Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 217/311 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

• Does RAID negatively affect non-RAID devices?

  - by Django Reinhardt

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to store documents on two HHDs (not SDDs) running under RAID 1. My motherboard has two SATA controllers, both set to AHCI. On the 3GB/s controller, all four ports are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive). Windows is on the 6GB/s controller. Like so: So my question is: If I turn these four ports (on the 3GB/s controller) into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will the HDD or Bluray drive be slower/incompatible with being plugged into a non-AHCI controller? Thanks.

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• What is a good topic for a research paper on modern computer architecture?

  - by Max Schmeling

  This may not be the right place for this, but I wanted to get this question in front of some of the brightest people on the internet, so I thought I'd give it a shot. I have to write a research paper on some modern aspect of computer architecture. The subject is really not very restrictive; pretty much any recent development in computer hardware will work. I want to write it over something really interesting, but I don't have a lot of good ideas. What would make a really interesting paper?

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• Error sysprepping Windows 8 Enterprise 90-day trial

  - by Philip

  I am using the Windows 8 Enterprise 90-day trial to evaluate the latest version of Windows for a private school. The way I work is that I use sysprep to prepare an generalized image, then I clone it to the school's computers. When I follow the instructions and try sysprep on my installation of Windows 8 in VirtualBox, sysprep thinks briefly and gives me an error message: Fatal error occurred while trying to sysprep the machine. Once I acknowledge it, sysprep closes. I checked the Windows Event Log, and there's nothing there that I could see. I also followed some instructions to cure this problem, but nothing changed. The error remains. My best guess is that the 90-day trial prohibits the use of sysprep, but I can't be sure. It might also be my use of VirtualBox, or who-knows-what. Has anyone had success with this, or encountered the same issue on real hardware?

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Looking for a product configurator

  - by Netsrac

  I am looking for a product configurator for products with high complexity. The main goal is to allow a sales person to configure the product in a correct and working manner. The product is a combination of hard- and software options. The options for sure have dependecies (so option A needs B and C) and can also exclude each other. The performance requirements of the software related to the hardware need to be considered. So some rules need to be defineable. Does anybody know a tool (preferred open source) doing that job? Thanks for your help.

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

• Getting the keyboard working on a MacBook under Windows XP x64

  - by Theran

  Despite Windows XP Professional x64's unsupported status on MacBooks (model A1181), I've managed to get most of the hardware working by manually installing either the drivers on the OS X Snow Leopard CD, or finding the appropriate drivers online. However, even after installing the Apple keyboard driver from the CD, I can't get Windows to actually use the special driver. Instead, the keyboard just shows up as a generic USB keyboard, with non-functioning Fn and other special keys. Being unable to generate a right-click or Ctrl-Alt-Del makes Windows a bit of a challenge to use. I've tried: uninstalling and reinstalling the keyboard driver removing the keyboard under device manager and letting Windows re-detect it using device manager to manually update the driver How do I get the special functions of the MacBook keyboard working under XP x64?

  Read the article

• Is it possible to host a website with Apache HTTP through a ZyXEL EQ-660R modem and a Netgear WGT624v3 wireless router?

  - by Vortico

  Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address. I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop. ZyXEL's website is no help, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck. Could someone direct me toward a solution or recommendations for more promising hardware? Or should I admit defeat and explore other hobbies? :)

  Read the article

• Origin of display connector numbers in XServer (e.g. HDMI1, HDMI2, DP1)

  - by Andreas N

  a custom mainboard has a DVI and a DisplayPort connector on the board. Currently, everything that is connected at DVI will be named "HDMI2" in XServer. I can see that by calling the "xrandr" tool (in Ubuntu Trusty Tahr). A display connected to the DP connector will be named "DP1" or "HDMI1", if I use a DP-to-DVI adapter. We are now testing a slightly upgraded board version, which has a newer CPU (Intel J1800, Baytrail) among other things and the position of the DVI and DP connectors are switched. Also, everything at the DVI port is called "HDMI1" and something connected to the DP port gets "DP2" or "HDMI2". Q: What causes these numbers to be produced in this manner and where (probably in the kernel) is it happening? I suspect the cause to be hardware related. Specifically, at which CPU pins the connector pins are routed and attached to. Q: Would it be possible to influence this numbering scheme in order to retain the previous numbering behaviour?

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Why do I have to enter my password every time I activate / deactivate AirPort (WiFi) on my MacBook P

  - by Another Registered User

  I use Snow Leopard, and I'm used to activate / deactivate WiFi like 20 times per day. The reason is that WiFi stops working properly after a few minutes of use. So every time I try to surf, I must stop/reactivate it first. But now, suddenly I have to enter my user password every time I want to do it. It's so annoying! The dialogue details say: Right: com.apple.airport.power Program: SystemUIServer What can I do that the Mac won't ask me for the password every time? It's hard enough that I have to stop/reactivate WiFi all the time (hardware bug). I have a admin account with full rights.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• IntelliPoint & Intellitype upgrade to Mouse and Keyboard Center causing system freeze?

  - by Kent England

  I allowed Microsoft to upgrade my wireless keyboard 6000 v3.0 and mouse 6000 v2.0 from Intelliyada v 8.20.468 to what appears to be v9.1.486. This was some time ago, so I can't be certain but this upgrade might be causing my system to freeze on the logon screen (user selection) in Windows 7 Home Premium 32-bit. Mouse and keyboard don't work, but system seems to be running underneath. No indication in Event Viewer about keyboard/mouse driver issues. Might be problem with transceiver hardware. I now have the "Microsoft Mouse and Keyboard Center" UI which isn't very helpful (seems to be very metro) in debugging these drivers. I'm just looking to see if anyone else had problems upgrading to this new Intelliyada software for their MS keyboard and rodent.

  Read the article

• Event 4625 - Logon Failure - Server 2008 R2 is logging them all over the place ! How to stop the attack?

  - by user72593

  I've been monitoring failed logons to a server which is directly connected to the internet with no hardware firewall in the way...testing purposes only. Using the Server 2008 R2 firewall, I blocked access to just about everything except RDP, then I told the firewall to only allow connections to the RDP port from "MY" static IP. I tested from other locations and I am not able to login to the server unless i'm at my office. So how are people coming from Chinese IP's able to attempt logons and get logged as failures ?? Is there something i'm missing that needs to be blocked? Any help would be appreciated.

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• Monitors blank after restart [closed]

  - by offler

  i need help on the following issue. We have Dell T1650 PCs with 2 nvidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• upgrading servers, need to keep domain same as before. what are the best practices?

  - by nLL

  Hi, I am upgrading a domain controller/file server from win2003 standard to win2008 r2 standard. We are planing to have a file server and an AD controller. Our old hardware will be scrapped, we want to copy all AD users/computers to new machine and keep current domain name. I never done this before. What are the best practices? Is it better if we get a contractor to do it for us? I guess best way to start is to build new servers, copy data, take old server down and put new server online. My gut says we would need to re-join all computers. Is that correct? Any input appreciated.

  Read the article

• A GFX card with two DVI and one HDMI with audio?

  - by TomaszRykala

  I haven't upgraded my PC for a while nor kept up to date with pc hardware since 2007, but have recently come up with a requirement and I am wondering if I can solve it! Are there any graphics cards out there that have two DVIs and one HDMI output, with the HDMI supporting sound over it? Basically, I've got a two PC monitor setup, and both monitors are connected to the two DVI's of my GTX9800+. I want to upgrade my card to say, GTX 460, but can't find if there is such with two DVIs (for my monitors) and one HDMI with audio (for my TV). So I am wondering, if such solution possible at all? I noticed that there are some cards out there with two DVI's and one mini-HDMI, but they all say 'HDMI Output Yes x 1 (via DVI to HDMI adaptor x 1 )', which probably means that because of the DVI element, the audio won't work. Is this true? Such card is an exmaple: http://uk.asus.com/Graphics_Cards/NVIDIA_Series/ENGTX460_DirectCU2DI1GD5/#specifications Many thanks for your help!

  Read the article

• minimum required bandwidth for remote database server

  - by user66734

  I want to build a small warehousing application for my company. We have a central warehouse which distributes to 8 sales points across the country. They insist on an in-house solution. I am thinking to setup a central mySQL db Linux server and have the branches connect to it to store sales. Queries to the db from the branches will be minimum, maybe 10 per hour. However I need all the branches to be able to store each sale data ( product ID, customer ID ) in the central db at peak time at most once every five minutes. My question is can I get away with simple 24mbps/768kbps DSL lines? If not what is the bandwith requirement? Can I rely on a load balancing router to combine additional lines if needed? Can you propose some server hardware specs?

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time [migrated]

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >