES, &aq_buffer); // put samples in the buffer buffer_data(my_data, aq_buffer); s = AudioQueueStart(aq, NULL); s = AudioQueueEnqueueBuffer(aq, aq_buffer, 0, NULL); }

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >