Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 215/904 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • MacBook Pro Late 2009 SATA Resets, Slowness (Is my motherboard dying on both machines?)

    - by A Student at a University
    My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. Some, but not all, resets correlate with AC power connects and disconnects. I don't think the warnings do. (How do I tell?) What are these errors? What causes them? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16[ 0.792047] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X 02:37:16[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16[ 0.792111] ahci 0000:00:0b.0: setting latency timer to 64 02:37:16[ 0.813473] scsi0 : ahci 02:37:16[ 0.823340] scsi1 : ahci 02:37:16[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16[ 1.229570] ata2.00: configured for UDMA/133 02:37:16[ 1.240120] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.240123] ata2: irq_stat 0x00000040, connection status changed 02:37:16[ 1.240127] ata2: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.240133] ata2: hard resetting link 02:37:16[ 1.260738] ata1.00: configured for UDMA/133 02:37:16[ 1.280111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.280114] ata1: irq_stat 0x00000040, connection status changed 02:37:16[ 1.280118] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.280122] ata1: hard resetting link 02:37:16[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.994215] ata2.00: configured for UDMA/133 02:37:16[ 1.994220] ata2: EH complete 02:37:16[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 2.090773] ata1.00: configured for UDMA/133 02:37:16[ 2.090778] ata1: EH complete 02:37:16[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16[ 2.091165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 02:37:16[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16[ 2.091582] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 02:37:16[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25[ 19.641532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.641532] ata1: irq_stat 0x00000040, connection status changed 02:37:25[ 19.641532] ata1: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.641533] ata1: hard resetting link 02:37:25[ 19.642076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.642078] ata2: irq_stat 0x00000040, connection status changed 02:37:25[ 19.642081] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.642084] ata2: hard resetting link 02:37:26[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.396697] ata2.00: configured for UDMA/133 02:37:26[ 20.396703] ata2: EH complete 02:37:26[ 20.451491] ata1.00: configured for UDMA/133 02:37:26[ 20.451498] ata1: EH complete 02:37:30[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30[ 24.627236] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:37:30[ 24.627240] ata1: irq_stat 0x00000040, connection status changed 02:37:30[ 24.627242] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.627246] ata1: hard resetting link 02:37:30[ 24.632241] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:30[ 24.632244] ata2: irq_stat 0x00000040, connection status changed 02:37:30[ 24.632247] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.632250] ata2: hard resetting link 02:37:31[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.386782] ata2.00: configured for UDMA/133 02:37:31[ 25.386788] ata2: EH complete 02:37:31[ 25.431668] ata1.00: configured for UDMA/133 02:37:31[ 25.431674] ata1: EH complete 02:45:54[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622568] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:55[ 529.622572] ata1: irq_stat 0x00400040, connection status changed 02:45:55[ 529.622576] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622583] ata1: hard resetting link 02:45:55[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622613] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:55[ 529.622616] ata2: irq_stat 0x00000040, connection status changed 02:45:55[ 529.622620] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622624] ata2: hard resetting link 02:45:56[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.384305] ata2.00: configured for UDMA/133 02:45:56[ 530.384314] ata2: EH complete 02:45:56[ 530.399225] ata1.00: configured for UDMA/133 02:45:56[ 530.399233] ata1: EH complete 02:45:58[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58[ 532.590968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5840000 action 0xe frozen t4 02:45:58[ 532.590973] ata1: irq_stat 0x00000040, connection status changed 02:45:58[ 532.590977] ata1: SError: { CommWake LinkSeq TrStaTrns DevExch } 02:45:58[ 532.590983] ata1: hard resetting link 02:45:58[ 532.591034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:45:58[ 532.591037] ata2: irq_stat 0x00000040, connection status changed 02:45:58[ 532.591041] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:58[ 532.591045] ata2: hard resetting link 02:45:59[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.344416] ata2.00: configured for UDMA/133 02:45:59[ 533.344424] ata2: EH complete 02:45:59[ 533.360839] ata1.00: configured for UDMA/133 02:45:59[ 533.360847] ata1: EH complete 02:45:59[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59[ 533.660117] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:59[ 533.660122] ata2: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660126] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660132] ata2: hard resetting link 02:45:59[ 533.660141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:59[ 533.660143] ata1: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660147] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660151] ata1: hard resetting link 02:46:00[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.416768] ata2.00: configured for UDMA/133 02:46:00[ 534.416777] ata2: EH complete 02:46:00[ 534.431396] ata1.00: configured for UDMA/133 02:46:00[ 534.431401] ata1: EH complete 02:46:03[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03[ 537.585992] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:03[ 537.585996] ata1: irq_stat 0x00000040, connection status changed 02:46:03[ 537.585999] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586002] ata1: hard resetting link 02:46:03[ 537.586028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:46:03[ 537.586030] ata2: irq_stat 0x00000040, connection status changed 02:46:03[ 537.586033] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586036] ata2: hard resetting link 02:46:04[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.334389] ata2.00: configured for UDMA/133 02:46:04[ 538.334398] ata2: EH complete 02:46:04[ 538.343511] ata1.00: configured for UDMA/133 02:46:04[ 538.343519] ata1: EH complete 02:46:04[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:46:04[ 538.540148] ata1: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540153] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540159] ata1: hard resetting link 02:46:04[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540207] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:46:04[ 538.540211] ata2: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540215] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540220] ata2: hard resetting link 02:46:05[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.294100] ata2.00: configured for UDMA/100 02:46:05[ 539.294106] ata2: EH complete 02:46:05[ 539.314125] ata1.00: configured for UDMA/100 02:46:05[ 539.314132] ------------[ cut here ]------------ 02:46:05[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05[ 539.314144] Hardware name: MacBookPro5,3 02:46:05[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05[ 539.314224] Call Trace: 02:46:05[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05[ 539.314296] ata1: EH complete 02:46:12[ 547.040091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen 02:46:12[ 547.040098] ata1.00: failed command: IDENTIFY DEVICE 02:46:12[ 547.040106] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in 02:46:12[ 547.040108] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) 02:46:12[ 547.040111] ata1.00: status: { DRDY } 02:46:12[ 547.040117] ata1: hard resetting link 02:46:13[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13[ 547.408430] ata1.00: configured for UDMA/100 02:46:13[ 547.408438] ------------[ cut here ]------------ 02:46:13[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13[ 547.408451] Hardware name: MacBookPro5,3 02:46:13[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13[ 547.408531] Call Trace: 02:46:13[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13[ 547.408620] ata1: EH complete 02:46:13[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13[ 547.738204] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:13[ 547.738208] ata1: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738212] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738218] ata1: hard resetting link 02:46:13[ 547.738262] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:13[ 547.738265] ata2: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738269] ata2: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738274] ata2: hard resetting link 02:46:14[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.486809] ata2.00: configured for UDMA/100 02:46:14[ 548.486818] ata2: EH complete 02:46:14[ 548.498998] ata1.00: configured for UDMA/33 02:46:14[ 548.499004] ata1: EH complete 02:46:18[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18[ 552.529674] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529678] ata1: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529680] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529684] ata1: hard resetting link 02:46:18[ 552.529716] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529718] ata2: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529720] ata2: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529723] ata2: hard resetting link 02:46:19[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.284141] ata2.00: configured for UDMA/100 02:46:19[ 553.284150] ata2: EH complete 02:46:19[ 553.301629] ata1.00: configured for UDMA/33 02:46:19[ 553.301637] ata1: EH complete

    Read the article

  • MacBook Pro Late 2009 SATA Resets, Slowness (Is my motherboard dying on both machines?)

    - by A Student at a University
    My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. Some, but not all, resets correlate with AC power connects and disconnects. I don't think the warnings do. (How do I tell?) What are these errors? What causes them? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16[ 0.792047] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X 02:37:16[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16[ 0.792111] ahci 0000:00:0b.0: setting latency timer to 64 02:37:16[ 0.813473] scsi0 : ahci 02:37:16[ 0.823340] scsi1 : ahci 02:37:16[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16[ 1.229570] ata2.00: configured for UDMA/133 02:37:16[ 1.240120] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.240123] ata2: irq_stat 0x00000040, connection status changed 02:37:16[ 1.240127] ata2: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.240133] ata2: hard resetting link 02:37:16[ 1.260738] ata1.00: configured for UDMA/133 02:37:16[ 1.280111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.280114] ata1: irq_stat 0x00000040, connection status changed 02:37:16[ 1.280118] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.280122] ata1: hard resetting link 02:37:16[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.994215] ata2.00: configured for UDMA/133 02:37:16[ 1.994220] ata2: EH complete 02:37:16[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 2.090773] ata1.00: configured for UDMA/133 02:37:16[ 2.090778] ata1: EH complete 02:37:16[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16[ 2.091165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 02:37:16[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16[ 2.091582] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 02:37:16[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25[ 19.641532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.641532] ata1: irq_stat 0x00000040, connection status changed 02:37:25[ 19.641532] ata1: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.641533] ata1: hard resetting link 02:37:25[ 19.642076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.642078] ata2: irq_stat 0x00000040, connection status changed 02:37:25[ 19.642081] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.642084] ata2: hard resetting link 02:37:26[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.396697] ata2.00: configured for UDMA/133 02:37:26[ 20.396703] ata2: EH complete 02:37:26[ 20.451491] ata1.00: configured for UDMA/133 02:37:26[ 20.451498] ata1: EH complete 02:37:30[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30[ 24.627236] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:37:30[ 24.627240] ata1: irq_stat 0x00000040, connection status changed 02:37:30[ 24.627242] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.627246] ata1: hard resetting link 02:37:30[ 24.632241] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:30[ 24.632244] ata2: irq_stat 0x00000040, connection status changed 02:37:30[ 24.632247] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.632250] ata2: hard resetting link 02:37:31[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.386782] ata2.00: configured for UDMA/133 02:37:31[ 25.386788] ata2: EH complete 02:37:31[ 25.431668] ata1.00: configured for UDMA/133 02:37:31[ 25.431674] ata1: EH complete 02:45:54[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622568] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:55[ 529.622572] ata1: irq_stat 0x00400040, connection status changed 02:45:55[ 529.622576] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622583] ata1: hard resetting link 02:45:55[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622613] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:55[ 529.622616] ata2: irq_stat 0x00000040, connection status changed 02:45:55[ 529.622620] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622624] ata2: hard resetting link 02:45:56[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.384305] ata2.00: configured for UDMA/133 02:45:56[ 530.384314] ata2: EH complete 02:45:56[ 530.399225] ata1.00: configured for UDMA/133 02:45:56[ 530.399233] ata1: EH complete 02:45:58[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58[ 532.590968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5840000 action 0xe frozen t4 02:45:58[ 532.590973] ata1: irq_stat 0x00000040, connection status changed 02:45:58[ 532.590977] ata1: SError: { CommWake LinkSeq TrStaTrns DevExch } 02:45:58[ 532.590983] ata1: hard resetting link 02:45:58[ 532.591034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:45:58[ 532.591037] ata2: irq_stat 0x00000040, connection status changed 02:45:58[ 532.591041] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:58[ 532.591045] ata2: hard resetting link 02:45:59[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.344416] ata2.00: configured for UDMA/133 02:45:59[ 533.344424] ata2: EH complete 02:45:59[ 533.360839] ata1.00: configured for UDMA/133 02:45:59[ 533.360847] ata1: EH complete 02:45:59[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59[ 533.660117] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:59[ 533.660122] ata2: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660126] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660132] ata2: hard resetting link 02:45:59[ 533.660141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:59[ 533.660143] ata1: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660147] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660151] ata1: hard resetting link 02:46:00[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.416768] ata2.00: configured for UDMA/133 02:46:00[ 534.416777] ata2: EH complete 02:46:00[ 534.431396] ata1.00: configured for UDMA/133 02:46:00[ 534.431401] ata1: EH complete 02:46:03[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03[ 537.585992] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:03[ 537.585996] ata1: irq_stat 0x00000040, connection status changed 02:46:03[ 537.585999] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586002] ata1: hard resetting link 02:46:03[ 537.586028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:46:03[ 537.586030] ata2: irq_stat 0x00000040, connection status changed 02:46:03[ 537.586033] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586036] ata2: hard resetting link 02:46:04[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.334389] ata2.00: configured for UDMA/133 02:46:04[ 538.334398] ata2: EH complete 02:46:04[ 538.343511] ata1.00: configured for UDMA/133 02:46:04[ 538.343519] ata1: EH complete 02:46:04[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:46:04[ 538.540148] ata1: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540153] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540159] ata1: hard resetting link 02:46:04[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540207] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:46:04[ 538.540211] ata2: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540215] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540220] ata2: hard resetting link 02:46:05[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.294100] ata2.00: configured for UDMA/100 02:46:05[ 539.294106] ata2: EH complete 02:46:05[ 539.314125] ata1.00: configured for UDMA/100 02:46:05[ 539.314132] ------------[ cut here ]------------ 02:46:05[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05[ 539.314144] Hardware name: MacBookPro5,3 02:46:05[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05[ 539.314224] Call Trace: 02:46:05[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05[ 539.314296] ata1: EH complete 02:46:12[ 547.040091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen 02:46:12[ 547.040098] ata1.00: failed command: IDENTIFY DEVICE 02:46:12[ 547.040106] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in 02:46:12[ 547.040108] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) 02:46:12[ 547.040111] ata1.00: status: { DRDY } 02:46:12[ 547.040117] ata1: hard resetting link 02:46:13[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13[ 547.408430] ata1.00: configured for UDMA/100 02:46:13[ 547.408438] ------------[ cut here ]------------ 02:46:13[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13[ 547.408451] Hardware name: MacBookPro5,3 02:46:13[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13[ 547.408531] Call Trace: 02:46:13[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13[ 547.408620] ata1: EH complete 02:46:13[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13[ 547.738204] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:13[ 547.738208] ata1: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738212] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738218] ata1: hard resetting link 02:46:13[ 547.738262] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:13[ 547.738265] ata2: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738269] ata2: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738274] ata2: hard resetting link 02:46:14[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.486809] ata2.00: configured for UDMA/100 02:46:14[ 548.486818] ata2: EH complete 02:46:14[ 548.498998] ata1.00: configured for UDMA/33 02:46:14[ 548.499004] ata1: EH complete 02:46:18[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18[ 552.529674] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529678] ata1: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529680] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529684] ata1: hard resetting link 02:46:18[ 552.529716] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529718] ata2: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529720] ata2: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529723] ata2: hard resetting link 02:46:19[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.284141] ata2.00: configured for UDMA/100 02:46:19[ 553.284150] ata2: EH complete 02:46:19[ 553.301629] ata1.00: configured for UDMA/33 02:46:19[ 553.301637] ata1: EH complete

    Read the article

  • How to fix network connection dead on startup, but okay after disable/enable?

    - by bill weaver
    on Startup When my system starts up, the internet connection is dead. This causes various problems with startup items such as updates and auto-start programs failing. However, the connection is fine after going into Network and Sharing, Change adapter settings, then disabling and re-enabling the adapter. Any suggestions on why this is happening and how to fix it? System summary: Windows 7, 64 bit, Realtek PCIe GBE Family Controller, Linksys WRT610N router, Sci Atlanta cable modem.

    Read the article

  • How to route certain applications through a VPN and others to use my 'standard' connection in OSX 10.6?

    - by Alfie
    I am currently working abroad and use my company's VPN for FTP and some browsing. This is a relatively slow connection and while it is suitable for those VPN necessities; much of my other internet usage can be done without the VPN at a much higher speed. Is there a way to tell Safari and my FTP software to use the VPN and for all other connections to go directly to the internet. I am currently using OSX's Network Prefs for running my VPN connection. Ta

    Read the article

  • (Serving PHP) Does Apache2 will create new thread on every connection?

    - by apasajja
    Based on many online sources, in serving static files, Apache2 will create new thread on every different connection... results in resource hungry But how about serving PHP through Apache2 (mod_php, MPM worker, etc)? Does apache will also open new thread like serving static files? (AFAIK, in nginx php-fpm, we can set the max thread, but I dont know how many connection per thread) I'm planning to use Apache2 in serving PHP, and hope it will be same as nginx PHP-FPM or even better in resource usage and performance.

    Read the article

  • What software do you use to detect an internect connection drop?

    - by Darryl Hein
    I'm looking for a piece of software to detect drops in my internet connection and log those drops. OS doesn't really matter since I have pretty much everything running here, although something on OSX would be nice. I also don't really care how it determines that connection has been dropped, but I think that there must be something better than a ping or at least a combination of a ping and something else.

    Read the article

  • VPN connection prevents the computer from sleeping - can I avoid that ?

    - by driis
    Most of the time, I need to have an active VPN connection when working from my home PC. I've discovered, that if the VPN is active, and I leave the computer, the computer does not go to sleep automatically, as it should. If i disconnect VPN, it works. Why is that ? How can I ensure that my PC can go into sleep mode automatically even with the VPN connection on ?

    Read the article

  • How can I make my eth0 connection default on startup?

    - by Alex
    I'm running kubuntu 9.10 and every time I log in auto eth0 is used instead of my custom connection called "batnet". I have batnet set to automatically connect, but despite this it is ignored and the default auto eth0 is used instead. This would be fine IF I could somehow figure out how to define a static ip for auto eth0. I would prefer to just make the 'batnet' connection default. How can I do this?

    Read the article

  • is it possible for a host to maintain a tcp connection with two hosts with the same IP?

    - by wenzi
    I have two hosts A and B and a host(called client here) C C will establish a tcp connection with A, and send http requests to A then A will relay the HTTP requests to B (the relaying may be seconds of delay) and B will spoof its IP address as the IP of A and send http response to C I know there is sequnce number inconsistency problem, but is it possible to trick the TCP protocol to make the connection viable? thanks!

    Read the article

  • How to make a dial up connection disconnect automatically after downloading + uploading 90 MB data in Windows?

    - by Shanky
    I am using a modem (ZTE USB Modem FFF1) to connect to internet and I want it to disconnect automatically after completing 90 MB (Downloaded data + Uploaded Data). Can anyone suggest how can I do this. I am using a desktop computer running on Windows 8 Consumer Preview. There's no router. I am using a dial up connection to connect. I just want to limit the data usage of my internet connection, considering sent data + received data.

    Read the article

  • What all is there to know about ping while troubleshooting an internet connection?

    - by tMJ
    What all is there to know about ping and the IP address to ping while troubleshooting/diagnosing a problem in the internet connection? For example: I run the command ping 192.168.1.1 -t in the command prompt, and if there is no reply I get something is odd, but I don't understand what is and where it is. I am looking for a complete list (okay, as many as you got), of IP address to ping while troubleshooting my network connection, and an insight into what the status message returned by them implies.

    Read the article

  • ODBC in SSIS 2012

    - by jamiet
    In August 2011 the SQL Server client team published a blog post entitled Microsoft is Aligning with ODBC for Native Relational Data Access in which they basically said "OLE DB is the past, ODBC is the future. Deal with it.". From that blog post:We encourage you to adopt ODBC in the development of your new and future versions of your application. You don’t need to change your existing applications using OLE DB, as they will continue to be supported on Denali throughout its lifecycle. While this gives you a large window of opportunity for changing your applications before the deprecation goes into effect, you may want to consider migrating those applications to ODBC as a part of your future roadmap.I recently undertook a project using SSIS2012 and heeded that advice by opting to use ODBC Connection Managers rather than OLE DB Connection Managers. Unfortunately my finding was that the ODBC Connection Manager is not yet ready for primetime use in SSIS 2012. The main issue I found was that you can't populate an Object variable with a recordset when using an Execute SQL Task connecting to an ODBC data source; any attempt to do so will result in an error:"Disconnected recordsets are not available from ODBC connections." I have filed a bug on Connect at ODBC Connection Manager does not have same funcitonality as OLE DB. For this reason I strongly recommend that you don't make the move to ODBC Connection Managers in SSIS just yet - best to wait for the next version of SSIS before doing that.I found another couple of issues with the ODBC Connection Manager that are worth keeping in mind:It doesn't recognise System Data Source Names (DSNs), only User DSNs (bug filed at ODBC System DSNs are not available in the ODBC Connection Manager)  UPDATE: According to a comment on that Connect item this may only be a problem on 64bit.In the OLE DB Connection Manager parameter ordinals are 0-based, in the ODBC Connection Manager they are 1-based (oh I just can't wait for the upgrade mess that ensues from this one!!!)You have been warned!@jamiet

    Read the article

  • Security Pattern to store SSH Keys

    - by Mehdi Sadeghi
    I am writing a simple flask application to submit scientific tasks to remote HPC resources. My application in background talks to remote machines via SSH (because it is widely available on various HPC resources). To be able to maintain this connection in background I need either to use the user's ssh keys on the running machine (when user's have passwordless ssh access to the remote machine) or I have to store user's credentials for the remote machines. I am not sure which path I have to take, should I store remote machine's username/password or should I store user's SSH key pair in database? I want to know what is the correct and safe way to connect to remote servers in background in context of a web application.

    Read the article

  • Postfix Submission port issue

    - by RevSpot
    I have setup postfix+mailman on my debian server and i have an issue with postfix submission port. My ISP blocks SMTP on port 25 to prevent *spams and i must to use submission port (587). I have uncomment the following line from master.cf (/etc/postfix/) but nothing happens. submission inet n - - - - smtpd This is my mail logs file when i try to invite a user to mailman list Nov 6 00:35:34 myhostname postfix/qmgr[1763]: C90BF1060D: from=<[email protected]>, size=1743, nrcpt=1 (queue active) Nov 6 00:35:34 myhostname postfix/qmgr[1763]: DF54B10608: from=<[email protected]>, size=488, nrcpt=1 (queue active) Nov 6 00:35:34 myhostname postfix/qmgr[1763]: 80F0D10609: from=<[email protected]>, size=483, nrcpt=1 (queue active) Nov 6 00:35:55 myhostname postfix/smtp[2269]: connect to gmail-smtp-in.l.google.com[173.194.70.27]:25: Connection timed out Nov 6 00:35:55 myhostname postfix/smtp[2270]: connect to gmail-smtp-in.l.google.com[173.194.70.27]:25: Connection timed out Nov 6 00:35:55 myhostname postfix/smtp[2271]: connect to gmail-smtp-in.l.google.com[173.194.70.27]:25: Connection timed out Nov 6 00:36:16 myhostname postfix/smtp[2269]: connect to alt1.gmail-smtp-in.l.google.com[74.125.143.26]:25: Connection timed out Nov 6 00:36:16 myhostname postfix/smtp[2270]: connect to alt1.gmail-smtp-in.l.google.com[74.125.143.26]:25: Connection timed out Nov 6 00:36:16 myhostname postfix/smtp[2271]: connect to alt1.gmail-smtp-in.l.google.com[74.125.143.26]:25: Connection timed out Nov 6 00:36:37 myhostname postfix/smtp[2269]: connect to alt2.gmail-smtp-in.l.google.com[74.125.141.26]:25: Connection timed out Nov 6 00:36:37 myhostname postfix/smtp[2270]: connect to alt2.gmail-smtp-in.l.google.com[74.125.141.26]:25: Connection timed out Nov 6 00:36:37 myhostname4 postfix/smtp[2271]: connect to alt2.gmail-smtp-in.l.google.com[74.125.141.26]:25: Connection timed out Nov 6 00:36:58 myhostname postfix/smtp[2269]: connect to alt3.gmail-smtp-in.l.google.com[173.194.64.26]:25: Connection timed out Nov 6 00:36:58 myhostname postfix/smtp[2270]: connect to alt3.gmail-smtp-in.l.google.com[173.194.64.26]:25: Connection timed out Nov 6 00:36:58 myhostname postfix/smtp[2271]: connect to alt3.gmail-smtp-in.l.google.com[173.194.64.26]:25: Connection timed out Nov 6 00:37:19 myhostname postfix/smtp[2269]: connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out Nov 6 00:37:19 myhostname postfix/smtp[2270]: connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out Nov 6 00:37:19 myhostname postfix/smtp[2269]: C90BF1060D: to=<[email protected]>, relay=none, delay=23711, delays=23606/0.03/105/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out) Nov 6 00:37:19 myhostname postfix/smtp[2271]: connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out Nov 6 00:37:19 myhostname postfix/smtp[2270]: DF54B10608: to=<[email protected]>, relay=none, delay=23882, delays=23777/0.03/105/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out) Nov 6 00:37:19 myhostname postfix/smtp[2271]: 80F0D10609: to=<[email protected]>, relay=none, delay=23875, delays=23770/0.04/105/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.142.26]:25: Connection timed out) main.cf smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = mail.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mail.mydomain.com, localhost.mydomain.com,localhost relayhost = relay_domains = $mydestination, mail.mydomain.com relay_recipient_maps = hash:/var/lib/mailman/data/virtual-mailman transport_maps = hash:/etc/postfix/transport mailman_destination_recipient_limit = 1 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all local_recipient_maps = master.cf smtp inet n - - - - smtpd submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}

    Read the article

  • JMS Adapter Step 0 : Configuring the WLS-JMS resources

    - by [email protected]
    Before getting started with the JMS Adapter, we must configure the connection factories/JMS queues on the WLS admin console. In particular, we will be required to follow these stepsCreate a connection factory. In our case, we will create a "XA Connection Factory". This step is mandatory if you need your JMS queues to participate in a global transaction. Create the WLS JMS QueuesCreating the connection factory:1) Login to the WLS Admin console. On my setup, the url looks like "http://localhost:7001/console".2) Select Services -> Messaging -> JMS Modules -> SOAJMSModule as shown below. We can also create a new JMS Module, but, I took the easier way out by selecting the SOAJMSModule. 3) Click on "New" as shown in order to create the Connection factory.4) Select "Connection Factory" radio button and click "Next".5) Enter the Connection Factory properties as shown and click on "Finish".6) Target the connection factory to your managed server and click on "Finish". 7) Now, go back and select the Connection Factory that you've just created (see Step 2 above) . Click on "Transactions" and enable XA and click on "Save".

    Read the article

  • How do I make my USB Bluetooth dongle work in Ubuntu 11.04 ? (Can't init device hci0: Connection timed out (110)) [closed]

    - by MaikoID
    I've a USB bluetooth dongle root@maiko-cce-lin:~# lsusb | grep Bluetooth Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) that isn't working properly, hardly-ever it works but stops working in my next reboot. what I've tried it isn't software blocked root@maiko-cce-lin:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no my device is recognized by hciconfig root@maiko-cce-lin:~# hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1F:81:00:01:1C ACL MTU: 1021:4 SCO MTU: 180:1 DOWN RX bytes:330 acl:0 sco:0 events:8 errors:0 TX bytes:24 acl:0 sco:0 commands:30 errors:22 Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT but I can't turn on my hci interface root@maiko-cce-lin:~# hciconfig hci up Can't init device hci0: Connection timed out (110) I don't understand why.. the hcitool command doesn't show any device. root@maiko-cce-lin:~# hcitool dev Devices: I've tried to restart my bluetooth service too with this command and make all these previous commands again but without success. root@maiko-cce-lin:~# service bluetooth restart * Stopping bluetooth [ OK ] * Starting bluetooth [ OK ] root@maiko-cce-lin:~# The dongle works if you disconnect it from usb, wait a few seconds and connect it again. so there must be better solution for it ( a solution not involving physically removing the dongle!)

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >