Search Results

Search found 12824 results on 513 pages for 'glen little'.

Page 217/513 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

• How much effort should you put into a junior developer?

  - by Crazy Eddie

  At what point should one give up? I've tried helping them out by having them shadow me. We agree to break a minute, and then they go missing in action for a while...then just go back to their desk. Even when I know they've done this, part of me feels like I shouldn't have to go get them but that they should be showing interest in learning. Frankly, it's a bunch of time I don't have explaining things as I go when I could just do it. Am I expecting too much to expect that if they want to learn they'll make sure I know they're ready and willing? They go to meetings that they where not told they had to, good, but then sit in the corner and sleep...bad. I don't even know what to do with that. Sometimes I give them something small to do and they do it great, so I give them something just a touch harder and they totally fail, hard. Check in things without testing them. Part of me thinks that maybe I should be spending more time with them but at the same time I don't see a lot of interest and I really, honestly don't have time teaching the same things over and over. Sometimes I get asked questions that are really, really easy to answer if you just do a little bit of your own work trying to find out. Other times I'm not asked anything. I'm sure I could be doing better but honestly...I don't really want to anymore.

  Read the article

• Which shopping cart / ecommerce platform to choose?

  - by fabien7474

  I need to build an ecommerce website within a tight budget and schedule. Of course, I have never done that before, so I have googled out what my solutions are and I have concluded that the following were not valid candidates anymore : Magento : Steep learning curve osCommerce : old, bad design, buggy and not user-friendly Zencart, CRE Loaded, CubeCart : based on osCommerce Virtuemart, uberCart, eCart : based on CMS (Joomal, Drupal, WordPress) that is not necessary for my use-case So I finally narrowed down my choices to these solutions : PrestaShop : easy-to-use, great templating engine (smarty) but many modules are not free buy yet indispensable OpenCart : security issues and not a great support from the main developer. See here and here. So, as you can see, I am a little bit confused and if you can help me choosing an easy-to-use, lightweight and cheap (not-necessarily free) ecommerce solution, I would really appreciate. By the way, I am a Java/Grails programmer but I am also familiar with PHP and .NET. (not with Python or Ruby/Rails) EDIT: It seems that this question is more appropriate for the Webmaster StackExchange site. So please move this question to where it belongs (I cannot do that) instead of downvoting it. BTW, I have found out a question quite similar on SO (http://stackoverflow.com/questions/3315638/php-ecommerce-system-which-one-is-easiest-to-modify) which is quite popular.

  Read the article

• How to show or direct a business analyst to a data modelling subject?

  - by AaronLS

  Our business analysts pushed hard to collect data through a spreadsheet. I am the programmer responsible for importing that data. Usually when they push hard for something like this, I never know how well it will work out until a few weeks later when I have time assigned to work on the task of programming the import of the data. I have tried to do as much as possible along the way, named ranges, data validations, etc. But I usually don't have time to take a detailed look at all the data and compare to the destination in the database to determine how well it matches up. A lot of times there will be maybe a little table of items that somehow I have to relate to something else in the database, but there are not natural or business keys present that would allow me to do so. Make the best of this, trying to write something that can compare strings and make a best guess at it and then go through the effort of creating interfaces for a user to match the imported data to the destination. I feel like if the business analyst was actually creating a data model, they would be forced to think about these relationships, and have an appreciation for the need of natural or business keys to be part of the spreadsheet for the purposes of smoothly importing the data. The closest they come to business analysis is a big flat list of fields, and that would be fine if it were like any other data dictionary and include data types+relationships, but it isn't. They are just a bunch of names. No indication of what type of data they might hold, and it is up to me to guess. When I have pushed for more detail, they say that it is just busy work. How can I explain the importance of data modelling? How can I tell them what it is and how to do it? It feels impossible, because they don't have an appreciation for its importance. They do however, usually have an interest in helping out in whatever way they can, it's just this in particular has never gotten a motivated response.

  Read the article

• Looking Under the Hood of ...

  - by rickramsey

  copyright 2012 Rob Lang Fair is fair. Our last post featured a conversation with the beautiful and talented Eva Mendez, so today we're featuring something for those of you who prefer the other gender of our fair species. This dude has quite the hardware challenge ahead of him. He hasn't begun to find out what's really under that hood. Life is much easier for you and me, thanks to Jeff Wright and Suzanne Zorn. They wrote a wicked cool article about Oracle VM Server for SPARC. Here's a little bit about it... Looking Under the Hood of Networking in Oracle VM Server for x86 Oracle VM Server for SPARC lets you create logical networks out of physical Ethernet ports, bonded ports, VLAN segments, virtual MAC addresses (VNICs), and network channels. You can then assign channels (or "roles") to each logical network so that it handles the type of traffic you want it to. Greg King explains how you go about doing this, and how Oracle VM Server for SPARC implements the network infrastructure you configured. He also describes how the VM interacts with paravirtualized guest operating systems, hardware virtualized operating systems, and VLANs. Finally, he provides an example that shows you how it all looks from the VM Manager view, the logical view, and the command line view of Oracle VM Server for x86. More Resources for Oracle VM Server for x86 If you liked Greg and Suzanne's paper, you can ... Download Oracle VM Server for x86 here Find technical resources for Oracle VM Server for x86 here Now, if we could just come up with a name for this awesome product that doesn't feel like I'm talking with a mouthful of marbles ... :-) - Rick Website Newsletter Facebook Twitter

  Read the article

• Questions about Code Reviews

  - by bamboocha

  My team plans to do Code Review and asked me to make a concept what and how we are going to make our Code Reviews. We are a little group of 6 team members. We use an SVN repository and write programs in different languages (mostly: VB.NET, Java, C#), but the reviews should be also possible for others, yet not defined. Basically I am asking you, how are you doing it, to be more precise I made a list of some questions I got: 1. Peer Meetings vs Ticket System? Would you tend to do meetings with all members, rather than something like a ticket system, where the developer can add a new code change and some or all need to check and approve it? 1. What tool? I made some researches on my own and it showed that Rietveld seems to be the program to use for non-git solutions. Do you agree/disagree and why? 2. A good workflow to follow? 3. Are there good ways to minimize the effort for those meetings even more? 4. What are good questions, every code reviewer should follow? I already made a list with some questions, what would you append/remove? are there any magic numbers in the code? do all variable and method names make sense and are easily understandable? are all querys using prepared statement? are all objects disposed/closed when they are not needed anymore? 5. What are your general experiences with it? What's important? Things to consider/prevent/watch out?

  Read the article

• Is the output of Eclipse's incremental java compiler used in production? Or is it simply to support Eclipse's features?

  - by Doug T.

  I'm new to Java and Eclipse. One of my most recent discoveries was how Eclipse comes shipped with its own java compiler (ejc) for doing incremental builds. Eclipse seems to by default output incrementally built class files to the projRoot/bin folder. I've noticed too that many projects come with ant files to build the project that uses the java compiler built into the system for doing the production builds. Coming from a Windows/Visual Studio world where Visual Studio is invoking the compiler for both production and debugging, I'm used to the IDE having a more intimate relationship with the command-line compiler. I'm used to the project being the make file. So my mental model is a little off. Is whats produced by Eclipse ever used in production? Or is it typically only used to support Eclipse's features (ie its intellisense/incremental building/etc)? Is it typical that for the final "release" build of a project, that ant, maven, or another tool is used to do the full build from the command line? Mostly I'm looking for the general convention in the Eclipse/Java community. I realize that there may be some outliers out there who DO use ecj in production, but is this generally frowned upon? Or is this normal/accepted practice?

  Read the article

• How to install Wacom Bamboo Pen

  - by casadrya

  I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit. After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. Nothing special happened. I opened Inkscape. The tablet didn't work. I opened Inkscape's Input devices dialog. I didn't understand anything. I tried to blindly click some options in that dialog but nothing seemed to have any effect. Same with Gimp. After googling some more I found the linuxwacom website with source code, this didn't seem to work. So... any help? As requested: lsusb Bus 005 Device 002: ID 056a:00d4 Wacom Co., Ltd dmesg | tail [ 492.961267] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 493.144862] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 [ 493.158854] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input7

  Read the article

• Recruiters intentionally present one good candidate for an available job

  - by Jeff O

  Maybe they do it without realizing. The recruiter's goal is to fill the job as soon as possible. I even think they feel it is in their best interest that the candidate be qualified, so I'm not trying to knock recruiters. Aren't they better off presenting 3 candidates, but one clearly stands out? The last thing they want from their client is a need to extend the interview process because they can't decide. If the client doesn't like any of them, you just bring on your next good candidate. This way they hedge their bet a little. Any experience, insight or ever heard of a head-hunter admit this? Does it make sense? There has to be a reason why the choose such unqualified people. I've seen jobs posted that clearly state they want someone with a CS degree and the recruiter doesn't take it literally. I don't have a CS degree or Java experience and still they think I'm a possible fit.

  Read the article

• NDC Oslo

  - by Alan Smith

  Originally posted on: http://geekswithblogs.net/asmith/archive/2013/06/14/153136.aspx2013 has been a hectic year for conference presentations so far, NDC in Oslo has been the 6th conference I have attended, and my session there was my 11th conference presentation this year. I have been meaning to make the short trip over from Stockholm to NDC for a few years, and this was the first time I made it. I have heard a lot of great things about the event, and was impressed with the location, the sessions, and most of all the atmosphere around the event boots and during the party on Thursday evening. The session I was delivering was my “Grid Computing with 256 Windows Azure Worker Roles & Kinect” demo, which I have delivered at many events over the past 12 months. The demo went fine. I’m always a little nervous when I try to scale out the application to 256 worker roles, it almost always works well and the application will scale in minutes, but very occasionally there can be a longer delay due to the provisioning process in the Windows Azure data centers. This would not be an issue for many scenarios, but when standing on stage in front of a room full of developers you really want things to run smoothly. A number of people have suggested that I should pre-provision an environment so that it is guaranteed to be there when I run the demo during a session. For me the aim has always been to show the rapid scalability on cloud-based platforms live on stage. Pre-provisioning an environment may make for a more reliable demo but to me that would be cheating, and not half as much fun!

  Read the article

• Socket.io v.9 with Actionscript

  - by funseiki

  I'm attempting to develop an online multiplayer game using Node.js for the server and Flash to display the client. I've been reading up a bit and have found quite a few recommendations for the socket.io library. I've also found a github project which exposes code to help facilitate communication between an Actionscript 3.0 client and a server using socket.io. The project I mentioned is a bit dated and doesn't seem to have support for the latest version of socket.io, so I was wondering if leveraging this framework (socket.io, that is) would be the most ideal way to go. I have found a simple project that uses the standard 'net' module for node.js, but because there a few options available, I'm a little lost as to which one to go with. I'm currently leaning towards just using the regular 'net' module as it is already familiar to me. Since much of the client is already coded up, I'd really like to not switch over to using the HTML5 canvas just yet (but using socket.io would make a transition in the future more friendly, I think?). Any advice/direction on this matter would be much appreciated, though I do realize that there may be no one right answer. Edit: To be more specific, are there any client-side socket.io frameworks available that allow for communication between an Actionscript 3.0 client and a socket.io server and are robust enough to support current/future versions of socket.io? If not, what are the alternatives?

  Read the article

• There is no two finger scroll option in my "Mouse and Touchpad" settings

  - by Ian

  I simply do not have the option for "two-finger scrolling" available in my "Mouse and Touchpad" settings. I have tried a lot of terminal commands that I have found in the forums with no success. Who has a solution that will enable two-finger scrolling? A little about me: Ubuntu 12.04.1 LTS \n \l Built-in Pointing Device Type: Mouse Interface: PS/2 Buttons: 2 ~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Synaptics TouchPad id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? WebCam SC-13HDL10931N id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=14 [slave keyboard (3)] Screenshot of system settings:

  Read the article

• What packages are neccessary to have sound output from java applets?

  - by MvG

  I've got a very minimalistic setup of ubuntu precise, created using debootstrap. So please don't assume that any packages are installed just because they usually are. On that system, I'd like to play some sounds from a java applet. However, this always fails with the following error message: javax.sound.midi.MidiUnavailableException: Can not open line at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1132) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1036) ... Caused by: java.lang.IllegalArgumentException: No line matching interface SourceDataLine supporting format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian is supported. at javax.sound.sampled.AudioSystem.getLine(AudioSystem.java:476) at javax.sound.sampled.AudioSystem.getSourceDataLine(AudioSystem.java:604) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1066) ... 35 more As the messages mention a soft synthesizer, and pcm lines, I expect that the lack of some midi daemon is not the issue here. As far as I can tell, the alsa kernel modules are loaded, including snd_hda_intel, snd_pcm, snd_seq_midi among others. I've also included the alsa-base and alsa-utils packages in my installation. alsa-mixer looks good, using “HDA Intel PCH” as its default device. What other packages, configuration settings or daemon startups does java require to make its sound output work?

  Read the article

• Better way to generate enemies of different sub-classes

  - by KDiTraglia

  So lets pretend I have an enemy class that has some generic implementation and inheriting from it I have all the specific enemies of my game. There are points in my code that I need to check whether an enemy is a specific type, but in Java I have found no easier way than this monstrosity... //Must be a better way to do this if ( enemy.class.isAssignableFrom(Ninja.class) ) { ... } My partner on the project saw these and changed them to use an enum system instead public class Ninja extends Enemy { //EnemyType is an enum containing all our enemy types public EnemyType = EnemyTypes.NINJA; } if (enemy.EnemyType = EnemyTypes.NINJA) { ... } I also have found no way to generate enemies on varying probabilities besides this for (EnemyTypes types : enemyTypes) { if ( (randomNext = (randomNext - types.getFrequency())) < 0 ) { enemy = createEnemy(types.getEnemyType()); break; } } private static Enemy createEnemy(EnemyType type) { switch (type) { case NINJA: return new Ninja(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); case GORILLA: return new Gorilla(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); case TREX: return new TRex(new Vector2D(rand.nextInt(getScreenWidth()), 0), determineSpeed()); //etc } return null } I know java is a little weak at dynamic object creation, but is there a better way to implement this in a way such like this for (EnemyTypes types : enemyTypes) { if ( (randomNext = (randomNext - types.getFrequency())) < 0 ) { //Change enemyTypes to hold the classes of the enemies I can spawn enemy = types.getEnemyType().class.newInstance() break; } } Is the above possible? How would I declare enemyTypes to hold the classes if so? Everything I have tried so far as generated compile errors and general frustration, but I figured I might ask here before I completely give up to the huge mass that is the createEveryEnemy() method. All the enemies do inherit from the Enemy class (which is what the enemy variable is declared as). Also is there a better way to check which type a particular enemy that is shorter than enemy.class.isAssignableFrom(Ninja.class)? I'd like to ditch the enums entirely if possible, since they seem repetitive when the class name itself holds that information.

  Read the article

• Painting with pixel shaders

  - by Gustavo Maciel

  I have an almost full understanding of how 2D Lighting works, saw this post and was tempted to try implementing this in HLSL. I planned to paint each of the layers with shaders, and then, combine them just drawing one on top of another, or just pass the 3 textures to the shader and getting a better way to combine them. Working almost as planned, but I got a little question in the matter. I'm drawing each layer this way: GraphicsDevice.SetRenderTarget(lighting); GraphicsDevice.Clear(Color.Transparent); //... Setup shader SpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.None, RasterizerState.CullNone, lightingShader); SpriteBatch.Draw(texture, fullscreen, Color.White); SpriteBatch.End(); GraphicsDevice.SetRenderTarget(darkMask); GraphicsDevice.Clear(Color.Transparent); //... Setup shader SpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.None, RasterizerState.CullNone, darkMaskShader); SpriteBatch.Draw(texture, fullscreen, Color.White); SpriteBatch.End(); Where lightingShader and darkMaskShader are shaders that, with parameters (view and proj matrices, light pos, color and range, etc) generate a texture meant to be that layer. It works fine, but I'm not sure if drawing a transparent quad on top of a transparent render target is the best way of doing it. Because I actually just need the position and params. Concluding: Can I paint a texture with shaders without having to clear it and then draw a transparent texture on top of it?

  Read the article

• ASP.NET Session Management

  - by geekrutherford

  Great article (a little old but still relevant) about the inner workings of session management in ASP.NET: Underpinnings of the Session State Management Implementation in ASP.NET.   Using StateServer and the BinaryFormatter serialization occuring caused me quite the headache over the last few days. Curiously, it appears the w3wp.exe process actually consumes more memory when utilizing StateServer and storing somewhat large and complex data types in session.   Users began experiencing Out Of Memory exceptions in the production environment. Looking at the stack trace it related to serialization using the BinaryFormatter. Using remote debugging against our QA server I noted that the code in the application functioned without issue. The exception occured outside the context of the application itself when the request had completed and the web server was trying to serialize session state into the StateServer.   The short term solution is switching back to the InProc method. Thus far this has proven to consume considerably less memory and has caused no issues. Long term the complex object stored in session will be off-loaded into a web service used to access the information directly from the database outside the context of the object used to encapsulate it.

  Read the article

• Design mode in Visual studio 2010 sp1 beta

  - by anirudha

  in MVC3 razor we found that their is no way to watch the design in Visual studio as well we can see aspx file by going to design mode. their is a little trick to solve this issue first is that if you have Expression web or Vs 2008 then open the file on them how see here in expression web 4 you need to add the extension .cshtml and open them as html as we open other. in Visual studio 2008 you need to add the extension .cshtml and set them open as html. well their is no big trouble if design not worked. but in some case when you need to get this issue solved this need to be work for configuration do this: Expression Web 4 > tools > application options > configure editor > click on new extension icon show in exact left put the cshtml in the window they show you and choose expression web [open as html] after that you can see the design in expression web. by default Expression web not have cshtml as known extension so you need to do that to add them because without it they never handle cshtml file and refer them to Visual studio. after setting this you  EW4 open the cshtml file as html and show you design in design mode. in Visual studio 2008 you can use same trick to solve this issue just follow this step > options > text editors > file extension put cshtml in textbox and set the option html editor from dropdown and click on add and ok this will open your cshtml file as html.

  Read the article

• Wessty: Live with HTML 5 (2011 Speaker Tour)

  - by David Wesst

  That’s right: Wessty is on tour. Okay, the banner and the tour is a little over the top, but I am really excited about my upcoming speaking engagements to spread the word about HTML 5! I have already kicked off the tour with the Winnipeg Code Camp last weekend with the world premiere of HTML 5 for .NET Pro presentation, and the turn out fantastic. It was the last presentation of the day, but we still had some great questions about the new standard and got to see how HTML 5 can fit into .NET web applications today. In any case, above you can see the confirmed presentations that I will be doing so far in 2011, but there are a few more events that I have heard about that I hope to add to that list. Ultimately, expect that list to be updated over the course of the year as the year is young and there are plenty of conferences coming up! Presentation Resources As the tour continues, I will be posting the slides and the source code for the demonstrations up here on my site. They will be free of charge and give you the chance to review the demos and hopefully take advantage of some of the cool things you see in the presentations. Become part of the Tour If you are considering hosting an event where you think that HTML 5 could use a voice, drop me a line and let me know. I am always looking for opportunities to grow the tour to talk not just about HTML 5, but a variety of topics that relate to user interface and user experience development. This post also appears at http://david.wes.st

  Read the article

• Who is code wanderer?

  - by DigiMortal

  In every area of life there are people with some bad habits or misbehaviors that affect the work process. Software development is also not free of this kind of people. Today I will introduce you code wanderer. Who is code wanderer? Code wandering is more like bad habit than serious diagnose. Code wanderers tend to review and “fix” source code in files written by others. When code wanderer has some free moments he starts to open the code files he or she has never seen before and starts making little fixes to these files. Why is code wanderer dangerous? These fixes seem correct and are usually first choice to do when considering nice code. But as changes are made by coder who has no idea about the code he or she “fixes” then “fixing” usually ends up with messing up working code written by others. Often these “fixes” are not found immediately because they doesn’t introduce errors detected by compilers. So these “fixes” find easily way to production environments because there is also very good chance that “fixed” code goes through all tests without any problems. How to stop code wanderer? The first thing is to talk with person and explain him or her why those changes are dangerous. It is also good to establish rules that state clearly why, when and how can somebody change the code written by other people. If this does not work it is possible to isolate this person so he or she can post his or her changes to code repository as patches and somebody reviews those changes before applying them.

  Read the article

• Reasonable technological solutions to create CRM using .NET eventually Java

  - by user1825608

  My background(If it's too long, just skip it please ; ) ): I am Java programmer(because of demand): mostly teacher for other students, worked on few thesis for others, but during my journey I discovered that .NET and Microsoft's tools are on at least two levels higher than Java and its tools so I want to learn more about them. I programmed little bit on Windows Phone(NFC Tags, TCP Clients, guitar tuner using internal microphone, simple RSS), used WPF, integrated WPF with Windows Forms, Apple Bonjour(.NET), I have expierience with IP cameras and with unusal problems, I learn Android, but I don't like it at all. Problem: I was asked by my friend to create CRM for small new company. There will maximum 20 workers in the company working at computers in few cities in the country(Poland). They just want to store contracts with the clients and client's data. I am not sure what exacly they do but probably sell apartments so there will be at most few thousands of contracts to store in far future. Now I am totally new to CRM but I want to learn. I have few questions: Should the data be stored on a server in the company's building running 24/7 or cloud. If cloud which one? Should I use ASPX or WPF. I read one topic about it but as far as I know aspx sites can be viewed from every device with internet browser: tablets, phones(Android, WP, iOS) and computers at the same time- so the job is done once and for all(Am I right?), I don't know nothing about aspx. Can WPF be also used in manner that does not need to port it for other platforms?

  Read the article

• I know fundamental programming. But how do I get started in game development now?

  - by Rohan Menon

  I'm a 20 year old programming student. I know fundamental programming in BASIC, C, C++ and JAVA. What I wanted to ask is, where do I go from here? Are there any books that the community can mention that will help me develop a game or at least learn game development? I've had a lot of ideas and really want to make some sort of prototype to see if I'm suited for the industry. I really don't mind learning any new languages but I need to know what I should begin with. A good book that will help with a little more understanding as I go up will be very helpful. Maybe a tutorial to develop some basic 2D games like a side-scroller, snake or pocket tanks in an easy to understand SDK? I know that to get some credit under your belt, you need to be able to make a few games on your own. Also, what platform should I start on? The PC, iOS or Android (as an introduction) for now. I don't want to get into high level game design just yet. Just something a bit basic to help out in future development. Anything pointing me in the right direction will be really really helpful. Edit: Also, I want to say that I'm looking towards this from a game designer's point of view more than a game programmer. I want suggestions on any SDKs or easy to use programs I can use to understand game design. Then delve deeper into the programming after that. Not as employment but as developing your own games (for now).

  Read the article

• Resizing partition using Gparted gives "can't have overlapping partitions" error

  - by Marcus

  I just decided to install Ubuntu 12.04 alongside Windows 7 on my Dell laptop. However I didn't do this manually but instead used the "Run Ubuntu alongside Windows 7" option upon installation, and now the partition that Ubuntu runs on has very little space (It's giving me warnings). I'm trying to use Gparted 0.12.1-5 (via a live CD) to give Windows less space and give Ubuntu more. I've managed to remove 100GB from the Windows partition so I now have some unallocated space between Windows and Ubuntu. This is what it looks like inside Ubuntu (not using the live CD, since it won't let me mount a USB to save a screenshot): http://i.stack.imgur.com/0keQq.png So first I take sda4 (extended?) and resize it to the left so it takes up all the unallocated space. Then I resize sda5 (ext4) as well so it takes up all the new space. However, when I hit apply, it fails on the first action (resizing sd4), saying "can't have overlapping partitions". Any ideas as to why this happens? I also tried resizing sda4 by just a few MB so that it definitely didn't overlap anything, but I still got the same error message. To clarify, I am doing it using the CD, I just took the screenshot from Ubuntu. Any help would be greatly appreciated! And again, I can't mount any USB (I'm following the guide on the gparted website but it says "Invalid argument" or something like that) so I couldn't attach the details file from Gparted. If this is needed, I may need some hints on how to solve the USB issue as well. :) Thanks

  Read the article

• Visual Studio 2010 Modeling and Architecture Tools

  - by MikeParks

  Jennifer Marsman (Microsoft Evangelist) and Cameron Skinner (Microsoft Visual Studio Product Unit Manager) recently stopped by our office while they were passing through Louisville on their tour to give us a presentation on the new Visual Studio 2010 Modeling and Architecture Tools. I checked out these new features when Visual Studio 2010 Beta versions originally rolled out and have been really impressed with this stuff ever since then. So it was pretty cool to actually learn some new techniques from Cameron himself since he helped write the actual code behind some of those features. If you've upgraded to Visual Studio 2010 recently I would highly recommend using the Architecture tools. They're awesome. If you want to make improvements to it, they even have their own SDK for it. There are plenty of blogs out there to show you how to use it. I've been waiting to find a tool that works like this where I can really analyze the code in solutions and projects and see how everything ties together. It's really handy if you're asked to work on a new project and aren't familiar with how it works. Just run the tools, analyze the DLL's, learn how everything works, and then you'll be ready to implement new code! It's a great tool to learn new systems quick and easy and it's all housed within the Visual Studio IDE. I just wanted to write a blog to brag about it a little bit, so I figured I'd throw this up here. It's a must have tool for Developers/Architects. Here's some screenshots of when I was using it earlier:   Thanks everyone! - Mike

  Read the article

• github team workflow - to fork or not?

  - by aporat

  We're a small team of web developers currently using subversion but soon we're making a switch to github. I'm looking at different types of github workflows, and we're not sure if the whole forking concept in github for each developer is such a good idea for us. If we use forks, I understand each developer will have his own private remote & local repositories. I'm worried it will make pushing changesets hard and too complex. Also, my biggest concern is that it will force each developer to have 2 remotes: origin (which is the remote fork) and an upstream (which is used to "sync" changes from the main repository). Not sure if it's such a easy way to do things. This is similar to the workflow explained here: https://github.com/usm-data-analysis/usm-data-analysis.github.com/wiki/Git-workflow If we don't use forks, we can probably get by fine by using a central repo creating a branch for each task we're working on, and merge them into the development branch on the same repository. It means we won't be able to restrict merging of branches and might be a little messy to have many branches on the central repository. Any suggestions from teams who tried both workflow?

  Read the article

• Standards Matter: The Battle For Interoperability Continues

  - by michael.rowell

  Great Article, although it is a little dated at this point. Information Week Article Standards Matter: The Battle for Interoperability goes on Summary If you're guilty of relegating standards support to a "nice to have" feature rather than a requirement, you're part of the problem. If you want products to interoperate, be prepared to walk away if a vendor can't prove compliance. Don't be brushed off with promises of standards support "on the road map." The alternative is vendor lock-in and higher costs, including the cost of maintaining systems that don't work together. Standards bodies are imperfect and must do better. The alternative: splintered networks and broken promises. The point: "The secret sauce to a successful 'working standard' isn't necessarily IETF or another longstanding body," says Jonathan Feldman, director of IT services for the city of Asheville, N.C., and an InformationWeek Analytics contributor. "Rather, an earnest and honest effort by a group that has governance outside of a single corporation's control is what's important." In order to have true interoperability vendors as well as customers must be actively engaged in the standards process. Vendors must be willing to truly work together and not be protecting an existing product. Customers must also be willing to truly to work together and not be demanding a solution that only meets their needs but instead meets the needs of all participants. Ultimately, customers must be willing to reward vendor compliance by requiring compliance in products and services that they purchase and deploy. Managers that deploy systems without compliance to standards are only hurting themselves. Standards do matter. When developed openly and deployed compliantly standards deliver interoperability which provides solid business value.

  Read the article

• Linqpad and StreamInsight

  Slightly before the announcement of StreamInsight being available for Linqpad I downloaded it from here.  I had seen Roman Schindlauer demonstrate it at Teched and it looked a really good tool to do some StreamInsight dev.   You will need .Net 4.0 and StreamInsight installed. Here’s what you need to do after downloading and installing Linqpad. Add a new connection   The next thing we need to do is install and enable the StreamInsight driver.  Choose to view more drivers.   Choose StreamInsight     Select the driver after install     I have chosen the Default Context.     And after all that I can finally get to writing my query.  This is a very simple query where I turn a collection (IEnumerable) into a PointStream.  After doing that I create 30 minute windows over the stream before outputting the count of events in each of those windows to the result window.     I have played with Linqpad only a little but I think it is going to be a really good tool to get ideas developed and quickly.  I have also enabled Autcompletion (paid £25) and I recommend it.

  Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >