Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 218/715 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• My Reference for Amy Lewis

  - by Denise McInerney

  The 2013 election campaign for the PASS Board of Directors is underway. There are seven qualified candidates running this year. They all offer a wealth of experience volunteering for PASS and the SQL Server community. One of these candidates, Amy Lewis, asked me to write a reference for her to include on her candidate application. I have a lot of experience working with Amy and was pleased to provide this reference: I enthusiastically support Amy Lewis as a candidate for the PASS Board of Directors. I have known and worked with Amy in various PASS' volunteer capacities for years, starting when we were both leaders of SIGs (the precursors to the Virtual Chapters.) In that time I have seen Amy grow as a leader, taking on increasing responsibility and developing her leadership skills in the process. From the Program Committee to the BI Virtual Chapter to her local user group's SQL Saturday Amy has demonstrated a capacity to organize and lead volunteers. A successful leader delivers results, and does so in a way that encourages and empowers the people she is working with; Amy embodies this leadership style. As Director for Virtual Chapters I have most recently worked with Amy in her capacity of DW/BI VC Leader. This VC is one of our largest and most active, and Amy's leadership is a key contribution to that success. I was pleased to see that Amy was also thinking about succession and prepared other volunteers to take over the chapter leadership. Amy has shown an understanding of PASS' strategic goals and has focused her volunteer efforts to help us reach those goals. For the past couple of years we have been trying to expand PASS reach and relevance to SQL communities around the world. The VCs are a key vehicle for this expansion. Amy embraced this idea and organized the VC to engage volunteers in Europe & Australia and provide content that could reach SQL professionals in those regions. A second key strategy for PASS is expanding into the data analytics space. Again Amy rose to the occasion helping to shape the program for our first Business Analytics Conference and leveraging the BI VC to promote the event. By all measures I think Amy is prepared to serve on the Board and contribute in a positive way.

  Read the article

• Using ext4 in VMware machine

  First of all, using a journaling filesystems like NTFS, ext4, XFS, or JFS (not to name all of them) is a very good idea and nowadays unthinkable not to do. Linux offers a good variety of different option as journaling filesystem for your system. Since years I am using SGI's XFS and I am pretty confident with stability, performance and liability of the system. In earlier years I had to struggle with incompatibilities between XFS and the boot loader. Using an ext2 formatted /boot solved this issue. But, wow, that is ages ago! Lately, I had to setup a fresh Lucid Lynx (Ubuntu 10.04 LTS) system for a change of our internal groupware / messaging system. Therefore, I fired up a new virtual machine with almost standard configuration in VMware Server and run through our network-based PXE boot and installation procedure. At a certain step in this process, Ubuntu asks you about the partitioning of your hard drive(s). Honestly, I have to say that only out of curiousity I sticked to the "default" suggestion and gave my faith and trust into the Ubuntu installation routine... Resulting to have an ext4 based root mount point ( / ). The rest of the installation went on without further concerns or worries. Note:I really can't remember why I chose to go away from my favourite... Well, it should turn out to be the wrong decision after all. Ok, let's continue the story about ext4 in a VMware based virtual machine. After some hours installing additional packages and configuring the new system using LDAP for general authentication and login, I had an "out-of-the-box" usable enterprise messaging system based on Zarafa 6.40 Community Edition inclusive proper SSL-based Webaccess interface and Z-Push extension for ActiveSync with my Nokia mobile. Straightforward and pretty nice for the time spent on the setup. Having priority on other tasks I let the system just running and didn't pay any further attention at all. Until I run into an upgrade of "Mail for Exchange" on Symbian OS. My mobile did not bother me at all with the upgrade and everything went smooth, but trying to re-establish the ActiveSync connection to the Zarafa messaging system resulted in a frustating situation. So, I shifted my focus back to the Linux system and I was amazed to figure out that the root had been remounted readonly due to hard drive failures or at least ext4 reported errors. Firing up Google only confirmed my concerns and it seems that using ext4 for VMware based virtual machines does not look like a stable and reliable candidate to me. You might consider reading those external resources: ext4 fs corruption under VMWare Server 2.01Bug #389555 - ext4 filesystem corruption Well, I learned my lesson and ext{2|3|4} based filesystems are not going to be used on any of my Linux systems or customer installations in the future. Addendum: I did not try this setup in other virtualization environments like VirtualBox, qemu, kvm, Xen, etc.

  Read the article

• How to allow remote connections to Flask?

  - by Ilya Smagin

  Inside the system, running on virtual machine, I can access the running server at 127.0.0.1:5000. Although the 'remote' address of the vm is 192.168.56.101 (ping and ssh work fine), I cannot access the server with 192.168.50.101:5000 neither from the virtual machine nor from the local one. I guess there's something preventing remote connections. Here's /etc/network/interfaces: auto eth1 iface eth1 inet static address 192.168.56.101 netmask 255.255.255.0 ufw is inactive. How do I fix this problem?

  Read the article

• 3D engine for an online city/country simulation game (SimCity, Civilization)

  - by Dmitri

  I want to create a browser game, in which the user can control the development of a certain region (like SimCity or Civilization). One part of the task is rendering of the virtual world in a browser (3D or pseudo-3D). The rendering engine should a) work in a browser and b) ideally - be compatible with mobile devices (i. e. the representation of the virtual world should be visible both on desktop computer and mobile devices with the same codebase). Question: Which rendering engines (for SimCity-style games) fulfill aforementioned requirements (open and closed source) ?

  Read the article

• How to Tell If Your Computer is Overheating and What to Do About It

  - by Chris Hoffman

  Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

  Read the article

• Volume widget issue with sound card hotplugging

  - by jpic

  When plugging a USB sound card may sometimes cause the current audio output (ie. Banshee and PC speakers) to switch immediately. But the volume controls (sound widget in systray, volume keyboard keys) are stuck on the old sound card. Plug a soundcard and amplifier while the volume is set to ultra high for the pc speakers. You can't control the volume without opening the sound settings or alsamixer. This could probably cause neighbour disturbance in some countries. You can't control it with the sound widget of the systray nor the volume keyboard keys. How to disable auto switch of hardware audio output, or enable auto switch of software volume controls ? It would be great to make the software behaviour consistent with the hardware's. Ubuntu 11.10 vanilla up to date.

  Read the article

• Dropbox Doubling the Storage of Their Pro Accounts Tonight Free of Charge

  - by Jason Fitzpatrick

  If you’re a Dropbox Pro user (or have been contemplating getting a Dropbox Pro account) today is your lucky day. Dropbox has overhauled their pricing structure, effectively doubling the storage capacity of their Pro account with nary a price increase in sight. Starting later today (keep an eye on the Dropbox Plans page for the change) the Pro 50GB and 100GB plans will shift to Pro 100GB and 200GB plans, doubling the amount of storage users enjoy without an increase in price. Hit up the link below for more info. New Dropbox Plans! [The Dropbox Blog] How to Play Classic Arcade Games On Your PC How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8

  Read the article

• How can I set the default page for an https request?

  - by Rachel

  We have a website which has a Virtual Directory containing the secure portion of the website. If users come to http://www.mydomain.com, they should get directed to default.aspx of the main site, but if they go to https://www.mydomain.com, they should go to default.aspx of the virtual directory. The default page for the main site works fine, however I can't figure out how to set the default page for https traffic. Right now going to https://www.mydomain.com simply gives me a Page Not Found error. How can I set this up in IIS on Windows Server 2003?

  Read the article

• Ubuntu and VirtualBox

  - by Sinan

  I have the following configuration, A host running Windows 7; A guest running Ubuntu 14.04 LTS (VirtualBox); I am connecting a Cisco router directly to my PC running Windows 7 and testing the router for netflow packets in the virtualBox I am having a difficulty capturing the traffic of the netflow from the Cisco device in my virtualBox using port 2222. I tried to use the many different networking modes provided by virutalBox (i.e. NAT, Bridged Adapter, Host only adapter) but I am not successful in capturing the netflow traffic. Could you please advise me on the configuration setup that need to be done on the virtual box to allow capturing the traffic coming from the router. I successfully capture the netflow traffic on my PC (windows 7). Thank you

  Read the article

• IRM and Consumerization

  - by martin.abrahams

  As the season of rampant consumerism draws to its official close on 12th Night, it seems a fitting time to discuss consumerization - whereby technologies from the consumer market, such as the Android and iPad, are adopted by business organizations. I expect many of you will have received a shiny new mobile gadget for Christmas - and will be expecting to use it for work as well as leisure in 2011. In my case, I'm just getting to grips with my first Android phone. This trend developed so much during 2010 that a number of my customers have officially changed their stance on consumer devices - accepting consumerization as something to embrace rather than resist. Clearly, consumerization has significant implications for information control, as corporate data is distributed to consumer devices whether the organization is aware of it or not. I daresay that some DLP solutions can limit distribution to some extent, but this creates a conflict between accepting consumerization and frustrating it. So what does Oracle IRM have to offer the consumerized enterprise? First and foremost, consumerization does not automatically represent great additional risk - if an enterprise seals its sensitive information. Sealed files are encrypted, and that fundamental protection is not affected by copying files to consumer devices. A device might be lost or stolen, and the user might not think to report the loss of a personally owned device, but the data and the enterprise that owns it are protected. Indeed, the consumerization trend is another strong reason for enterprises to deploy IRM - to protect against this expansion of channels by which data might be accidentally exposed. It also enables encryption requirements to be met even though the enterprise does not own the device and cannot enforce device encryption. Moving on to the usage of sealed content on such devices, some of our customers are using virtual desktop solutions such that, in truth, the sealed content is being opened and used on a PC in the normal way, and the user is simply using their device for display purposes. This has several advantages: The sensitive documents are not actually on the devices, so device loss and theft are even less of a worry The enterprise has another layer of control over how and where content is used, as access to the virtual solution involves another layer of authentication and authorization - defence in depth It is a generic solution that means the enterprise does not need to actively support the ever expanding variety of consumer devices - the enterprise just manages some virtual access to traditional systems using something like Citrix or Remote Desktop services. It is a tried and tested way of accessing sealed documents. People have being using Oracle IRM in conjunction with Citrix and Remote Desktop for several years. For some scenarios, we also have the "IRM wrapper" option that provides a simple app for sealing and unsealing content on a range of operating systems. We are busy working on other ways to support the explosion of consumer devices, but this blog is not a proper forum for talking about them at this time. If you are an Oracle IRM customer, we will be pleased to discuss our plans and your requirements with you directly on request. You can be sure that the blog will cover the new capabilities as soon as possible.

  Read the article

• Exalogic Echo release available by Qualogy

  - by JuergenKress

  Just a quick post : there are new Exalogic goodies on Oracle E-Delivery today. Something we have been eagerly waiting for since the spring. Exalogic Stack version 2.0.6.0.0 (dubbed “Echo release”) is now available for download on E-Delivery (as demonstrated in the screenprints below). This is the third release of the “Exalogic virtual datacenter stack”. When more information is published about feature additions, improvements and bugfixes in this new release of the Exalogic virtual datacenter I will let you know! Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Exalogic,Qualogy,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• McAfee Total Protection

  McAfee's next generation comprehensive Internet security solution provides 12-in-1 prevention and protection for your PC

  Read the article

• DOAG 2012 and Educause 2012

  - by Chris Kawalek

  Oracle understands the value of desktop virtualization and how customers have really embraced it as a top tier method to deliver access to applications and data. Just as supporting operating systems other than Windows in the enterprise desktop space started to become necessary perhaps 5-7 years ago, supporting desktop virtualization with VDI, application virtualization, thin clients, and tablet access is becoming necessary today in 2012. Any application strategy needs to have a secure mobile component, and a solution that gives you a holistic strategy across both mobile and fixed-asset (i.e., desktop PCs) devices is crucial to success. This means it's probably useful to learn about desktop virtualization, even if it's not in your typical area of responsibility. A good way to do that is at one of the many trade shows where we exhibit. Here are two examples:  DOAG 2012 Conference + Exhibition The DOAG Conference is fast approaching, starting November 20th in Nuremberg, Germany. If you've been reading this blog for a while, you might remember that we attended last year as well. This conference is fantastic for us because we get to speak directly to users of Oracle products. In many cases, those DBAs, IT managers, and other infrastructure folks are looking for ways to deal with the burgeoning BYOD model, as well as ways of streamlining their standard desktop and access technologies. We have a couple of sessions where you can learn a great deal about how Oracle can help with these points. Session Schedule (look under "Infrastruktur & Hardware") The two sessions focused on desktop virtualization are: Oracle VDI Best Practice unter Linux (Oracle VDI Best Practice Under Linux) Virtual Desktop Infrastructure Implementierungen und Praxiserfahrungen (Virtual Desktop Infrastructures Implementations and Best Practices) We will also have experts on hand at the booth to answer your questions on using desktop virtualization. If you're at the show, please stop by and say hello to our team there! Educause 2012  Another good example is Educause. We've gone the last few years to show off a slough of education oriented applications and capabilities in the Oracle product portfolio. And every year, we display those applications through Oracle desktop virtualization. This means the demonstration can easily be setup ahead of time and replicated out to however many "demo pods" that we have available. There's no need for our product teams to setup individual laptops for demos -- we can display a standardized Windows desktop virtual machine with their apps all ready to go on a whole bunch of devices like your standard trade show laptop, our Sun Ray Clients, and iPad. Educause 2012 just wrapped, so we're sorry we missed you this year. But there is always next year! Until then, here are a few pictures from this year's show: You can also watch this video to see how Catholic Education Australia uses Oracle Secure Global Desktop to help cope with the ever changing ways that people access their applications.  -Chris 

  Read the article

• iTunes

  Buy, play, and organize audio and video content for your PC, iPod, or iPhone with Apple's free iTunes software

  Read the article

• No dual boot option, no boot priority order

  - by Atul

  I installed Ubuntu yesterday. I partitioned my C: when it was asked to give memory allocation to Ubuntu. The version is 12.04. I was able to install Ubuntu completely: Ubuntu is successfully installed. Restart you computer. I restarted and there was no Ubuntu option. Windows 7 also asked for a boot repair. So I did that too. I then wanted to change my boot priority order to Ubuntu but couldn't find it in BIOS section. I allotted 20GB to Ubuntu and it is deducted from C: but I couldn't see the partitioned drive in Windows 7. Wubi was working fine before on PC with dual boot option. I used Linux Live key creator to boot my PC through pen drive.

  Read the article

• It's noisy in ubuntu,why?

  - by Jinx

  I just installed an ubuntu on my pc(Dell Inspiration I560SR-358, with CPU E5700 3GHz, 4G memory, and NVIDIA GeForce G310). The pc becomes noisy before that it's quiet with a windows 7 on it. How come? How to set it to be quiet again in unbuntu 10.04. One of the two cpu usage is always 100%. I think that is the reason. //re-edit Everything gets ok after I restart the computer.But the fan is still running which makes it noisy, if i switch to windows 7, it becomes quiet again.

  Read the article

• Webcast: New Features of Solaris 11.1 and Solaris Cluster 4.1

  - by Jeff Victor

  If you missed last week's webcast of the new features in Oracle Solaris 11.1 you can view the recording. The speakers discuss changes that improve performance and scalability, particularly for Oracle DB, and many other enhancements. New features include Optimized Shared Memory (improves DB startup time), accelerated kernel locks (improves Oracle RAC performance and scalability), virtual memory improvements, a DTrace data collecter in the DB, Zones installed on Shared Storage (simplifies migration), Data Center Bridging, and Edge Virtual Bridging. To view the archived webcast, you must register and use the URL that you receive in e-mail.

  Read the article

• Where are bluetooth received files saved

  - by Luis Alvarado

  I have used Blueman and the default Bluetooth manager an every time I accept the file transfer from the Phone to the PC, it shows that it is transferring and even notifies me that the transfer was successful but I can not find the image anywhere. Where are files stored after sending them via Bluetooth to the PC? I already checked my Home folder. The Picture folder which I thought it would be the one for images. Then the document folder and afterwards I did a huge check on all folders under /home. No luck. Is nowhere. I even checked this answer with no luck.

  Read the article

• Used DBAN to wipe Lenovo u410 then installed Ubuntu. Need to install windows 8, but I get an error.

  - by David

  When I try to boot from my windows 8 USB (tested on a separate PC), I get this error text "The boot configuration data for your pc is missing or contains errors." I want to install windows again so I can fix a battery issue I'm having. Lenovo's power management app has an option to keep the battery at 60% if the laptop stays plugged in most of the time. I enabled this, then formatted without changing it back. I think there might be a raid setup that I may need to remove or something. I don't mind removing Ubuntu and starting fresh. I would just love some help with all this, I'm a noob when it comes to Linux.

  Read the article

• New Oracles VM RAC template with support for oracle vm 3 built-in

  - by wcoekaer

  The RAC team did it again (thanks Saar!) - another awesome set of Oracle VM templates published and uploaded to My Oracle Support. You can find the main page here. What's special about the latest version of DeployCluster is that it integrates tightly with Oracle VM 3 manager. It basically is an Oracle VM frontend that helps start VMs, pass arguments down automatically and there is absolutely no need to log into the Oracle VM servers or the guests. Once it completes, you have an entire Oracle RAC database setup ready to go. Here's a short summary of the steps : Set up an Oracle VM 3 server pool Download the Oracle VM RAC template from oracle.com Import the template into Oracle VM using Oracle VM Manager repository - import Create a public and private network in Oracle VM Manager in the network tab Configure the template with the right public and private virtual networks Create a set of shared disks (physical or virtual) to assign to the VMs you want to create (for ASM/at least 5) Clone a set of VMs from the template (as many RAC nodes as you plan to configure) With Oracle VM 3.1 you can clone with a number so one clone command for, say 8 VMs is easy. Assign the shared devices/disks to the cloned VMs Create a netconfig.ini file on your manager node or a client where you plan to run DeployCluster This little text file just contains the IP addresses, hostnames etc for your cluster. It is a very simple small textfile. Run deploycluster.py with the VM names as argument Done. At this point, the tool will connect to Oracle VM Manager, start the VMs and configure each one, Configure the OS (Oracle Linux) Configure the disks with ASM Configure the clusterware (CRS) Configure ASM Create database instances on each node. Now you are ready to log in, and use your x node database cluster. x No need to download various products from various websites, click on trial licenses for the OS, go to a Virtual Machine store with sample and test versions only - this is production ready and supported. Software. Complete. example netconfig.ini : # Node specific information NODE1=racnode1 NODE1VIP=racnode1-vip NODE1PRIV=racnode1-priv NODE1IP=192.168.1.2 NODE1VIPIP=192.168.1.22 NODE1PRIVIP=10.0.0.22 NODE2=racnode2 NODE2VIP=racnode2-vip NODE2PRIV=racnode2-priv NODE2IP=192.168.1.3 NODE2VIPIP=192.168.1.23 NODE2PRIVIP=10.0.0.23 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=mydomain.com DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=racnode12-scan SCANIP=192.168.1.50

  Read the article

• Virtualbox will run from 32bit installation CD but not 64bit.

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Warning about SSL ceritificate, am I under attack ?

  - by Bunny Rabbit

  Lately I've been getting a lot of warnings about SSL certifications on my pc, Empathy keeps telling me that Facebook's certificate is self-signed and can't be trusted, and also, there are occasional warnings in Google-Chrome about security. I remember the last one saying that that the page is secured but some of the resources that the page is using are not from a secure connection, something like that. Is my pc hacked / under attack? How can I check that, and if so, how can I safeguard myself? PS: One thing that comes to my mind is that I might be under an arp poisoning / spoofing attack.

  Read the article

• Ubuntu systematically losing wired connection

  - by Lukasz Baczynski

  I'm working on 11.10 for few recent days, everything was working perfect until today. Updated ubuntu (some certs were updates as far as i remember) and from this time, wired network stops working randomly and systematically. (All other pcs/macs work fine) From 192.168.0.9 icmp_seq=25 Destination Host Unreachable From 192.168.0.9 icmp_seq=26 Destination Host Unreachable From 192.168.0.9 icmp_seq=27 Destination Host Unreachable From 192.168.0.9 icmp_seq=28 Destination Host Unreachable From 192.168.0.9 icmp_seq=29 Destination Host Unreachable From 192.168.0.9 icmp_seq=30 Destination Host Unreachable From 192.168.0.9 icmp_seq=31 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=32 ttl=64 time=1003 ms 64 bytes from 192.168.0.1: icmp_req=33 ttl=64 time=0.496 ms 64 bytes from 192.168.0.1: icmp_req=34 ttl=64 time=0.576 ms 64 bytes from 192.168.0.1: icmp_req=35 ttl=64 time=0.522 ms 64 bytes from 192.168.0.1: icmp_req=36 ttl=64 time=0.624 ms 64 bytes from 192.168.0.1: icmp_req=37 ttl=64 time=0.625 ms 64 bytes from 192.168.0.1: icmp_req=38 ttl=64 time=0.555 ms It'll work for 20 seconds then it'll stop working for 10-30sec and so on. I've tried setting my router to give static IPs, it doesn't help. NOTHING has been changed since yesterday beside the package update... Here are other settings that may be useful: baka@baka-PC:~/Private/projects/wduk$ lspci -nnk | grep -iA2 net 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Kernel driver in use: r8169 baka@baka-PC:~/Private/projects/wduk$ ifconfig -a eth0 Link encap:Ethernet HWaddr **Removed MAC address** inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:fe0a:85b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6400 errors:0 dropped:6400 overruns:0 frame:6400 TX packets:7085 errors:0 dropped:107 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4191983 (4.1 MB) TX bytes:886881 (886.8 KB) Interrupt:72 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2522 errors:0 dropped:0 overruns:0 frame:0 TX packets:2522 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1070130 (1.0 MB) TX bytes:1070130 (1.0 MB) baka@baka-PC:~/Private/projects/wduk$ cat /etc/resolv.conf # Generated by NetworkManager nameserver 8.8.8.8 thanks for help

  Read the article

• After suspend, my monitor wont turn back on

  - by David

  I set my pc to suspend after 5 minutes of inactivity, when I return to my computer I mash a couple of keys and the pc turns back on and the drives start spinning etc etc, but I get no signal to either of my monitors. My peripherals are powered as the num/caps lock lights turn on and off. I should add I have two monitors, I have the same problem on both. As I am writing the last line from my previous paragraph keeps disappearing. I press control z and it comes back but kinda weird. Thanks in advance for any help :)

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >