Search Results

Search found 59569 results on 2383 pages for 'data theory'.

Page 216/2383 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Restart mysql keeping the data

  - by sitonico

  I'm quite new using mysql, so let me know if I'm missing something. I took some holidays, and when I got back to work and I tried to log in phpmyadmin I got a ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I never had this problem, so I was browsing to look for a solution. I tried some things, and I'm afraid I touched too much. I couldn't solve the problem, and the I realized that I had some actualizations to be done, and I thought that they may be helpful for mysql. Then I also realized that when I was doing this actualizations first day, they stopped because I had a lack of space, so I restarted then. Then,when the system was configuring mysql, it didn't advance. I waited for a long time and then I just stopped it and restarted the computer. After it, I just tried to uninstall mysql with sudo apt-get remove mysql-server-5.1, and install it again, but it didn't work. Now I have 2 questions: What do you think it is happening? Should I remove mysql completely? What should I do? I'm afraid of losing my databases, is there anyway to recover the data? Thank you very much in advance. -----------EDIT------- These are the messages: alfonso@alfonso-laptop:/$ tail -F /var/log/syslog | grep Feb 15 15:08:01 alfonso-laptop init: mysql post-start process (15192) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process (15263) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process ended, Feb 15 15:08:31 alfonso-laptop init: mysql post-start process (15264) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process (15358) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process ended, Feb 15 15:09:01 alfonso-laptop init: mysql post-start process (15359) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process (15447) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process ended, Feb 15 15:09:32 alfonso-laptop init: mysql post-start process (15448) terminated with status 1 This is the content of error.log-old 110128 13:17:20 [Note] /usr/sbin/mysqld: Normal shutdown 110128 13:17:20 [Note] Event Scheduler: Purging the queue. 0 events 110128 13:17:20 InnoDB: Starting shutdown... 110128 13:17:22 InnoDB: Shutdown completed; log sequence number 0 590872 110128 13:17:22 [Note] /usr/sbin/mysqld: Shutdown complete 110214 2:08:18 [Note] Plugin 'FEDERATED' is disabled. 110214 2:08:19 InnoDB: Started; log sequence number 0 590872 110214 2:08:19 [Note] Event Scheduler: Loaded 0 events 110214 2:08:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.41-3ubuntu12.8' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) -- Some links of similar problems https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/573318 http://www.linuxquestions.org/questions/linux-newbie-8/lamp-install-on-lucid-mysqld-sock-missing-mysql-terminating-status%3D1-853152/ It seems it's a permissions problem... But I don't know which permissions I should change... SOLVED -- mysql error 2002 "cannot connect to socket"

  Read the article

• l2tp server always 'sent [CCP ResetReq id=0x3]' when got compressed data request

  - by wilbur

  I have built a xl2tpd/ipsec server on my ubuntu 12.04.3, and I managed to make a l2tp vpn connection to the xl2tpd server from my android phone. The xl2tpd log said xl2tpd[10828]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[10828]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[10828]: setsockopt recvref[22]: Protocol not available xl2tpd[10828]: This binary does not support kernel L2TP. xl2tpd[10828]: xl2tpd version xl2tpd-1.2.8 started on atime.me PID:10828 xl2tpd[10828]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[10828]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[10828]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[10828]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[10828]: Listening on IP address 0.0.0.0, port 1701 xl2tpd[10828]: control_finish: Peer requested tunnel 39154 twice, ignoring second one. xl2tpd[10828]: Connection established to 117.136.8.59, 43149. Local: 25339, Remote: 39154 (ref=0/0). LNS session is 'default' However I cannot access the web in my browser. The pppd log said rcvd [Compressed data] 00 1d 82 c4 7c 04 d8 09 ... sent [CCP ResetReq id=0x7] I have googled a lot and found that this was mostly caused by a mppe decompression error. I have disabled BSD-Compress compression with nobsdcomp in /etc/ppp/xl2tpd-options but it did not work. I used openswan-2.6.33 and xl2tpd-1.2.8 which were built from source. And my configurations: /etc/ipsec.conf version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=106.186.121.214 leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = yes [lns default] local ip = 10.10.11.1 ip range = 10.10.11.2-10.10.11.245 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/xl2tpd-options length bit = yes /etc/ppp/xl2tpd-options require-mschap-v2 ms-dns 8.8.8.8 ms-dns 8.8.4.4 asyncmap 0 auth crtscts lock hide-password modem name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4 debug nobsdcomp Any suggestions? Thanks in advance.

  Read the article

• MySQL for Excel 1.1.3 has been released

  - by Javier Treviño

  The MySQL Windows Experience Team is proud to announce the release of MySQL for Excel version 1.1.3, the  latest addition to the MySQL Installer for Windows. MySQL for Excel is an application plug-in enabling data analysts to very easily access and manipulate MySQL data within Microsoft Excel. It enables you to directly work with a MySQL database from within Microsoft Excel so you can easily do tasks such as: Importing MySQL Data into Excel Exporting Excel data directly into MySQL to a new or existing table Editing MySQL data directly within Excel MySQL for Excel is installed using the MySQL Installer for Windows. The MySQL installer comes in 2 versions   Full (150 MB) which includes a complete set of MySQL products with their binaries included in the download Web (1.5 MB - a network install) which will just pull MySQL for Excel over the web and install it when run.   You can download MySQL Installer from our official Downloads page at http://dev.mysql.com/downloads/installer/. MySQL for Excel 1.1.3 introduces the following features:   Upon saving a Workbook containing Worksheets in Edit Mode, the user is asked if he wants to exit the Edit Mode on all Worksheets before their parent Workbook is saved so the Worksheets are saved unprotected, otherwise the Worksheets will remain protected and the users will be able to unprotect them later retrieving the passkeys from the application log after closing MySQL for Excel. Added background coloring to the column names header row of an Import Data operation to have the same look as the one in an Edit Data operation (i.e. gray-ish background). Connection passwords can be stored securely just like MySQL Workbench does and these secured passwords are shared with Workbench in the same way connections are. Changed the way the MySQL for Excel ribbon toggle button works, instead of just showing or hiding the add-in it actually opens and closes it. Added a connection test before any operation against the database (schema creation, data import, append, export or edition) so the operation dialog is not shown and a friendlier error message is shown.   Also this release contains the following bug fixes:   Added a check on every connection test for an expired password, if the password has been expired a dialog is now shown to the user to reset the password. Bug #17354118 - DON'T HANDLE EXPIRED PASSWORDS Added code to escape text values to be imported to an Excel worksheet that start with an equals sign so Excel does not treat those values as formulas that will fail evaluation. This is an option turned on by default that can be turned off by users if they wish to import values to be treated as Excel formulas. Bug #17354102 - ERROR IMPORTING TEXT VALUES TO EXCEL STARTING WITH AN EQUALS SIGN Added code to properly check the reason for a failing connection, if it's a failing password the user gets a dialog to retry the connection with a different password until the connection succeeds, a connection error not related to the password is thrown or the user cancels. If the failing connection is not related to a bad password an error message is shown to the users indicating the reason of the failure. Bug #16239007 - CONNECTIONS TO MYSQL SERVICES NOT RUNNING DISPLAY A WRONG PASSWORD ERROR MESSAGE Added global options dialog that can be accessed from the Schema Selection and DB Object Selection panels where the timeouts for the connection to the DB Server and for the query commands can be changed from their default values (15 seconds for the connection timeout and 30 seconds for the query timeout). MySQL Bug #68732, Bug #17191646 - QUERY TIMEOUT CANNOT BE ADJUSTED IN MYSQL FOR EXCEL Changed the Varchar(65,535) data type shown in the Export Data data type combo box to Text since the maximum row size is 65,535 bytes and any autodetected column data type with a length greater than 4,000 should be set to Text actually for the table to be created successfully. MySQL Bug #69779, Bug #17191633 - EXPORT FAILS FOR EXCEL FILES CONTAINING > 4000 CHARACTERS OF TEXT PER CELL Removed code that was replacing all spaces typed by the user in an overriden data type for a new column in an Export Data operation, also improved the data type detection code to flag as invalid data types with parenthesis but without any text inside or where the contents inside the parenthesis are not valid for the specific data type. Bug #17260260 - EXPORT DATA SET TYPE NOT WORKING WITH MEMBER VALUES CONTAINING SPACES Added support for the year data type with a length of 2 or 4 and a validation that valid values are integers between 1901-2155 (for 4-digit years) or between 0-99 (for 2-digit years). Bug #17259915 - EXPORT DATA YEAR DATA TYPE NOT RECOGNIZED IF DECLARED WITH A DISPLAY WIDTH) Fixed code for Export Data operations where users overrode the data type for columns typing Text in the data type combobox, which is a valid data type but was not recognized as such. Bug #17259490 - EXPORT DATA TEXT DATA TYPE NOT RECOGNIZED AS A VALID DATA TYPE Changed the location of the registry where the MySQL for Excel add-in is installed to HKEY_LOCAL_MACHINE instead of HKEY_CURRENT_USER so the add-in is accessible by all users and not only to the user that installed it. For this to work with Excel 2007 a hotfix may be required (see http://support.microsoft.com/kb/976477). MySQL Bug #68746, Bug #16675992 - EXCEL-ADD-IN IS ONLY INSTALLED FOR USER ACCOUNT THAT THE INSTALLATION RUNS UNDER Added support for Excel 2013 Single Document Interface, now that Excel 2013 creates 1 window per workbook also the Excel Add-In maintains an independent custom task pane in each window. MySQL Bug #68792, Bug #17272087 - MYSQL FOR EXCEL SIDEBAR DOES NOT APPEAR IN EXCEL 2013 (WITH WORKAROUND) Included the latest MySQL Utility with a code fix for the COM exception thrown when attempting to open Workbench in the Manage Connections window. Bug #17258966 - MYSQL WORKBENCH NOT OPENED BY CLICKING MANAGE CONNECTIONS HOTLABEL Fixed code for Append Data operations that was not applying a calculated automatic mapping correctly when the source and target tables had different number of columns, some columns with the same name but some of those lying on column indexes beyond the limit of the other source/target table. MySQL Bug #69220, Bug #17278349 - APPEND DOESN'T AUTOMATICALLY DETECT EXCEL COL HEADER WITH SAME NAME AS SQL FIELD Fixed some code for Edit Data operations that was escaping special characters twice (during edition in Excel and then upon sending the query to the MySQL server). MySQL Bug #68669, Bug #17271693 - A BACKSLASH IS INSERTED BEFORE AN APOSTROPHE EDITING TABLE WITH MYSQL FOR EXCEL Upgraded MySQL Utility with latest version that encapsulates dialog base classes and introduces more classes to handle Workbench connections, and removed these from the Excel project. Bug #16500331 - CAN'T DELETE CONNECTIONS CREATED WITHIN ADDIN You can access the MySQL for Excel documentation at http://dev.mysql.com/doc/refman/5.6/en/mysql-for-excel.html You can find our team’s blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our MySQL for Excel forum found at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Restart mysql keeping the data

  - by sitonico

  Hi all, I'm quite new using mysql, so let me know if I'm missing something. I took some holidays, and when I got back to work and I tried to log in phpmyadmin I got a ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I never had this problem, so I was browsing to look for a solution. I tried some things, and I'm afraid I touched too much. I couldn't solve the problem, and the I realized that I had some actualizations to be done, and I thought that they may be helpful for mysql. Then I also realized that when I was doing this actualizations first day, they stopped because I had a lack of space, so I restarted then. Then,when the system was configuring mysql, it didn't advance. I waited for a long time and then I just stopped it and restarted the computer. After it, I just tried to uninstall mysql with sudo apt-get remove mysql-server-5.1, and install it again, but it didn't work. Now I have 2 questions: What do you think it is happening? Should I remove mysql completely? What should I do? I'm afraid of losing my databases, is there anyway to recover the data? Thank you very much in advance. -----------EDIT------- These are the messages: alfonso@alfonso-laptop:/$ tail -F /var/log/syslog | grep Feb 15 15:08:01 alfonso-laptop init: mysql post-start process (15192) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process (15263) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process ended, Feb 15 15:08:31 alfonso-laptop init: mysql post-start process (15264) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process (15358) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process ended, Feb 15 15:09:01 alfonso-laptop init: mysql post-start process (15359) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process (15447) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process ended, Feb 15 15:09:32 alfonso-laptop init: mysql post-start process (15448) terminated with status 1 This is the content of error.log-old 110128 13:17:20 [Note] /usr/sbin/mysqld: Normal shutdown 110128 13:17:20 [Note] Event Scheduler: Purging the queue. 0 events 110128 13:17:20 InnoDB: Starting shutdown... 110128 13:17:22 InnoDB: Shutdown completed; log sequence number 0 590872 110128 13:17:22 [Note] /usr/sbin/mysqld: Shutdown complete 110214 2:08:18 [Note] Plugin 'FEDERATED' is disabled. 110214 2:08:19 InnoDB: Started; log sequence number 0 590872 110214 2:08:19 [Note] Event Scheduler: Loaded 0 events 110214 2:08:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.41-3ubuntu12.8' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)

  Read the article

• What is the best way to store anciliary data with a 2D timeseries object in R?

  - by Mike52

  I currently try to move from matlab to R. I have 2D measurements, consisting of irradiance in time and wavelength together with quality flags and uncertainty and error estimates. In Matlab I extended the timeseries object to store both the wavelength array and the auxiliary data. What is the best way in R to store this data? Ideally I would like this data to be stored together such that e.g. window(...) keeps all data synchronized.

  Read the article

• What is the diffference between "data hiding" and "encapsulation"?

  - by john smith optional

  I'm reading "Java concurrency in practice" and there is said: "Fortunately, the same object-oriented techniques that help you write well-organized, maintainable classes - such as encapsulation and data hiding -can also help you crate thread-safe classes." The problem #1 - I never heard about data hiding and don't know what it is. The problem #2 - I always thought that encapsulation is using private vs public, and is actually the data hiding. Can you please explain what data hiding is and how it differs from encapsulation?

  Read the article

• After compiling PHP, I get mod_fcgid: error reading data from FastCGI server

  - by user34295

  I'm trying to add multiple PHP version in Plesk 12. Switching my domain to the new version PHP 5.4.29 result in this error: (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server Here is phpinfo() of the complied PHP version, obtained running php54-cgi index.php from the terminal. The same script placed under document root doesn't work in FastCGI. How can I debug/try to figure out what's the error? Currently running CentOS 6.5 x64, Plesk v12.0.18_build1200140529.2, PHP 5.5.13. I've downloaded PHP 5.4.29: cd /usr/local/src curl -O http://it1.php.net/distributions/php-5.4.29.tar.gz cd php-5.4.29 And configured with: ./configure \ --prefix=/usr/local/php54 \ --with-bz2 \ --with-config-file-path=/usr/local/php54/etc \ --with-config-file-scan-dir=/usr/local/php54/etc/php.d \ --with-curl \ --with-gd \ --with-gettext \ --with-iconv \ --with-layout=PHP \ --with-libxml-dir=/usr/local/php54 \ --with-mhash \ --with-mysql=mysqlnd \ --with-mysqli=mysqlnd \ --with-openssl \ --with-pdo-mysql=mysqlnd \ --with-readline \ --with-xsl \ --with-zlib \ --enable-calendar \ --enable-cgi \ --enable-exif \ --enable-ftp \ --enable-intl \ --enable-mbstring \ --enable-pcntl \ --enable-shmop \ --enable-sockets \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --enable-wddx \ --enable-zip Then: make && make install Installing PHP CLI binary: /usr/local/php54/bin/ Installing PHP CLI man page: /usr/local/php54/php/man/man1/ Installing PHP CGI binary: /usr/local/php54/bin/ Installing PHP CGI man page: /usr/local/php54/php/man/man1/ Installing build environment: /usr/local/php54/lib/php/build/ Installing header files: /usr/local/php54/include/php/ Installing helper programs: /usr/local/php54/bin/ program: phpize program: php-config Installing man pages: /usr/local/php54/php/man/man1/ page: phpize.1 page: php-config.1 Installing PEAR environment: /usr/local/php54/lib/php/ [PEAR] Archive_Tar - installed: 1.3.11 [PEAR] Console_Getopt - installed: 1.3.1 warning: pear/PEAR requires package "pear/Structures_Graph" (recommended version 1.0.4) warning: pear/PEAR requires package "pear/XML_Util" (recommended version 1.2.1) [PEAR] PEAR - installed: 1.9.4 Wrote PEAR system config file at: /usr/local/php54/etc/pear.conf You may want to add: /usr/local/php54/lib/php to your php.ini include_path [PEAR] Structures_Graph- installed: 1.0.4 [PEAR] XML_Util - installed: 1.2.1 /usr/local/src/php-5.4.29/build/shtool install -c ext/phar/phar.phar /usr/local/php54/bin ln -s -f /usr/local/php54/bin/phar.phar /usr/local/php54/bin/phar Installing PDO headers: /usr/local/php54/include/php/ext/pdo/ Copied php.ini-production to /usr/local/php54/etc/php.ini and added a new handler in Plesk: /usr/local/psa/bin/php_handler --add -displayname 5.4.29 -path /usr/local/php54/bin/php-cgi -phpini /usr/local/php54/etc/php.ini -type fastcgi -id php54 Symbolic linking: ln -s /usr/local/php54/bin/php /usr/local/bin/php54 ln -s /usr/local/php54/bin/php-cgi /usr/local/bin/php54-cgi New installed version: php54-cgi -m [PHP Modules] bz2 calendar cgi-fcgi Core ctype curl date dom ereg exif fileinfo filter ftp gd gettext hash iconv intl json libxml mbstring mhash mysql mysqli mysqlnd openssl pcntl pcre PDO pdo_mysql pdo_sqlite Phar posix readline Reflection session shmop SimpleXML sockets SPL sqlite3 standard sysvmsg sysvsem sysvshm tokenizer wddx xml xmlreader xmlwriter xsl zip zlib [Zend Modules]

  Read the article

• Cygwin's RSYNC for large data transfer

  - by Tim Brigham

  I'm using rsync from Cygwin to do a large scale data transfer from an aging HP MSA 1000 to a new DAS attached to a different server. I have a daemon running on the remote server in read only mode and a local copy writing the files to disk. One of my servers is an image repository with over a million files spread across about 300 directories. Each file averages only a couple hundred kilobytes. More so than any other box this one is proving problematic. The rsync process will work for a while - some times 20 minutes, some times an hour - and then it simply quits and sits idle at a given file name. I have verified that the file isn't corrupt on the remote server and that the file is successfully created on the local drive. I ran the rsync client in -vv mode, which returns nothing. I checked out the logs created by the daemon. I looked at the network utilization on the interface, which is sitting idle. I looked at the AV settings to see if anything could pose a problem there. I even updated to the latest release of Cygwin. What do I need to in order to keep this connection up? EDIT: The client system is using the command rsync.exe server::Drives/f/Repo/ /cygdrive/T/Repo --archive -P -vv The server is using the command rsync.exe --daemon --no-detach --config "rsyncd.conf" The contents of rsyncd.conf: use chroot = false strict modes = false hosts allow = 192.168.100.9 log file = c:/rsyncd.log uid=0 gid=0 [Drives] path = /cygdrive read only = yes EDIT: The file server is 2003, the disk type on the array is GPT and the size is of the array is about 4 TB. EDIT: Stranger.. It looks like the process is reliably erroring out at about 175,000 files. Rsync runs fine when I pick the same directory it has problems with one at a time. EDIT: rsync version 3.0.9 protocol version 30 Copyright (C) 1996-2011 by Andrew Tridgell, Wayne Davison, and others. Web site: http://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints, no socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace, append, ACLs, xattrs, iconv, symtimes A similar failure occurred when going from the same set of files with Cygwin to a Linux install. It didn't happen until several hours later than normal however.

  Read the article

• Routing all data through an VPN tunnel with ppp

  - by Oliver

  I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

  Read the article

• Any way to recover ext4 filesystems from a deleted LVM logical volume?

  - by Vegar Nilsen

  The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

  Read the article

• LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

  - by Stefan M

  I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

  Read the article

• What is the difference between "data hiding" and "encapsulation"?

  - by Software Engeneering Learner

  I'm reading "Java concurrency in practice" and there is said: "Fortunately, the same object-oriented techniques that help you write well-organized, maintainable classes - such as encapsulation and data hiding -can also help you create thread-safe classes." The problem #1 - I never heard about data hiding and don't know what it is. The problem #2 - I always thought that encapsulation is using private vs public, and is actually the data hiding. Can you please explain what data hiding is and how it differs from encapsulation?

  Read the article

• Correcting tree from messed up file tree in NTFS partition

  - by Fullmooninu

  It's a real messed situation, but I'm quite at the end of my options. It's my personal hardrive, so it's very important for me, and yes, I have no backup =( The short story: 1) I have two discs. One with Windows, and another where I had a bit of empty space at the front of the disk, so i could install Linux. The rest was occupied by a 1.8TB NTFS partition filled with data. 2) I installed Linux, and after a while realized there was not enough space for everything, so I tried using Gparted, and told it to re-size the NTFS partition, to a lesser size. 3) The system jammed. I had to reboot and broke the Resizing operation. Here's what I did to fix it: a) Rebooted into Linux Live, and used Testdisk,to deep analyze the disk, and recover the possible partitions. It found several versions of the NTFS partitions, probably made during the resizing. I told Testdisk to open every one of them, and only one could list its files. When trying to open the other options on Testdisk, it showed an error message. I assumed the one without errors, to be the correct one, and I told Testdisk to recover the partition, and write a new MBR. b) The partition had errors, and Linux has a NTFS fixing tool, used it, but the system still had errors. c) So I booted into windows and use chkdsk to correct all errors in the partition. d) Everything seems fine, but now, back in Windows, when I open one file, it opens another file, or part of another file. As in, some files took up the position of other files. What I think happened is that I recovered an old tree, and not the most current one. And that one just happened to be intact, while the most recent one was damaged. As such, the files that were moved during the failed resizing, were now, during the automatic correction, assumed wrongly to be in their correct places. So when I open a file, it tries to open another one. Radiohead - Creep.mp3 will open and it will actually be a bit from another song, or even code from a jpg. Some files seem to be all right, but others have seemed to have had their position taken by others. Anyone knows of something really powerful that can help me solve this?

  Read the article

• Increase Max Pool Size ERROR when using SYBASE ASE ADO.NET data provider

  - by Brani

  I have made a program in VB.net (visual studio 2003) that connects to a SYBASE ASE database using the ADO.NET data provider. Recently, after a hard disk failure, I restored the program's code from a (rather old) backup. But now the connection fails with a message that does not remind me of anything that I have seen before. Here is the code and the error message: Dim cn As New AseConnection("Data Source='my_server';Port='5000';UID='sa';PWD='my_pwd';Database='my_db';") cn.Open() Error message: Sybase.Data.AseClient.AseException - Cannot allocate more connections. Connection pool is at maximum. Increase Max Pool Size Can anybody help me?

  Read the article

• How to remove "VsDebuggerCausalityData" data from SOAP message?

  - by scottmarlowe

  I've got a problem where incoming SOAP messages from one particular client are being marked as invalid and rejected by our XML firewall device. It appears extra payload data is being inserted by Visual Studio; we're thinking the extra data may be causing a problem b/c we're seeing "VsDebuggerCausalityData" in these messages but not in others sent from a different client who is not having a problem. It's a starting point, anyway. The question I have is how can the client remove this extra data and still run from VS? Why is VS putting it in there at all? Thanks.

  Read the article

• How to convert CFDataRef data to UIImage / NSData - Iphone

  - by sagar

  Hello ! every one. I am having a little query regarding CFData in Objective C / iPhone Development. See, Apple documentation has following method for CGPDFStream CGPDFStreamCopyData(<#CGPDFStreamRef stream#>, <#CGPDFDataFormat *format#>) Above method return type is CGDataRef. I have data as stream. Now I wish to convert in image. & For that I think I should follow this way. CGPDFDataFormat t=CGPDFDataFormatJPEG2000; CFDataRef data = CGPDFStreamCopyData (stream, &t); After executing above statements - I have some reference in data variable. Now my Query is - How to convert this CFData to NSData or UIImage ? I have gone through the documentation of apple - But I am failure to find it. Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Expose DB2 data as XML / Query DB2via XML

  - by Anthony Gatlin

  I have a client who has a sort of data warehouse stored in DB2. For a variety of reasons, the data must remain on this platform. The client is considering implementing an open-source CMS (Drupal) which runs in MySQL. The client needs to be able to execute a bunch of pre-defined queries against the DB2 database from the remote application. Drupal appears to interact well with XML data from other systems. It was suggested that we use something like XML-RPC to execute the queries against DB2. I am very familiar with SQL Server and pretty familiar with MySQL, but I have no experience with DB2 and no understanding of its capabilities or limitations. Is there any way that we can use something like XML, XML-RPC, or even http to initiate queries against a DB2 database? Any ideas are appreciated! Thank you!

  Read the article

• Populating Tcl Treeview with Sqlite Data

  - by DFM

  Hello: I am building a Tcl application that reads off of a Sqlite Db. Currently, I can enter data into the database using the Tcl frontend. Now, I am trying to figure out how to display the data within the Sqlite Db from the Tcl frontend. After a little bit of research, I found that the treeview widget would work well for my needs. I now have the following code: set z1 [ttk::treeview .c1.t1 -columns {1 2} -show headings] $z1 heading #1 -text "First Name" $z1 heading #2 -text "Last Name" proc Srch {} {global z1 sqlite3 db test.db pack $z1 db close } When the "Srch" procedure is executed (button event), the treeview (z1) appears with the headings First Name and Last Name. Additionally, the Sqlite Db gets connected, then closes. I wanted to add code that would populate the treeview from the Sqlite Db between connecting to the Db and packing the treeview (z1). Does anyone know the correct syntax to populate a Tcl treeview with data from Sqlite? Thank you everyone in advance, DFM

  Read the article

• Mapping JSON data in JQGrid

  - by hunt

  Hi , I am using jqGrid 3.6.4 and a jquery 1.4.2 . in my sample i am getting following json data format & i want to map these json data into rows of a jqgrid { "page": "1", "total": 1, "records": "6", "rows": [ { "head": { "student_name": "Mr S. Jack ", "year": 2007 }, "sub": [ { "course_description": "Math ", "date": "22-04-2010", "number": 1, "time_of_add": "2:00", "day": "today" } ] } ] } my jqgrid code is as follows jQuery("#"+subgrid_table_id).jqGrid({ url:"http://localhost/stud/beta/web/GetStud.php?sid="+sid, dtatype: "json", colNames: ['Stud Name','Year','Date'.'Number'], colModel: [ {name:'Stud Name',index:'student_name', width:100, jsonmap:"student_name"}, {name:'Year',index:'year', width:100, jsonmap:"year"}, {name:'Date',index:'date', width:100, jsonmap:"date"}, {name:'Number',index:'number', width:100, jsonmap:"number"} ], height:'100%', jsonReader: { repeatitems : false, root:"head" }, }); So now the problem is as my data i.e. student_name and year is under "head" , the jqgrid is enable to locate these two fields. at the same time other two column values i.e. Date and Number lies under "sub" and even those columns i am not be able to map it with jqgrid so kindly help me how to located these attributes in JQGrid. Thanks

  Read the article

• ADO.NET Entity Framework with OLE DB Access Data Source

  - by Tim Long

  Has anyone found a way to make the ADO.NET Entity Framework work with OLE DB or ODBC data sources? Specifically, I need to work with an Access database that for various reasons can't be upsized to SQL. This MSDN page says: The .NET Framework includes ADO.NET providers for direct access to Microsoft SQL Server (including Entity Framework support), and for indirect access to other databases with ODBC and OLE DB drivers (see .NET Framework Data Providers). For direct access to other databases, many third-party providers are available as shown below. The reference to "indirect access to other databases" is tantalising but I confess that I am hopelessly confused by all the different names for data access technology.

  Read the article

• Remote Backup User Data on iPhone

  - by Eric

  I wrote a few iPhone apps using Core Data for persistent storage. Everything is working great but I would like to add the ability for users to back up their data to a PC (via WiFi to a PC app) or to a web server. This is new to me and I can't seem to figure out where to begin researching the problem. I don't want to overcomplicate the issue if there is an easy way to implement this. Is anyone familiar enough with what I am looking to do to point me in the right direction or give me a high level overview of what I should be considering? The data is all text and would be perfectly stored in .csv files if that matters.

  Read the article

• IE8 + Jquery ajax call giving parsererror : for json data which seems valid in Firefox

  - by PlanetUnknown

  The ajax call works fine in FF. the data returned is in JSON here is an example from FF firebug - {"noProfiles": "No profiles have been created, lets start now !"} When I try to print the error in IE8 (& in compatibility modes as well), it says "parsererror". But the output seems to be valid JSON. Here is the ajax function call I'm making. Any pointers would be great ! $.ajax({ type: "GET", url: "/get_all_profile_details/", data: "", dataType: "json", beforeSend: function() {alert("before send called");}, success: function(jsonData) { alert("data received"); }, error: function(xhr, txt, err){ alert("xhr: " + xhr + "\n textStatus: " + txt + "\n errorThrown: " + err); } }); The alerts in the error function above give - xhr:<blank> textstatus:parsererror errorThrown: undefined Any pointers would be great ! Note : jquery : 1.3.2

  Read the article

• Django data migration when changing a field to ManyToMany

  - by Ken H

  I have a Django application in which I want to change a field from a ForeignKey to a ManyToManyField. I want to preserve my old data. What is the simplest/best process to follow for this? If it matters, I use sqlite3 as my database back-end. If my summary of the problem isn't clear, here is an example. Say I have two models: class Author(models.Model): author = models.CharField(max_length=100) class Book(models.Model): author = models.ForeignKey(Author) title = models.CharField(max_length=100) Say I have a lot of data in my database. Now, I want to change the Book model as follows: class Book(models.Model): author = models.ManyToManyField(Author) title = models.CharField(max_length=100) I don't want to "lose" all my prior data. What is the best/simplest way to accomplish this? Ken

  Read the article

• DVCS and data loss?

  - by David Wolever

  After almost two years of using DVCS, it seems that one inherent "flaw" is accidental data loss: I have lost code which isn't pushed, and I know other people who have as well. I can see a few reasons for this: off-site data duplication (ie, "commits have to go to a remote host") is not built in, the repository lives in the same directory as the code and the notion of "hack 'till you've got something to release" is prevalent... But that's beside the point. I'm curious to know: have you experienced DVCS-related data loss? Or have you been using DVCS without trouble? And, related, apart from "remember to push often", is there anything which can be done to minimize the risk?

  Read the article

• Merging/filling pdf form file with xml data

  - by Giorgi

  Hello, Let's say I have a pdf form file available at website which is filled by the users and submitted to the server. On the server side (Asp.Net) I would like to merge the data that I receive in xml format with the empty pdf form that was filled and save it. As I have found there are several possible ways of doing it: Using pdf form created by adobe acrobat and filling it with itextsharp. Using pdf form created by adobe acrobat and filling it with FDF Toolkit .net (which seems to be using itextsharp internally) Usd pdfkt to fill the form. Use pdf form file created with adobe livecycle and merge the data by using Form Data Integration Service As I have no experience with this kind of task can you advise which option would be better/easier and give some additional tips? Thank you in advance.

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >