Search Results

Search found 6030 results on 242 pages for 'quick poll'.

Page 216/242 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Severe mysqldump performance degradation using Centos Linux, 8GB PAE and MySQL 5.0.77

  - by Duncan Harris

  We use MySQL 5.0.77 on CentOS 5.5 on VMWare: Linux dev.ic.soschildrensvillages.org.uk 2.6.18-194.11.4.el5PAE #1 SMP Tue Sep 21 05:48:23 EDT 2010 i686 i686 i386 GNU/Linux We have recently upgraded from 4GB RAM to 8GB. When we did this the time of our mysqldump overnight backup jumped from under 10 minutes to over 2 hours. It also caused unresponsiveness on our plone based web site due to database load. The dump is using the optimized mysqldump format and is spooled directly through a socket to another server. Any ideas on what we could do to fix gratefully appreciated. Would a MySQL upgrade help? Anything we can do to MySQL config? Anything we can do to Linux config? Or do we have to add another server or go to 64-bit? We ran a previous (non-virtual) server on 6GB PAE and didn't notice a similar issue. This was on same MySQL version, but Centos 4.4. Server config file: [mysqld] port=3307 socket=/tmp/mysql_live.sock wait_timeout=31536000 interactive_timeout=31536000 datadir=/var/mysql/live/data user=mysql max_connections = 200 max_allowed_packet = 64M table_cache = 2048 binlog_cache_size = 128K max_heap_table_size = 32M sort_buffer_size = 2M join_buffer_size = 2M lower_case_table_names = 1 innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=1G innodb_log_file_size=300M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table [mysqldump] # Do not buffer the whole result set in memory before writing it to # file. Required for dumping very large tables quick max_allowed_packet = 64M [mysqld_safe] # Increase the amount of open files allowed per process. Warning: Make # sure you have set the global system limit high enough! The high value # is required for a large number of opened tables open-files-limit = 8192 Server variables: mysql> show variables; +---------------------------------+------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-5.0.77-linux-i686-glibc23/ | | binlog_cache_size | 131072 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-5.0.77-linux-i686-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 10 | | datadir | /var/mysql/live/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | keep_files_on_create | OFF | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | ft_boolean_syntax | + -><()~*:""&| | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | YES | | have_compress | YES | | have_crypt | YES | | have_csv | YES | | have_dynamic_loading | YES | | have_example_engine | NO | | have_federated_engine | YES | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_merge_engine | YES | | have_ndbcluster | DISABLED | | have_openssl | DISABLED | | have_ssl | DISABLED | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | hostname | app.ic.soschildrensvillages.org.uk | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 1048576 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 1073741824 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | ibdata1:10M:autoextend | | innodb_data_home_dir | | | innodb_adaptive_hash_index | ON | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | ON | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 314572800 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | ./ | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_rollback_on_timeout | OFF | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 8 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 31536000 | | join_buffer_size | 2097152 | | key_buffer_size | 8384512 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-5.0.77-linux-i686-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | lc_time_names | en_US | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | OFF | | log_bin_trust_function_creators | OFF | | log_error | | | log_queries_not_using_indexes | OFF | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 1 | | max_allowed_packet | 67108864 | | max_binlog_cache_size | 4294963200 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 200 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 33554432 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_prepared_stmt_count | 16382 | | max_relay_log_size | 0 | | max_seeks_for_key | 4294967295 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 4294967295 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 2146435072 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | ndb_autoincrement_prefetch_sz | 1 | | ndb_force_send | ON | | ndb_use_exact_count | ON | | ndb_use_transactions | ON | | ndb_cache_check_time | 0 | | ndb_connectstring | | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 8192 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /var/mysql/live/mysqld.pid | | plugin_dir | | | port | 3307 | | preload_buffer_size | 32768 | | profiling | OFF | | profiling_history_size | 15 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 4096 | | read_buffer_size | 131072 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log | | | relay_log_index | | | relay_log_info_file | relay-log.info | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | secure_file_priv | | | server_id | 0 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql_live.sock | | sort_buffer_size | 2097152 | | sql_big_selects | ON | | sql_mode | | | sql_notes | ON | | sql_warnings | OFF | | ssl_ca | | | ssl_capath | | | ssl_cert | | | ssl_cipher | | | ssl_key | | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | system_time_zone | GMT | | table_cache | 2048 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 0 | | thread_stack | 196608 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | /tmp/ | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.77 | | version_comment | MySQL Community Server (GPL) | | version_compile_machine | i686 | | version_compile_os | pc-linux-gnu | | wait_timeout | 31536000 | +---------------------------------+------------------------------------------------------------------+ 237 rows in set (0.00 sec)

  Read the article

• OpenVPN on Tomato and Vista - can't see my network

  - by Ian

  I followed the instructions here (http://todayguesswhat.blogspot.ca/2011/03/quick-simple-vpn-setup-guide-using.html) to set up a TCP connection to OpenVPN on my Tomato router. Used TCP because the place I usually surf at seems to have the other ports blocked. My Vista laptop is able to connect to the router but I don't appear to be getting an IP address. I'm able to access my router's admin page, but I can't see the network at home. When I browse to Whatsmyip I see my home IP. Here are the results of route print -4 when I'm just connect to the library and when I've fired up the VP connection as well: Library only: =========================================================================== Interface List 22 ...00 ff c4 a0 e7 5c ...... TAP-Win32 Adapter V9 15 ...00 23 4e 20 b3 64 ...... Atheros AR9281 Wireless Network Adapter 10 ...00 23 8b 39 ec 71 ...... Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller 1 ........................... Software Loopback Interface 1 11 ...00 00 00 00 00 00 00 e0 isatap.{834A8A0A-5E2C-47D0-9673-7965DE8B5470} 14 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 20 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 18 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 19 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 23 ...00 00 00 00 00 00 00 e0 isatap.{C4A0E75C-765E-4F7D-A55C-77945779816A} 34 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Library and TCP OpenVPN: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.116 30 0.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 24.212.205.68 255.255.255.255 10.1.29.1 10.1.29.117 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 192.168.1.0 255.255.255.0 On-link 192.168.1.116 286 192.168.1.116 255.255.255.255 On-link 192.168.1.116 286 192.168.1.255 255.255.255.255 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.116 286 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Thanks for any advice. I looked at one of the answers but I'm not sure if it applied to me as it said that 10...* was the vpn connection, but I appear to have 10...* when I connect just to the library.

  Read the article

• Windows 7 inbuilt and 3rd party (de)fragmentation related queries

  - by Karan

  I have a pretty good idea of how files end up getting fragmented. That said, I just copied ~3,200 files of varying sizes (from a few KB to ~20GB) from an external USB HDD to an internal, freshly formatted (under Windows 7 x64), NTFS, 2TB, 5400RPM, WD, SATA, non-system (i.e. secondary) drive, filling it up 57%. Since it should have been very much possible for each file to have been stored in one contiguous block, I expected the drive to be fragmented not more than 1-2% at most after this rather lengthy exercise (unfortunately this older machine doesn't support USB 3.0). Windows 7's inbuilt defrag utility told me after a quick analysis that the drive was fragmented only 1% or so, which dovetailed neatly with my expectations. However, just out of curiosity I downloaded and ran the latest portable x64 version of Piriform's Defraggler, and was shocked to see the drive being reported as being ~85% fragmented! The portable version of Auslogics Disk Defrag also agreed with Defraggler, and both clearly expected to grind away for ~10 hours to completely defragment the drive. 1) How in blazes could the inbuilt and 3rd party defrag utils disagree so badly? I mean, 10-20% variance is probably understandable, but 1% and 85% are miles apart! This Engineering Windows 7 blog post states: In Windows XP, any file that is split into more than one piece is considered fragmented. Not so in Windows Vista if the fragments are large enough – the defragmentation algorithm was changed (from Windows XP) to ignore pieces of a file that are larger than 64MB. As a result, defrag in XP and defrag in Vista will report different amounts of fragmentation on a volume. ... [Please read the entire post so the quote is not taken out of context.] Could it simply be that the 3rd party defrag utils ignore this post-XP change and continue to use analysis algos similar to those XP used? 2) Assuming that the 3rd party utils aren't lying about the real extent of fragmentation (which Windows is downplaying post-XP), how could the files have even got fragmented so badly given they were just copied over afresh to an empty drive? 3) If vastly differing analysis algos explain the yawning gap, which do I believe? I'm no defrag fanatic for sure, but 85% is enough to make me seriously consider spending 10 hours defragging this drive. On the other hand, 1% reported by Windows' own defragger clearly implies that there is no cause for concern and defragging would actually have negative consequences (as per the post). Is Windows' assumption valid and should I just let it be, or will there be any noticeable performance gains after running one of the 3rd party utils for 10 hours straight? 4) I see that out of the box Windows 7 defrag is scheduled to run weekly. Does anyone know whether it defrags every single time, or only if its analysis reveals a fragmentation percentage over a set threshold? If the latter, what is this threshold and can it be changed, maybe via a Registry edit? Thanks for reading through (my first query on this wonderful site!) and for any helpful replies. Also, if you're answering question #3, please keep in mind that any speed increases post defragging with 3rd party utils vis-à-vis Windows' inbuilt program should not include pre-Vista (preferably pre-Win7) examples. Further, examples of programs that made your system boot faster won't help in this case, since this is a non-system drive (although one that'll still be used daily).

  Read the article

• Using different SSDs types (not only SATA based) as system drive

  - by Hubert Kario

  Currently I have a Thinkpad X61s and want to make it both a bit faster and a bit more power efficient. For that reason I thought that adding SSD drive would make most sense. Unfortunately, because of financial reasons, buying SSD of over 200GB capacity is out of reach for me (not only it would be worth more than the rest of the laptop, but also I currently have a 500GB drive in it, so even such a drive would be kind of a downgrade for me). During preliminary testing with a cheap Transcend 4GB Class 6 (14MiB/s streaming, 9MiB/s random read) card I experienced boot times to be reduced by half so putting the OS only on it would already would be an improvement. Unfortunately, my system now is about 11GiB in size so anything less than 16GB would be constraining. In this laptop I can connect additional drives on at least 5 different ways: using SATA-ATA converter caddy in the X6 Ultrabase using internal mini PCIe slot using integrated SDHC slot using CardBus (a.k.a PCMCIA or PC Card) slot using USB Thankfully, because I use only Linux on this PC the bootability of them is irrelevant as I can put the /boot partition on internal HDD and / on any of the above mentioned Flash memories (as I already did for the SDHC test). From what I was able to research and from my own experience those options come with rather big downsides or other problems: SATA-ATA caddy It has three downsides: I have to carry the Ultrabse with me at all times (it's not really inconvenient, but those grams do add) and couldn't disconnect it when I want to disconnect the battery It makes the bay unusable for the optical drive and occasional quick access to other hard drives the only caddies I could buy have rather flaky controllers in them so putting my OS on it would hamper its stability Internal mini PCIe slot This would be an ideal solution, if only I could find real PCIe SSDs, not only devices that could talk only SATA or ATA over PCIe mechanical connection (the ones used in Dell Mini or Asus EEE). Theoretically Samsung did release such devices but I couldn't find them in retail anywhere. Integrated SDHC slot It's a nice solution with a single drawback: the fastest 16GB SDHC card on the market can only do around 35MiB/s read and 15MiB/s write while still costing like a normal 40GB SATA SSD that's 10 times faster. Not really cost-effective. CardBus (a.k.a PCMCIA or PC Card) slot Those cards are much faster than the SDHC option (there are ones that can do well over 50MiB/s read in benchmarks) and from what I could find the PCMCIA controller in my laptop does support UDMA so it should be able to deliver comparable speeds. They still cost similarly to SD cards but at least they provide streaming performance comparable to my current HDD. USB That's the worst option. Not only is it limited to 20-30MiB/s by the interface itself the drive would stick out of the laptop so it's a big no no. The question As such I think that going the "CF in a CardBus adapter" route will be the best option. My question is: did anyone try using CF cards in CardBus adapters as system drives with Linux on Thinkpad laptops? Laptops in general? What was the real-world performance? I don't have any CF cards so I can't check how well does it work with suspend/resume, or whatever it's easy to make it work in initramfs (I'm using ArchLinux and SD card was trivial — add 3 modules in single config line and rebuilding initramfs) so any tips/gotchas on this are welcome as well.

  Read the article

• Why does my computer run slowly and freeze sometimes?

  - by Brae

  EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

  Read the article

• Issues Converting Plain Text Into Microsoft Word Bulleted Lists

  - by user787832

  I'm a programmer. I hate status reports. I found a way to live with it. While I am working in my IDE ( Visual Slickedit ) I keep a plain text file open in one of the file/buffer tabs. As I finish things I just jot down a quick note into that file. At the end of the week that becomes my weekly status report. Example entries: The Datatables.net plugin runs very slowly in IE 8 with more than 2,000 records. I changed the way I did the server side code to process the data to make less work for the plugin to get decent performance for the IE 8 users. I made a class to wrap data from the new data collection objects into the legacy data holder objects. This will let the new database code be backward compatible with the legacy code until we can replace it. I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site At the end of the month I go back to each weekly *.txt file and paste all of the entries into a MS Word file for a monthly report. I give the monthly report to a liason to the contracting company who has to compile everyone's monthly reports into a single MS Word 2007 document. His problem, soon to be my problem, comes when he highlights my paragraphs like the ones above to put bullets in front of my paragraphs. When he highlights my notes to put bullets in front of them with MS Word 2007, Word rearranges the text a bit and the new line chars/carriage returns stagger the text so the text is no longer in neat chunks. This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site Becomes This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site I tried turning word wrap on in my IDE for the text files I put my status notes in. It just puts some kind of newline character in anyway. Searching/Replacing those chars in the text files has the result of destroying the paragraphs. Once my notes are pasted into MS Word, Word automatically translates them into paragraph breaks. Searching/Replacing them there has similar results. Blank lines separating the notes disappears. One big mess. What I would like is to be able to keep adding my status notes to a text file as I am now, but do something different when I paste the notes into MS Word such that my liason can select the text, hit the bulleting command and NOT have the staggered text as shown above. Any ideas? Thanks much in advance Steve

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• What's the difference between find and findstr commands in Windows?

  - by Prashant Bhate

  In Windows, what are the differences between find and findstr commands? Both seems to search text in files: find c:\>find /? Searches for a text string in a file or files. FIND [/V] [/C] [/N] [/I] [/OFF[LINE]] "string" [[drive:][path]filename[ ...]] /V Displays all lines NOT containing the specified string. /C Displays only the count of lines containing the string. /N Displays line numbers with the displayed lines. /I Ignores the case of characters when searching for the string. /OFF[LINE] Do not skip files with offline attribute set. "string" Specifies the text string to find. [drive:][path]filename Specifies a file or files to search. If a path is not specified, FIND searches the text typed at the prompt or piped from another command. findstr c:\>findstr /? Searches for strings in files. FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file] [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]] strings [[drive:][path]filename[ ...]] /B Matches pattern if at the beginning of a line. /E Matches pattern if at the end of a line. /L Uses search strings literally. /R Uses search strings as regular expressions. /S Searches for matching files in the current directory and all subdirectories. /I Specifies that the search is not to be case-sensitive. /X Prints lines that match exactly. /V Prints only lines that do not contain a match. /N Prints the line number before each line that matches. /M Prints only the filename if a file contains a match. /O Prints character offset before each matching line. /P Skip files with non-printable characters. /OFF[LINE] Do not skip files with offline attribute set. /A:attr Specifies color attribute with two hex digits. See "color /?" /F:file Reads file list from the specified file(/ stands for console). /C:string Uses specified string as a literal search string. /G:file Gets search strings from the specified file(/ stands for console). /D:dir Search a semicolon delimited list of directories strings Text to be searched for. [drive:][path]filename Specifies a file or files to search. Use spaces to separate multiple search strings unless the argument is prefixed with /C. For example, 'FINDSTR "hello there" x.y' searches for "hello" or "there" in file x.y. 'FINDSTR /C:"hello there" x.y' searches for "hello there" in file x.y. Regular expression quick reference: . Wildcard: any character * Repeat: zero or more occurances of previous character or class ^ Line position: beginning of line $ Line position: end of line [class] Character class: any one character in set [^class] Inverse class: any one character not in set [x-y] Range: any characters within the specified range \x Escape: literal use of metacharacter x \<xyz Word position: beginning of word xyz\> Word position: end of word For full information on FINDSTR regular expressions refer to the online Command Reference.

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• Can spliting an access database cause printer and reporting issues?

  - by leeand00

  We have a setup in which our users log into an access database using MS Access 2003 over an RDP connection. The user's login to their own machines first using a roaming profile. They then click an rdp connection file on the desktop and login to the remote server, via RDP, where they use MS Access as the shell; they don't have any access to any of explorer.exe features such as the start menu. The database they are logging into is more of an application, and provides functionality for entering data, querying data, and running reports via form based menus. It all worked pretty well until we split the database as it was nearing 2GBs in size. We moved out the payroll data into a separate partition, a database with the same name in a different folder, both of them on the server. Only two tables were moved into this new database partition, and they were re-linked as external tables in the new partition. Now while everything appears to be working fine data-wise after the split, there's a new issue when our users login via RDP and attempt to run reports: often the report will not display and instead the user sees an error about the click event of the form. At first I didn't even know it was printer-related, as we didn't really change anything related to the printers as far as I knew. Confused about the error, I talked to the guy who previously worked here and who was in charge of splitting the database, and he told me to tell the users to set their default printers (on their local machines, not on the server) to the "printer" Microsoft XPS Document Writer which isn't a physical printer at all. This allowed the user's to display their reports, but if they want to print out reports, they are required to go to the File menu and select Print, clicking the print icon on the toolbar takes them to a Save As... dialog as would be expected when using the Microsoft XPS Document Writer as your default printer. It's easy to tell if the user is having a problem because a quick mouseover of the printer icon will yield a tooltip of (none) when they cannot access their reports, and a tooltip of Microsoft XPS Document Writer when they can view the reports. If the user's printer is set to anything other than Microsoft XPS Document Writer as the default on their local machine, then (none) is always displayed when they rdp to the database. The RDP settings are setup to transfer the local printer to the server. Telling the users to do this to print has been more of a band-aid on the whole situation until we find a better solution and an explanation as to why splitting a database would prevent users from printing or even viewing access database reports. Which is why I'm here asking this question. Also of note all the printers on the network now show up on the server so that when the users do click File->Print to print their reports on a physical printer, they have to look through a huge list of printers to find theirs in the dropdown. So the little band-aid fix we have is not ideal. Previously, only the printers on the user's local machine displayed here, and not all the printers on the network. My co-worker seems to think this has something to do with permissions, I personally think it has to do with roaming profiles, and Group Policies which is what I've been reading up on. I really don't know how to fix this or how it is related to splitting the database.

  Read the article

• mySQL Optimization Suggestions

  - by Brian Schroeter

  I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

  Read the article

• Silverlight animation not smooth

  - by Andrej

  Hi, When trying to animate objects time/frame based in Silverlight (in contrast to using something like DoubleAnimation or Storyboard, which is not suitable e.g. for fast paced games), for example moving a spaceship in a particular direction every frame, the movement is jumpy and not really smooth. The screen even seems to tear. There seems to be no difference between CompositionTarget and DistpatcherTimer. I use the following approach (in pseudocode): Register Handler to Tick-Event of a DispatcherTimer In each Tick: Compute the elapsed time from the last frame in milliseconds Object.X += movementSpeed * ellapsedMilliseconds This should result in a smooth movement, right? But it doesn't. Here is an example (Controls: WASD and Mouse): Silverlight Game. Although the effect I described is not too prevalent in this sample, I can assure you that even moving a single rectangle over a canvas produces a jumpy animation. Does someone have an idea how to minimize this. Are there other approaches to to frame based animation exept using Storyboards/DoubleAnimations which could solve this? Edit: Here a quick and dirty approach, animating a rectangle with minimum code (Controls: A and D) Animation Sample Xaml: <Grid x:Name="LayoutRoot" Background="Black"> <Canvas Width="1000" Height="400" Background="Blue"> <Rectangle x:Name="rect" Width="48" Height="48" Fill="White" Canvas.Top="200" Canvas.Left="0"/> </Canvas> </Grid> C#: private bool isLeft = false; private bool isRight = false; private DispatcherTimer timer = new DispatcherTimer(); private double lastUpdate; public Page() { InitializeComponent(); timer.Interval = TimeSpan.FromMilliseconds(1); timer.Tick += OnTick; lastUpdate = Environment.TickCount; timer.Start(); } private void OnTick(object sender, EventArgs e) { double diff = Environment.TickCount - lastUpdate; double x = Canvas.GetLeft(rect); if (isRight) x += 1 * diff; else if (isLeft) x -= 1 * diff; Canvas.SetLeft(rect, x); lastUpdate = Environment.TickCount; } private void UserControl_KeyDown(object sender, KeyEventArgs e) { if (e.Key == Key.D) isRight = true; if (e.Key == Key.A) isLeft = true; } private void UserControl_KeyUp(object sender, KeyEventArgs e) { if (e.Key == Key.D) isRight = false; if (e.Key == Key.A) isLeft = false; } Thanks! Andrej

  Read the article

• Nhibernate 2.1 and mysql 5 - InvalidCastException on Setup

  - by Nash

  Hello there, I am trying to use NHibernate with Spring.Net und mySQL 5. However, when setting up the connection and creating the SessionFactoryObject, I get this InvalidCastException: NHibernate seems to cast MySql.Data.MySqlClient.MySqlConnection to System.Data.Common.DbConnection which causes the exception. System.InvalidCastException wurde nicht behandelt. Message="Das Objekt des Typs \"MySql.Data.MySqlClient.MySqlConnection\" kann nicht in Typ \"System.Data.Common.DbConnection\" umgewandelt werden." Source="NHibernate" StackTrace: bei NHibernate.Tool.hbm2ddl.SuppliedConnectionProviderConnectionHelper.Prepare() in c:\CSharp\NH\nhibernate\src\NHibernate\Tool\hbm2ddl\SuppliedConnectionProviderConnectionHelper.cs:Zeile 25. bei NHibernate.Tool.hbm2ddl.SchemaMetadataUpdater.GetReservedWords(Dialect dialect, IConnectionHelper connectionHelper) in c:\CSharp\NH\nhibernate\src\NHibernate\Tool\hbm2ddl\SchemaMetadataUpdater.cs:Zeile 43. bei NHibernate.Tool.hbm2ddl.SchemaMetadataUpdater.Update(ISessionFactory sessionFactory) in c:\CSharp\NH\nhibernate\src\NHibernate\Tool\hbm2ddl\SchemaMetadataUpdater.cs:Zeile 17. bei NHibernate.Impl.SessionFactoryImpl..ctor(Configuration cfg, IMapping mapping, Settings settings, EventListeners listeners) in c:\CSharp\NH\nhibernate\src\NHibernate\Impl\SessionFactoryImpl.cs:Zeile 169. bei NHibernate.Cfg.Configuration.BuildSessionFactory() in c:\CSharp\NH\nhibernate\src\NHibernate\Cfg\Configuration.cs:Zeile 1090. bei OrmTest.Program.Main(String[] args) in C:\Users\Max\Documents\Visual Studio 2008\Projects\OrmTest\OrmTest\Program.cs:Zeile 24. bei System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) bei System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) bei Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() bei System.Threading.ThreadHelper.ThreadStart_Context(Object state) bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) bei System.Threading.ThreadHelper.ThreadStart() InnerException: I am using the programmatically setup approach in order to get a quick NHibernate Setup. Here is the setup Code: Configuration config = new Configuration(); Dictionary props = new Dictionary(); props.Add("dialect", "NHibernate.Dialect.MySQL5Dialect"); props.Add("connection.provider", "NHibernate.Connection.DriverConnectionProvider"); props.Add("connection.driver_class", "NHibernate.Driver.MySqlDataDriver"); props.Add("connection.connection_string", "Server=localhost;Database=orm_test;User ID=root;Password=password"); props.Add("proxyfactory.factory_class", "NHibernate.ByteCode.Spring.ProxyFactoryFactory, NHibernate.ByteCode.Spring"); config.AddProperties(props); config.AddFile("Person.hbm.xml"); ISessionFactory factory = config.BuildSessionFactory(); ISession session = factory.OpenSession(); Is something missing? I downloaded the current mysql Connector from the mysql Website.

  Read the article

• Entity Framework SaveChanges error details

  - by Marek Karbarz

  When saving changes with SaveChanges on a data context is there a way to determine which Entity causes an error? For example, sometimes I'll forget to assign a date to a non-nullable date field and get "Invalid Date Range" error, but I get no information about which entity or which field it's caused by (I can usually track it down by painstakingly going through all my objects, but it's very time consuming). Stack trace is pretty useless as it only shows me an error at the SaveChanges call without any additional information as to where exactly it happened. Note that I'm not looking to solve any particular problem I have now, I would just like to know in general if there's a way to tell which entity/field is causing a problem. Quick sample of a stack trace as an example - in this case an error happened because CreatedOn date was not set on IAComment entity, however it's impossible to tell from this error/stack trace [SqlTypeException: SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.] System.Data.SqlTypes.SqlDateTime.FromTimeSpan(TimeSpan value) +2127345 System.Data.SqlTypes.SqlDateTime.FromDateTime(DateTime value) +232 System.Data.SqlClient.MetaType.FromDateTime(DateTime dateTime, Byte cb) +46 System.Data.SqlClient.TdsParser.WriteValue(Object value, MetaType type, Byte scale, Int32 actualLength, Int32 encodingByteSize, Int32 offset, TdsParserStateObject stateObj) +4997789 System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj, Boolean isCommandProc) +6248 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +987 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +162 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +32 System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +141 System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +12 System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior) +10 System.Data.Mapping.Update.Internal.DynamicUpdateCommand.Execute(UpdateTranslator translator, EntityConnection connection, Dictionary`2 identifierValues, List`1 generatedValues) +8084396 System.Data.Mapping.Update.Internal.UpdateTranslator.Update(IEntityStateManager stateManager, IEntityAdapter adapter) +267 [UpdateException: An error occurred while updating the entries. See the inner exception for details.] System.Data.Mapping.Update.Internal.UpdateTranslator.Update(IEntityStateManager stateManager, IEntityAdapter adapter) +389 System.Data.EntityClient.EntityAdapter.Update(IEntityStateManager entityCache) +163 System.Data.Objects.ObjectContext.SaveChanges(SaveOptions options) +609 IADAL.IAController.Save(IAHeader head) in C:\Projects\IA\IADAL\IAController.cs:61 IA.IAForm.saveForm(Boolean validate) in C:\Projects\IA\IA\IAForm.aspx.cs:198 IA.IAForm.advance_Click(Object sender, EventArgs e) in C:\Projects\IA\IA\IAForm.aspx.cs:287 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +118 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +112 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5019

  Read the article

• Removing expired certificates from LDS (new ver of ADAM)

  - by jonthebrewer

  Hi all. This is my situation: We are in the process of replacing a certificate store currently hosted on Sun's iPlanet with Microsoft's Lightweight Directory Services (new version of ADAM with Server 2008). These certificates have been imported into LDS into an application partition (say o=myorg, C=AU). Under this structure I have around 40,000 OU's each one representing a customer under each customers OU are one or more user (iNetOrg) objects (around 60,000 in all). In each user are one or more certificates in the UserCertificate attribute. A combination of in-house written application code and proprietory PKI code reads and publishes these certficates to validate financial transactions. As the LDAP path of the certificates is stored within the customer certificates (and within the application code) and there is zero appetite for changing any of the code, I have had to pick up the iPlanet directory as a whole and dump it in LDS in the same structure. (I will not be using or hosting a Microsoft CA, just implementing an LDAP compliant directory to host these certificates) We have fully tested the application using the data in LDS and everything works fine - here is my dilema and question (finally, phew!) There was no process put in place for removing revoked or expired certificates, consequently the vast majority of the data is completely useless, the system has been running for about 8 years! I have done a quick analysis and I estimate that at least 80% of the data is no longer valid. As I am taking on responsibility for managing the directory I would like to start with a clean directory. Does anyone have any idea how I can cleanup these expired certificates. I am not a highly experienced scripter but have some background in VB. I have been researching the use of CAPICOM and have a feeling this may be able to be used but in exactly what way I am not sure?? I would prefer to write a script that I could specify an expiration date (say any certs that expired prior to 2010) then run against the LDS paritition. This way I can reuse the script periodically to cleanup the directory (as mentioned above - I have no way to adjust the applications that are writing the certs, this is with a third party). Another, less attractive, alternative is to massage the LDIF file (2.7 million lines!) to rip the certs out prior to the import Any help and advice MUCH appreciated. Cheers Jon

  Read the article

• Qt vs .NET - plz no n00bs who don't know wtf they're talking about [closed]

  - by Pirate for Profit

  Man in all these Qt vs. .NET discussions 90% these people don't know WTF they're talking about. Trying to get a real comparison chart going before we embark on a major fucking project. And yes I'm drunk, and yes I use cocaine. Event Handling In Qt the event handling system you just emit signals when something cool happens and then catch them in slots, for instance emit valueChanged(int percent, bool something); and void MyCatcherObj::valueChanged(int p, bool ok){} blocking them and disconnecting them when needed, doing it across threads... once you get the hang of it, it just seems a lot more natural and intuitive than the way the .NET event handling is set up (you know, object sender, CustomEventArgs e). And I'm not just talking about syntax, because in the end the .NET delegate crap is the bomb. I'm also talking about in more than just reflection (because, yes, .NET obviously has much stronger reflection capabilities). I'm talking about in the way the system feels to a human being. Qt wins hands down i m o. Basically, the footprints make more sense and you can visualize the project easier without the clunky event handling system. I wish I could it explain it better. The only thing is, I do love some of the ease of C# compared to C++ and .NET's assembly architecture. That is a big bonus for modular projects, which are a PITA to do in C++. Database Ease of Doing Crap Also what about datasets and database manipulations. I think .net wins here but I'm not sure. Threading/Conccurency How do you guys think of the threading? In .NET, all I've ever done is make like a list of master worker threads with locks. I like QConcurrentFramework, you don't worry about locks or anything, and with the ease of the signal slot system across threads it's nice to get notified about the progress of things. Memory Usage Also what do you think of the overall memory usage comparison. Is the .NET garbage collector pretty on the ball and quick compared to the instantaneous nature of native memory management? Or does it just let programs leak up a storm and lag the computer then clean it up when it's about to really lag? However, I am a n00b who doesn't know what I'm talking about, please school me on the subject.

  Read the article

• JLabel animation in JPanel

  - by Trizicus

  After scratching around I found that it's best to implement a custom image component by extending a JLabel. So far that has worked great as I can add multiple "images" (jlabels without the layout breaking. I just have a question that I hope someone can answer for me. I noticed that in order to animate JLabels across the screen I need to setlayout(null); and setbounds of the component and then to animate eventually setlocation(x,y);. Is this a best practice or a terrible way to animate a component? I plan on eventually making an animation class but I don't want to do so and end up having to chuck it. I have included relevant code for a quick review check. import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import javax.swing.JPanel; import javax.swing.Timer; public class GraphicsPanel extends JPanel { private Timer timer; private long startTime = 0; private int numFrames = 0; private float fps = 0.0f; private int x = 0; GraphicsPanel() { final Entity ent1 = new Entity(); ent1.setBounds(x, 0, ent1.getWidth(), ent1.getHeight()); add(ent1); //ESSENTIAL setLayout(null); //GAMELOOP timer = new Timer(30, new ActionListener() { public void actionPerformed(ActionEvent e) { getFPS(); incX(); ent1.setLocation(x, 0); repaint(); } }); timer.start(); } public void incX() { x++; } @Override public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D) g.create(); g2.setClip(0, 0, getWidth(), getHeight()); g2.setColor(Color.BLACK); g2.drawString("FPS: " + fps, 1, 15); } public void getFPS() { ++numFrames; if (startTime == 0) { startTime = System.currentTimeMillis(); } else { long currentTime = System.currentTimeMillis(); long delta = (currentTime - startTime); if (delta > 1000) { fps = (numFrames * 1000) / delta; numFrames = 0; startTime = currentTime; } } } } Thank you!

  Read the article

• General advice and guidelines on how to properly override object.GetHashCode()

  - by Svish

  According to MSDN, a hash function must have the following properties: If two objects compare as equal, the GetHashCode method for each object must return the same value. However, if two objects do not compare as equal, the GetHashCode methods for the two object do not have to return different values. The GetHashCode method for an object must consistently return the same hash code as long as there is no modification to the object state that determines the return value of the object's Equals method. Note that this is true only for the current execution of an application, and that a different hash code can be returned if the application is run again. For the best performance, a hash function must generate a random distribution for all input. I keep finding myself in the following scenario: I have created a class, implemented IEquatable<T> and overridden object.Equals(object). MSDN states that: Types that override Equals must also override GetHashCode ; otherwise, Hashtable might not work correctly. And then it usually stops up a bit for me. Because, how do you properly override object.GetHashCode()? Never really know where to start, and it seems to be a lot of pitfalls. Here at StackOverflow, there are quite a few questions related to GetHashCode overriding, but most of them seems to be on quite particular cases and specific issues. So, therefore I would like to get a good compilation here. An overview with general advice and guidelines. What to do, what not to do, common pitfalls, where to start, etc. I would like it to be especially directed at C#, but I would think it will work kind of the same way for other .NET languages as well(?). I think maybe the best way is to create one answer per topic with a quick and short answer first (close to one-liner if at all possible), then maybe some more information and end with related questions, discussions, blog posts, etc., if there are any. I can then create one post as the accepted answer (to get it on top) with just a "table of contents". Try to keep it short and concise. And don't just link to other questions and blog posts. Try to take the essence of them and then rather link to source (especially since the source could disappear. Also, please try to edit and improve answers instead of created lots of very similar ones. I am not a very good technical writer, but I will at least try to format answers so they look alike, create the table of contents, etc. I will also try to search up some of the related questions here at SO that answers parts of these and maybe pull out the essence of the ones I can manage. But since I am not very stable on this topic, I will try to stay away for the most part :p

  Read the article

• OCR an RSA key fob (security token)

  - by user130582

  I put together a quick WinForm/embedded IE browser control which logs into our company's bank website each morning and scrapes/exports the desired deposit information (the bank is a smallish regional bank). Since we have a few dozen "pseudoaccounts" that draw from the same master account, this actually takes 10-15 minutes to retrieve. Anyway, the only problem is that our business bank account reuires an RSA security token (http://www.rsa.com/node.aspx?id=1156)--if you are not familiar, it is a small device which shows a random 6 digit number every 15(?) seconds, so I have to prompt for this value before starting. This is on top of the website's login based security model, so even if you create a read-only account that can't do anything, you still have to put the RSA number in. We have 5 of these tokens for different people in the company. From our perspective this is nusiance security. I was joking about using a web camera to OCR the digits from the key fob so they didn't have to type it in -- mainly so that the scraping/export would be done before anyone arrives in the morning. Well, they asked if I could really do it. So now I ask you, how hard (how many hours) do you think it would take to OCR these digits reliably from a JPEG image produced by the camera? I already know I can get the JPEG easily. I think you get 3 tries to log in, so it really needs to hit a 99% accuracy rate. I could work on this on my off time, but they don't want me to put more than a few hours into it, so I want to leverage as much existing code as possible. This is a 7-segment display (like an alarm clock) so it's not exactly text that an OCR package would be used to seeing. Also--there is a countdown timer on the side of the display; typically when it is down to 1 bar, you wait until the next number appears and it starts over at 5 bars (like signal strength on your cell phone). So this would need to be OCRd as well but it is not text. Anyway the more I think about it as I type this, the less convinced I am that I can truly get this right, so maybe I should just work on it in my spare time?

  Read the article

• How to stop UITableView moveRowAtIndexPath from leaving blank rows upon reordering

  - by coneybeare

  I am having an issue where in reordering my UITableViewCells, the tableView is not scrolling with the cell. Only a blank row appears and any subsequent scrolling gets an Array out of bounds error without any of my code in the Stack Trace. Here is a quick video of the problem. Here is the relevant code: - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { return indexPath.section == 1; } - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { BOOL ret = indexPath.section == 1 && indexPath.row < self.count; DebugLog(@"canMoveRowAtIndexPath: %d:%d %@", indexPath.section, indexPath.row, (ret ? @"YES" : @"NO")); return ret; } - (void)delayedUpdateCellBackgroundPositionsForTableView:(UITableView *)tableView { [self performSelectorOnMainThread:@selector(updateCellBackgroundPositionsForTableView:) withObject:tableView waitUntilDone:NO]; } - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { if (fromIndexPath.row == toIndexPath.row) return; DebugLog(@"Moved audio from %d:%d to %d:%d", fromIndexPath.section, fromIndexPath.row, toIndexPath.section, toIndexPath.row); NSMutableArray *audio = [self.items objectAtIndex:fromIndexPath.section]; [audio exchangeObjectAtIndex:fromIndexPath.row withObjectAtIndex:toIndexPath.row]; [self performSelector:@selector(delayedUpdateCellBackgroundPositionsForTableView:) withObject:tableView afterDelay:kDefaultAnimationDuration/3]; } And here is the generated Stack Trace of the crash: Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: iPhone Simulator 3.2 (193.3), iPhone OS 3.0 (7A341) *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray removeObjectsInRange:]: index (6) beyond bounds (6)' Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 CoreFoundation 0x302ac924 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 4 1 libobjc.A.dylib 0x93cb2509 objc_exception_throw + 56 2 CoreFoundation 0x3028e5fb +[NSException raise:format:arguments:] + 155 3 CoreFoundation 0x3028e55a +[NSException raise:format:] + 58 4 Foundation 0x305684e9 _NSArrayRaiseBoundException + 121 5 Foundation 0x30553a6e -[NSCFArray removeObjectsInRange:] + 142 6 UIKit 0x30950105 -[UITableView(_UITableViewPrivate) _updateVisibleCellsNow] + 862 7 UIKit 0x30947715 -[UITableView layoutSubviews] + 250 8 QuartzCore 0x0090bd94 -[CALayer layoutSublayers] + 78 9 QuartzCore 0x0090bb55 CALayerLayoutIfNeeded + 229 10 QuartzCore 0x0090b3ae CA::Context::commit_transaction(CA::Transaction*) + 302 11 QuartzCore 0x0090b022 CA::Transaction::commit() + 292 12 QuartzCore 0x009132e0 CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) + 84 13 CoreFoundation 0x30245c32 __CFRunLoopDoObservers + 594 14 CoreFoundation 0x3024503f CFRunLoopRunSpecific + 2575 15 CoreFoundation 0x30244628 CFRunLoopRunInMode + 88 16 GraphicsServices 0x32044c31 GSEventRunModal + 217 17 GraphicsServices 0x32044cf6 GSEventRun + 115 18 UIKit 0x309021ee UIApplicationMain + 1157 19 XXXXXXXX 0x0000278a main + 104 (main.m:12) 20 XXXXXXXX 0x000026f6 start + 54 NOte that the array out of bounds length is not the length of my elements (I have 9), but always something smaller. I have been trying to solve this for many hours days without avail… any ideas? UPDATE: More code as requested In my delegate: - (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath { return UITableViewCellEditingStyleNone; } - (NSIndexPath *)tableView:(UITableView *)tableView targetIndexPathForMoveFromRowAtIndexPath:(NSIndexPath *)sourceIndexPath toProposedIndexPath:(NSIndexPath *)proposedDestinationIndexPath { int count = [(UAPlaylistEditDataSource *)self.dataSource count]; if (proposedDestinationIndexPath.section == 0) { return [NSIndexPath indexPathForRow:0 inSection:sourceIndexPath.section]; }else if (proposedDestinationIndexPath.row >= count) { return [NSIndexPath indexPathForRow:count-1 inSection:sourceIndexPath.section]; } return proposedDestinationIndexPath; } …thats about it. I am using the three20 framework and I have not had any issues with reordering till now. The problem is also not in the updateCellBackgroundPositionsForTableView: method as it still crashes when this is commented out.

  Read the article

• PHP5.3 is not working with MySQL5.1 IIS7 Times out

  - by Thorn007

  I have set up PHP5.3, MySQL5.1, and IIS7 on Window 7 but php doesn't want to work with MySQL. I'm assuming it is a configuration error or an incomplete install on my part. MySQL5.1 is working PHP5.3 is working, phpinfo() shows info and that i have enabled MySQL IIS is setup and using fastCgiModule to run PHP IIS registers php.ini updates port 3306 is firewall free and open to the world php.ini is configured correctly I have added c:\php to the Windows systems PATH In the past I remember moving a file, libmysql.dll, to System32 but I doesn't look like that come with php5.3.1, as the driver comes built in now http://us3.php.net/manual/en/mysqlnd.install.php. (This has been giving me so much trouble I have been documenting my findings on my blog as http://inteldesigner.com/2010/code/having-problems-getting-php5-3-to-work-with-mysql5-1 ) NEED: I need to install PHP manually, don't want to use the quick installer or an older version I need to get PHP5.3 to work with MySQL5.1 so i can install Wordpress2.9 and Drupal7a Any links or suggestion would be great, I have already done everything on the iis web site, nothing is working. I'm guessing they have not updated for new software. BUGS/SOLUTION: The solution is here: http://bugs.php.net/bug.php?id=50172 thanks go to don.raman on the iis.net forums http://forums.iis.net/p/1164911/1933894.aspx SYMPTOMS: The php function mysql_connect() in conjunction with php5.3 locks up sever and returns error 500. (IPv6 is the problem see above link) TEST CODE: <?php $con = mysql_connect("localhost","root","***"); if (!$con) { die('Could not connect: ' . mysql_error()); } // some code mysql_close($con); ?> ERRORS: From Browser: HTTP Error 500.0 - Internal Server Error C:\php\php-cgi.exe - The FastCGI process exceeded configured activity timeout When i run php -f c:\public_html\index.php from the command line i got: PHP Warning: mysql_connect(): [2002] A connection attempt failed because the co nnected party did not (trying to connect via tcp://localhost:3306) in C:\public _html\index.php on line 10 Warning: mysql_connect(): [2002] A connection attempt failed because the connect ed party did not (trying to connect via tcp://localhost:3306) in C:\public_html \index.php on line 10 PHP Warning: mysql_connect(): A connection attempt failed because the connected party did not properly respond after a period of time, or established connectio n failed because connected host has failed to respond. in C:\public_html\index.php on line 10 Warning: mysql_connect(): A connection attempt failed because the connected part y did not properly respond after a period of time, or established connection fai led because connected host has failed to respond. in C:\public_html\index.php on line 10 Could not connect: A connection attempt failed because the connected party did n ot properly respond after a period of time, or established connection failed bec ause connected host has failed to respond. C:\Users\Kevin>

  Read the article

• SVN naming convention: repository, branches, tags

  - by LookitsPuck

  Hey all! Just curious what your naming conventions are for the following: Repository name Branches Tags Right now, we're employing the following standards with SVN, but would like to improve on it: Each project has its own repository Each repository has a set of directories: tags, branches, trunk Tags are immutable copies of the the tree (release, beta, rc, etc.) Branches are typically feature branches Trunk is ongoing development (quick additions, bug fixes, etc.) Now, with that said, I'm curious how everyone is not only handling the naming of their repositories, but also their tags and branches. For example, do you employ a camel case structure for the project name? So, if your project is something like Backyard Baseball for Youngins, how do you handle that? backyardBaseballForYoungins backyard_baseball_for_youngins BackyardBaseballForYoungins backyardbaseballforyoungins That seems rather trivial, but it's a question. If you're going with the feature branch paradigm, how do you name your feature branches? After the feature itself in plain English? Some sort of versioning scheme? I.e. say you want to add functionality to the Backyard Baseball app that allows users to add their own statistics. What would you call your branch? {repoName}/branches/user-add-statistics {repoName}/branches/userAddStatistics {repoName}/branches/user_add_statistics etc. Or: {repoName}/branches/1.1.0.1 If you go the version route, how do you correlate the version numbers? It seems that feature branches wouldn't benefit much from a versioning schema, being that 1 developer could be working on the "user add statistics" functionality, and another developer could be working on the "admin add statistics" functionality. How are these do branch versions named? Are they better off being: {repoName}/branches/1.1.0.1 - user add statistics {repoName}/branches/1.1.0.2 - admin add statistics And once they're merged into the trunk, the trunk might increment appropriately? Tags seem like they'd benefit the most from version numbers. With that being said, how are you correlating the versions for your project (whether it be trunk, branch, tag, etc.) with SVN? I.e. how do you, as the developer, know that 1.1.1 has admin add statistics, and user add statistics functionality? How are these descriptive and linked? It'd make sense for tags to have release notes in each tag since they're immutable. But, yeah, what are your SVN policies going forward?

  Read the article

• How to construct a flowchart/storyboard in a Func Spec

  - by PeterQ

  Hey I'm a bit embarrassed to write a post on this topic, but I would appreciate the help. At my school, the CS kids (myself included) have created a nice, little program that is built for incoming Chem/Bio students. It consists of several modules that reviews topics they should have a firm grasp on before they start their classes. It's a nice tool since it cuts down on reviewing the material in class but also allows the students to do a quick diagnostic to fix any problems. Now, I'm in charge of constructing a simple interface that reports on the progress of the group and individual students. The interface is pretty simple. It's just a window that pops up, and it has three tabs: the first tab is a "cumulative" report of all of students. The secnod tab has a drop down box that lists the students and once a student is selected, a report for him/her comes up. And the third tab is simply a description of all of the terms used in the 1st and 2nd tabs. Now, I'm trying to be a good CS student and write a func. spec for my interface. My problem comes with the fact that I'd like to insert a little flowchart using Visio. Problem is, and I'm quite embarrassed to admit this, I don't know how to construct the flowchart/storyboard. For instance, I know I start with a "Start/Click Icon" in a rectangle. Then where do I go? Do I draw three arrrows (one going to each tab) and then describing what goes on? In tab one, the only thing that happens is that the user will select a "sort" method in the drop down box. This will sort the list. The End. Similarly, if the user selects the second tab, then he will go to a drop down box with the student names. Selecting a name will bring up student info. And the third tab is just a list of unfamiliar terms coming from the first or second tab. I wanted to storyboard/flowchart what I'm doing, but I'm unclear how to go about it. Any help would be appreciated! (Just to clarify, I'm not having trouble with using Visio, but I don't know how one goes about construct a storyboard or determining the procedure for constructing one)

  Read the article

• log4net: what am I doing wrong?

  - by Berryl

  Being a log4net newb / boob I just copied lines from an NHibernate example project where I can see the log.txt file is updated. Is there a quick answer why mine isn't creating the file? Cheers, Berryl [assembly: log4net.Config.XmlConfigurator(Watch = true)] I saw another post here saying this should go in AssemblyInfo, but in the example project this is just another line in a static helper class. Not wanting to 'mess with' assemblyInfo I also put this in a static helper, along with the following to actually log in the same static helper class: private static readonly log4net.ILog _log = log4net.LogManager.GetLogger( System.Reflection.MethodBase.GetCurrentMethod().DeclaringType ); And in app.config, I have <configSections> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" /> </configSections> <!-- This section contains the log4net configuration settings --> <log4net> <!-- Define an output appender (where the logs can go) --> <appender name="LogFileAppender" type="log4net.Appender.FileAppender, log4net"> <param name="File" value="log.txt" /> <param name="AppendToFile" value="false" /> <layout type="log4net.Layout.PatternLayout, log4net"> <param name="ConversionPattern" value="%d [%t] %-5p %c [%x] &lt;%X{auth}&gt; - %m%n" /> </layout> </appender> <appender name="LogDebugAppender" type="log4net.Appender.DebugAppender, log4net"> <layout type="log4net.Layout.PatternLayout, log4net"> <param name="ConversionPattern" value="%d [%t] %-5p %c [%x] &lt;%X{auth}&gt; - %m%n"/> </layout> </appender> <!-- Setup the root category, set the default priority level and add the appender(s) (where the logs will go) --> <root> <priority value="ALL" /> <appender-ref ref="LogFileAppender" /> <appender-ref ref="LogDebugAppender"/> </root> <!-- Specify the level for some specific namespaces --> <!-- Level can be : ALL, DEBUG, INFO, WARN, ERROR, FATAL, OFF --> <logger name="NHibernate"> <level value="ALL" /> </logger> </log4net>

  Read the article

• Streaming Video with Blackberry Simulator

  - by Jenny

  So, I wrote a quick little app for the iphone that takes in an http URL, and plays the .mp4 video located at that URL (it does more than that, of course, but that's the meat of it). Naturally, I wanted to have it on more than just a single mobile platform, so I decided to target Blackberry next. However, I'm running into a lot of problems with the Blackberry Environment. First of all, I learn that I can only download 256k files! I learn how to set that variable in my MDS simulator (and learn that this is NOT a production solution, because any end users will have to have their BES or MDS admin change the setting there). Then, I find a video less than 2 MB I can practice with. Going to the browser prompts me to save the video (rather than it playing in the browser like I expected). After saving the video, it refuses to play, saying it's the wrong format. So. I can't find a reference to IF Blackberry can stream with HTTP (i"ve heard it CAN use RTSP, though, and heard some rumors that it can't use HTTP, which would really suck). I also can't find a reference to what format blackberry uses (although I can find a million programs that will convert one file to the 'blackberry' format). Surely SOMEONE must have tried to stream video with the blackberry before. How did they go about doing so? Is it just a hopeless pipedream? Will I have to go with RTSP? Sorry for the lack of a concrete question...I'm just really lost, and I hate how so many tutorials or forum posts seem to assume I know the capabilities of the Blackberry... Edit: I finally found out that the .3gp (which I'd never heard of ) format is what Blackberry uses. Still have no idea how to stream videos off the web, though. I found a tutorial: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/1089414/How%5FTo%5F-%5FPlay%5Fvideo%5Fwithin%5Fa%5FBlackBerry%5Fsmartphone%5Fapplication.html?nodeid=1383173&vernum=0 That seemed to be useful, but the code doesn't work if you give it a URL (even though it claims it does).

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >