tips - Page 215 - Developer IT

Recommendations or advice for shared computer control

- by Telemachus

Basic scenario: we are a school (overwhelmingly Mac, some Windows machines via BootCamp), and we are considering using DeepFreeze to guard the state of our shared machines. We have roughly 250 machines that are either shared laptops (which move around quite a bit) or common desktops in public spaces. Obviously, we spend a lot of time maintaining the machines and trying to reverse the inevitable drift as people make changes to the computers. We would like to control the integrity of the build we initially put onto the machines without handcuffing users and especially without using Mac's Parental Control software. (We've had nothing but bad experiences with it.) We've been testing DeepFreeze, and so far it's very impressive. But I'm curious to hear if people who have used DeepFreeze or any similar software have any advice or tips. To get things started, I will post my own pros and cons. Pros: The state of the machine is frozen in our chosen state. All changes made to the machine after that disappear upon restart. (This frozen state really appears to cover everything. I have yet to do something to a test machine that isn't instantly healed.) Tons of trivial but time-consuming maintenance is gone in an instant. Also, lots of not-so-trivial breakage should be avoided. There are good options, however, that allow you to create storage spaces either globally or per user. (Otherwise, stored files disappear upon reboot. For some machines, this is a good option itself. Simply warn people: save externally or else; this machine is a kiosk, not your storage space.) Cons: Anytime we actually need to make a change (upgrade basic software, add a printer or an airport permanently, add new software), the process is a bit more complex. Reboot into a special mode (thaw state), make changes, reboot back into frozen mode. If (when?) we forget this, we will end up making changes that disappear after the next reboot. Users will forget to save files correctly (in the right place or externally), and we will have loud, unpleasant conversations explaining that we can't recover the document they worked on all afternoon yesterday. The machine rebooted. The file is gone. These are my initial thoughts, but I would love to hear from other people who have experience with DeepFreeze or any similar software. What should we be careful about? Do the pros outweigh the cons? What gains or problems am I not seeing? Thanks.

Read the article

Cannot Send Item error in Outlook - permissions to registry?

- by Tim Alexander

The issue I am trying to solve is to do with users getting a Cannot Send Item error in Outlook 2007 connecting to Exchange 2007. Basically if there is an image in the email (either one they have pasted in or one from another email in the chain) they get a "Cannot Send Item" error. Initially thought it was a citrix issue but users get it when they RDP to a server as well. Changing the message to Rich Text works 80% of the time but I do not think this is a solution but more of a temporary workaround. After some troubleshooting we found that the error can be fixed by adding the user as a member of the local power users group. of course this is not really a fix. My thoughts were that the ability of a power user to add/remove software may give them more access to the registry which might allow them to get round a restriction that is in place for a normal user. I have tried going through a procmon but the wealth of information is confusing. It initially looked like it may be an Outlook 2007 email security setting but this does not change between power user and normal user (set to 1 in the registry, "Use the security setting from Outlook Security Settings Public Folders"). I am struggling to fine tune my troubleshooting to work out exactly what is blocking it. Has anyone had an experience with an error similar to this? Or are there any tips for trying to track down issues via procmon as I must admit my approach seems somewhat lacking :) EDIT: So I have trawled through the two logs we have from process monitor (one as a power user and one a normal user). annoyingly I can find no obvious difference where something is denied access. There are more access denied events in the normal user log but these are quickly followed by sucessful entries to the same path fractions of a second later. The only thing that does stand out is an access denied to HKCR.html. This does not even appear in the power user version of the log. From what I understand this helps determine the default browser which ties in nicely with the fact that 9 out of 10 times you can send the message as Rich Text. EDIT: Looks like KB2509470 was causing the issue. Not really sure why but when I can work out what it does and why it causes the problem will post here unless anyone beats me to it!

Read the article

Nginx fastcgi problems with django

- by wizard

I'm deploying my first django app. I'm familiar with nginx and fastcgi from deploying php-fpm. I can't get python to recognize the urls. I'm also at a loss on how to debug this further. I'd welcome solutions to this problem and tips on debugging fastcgi problems. Currently I get a 404 page regardless of the url and for some reason a double slash For http://www.site.com/admin/ Page not found (404) Request Method: GET Request URL: http://www.site.com/admin// My urls.py from the debug output - which work in the dev server. Using the URLconf defined in ahrlty.urls, Django tried these URL patterns, in this order: ^listings/ ^admin/ ^accounts/login/$ ^accounts/logout/$ my nginx config server { listen 80; server_name beta.ahrlty.com; access_log /home/ahrlty/ahrlty/logs/access.log; error_log /home/ahrlty/ahrlty/logs/error.log; location /static/ { alias /home/ahrlty/ahrlty/ahrlty/static/; break; } location /media/ { alias /usr/lib/python2.6/dist-packages/django/contrib/admin/media/; break; } location / { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:8001; break; } } and my fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param PATH_INFO $fastcgi_script_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; And lastly I'm running fastcgi from the commandline with django's manage.py. python manage.py runfcgi method=threaded host=127.0.0.1 port=8080 pidfile=mysite.pid minspare=4 maxspare=30 daemonize=false I'm having a hard time debugging this one. Does anything jump out at anybody?

Read the article

how to use iptables to block the IP of device connected to openwrt router

- by scola

I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

Read the article

Varnish server in front of nginx server with multiple virtualhosts

- by Garreth 00

I have tried to search for a solution for this, but can't find any documentation/tips on my specific setup. My setup: Backendserver: ngnix: 2 different websites (2 top domains) in virtualenv, running gunicorn/python/django Backendserver hardware(VPS) 2gb ram, 8 CPU Databaseserver: postgresql - pg_bouncer Backendserver hardware (VPS) 1gb ram, 8 CPU Varnishserver: only running varnish Varnishserver hardware (VPS) 1gb ram, 8 CPU I'm trying to set up a varnish server to handle rare spike in traffic (20 000 unique req/s) The spike happens when a tv program mention one of the sites. What do I need to do, to make the varnish server cache both sites/domains on my backendserver? My /etc/varnish/default.vcl : backend django_backend { .host = "local.backendserver.com"; .port = "8080"; } My /usr/local/nginx/site-avaible/domain1.com upstream gunicorn_domain1 { server unix:/home/<USER>/.virtualenvs/<DOMAIN1>/<APP1>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain1.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80 default_server; listen 8080; client_max_body_size 4G; server_name www.domain1.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain1; break; } } } My /usr/local/nginx/site-avaible/domain2.com upstream gunicorn_domain2 { server unix:/home/<USER>/.virtualenvs/<DOMAIN2>/<APP2>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain2.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80; listen 8080; client_max_body_size 4G; server_name www.domain2.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain2; break; } } } Right now, If I try the Ip of the varnishserver I only get served domain1.com. Would everything be correct if I change the DNS of the two domain to point to the varnishserver, or is there extra setup before it would work? Question 2: Do I need a dedicated server for varnish, or could I just install varnish on my backendserver, or would the server run out of memory quick?

Read the article

joining text files with 600M+ lines

- by dnkb

I have two files huge.txt and small.txt. Huge has around 600M rows and it's 14Gigs, each line has four space separated words (tokens) and finally another space separated column with a number. Small has 150K rows with a size of ~3M, a space separated word and a number. Both Files are sorted using the sort command, with no extra options. The words in both files may include apostrophes (') and dashes (-). The deisred output would contain all columns from the huge.txt and the second column (the number) from small txt where the first word of huge.txt and the first word of small.txt match. My attemtpts below failed miserably with the following error: cat huge.txt|join -o 1.1 1.2 1.3 1.4 2.2 - small.txt > output.txt join: memory exhausted What I suspect is that the sorting order isn't right somehow even though the files are pre-sorted using: sort -k1 huge.unsorted.txt > huge.txt sort -k1 small.unsorted.txt > small.txt Problems seem to appear around words that have apostrophes (') or dashes (-). I also tried dictinoary sorting using the -d option bumping into the same error at the end. I see two ways out of this but don't know how to implement any of them. 1) Any tips how to sort the files in a way that the join command considers them to be sorted properly? 2) I was thinking of calculating MD5 or some other hashes of the strings to get rid of the apostrophes and dashes, and do the sorting and joining with the hashes instead of the strings themselves an dat the "translate" back the hashes to strings, but leave the numbers intact at the end of the lines. Since there would be only 150K hashes it's not that bad. What would be a good way to calculate individual hashes for each of the strings? Some AWK magic? See file samples at the end. Thank you! sample of huge.txt had stirred me to 46 had stirred my corruption 57 had stirred old emotions 55 had stirred something in 69 had stirred something within 40 sample of small.txt caley 114881 calf 2757974 calfed 137861 calfee 71143 calflora 154624 calfskin 148347 calgary 9416465 calgon's 94846

Read the article

Nginx fastcgi problems with django (double slashes in url?)

- by wizard

I'm deploying my first django app. I'm familiar with nginx and fastcgi from deploying php-fpm. I can't get python to recognize the urls. I'm also at a loss on how to debug this further. I'd welcome solutions to this problem and tips on debugging fastcgi problems. Currently I get a 404 page regardless of the url and for some reason a double slash For http://www.site.com/admin/ Page not found (404) Request Method: GET Request URL: http://www.site.com/admin// My urls.py from the debug output - which work in the dev server. Using the URLconf defined in ahrlty.urls, Django tried these URL patterns, in this order: ^listings/ ^admin/ ^accounts/login/$ ^accounts/logout/$ my nginx config server { listen 80; server_name beta.ahrlty.com; access_log /home/ahrlty/ahrlty/logs/access.log; error_log /home/ahrlty/ahrlty/logs/error.log; location /static/ { alias /home/ahrlty/ahrlty/ahrlty/static/; break; } location /media/ { alias /usr/lib/python2.6/dist-packages/django/contrib/admin/media/; break; } location / { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:8001; break; } } and my fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param PATH_INFO $fastcgi_script_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; And lastly I'm running fastcgi from the commandline with django's manage.py. python manage.py runfcgi method=threaded host=127.0.0.1 port=8080 pidfile=mysite.pid minspare=4 maxspare=30 daemonize=false I'm having a hard time debugging this one. Does anything jump out at anybody? Notes nginx version: nginx/0.7.62 Django svn trunk rev 13013

Read the article

D-Link DIR-300 slows down / loses network

- by basic6

there are 2 buildings (A and B). In bldg A is an open WLAN (which I'm allowed to use btw). In bldg B is a computer that I want to connect to that network. So I flashed an old D-Link DIR-300 AP with DD-WRT, mounted it to the wall (bldg B) near a window, attached a 13 dBi directional antenna (pointing to bldg A) and configured it as AP client in that wireless network. Then there's another AP, connected to the D-Link AP, acting as standard access point, which the computer is connected to. That's basically working so far, but: Every now and then the connection is lost. Not the connection between the computer and the D-Link (I can access the DD-WRT admin page normally) or the connection between the D-Link and the WLAN (in Status - Wireless it says it's still connected to the network), but when I want to access a web page (which only works if I'm connected to the wireless network from bldg A), my Firefox keeps "Looking for" (name resolution) without finding anything. When I reset the D-Link (power off, power on) in this situation, after some moments, everything's working fine again (Internet access). I've no idea why this is happening, but usually it's at most every few weeks (most times when nobody was using the computer, so no traffic). Compared to the connection speed when I connect directly to the WLAN in bldg A (Laptop), the speed in bldg B is rather slow, but I have the impression that this difference is worse in the last few days. A few minutes ago, I got 582 KB/s down and 911 KB/s up in bldg A (directly/laptop) and 84 KB/s down and 9 KB/s up in bldg B. The speed in bldg B used to be way higher (I remember 200 KB/s up) while the actual network speed in bldg A was lower than it is now (close to those 200). I'm aware that the wireless connection between those buildings should slow things down, but I'm wondering why this difference has become that extreme. Thanks for any tips... Update: I currently want to upload a large file (1.5 GB) via FTP (FileZilla). Since that caused the D-Link to disconnect (as described in first post), I took my laptop to bldg A, connected directly to the original WLAN (bypassing my D-Link) and tried the same upload. Guess what - same issue: At some point the connection is dead (at this point I would have reset my D-Link if I was connected to it). Just as the D-Link, my laptop is still connected, but not even name resolution is working ("Looking for..." in Firefox). After reconnecting, it's working again. Maybe my D-Link isn't the problem at all...

Read the article

Need help troubleshooting highly variable ping times

- by Elliot.Bradshaw

I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

Read the article

How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

- by LearnCocos2D

I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

Read the article

Oracle ADF Coverage at OOW

- by Frank Nimphius

Below is the schedule for all ADF related sessions at a glance. Note the Meet and greet session added for Wednesday Octiber 3rd from 4.30 pm to 5:30. Oracle ADF and Fusion Development General Session Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM General Session: The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud Marriott Marquis - Salon 8 12:15 PM - 1:15 PM General Session: Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology Moscone West - 3014 1:45 PM - 2:45 PM General Session: Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies Moscone West - 3002/3004 4:45 PM - 5:45 PM General Session: Building Mobile Applications with Oracle Cloud Moscone West - 2002/2004 Conference Session Mon 1 Oct, 2012 Time Title Location 12:15 PM - 1:15 PM Understanding Oracle ADF and Its Role in Oracle Fusion Moscone South - 306 1:45 PM - 2:45 PM Building Performant Oracle ADF Business Components to Meet Tomorrow’s Needs Marriott Marquis - Golden Gate C3 3:15 PM - 4:15 PM End-to-End Oracle ADF Development in Eclipse Marriott Marquis - Golden Gate C3 4:45 PM - 5:45 PM Classic Mistakes with Oracle Application Development Framework Marriott Marquis - Salon 7 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM One Size Doesn’t Fit All: Oracle ADF Architecture Fundamentals Marriott Marquis - Golden Gate C2 10:15 AM - 11:15 AM Oracle Business Process Management/Oracle ADF Integration Best Practices Marriott Marquis - Golden Gate C3 11:45 AM - 12:45 PM Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF Moscone South - 306 11:45 AM - 12:45 PM Secrets of Successful Projects with Oracle Application Development Framework Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM BPM, SOA, and Oracle ADF Combined: Patterns Learned from Oracle Fusion Applications Moscone West - 3003 1:15 PM - 2:15 PM The Future of Forms Is … Oracle Forms (and Friends) Moscone South - 306 5:00 PM - 6:00 PM Best Practices for Integrating SOAP and REST Service into Oracle ADF Marriott Marquis - Golden Gate C2 Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite Moscone West - 3001 10:15 AM - 11:15 AM Visualize This! Best Practices for Data Visualization in Desktop and Mobile Apps Marriott Marquis - Golden Gate C3 10:15 AM - 11:15 AM Set Up Your Oracle ADF Project and Development Team for Productivity: Seven Essential Tips Marriott Marquis - Golden Gate C2 11:45 AM - 12:45 PM How to Migrate an Oracle Forms Application to Oracle ADF Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Oracle ADF: Lessons Learned in Real-World Implementations Moscone South - 309 3:30 PM - 4:30 PM Oracle ADF Implementations Around the Globe: Best Practices Marriott Marquis - Golden Gate C2 3:30 PM - 4:30 PM Oracle Developer Cloud Services Marriott Marquis - Salon 7 4:30 PM - 5:30 PM Oracle JDeveloper and Oracle ADF: What’s New Hilton San Francisco - Continental Ballroom 5 5:00 PM - 6:00 PM Mobile Solutions for Oracle E-Business Suite Applications: Technical Insight Moscone West - 2020 5:00 PM - 6:00 PM Extending Social into Enterprise Applications and Business Processes Marriott Marquis - Golden Gate C3 5:00 PM - 6:00 PM The Tie That Binds: An Introduction to Oracle ADF Bindings Marriott Marquis - Golden Gate C2 Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Moscone West - 3003 11:15 AM - 12:15 PM Deep Dive into Oracle ADF: Advanced Techniques Marriott Marquis - Golden Gate C2 12:45 PM - 1:45 PM Monitor, Analyze, and Troubleshoot Your Oracle ADF Application Marriott Marquis - Golden Gate C2 2:15 PM - 3:15 PM Oracle WebCenter Portal: Creating and Using Content Presenter Templates Marriott Marquis - Golden Gate C2 HOL (Hands-on Lab) Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:45 PM - 2:45 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 4:45 PM - 5:45 PM Application Lifecycle Management with Oracle JDeveloper: Hands-on Lab Marriott Marquis - Salon 3/4 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 11:45 AM - 12:45 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:15 PM - 2:15 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:30 PM - 4:30 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 11:15 AM - 12:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 12:45 PM - 1:45 PM Oracle ADF for Java EE Developers with Oracle Enterprise Pack for Eclipse Marriott Marquis - Salon 3/4 BOF (Birds-of-a-Feather) Mon 1 Oct, 2012 Time Title Location 6:15 PM - 7:00 PM How to Get Started with Oracle ADF Marriott Marquis - Club Room 7:15 PM - 8:00 PM Building Next-Generation Applications with Oracle ADF and Oracle BPM Marriott Marquis - Golden Gate C3 7:15 PM - 8:00 PM The Future of Oracle Forms: Upgrade, Modernize, or Migrate? Marriott Marquis - Golden Gate C2 7:15 PM - 8:00 PM Oracle ADF Faces: One Site for Many Devices Marriott Marquis - Golden Gate C1 - User Group Forum (Sunday Only) Sun 30 Sept, 2012 Time Title Location 9:00 AM - 10:00 AM Oracle ADF Immersion: How an Oracle Forms Developer Immersed Himself in the Oracle ADF World Moscone South - 305 10:15 AM - 11:15 AM Deploy with Joy: Using Hudson to Build and Deploy Your Oracle ADF Applications Moscone South - 305 11:30 AM - 12:30 PM ADF EMG User Group: A Peek into the Oracle ADF Architecture of Oracle Fusion Applications Moscone South - 305 12:45 PM - 3:45 PM ADF EMG User Group: Oracle Fusion Middleware Live Application Development Demo Moscone South - 305 3:15 PM - 4:15 PM Mobile Development with Oracle JDeveloper and Oracle ADF Moscone West - 2010 Demos Demo Location Developer Moscone North, Upper Lobby - N-002 Oracle ADF Mobile Development Moscone North, Upper Lobby - N-001 Oracle Eclipse Projects Hilton San Francisco, Grand Ballroom - HHJ-008 Oracle Enterprise Pack for Eclipse Moscone South, Right - S-208 Oracle JDeveloper and Oracle ADF Moscone South, Right - S-207 Exhibits 0 Exhibitor Location Accenture Moscone South - 1813 Moscone South - 2221 Infosys Moscone South - 1701 Moscone South - SMR-005 Innowave Technology Moscone South - 2309 ODTUG Moscone West, Level 2 Lobby - Kiosk in the User Groups Pavilion Oracle ADF Developers Meet Up Wednesday, Oct 03 Time Activity Location 4:30 PM - 5:30 PM Stop by the OTN Lounge and meet other Oracle ADF & Fusion developers as well as product managers and engineers who work on Oracle ADF, ADF Mobile and ADF Essentials. Feedback and questions welcome, or simply stop by and say ‘hi!’ and enjoy free beer. OTN Lounge

Read the article

Dec 5th Links: ASP.NET, ASP.NET MVC, jQuery, Silverlight, Visual Studio

- by ScottGu

Here is the latest in my link-listing series. Also check out my VS 2010 and .NET 4 series for another on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET ASP.NET Code Samples Collection: J.D. Meier has a great post that provides a detailed round-up of ASP.NET code samples and tutorials from a wide variety of sources. Lots of useful pointers. Slash your ASP.NET compile/load time without any hard work: Nice article that details a bunch of optimizations you can make to speed up ASP.NET project load and compile times. You might also want to read my previous blog post on this topic here. 10 Essential Tools for Building ASP.NET Websites: Great article by Stephen Walther on 10 great (and free) tools that enable you to more easily build great ASP.NET Websites. Highly recommended reading. Optimize Images using the ASP.NET Sprite and Image Optimization Framework: A nice article by 4GuysFromRolla that discusses how to use the open-source ASP.NET Sprite and Image Optimization Framework (one of the tools recommended by Stephen in the previous article). You can use this to significantly improve the load-time of your pages on the client. Formatting Dates, Times and Numbers in ASP.NET: Scott Mitchell has a great article that discusses formatting dates, times and numbers in ASP.NET. A very useful link to bookmark. Also check out James Michael’s DateTime is Packed with Goodies blog post for other DateTime tips. Examining ASP.NET’s Membership, Roles and Profile APIs (Part 18): Everything you could possibly want to known about ASP.NET’s built-in Membership, Roles and Profile APIs must surely be in this tutorial series. Part 18 covers how to store additional user info with Membership. ASP.NET with jQuery An Introduction to jQuery Templates: Stephen Walther has written an outstanding introduction and tutorial on the new jQuery Template plugin that the ASP.NET team has contributed to the jQuery project. Composition with jQuery Templates and jQuery Templates, Composite Rendering, and Remote Loading: Dave Ward has written two nice posts that talk about composition scenarios with jQuery Templates and some cool scenarios you can enable with them. Using jQuery and ASP.NET to Build a News Ticker: Scott Mitchell has a nice tutorial that demonstrates how to build a dynamically updated “news ticker” style UI with ASP.NET and jQuery. Checking All Checkboxes in a GridView using jQuery: Scott Mitchell has a nice post that covers how to use jQuery to enable a checkbox within a GridView’s header to automatically check/uncheck all checkboxes contained within rows of it. Using jQuery to POST Form Data to an ASP.NET AJAX Web Service: Rick Strahl has a nice post that discusses how to capture form variables and post them to an ASP.NET AJAX Web Service (.asmx). ASP.NET MVC ASP.NET MVC Diagnostics Using NuGet: Phil Haack has a nice post that demonstrates how to easily install a diagnostics page (using NuGet) that can help identify and diagnose common configuration issues within your apps. ASP.NET MVC 3 JsonValueProviderFactory: James Hughes has a nice post that discusses how to take advantage of the new JsonValueProviderFactory support built into ASP.NET MVC 3. This makes it easy to post JSON payloads to MVC action methods. Practical jQuery Mobile with ASP.NET MVC: James Hughes has another nice post that discusses how to use the new jQuery Mobile library with ASP.NET MVC to build great mobile web applications. Credit Card Validator for ASP.NET MVC 3: Benjii Me has a nice post that demonstrates how to build a [CreditCard] validator attribute that can be used to easily validate credit card numbers are in the correct format with ASP.NET MVC. Silverlight Silverlight FireStarter Keynote and Sessions: A great blog post from John Papa that contains pointers and descriptions of all the great Silverlight content we published last week at the Silverlight FireStarter. You can watch all of the talks online. More details on my keynote and Silverlight 5 announcements can be found here. 31 Days of Windows Phone 7: 31 great tutorials on how to build Windows Phone 7 applications (using Silverlight). Silverlight for Windows Phone Toolkit Update: David Anson has a nice post that discusses some of the additional controls provided with the Silverlight for Windows Phone Toolkit. Visual Studio JavaScript Editor Extensions: A nice (and free) Visual Studio plugin built by the web tools team that significantly improves the JavaScript intellisense support within Visual Studio. HTML5 Intellisense for Visual Studio: Gil has a blog post that discusses a new extension my team has posted to the Visual Studio Extension Gallery that adds HTML5 schema support to Visual Studio 2008 and 2010. Team Build + Web Deployment + Web Deploy + VS 2010 = Goodness: Visual blogs about how to enable a continuous deployment system with VS 2010, TFS 2010 and the Microsoft Web Deploy framework. Visual Studio 2010 Emacs Emulation Extension and VIM Emulation Extension: Check out these two extensions if you are fond of Emacs and VIM key bindings and want to enable them within Visual Studio 2010. Hope this helps, Scott

Read the article

XNA Notes 007

- by George Clingerman

Every week I keep wondering if there’s going to be enough activity in the community to keep doing these notes on a weekly basis and every week I’m reminded of just how awesome and active the XNA community is. There’s engines being made, tutorials being created, games being crafted. There’s information being shared, questions being answered and then there’s another whole community around the Xbox LIVE Indie Games themselves. It’s really incredibly to just watch all that’s going on and I’m glad I’m playing a small part in all of this. So here’s what I noticed happening in the XNA community last week. If there’s things I’m missing, always feel free to let me know. I love learning about new corners of the XNA community that I wasn’t aware of or just have been missing! XNA Developers: Uditha Bandara held an XNA Game Development Workshops at Singapore Universities http://uditha.wordpress.com/2011/02/18/xna-game-development-workshops-at-singapore-universities-event-update/ Binary Tweed gives his talks about Indie City and gives his opinion on the false promise of digital distribution http://www.develop-online.net/news/37053/OPINION-The-false-promise-of-digital-distribution Kris Steele posts his Trivia or Die postmortem http://www.krissteele.net/blogdetails.aspx?id=246 @MadNinjaSkills (James Johnston) posts his feelings on testing for XBLIG http://www.ezmuze.co.uk/101 Simon (@DDReaper) posts hints and tips for XNA developers to help get the size of their projects down http://twitter.com/#!/DDReaper/status/38279440924545024 http://xna-uk.net/blogs/darkgenesis/archive/2011/02/17/look-at-the-size-of-that-thing.aspx Michael B. McLaughlin proving why he should be an XNA MVP posts the list of commonly used value types in XNA games http://geekswithblogs.net/mikebmcl/archive/2011/02/17/list-of-commonly-used-value-types-in-xna-games.aspx http://twitter.com/#!/mikebmcl/status/38166541354811392 Paul Powell (@ITSligoPaul) posts about a common sprite batch as a game service http://itspaulsblog.blogspot.com/2011/02/xna-common-sprite-batch-as-game-service.html @SigilXNA (John Defenbaugh) posts his new level editor video for the sequel to Opac’s Journey http://twitter.com/SigilXNA/statuses/36548174373982209 http://twitter.com/#!/SigilXNA/status/36548174373982209 http://youtu.be/QHbmxB_2AW8 @jwatte updates kW Animation for XNA 4.0 http://www.enchantedage.com/xna-animation @DSebJ posts Blender to SunBurn http://twitter.com/#!/DSebJ/status/36564920224976896 http://dsebj.evolvingsoftware.com/?p=187 Ads and WP7 Games - @mechaghost shares his revenue data for his ad based games http://www.occasionalgamer.com/2011/02/09/ads-and-wp7-games/ Xbox LIVE Indie Games (XBLIG): Steven Hurdle posts day 100 of his quest to find a fantastic XBLIG purchase every day http://writingsofmassdeduction.com/2011/02/17/day-100-radiangames-ballistic/ Xbox 360 Indie Game Buying Guide - 12 games for $60 including several Xbox LIVE Indie games! (although if the XNA community was asked we could have recommended 60 games for $60...) http://www.indiegamemag.com/xbox360-indie-games-buying-guide/ The best selling Xbox LIVE Indie games of 2010 http://www.1up.com/news/xbox-live-most-popular-games I’d buy that for a dollar! - the California Literary Review points out a few gems on the XBLIG marketplace (and other places) where you can game on the cheap. http://calitreview.com/14125 Armless Octopus Episode 39 - The Indie Gem Octocast http://www.armlessoctopus.com/2011/02/17/armless-octocast-episode-39-the-indie-gem-octocast/ Ska Studios posts a plethora of updates http://www.ska-studios.com/2011/02/11/good-morning-gato-49/ http://www.ska-studios.com/2011/02/14/vampire-smile-valentines/ http://www.ska-studios.com/2011/02/16/the-dishwasher-vs-finds-a-home/ Kotaku posts about the Xbox LIVE Indie Game that makes you go Pew Pew Pew Pew Pew Pew http://kotaku.com/#!5760632/the-game-that-makes-you-go-pew-pew-pew-pew-pew-pew-pew GameMarx continues to be active and doing a ton for the XBLIG community reviews and Top 5 indie games of the week 2/4-2/10 http://www.gamemarx.com/video/the-show/22/ep-9-february-11-2010.aspx a new podcast Xbox Indie New Releases http://twitter.com/#!/gamemarx/status/36888849107910656 http://www.gamemarx.com/news/2011/02/13/a-new-podcast-xbox-indie-new-releases.aspx @MasterBlud uploads Indocalypse XBLIG Collections #2 http://www.youtube.com/watch?v=uzCZSv075mc&feature=youtu.be&a http://twitter.com/#!/MasterBlud/status/37100029697064960 Just Press Start interviews Michael Hicks from MichaelArts, 18 year old creator of Honor in Vengeance http://justpressstart.net/?p=465 Achievement Locked interviews Kris Steele of FunInfused Games http://xboxindies.wordpress.com/2011/02/11/interview-fun-infused-games/ XNA Game Development: XNA -UK launches their XAP test service to help the XNA community http://xna-uk.net/blogs/news/archive/2011/02/18/xna-uk-xap-test-service-now-live.aspx Transmute shows off a video of the standard character editor http://www.youtube.com/watch?v=qqH6gErG948&feature=youtu.be Microsoft Tech Student introduces their first tech student of the month. Meet Daniel Van Tassel from the University of Utah and learn how he created an Xbox LIVE Indie Game using XNA Studio http://blogs.msdn.com/b/techstudent/archive/2010/12/22/introducing-our-first-tech-student-of-the-month-daniel-van-tassel.aspx XNA for Silverlight Developers Part 3 - Animation (transforms) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-3-Animation-transforms.aspx XNA for Silverlight Developers Part 4 - Animation (frame based) http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-4-Animation-frame-based.aspx @suhinini tweets about an XNA Sprite Font generation tool http://twitter.com/#!/suhinini/status/36841370131890176 http://www.nubik.com/SpriteFont/ XNATouch 1.5 is out and in it’s words is faster, simpler, more reliable and has the XNA 4.0 API http://monogame.codeplex.com/releases/view/60815 IndieCity is hosting marketing workshops for Indie Developers (UK and US) http://forums.create.msdn.com/forums/p/75197/457654.aspx#457654 New York Students - Learn XNA and Silverlight for Xbox 360 and Windows Phone 7 http://forums.create.msdn.com/forums/p/72753/456964.aspx#456964 http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/learn-to-build-your-own-games-for-xbox-360-and-windows-phone-7.aspx http://blogs.msdn.com/b/andrewparsons/archive/2011/01/13/build-a-game-in-48-hours-win-a-kinect-or-windows-phone-7.aspx Extra Credits: Videogame Music http://www.escapistmagazine.com/videos/view/extra-credits/2019-Videogame-Music Steve Pavlina posts an article with useful information for all XNA/XBLIG developers http://www.stevepavlina.com/blog/2011/02/completion-vs-perfection/

Read the article

mysql not starting

- by Eiriks

I have a server running on rackspace.com, it been running for about a year (collecting data for a project) and no problems. Now it seems mysql froze (could not connect either through ssh command line, remote app (sequel pro) or web (pages using the db just froze). I got a bit eager to fix this quick and rebooted the virtual server, running ubuntu 10.10. It is a small virtual LAMP server (10gig storage - I'm only using 1, 256mb ram -has not been a problem). Now after the reboot, I cannot get mysql to start again. service mysql status mysql stop/waiting I believe this just means mysql is not running. How do I get this running again? service mysql start start: Job failed to start No. Just typing 'mysql' gives: mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) There is a .sock file in this folder, 'ls -l' gives: srwxrwxrwx 1 mysql mysql 0 2012-12-01 17:20 mysqld.sock From googleing this for a while now, I see that many talk about the logfile and my.cnf. Logs Not sure witch ones I should look at. This log-file is empty: 'var/log/mysql/error.log', so is the 'var/log/mysql.err' and 'var/log/mysql.log'. my.cnf is located in '/etc/mysql' and looks like this. Can't see anything clearly wrong with it either. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ I need the data in the database (so i'd like to avoid reinstalling), and I need it back up running again. All hint, tips and solutions are welcomed and appreciated.

Read the article

Building a database installer with WiX, datadude and Visual Studio 2010

- by jamiet

Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false) so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet

Read the article

WPF ListView as a DataGrid – Part 3

- by psheriff

I have had a lot of great feedback on the blog post about turning the ListView into a DataGrid by creating GridViewColumn objects on the fly. So, in the last 2 parts, I showed a couple of different methods for accomplishing this. Let’s now look at one more and that is use Reflection to extract the properties from a Product, Customer, or Employee object to create the columns. Yes, Reflection is a slower approach, but you could create the columns one time then cache the View object for re-use. Another potential drawback is you may have columns in your object that you do not wish to display on your ListView. But, just because so many people asked, here is how to accomplish this using Reflection. Figure 1: Use Reflection to create GridViewColumns. Using Reflection to gather property names is actually quite simple. First you need to pass any type (Product, Customer, Employee, etc.) to a method like I did in my last two blog posts on this subject. Below is the method that I created in the WPFListViewCommon class that now uses reflection. C#public static GridView CreateGridViewColumns(Type anyType){ // Create the GridView GridView gv = new GridView(); GridViewColumn gvc; // Get the public properties. PropertyInfo[] propInfo = anyType.GetProperties(BindingFlags.Public | BindingFlags.Instance); foreach (PropertyInfo item in propInfo) { gvc = new GridViewColumn(); gvc.DisplayMemberBinding = new Binding(item.Name); gvc.Header = item.Name; gvc.Width = Double.NaN; gv.Columns.Add(gvc); } return gv;} VB.NETPublic Shared Function CreateGridViewColumns( _ ByVal anyType As Type) As GridView ' Create the GridView Dim gv As New GridView() Dim gvc As GridViewColumn ' Get the public properties. Dim propInfo As PropertyInfo() = _ anyType.GetProperties(BindingFlags.Public Or _ BindingFlags.Instance) For Each item As PropertyInfo In propInfo gvc = New GridViewColumn() gvc.DisplayMemberBinding = New Binding(item.Name) gvc.Header = item.Name gvc.Width = [Double].NaN gv.Columns.Add(gvc) Next Return gvEnd Function The key to using Relection is using the GetProperties method on the type you pass in. When you pass in a Product object as Type, you can now use the GetProperties method and specify, via flags, which properties you wish to return. In the code that I wrote, I am just retrieving the Public properties and only those that are Instance properties. I do not want any static/Shared properties or private properties. GetProperties returns an array of PropertyInfo objects. You can loop through this array and build your GridViewColumn objects by reading the Name property from the PropertyInfo object. Build the Product Screen To populate the ListView shown in Figure 1, you might write code like the following: C#private void CollectionSample(){ Product prod = new Product(); // Setup the GridView Columns lstData.View = WPFListViewCommon.CreateGridViewColumns(typeOf(Product)); lstData.DataContext = prod.GetProducts();} VB.NETPrivate Sub CollectionSample() Dim prod As New Product() ' Setup the GridView Columns lstData.View = WPFListViewCommon.CreateGridViewColumns( _ GetType(Product)) lstData.DataContext = prod.GetProducts()End Sub All you need to do now is to pass in a Type object from your Product class that you can get by using the typeOf() function in C# or the GetType() function in VB. That’s all there is to it! Summary There are so many different ways to approach the same problem in programming. That is what makes programming so much fun! In this blog post I showed you how to create ListView columns on the fly using Reflection. This gives you a lot of flexibility without having to write extra code as was done previously. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid – Part 3" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

Read the article

SQL Developer at Oracle Open World 2012

- by thatjeffsmith

We have a lot going on in San Francisco this fall. One of the most personal exciting bits, for what will be my 4th or 5th Open World, is that this will be my FIRST as a member of Team Oracle. I’ve presented once before, but most years it was just me pressing flesh at the vendor booths. After 3-4 days of standing and talking, you’re ready to just go home and not do anything for a few weeks. This time I’ll have a chance to walk around and talk with our users and get a good idea of what’s working and what’s not. Of course it will be a great opportunity for you to find us and get to know your SQL Developer team! 3.4 miles across and back – thanks Ashley for signing me up for the run! This year is going to be a bit crazy. Work wise I’ll be presenting twice, working a booth, and proctoring several of our Hands-On Labs. The fun parts will be equally crazy though – running across the Bay Bridge (I don’t run), swimming the Bay (I don’t swim), having my wife fly out on Wednesday for the concert, and then our first WhiskyFest on Friday (I do drink whisky though.) But back to work – let’s talk about EVERYTHING you can expect from the SQL Developer team. Booth Hours We’ll have 2 ‘demo pods’ in the Exhibition Hall over at Moscone South. Look for the farm of Oracle booths, we’ll be there under the signs that say ‘SQL Developer.’ There will be several people on hand, mostly developers (yes, they still count as people), who can answer your questions or demo the latest features. Come by and say ‘Hi!’, and let us know what you like and what you think we can do better. Seriously. Monday 10AM – 6PM Tuesday 9:45AM – 6PM Wednesday 9:45AM – 4PM Presentations Stop by for an hour, pull up a chair, sit back and soak in all the SQL Developer goodness. You’ll only have to suffer my bad jokes for two of the presentations, so please at least try to come to the other ones. We’ll be talking about data modeling, migrations, source control, and new features in versions 3.1 and 3.2 of SQL Developer and SQL Developer Data Modeler. Day Time Event Monday 10:454:45 What’s New in SQL Developer Why Move to Oracle Application Express Listener Tueday 10:1511:455:00 Using Subversion in Oracle SQL Developer Data Modeler Oracle SQL Developer Tips & Tricks Database Design with Oracle SQL Developer Data Modeler Wednesday 11:453:30 Migrating Third-Party Databases and Applications to Oracle Exadata 11g Enterprise Options and Management Packs for Developers Hands On Labs (HOLs) The Hands On Labs allow you to come into a classroom environment, sit down at a computer, and run through some exercises. We’ll provide the hardware, software, and training materials. It’s self-paced, but we’ll have several helpers walking around to answer questions and chat up any SQL Developer or database topic that comes to mind. If your employer is sending you to Open World for all that great training, the HOLs are a great opportunity to capitalize on that. They are only 60 minutes each, so you don’t have to worry about burning out. And there’s no homework! Of course, if you do want to take the labs home with you, many are already available via the Developer Day Hands-On Database Applications Developer Lab. You will need your own computer for those, but we’ll take care of the rest. Wednesday PL/SQL Development and Unit Testing with Oracle SQL Developer 10:15 Performance Tuning with Oracle SQL Developer 11:45 Thursday The Soup to Nuts of Data Modeling with Oracle SQL Developer Data Modeler 11:15 Some Parting Advice Always wanted to meet your favorite Oracle authors, speakers, and thought-leaders? Don’t be shy, walk right up to them and introduce yourself. Normal social rules still apply, but at the conference everyone is open and up for meeting and talking with attendees. Just understand if there’s a line that you might only get a minute or two. It’s a LONG conference though, so you’ll have plenty of time to catch up with everyone. If you’re going to be around on Tuesday evening, head on over to the OTN Lounge from 4:30 to 6:30 and hang out for our Tweet Meet. That’s right, all the Oracle nerds on Twitter will be there in one place. Be sure to put your Twitter handle on your name tag so we know who you are!

Read the article

It’s nice to be important, but it’s more important to be nice

- by BuckWoody

I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge. (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot) I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea! No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example. Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement. Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.” Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you. The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.” The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person. Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way. OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

My Interview with Microsoft

- by Victor Hurdugaci

This post is for those who want to apply or have already applied (but not finished the interview) for a Microsoft Job. The recruitment process is quite similar for everyone and consists of a few steps. Application E-Mail Interview Phone Interview On Site Interview I will tell you my story and how I went through the four phases. 1. Application My blog's title (Ex Nihilo Nihil Fit) means "Nothing Comes Out of Nothing". You can't get a job at Microsoft by not doing anything - this is true for anything else. The first step you need to complete is the application process. For this, many options are available. You can... ... apply online on Microsoft's Careers website as I did ... send your CV to different e-mail addresses (there are some dedicated e-mails for different positions) ... apply through some 3rd party organization (job shop, campus recruitment, job agency, etc) On MS Careers you just have to post your CV and choose the job you want. That's all! No recommendation letter, no cover letter, no nothing. Of course, not every CV passes the selection process. Here are some tips for improving your resume (worked for me): Don't write it just before applying! Write a draft version, wait a few days and then review it. This way you will find a lot of mistakes and stupid things you wrote initially. If you review it immediately after writing, your mind will not be criticism oriented and will just ignore mistakes. Repeat the write-wait-review process as many times as necessary, until you find that the review revealed no mistakes. After you did the final review and the CV is bullet-proof, ask others to review it. They will definitely find inconsistencies and mistakes and this will make you feel stupid. This is good because will open your eyes will make you go into an 'I want to improve' mode. You'll try to correct everything. After you come up with a modified version go again through steps 1 and 2. Repeat this as many times as necessary. [Special thanks to Lucian Sasu, Nadia Comanici, Andrei Ciobanu, Monica Balan and Lavinia Tanase for reviewing my CV!] Make it short and give only relevant facts. Initially, I come up with a 5 pages CV because I wrote every single technology with which I worked. There were a lot irrelevant things, I wrote Windows Workflow Foundation just because I played with it for a few days. I added extensive descriptions for every project, made a personal details section (name, birth date, address, etc) of 1/2 page. Others suggested to cut everything that was not necessary. You don't need to give extensive descriptions, just add a few words. For example, I wrote "VS Image Visualizer - Visual Studio 2008 debug visualizer for images" and added a link to the project's page - you submit formatted andcan embed links. Add something that makes it different. I don't know if this makes a difference, but I added some lines to separate items just like in the picture below. Definitely Microsoft gets thousands of CVs per day. You need something special. Don't lie! Tell exactly what you did and what is the proficiency level of your skills. For example, don't write "Advanced" for UML if you don't know the difference between composition and aggregation. Be realistic and don't under/over estimate yourself. Use the spell chick. Make sure everything is written in correct English and there are no grammar/spelling mistakes. Noddy likes a WC with grammar mi takes. You mght fail just because of that. Once you completed your CV, choose the job that suits best your needs, apply and wait... The waiting is a problem because all these big companies like Microsoft, Google, Mozilla, Apple, etc. will contact you only if they find something interesting in your application. If you're not suitable, then no rejection is sent. I applied for an Intern Software Development Engineer position at Microsoft Redmond. I cannot apply for a full time position because I want to finish the master program on time, in the next summer - an internship is just what I need. 2. E-Mail Interview January 20, 2010. Two months since I submitted the CV. I wasn't hoping anymore that MS will contact me, when I got an e-mail titled: "Victor Hurdugaci ES DK" from Holly Peterson saying: Read more >>

Read the article

It’s nice to be important, but it’s more important to be nice

- by BuckWoody

I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge. (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot) I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea! No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example. Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement. Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.” Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you. The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.” The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person. Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way. OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

EBS Techstack Sessions at OAUG/Collaborate 2010

- by Steven Chan

We have a large contingent of E-Business Suite Applications Technology Group staff rolling out to the OAUG/Collaborate 2010 conference in Las Vegas new week. Our Applications Technology Group staff will be appearing as guest speakers or full-speakers at the following E-Business Suite technology stack related sessions:Database Special Interest GroupSunday, April 18, 11:00 AM, Breakers FSIG Leaders: Michael Brown, Colibri; Sandra Vucinic, Vlad GroupGuest Speaker: Steven ChanCovering database upcoming and past desupport dates, and database support policies as they apply to E-Business Suite environments, general Q&A E-Business Suite Technology Stack Special Interest GroupSunday, April 18, 3:00 PM, Breakers FSIG Leaders: Elke Phelps, Paul Jackson, HumanaGuest Speaker: Steven ChanCovering the latest EBS technology stack certifications, roadmap, desupport noticesupgrade options for Discoverer, OID, SSO, Portal, general Q&A E-Business Suite Applications Technology Roadmap & VisionMonday, April 19, 8:00 AM, South Seas GOracle Speaker: Uma PrabhalaLatest developments for SOA, AOL, OAF, Web ADI, SES, AMP, ACMP, security, and other technologies Oracle E-Business Suite Applications Strategy and General Manager UpdateMonday, April 19, 2:30 PM, Mandalay Bay Ballroom DOracle Speaker: Cliff GodwinUpdate on the entire Oracle E-Business Suite product line. The session covers the value delivered by the current release of Oracle E-Business Suite applications, the momentum, and how Oracle E-Business Suite applications integrate into Oracle's overall applications strategy 10 Things You Can Do Today to Prepare for the Next Generation ApplicationsTuesday, April 20, 8:00 AM, South Seas FOracle Speaker: Nadia Bendjedou"Common sense" and "practical" steps that can be taken today to increase the value of your Oracle Applications (E-Business Suite, PeopleSoft, Siebel, and JDE) investments by using the latest Oracle solutions and technologiesReducing TCO using Oracle E-Business Suite Management PacksTuesday, April 20, 10:30 AM, South Seas EOracle Speaker: Angelo RosadoLearn how you can reduce the Total Cost of Ownership by implementing Application Management Pack (AMP) and Application Change Management Pack (ACP) for E-Business Suite 11i, R12, R12.1. AMP is Oracle's next generation system manageability product offering that provides a centralized platform to manage and maintain EBS. ACP is Oracle's offering to monitor and manage E-Business Suite changes in the areas of E-Business Suite Customizations, Patches and Functional Setups. E-Business Suite Upgrade Special Interest GroupTuesday, April 20, 3:15 PM, South Seas ESIG Leaders: John Stouffer; Sandra Vucinic, Vlad GroupGuest Speaker: Steven ChanParticipating in general Q&A E-Business Suite Technology Essentials: Using the Latest Oracle Technologies with E-Business Suite Wednesday, April 21, 8:00 AM, South Seas HOracle Speaker: Lisa ParekhOracle continues to build new functionality into the Oracle Database, Fusion Middleware, and Enterprise Manager. Come see how you can enhance the value of E-Business Suite for your users and lower your costs of ownership by utilizing the latest features of these Oracle technologies with E-Business Suite. Learn about the latest advanced E-Business Suite topologies and features, including new options for security, performance, third-party integration, SOA, virtualization, clouds, systems management, and much more How to Leverage the New E-Business Suite R12.1 Solutions Without Upgrading your 11.5.10 EnvironmentWednesday, April 21, 10:30 AMOracle Speaker: Nadia Bendjedou, South Seas ELearn how you can use the latest E-Business Suite 12.1 standalone solutions without upgrading from your E-Business Suite 11.5.10 environment Web 2.0 User Experience and Oracle Fusion Middleware Integration with Oracle E-Business SuiteWednesday, April 21, 4:00 PM, South Seas FOracle Speaker: Padmaprabodh AmbaleSee the next generation Oracle E-Business Suite OA framework improvements that will provide new rich interactions in components such as LOV, Tables and Attachments. See new components like the Rich Container that allows any Web 2.0 content like Flash or OBIEE to be embedded in OA Framework pages. Advanced Technology Deployment Architectures for E-Business Suite Wednesday, April 21, 2:15 PM, South Seas EOracle Speaker: Steven ChanLearn how to take advantage of the latest version of Oracle Fusion Middleware with Oracle E-Business Suite. Learn how to utilize identity management systems and LDAP directories. In addition, come to this session for answers about advanced network deployments involving reverse proxy servers, load balancers, and DMZ's, and to see how you can take benefit from virtualization and new system management capabilities. Upgrading to Oracle E-Business Suite 12.1 - Best PracticesThursday, April 22, 11:00 AM, South Seas EOracle Speaker: Lester Gutierrez, Udayan ParvateFundamental of upgrading to Release 12.1, which includes the technology stack components and differences, the upgrade path from various releases of Oracle E-Business Suite, upgrade steps, monitoring the upgrade, hints and tips for minimizing downtime and upgrade best practices for making the upgrade to Release 12.1 a success. We look forward to seeing you there!

Read the article

Book Review: Oracle ADF Real World Developer’s Guide

- by Frank Nimphius

Recently PACKT Publishing published "Oracle ADF Real World Developer’s Guide" by Jobinesh Purushothaman, a product manager in our team. Though already the sixth book dedicated to Oracle ADF, it has a lot of great information in it that none of the previous books covered, making it a safe buy even for those who own the other books published by Oracle Press (McGrwHill) and PACKT Publishing. More than the half of the "Oracle ADF Real World Developer’s Guide" book is dedicated to Oracle ADF Business Components in a depth and clarity that allows you to feel the expertise that Jobinesh gained in this area. If you enjoy Jobinesh blog (http://jobinesh.blogspot.co.uk/) about Oracle ADF, then, no matter what expert you are in Oracle ADF, this book makes you happy as it provides you with detail information you always wished to have. If you are new to Oracle ADF, then this book alone doesn't get you flying, but, if you have some Java background, accelerates your learning big, big, big times. Chapter 1 is an introduction to Oracle ADF and not only explains the layers but also how it compares to plain Java EE solutions (page 13). If you are new to Oracle JDeveloper and ADF, then at the end of this chapter you know how to start JDeveloper and begin your ADF development Chapter 2 starts with what Jobinesh really is good at: ADF Business Components. In this chapter you learn about the architecture ingredients of ADF Business Components: View Objects, View Links, Associations, Entities, Row Sets, Query Collections and Application Modules. This chapter also provides a introduction to ADFBC SDO services, as well as sequence diagrams for what happens when you execute queries or commit updates. Chapter 3 is dedicated to entity objects and is one of many chapters in this book you will enjoy and never want to miss. Jobinesh explains the artifacts that make up an entity object, how to work with entities and resource bundles, and many advanced topics, including inheritance, change history tracking, custom properties, validation and cursor handling. Chapter 4 - you guessed it - is all about View objects. Comparable to entities, you learn about the XM files and classes that make a view object, as well as how to define and work with queries. List-of-values, inheritance, polymorphism, bind variables and data filtering are interesting - and important topics that follow. Again the chapter provides helpful sequence diagrams for you to understand what happens internally within a view object. Chapter 5 focuses on advanced view object and entity object topics, like lifecycle callback methods and when you want to override them. This chapter is a good digest of Jobinesh's blog entries (which most ADF developers have in their bookmark list). Really worth reading ! Chapter 6 then is bout Application Modules. Beside of what application modules are, this chapter covers important topics like properties, passivation, activation, application module pooling, how and where to write custom logic. In addition you learn about the AM lifecycle and request sequence. Chapter 7 is about the ADF binding layer. If you are new to Oracle ADF and got lost in the more advanced ADF Business Components chapters, then this chapter is where you get back into the game. In very easy terms, Jobinesh explains what the ADF binding is, how it fits into the JSF request lifecycle and what are the metadata file involved. Chapter 8 then goes into building data bound web user interfaces. In this chapter you get the basics of JavaServer Faces (e.g. managed beans) and learn about the interaction between the JSF UI and the ADF binding layer. Later this chapter provides advanced solutions for working with tree components and list of values. Chapter 9 introduces bounded task flows and ADF controller. This is a chapter you want to read if you are new to ADF of have started. Experts don't find anything new here, which doesn't mean that it is not worth reading it (I for example, enjoyed the controller talk very much) Chapter 10 is an advanced coverage of bounded task flow and talks about contextual events Chapter 11 is another highlight and explains error handling, trains, transactions and more. I can only recommend you read this chapter. I am aware of many documents that cover exception handling in Oracle ADF (and my Oracle Magazine article for January/February 2013 does the same), but none that covers it in such a great depth. Chapter 12 covers ADF best practices, which is a great round-up of all the tips provided in this book (without Jobinesh to repeat himself). Its all cool stuff that helps you with your ADF projects. In summary, "Oracle ADF Real World Developer’s Guide" by Jobinesh Purushothaman is a great book and addition for all Oracle ADF developers and those who want to become one. Frank

Read the article

XNA Notes 004

- by George Clingerman

The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

Read the article

Agile Testing Days 2012 – Day 1 – The birth of the #unicorn…

- by Chris George

Still riding the high from the tutorial day, I arrived at the conference venue eager to get cracking with the days talks. The opening Keynote was “Disciplined Agile Delivery: The Foundation for Scaling Agile” presented by Scott Ambler. The general ideas behind the methodology such as not re-inventing the wheel, and being goal driven, not prescriptive in how you work certainly struck chords with how we are trying to work in my team. Scott made some interesting observations about how scrum is quite prescriptive and is this really agile? I agreed with quite a few of his points on how what works for one team may not work for another. How a team works should be driven by context and reflection, not process and prescription. However was somewhat dubious about some of the statistics he rolled out towards the end. However, out of this keynote was born something that was to transcend this one presentation. During the talk, Scott mentioned on more than one occasion “In the real world”, and at one point made reference to people living in the land of unicorns and rainbows. The challenge was then laid down on twitter for all speakers to include a unicorn in their presentations… and for the most part this happened! It became an identity for this years conference, and I’m sure something that any attendee will always associate with Agile Testing Days 2012! Following this keynote, I attended “Going agile with Automated GUI Testing – Some personal insights” by Jan Zdunek from codecentric on the vendor track. My speciality is test automation, and in particular GUI testing, so this drew me to this talk more than the others. Thankfully, it was made clear from the very start that this was not peddling any particular product (even though it was on the vendor track), and Jan faithfully stuck to that. Most of the content was not new to me, but it was really comforting to hear someone else with very similar experiences to my own. In particular, things like how GUI testing is hard and is not a silver bullet; how record & replay is NOT a good thing to do (which drew a somewhat inflammatory tweet from an automation company when I tweeted that!). Something that I have started hearing around the place, and has certainly been murmuring at work is to push more of the automation coding onto the developers. After all they are the coding experts. I agree with this to a degree, but I personally enjoy coding and find it very rewarding doing so, therefore I’d be reluctant to give it up. I think there are some better alternatives such as pairing with a developer. Lastly, Jan mentioned, almost in passing, that we should consider virtualisation for gui testing for covering configuration combinations. On my project we’ve been running our win32/.NET GUI tests in cloud virtualisation for a couple of years now… I really should write about that! After lunch the second keynote of the day was by Lisa Crispin and Janet Gregory,”Myths about Agile Testing, De-Bunked”. It started off well… with the two ladies donning Medusa style head bands whilst they disbanding several myths about agile testing! I got the impression that it was perhaps not as slick as they would have liked, but then Janet was suffering with a very sore throat so kept losing her voice. Nevertheless, the presentation was captivating, and they debunked several myths such as : “Testing is dead”, “Testers must write code”, “Agile teams always deliver faster”. I didn’t take many notes for this because it was being recorded, but unfortunately the recordings have not been posted yet so I’ll write more about this when they are. The TestLab was held during a somewhat free for all time during most of the afternoon. It looked intriguing and proved to be one of the surprising experiences of the conference for me. Run by James Lyndsay and Bart Knaack, it consisted of a number of ‘stations’ that offered different testing problems. I opted for testing a mathematical drawing app call Geogebra, the task being to pair up and exploratory test it. After an allotted time, we discussed issues we’d found and decided if we wanted to continue ‘playing’ to which we all agreed! It was fun! The last track talk of the day was “Developers Exploratory Testing – Raising the bar” by Sigge Birgisson. One of the teams at Red Gate have tried Dev or Team exploratory testing a couple of times, and I was really interested to go to the presentation that prompted that. I was not disappointed! Sigge gave a first class presentation, and not only explained what DET was all about, but also how to go about implementing it. Little tips like calling it a ‘workshop’ rather than ‘testing’ I can really see working! Monday evening saw the presentation of the award for the Most Influential Agile Testing Professional Person go to a much deserved Lisa Crispin. The evening was great, with acrobatics, magic and music. My Takeaway Triple from Day 1: Some of the cool stuff that was suggested in the GUI Testing talk, we are already doing. I should write about that! Testing is not dead! Perhaps testing will become more of a skill than a specific role, but it is certainly not dead. Team/Developer exploratory testing… seems like a no-brainer assuming you have a team who is willing. Day 2 – Coming soon…

Read the article

Social Business Forum Milano: Day 2

- by me

@YourService. The business world has flipped and small business can capitalize by Frank Eliason (twitter: @FrankEliason ) Technology and social media tools have made it easier than ever for companies to communicate with consumers. They can listen and join in on conversations, solve problems, get instant feedback about their products and services, and more. So why, then, are most companies not doing this? Instead, it seems as if customer service is at an all time low, and that the few companies who are choosing to focus on their customers are experiencing a great competitive advantage. At Your Service explains the importance of refocusing your business on your customers and your employees, and just how to do it. Explains how to create a culture of empowered employees who understand the value of a great customer experience Advises on the need to communicate that experience to their customers and potential customers Frank Eliason, recognized by BusinessWeek as the 'most famous customer service manager in the US, possibly in the world,' has built a reputation for helping large businesses improve the way they connect with customers and enhance their relationships Quotes from the Audience: Bertrand Duperrin ?@bduperrin social service is not about shutting up the loudest cutsomers ! #sbf12 @frankeliason Paolo Pelloni ?@paolopelloniGautam Ghosh ?@GautamGhosh RT @cecildijoux: #sbf12 @frankeliason you need to change things and fix the approach it's not about social media it's about driving change Peter H. Reiser ?@peterreiser #sbf12 Company Experience = Product Experience + Customer Interactions + Employee Experience @yourservice Engage or lose! Socialize, mobilize, conversify: engage your employees to improve business performance Christian Finn (twitter: @cfinn) First Christian was presenting the flying monkey Then he outlined the four principals to fix the Intranet: 1. Socalize the Intranet 2. Get Thee to a Single Repository 3. Mobilize the Intranet 4. Conversationalize Your Processes Quotes from the Audience: Oscar Berg ?@oscarberg Engaged employees think their work bring out the best of their ideas @cfinn #sbf12 http://pic.twitter.com/68eddp48 John Stepper ?@johnstepper I like @cfinn's "conversify your processes" A nice related concept to "narrating your work", part of working out loud. http://johnstepper.com/2012/05/26/working-out-loud-your-personal-content-strategy/ Oscar Berg ?@oscarberg Organizations are talent markets - socializing your intranet makes this market function better @cfinn #sbf12 For profit, productivity, and personal benefit: creating a collaborative culture at Deutsche Bank John Stepper (twitter:@johnstepper) Driving adoption of collaboration + social media platforms at Deutsche Bank. John shared some great best practices on how to deploy an enterprise wide community model in a large company. He started with the most important question What is the commercial value of adding social ? Then he talked about the success of Community of Practices deployment and outlined some key use cases including the relevant measures to proof the ROI of the investment. Examples: Community of practice -> measure: systematic collection of value stories Self-service website -> measure: based on representative models Optimizing asset inventory - > measure: Actual counts This use case was particular interesting. It is a crowd sourced spending/saving of infrastructure model. User can cancel IT services they don't need (as example Software xx). 5% of the saving goes to social responsibility projects. The John outlined some best practices on how to address the WIIFM (What's In It For Me) question of the individual users: - change from hierarchy to graph - working out loud = observable work + narrating your work - add social skills to career objectives - example: building a purposeful social network course/training as part of the job development curriculum And last but not least John gave some important tips on how to get senior management buy-in by establishing management sponsored division level collaboration boards which defines clear uses cases and measures. This divisional use cases are then implemented using a common social platform. Thanks John - I learned a lot from your presentation! Quotes from the Audience: Ana Silva ?@AnaDataGirl #sbf12 what's in it for individuals at Deutsche Bank? Shapping their reputations in a big org says @johnstepper #e20Ana Silva ?@AnaDataGirl Any reason why not? MT @magatorlibero #sbf12 is Deutsche B. experience on applying social inside company applicable to Italian people? Oscar Berg ?@oscarberg Your career is not a ladder, it is a network that opens up opportunities - @johnstepper #sbf12 Oscar Berg ?@oscarberg @johnstepper: Institutionalizing collaboration is next - collaboration woven into the fabric of daily work #sbf12 Ana Silva ?@AnaDataGirl #sbf12 @johnstepper talking about how Deutsche Bank is using #socbiz to build purposeful CoP & save money

Search Results

Search found 5655 results on 227 pages for 'tips'.

Page 215/227 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222 | Next Page >

- by Telemachus

- by Tim Alexander

- by wizard

- by scola

- by Garreth 00

- by dnkb

- by wizard

- by basic6

- by Elliot.Bradshaw

- by LearnCocos2D

- by Frank Nimphius

- by ScottGu

- by George Clingerman

- by Eiriks

- by jamiet

- by psheriff

- by thatjeffsmith

- by BuckWoody

- by Victor Hurdugaci

- by BuckWoody

- by Steven Chan

- by Frank Nimphius

- by George Clingerman

- by Chris George

- by me

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222 | Next Page >