Search Results

Search found 7606 results on 305 pages for 'raam dev'.

Page 216/305 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• BCM2046B1 Bluetooth Dongle connection problem

  - by Andfoy

  Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• virtual box upgrade

  - by Husni

  I did upgrade virtualbox from 4.1 to 4.2 wheneverver I want to load my win xp vdi, it gives me the following error: "Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup' as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary." I ran the suggested step to reinstall the kernel module, and the log file files is as follow: Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. I still unable to re-run my win virtual XP vdi file. anyone have a clue?

  Read the article

• Dual boot on Hp Envy Ultrabook

  - by phodu_insaan

  I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Releasing software/Using Continuous Integration - What do most companies seem to use?

  - by Sagar

  I've set up our continuous integration system, and it has been working for about a year now. We have finally reached a point where we want to do releases using the same. Before our CI system, the process(es) that was used was: (Develop) -> Ready for release -> Create a branch -> (Build -> Fix bugs as QA finds them) Loop -> Final build -> Tag (Develop) -> Ready for release -> (build -> fix bugs) Loop -> Tag Our CI setup: 1 server for development (DEV) 1 server for qa/release (QA) The second one has integrated into CI perfectly. I create a branch when the software is ready for release, and the branch never changes thereafter, which means the build is reproduceable without having to change the CI job. Any future development takes place on HEAD, and even maintainence releases get a completely new branch and a completely new job, which remains on the CI system forever, and then some. The first method is harder to adapt. If the branch changes, the build is not reproduceable unless I use the tag to build [jobs on the CI server uses the branch for QA/RELEASE, and HEAD for development builds]. However, if I use the tag to build, I have to create a new CI job to build from the tag (lose changelog on server), or change the existing job (lose original job configuration). I know this sounds complicated, and if required, I will rewrite/edit to explain the situation better. However, my question: [If at all] what process does your company use to release software using continuous integration systems. Is it even done using the CI system, or manually?

  Read the article

• How to fix the “Live INT automatically logs out”

  - by ybbest

  Problem: Live INT environment automatically logs out I am trying to setup the Authentication with Windows Live ID and followed this blog post ; I have a problem logging in to live INT web site. Whenever I try to log in (https://login.live-int.com/login.srf  this is the internal Live environment to be used in a dev. environment.), after entering valid email/password I get redirected to the logout page. I tried 2 different accounts (one with existing email address, and other one with newly created @hotmail-int.com address) and 3 different browsers so I’m sure that neither account nor the browser are the cause of this. I also tried to enter wrong password, and in that case I get the message that the password is wrong. Solution: All you need is the unique ID in order to add the user to SharePoint , you can get the ID without logging into the Live INT environment. I think the Live internal environment is not working correctly for some reasons , the reason I need to login to the Live internal environment is that I need to get the unique ID for the test account so that I can add the user to SharePoint. All the blogs I have come across require you to login in order to get the unique ID. However, I figured out another way of getting the unique ID without logging in. Steps are below: Register a new test account in the Live internal environment. Go to the SharePoint site collection that has  Live ID authentication enabled and select the LiveID INT(it will be different as you could name it differently when you set up the authentication provider) from the dropdown. Try login using the Internal Live account, you will get an Access Denied Error as below showing your  unique ID for the test account. Add that account to your SharePoint Group, boom, it works. I hope it will help anyone who needs to do this stuff in the future.

  Read the article

• Where to look for challenging jobs with a relaxed atmosphere?

  - by RBTree

  I'm a dev at one of the big-name tech companies. I like the job for many reasons: I do interesting work on a cool product I solve challenging problems and use a lot of high-level skills (quantitative, creative, writing, presenting) It pays well The problem is that I feel I need a more relaxed atmosphere (shorter hours, less performance pressure, and more flexibility), in order to free up time for other pursuits and reduce stress. The ideal would be a job that's around 30-35 hours a week, where there is flexibility to work more or less in a given week. Can anyone suggest where to look for a job like this, where I wouldn't have to sacrifice too much on the above points? (Obviously I would have to sacrifice pay.) My employer does not generally offer part-time employment. The closest thing I can think of is when I did summer internships at my university's CS department. The work was very intellectually challenging, but if I needed to go home a couple hours early or get flexibility on a due date, nobody batted an eyelash. However, I'd like to find out if there are alternatives to academia since from what I've seen the pay there is a gigantic drop from what I'm currently making. I've done freelance development before, but I do like that as an employee of a large company I have a lot of things taken care of for me (e.g. benefits and guaranteed stable employment).

  Read the article

• Two graphical entities, smooth blending between them (e.g. asphalt and grass)

  - by Gabriel Conrad

  Supposedly in a scenario there are, among other things, a tarmac strip and a meadow. The tarmac has an asphalt texture and its model is a triangle strip long that might bifurcate at some point into other tinier strips, and suppose that the meadow is covered with grass. What can be done to make the two graphical entities seem less cut out from a photo and just pasted one on top of the other at the edges? To better understand the problem, picture a strip of asphalt and a plane covered with grass. The grass texture should also "enter" the tarmac strip a little bit at the edges (i.e. feathering effect). My ideas involve two approaches: put two textures on the tarmac entity, but that involves a serious restriction in how the strip is modeled and its texture coordinates are mapped or try and apply a post-processing filter that mimics a bloom effect where "grass" is used instead of light. This could be a terrible failure to achieve correct results. So, is there a better or at least a more obvious way that's widely used in the game dev industry?

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Ethernet Connection Unavailable

  - by fabikw

  I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

  Read the article

• Problems syncing photos and strange effects of uploaded files from other devices

  - by Daniel

  I have a Galaxy Spica (GT-i5700) Android v2.1, rooted with Leshak dev 7 #123. But never mind the root info, the problem would be the same unrooted. The photos from this phone is stored in "sdcard/images", nevertheless the phone also creates a "sdcard/DCIM" but only stores some thumbnails there. Problem nr 1: U1 only reads the DCIM-folder for automatic photo-upload. So photos stored in this phone is not uploaded. If I move photos to "DCIM" folder, U1 recognises the photos and start uploading them. Possible solution: Could there be an option in the settings, to set preferred photo folder? Problem nr 2: Out of 74 pictures, 12 did not get uploaded. Pressing "Retry failed transfers" in Settings does nothing. Pressing the files where status is "Upload failed, tap to retry" only changes the status to "Uploading..." but nothing gets uploaded. If I upload another file to U1, it is uploaded directly without any problem. It has nothing to do with file size, 1,1 MB files has been uploaded fine whilst some failed are 0,8 MB. Problem nr 3: The photos from DCIM are in my case uploaded to a folder called "Pictures - GT-I5700" in U1. If I log in to the homepage and from there upload another photo in "Pictures - GT-I5700", it shows up in U1 on my phone fine. But when I tap it, U1 downloads the photo to "sdcard/U1/Pictures - GT-I5700". If it sync photos from "sdcard/DCIM" to a specific folder, why not also download files to the same folder from which it is synced? After a while of usage, syncing and uploading files from different clients it would be a mishmash of folders and places files are stored and considering that I see no use of U1 at all. Another question: If my SD card in some way breaks down/some folders cannot be read/card temporarly changed and U1 is running, does U1 consider that as files deleted and also delete from the cloud?

  Read the article

• My 2012 Professional Development Goals

  - by kerry

  Once again I am going to declare some professional goals for my upcoming year. Convert my blog to Jekyll hosted on github – I am tired of wordpress, tired of spam, and would like to try something new.  I have already started on this.  Just need to finish it up. Launch my GWT / Google App Engine application – I am currently developing a GWT application to be deployed to Google App Engine. Do another presentation at the user group – At least a few lightning talks.  I have a few ideas. Attend a tech conference – Dev Nexus is the likely target Post more often – I did 10 posts last year, would like to maybe double that next year (including this one) Attend a user group meeting outside of Nashville JUG – A rollover from last year, I will probably be regularly attend the Interactive Developers meeting Study another language – I have been thinking about looking in to Dart or perhaps Go Launch an Android app – Another holdover from last year I am thinking of doing a small app having to do with managing the silent state of the phone

  Read the article

• Installation causing broken packages

  - by AWE

  Here I come I am so determined to use Ubuntu that I paid a professional to install it for me (dualboot). When I got it I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev but doesn't help, only makes life complicated. What the *#$%&!!! I don't want to be forced to become a computer scientist just to be able to use a free source os. P.s. the sound stopped working

  Read the article

• Ubuntu update deleted entries from grub

  - by Kevin

  My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

  - by Paul Swartout

  I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

  Read the article

• SQL Server 2008 R2 Launch Event - Montreal

  - by guybarrette

  If you’re into SQL Server, you may want to attend the free 2008 R2 launch event that will take place on May 26th, 2010 in Montreal. Agenda: 8:00 - 9:00am : Registration and Breakfast 9:00 – 9:15am:  Welcome and Introductions 9:15 – 10:00am:  Keynote Presentation 10:00 - 10:15am: Morning break 10:15 – 11:45am: SQL Server Presentation 11:45 – 12:45pm: Lunch 12:45 – 1:45pm: Track Session 1 1:45 – 2:45pm: Track Session 2 2:45 – 3:00pm: Afternoon break 3:00 - 4:00pm: Track Session 3 Track Descriptions DBA TRACK Session 1: Ensure Business Continuity with SQL Server 2008 R2,  Windows Server 2008 & Hyper-V Live Migration Session 2: Simplify management of your SQL Server data platform with Multi-server Management Session 3: Deliver unprecedented access to business-critical data at a lower TCO with SQL Server 2008 R2 Parallel Data Warehouse BI TRACK Session1: Enable Managed Self-service BI with Power Pivot for Excel and SharePoint 2010 Session 2: Achieve Rapid Reporting with Reporting Services and Report Builder 3.0 Session 3: Importance of Master Data Management Dev - Visual Studio TRACK Session 1: Developing SQL Applications with Visual Studio 2010 Session 2:Managing Change for SQL Server applications using Team Foundation Server  Session 3: Targeting SQL Azure using Visual Studio   Register here var addthis_pub="guybarrette";

  Read the article

• Joomla 1.6 site cannot add a new extension through admin interface

  - by Ghlouw

  I'm having a very frustrating problem with my Joomla 1.6 site. I cannot add any new extensions through the admin interface. I have tried to upload the extension, or to use the search folder option or even the direct link. Neither of these options work, and all that happens is that the page tries to load forever until it finally timesout with a blank white page (no further error messages). I have tried this with multiple browsers (Chrome,FF,IE) and I have tried it with different extensions (modules, components, templates - all the same result). So I don't think it has anything to do with what I am uploading, but more likely the problem is something with the post action. I have also seen the exact same error occur when I try to update menu items or even create new menu items. I am not getting this error with a duplicate of the site in the dev environment, but only get this on my shared web hosting live server. This is on a Windows IIS / PHP / mySQL environment. Any help would be much appreciated!

  Read the article

• The Mac Tax

  - by Robert May

  One of our users was having difficulties with their mac and using some web software.  I decided to go peruse the landscape and see how much of a premium people were paying for their macs.  I priced out a Dell and a Mac from their websites.  I tried to get them as close to the same configuration, from a hardware standpoint, as I could.  I found the following: Apple Macbook Pro   Dell XPS 17 There are several important differences in the hardware: The mac doesn’t have a blueray player, but the dell does. The mac has a slightly slower processor. The mac claims to have a better battery, but doesn’t list the specifics, so there’s no way to tell. The mac doesn’t list the video card stats, so there’s no way to tell how comparable they are, but they’re probably close. The mac doesn’t come with any additional software.  No iWorks, iPhoto, etc.  They were left to their default of None, so arguably, the Dell is more functional out of the box. Other than changing the hardware specs to be close, all other configuration options were left at their default. So riddle me this, Batman:  Why do people buy Macs?  I have several dev buddies that own them, but I can’t justify the cost.  First, most of them load bootcamp and/or parallels at extra cost to run windows 7 and windows apps.  The hardware isn’t as good.  The price is almost twice as expensive. How do you justify the premium price? Technorati Tags: General

  Read the article

• How to fix the boot set up?

  - by Chris

  I got two OSes in my PC, Ubuntu and Windows 7. Until yesterday Windows 7 was on top of my dual-boot menu list, but I wanted to change it, so I went inside Windows configurations and put Ubuntu first, but I also set the time to 0 because I thought I could access Windows through Grub. But what happens is that after I upgraded Ubuntu to 11.10, that screen with boot options don't show Windows 7 anymore. I went online searching for a solution to my problem, most of them told me to configure some Grub options and others to use programs to do it. I've done them all and still can't access Windows 7. Just in case my problem is not clear yet, this is how was my boot order before I messed it all up: Windows 7 Ubuntu with a time of 10 secs to choose between both. This is how I wanted it to be: Ubuntu Windows 7 with 0 time to choose, but, inside Ubuntu I could access Windows through that Grub screen. But this is what happens: Ubuntu Windows 7 0 time, so it don't let me choose anything and jumps inside Ubuntu then inside Ubuntu grub doesn't show up anymore (black screen) and it starts Ubuntu normally. I tried to fix this many times from different ways inside Ubuntu but nothing worked, also when I try do something and then upgrade my grub with sudo upgrade-grub it shows this message: Generating grub.cfg ... Found Windows 7 (loader) on /dev/sda1 Skipping Windows 7 (loader) on Wubi system Found linux image: /boot/vmlinuz-3.0.0-12-generic Found initrd image: /boot/initrd.img-3.0.0-12-generic Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic done Thats why in the title I said it could probably be my WUBI messing all up. Anyone heave a solution for this? Do you need more information? I have a netbook so I cannot use the Windows Repair CD.

  Read the article

• Wubi installation broken by update - now unable to mount

  - by Outspaced

  As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

  Read the article

• XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

  - by D. Dubya

  I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

  Read the article

• Git repo: Unravelling my mess into tidy branches

  - by Martin

  I wanted to play with a project, so git cloned it and, following its instructions, created a local branch for my configuration (I guess so that users can merge updates back). At first I was just tweaking to suit my preferences, so I didn't bother with any further branching, but now I have some code that might be useful to someone else, but with my passwords, etc in the same branch. Effectively, I have one big branch from which I'd like to have: Postgres backend (default) but with some new code I've added MySQL backend (the biggest change I've made) with that same new code My settings: I can't git ignore the settings file because I occasionally have to add sections for new functionality, but I need to keep my personal settings out of the public branches! I guess this would work best as a local-only branch. Dev branches, which I would branch from the MySQL. Starting from scratch, I think I could figure out how to branch/merge the various updates, but is there an easy way to walk through the existing repo and choose which commits to apply to which branch? Or possibly create a branch from a point upstream then merge back, excluding certain commits?

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >