Search Results

Search found 6078 results on 244 pages for 'processing'.

Page 218/244 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• 7 Steps To Cut Recruiting Costs & Drive Exceptional Business Results

  - by Oracle Accelerate for Midsize Companies

  By Steve Viarengo, Vice President Product Management, Oracle Taleo Cloud Services  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In good times, trimming operational costs is an ongoing goal. In tough times, it’s a necessity. In both good times and bad, however, recruiting occurs. Growth increases headcount in good times, and opportunistic or replacement hiring occurs in slow business cycles. By employing creative recruiting strategies in tandem with the latest technology developments, you can reduce recruiting costs while driving exceptional business results. Here are some critical areas to focus on. 1.  Target Direct Cost Savings Total recruiting process expenses are the sum of external costs plus internal labor costs. Most organizations can reduce recruiting expenses with direct cost savings. While additional savings on indirect costs can be realized from process improvement and efficiency gains, there are direct cost savings and benefits readily available in three broad areas: sourcing, assessments, and green recruiting. 2. Sourcing: Reduce Agency Costs Agency search firm fees can amount to 35 percent of a new employee’s annual base salary. Typically taken from the hiring department budget, these fees may not be visible to HR. By relying on internal mobility programs, referrals, candidate pipelines, and corporate career Websites, organizations can reduce or eliminate this agency spend. And when you do have to pay third-party agency fees, you can optimize the value you receive by collaborating with agencies to identify referred candidates, ensure access to candidate data and history, and receive automatic notifications and correspondence. 3. Sourcing: Reduce Advertising Costs You can realize significant cost reductions by placing all job positions on your corporate career Website. This will allow you to reap a substantial number of candidates at minimal cost compared to job boards and other sourcing options. 4.  Sourcing: Internal Talent Pool Internal talent pools provide a way to reduce sourcing and advertising costs while delivering improved productivity and retention. Internal redeployment reduces costs and ramp-up time while increasing retention and employee satisfaction. 5.  Sourcing: External Talent Pool Strategic recruiting requires identifying and matching people with a given set of skills to a particular job while efficiently allocating sourcing expenditures. By using an e-recruiting system (which drives external talent pool management) with a candidate relationship database, you can automate prescreening and candidate matching while communicating with targeted candidates. Candidate relationship management can lower sourcing costs by marketing new job opportunities to candidates sourced in the past. By mining the talent pool in this fashion, you eliminate the need to source a new pool of candidates for each new requisition. Managing and mining the corporate candidate database can reduce the sourcing cost per candidate by as much as 50 percent. 6.  Assessments: Reduce Turnover Costs By taking advantage of assessments during the recruitment process, you can achieve a range of benefits, including better productivity, superior candidate performance, and lower turnover (providing considerable savings). Assessments also save recruiter and hiring manager time by focusing on a short list of qualified candidates. Hired for fit, such candidates tend to stay with the organization and produce quality work—ultimately driving revenue.  7. Green Recruiting: Reduce Paper and Processing Costs You can reduce recruiting costs by automating the process—and making it green. A paperless process informs candidates that you’re dedicated to green recruiting. It also leads to direct cost savings. E-recruiting reduces energy use and pollution associated with manufacturing, transporting, and recycling paper products. And process automation saves energy in mailing, storage, handling, filing, and reporting tasks. Direct cost savings come from reduced paperwork related to résumés, advertising, and onboarding. Improving the recruiting process through sourcing, assessments, and green recruiting not only saves costs. It also positions the company to improve the talent base during the recession while retaining the ability to grow appropriately in recovery. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• Finding it Hard to Deliver Right Customer Experience: Think BPM!

  - by Ajay Khanna

  Our relationship with our customers is not a just a single interaction and we should not treat it like one. A customer’s relationship with a vendor is like a journey which starts way before customer makes a purchase and lasts long after that. The journey may start with customer researching a product that may lead to the eventual purchase and may continue with support or service needs for the product. A typical customer journey can be represented as shown below: As you may notice, customers tend to use multiple channels to interact with a company throughout their journey.  They also expect that they should get consistent experience, no matter what interaction channel they may choose. Customers do not like to repeat the information they have already provided and expect companies to remember their preferences, and offer them relevant products and services. If the company fails to meet this expectation, customers not only will abandon the purchase and go to the competitor but may also influence others’ purchase decision. Gone are the days when word of mouth was the only medium, and the customer could influence “Six” others. This is the age of social media and customer’s good or bad experience, especially bad get highly amplified and may influence hundreds of others. Challenges that face B2C companies today include: Delivering consistent experience: The reason that delivering consistent experience is challenging is due to fragmented data, disjointed systems and siloed multichannel interactions. Customers tend to get different service quality if they use web vs. phone vs. store. They get different responses from different service agents or get inconsistent answers if they call sales vs. service group in the company. Such inconsistent experiences result in lower customer satisfaction or NPS (net promoter score) numbers. Increasing Revenue: To stay competitive companies frequently introduce new products and services. Delay in launching such offerings has a significant impact on revenue realization. In addition to new product revenue, there are multiple opportunities to up-sell and cross-sell that impact bottom line. If companies are not able to identify such opportunities, bring a product to market quickly, or not offer the right product to the right customer at the right time, significant loss of revenue may occur. Ensuring Compliance: Companies must be compliant to ever changing regulations, these could be about Know Your Customer (KYC), Export/Import regulations, or taxation policies. In addition to government agencies, companies also need to comply with the SLA that they have committed to their customers. Lapse in meeting any of these requirements may lead to serious fines, penalties and loss in business. Companies have to make sure that they are in compliance will all such regulations and SLA commitments, at any given time. With the advent of social networks and mobile technology, companies not only need to focus on process efficiency but also on customer engagement. Improving engagement means delivering the customer experience as the customer is expecting and interacting with the customer at right time using right channel. Customers expect to be able to contact you via any channel of their choice (web, email, chat, mobile, social media), purchase via any viable channel (web, phone, store, mobile). Customers expect companies to understand their particular needs and remember their preferences on repeated visits. To deliver such an integrated, consistent, and contextual experience, power of BPM in must. Your company may be organized in departments like Marketing, Sales, Service. You may hold prospect data in SFA, order information in ERP, customer issues in CRM. However, the experience delivered to the customer must not be constrained by your system legacy. BPM helps in designing the right experience for the right customer and integrates all the underlining channels, systems, applications to make sure right information will be delivered to the right knowledge worker or to the customer every single time.     Orchestrating information across all systems (MDM, CRM, ERP), departments (commerce, merchandising, marketing service) and channels (Email, phone, web, social)  is the key, and that’s what BPM delivers. In addition to orchestrating systems and channels for consistency, BPM also provides an ability for analysis and decision management. By using data from historical transactions, social media and from other systems, users can determine the customer preferences, customer value, and churn propensity. This information, in the context, is then used while making a decision at a process step. Working with real-time decision management system can also suggest right up-sell or cross-sell offers, discounts or next-best-action steps for a particular customer. Timely action on customer issues or request is also a key tenet of a good customer experience. BPM’s complex event processing capabilities help companies to take proactive actions before issues get escalated. BPM system can be designed to listen to a certain event patters then deduce from those customer situations (credit card stolen, baggage lost, change of address) and do a triage before situation goes out of control. If such a situation arises you can send alerts to right people or immediately invoke corrective actions. Last but not least one of BPM’s key values is to drive continuous improvement. Learning about customers past experiences, interactions and social conversations, provide valuable insight. Such insight can be used to improve products, customer facing processes, and customer experience. You may take these insights as an input to design better more efficient and customer friendly sales, contact center or self-service processes. If customer experience is important for your business, make sure you have incorporated BPM as a part of your strategy to design, orchestrate and improve your customer facing processes.

  Read the article

• Using BizTalk to bridge SQL Job and Human Intervention (Requesting Permission)

  - by Kevin Shyr

  I start off the process with either a BizTalk Scheduler (http://biztalkscheduledtask.codeplex.com/releases/view/50363) or a manual file drop of the XML message.  The manual file drop is to allow the SQL  Job to call a "File Copy" SSIS step to copy the trigger file for the next process and allows SQL  Job to be linked back into BizTalk processing. The Process Trigger XML looks like the following.  It is basically the configuration hub of the business process <ns0:MsgSchedulerTriggerSQLJobReceive xmlns:ns0="urn:com:something something">   <ns0:IsProcessAsync>YES</ns0:IsProcessAsync>   <ns0:IsPermissionRequired>YES</ns0:IsPermissionRequired>   <ns0:BusinessProcessName>Data Push</ns0:BusinessProcessName>   <ns0:EmailFrom>[email protected]</ns0:EmailFrom>   <ns0:EmailRecipientToList>[email protected]</ns0:EmailRecipientToList>   <ns0:EmailRecipientCCList>[email protected]</ns0:EmailRecipientCCList>   <ns0:EmailMessageBodyForPermissionRequest>This message was sent to request permission to start the Data Push process.  The SQL Job to be run is WeeklyProcessing_DataPush</ns0:EmailMessageBodyForPermissionRequest>   <ns0:SQLJobName>WeeklyProcessing_DataPush</ns0:SQLJobName>   <ns0:SQLJobStepName>Push_To_Production</ns0:SQLJobStepName>   <ns0:SQLJobMinToWait>1</ns0:SQLJobMinToWait>   <ns0:PermissionRequestTriggerPath>\\server\ETL-BizTalk\Automation\TriggerCreatedByBizTalk\</ns0:PermissionRequestTriggerPath>   <ns0:PermissionRequestApprovedPath>\\server\ETL-BizTalk\Automation\Approved\</ns0:PermissionRequestApprovedPath>   <ns0:PermissionRequestNotApprovedPath>\\server\ETL-BizTalk\Automation\NotApproved\</ns0:PermissionRequestNotApprovedPath> </ns0:MsgSchedulerTriggerSQLJobReceive>   Every node of this schema was promoted to a distinguished field so that the values can be used for decision making in the orchestration.  The first decision made is on the "IsPermissionRequired" field.     If permission is required (IsPermissionRequired=="YES"), BizTalk will use the configuration info in the XML trigger to format the email message.  Here is the snippet of how the email message is constructed. SQLJobEmailMessage.EmailBody     = new Eai.OrchestrationHelpers.XlangCustomFormatters.RawString(         MsgSchedulerTriggerSQLJobReceive.EmailMessageBodyForPermissionRequest +         "<br><br>" +         "By moving the file, you are either giving permission to the process, or disapprove of the process." +         "<br>" +         "This is the file to move: \"" + PermissionTriggerToBeGenereatedHere +         "\"<br>" +         "(You may find it easier to open the destination folder first, then navigate to the sibling folder to get to this file)" +         "<br><br>" +         "To approve, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestApprovedPath +         "<br><br>" +         "To disapprove, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestNotApprovedPath +         "<br><br>" +         "The file will be IMMEDIATELY picked up by the automated process.  This is normal.  You should receive a message soon that the file is processed." +         "<br>" +         "Thank you!"     ); SQLJobSendNotification(Microsoft.XLANGs.BaseTypes.Address) = "mailto:" + MsgSchedulerTriggerSQLJobReceive.EmailRecipientToList; SQLJobEmailMessage.EmailBody(Microsoft.XLANGs.BaseTypes.ContentType) = "text/html"; SQLJobEmailMessage(SMTP.Subject) = "Requesting Permission to Start the " + MsgSchedulerTriggerSQLJobReceive.BusinessProcessName; SQLJobEmailMessage(SMTP.From) = MsgSchedulerTriggerSQLJobReceive.EmailFrom; SQLJobEmailMessage(SMTP.CC) = MsgSchedulerTriggerSQLJobReceive.EmailRecipientCCList; SQLJobEmailMessage(SMTP.EmailBodyFileCharset) = "UTF-8"; SQLJobEmailMessage(SMTP.SMTPHost) = "localhost"; SQLJobEmailMessage(SMTP.MessagePartsAttachments) = 2;   After the Permission request email is sent, the next step is to generate the actual Permission Trigger file.  A correlation set is used here on SQLJobName and a newly generated GUID field. <?xml version="1.0" encoding="utf-8"?><ns0:SQLJobAuthorizationTrigger xmlns:ns0="somethingsomething"><SQLJobName>Data Push</SQLJobName><CorrelationGuid>9f7c6b46-0e62-46a7-b3a0-b5327ab03753</CorrelationGuid></ns0:SQLJobAuthorizationTrigger> The end user (the human intervention piece) will either grant permission for this process, or deny it, by moving the Permission Trigger file to either the "Approved" folder or the "NotApproved" folder.  A parallel Listen shape is waiting for either response.   The next set of steps decide how the SQL Job is to be called, or whether it is called at all.  If permission denied, it simply sends out a notification.  If permission is granted, then the flag (IsProcessAsync) in the original Process Trigger is used.  The synchonous part is not really synchronous, but a loop timer to check the status within the calling stored procedure (for more information, check out my previous post:  http://geekswithblogs.net/LifeLongTechie/archive/2010/11/01/execute-sql-job-synchronously-for-biztalk-via-a-stored-procedure.aspx)  If it's async, then the sp starts the job and BizTalk sends out an email.   And of course, some error notification:   Footnote: The next version of this orchestration will have an additional parallel line near the Listen shape with a Delay built in and a Loop to send out a daily reminder if no response has been received from the end user.  The synchronous part is used to gather results and execute a data clean up process so that the SQL Job can be re-tried.  There are manu possibilities here.

  Read the article

• CPU Usage in Very Large Coherence Clusters

  - by jpurdy

  When sizing Coherence installations, one of the complicating factors is that these installations (by their very nature) tend to be application-specific, with some being large, memory-intensive caches, with others acting as I/O-intensive transaction-processing platforms, and still others performing CPU-intensive calculations across the data grid. Regardless of the primary resource requirements, Coherence sizing calculations are inherently empirical, in that there are so many permutations that a simple spreadsheet approach to sizing is rarely optimal (though it can provide a good starting estimate). So we typically recommend measuring actual resource usage (primarily CPU cycles, network bandwidth and memory) at a given load, and then extrapolating from those measurements. Of course there may be multiple types of load, and these may have varying degrees of correlation -- for example, an increased request rate may drive up the number of objects "pinned" in memory at any point, but the increase may be less than linear if those objects are naturally shared by concurrent requests. But for most reasonably-designed applications, a linear resource model will be reasonably accurate for most levels of scale. However, at extreme scale, sizing becomes a bit more complicated as certain cluster management operations -- while very infrequent -- become increasingly critical. This is because certain operations do not naturally tend to scale out. In a small cluster, sizing is primarily driven by the request rate, required cache size, or other application-driven metrics. In larger clusters (e.g. those with hundreds of cluster members), certain infrastructure tasks become intensive, in particular those related to members joining and leaving the cluster, such as introducing new cluster members to the rest of the cluster, or publishing the location of partitions during rebalancing. These tasks have a strong tendency to require all updates to be routed via a single member for the sake of cluster stability and data integrity. Fortunately that member is dynamically assigned in Coherence, so it is not a single point of failure, but it may still become a single point of bottleneck (until the cluster finishes its reconfiguration, at which point this member will have a similar load to the rest of the members). The most common cause of scaling issues in large clusters is disabling multicast (by configuring well-known addresses, aka WKA). This obviously impacts network usage, but it also has a large impact on CPU usage, primarily since the senior member must directly communicate certain messages with every other cluster member, and this communication requires significant CPU time. In particular, the need to notify the rest of the cluster about membership changes and corresponding partition reassignments adds stress to the senior member. Given that portions of the network stack may tend to be single-threaded (both in Coherence and the underlying OS), this may be even more problematic on servers with poor single-threaded performance. As a result of this, some extremely large clusters may be configured with a smaller number of partitions than ideal. This results in the size of each partition being increased. When a cache server fails, the other servers will use their fractional backups to recover the state of that server (and take over responsibility for their backed-up portion of that state). The finest granularity of this recovery is a single partition, and the single service thread can not accept new requests during this recovery. Ordinarily, recovery is practically instantaneous (it is roughly equivalent to the time required to iterate over a set of backup backing map entries and move them to the primary backing map in the same JVM). But certain factors can increase this duration drastically (to several seconds): large partitions, sufficiently slow single-threaded CPU performance, many or expensive indexes to rebuild, etc. The solution of course is to mitigate each of those factors but in many cases this may be challenging. Larger clusters also lead to the temptation to place more load on the available hardware resources, spreading CPU resources thin. As an example, while we've long been aware of how garbage collection can cause significant pauses, it usually isn't viewed as a major consumer of CPU (in terms of overall system throughput). Typically, the use of a concurrent collector allows greater responsiveness by minimizing pause times, at the cost of reducing system throughput. However, at a recent engagement, we were forced to turn off the concurrent collector and use a traditional parallel "stop the world" collector to reduce CPU usage to an acceptable level. In summary, there are some less obvious factors that may result in excessive CPU consumption in a larger cluster, so it is even more critical to test at full scale, even though allocating sufficient hardware may often be much more difficult for these large clusters.

  Read the article

• Application Composer Series: Where and When to use Groovy

  - by Richard Bingham

  This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

  Read the article

• Trouble with AABB collision response and physics

  - by WCM

  I have been racking my brain trying to figure out a problem I am having with physics and basic AABB collision response. I am fairly close as the physics are mostly right. Gravity feels good and movement is solid. The issue I am running into is that when I land on the test block in my project, I can jump off of it most of the time. If I repeatedly jump in place, I will eventually get stuck one or two pixels below the surface of the test block. If I try to jump, I can become free of the other block, but it will happen again a few jumps later. I feel like I am missing something really obvious with this. I have two functions that support the detection and function to return a vector for the overlap of the two rectangle bounding boxes. I have a single update method that is processing the physics and collision for the entity. I feel like I am missing something very simple, like an ordering of the physics vs. collision response handling. Any thoughts or help can be appreciated. I apologize for the format of the code, tis prototype code mostly. The collision detection function: public static bool Collides(Rectangle source, Rectangle target) { if (source.Right < target.Left || source.Bottom < target.Top || source.Left > target.Right || source.Top > target.Bottom) { return false; } return true; } The overlap function: public static Vector2 GetMinimumTranslation(Rectangle source, Rectangle target) { Vector2 mtd = new Vector2(); Vector2 amin = source.Min(); Vector2 amax = source.Max(); Vector2 bmin = target.Min(); Vector2 bmax = target.Max(); float left = (bmin.X - amax.X); float right = (bmax.X - amin.X); float top = (bmin.Y - amax.Y); float bottom = (bmax.Y - amin.Y); if (left > 0 || right < 0) return Vector2.Zero; if (top > 0 || bottom < 0) return Vector2.Zero; if (Math.Abs(left) < right) mtd.X = left; else mtd.X = right; if (Math.Abs(top) < bottom) mtd.Y = top; else mtd.Y = bottom; // 0 the axis with the largest mtd value. if (Math.Abs(mtd.X) < Math.Abs(mtd.Y)) mtd.Y = 0; else mtd.X = 0; return mtd; } The update routine (gravity = 0.001f, jumpHeight = 0.35f, moveAmount = 0.15f): public void Update(GameTime gameTime) { Acceleration.Y = gravity; Position += new Vector2((float)(movement * moveAmount * gameTime.ElapsedGameTime.TotalMilliseconds), (float)(Velocity.Y * gameTime.ElapsedGameTime.TotalMilliseconds)); Velocity.Y += Acceleration.Y; Vector2 previousPosition = new Vector2((int)Position.X, (int)Position.Y); KeyboardState keyboard = Keyboard.GetState(); movement = 0; if (keyboard.IsKeyDown(Keys.Left)) { movement -= 1; } if (keyboard.IsKeyDown(Keys.Right)) { movement += 1; } if (Position.Y + 16 > GameClass.Instance.GraphicsDevice.Viewport.Height) { Velocity.Y = 0; Position = new Vector2(Position.X, GameClass.Instance.GraphicsDevice.Viewport.Height - 16); IsOnSurface = true; } if (Collision.Collides(BoundingBox, GameClass.Instance.block.BoundingBox)) { Vector2 mtd = Collision.GetMinimumTranslation(BoundingBox, GameClass.Instance.block.BoundingBox); Position += mtd; Velocity.Y = 0; IsOnSurface = true; } if (keyboard.IsKeyDown(Keys.Space) && !previousKeyboard.IsKeyDown(Keys.Space)) { if (IsOnSurface) { Velocity.Y = -jumpHeight; IsOnSurface = false; } } previousKeyboard = keyboard; } This is also a full download to the project. https://www.box.com/s/3rkdtbso3xgfgc2asawy P.S. I know that I could do this with the XNA Platformer Starter Kit algo, but it has some deep flaws that I am going to try to live without. I'd rather go the route of collision response via an overlay function. Thanks for any and all insight!

  Read the article

• Cloud Computing Forces Better Design Practices

  - by Herve Roggero

  Is cloud computing simply different than on premise development, or is cloud computing actually forcing you to create better applications than you normally would? In other words, is cloud computing merely imposing different design principles, or forcing better design principles?  A little while back I got into a discussion with a developer in which I was arguing that cloud computing, and specifically Windows Azure in his case, was forcing developers to adopt better design principles. His opinion was that cloud computing was not yielding better systems; just different systems. In this blog, I will argue that cloud computing does force developers to use better design practices, and hence better applications. So the first thing to define, of course, is the word “better”, in the context of application development. Looking at a few definitions online, better means “superior quality”. As it relates to this discussion then, I stipulate that cloud computing can yield higher quality applications in terms of scalability, everything else being equal. Before going further I need to also outline the difference between performance and scalability. Performance and scalability are two related concepts, but they don’t mean the same thing. Scalability is the measure of system performance given various loads. So when developers design for performance, they usually give higher priority to a given load and tend to optimize for the given load. When developers design for scalability, the actual performance at a given load is not as important; the ability to ensure reasonable performance regardless of the load becomes the objective. This can lead to very different design choices. For example, if your objective is to obtains the fastest response time possible for a service you are building, you may choose the implement a TCP connection that never closes until the client chooses to close the connection (in other words, a tightly coupled service from a connectivity standpoint), and on which a connection session is established for faster processing on the next request (like SQL Server or other database systems for example). If you objective is to scale, you may implement a service that answers to requests without keeping session state, so that server resources are released as quickly as possible, like a REST service for example. This alternate design would likely have a slower response time than the TCP service for any given load, but would continue to function at very large loads because of its inherently loosely coupled design. An example of a REST service is the NO-SQL implementation in the Microsoft cloud called Azure Tables. Now, back to cloud computing… Cloud computing is designed to help you scale your applications, specifically when you use Platform as a Service (PaaS) offerings. However it’s not automatic. You can design a tightly-coupled TCP service as discussed above, and as you can imagine, it probably won’t scale even if you place the service in the cloud because it isn’t using a connection pattern that will allow it to scale [note: I am not implying that all TCP systems do not scale; I am just illustrating the scalability concepts with an imaginary TCP service that isn’t designed to scale for the purpose of this discussion]. The other service, using REST, will have a better chance to scale because, by design, it minimizes resource consumption for individual requests and doesn’t tie a client connection to a specific endpoint (which means you can easily deploy this service to hundreds of machines without much trouble, as long as your pockets are deep enough). The TCP and REST services discussed above are both valid designs; the TCP service is faster and the REST service scales better. So is it fair to say that one service is fundamentally better than the other? No; not unless you need to scale. And if you don’t need to scale, then you don’t need the cloud in the first place. However, it is interesting to note that if you do need to scale, then a loosely coupled system becomes a better design because it can almost always scale better than a tightly-coupled system. And because most applications grow overtime, with an increasing user base, new functional requirements, increased data and so forth, most applications eventually do need to scale. So in my humble opinion, I conclude that a loosely coupled system is not just different than a tightly coupled system; it is a better design, because it will stand the test of time. And in my book, if a system stands the test of time better than another, it is of superior quality. Because cloud computing demands loosely coupled systems so that its underlying service architecture can be leveraged, developers ultimately have no choice but to design loosely coupled systems for the cloud. And because loosely coupled systems are better… … the cloud forces better design practices. My 2 cents.

  Read the article

• How You Helped Shape Java EE 7...

  - by reza_rahman

  I have been working with the JCP in various roles since EJB 3/Java EE 5 (much of it on my own time), eventually culminating in my decision to accept my current role at Oracle (despite it's inevitable set of unique challenges, a role I find by and large positive and fulfilling). During these years, it has always been clear to me that pretty much everyone in the JCP genuinely cares about openness, feedback and developer participation. Perhaps the most visible sign to date of this high regard for grassroots level input is a survey on Java EE 7 gathered a few months ago. The survey was designed to get open feedback on a number of critical issues central to the Java EE 7 umbrella specification including what APIs to include in the standard. When we started the survey, I don't think anyone was certain what the level of participation from developers would really be. I also think everyone was pleasantly surprised that a large number of developers (around 1100) took the time out to vote on these very important issues that could impact their own professional life. And it wasn't just a matter of the quantity of responses. I was particularly impressed with the quality of the comments made through the survey (some of which I'll try to do justice to below). With Java EE 7 under our belt and the horizons for Java EE 8 emerging, this is a good time to thank everyone that took the survey once again for their thoughts and let you know what the impact of your voice actually was. As an aside, you may be happy to know that we are working hard behind the scenes to try to put together a similar survey to help kick off the agenda for Java EE 8 (although this is by no means certain). I'll break things down by the questions asked in the survey, the responses and the resulting change in the specification. APIs to Add to Java EE 7 Full/Web Profile The first question in the survey asked which of four new candidate APIs (WebSocket, JSON-P, JBatch and JCache) should be added to the Java EE 7 Full and Web profile respectively. Developers by and large wanted all the new APIs added to the full platform. The comments expressed particularly strong support for WebSocket and JCache. Others expressed dissatisfaction over the lack of a JSON binding (as opposed to JSON processing) API. WebSocket, JSON-P and JBatch are now part of Java EE 7. In addition, the long-awaited Java EE Concurrency Utilities API was also included in the Full Profile. Unfortunately, JCache was not finalized in time for Java EE 7 and the decision was made not to hold up the Java EE release any longer. JCache continues to move forward strongly and will very likely be included in Java EE 8 (it will be available much sooner than Java EE 8 to boot). An emergent standard for JSON-B is also a strong possibility for Java EE 8. When it came to the Web Profile, developers were supportive of adding WebSocket and JSON-P, but not JBatch and JCache. Both WebSocket and JSON-P are now part of the Web Profile, now also including the already popular JAX-RS API. Enabling CDI by Default The second question asked whether CDI should be enabled in Java EE by default. The overwhelming majority of developers supported the default enablement of CDI. In addition, developers expressed a desire for better CDI/Java EE alignment (with regards to EJB and JSF in particular). Some developers expressed legitimate concerns over the performance implications of enabling CDI globally as well as the potential conflict with other JSR 330 implementations like Spring and Guice. CDI is enabled by default in Java EE 7. Respecting the legitimate concerns, CDI 1.1 was very careful to add additional controls around component scanning. While a lot of work was done in Java EE 6 and Java EE 7 around CDI alignment, further alignment is under serious consideration for Java EE 8. Consistent Usage of @Inject The third question was around using CDI/JSR 330 @Inject consistently vs. allowing JSRs to create their own injection annotations (e.g. @BatchContext). A majority of developers wanted consistent usage of @Inject. The comments again reflected a strong desire for CDI/Java EE alignment. A lot of emphasis in Java EE 7 was put into using @Inject consistently. For example, the JBatch specification is focused on using @Inject wherever possible. JAX-RS remains an exception with it's existing custom injection annotations. However, the JAX-RS specification leads understand the importance of eventual convergence, hopefully in Java EE 8. Expanding the Use of @Stereotype The fourth question was about expanding CDI @Stereotype to cover annotations across Java EE beyond just CDI. A solid majority of developers supported the idea of making @Stereotype more universal in Java EE. The comments maintained the general theme of strong support for CDI/Java EE alignment Unfortunately, there was not enough time and resources in Java EE 7 to implement this fairly pervasive feature. However, it remains a serious consideration for Java EE 8. Expanding Interceptor Use The final set of questions was about expanding interceptors further across Java EE. Developers strongly supported the concept. Along with injection, interceptors are now supported across all Java EE 7 components including Servlets, Filters, Listeners, JAX-WS endpoints, JAX-RS resources, WebSocket endpoints and so on. I hope you are encouraged by how your input to the survey helped shape Java EE 7 and continues to shape Java EE 8. Participating in these sorts of surveys is of course just one way of contributing to Java EE. Another great way to stay involved is the Adopt-A-JSR Program. A large number of developers are already participating through their local JUGs. You could of course become a Java EE JSR expert group member or observer. You should stay tuned to The Aquarium for the progress of Java EE 8 JSRs if that's something you want to look into...

  Read the article

• Java Port Socket Programming Error

  - by atrus-darkstone

  Hi- I have been working on a java client-server program using port sockets. The goal of this program is for the client to take a screenshot of the machine it is running on, break the RGB info of this image down into integers and arrays, then send this info over to the server, where it is reconstructed into a new image file. However, when I run the program I am experiencing the following two bugs: The first number recieved by the server, no matter what its value is according to the client, is always 49. The client only sends(or the server only receives?) the first value, then the program hangs forever. Any ideas as to why this is happening, and what I can do to fix it? The code for both client and server is below. Thanks! CLIENT: import java.awt.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.image.BufferedImage; import java.io.*; import java.net.Socket; import java.text.SimpleDateFormat; import java.util.*; import javax.swing.*; import javax.swing.Timer; public class ViewerClient implements ActionListener{ private Socket vSocket; private BufferedReader in; private PrintWriter out; private Robot robot; // static BufferedReader orders = null; public ViewerClient() throws Exception{ vSocket = null; in = null; out = null; robot = null; } public void setVSocket(Socket vs) { vSocket = vs; } public void setInput(BufferedReader i) { in = i; } public void setOutput(PrintWriter o) { out = o; } public void setRobot(Robot r) { robot = r; } /*************************************************/ public Socket getVSocket() { return vSocket; } public BufferedReader getInput() { return in; } public PrintWriter getOutput() { return out; } public Robot getRobot() { return robot; } public void run() throws Exception{ int speed = 2500; int pause = 5000; Timer timer = new Timer(speed, this); timer.setInitialDelay(pause); // System.out.println("CLIENT: Set up timer."); try { setVSocket(new Socket("Alex-PC", 4444)); setInput(new BufferedReader(new InputStreamReader(getVSocket().getInputStream()))); setOutput(new PrintWriter(getVSocket().getOutputStream(), true)); setRobot(new Robot()); // System.out.println("CLIENT: Established connection and IO ports."); // timer.start(); captureScreen(nameImage()); }catch(Exception e) { System.err.println(e); } } public void captureScreen(String fileName) throws Exception{ Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize(); Rectangle screenRectangle = new Rectangle(screenSize); BufferedImage image = getRobot().createScreenCapture(screenRectangle); int width = image.getWidth(); int height = image.getHeight(); int[] pixelData = new int[(width * height)]; image.getRGB(0,0, width, height, pixelData, width, height); byte[] imageData = new byte[(width * height)]; String fromServer = null; if((fromServer = getInput().readLine()).equals("READY")) { sendWidth(width); sendHeight(height); sendArrayLength((width * height)); sendImageInfo(fileName); sendImageData(imageData); } /* System.out.println(imageData.length); String fromServer = null; for(int i = 0; i < pixelData.length; i++) { imageData[i] = ((byte)pixelData[i]); } System.out.println("CLIENT: Pixel data successfully converted to byte data."); System.out.println("CLIENT: Waiting for ready message..."); if((fromServer = getInput().readLine()).equals("READY")) { System.out.println("CLIENT: Ready message recieved."); getOutput().println("SENDING ARRAY LENGTH..."); System.out.println("CLIENT: Sending array length..."); System.out.println("CLIENT: " + imageData.length); getOutput().println(imageData.length); System.out.println("CLIENT: Array length sent."); getOutput().println("SENDING IMAGE..."); System.out.println("CLIENT: Sending image data..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } System.out.println("CLIENT: Image data sent."); getOutput().println("SENDING IMAGE WIDTH..."); System.out.println("CLIENT: Sending image width..."); getOutput().println(width); System.out.println("CLIENT: Image width sent."); getOutput().println("SENDING IMAGE HEIGHT..."); System.out.println("CLIENT: Sending image height..."); getOutput().println(height); System.out.println("CLIENT: Image height sent..."); getOutput().println("SENDING IMAGE INFO..."); System.out.println("CLIENT: Sending image info..."); getOutput().println(fileName); System.out.println("CLIENT: Image info sent."); getOutput().println("FINISHED."); System.out.println("Image data sent successfully."); } if((fromServer = getInput().readLine()).equals("CLOSE DOWN")) { getOutput().close(); getInput().close(); getVSocket().close(); } */ } public String nameImage() throws Exception { String dateFormat = "yyyy-MM-dd HH-mm-ss"; Calendar cal = Calendar.getInstance(); SimpleDateFormat sdf = new SimpleDateFormat(dateFormat); String fileName = sdf.format(cal.getTime()); return fileName; } public void sendArrayLength(int length) throws Exception { getOutput().println("SENDING ARRAY LENGTH..."); getOutput().println(length); } public void sendWidth(int width) throws Exception { getOutput().println("SENDING IMAGE WIDTH..."); getOutput().println(width); } public void sendHeight(int height) throws Exception { getOutput().println("SENDING IMAGE HEIGHT..."); getOutput().println(height); } public void sendImageData(byte[] imageData) throws Exception { getOutput().println("SENDING IMAGE..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } } public void sendImageInfo(String info) throws Exception { getOutput().println("SENDING IMAGE INFO..."); getOutput().println(info); } public void actionPerformed(ActionEvent a){ String message = null; try { if((message = getInput().readLine()).equals("PROCESSING...")) { if((message = getInput().readLine()).equals("IMAGE RECIEVED SUCCESSFULLY.")) { captureScreen(nameImage()); } } }catch(Exception e) { JOptionPane.showMessageDialog(null, "Problem: " + e); } } } SERVER: import java.awt.image.BufferedImage; import java.io.*; import java.net.*; import javax.imageio.ImageIO; /*IMPORTANT TODO: * 1. CLOSE ALL STREAMS AND SOCKETS WITHIN CLIENT AND SERVER! * 2. PLACE MAIN EXEC CODE IN A TIMED WHILE LOOP TO SEND FILE EVERY X SECONDS * */ public class ViewerServer { private ServerSocket vServer; private Socket vClient; private PrintWriter out; private BufferedReader in; private byte[] imageData; private int width; private int height; private String imageInfo; private int[] rgbData; private boolean active; public ViewerServer() throws Exception{ vServer = null; vClient = null; out = null; in = null; imageData = null; width = 0; height = 0; imageInfo = null; rgbData = null; active = true; } public void setVServer(ServerSocket vs) { vServer = vs; } public void setVClient(Socket vc) { vClient = vc; } public void setOutput(PrintWriter o) { out = o; } public void setInput(BufferedReader i) { in = i; } public void setImageData(byte[] imDat) { imageData = imDat; } public void setWidth(int w) { width = w; } public void setHeight(int h) { height = h; } public void setImageInfo(String im) { imageInfo = im; } public void setRGBData(int[] rd) { rgbData = rd; } public void setActive(boolean a) { active = a; } /***********************************************/ public ServerSocket getVServer() { return vServer; } public Socket getVClient() { return vClient; } public PrintWriter getOutput() { return out; } public BufferedReader getInput() { return in; } public byte[] getImageData() { return imageData; } public int getWidth() { return width; } public int getHeight() { return height; } public String getImageInfo() { return imageInfo; } public int[] getRGBData() { return rgbData; } public boolean getActive() { return active; } public void run() throws Exception{ connect(); setActive(true); while(getActive()) { recieve(); } close(); } public void recieve() throws Exception{ String clientStatus = null; int clientData = 0; // System.out.println("SERVER: Sending ready message..."); getOutput().println("READY"); // System.out.println("SERVER: Ready message sent."); if((clientStatus = getInput().readLine()).equals("SENDING IMAGE WIDTH...")) { setWidth(getInput().read()); System.out.println("Width: " + getWidth()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE HEIGHT...")) { setHeight(getInput().read()); System.out.println("Height: " + getHeight()); } if((clientStatus = getInput().readLine()).equals("SENDING ARRAY LENGTH...")) { clientData = getInput().read(); setImageData(new byte[clientData]); System.out.println("Array length: " + clientData); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE INFO...")) { setImageInfo(getInput().readLine()); System.out.println("Image Info: " + getImageInfo()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE...")) { for(int i = 0; i < getImageData().length; i++) { getImageData()[i] = ((byte)getInput().read()); } } if((clientStatus = getInput().readLine()).equals("FINISHED.")) { getOutput().println("PROCESSING..."); setRGBData(new int[getImageData().length]); for(int i = 0; i < getRGBData().length; i++) { getRGBData()[i] = getImageData()[i]; } BufferedImage image = null; image.setRGB(0, 0, getWidth(), getHeight(), getRGBData(), getWidth(), getHeight()); ImageIO.write(image, "png", new File(imageInfo + ".png")); //create an image file out of the screenshot getOutput().println("IMAGE RECIEVED SUCCESSFULLY."); } } public void connect() throws Exception { setVServer(new ServerSocket(4444)); //establish server connection // System.out.println("SERVER: Connection established."); setVClient(getVServer().accept()); //accept client connection request // System.out.println("SERVER: Accepted connection request."); setOutput(new PrintWriter(vClient.getOutputStream(), true)); //set up an output channel setInput(new BufferedReader(new InputStreamReader(vClient.getInputStream()))); //set up an input channel // System.out.println("SERVER: Created IO ports."); } public void close() throws Exception { getOutput().close(); getInput().close(); getVClient().close(); getVServer().close(); } }

  Read the article

• Coherence Data Guarantees for Data Reads - Basic Terminology

  - by jpurdy

  When integrating Coherence into applications, each application has its own set of requirements with respect to data integrity guarantees. Developers often describe these requirements using expressions like "avoiding dirty reads" or "making sure that updates are transactional", but we often find that even in a small group of people, there may be a wide range of opinions as to what these terms mean. This may simply be due to a lack of familiarity, but given that Coherence sits at an intersection of several (mostly) unrelated fields, it may be a matter of conflicting vocabularies (e.g. "consistency" is similar but different in transaction processing versus multi-threaded programming). Since almost all data read consistency issues are related to the concept of concurrency, it is helpful to start with a definition of that, or rather what it means for two operations to be concurrent. Rather than implying that they occur "at the same time", concurrency is a slightly weaker statement -- it simply means that it can't be proven that one event precedes (or follows) the other. As an example, in a Coherence application, if two client members mutate two different cache entries sitting on two different cache servers at roughly the same time, it is likely that one update will precede the other by a significant amount of time (say 0.1ms). However, since there is no guarantee that all four members have their clocks perfectly synchronized, and there is no way to precisely measure the time it takes to send a given message between any two members (that have differing clocks), we consider these to be concurrent operations since we can not (easily) prove otherwise. So this leads to a question that we hear quite frequently: "Are the contents of the near cache always synchronized with the underlying distributed cache?". It's easy to see that if an update on a cache server results in a message being sent to each near cache, and then that near cache being updated that there is a window where the contents are different. However, this is irrelevant, since even if the application reads directly from the distributed cache, another thread update the cache before the read is returned to the application. Even if no other member modifies a cache entry prior to the local near cache entry being updated (and subsequently read), the purpose of reading a cache entry is to do something with the result, usually either displaying for consumption by a human, or by updating the entry based on the current state of the entry. In the former case, it's clear that if the data is updated faster than a human can perceive, then there is no problem (and in many cases this can be relaxed even further). For the latter case, the application must assume that the value might potentially be updated before it has a chance to update it. This almost aways the case with read-only caches, and the solution is the traditional optimistic transaction pattern, which requires the application to explicitly state what assumptions it made about the old value of the cache entry. If the application doesn't want to bother stating those assumptions, it is free to lock the cache entry prior to reading it, ensuring that no other threads will mutate the entry, a pessimistic approach. The optimistic approach relies on what is sometimes called a "fuzzy read". In other words, the application assumes that the read should be correct, but it also acknowledges that it might not be. (I use the qualifier "sometimes" because in some writings, "fuzzy read" indicates the situation where the application actually sees an original value and then later sees an updated value within the same transaction -- however, both definitions are roughly equivalent from an application design perspective). If the read is not correct it is called a "stale read". Going back to the definition of concurrency, it may seem difficult to precisely define a stale read, but the practical way of detecting a stale read is that is will cause the encompassing transaction to roll back if it tries to update that value. The pessimistic approach relies on a "coherent read", a guarantee that the value returned is not only the same as the primary copy of that value, but also that it will remain that way. In most cases this can be used interchangeably with "repeatable read" (though that term has additional implications when used in the context of a database system). In none of cases above is it possible for the application to perform a "dirty read". A dirty read occurs when the application reads a piece of data that was never committed. In practice the only way this can occur is with multi-phase updates such as transactions, where a value may be temporarily update but then withdrawn when a transaction is rolled back. If another thread sees that value prior to the rollback, it is a dirty read. If an application uses optimistic transactions, dirty reads will merely result in a lack of forward progress (this is actually one of the main risks of dirty reads -- they can be chained and potentially cause cascading rollbacks). The concepts of dirty reads, fuzzy reads, stale reads and coherent reads are able to describe the vast majority of requirements that we see in the field. However, the important thing is to define the terms used to define requirements. A quick web search for each of the terms in this article will show multiple meanings, so I've selected what are generally the most common variations, but it never hurts to state each definition explicitly if they are critical to the success of a project (many applications have sufficiently loose requirements that precise terminology can be avoided).

  Read the article

• Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

  - by arungupta

  This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

• Data Source Security Part 1

  - by Steve Felts

  I’ve written a couple of articles on how to store data source security credentials using the Oracle wallet.  I plan to write a few articles on the various types of security available to WebLogic Server (WLS) data sources.  There are more options than you might think! There have been several enhancements in this area in WLS 10.3.6.  There are a couple of more enhancements planned for release WLS 12.1.2 that I will include here for completeness.  This isn’t intended as a teaser.  If you call your Oracle support person, you can get them now as minor patches to WLS 10.3.6.   The current security documentation is scattered in a few places, has a few incorrect statements, and is missing a few topics.  It also seems that the knowledge of how to apply some of these features isn’t written down.  The goal of these articles is to talk about WLS data source security in a unified way and to introduce some approaches to using the available features.  Introduction to WebLogic Data Source Security Options By default, you define a single database user and password for a data source.  You can store it in the data source descriptor or make use of the Oracle wallet.  This is a very simple and efficient approach to security.  All of the connections in the connection pool are owned by this user and there is no special processing when a connection is given out.  That is, it’s a homogeneous connection pool and any request can get any connection from a security perspective (there are other aspects like affinity).  Regardless of the end user of the application, all connections in the pool use the same security credentials to access the DBMS.   No additional information is needed when you get a connection because it’s all available from the data source descriptor (or wallet). java.sql.Connection conn =  mydatasource.getConnection(); Note: You can enter the password as a name-value pair in the Properties field (this not permitted for production environments) or you can enter it in the Password field of the data source descriptor. The value in the Password field overrides any password value defined in the Properties passed to the JDBC Driver when creating physical database connections. It is recommended that you use the Password attribute in place of the password property in the properties string because the Password value is encrypted in the configuration file (stored as the password-encrypted attribute in the jdbc-driver-params tag in the module file) and is hidden in the administration console.  The Properties and Password fields are located on the administration console Data Source creation wizard or Data Source Configuration tab. The JDBC API can also be used to programmatically specify a database user name and password as in the following.  java.sql.Connection conn = mydatasource.getConnection(“user”, “password”); According to the JDBC specification, it’s supposed to take a database user and associated password but different vendors implement this differently.  WLS, by default, treats this as an application server user and password.  The pair is authenticated to see if it’s a valid user and that user is used for WLS security permission checks.  By default, the user is then mapped to a database user and password using the data source credential mapper, so this API sort of follows the specification but database credentials are one-step removed from the application code.  More details and the rationale are described later. While the default approach is simple, it does mean that only one database user is doing all of the work.  You can’t figure out who actually did the update and you can’t restrict SQL operations by who is running the operation, at least at the database level.   Any type of per-user logic will need to be in the application code instead of having the database do it.  There are various WLS data source features that can be configured to provide some per-user information about the operations to the database. WebLogic Data Source Security Options This table describes the features available for WebLogic data sources to configure database security credentials and a brief description.  It also captures information about the compatibility of these features with one another. Feature Description Can be used with Can’t be used with User authentication (default) Default getConnection(user, password) behavior – validate the input and use the user/password in the descriptor. Set client identifier Proxy Session, Identity pooling, Use database credentials Use database credentials Instead of using the credential mapper, use the supplied user and password directly. Set client identifier, Proxy session, Identity pooling User authentication, Multi Data Source Set Client Identifier Set a client identifier property associated with the connection (Oracle and DB2 only). Everything Proxy Session Set a light-weight proxy user associated with the connection (Oracle-only). Set client identifier, Use database credentials Identity pooling, User authentication Identity pooling Heterogeneous pool of connections owned by specified users. Set client identifier, Use database credentials Proxy session, User authentication, Labeling, Multi-datasource, Active GridLink Note that all of these features are available with both XA and non-XA drivers. Currently, the Proxy Session and Use Database Credentials options are on the Oracle tab of the Data Source Configuration tab of the administration console (even though the Use Database Credentials feature is not just for Oracle databases – oops).  The rest of the features are on the Identity tab of the Data Source Configuration tab in the administration console (plan on seeing them all in one place in the future). The subsequent articles will describe these features in more detail.  Keep referring back to this table to see the big picture.

  Read the article

• Understanding implementation of glu.PickMatrix()

  - by stoney78us

  I am working on an OpenGL project which requires object selection feature. I use OpenTK framework to do this; however OpenTK doesn't support glu.PickMatrix() method to define the picking region. I ended up googling its implementation and here is what i got: void GluPickMatrix(double x, double y, double deltax, double deltay, int[] viewport) { if (deltax <= 0 || deltay <= 0) { return; } GL.Translate((viewport[2] - 2 * (x - viewport[0])) / deltax, (viewport[3] - 2 * (y - viewport[1])) / deltay, 0); GL.Scale(viewport[2] / deltax, viewport[3] / deltay, 1.0); } I totally fail to understand this piece of code. Moreover, this doesn't work with my following code sample: //selectbuffer private int[] _selectBuffer = new int[512]; private void Init() { float[] triangleVertices = new float[] { 0.0f, 1.0f, 0.0f, -1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 0.0f }; float[] _triangleColors = new float[] { 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 1.0f }; GL.GenBuffers(2, _vBO); GL.BindBuffer(BufferTarget.ArrayBuffer, _vBO[0]); GL.BufferData(BufferTarget.ArrayBuffer, new IntPtr(sizeof(float) * _triangleVertices.Length), _triangleVertices, BufferUsageHint.StaticDraw); GL.VertexPointer(3, VertexPointerType.Float, 0, 0); GL.BindBuffer(BufferTarget.ArrayBuffer, _vBO[1]); GL.BufferData(BufferTarget.ArrayBuffer, new IntPtr(sizeof(float) * _triangleColors.Length), _triangleColors, BufferUsageHint.StaticDraw); GL.ColorPointer(3, ColorPointerType.Float, 0, 0); GL.EnableClientState(ArrayCap.VertexArray); GL.EnableClientState(ArrayCap.ColorArray); //Selectbuffer set up GL.SelectBuffer(512, _selectBuffer); } private void glControlWindow_Paint(object sender, PaintEventArgs e) { GL.Clear(ClearBufferMask.ColorBufferBit); GL.Clear(ClearBufferMask.DepthBufferBit); float[] eyes = { 0.0f, 0.0f, -10.0f }; float[] target = { 0.0f, 0.0f, 0.0f }; Matrix4 projection = Matrix4.CreatePerspectiveFieldOfView(0.785398163f, 4.0f / 3.0f, 0.1f, 100f); //45 degree = 0.785398163 rads Matrix4 view = Matrix4.LookAt(eyes[0], eyes[1], eyes[2], target[0], target[1], target[2], 0, 1, 0); Matrix4 model = Matrix4.Identity; Matrix4 MV = view * model; //First Clear Buffers GL.Clear(ClearBufferMask.ColorBufferBit); GL.Clear(ClearBufferMask.DepthBufferBit); GL.MatrixMode(MatrixMode.Projection); GL.LoadIdentity(); GL.LoadMatrix(ref projection); GL.MatrixMode(MatrixMode.Modelview); GL.LoadIdentity(); GL.LoadMatrix(ref MV); GL.Viewport(0, 0, glControlWindow.Width, glControlWindow.Height); GL.Enable(EnableCap.DepthTest); //Enable correct Z Drawings GL.DepthFunc(DepthFunction.Less); //Enable correct Z Drawings GL.MatrixMode(MatrixMode.Modelview); GL.PushMatrix(); GL.Translate(3.0f, 0.0f, 0.0f); DrawTriangle(); GL.PopMatrix(); GL.PushMatrix(); GL.Translate(-3.0f, 0.0f, 0.0f); DrawTriangle(); GL.PopMatrix(); //Finally... GraphicsContext.CurrentContext.VSync = true; //Caps frame rate as to not over run GPU glControlWindow.SwapBuffers(); //Takes from the 'GL' and puts into control } private void DrawTriangle() { GL.BindBuffer(BufferTarget.ArrayBuffer, _vBO[0]); GL.VertexPointer(3, VertexPointerType.Float, 0, 0); GL.EnableClientState(ArrayCap.VertexArray); GL.DrawArrays(BeginMode.Triangles, 0, 3); GL.DisableClientState(ArrayCap.VertexArray); } //mouse click event implementation private void glControlWindow_MouseClick(object sender, System.Windows.Forms.MouseEventArgs e) { //Enter Select mode. Pretend drawing. GL.RenderMode(RenderingMode.Select); int[] viewport = new int[4]; GL.GetInteger(GetPName.Viewport, viewport); GL.PushMatrix(); GL.MatrixMode(MatrixMode.Projection); GL.LoadIdentity(); GluPickMatrix(e.X, e.Y, 5, 5, viewport); Matrix4 projection = Matrix4.CreatePerspectiveFieldOfView(0.785398163f, 4.0f / 3.0f, 0.1f, 100f); // this projection matrix is the same as one in glControlWindow_Paint method. GL.LoadMatrix(ref projection); GL.MatrixMode(MatrixMode.Modelview); int i = 0; int hits; GL.PushMatrix(); GL.Translate(3.0f, 0.0f, 0.0f); GL.PushName(i); DrawTriangle(); GL.PopName(); GL.PopMatrix(); i++; GL.PushMatrix(); GL.Translate(-3.0f, 0.0f, 0.0f); GL.PushName(i); DrawTriangle(); GL.PopName(); GL.PopMatrix(); hits = GL.RenderMode(RenderingMode.Render); .....hits processing code goes here... GL.PopMatrix(); glControlWindow.Invalidate(); } I expect to get only one hit everytime i click inside a triangle, but i always get 2 no matter where i click. I suspect there is something wrong with the implementation of the GluPickMatrix, I haven't figured out yet.

  Read the article

• Simple BizTalk Orchestration & Port Tutorial

  - by bosuch

  (This is a reference for a lunch & learn I'm giving at my company) This demo will create a BizTalk process that monitors a directory for an XML file, loads it into an orchestration, and drops it into a different directory. There’s no real processing going on (other than moving the file from one location to another), but this will introduce you to Messages, Orchestrations and Ports. To begin, create a new BizTalk Project names OrchestrationPortDemo: When the solution has been created, right-click the OrchestrationPortDemo solution name and select Add -> New Item. Add a BizTalk Orchestration named DemoOrchestration: Click Add and the orchestration will be created and displayed in the BizTalk Orchestration Designer. The designer allows you to visually create your business processes: Next, you will add a message (the basic unit of communication) to the orchestration. In the Orchestration View, right-click Messages and select New Message. In the message properties window, enter DemoMessage as the Identifier (the name), and select .NET Classes -> System.Xml.XmlDocument for Message Type. This indicates that we’ll be passing a standard Xml document in and out of the orchestration. Next, you will add Send and Receive shapes to the orchestration. From the toolbox, drag a Receive shape onto the orchestration (where it says “Drop a shape from the toolbox here”). Next, drag a Send shape directly below the Receive shape. For the properties of both shapes, select DemoMessage for Message – this indicates we’ll be passing around the message we created earlier. The Operation box will have a red exclamation mark next to it because no port has been specified. We will do this in a minute. On the Receive shape properties, you must be sure to select True for Activate. This indicates that the orchestration will be started upon receipt of a message, rather than being called by another orchestration. If you leave it set to false, when you try to build the application you’ll receive the error “You must specify at least one already-initialized correlation set for a non-activation receive that is on a non self-correlating port.” Now you’ll add ports to the orchestration. Ports specify how your orchestration will send and receive messages. Drag a port from the toolbox to the left-hand Port Surface, and the Port Configuration Wizard launches. For the first port (the receive port), enter the following information: Name: ReceivePort Select the port type to be used for this port: Create a new Port Type Port Type Name: ReceivePortType Port direction of communication: I’ll always be receiving <…> Port binding: Specify later By choosing “Specify later” you are choosing to bind the port (choose where and how it will send or receive its messages) at deployment time via the BizTalk Server Administration console. This allows you to change locations later without building and re-deploying the application. Next, drag a port to the right-hand Port Surface; this will be your send port. Configure it as follows: Name: SendPort Select the port type to be used for this port: Create a new Port Type Port Type Name: SendPortType Port direction of communication: I’ll always be sending <…> Port binding: Specify later Finally, drag the green arrow on the ReceivePort to the Receive_1 shape, and the green arrow on the SendPort to the Send_1 shape. Your orchestration should look like this: Now you have a couple final steps before building and deploying the application. In the Solution Explorer, right-click on OrchestrationPortDemo and select Properties. On the Signing tab, click “Sign the assembly”, and choose <New…> from the drop-down. Enter DemoKey as the Key file name, and deselect “Protect my key file with a password”. This will create the file DemoKey.snk in your solution. Signing the assembly gives it a strong name so that it can be deployed into the global assembly cache (GAC). Next, click the Deployment tab, and enter OrchestrationPortDemo as the Application Name. Save your solution. Click “Build OrchestrationPortDemo”. Your solution should (hopefully!) build with no errors. Click “Deploy OrchestrationPortDemo”. (Note – If you’re running Server 2008, Vista or Win7, you may get an error message. If so, close Visual Studio and run it as an administrator) That’s it! Your application is ready to be configured and fired up in the BizTalk Server Administration console, so stay tuned!

  Read the article

• SPARC T4 ??????: SPARC T4 ??????????!!

  - by user13138700

  ?? 2011 ? 9 ?? SPARC T4 CPU ???????? SPARC T4 ????????????????2011??10?????????????????????????? ????????????????????SPARC T4 ?????????????????????????????????????????????????????????? SPARC T4 CPU ???? SPARC T4 ?????????????????????????????????? ??????????????????????4/4, 4/5, 4/6 ? 3???????? Oracle Open World 2012 ???????? Oracle Open World 2012 Tokyo ?? Oracle ?????&????? ??? Oracle Solaris ????????????·????????? SPARC&Solaris ??????????????SPARC&Solaris ????????????????????????????????????????????????????????????????????????? Oracle OpenWorld Tokyo 2012 ???? URL http://www.oracle.com/openworld/jp-ja/index.html ?????? 7264 ??????????????? ????Oracle Open World 2012 Tokyo ?????????????????????????SPARC T4 ????? ????????????????? SPARC T4 ????????? SPARC T3 ????????(S2??)??????????????????????????(S3??)??????????????????? ???????" T " ???????????????(?)?????? SPARC T1/T2/T3 ???????????????????????????(????????)????????????????????????? ?SPARC T4 ????????????????????????????? ?SPARC T4 ???????DB?????????????????????????????? ???????????????? ????????????????????????????????????????????? ???? SPARC T3 ???????????????????????????2???????????? ????????????????????????????????????????????????????? ?????????????? SPARC T4 ????????????????????????????????????SPARC T4 ????????? SPARC T4 ??????????????????????????????????????????? ?????????????? T4 ??????????????????? SPARC ???????????????????????????????????????????????????????????????????&??????????? ?????????????????????????????????????????????????????????Web?????????????DB?????????????????????????????????????? (????????????) ???????????? SPARC T4 ????????????????????????????? < T4 ???????? > ??? SPARC ??(S3??)??? x5??????????????????? x2????????????????????? Crypto (?????)?????????? ?????????????????????????/???????????????? ?????? 1, 2,& 4 ??????????? < T4 ????? ??????? > 8x SPARC S3 ?? (64????/???) 4MB ?? L3 ????? (8???/16???) 8x9 ????? 4x DDR3 ??????????? @6.4Gbps 6x ?????????? @9.6Gbps 2x8 PCIe 2.0 (5GTS) 2x10Gb XAUI ??????? < S3???????????? > ALU : Arithmetic Logic Unit BRU : Branch Logic Unit FGU : Flouting-point Graphics Unit IRF : Integer Register File FRF : Flouting-point Register File WRF : Working Register File MMU : Memory Management Unit LSU : Load Store Unit Crypto(SPU) : Streaming Processing Unit TRU : Trap Logic Unit < S3????????? > ????? 8????/?? ?????? Out-of-Order ?? 16???????????????? ????????????? ???????????? ??????? ????????? 64???? ITLB ? 128???? DTLB 64KB 4??? L1 ?????????????? 128KB 8??? ???? L2 ????? < T4 ???????? vs T3 ???????? > T4 ????????????? Out-Of-Order ???? Pick ???????? In-Order ?? Pick ?????? Commit ??????? Out-Of-Order ?? Commit ?????? In-Order ?? < T4 ?????????? > ???????????vs????????????????????????????? ????????Active??????????????????? ???????????????????????? ??????????????????? < T4vsT1/T2/T3 ??????? > SPARC T4 ???? T3????????Web??????????? DB?????????????????????????????? ????????????????????SPARC T4 ?????&Solaris ?????????????(????????)??????????????????????????????????????????????????????????!!? ????Oracle Open World 2012 Tokyo ????????????????SPARC T4 ?????????????????????? 4/4, 4/5, 4/6 ?3????????????????????????????????????????????????????????????????????????????????????? ????????????????? URL http://www.oracle.com/openworld/jp-ja/exhibit/index.html

  Read the article

• Websphere federated repository for Active Directory

  - by Drakiula

  Hi, What I am trying to achieve is to have Websphere 6.1 use Active Directory users authentication. Websphere is running on Windows 2008 R2. What I've done already: Succesfully setup a federated repository for Windows Active Directory (LDAP); Create a realm definition for the federated repository previously defined; Set the realm definition as the current real definition. Stop the Websphere service. When I attempt to start the Websphere service again, it crashes with the following stacktrace: ------Start of DE processing------ = [9/3/10 2:36:14:133 PDT] , key = com.ibm.websphere.security.EntryNotFoundException com.ibm.ws.security.registry.UserRegistryImpl.createCredential 824 Exception = com.ibm.websphere.security.EntryNotFoundException Source = com.ibm.ws.security.registry.UserRegistryImpl.createCredential probeid = 824 Stack Dump = com.ibm.websphere.wim.exception.EntityNotFoundException: CWWIM4001E The 'null' entity was not found. at com.ibm.ws.wim.registry.util.UniqueIdBridge.getUniqueUserId(UniqueIdBridge.java:233) at com.ibm.ws.wim.registry.WIMUserRegistry$6.run(WIMUserRegistry.java:351) at com.ibm.ws.wim.security.authz.jacc.JACCSecurityManager.runAsSuperUser(JACCSecurityManager.java:500) at com.ibm.ws.wim.security.authz.ProfileSecurityManager.runAsSuperUser(ProfileSecurityManager.java:964) at com.ibm.ws.wim.registry.WIMUserRegistry.getUniqueUserId(WIMUserRegistry.java:340) at com.ibm.ws.security.registry.UserRegistryImpl.createCredential(UserRegistryImpl.java:750) at com.ibm.ws.security.ltpa.LTPAServerObject.authenticate(LTPAServerObject.java:776) at com.ibm.ws.security.server.lm.ltpaLoginModule.login(ltpaLoginModule.java:453) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at javax.security.auth.login.LoginContext.invoke(LoginContext.java:795) at javax.security.auth.login.LoginContext.access$000(LoginContext.java:209) at javax.security.auth.login.LoginContext$4.run(LoginContext.java:709) at java.security.AccessController.doPrivileged(AccessController.java:246) at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:706) at javax.security.auth.login.LoginContext.login(LoginContext.java:603) at com.ibm.ws.security.auth.JaasLoginHelper.jaas_login(JaasLoginHelper.java:376) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3513) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3306) at com.ibm.ws.security.auth.ContextManagerImpl.login(ContextManagerImpl.java:3086) at com.ibm.ws.security.auth.ContextManagerImpl.getServerSubjectInternal(ContextManagerImpl.java:2180) at com.ibm.ws.security.auth.ContextManagerImpl.getServerSubjectInternal(ContextManagerImpl.java:1972) at com.ibm.ws.security.auth.ContextManagerImpl.initialize(ContextManagerImpl.java:2530) at com.ibm.ws.security.auth.ContextManagerImpl.initialize(ContextManagerImpl.java:2560) at com.ibm.ws.security.core.SecurityContext.enable(SecurityContext.java:83) at com.ibm.ws.security.core.distSecurityComponentImpl.initialize(distSecurityComponentImpl.java:379) at com.ibm.ws.security.core.distSecurityComponentImpl.startSecurity(distSecurityComponentImpl.java:336) at com.ibm.ws.security.core.SecurityComponentImpl.startSecurity(SecurityComponentImpl.java:105) at com.ibm.ws.security.core.ServerSecurityComponentImpl.start(ServerSecurityComponentImpl.java:283) at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:977) at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:673) at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:197) at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:977) at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:673) at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:526) at com.ibm.ws.runtime.WsServerImpl.bootServerContainer(WsServerImpl.java:192) at com.ibm.ws.runtime.WsServerImpl.start(WsServerImpl.java:140) at com.ibm.ws.runtime.WsServerImpl.main(WsServerImpl.java:461) at com.ibm.ws.runtime.WsServer.main(WsServer.java:59) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at com.ibm.wsspi.bootstrap.WSLauncher.launchMain(WSLauncher.java:183) at com.ibm.wsspi.bootstrap.WSLauncher.main(WSLauncher.java:90) at com.ibm.wsspi.bootstrap.WSLauncher.run(WSLauncher.java:72) at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:618) at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336) at org.eclipse.core.launcher.Main.basicRun(Main.java:280) at org.eclipse.core.launcher.Main.run(Main.java:977) at com.ibm.wsspi.bootstrap.WSPreLauncher.launchEclipse(WSPreLauncher.java:329) at com.ibm.wsspi.bootstrap.WSPreLauncher.main(WSPreLauncher.java:92) Dump of callerThis = Object type = com.ibm.ws.security.registry.UserRegistryImpl com.ibm.ws.security.registry.UserRegistryImpl@68a068a0 Anybody maybe has a hint on this? I followed the exact steps described in the IBM Infocenter for setting this up. Thanks in advance for the help.

  Read the article

• Error installing pkgconfig via macports

  - by Greg K

  I installed Macports 1.8.2 from a DMG. That seemed to install fine. I ran sudo port selfupdate to make sure my ports tree was current. I then tried to install bindfs as I want to mount some directories in my OS X file system (like you can do with mount --bind in linux). pkgconfig and macfuse are two dependencies of bindfs. I had trouble installing bindfs due to errors installing pkgconfig, so I tried to just install pkgconfig, here's the debug output from sudo port install pkgconfig: $ sudo port -d install pkgconfig DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. ---> Computing dependencies for pkgconfig DEBUG: Executing org.macports.main (pkgconfig) DEBUG: Skipping completed org.macports.fetch (pkgconfig) DEBUG: Skipping completed org.macports.checksum (pkgconfig) DEBUG: Skipping completed org.macports.extract (pkgconfig) DEBUG: Skipping completed org.macports.patch (pkgconfig) ---> Configuring pkgconfig DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (pkgconfig) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... none checking for gcc... /usr/bin/gcc-4.2 checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I have only recently installed Xcode 3.2.2 (prior to installing macports). Am I right in thinking this the issue here: configure: error: C compiler cannot create executables

  Read the article

• Squid refresh_pattern won't cache "Expires: ..."

  - by Marcelo Cantos

  Background I frequent the OpenGL ES documentation site at http://www.khronos.org/opengles/sdk/1.1/docs/man/. Even though the content is completely static, it seems to force a reload on every single page I visit, which is very annoying. I have a squid 3.0 proxy set up (apt-get install squid3 on Ubuntu 10.04), and I added a refresh_pattern to force the pages to cache: refresh_pattern ^http://www.khronos.org/opengles/sdk/1\.1/docs/man/ … 1440 20% 10080 … override-expire ignore-reload ignore-no-cache ignore-private ignore-no-store This is all on one line, of course. While this appears to work for the XHTML documents (e.g., glBindTexture), it fails to cache the linked content, such as the DTD, some .ent files (?) and some XSL files. The delay in fetching these extra files delays rendering of the main document, so my principal annoyance isn't fixed. The only difference I can glean with these ancillary files is that they come with an Expires: header set to the current time, whereas the XHTML document has none. But I would have expected the override-expire option to fix this. I have confirmed that documents have the same base URL. I have also truncated the pattern to varying degrees, with no effect. My questions Why does the override-expire option not seem to work? Is there a simple way to tell squid to unconditionally cache a document, no matter what it finds in the response headers? (Hopefully) relevant output cache.log Jan 01 10:33:30 1970/06/25 21:18:27| Processing Configuration File: /etc/squid3/squid.conf (depth 0) Jan 01 10:33:30 1970/06/25 21:18:27| WARNING: use of 'override-expire' in 'refresh_pattern' violates HTTP Jan 01 10:33:30 1970/06/25 21:18:27| WARNING: use of 'ignore-reload' in 'refresh_pattern' violates HTTP Jan 01 10:33:30 1970/06/25 21:18:27| WARNING: use of 'ignore-no-cache' in 'refresh_pattern' violates HTTP Jan 01 10:33:30 1970/06/25 21:18:27| WARNING: use of 'ignore-no-store' in 'refresh_pattern' violates HTTP Jan 01 10:33:30 1970/06/25 21:18:27| WARNING: use of 'ignore-private' in 'refresh_pattern' violates HTTP Jan 01 10:33:30 1970/06/25 21:18:27| DNS Socket created at 0.0.0.0, port 37082, FD 10 Jan 01 10:33:30 1970/06/25 21:18:27| Adding nameserver 192.168.1.1 from /etc/resolv.conf Jan 01 10:33:30 1970/06/25 21:18:27| Accepting HTTP connections at 0.0.0.0, port 3128, FD 11. Jan 01 10:33:30 1970/06/25 21:18:27| Accepting ICP messages at 0.0.0.0, port 3130, FD 13. Jan 01 10:33:30 1970/06/25 21:18:27| HTCP Disabled. Jan 01 10:33:30 1970/06/25 21:18:27| Loaded Icons. Jan 01 10:33:30 1970/06/25 21:18:27| Ready to serve requests. access.log Jun 25 21:19:35 2010.710 0 192.168.1.50 TCP_MEM_HIT/200 2452 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/glBindTexture.xml - NONE/- text/xml Jun 25 21:19:36 2010.263 543 192.168.1.50 TCP_MISS/304 322 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml1-transitional.dtd - DIRECT/74.54.224.215 - Jun 25 21:19:36 2010.276 556 192.168.1.50 TCP_MISS/304 370 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/mathml.xsl - DIRECT/74.54.224.215 - Jun 25 21:19:36 2010.666 278 192.168.1.50 TCP_MISS/304 322 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-lat1.ent - DIRECT/74.54.224.215 - Jun 25 21:19:36 2010.958 279 192.168.1.50 TCP_MISS/304 322 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-symbol.ent - DIRECT/74.54.224.215 - Jun 25 21:19:37 2010.251 276 192.168.1.50 TCP_MISS/304 322 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-special.ent - DIRECT/74.54.224.215 - Jun 25 21:19:37 2010.332 0 192.168.1.50 TCP_IMS_HIT/304 316 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/ctop.xsl - NONE/- text/xml Jun 25 21:19:37 2010.332 0 192.168.1.50 TCP_IMS_HIT/304 316 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/pmathml.xsl - NONE/- text/xml store.log Jun 25 21:19:36 2010.263 RELEASE -1 FFFFFFFF D3056C09B42659631A65A08F97794E45 304 1277464776 -1 1277464776 unknown -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml1-transitional.dtd Jun 25 21:19:36 2010.276 RELEASE -1 FFFFFFFF 9BF7F37442FD84DD0AC0479E38329E3C 304 1277464776 -1 1277464776 unknown -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/mathml.xsl Jun 25 21:19:36 2010.666 RELEASE -1 FFFFFFFF 7BCFCE88EC91578C8E2589CB6310B3A1 304 1277464776 -1 1277464776 unknown -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-lat1.ent Jun 25 21:19:36 2010.958 RELEASE -1 FFFFFFFF ECF1B24E437CFAA08A2785AA31A042A0 304 1277464777 -1 1277464777 unknown -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-symbol.ent Jun 25 21:19:37 2010.251 RELEASE -1 FFFFFFFF 36FE3D76C80F0106E6E9F3B7DCE924FA 304 1277464777 -1 1277464777 unknown -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/xhtml-special.ent Jun 25 21:19:37 2010.332 RELEASE -1 FFFFFFFF A33E5A5CCA2BFA059C0FA25163485192 304 1277462871 1221139523 1277462871 text/xml -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/ctop.xsl Jun 25 21:19:37 2010.332 RELEASE -1 FFFFFFFF E2CF8854443275755915346052ACE14E 304 1277462872 1221139523 1277462872 text/xml -1/0 GET http://www.khronos.org/opengles/sdk/1.1/docs/man/pmathml.xsl

  Read the article

• Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

  - by digitaltoast

  I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

  Read the article

• Nginx + PHP-FPM = "Random" 502 Bad Gateway

  - by david

  I am running Nginx and proxying php requests via FastCGI to PHP-FPM for processing. I will randomly receive 502 Bad Gateway error pages - I can reproduce this issue by clicking around my PHP websites very rapidly/refreshing a page for a minute or two. When I get the 502 error page all I have to do is refresh the browser and the page refreshes properly. Here is my setup: nginx/0.7.64 PHP 5.3.2 (fpm-fcgi) (built: Apr 1 2010 06:42:04) Ubuntu 9.10 (Latest 2.6 Paravirt) I compiled PHP-FPM using this ./configure directive ./configure --enable-fpm --sysconfdir=/etc/php5/conf.d --with-config-file-path=/etc/php5/conf.d/php.ini --with-zlib --with-openssl --enable-zip --enable-exif --enable-ftp --enable-mbstring --enable-mbregex --enable-soap --enable-sockets --disable-cgi --with-curl --with-curlwrappers --with-gd --with-mcrypt --enable-memcache --with-mhash --with-jpeg-dir=/usr/local/lib --with-mysql=/usr/bin/mysql --with-mysqli=/usr/bin/mysql_config --enable-pdo --with-pdo-mysql=/usr/bin/mysql --with-pdo-sqlite --with-pspell --with-snmp --with-sqlite --with-tidy --with-xmlrpc --with-xsl My php-fpm.conf looks like this (the relevant parts): ... <value name="pm"> <value name="max_children">3</value> ... <value name="request_terminate_timeout">60s</value> <value name="request_slowlog_timeout">30s</value> <value name="slowlog">/var/log/php-fpm.log.slow</value> <value name="rlimit_files">1024</value> <value name="rlimit_core">0</value> <value name="chroot"></value> <value name="chdir"></value> <value name="catch_workers_output">yes</value> <value name="max_requests">500</value> ... I've tried increasing the max_children to 10 and it makes no difference. I've also tried setting it to 'dynamic' and setting max_children to 50, and start_server to '5' without any difference. I have tried using both 1 and 5 nginx worker processes. My fastcgi_params conf looks like: fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; Nginx logs the error as: [error] 3947#0: *10530 connect() failed (111: Connection refused) while connecting to upstream, client: 68.40.xxx.xxx, server: www.domain.com, request: "GET /favicon.ico HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.domain.com" PHP-FPM logs the follow at the time of the error: [NOTICE] pid 17161, fpm_unix_init_main(), line 255: getrlimit(nofile): max:1024, cur:1024 [NOTICE] pid 17161, fpm_event_init_main(), line 93: libevent: using epoll [NOTICE] pid 17161, fpm_init(), line 50: fpm is running, pid 17161 [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17162 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17163 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17164 started [NOTICE] pid 17161, fpm_event_loop(), line 111: ready to handle connections My CPU usage maxes out around 10-15% when I recreate the issue. My Free mem (free -m) is 130MB I had this intermittent 502 Bad Gateway issue when in was using php5-cgi to service my php requests as well. Does anyone know how to fix this?

  Read the article

• How to publish an ASP.NET MVC application to a free host

  - by Lirik

  Hi, I'm using a free web host (0000free) which supports ASP.NET MVC, but it uses Mono. This is the first time I deploy an MVC application, so I'm a little confused as to where I need to deploy it. I have Visual Studio 2010 and I used its Publish Feature (i.e. right click on the project name and click publish) and I tried several things: Publish method: FTP to the root folder. Publish method: FTP to the publich_html folder. Publish method: File System to the root folder. Publish method: File System to the publich_html folder. Publish method: File System to a local directory on my computer and then FTP to root and also tried the public_html folder. I went into the cPanel (control panel) to try and see if ASP.NET has to be added/enabled for my web site, but I didn't see anything there. I can't browse to Index.aspx nor can I redirect to it from index.html (as suggested from other posts on the host forum), right now I have a link from index.html to Index.aspx but it's not working either (see http://www.mydevarmy.com) I've also tried renaming Index.aspx to Default.aspx, but that doesn't work either. The search utility of the forum of the host is somewhat weak, so I use google to search their forum: http://www.google.com/search?q=publish+asp.net+site%3A0000free.com%2Fforum%2F&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a I've been reading Pro ASP.NET MVC Framework and they have a chapter about publishing, but it doesn't provide any specific information with respect to the location of publishing, this is all they say (and it's not very helpful in my case): Where Should I Put My Application? You can deploy your application to any folder on the server. When IIS first installs, it automatically creates a folder for a web site called Default Web Site at c:\Inetpub\wwwroot\, but you shouldn’t feel any obligation to put your application files there. It’s very common to host applications on a different physical drive from the operating system (e.g., in e:\websites\ example.com). It’s entirely up to you, and may be influenced by concerns such as how you plan to back up the server. Here is the exception I get when I try to view my Index.aspx page: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) Description: HTTP 500. Error processing request. Stack Trace: System.Configuration.ConfigurationErrorsException: Unrecognized attribute 'targetFramework'. (/home/devarmy/public_html/Web.config line 1) at System.Configuration.ConfigurationElement.DeserializeElement (System.Xml.XmlReader reader, Boolean serializeCollectionKey) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DoDeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSection.DeserializeSection (System.Xml.XmlReader reader) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSectionInstance (System.Configuration.SectionInfo config, Boolean createDefaultInstance) [0x00000] in <filename unknown>:0 at System.Configuration.ConfigurationSectionCollection.get_Item (System.String name) [0x00000] in <filename unknown>:0 at System.Configuration.Configuration.GetSection (System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path, System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetSection (System.String sectionName, System.String path) [0x00000] in <filename unknown>:0 at System.Web.Configuration.WebConfigurationManager.GetWebApplicationSection (System.String sectionName) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.get_CompilationConfig () [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.Build (System.Web.VirtualPath vp) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.Web.VirtualPath virtualPath) [0x00000] in <filename unknown>:0 at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] in <filename unknown>:0 at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] in <filename unknown>:0

  Read the article

• Blank black screen with cursor after login -- RHEL5

  - by Sean O.

  I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

  - by Fantomas

  Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

  Read the article

• Why is IIS Anonymous authentication being used with administrative UNC drive access?

  - by Mark Lindell

  My account is local administrator on my machine. If I try to browse to a non-existent drive letter on my own box using a UNC path name: \mymachine\x$ my account would get locked out. I would also get the following warning (Event ID 100, Type “Warning”) 5 times under the “System” group in Event Viewer on my box: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: Logon failure: unknown user name or bad password. I would also get the following warning 3 times: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: The referenced account is currently locked out and may not be logged on to. On the domain controller, Event ID 680 of type “Failure Audit” would appear 4 times under the “Security” group in Event Viewer: Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: myaccount Followed by Event ID 644: User Account Locked Out: Target Account Name: myaccount Target Account ID: OURDOMAIN\myaccount Caller Machine Name: MYMACHINE Caller User Name: STAN$ Caller Domain: OURDOMAIN Caller Logon ID: (0x0,0x3E7) Followed by another 4 errors having Event ID 680. Strangely, every time I tried to browse to the UNC path I would be prompted for a user name and password, the above errors would be written to the log, and my account would be locked out. When I hit “Cancel” in response to the user name/password prompt, the following message box would display: Windows cannot find \mymachine\x$. Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search. I checked with others in the group using XP and they only got the above message box when browsing to a “bad” drive letter on their box. No one else was prompted for a user name/password and then locked out. So, every time I tried to browse to the “bad” drive letter, behind the scenes XP was trying to login 8 times using bad credentials (or, at least a bad password as the login was correct), causing my account to get locked out on the 4th try. Interestingly, If I tried browsing to a “good” drive such as “c$” it would work fine. As a test, I tried logging on to my box as a different login and browsing the “bad” UNC path. Strangely, my “ourdomain\myaccount” account was getting locked out – not the one I was logged in as! I was totally confused as to why the credentials for the other login were being passed. After much Googling, I found a link referring to some IIS settings I was vaguely familiar with from the past but could not see how they would affect this issue. It was related to the IIS directory security setting “Anonymous access and authentication control” located under: Control Panel/Administrative Tools/Computer Management/Services and Applications/Internet Information Services/Web Sites/Default Web Site/Properties/Directory Security/Anonymous access and authentication control/Edit/Password I found no indication while scouring the Internet that this property was related to my UNC problem. But, I did notice that this property was set to my domain user name and password. And, my password did age recently but I had not reset the password accordingly for this property. Sure enough, keying in the new password corrected the problem. I was no longer prompted for a user name/password when browsing the UNC path and the account lock-outs ceased. Now, a couple of questions: Why would an IIS setting affect the browsing of a UNC path on a local box? Why had I not encountered this problem before? My password has aged several times and I’ve never encountered this problem. And, I can’t remember the last time I updated the “Anonymous access” IIS password it’s been so long. I’ve run the script after a password reset before and never had my account locked-out due to the UNC problem (the script accesses UNC paths as a normal part of its processing). Windows Update did install “Cumulative Security Update for Internet Explorer 7 for Windows XP (KB972260)” on my box on 7/29/2009. I wonder if this is responsible.

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >