Search Results

Search found 24814 results on 993 pages for 'linux distro'.

Page 218/993 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

    - by EXIT_FAILURE
    My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. This was so that windows (or I) wouldn't inadvertently mess it up. However, and in retrospect, foolishly, I left the RAID disks connected, thinking that windows wouldn't be so ridiculous as to mess with a HDD that it sees as just unallocated space. Boy was I wrong! After copying over the installation files to the SSD (as expected and desired), it also created an ntfs partition on one of the RAID disks. Both unexpected and totally undesired! . I changed out the SSDs again, and booted up in linux. mdadm didn't seem to have any problem assembling the array as before, but if I tried to mount the array, I got the error message: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I then used qparted to delete the newly created ntfs partition on /dev/sdd so that it matched the other three /dev/sd{b,c,e}, and requested a resync of my array with echo repair > /sys/block/md0/md/sync_action This took around 4 hours, and upon completion, dmesg reports: md: md0: requested-resync done. A bit brief after a 4-hour task, though I'm unsure as to where other log files exist (I also seem to have messed up my sendmail configuration). In any case: No change reported according to mdadm, everything checks out. mdadm -D /dev/md0 still reports: Version : 1.2 Creation Time : Wed May 23 22:18:45 2012 Raid Level : raid6 Array Size : 3907026848 (3726.03 GiB 4000.80 GB) Used Dev Size : 1953513424 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon May 26 12:41:58 2014 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 4K Name : okamilinkun:0 UUID : 0c97ebf3:098864d8:126f44e3:e4337102 Events : 423 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde Trying to mount it still reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I'm a bit unsure where to proceed from here, and trying stuff "to see if it works" is a bit too risky for me. This is what I suggest I should attempt to do: Tell mdadm that /dev/sdd (the one that windows wrote into) isn't reliable anymore, pretend it is newly re-introduced to the array, and reconstruct its content based on the other three drives. I also could be totally wrong in my assumptions, that the creation of the ntfs partition on /dev/sdd and subsequent deletion has changed something that cannot be fixed this way. My question: Help, what should I do? If I should do what I suggested , how do I do that? From reading documentation, etc, I would think maybe: mdadm --manage /dev/md0 --set-faulty /dev/sdd mdadm --manage /dev/md0 --remove /dev/sdd mdadm --manage /dev/md0 --re-add /dev/sdd However, the documentation examples suggest /dev/sdd1, which seems strange to me, as there is no partition there as far as linux is concerned, just unallocated space. Maybe these commands won't work without. Maybe it makes sense to mirror the partition table of one of the other raid devices that weren't touched, before --re-add. Something like: sfdisk -d /dev/sdb | sfdisk /dev/sdd Bonus question: Why would the Windows 7 installation do something so st...potentially dangerous? Update I went ahead and marked /dev/sdd as faulty, and removed it (not physically) from the array: # mdadm --manage /dev/md0 --set-faulty /dev/sdd # mdadm --manage /dev/md0 --remove /dev/sdd However, attempting to --re-add was disallowed: # mdadm --manage /dev/md0 --re-add /dev/sdd mdadm: --re-add for /dev/sdd to /dev/md0 is not possible --add, was fine. # mdadm --manage /dev/md0 --add /dev/sdd mdadm -D /dev/md0 now reports the state as clean, degraded, recovering, and /dev/sdd as spare rebuilding. /proc/mdstat shows the recovery progress: md0 : active raid6 sdd[4] sdc[1] sde[3] sdb[0] 3907026848 blocks super 1.2 level 6, 4k chunk, algorithm 2 [4/3] [UU_U] [>....................] recovery = 2.1% (42887780/1953513424) finish=348.7min speed=91297K/sec nmon also shows expected output: ¦sdb 0% 87.3 0.0| > |¦ ¦sdc 71% 109.1 0.0|RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR > |¦ ¦sdd 40% 0.0 87.3|WWWWWWWWWWWWWWWWWWWW > |¦ ¦sde 0% 87.3 0.0|> || It looks good so far. Crossing my fingers for another five+ hours :) Update 2 The recovery of /dev/sdd finished, with dmesg output: [44972.599552] md: md0: recovery done. [44972.682811] RAID conf printout: [44972.682815] --- level:6 rd:4 wd:4 [44972.682817] disk 0, o:1, dev:sdb [44972.682819] disk 1, o:1, dev:sdc [44972.682820] disk 2, o:1, dev:sdd [44972.682821] disk 3, o:1, dev:sde Attempting mount /dev/md0 reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And on dmesg: [44984.159908] EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! [44984.159912] EXT4-fs (md0): group descriptors corrupted! I'm not sure what do do now. Suggestions? Output of dumpe2fs /dev/md0: dumpe2fs 1.42.8 (20-Jun-2013) Filesystem volume name: Atlas Last mounted on: /mnt/atlas Filesystem UUID: e7bfb6a4-c907-4aa0-9b55-9528817bfd70 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 244195328 Block count: 976756712 Reserved block count: 48837835 Free blocks: 92000180 Free inodes: 243414877 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 791 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stripe width: 2 Flex block group size: 16 Filesystem created: Thu May 24 07:22:41 2012 Last mount time: Sun May 25 23:44:38 2014 Last write time: Sun May 25 23:46:42 2014 Mount count: 341 Maximum mount count: -1 Last checked: Thu May 24 07:22:41 2012 Check interval: 0 (<none>) Lifetime writes: 4357 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: e177a374-0b90-4eaa-b78f-d734aae13051 Journal backup: inode blocks dumpe2fs: Corrupt extent header while reading journal super block

    Read the article

  • List all versions of a package

    - by askb
    Is there a equivalent of this command; yum list kernel-headers --showduplicates on Ubuntu with apt-get, apt-cache etc. The above command lists various versions of the kernel-headers rpm available on F20/RHEL or installations. Closet I can get using apt-cache showpkg, not sure if there is a better way ? $ apt-cache showpkg linux-image Package: linux-image Versions: Reverse Depends: firmware-crystalhd,linux-image systemtap,linux-image fiaif,linux-image Dependencies: Provides: Reverse Provides: linux-image-3.13.0-27-lowlatency 3.13.0-27.50 linux-image-3.13.0-27-generic 3.13.0-27.50 linux-image-3.13.0-24-lowlatency 3.13.0-24.47 linux-image-3.13.0-24-generic 3.13.0-24.47 linux-image-3.13.0-24-lowlatency 3.13.0-24.46 linux-image-3.13.0-24-generic 3.13.0-24.46 Expecting similar output: $ yum list kernel-headers --showduplicates Loaded plugins: langpacks, refresh-packagekit Installed Packages kernel-headers.x86_64 3.11.10-301.fc20 @fedora Available Packages kernel-headers.x86_64 3.11.10-301.fc20 fedora kernel-headers.x86_64 3.14.4-200.fc20 updates This would help me simply do a downgrade or upgrade to a specific version.

    Read the article

  • Ubuntu: Failure to login with multiple video adapters

    - by tsilb
    Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Bash can't start a programme that's there and has all the right permissions

    - by Rory
    This is a gentoo server. There's a programme prog that can't execute. (Yes the execute permission is set) About the file $ ls prog $ ./prog bash: ./prog: No such file or directory $ file prog prog: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.2.5, dynamically linked (uses shared libs), not stripped $ pwd /usr/local/bin $ /usr/local/bin/prog bash: /usr/local/bin/prog: No such file or directory $ less prog | head ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel 80386 Version: 0x1 I have a fancy less, to show that it's an actual executable, here's some more data: $ xxd prog |head 0000000: 7f45 4c46 0101 0100 0000 0000 0000 0000 .ELF............ 0000010: 0200 0300 0100 0000 c092 0408 3400 0000 ............4... 0000020: 0401 0a00 0000 0000 3400 2000 0700 2800 ........4. ...(. 0000030: 2600 2300 0600 0000 3400 0000 3480 0408 &.#.....4...4... 0000040: 3480 0408 e000 0000 e000 0000 0500 0000 4............... 0000050: 0400 0000 0300 0000 1401 0000 1481 0408 ................ 0000060: 1481 0408 1300 0000 1300 0000 0400 0000 ................ 0000070: 0100 0000 0100 0000 0000 0000 0080 0408 ................ 0000080: 0080 0408 21f1 0500 21f1 0500 0500 0000 ....!...!....... 0000090: 0010 0000 0100 0000 40f1 0500 4081 0a08 ........@...@... and $ ls -l prog -rwxrwxr-x 1 1000 devs 725706 Aug 6 2007 prog $ ldd prog not a dynamic executable $ strace ./prog 1249403877.639076 execve("./prog", ["./prog"], [/* 27 vars */]) = -1 ENOENT (No such file or directory) 1249403877.640645 dup(2) = 3 1249403877.640875 fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE) 1249403877.641143 fstat(3, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 1249403877.641484 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3b8954a000 1249403877.641747 lseek(3, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) 1249403877.642045 write(3, "strace: exec: No such file or dir"..., 40strace: exec: No such file or directory ) = 40 1249403877.642324 close(3) = 0 1249403877.642531 munmap(0x2b3b8954a000, 4096) = 0 1249403877.642735 exit_group(1) = ? About the server FTR the server is a xen domU, and the programme is a closed source linux application. This VM is a copy of another VM that has the same root filesystem (including this programme), that works fine. I've tried all the above as root and same problem. Did I mention the root filesystem is mounted over NFS. However it's mounted 'defaults,nosuid', which should include execute. Also I am able to run many other programmes from that mounted drive /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 1 cpu MHz : 2992.692 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu tsc msr pae mce cx8 apic mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogmips : 5989.55 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Example of a file that I can run I can run other programmes on that mounted filesystem on that server. For example: $ ls -l ls -rwxr-xr-x 1 root root 105576 Jul 25 17:14 ls $ file ls ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped $ ./ls attr cat cut echo getfacl ln more ... (you get the idea) ... rmdir sort tty $ less ls | head ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1

    Read the article

  • Where should I go with hosting my site: VPS, GAE, another option?

    - by Jonathan Hayward
    My website, http://JonathansCorner.com/, began life before 1994 as www.imsa.edu/~jhayward/ and has been through various iterations and improvements to content, HTML, and the like, but remains a literature site that is from a web administrator's perspective fairly simple and primitive: a fair amount of static HTML and supporting files, a little bit of CGI and URI rewriting, .htaccess files providing Expires: headers and the like. An associated site demoes various CGI scripts that fall under the category of "and other creations"; the site as a whole has the purpose of sharing my creative works, and so far a fairly rudimentary use of Apache functionality, supported by Unix tools to, for instance, update RSS feed and the "starting point" link on the home page, has served that purpose fairly well. I looked around here on web hosting, and found the note on web host reccommendations as a good note for "What are some of people's favorite web hosts overall," but I wanted to ask a more focused question of "What are the best web hosts for criteria XYZ:" I am looking at a VPS so I will have root, be able to install stuff and edit Apache's config files etc., running Gentoo or other Linux, BSD, or the like. I would like a system that is secure enough that the host's vulnerabilities are mostly the ones that come along with what I am trying to do: that is, I won't be trying to administer and secure an ancient Linux like some have complained about at 1and1. I would like good uptime/reliability and competent support staff: if the level 1 help desk is going to tell me to go to "My Computer" on a Linux box, I'd like to be able to get past them. Ideally I would like a site hosted within some place that will have low latency for U.S. visitors in particular. I would like a hosting solution that will be with a stable business, one that will probably be around, and one unlikely to vanish without warning. With those things specified, I would be interested in knowing what are the less expensive options. (I expect that some of the things I've specified will knock out all of the cheapest options, but I'm still interested in price.) With all that stated, I'd like to back up a bit and look at whether I am asking the right question. I am concerned that the above is a very good way of asking, "How can I keep my site in line with the wave of the past?" I am wondering if it might be specifically wiser to look to adapt my site to newer technologies instead of trying to keep it on older technologies. For instance, while I would hardly portray my site as a way to show off the full power of Google App Engine, the main site at least should be a straightforward port if I were to do that. And beyond Google App Engine, my knowledge of cloud solutions is basic. If it is a better and more future-proof solution to port my site to another kind of solution, I would be interested in knowing where those future-proof solutions lie. So I would be interested in wisdom. If the question I asked in detail is still a good question to be asking, what would people suggest? Or if I should seriously consider porting my site to a newer basic option, what should I try there? Any thoughts would be appreciated.

    Read the article

  • Slow disk transfer rate

    - by Nooklez
    I have problem with slow disk transfer rate. It's static files server for our website. I was making backup of data and noticed that tar is very slow. So I did hdparm -t and... hdparm -t /dev/sda3 /dev/sda3: Timing buffered disk reads: 6 MB in 4.70 seconds = 1.28 MB/sec It's low traffic hour now on our site, so huge I/O traffic is not a reason (iotop show less than 1 MB/s). It's RAID10 setup (2x2 SATA drives). Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 1396.96 W ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - WDC WD7500AADS-00M2 p1 OK u0 698.63 GB SATA 1 - WDC WD7500AADS-00M2 p2 OK u0 698.63 GB SATA 2 - WDC WD7500AADS-00M2 p3 OK u0 698.63 GB SATA 3 - WDC WD7500AADS-00M2 We have recently changed almost all components of server (excluding 3ware controller + disks). And I think problems started since then. Can it be configuration problem or hardware? EDIT: I found something like that in dmesg [166843.625843] irq 16: nobody cared (try booting with the "irqpoll" option) [166843.625846] Pid: 0, comm: swapper Not tainted 3.1.5-gentoo #3 [166843.625847] Call Trace: [166843.625848] <IRQ> [<ffffffff810859d5>] __report_bad_irq+0x35/0xc1 [166843.625856] [<ffffffff81085cec>] note_interrupt+0x165/0x1e1 [166843.625859] [<ffffffff8108445f>] handle_irq_event_percpu+0x16f/0x187 [166843.625861] [<ffffffff810844a9>] handle_irq_event+0x32/0x51 [166843.625863] [<ffffffff8108640b>] handle_fasteoi_irq+0x75/0x99 [166843.625866] [<ffffffff810039d7>] handle_irq+0x83/0x8b [166843.625868] [<ffffffff810036ad>] do_IRQ+0x48/0xa0 [166843.625871] [<ffffffff8155082b>] common_interrupt+0x6b/0x6b [166843.625872] <EOI> [<ffffffff812981e8>] ? acpi_safe_halt+0x22/0x35 [166843.625877] [<ffffffff812981e2>] ? acpi_safe_halt+0x1c/0x35 [166843.625879] [<ffffffff81298216>] acpi_idle_do_entry+0x1b/0x2b [166843.625881] [<ffffffff81298276>] acpi_idle_enter_c1+0x50/0x99 [166843.625884] [<ffffffff813b792a>] cpuidle_idle_call+0xed/0x171 [166843.625886] [<ffffffff81001257>] cpu_idle+0x55/0x81 [166843.625888] [<ffffffff81532a69>] rest_init+0x6d/0x6f [166843.625891] [<ffffffff81aa1aca>] start_kernel+0x329/0x334 [166843.625893] [<ffffffff81aa12a6>] x86_64_start_reservations+0xb6/0xba [166843.625894] [<ffffffff81aa139c>] x86_64_start_kernel+0xf2/0xf9 [166843.625896] handlers: [166843.625898] [<ffffffff812dc8de>] twl_interrupt [166843.625900] Disabling IRQ #16 It's related to problem? EDIT #2: Based on feedback in comments, here is more informations. cat /proc/interrupts 16: 390813 0 0 0 IO-APIC-fasteoi 3w-sas Controller model: [ 1.095350] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.095467] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.095641] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 1.095787] 3w-sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.095881] 3w-sas 0000:01:00.0: setting latency timer to 64 [ 1.910801] 3w-sas: scsi0: Found an LSI 3ware 9750-4i Controller at 0xfe560000, IRQ: 16. [ 2.216537] 3w-sas: scsi0: Firmware FH9X 5.08.00.008, BIOS BE9X 5.07.00.011, Phys: 8. [ 2.216836] scsi 0:0:0:0: Direct-Access LSI 9750-4i DISK 5.08 PQ: 0 ANSI: 5 And motherboard: description: Motherboard product: P8H67-M vendor: ASUSTeK Computer INC.

    Read the article

  • Unable to remove limit on memory usage for PHP script.

    - by Jess Telford
    The Situation I am having an issue with a PHP script getting the following error message: Fatal error: Out of memory (allocated 359923712) (tried to allocate 72 bytes) in /path/to/piwik/core/DataTable.php on line 969 The script I'm running is: /path/to/piwik/misc/cron/archive.sh I am assuming the numbers are Bytes, which means that total is approximately 360MB. For all intents and purposes, I have increased the memory limits on the server well above 360MB, yet this is the number (give or take a byte) it consistently errors out at. Please note: This question is not about fixing a memory leak in the script, nor about why the script itself is using so much memory. The script is part of the Piwik archiving process, so I cannot just fix any memory leaks, etc. For more info on this script and why I am increasing the memory limit, see "How to setup auto archiving" The question Given that the script is attempting to use over 360MB of memory, which I cannot change, why does it not seem possible for me to increase the amount of memory available to php on my server? What I've tried Increasing PHP's memory_limit Given the php.ini file: php -i | grep php.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini I have edited that file, so the memory_limit directive reads; memory_limit = -1 Restart Apache, and check the new value has stuck; $ php -i | grep memory_limit memory_limit => -1 => -1 Run the script, and get the same error. I've also tried 1G, 768M, etc, all to the same result (ie; no change). Update 22nd June: Based on Vangel's help, I have attempted to set post_max_size to 20M in combination with setting memory_limit. Again, this has no effect. Removing the memory limit on child processes of Apache I have found and edited the httpd.conf file to make sure there is no RLimitMEM directive. I then used WHM's Apache Configuration Memory Usage Restrictions to generate a restriction, which it claimed was at 1000M (and confirmed by checking httpd.conf). Both of these resulted in no change to the script erroring at 360MB. Increasing the per process memory limits of Linux The current limits set on the system: $ ulimit -m 524288 $ ulimit -v 524288 I have attempted to set both of these to unlimited: $ ulimit -m unlimited $ ulimit -v unlimited $ ulimit -m unlimited $ ulimit -v unlimited Once again, this has resulted in absolutely no improvement in my problem. My setup $ cat /etc/redhat-release CentOS release 5.5 (Final) $ uname -a Linux example.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux $ php -i | grep "PHP Version" PHP Version => 5.2.9 $ httpd -V Server version: Apache/2.0.63 Server built: Feb 2 2011 01:25:12 Cpanel::Easy::Apache v3.2.0 rev5291 Server's Module Magic Number: 20020903:13 Server loaded: APR 0.9.17, APR-UTIL 0.9.15 Compiled using: APR 0.9.17, APR-UTIL 0.9.15 Architecture: 64-bit Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D HTTPD_ROOT="/usr/local/apache" -D SUEXEC_BIN="/usr/local/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" Output of $ php -i: http://pastebin.com/EiRut6Nm

    Read the article

  • « SteamOS va aider Linux sur les ordinateurs de bureau » pour Linus Torvalds, qui n'est pas inquiet par la gratuité d'OS X

    « SteamOS va aider Linux sur les ordinateurs de bureau» pour Linus Torvalds, qui n'est pas inquiet par la gratuité d'OS X Linus Torvalds, père du noyau Linux, loue l'initiative de Valve avec son système d'exploitation SteamOS.S'exprimant lors de l'événement LinuxCon qui s'est tenu à Edinburgh, Torvalds a déclaré qu'il « aime les annonces Steam » et qu'il « pense que c'est une occasion qui pourrait aider [Linux] sur les ordinateurs de bureau ».Le père de Linux s'aligne ainsi avec la vision de...

    Read the article

  • Google Sync brings back Login Keyring from previous distro: How to remove?

    - by Mridul Malpotra
    I previously had Ubuntu 12.04 and had my Login Keyring set to a password that I don't remember and am not able to guess. I changed my Linux version to Mint 15 Cinnamon recently, but everytime I sync my Google account with my browser, the Login Keyring keeps coming back. I tried the /Preferences/Password method but there is no file as such which is created. Also, .gnome2 folder doesn't have any keyring file. How can I make the box go away for all?

    Read the article

  • Unpacking a ZTE ZXV10 H108L router firmware

    - by v3ng3ful
    I binwalked a firmware of a ZTE ZXV10 H108L, and got some encouraging results of uImage uboot, and LZMA compression, as well as a Squashfs 3.0 LZMA compressed filesystem. 256 0x100 uImage header, header size: 64 bytes, header CRC: 0xE70BCBB9, created: Thu Nov 10 04:54:54 2011, image size: 804172 bytes, Data Address: 0x80002000, Entry Point: 0x80266000, data CRC: 0x6EFE90F1, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: MIPS Linux-2.6.20 320 0x140 LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 2637958 bytes 851968 0xD0000 Squashfs filesystem, big endian, lzma signature, version 3.0, size: 2543403 bytes, 632 inodes, blocksize: 65536 bytes, created: Thu Nov 10 04:56:12 2011 Now what I did is, to test several portions of the file (320byte-end, 851968byte-end, and many more) using dd, and trying with certain tools to uncompress/unpack the filesystem of the firmware. After some digging I found out the best tool to do this is the firmware_mod_kit, that understands a squashfs-lzma v3 filesystem. Although I ended up really frustrated as unsquashfs-lzma v3 reported a cold "zlib::uncompress failed, unknown error -3". Do you have any ideas? Could it be that, the firmware is corrupted on purpose to discourage attempts like this? Router file Thanks

    Read the article

  • Pain removing a perl rootkit

    - by paul.ago
    So, we host a geoservice webserver thing at the office. Someone apparently broke into this box (probably via ftp or ssh), and put some kind of irc-managed rootkit thing. Now I'm trying to clean the whole thing up, I found the process pid who tries to connect via irc, but i can't figure out who's the invoking process (already looked with ps, pstree, lsof) The process is a perl script owned by www user, but ps aux |grep displays a fake file path on the last column. Is there another way to trace that pid and catch the invoker? Forgot to mention: the kernel is 2.6.23, which is exploitable to become root, but I can't touch this machine too much, so I can't upgrade the kernel EDIT: lsof might help: lsof -p 9481 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMEss perl 9481 www cwd DIR 8,2 608 2 /ss perl 9481 www rtd DIR 8,2 608 2 /ss perl 9481 www txt REG 8,2 1168928 38385 /usr/bin/perl5.8.8ss perl 9481 www mem REG 8,2 135348 23286 /lib64/ld-2.5.soss perl 9481 www mem REG 8,2 103711 23295 /lib64/libnsl-2.5.soss perl 9481 www mem REG 8,2 19112 23292 /lib64/libdl-2.5.soss perl 9481 www mem REG 8,2 586243 23293 /lib64/libm-2.5.soss perl 9481 www mem REG 8,2 27041 23291 /lib64/libcrypt-2.5.soss perl 9481 www mem REG 8,2 14262 23307 /lib64/libutil-2.5.soss perl 9481 www mem REG 8,2 128642 23303 /lib64/libpthread-2.5.soss perl 9481 www mem REG 8,2 1602809 23289 /lib64/libc-2.5.soss perl 9481 www mem REG 8,2 19256 38662 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/IO/IO.soss perl 9481 www mem REG 8,2 21328 38877 /usr/lib64/perl5/5.8.8/x86_64-linux-threa d-multi/auto/Socket/Socket.soss perl 9481 www mem REG 8,2 52512 23298 /lib64/libnss_files-2.5.soss perl 9481 www 0r FIFO 0,5 1068892 pipess perl 9481 www 1w FIFO 0,5 1071920 pipess perl 9481 www 2w FIFO 0,5 1068894 pipess perl 9481 www 3u IPv4 130646198 TCP 192.168.90.7:60321-www.**.net:ircd (SYN_SENT)

    Read the article

  • Ipsec reload fails to load ipsec.conf Strongswan 5.0

    - by Quentin Swain
    I am having trouble configuring a connection to an Android device using a fedora 17 linux machine and strongSwanv5.0.1dr2. I have made some progress but when I try adding the configuration to support xauth authentication I receive an error when I try to reload the configuration file. I get a similar error for the value ikev1 for the keyexchange setting , and whenever i try to set a value for rightauth. Has anyone else had this problem The man page for ipsec.conf and the documentation on the strongswan wiki both indicated that these settings and values should be fine in 5.0.x.x. I could try setting authby but that is deprecated according to the documentation i read and the xauthpsk value isn't working. Any help is much appreciated thanks. can not load config '/etc/ipsec.conf': /etc/ipsec.conf:25: syntax error, unexpected STRING [leftauth] # /etc/ipsec.conf - Openswan IPsec configuration file # # Manual: ipsec.conf.5 # # Please place your own config files in /etc/ipsec.d/ ending in .conf version 2.0 # conforms to second version of ipsec.conf specification # basic configuration config setup # For Red Hat Enterprise Linux and Fedora, leave protostack=netkey protostack=netkey # Enable this if you see "failed to find any available worker" # nhelpers=0 plutodebug=all conn %default ikelifetime=240m #keylifetime=20m keyingtries=3 ikev2=no conn android left=10.1.12.212 right=10.1.12.140 leftxauthserver=yes leftauth=psk rightauth=xauth keyexchange=ikev1 type=tunnel pfs=no rekey=no auto=start ike=aes256-md5;modp1024 phase2=esp ikev2=no #You may put your configuration (.conf) file in the "/etc/ipsec.d/" #include /etc/ipsec.d/*.conf

    Read the article

  • Changes made to cli's php.ini not taking effect

    - by Sandeepan Nath
    I have two php.ini files - /etc/php.ini which loads in case of cli /opt/lampp/etc/php.ini which loads in case of browser. I am able to use PHP's Mailparse extension after adding the line extension=mailparse.so in the /opt/lampp/etc/php.ini and restarting lampp. But I am not able to load the same in case of command line - getting PHP Fatal error: Call to undefined function mailparse_msg_create() in ... mailparse_msg_create() is a part of the Mailparse extension. I tried by relogging with the user after making the change and even restarting the system. What needs to be done so that the change takes effect. Update I checked that php -i | grep 'Configuration File' gives PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Update 2 I copied the mailparse.so from /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626 and put it in /usr/lib/php/modules. I added extension=mailparse.so to /etc/php.ini as well. But it still showed this warning PHP Warning: PHP Startup: Unable to load dynamic library ... As told by Lekensteyn, I did ldd /usr/lib/php/modules/mailparse.so and got ldd: warning: you do not have execution permission for /usr/lib/php/modules/mailparse.so' So I gave execute permission. Then ldd /usr/lib/php/modules/mailparse.so showed linux-gate.so.1 => (0x00110000) libc.so.6 => /lib/libc.so.6 (0x0011d000) /lib/ld-linux.so.2 (0x003aa000) which looks normal. BUt now, running php command says PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: undefined symbol: mbfl_name2no_encoding in Unknown on line 0

    Read the article

  • Existing open source software for wireless mesh networking?

    - by user70352
    Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

    Read the article

  • ssh tunnel - bind: Cannot assign requested address

    - by JosephK
    Trying to create a socks (-D) ssh tunnel - Linux box to Linux box (both centos): sshd running on remote side ok. From local machine we do / see this: ssh -D 1080 [email protected]. [email protected]'s password: bind: Cannot assign requested address (where 8.8.8.8 is really my server's IP and 'user' is my real username) I am logged into the remote side in this terminal-window. I can verify that the local port was unused prior to this command, and then used by an ssh process, after the command, via: netstat -lnp | grep 1080 So, unlike most googled-responses with this error, the problem would not seem to be the loopback interface assignment. If I try to use this tunnel with a mail client, the local-side permits the attempt (no 'proxy-failed' error), but no data / reply is returned. On the remote side, I do have "PermitTunnel yes" in my sshd_config (though 'yes' should be the default, anyway). Ideas or Clues? Here is the relevant debug-output OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * .... debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:1080 forwarded to remote address socks:0 debug1: Local forwarding listening on 127.0.0.1 port 1080. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 1080. bind: Cannot assign requested address debug1: channel 1: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.utf8 Other clue: If I run a Virtual Box on the client running Windows, open a tunnel with putty in that box, that tunnel, to the same remote server, works.

    Read the article

  • Upgrading Ubuntu to 9.04 breaks ATI video card driver, VESA and ati/radeon drivers

    - by Neil
    I upgraded my Ubuntu 8.10 to 9.04, and it not only broke the ATI proprietary fglrx driver, but also the ability to use the VESA or open-source ati or radeon drivers. I have an ATI RV610 which is an ATI Radeon HD 2400 XT. I have Linux Kernel 2.6.27-14-generic and 2.6.28-13-generic. With fglrx, vesa, ati and radeon, the Xserver hangs the machine as soon as it starts by invoking X or startx, which is seen by observing that caps lock doesn't work. There's nothing useful in /var/log/Xorg.0.log, no errors at all. This is with either kernel. When I download a new proprietary driver from ATI, I install it successfully on kernel 2.6.27, and it doesn't hang when X starts up, but it just shows a blank screen and does nothing. I also can't CTRL+ALT+Backspace out of X at this point. In all the years I've used ATI's Linux drivers, this has happened almost every time I've upgraded my kernel, but it's been fixable with much effort. This time I'm really stuck. Does anyone know how to fix these problems?

    Read the article

  • "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

    - by rzetterberg
    I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

    Read the article

  • NFS "Permission Denied" getting cached on NetApp Filer

    - by Christopher Karel
    We have a bunch of Linux boxes mounting NFS shares off a NetApp filer. From time to time, I will flub some part of the export configuration. Typo on one of the allowed hosts, incorrect IP address, etc, etc. No worries, this is usually done on a test system, or with brand new exports that aren't yet in production. However, I've found that once I've been denied permission to mount something from a Linux machine, the failure gets cached for as long as a day. I will correct the problem that was blocking the mount, re-export on the NetApp, and still not be able to mount the share. I'm pretty sure this caching is done at the NetApp side. It normally ages out after a day or so, but it really sucks having to wait until tomorrow to mount a share. I've tried exportfs -f on the NetApp, as well as dns flush. (I found both suggestions via Google) However, neither one works. I would sell my soul if someone could help out with a command/pagan ritual that would clear up this cache issue. --Christopher Karel

    Read the article

  • Install GRUB bootloader without installing Linux.

    - by Kavitesh Singh
    I have Windows 7 installed on the system and I want to create a separate WinPe bootable partition which system can fallback when things go wrong. Now Win7 does give this option and i might also edit the BCD store to make changes in the boot menu of Win7 or could use EasyBCD. I dont want to use these options as i need to customize hiding/unhiding of partitions at the time of booting etc. I search and found GRUB might the tool i am looking for. I want to use GRUB loader without any version of Linux installed on the system. Can someone guide me how i can install the GRUB on harddisk MBR and configure the bootmenu. I search internet and mostly i came across commands which search the GRUB on the harddisk because of existing linux installation and then try to repair it. In my case there is no Linux at all. I have Ubuntu 9.10 bootable CD/ OpenSUSE 11.2 liveCD and installation disc. Can i use them to install GRUB on my system?

    Read the article

  • How to boot Linux from a 16gb USB flash drive

    - by Chris Harris
    I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

    Read the article

  • Boot ISO image from GRUB4DOS on EFI machines

    - by Vladimir Tikhomirov
    I failed with loading ISO image (non-distro) from GRUB2 from USB stick, but found the way how I can boot the GRUB4DOS and then load the image from there. However, it doesn't work all the time and the questions is WHY it doesn't? Environment and loading process: We need to have EFI machine, USB stick, booting ISO, GRUB2 and GRUB4DOS. Last 3 on USB stick. Boot: USB - EFI loader - GRUB2 - GRUB4DOS - ISO image Configuration files To boot GRUB4DOS I use this from grub.cfg: menuentry "image.iso" { linux /syslinux/grub.exe --config-file="/menu.lst" } My menu.lst is here: timeout 20 default 0 title image.iso find --set-root --ignore-floppies --ignore-cd //image.iso map --heads=0 --sectors-per-track=0 //image.iso (hd32) map --hook chainloader (hd32) This works perfectly with Legacy machines. However, when I come to GRUB4DOS, I don't see the menu with image.iso, I see only GRUB command line. That means that my menu.lst didn't load. Why is it like this? Background and ideas I have an idea that GRUB4DOS doesn't recognize my USB stick as a device. I tried the command find and got (hd0,0), (hd0,1), (hd0,2), (rd). When I tried to set root to any of these devices I don't see fat file system, how it was with Legacy machines. The root device is (hd0,0), which has ntfs file system which should be partition with Windows. EFI machines support only GRUB2, so I can't boot GRUB4DOS straight away. Please, don't suggest anything like this, because my image doesn't have kernel. You can imagine that you load HDAT2 or Hiren's boot cd, for example. menuentry "Blancco Blancco5.iso" { set isofile="/image.iso" loopback loop $isofile set root=(loop) linux /isolinux/vmlinuz isofile=$isofile splash quiet initrd /isolinux/initrd }

    Read the article

  • How to find out where or if MYSQL5 logs are stored on a machine WHM/Cpanel

    - by moi
    I have a WHM/Cpanel re-seller hosting account on a virtual private server (Linux). I have root access to the machine via SSH I am trying to locate a file that contains information that will help me to determine which users have accessed what db and from which hosts. I would imagine this kind of data is stored in a log file somewhere. The MySQL page says: The general query log - Established client connections and statements received from clients See: http://dev.mysql.com/doc/refman/5.0/en/server-logs.html It also says: By default, all log files are created in the mysqld data directory. So, I am am NOT asking where are the general query log logs stored, (cos I expect I will get answers saying "it depends") Please help me work out: "How can go about finding out where MySQL general query log logs are stored on a linux machine" Couple of things i've already tried: I looked at /etc/my.cnf it was a tiny file that only contained the following info: [mysqld] skip-bdb skip-innodb set-variable = max_connections=500 safe-show-database ~ ~ I have looked in: /var/lib/mysql/ But I could not see any log-like file names in that directory. Any clues on this would be most welcome.

    Read the article

  • How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

    - by Alexander Ovchinnikov
    How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

    Read the article

  • Configure Plesk only for Tomcat-Java

    - by AJIT RANA
    I need to configure tomcat on Linux dedicate server only for Java project through Plesk . Following services is running on it. '1.Apache on port 80 ' '2.Tomcat on port 8080/9080' '3.Mysql on port 3306 ' Now problem is this, i need to run only java project on this server from port 80 .this time user type my site name then default page call index.html or .php file from root directory of Apache. so how it can be possible to run java project from this server default port 80 after deploye .war(java project) file to this server. Because user who wants to access my site does not know its port number for Tomcat as here is 9080 and also deploy file name. Pls look below for detail about problem Suppose my sit name is www.example.com and hosted on Linux dedicate server with Plesk install on it with Apache, Tomcat and Mysql. Now for running my java project on it, i need to enter www.example.com:9080/java_projrect_name/ in browser. So how can i run this project only from URL www.example.com and it will call default file .jsp from java_project_name directory. I do not want to enter port number and java_project_name in url and my client who wants to access this project did not know about port number as well as project name . He knows only about URL as www.example.com and when he browses it then it should call default page from java_project directory. So to implement this what should we need to do? Pls help. Thanks

    Read the article

  • TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

    - by Broam
    Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >