Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 219/301 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• How do you get better working conditions? [closed]

  - by 0A0D

  I work at a business who has a software side and manufacturing side. The software we write is sold as a package along with other hardware that our customers purchase. I basically work in a warehouse. There is one door that seperates the engineers from the warehouse noise. I have asked for noise cancelling walls to be put in. I have asked multiple times over 6 months to be moved up front to one of two vacant sales offices, but they seem reluctant to let an Engineer move into a sales office. In fact, sales are the only ones with windows and they get commission though they make mistakes or overpromise to the customer. So, my question is how can I get better working conditions without necessarily having to leave my current job? It is very hard to work and concentrate. UPDATE I think I can finally close this chapter in my life. I have moved on to a large corporation which follows CMMI religiously and has even started using Agile in many of its projects. Nevertheless, there is organization, respect, and genuine care for the engineers and scientists that work for them. Pierre was right - quitting was the right answer. My life does not nearly have the amount of stress it used to have because I now work for a place that is organized and knows what it wants its engineers to do along with treating them like they should be treated.

  Read the article

• How to diagnose Ubuntu CPU spikes / IO wait?

  - by Jeff Welling

  I'm using Ubuntu and every couple minutes it goes unresponsive for a half second to a full second, which isn't normally a problem but makes trying to code extremely frustrating when your trying to hit backspace or navigate the code and nothing is happening. The problem is, the freezes are so brief that top doesn't have time to show me what is spiking the CPU (assuming something is, but I don't know what else could cause this). Does anyone know how to troubleshoot this performance issue? Edit: I've tried login in with Gnome Classic (No Effects) instead of Unity but it still freezes up every once in awhile. Edit: The CPU graph doesn't seem to be showing any actual spikes so it seems you were right and my original diagnosis of CPU spikes being the problem was incorrect, I now suspect IO wait. I don't recall this happening for the brief few weeks I had Windows 7 Starter running on it though, which leads me to believe it isn't (just?) the hardware.. is there anything I can tweak to improve this? I'm using an Acer Aspire One D257, with Ubuntu 11.10. Edit: Output of dmesg is at http://paste.ubuntu.com/1060054/ and kern.log is at http://paste.ubuntu.com/1060055/

  Read the article

• KDE: How can I select audio output device for mplayer?

  - by grimripper

  I recently installed Kubuntu 13.10 64-bit, and I'm having a problem with selecting audio output device. In Phonon, when I select audio device preference order and press Apply, Amarok and Dragon will immediately switch to the preferred device. VLC and SMplayer are not affected. VLC has its own setting for selecting the output device, but SMplayer remains a problem. It always plays audio on internal audio, and I can't change output to HDMI. How can I select HDMI for SMplayer's audio output device? I don't know if it matters, but when I select HDMI audio in Phonon and click Test, the test sound plays on the internal audio output as well. In the hardware settings tab, the front left and front right test buttons play audio on HDMI. Also, volume up/down buttons affect HDMI volume when SMplayer is focused. This would make sense if I could get SMplayer to play audio over HDMI, but it would be better if the volume keys affected SMplayer's own volume, or the "mplayer2: audio stream" which appears in volume control while mplayer is playing. EDIT: I've recompiled mplayer with alsa support, and can now select the audio output device from SMplayer's settings. Didn't affect the issue with Phonon of course, but it's a suitable workaround.

  Read the article

• XNA 4.0, Combining model draw calls

  - by MayContainNuts

  I have the following problem: The levels in my game are made up of a Large Quantity of small Models and because of that I am experiencing frame rate problems. I already did some research and came to the conclusion that the amount of draw calls I am making must be the root of my problems. I've looked around for a while now and couldn't quite find a satisfying solution. I can't cull any of those models, in a worst case scenario there could be 1000 of them visible at the same time. I also looked at Hardware geometry Instancing, but I don't think that's quite what I'm looking for, because the level consists of a lot of different parts. So, what I'd like to do is combining 100 or 200 of these Models into a single large one and draw it as a whole 'chunk'. The whole geometry is static so it wouldn't have to be changed after combining, but different parts of it would have to use different textures (I think I can accomplish that with a texture atlas). But I have no idea how to to that, so does anybody have any suggestions?

  Read the article

• Multiple displays using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• invitation: Oracle Endeca Information Discovery Bootcamp

  - by mseika

  The Oracle Endeca Information Discovery (OEID) Boot Camp is designed to give partners an understanding of OEID’s features, and how it complements the existing Oracle Business Intelligence suite. Participants will learn how to develop & implement solutions using a Data Discovery method. Training is in EnglishWhat will be covered?The Oracle Endeca Information Discovery (OEID) Boot Camp is a three-day class with a combination of lecture and hands-on exercises, tailored to make participants aware of the Oracle Endeca Information Discovery platform, and to gain valuable skills for the implementation of projects.The course will follow a combination of lectures and hands-on lab sessions, to allow participants to apply the knowledge they have gained by extracting from sample data sources, and creating an end-user application that will be used to answer several business questions. What You Will Learn Architecture: OEID Components, use of graphs, overview of clustering OEID Installation: Architecture planning, infrastructure requirements, installation process, production hints & tips OEID Administration: Data store management, administrative operations, portal configuration, data sources, system monitoring Indexing: Integration Suite, Data source analysis, Graph (ETL) creation, record design techniques Portlets: Studio portlets, custom portlet development, querying functions Reporting: Studio applications & best practices, visualizations, EQL PrerequisitesYou must bring a laptop with you for the Hands-on labs ENVIRONMENT – LAPTOP REQUIREMENTS For the OEID boot camp, participants will perform the hands-on lab exercises using a virtual machine image. These virtual machines will be provided to participants within a cloud environment, requiring participants to bring a laptop to the Boot Camp that can access a Windows server utilizing Microsoft RDP from their laptop. Participants will not need to install any software onto their laptops, but must ensure that they have the proper software installed for their OS, to connect through RDP to a server. HARDWARE • CPU: Dual-core, x64, 1.8Ghz or higher • RAM: 2GB SOFTWARE • Microsoft Remote Desktop Client • Internet Explorer 7, Firefox, or Google Chrome This boot camp is intended for prospective implementers of Oracle Endeca Information Discovery (OEID), or those in a presales role looking to gain insight into the technical benefits of this new package. Attendees should have experience and familiarity with the basic concepts of business intelligence. Where and When ? Monday, October 15th until wednesday, October 17th included 9:00 - 18:00 Oracle France 15, boulevard Charles de Gaulle 92715 Colombes Access Register Here Limited number of seats !

  Read the article

• Alternative to NV Occlusion Query - getting the number of fragments which passed the depth test

  - by Etan

  In "modern" environments, the "NV Occlusion Query" extension provide a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? ... ?

  Read the article

• Do support sites like Stack Overflow upset the paid-support open source model?

  - by ajax81

  In order to stay relevant in the marketplace, I'm researching new business models for my software company. The open source model with paid support seems like a good fit for our product, but I have concerns about whether or not a paid support model is viable in an era where top-notch help is readily available for free on sites like those in the Stack Exchange network. Case in point -- I moved my employees to Ubuntu last year because I didn't want to pay for Win 7 licenses and new hardware (plus, the mono platform was highly attractive). My staff had no Linux experience, but were able to achieve relative competency in about 120 days with the help of AskUbuntu, Stack Overflow, and a few "For Dummies" books. We did employ an Ubuntu consultant for 7 days to provide training and support, but beyond that spent $0.00 on any kind of paid expertise. In regards to my due diligence, I ran a 3 month beta of the freemium-paid-support model with one of our smaller customers, and achieved mediocre results. I'd like to think its because our software is so stable and easy to use that the customer didn't need much paid support, but I suspect that they circumvented the terms of our SLA in the same manner that we did with the move to Ubuntu. Does anyone out there has any thoughts, advice, or experience relevant to the move I'm considering? What worked, what didn't, etc?

  Read the article

• Mix10 is in history, Windows Phone 7 is here!

  MIX10was really a fantastic conference for Telerik! We had great talks, many customers stopped by our booth and we've got a lot of great feedback for our Silverlight Controls. Thank you for stopping by and sharing your opinion! So now, that the MIX is over, there is one question left: What Telerik will develop for theWindows Phone 7? We had this question on the booth over and over again and it is no doubt that the WP7 development is a hot topic now. All we can sayat this momentis that Yes, we are looking into this and we actually have some of our controls already partially working with WP7 internally :) You know that the Silverlight version for WP7 is Silverlight 3 and it has some very good additions over it in order to support the phone hardware - like webcam, mic, accelerometer, etc. If you missed the conference and the sessions- here is a list of videos thatwill get you started: Building Windows Phone Applications with Silverlight, Part 1 Mike Harsh Building Windows Phone Applications with Silverlight, Part 2 Peter Torr The good thing isthat our controls will needvery few tweaks in order to be *compiled* against the WP7 Silverlight runtime. But, the more interesting part is actually what are the scenarios that our controls will be used in. How different they will be from the desktop version of the SL? This is where we need your feedback - drop as a line and let us know what are your expectations in this area. Do you need something specific, a feature or a new control that you like to use, or maybe you have a specific scenario that you want to share. Nowthe ball is in your hands - write on the forums, send us a ticket, or just leave your comment on WP7 developmentbelow! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• crippling repeating "pciehp card not present" notifications

  - by Nanne

  When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

  Read the article

• LiveMeeting VC PowerShell PASS – Troubleshooting SQL Server with PowerShell

  - by Laerte Junior

  Guys, join me on Wednesday July 18th 12 noon EDT (GMT -4) for a presentation called Troubleshooting SQL Server With PowerShell. It will be in English, so please make allowances for this. I’m sure that you’re aware that my English is not perfect, but it is not so bad. I will do my best, you can be sure. The registration link will be available soon from PowerShell.sqlpass.org, so I hope to see you there. It will be a session without slides. Just code; pure PowerShell code. Trust me, We will see a lot of COOL stuff.Big thanks to Aaron Nelson (@sqlvariant) for the opportunity! Here are some more details about the presentation: “Troubleshooting SQL Server with PowerShell – The Next Level’ It is normal for us to have to face poorly performing queries or even complete failure in our SQL server environments. This can happen for a variety of reasons including poor Database Designs, hardware failure, improperly-configured systems and OS Updates applied without testing. As Database Administrators, we need to take precaution to minimize the impact of these problems when they occur, and so we need the tools and methodology required to identify and solve issues quickly. In this Session we will use PowerShell to explore some common troubleshooting techniques used in our day-to-day work as s DBA. This will include a variety of such activities including Gathering Performance Counters in several servers at the same time using background jobs, identifying Blocked Sessions and Reading & filtering the SQL Error Log even if the Instance is offline The approach will be using some advanced PowerShell techniques that allow us to scale the code for multiple servers and run the data collection in asynchronous mode.

  Read the article

• Impossible to enable bluetooth under Ubuntu

  - by PCh

  I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

  Read the article

• Huwawei E220 broadband dongle not working

  - by Roshnal

  The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

  Read the article

• Start frei für die Exadata Community im neuen Look!

  - by Frank Schneede (Exadata Community)

  Endlich ist es soweit! Pünktlich mit dem Start der DOAG Konferenz 2012, die vom 20.11. - 22.11.2012 in Nürnberg stattfindet, geht die Deutsche Exadata Community in völlig neu gestaltetem Outfit an den Start. Sie werden hier regelmäßig über neue Ankündigungen sowie Tipps und Tricks im Umgang mit Exadata informiert. Durch das freiere Blogformat werden an dieser Stelle auch Berichte über Exadata Projekte erscheinen, die besonders hervorhebenswert sind. Ich denke, Sie dürfen gespannt sein! Vieles hat sich seit dem letzten Update in der Community getan, denn auf der diesjährigen Oracle Open World in San Franzisco wurde eine ganze Reihe spannender Ankündigungen rund um Exadata gemacht. Die kürzlich vorgestellten Modelle Exadata Database Machine X3-2 und X3-8 sind in der grundlegenden Architektur zwar unverändert geblieben, jedoch sind die Modelle mit aktuellen Prozessoren in SandyBridge Mikroprozessorarchitektur noch leistungsfähiger als bisher. Der vierfach vergrößerte Flash Cache nimmt wesentlich mehr Daten auf und macht die Exadata so zur "In-Memory" Database Machine. Mit der neuen Exadata Software 11.2.3.2 kann der Flash Cache nun als persistenter Write Back Flash Cache verwendet werden. Durch das neuartige Caching profitieren auch OLTP Applikationen, die eine hohe Last von schreibenden Transaktionen verursachen, stärker von der Exadata Technologie. Ein neues Einstiegsmodell, das Exadata X3-2 Eighth Rack, vervollständigt die Produktfamilie und senkt abermals die Einstiegshürde für die Kunden.  Die beiden Community Tipps zur Exadata Hardware wurden aktualisiert. Lesen Sie alles über die Exadata Database Machine X3-2 und deren große Schwester, die Exadata Database Machine X3-8.

  Read the article

• Compiling custom kernel 3.7.x lowlatency on Ubuntu 12.04

  - by FlabbergastedPickle

  All, I have a peculiar problem with trying to compile a lowlatency flavor of the latest 3.7 kernel. I retrieved the prepatched source from the launchpad using bzr, compiled it using the usual make-kpkg using the current config file plus default options for the rest, installed the kernel and booted into it. Everything works except for the fglrx and wl drivers that I had to install in the original 12.04 lowlatency kernel. So, I tried recompiling these and succeeded with both of them (no errors were reported)--wl driver required a minor adjustment to system.h include while latest fglrx 12.11 beta11 (released yesterday, Dec. 3rd, 2012) compiled without the hitch. Yet, when I try to modprobe either module (both having in common the fact that they were built after the kernel, fglrx as a deb, and wl via the usual make/make install), I get "FATAL: no MODULENAME module found" (MODULENAME being either wl or fglrx). The graphic driver watermark shows 3D crossed out and "for testing purposes" (or "unsupported hardware," can't remember), and no fglrx or wl is loaded. More mysteriously, dmesg shows no attempt on kernel's behalf to load the said drivers, even though they are clearly in the right /lib/modules/KERNEL_VERSION folder. How is this possible? Has something fundamentally changed in 3.7 kernel that would prevent modprobing of these? I know that there is driver signing option that was merged recently but as far as I could tell the kernel config file generated by the build process had that disabled. OTOH, while building wl driver, I did get a warning that the driver was not signed... Then again, even if the kernel disallowed loading of those modules, shouldn't dmesg reflect that? Any thoughts on this one are most appreciated.

  Read the article

• First ATMs programming language

  - by revo

  First ATMs performed tasks like a cash dispenser, they were offline machines which worked with punch cards impregnated with Carbon and a 6-digit PIN code. Maximum withdrawal with a card was 10 pounds and each one was a one-time use card - ATM swallowed cards! The first ATM was installed in London in the year 1967, as I looked at time line of programming languages, there were many programming languages made before that decade. I don't know about the hardware neither, but in which programming language it was written? *I didn't find a detailed biography of John Shepherd-Barron (ATM inventor at 70s) Update I found this picture, which is taken from a newspaper back to the year 1972 in Iran. Translated PS : Shows Mr. Rad-lon (if spelled correctly), The manager of Barros (if spelled correctly) International Educational Institute in United Kingdom at the right, and Mr. Jim Sutherland - Expert of Computer Kiosks. In the rest of the text I found on this paper, these kind of ATMs which called "Automated Computer Kiosk" were advertised with this: Mr. Rad-lon (if spelled correctly) puts his card to one specific location of Automated Computer Kiosk and after 10 seconds he withdraws his cash. Two more questions are: 1- How those ATMs were so fast? (withdrawal in 10 seconds in that year) 2- I didn't find any text on Internet which state about "Automated Computer Kiosk", Is it valid or were they being called Computer in that time?

  Read the article

• My cpus are powered down periodically

  - by mgiammarco

  I post here because I am using Ubuntu but this is probably an hardware problem. Since I bought my new setup with AMD Athlon(tm) II X4 635 Processor and asus m4a89td pro/usb3 motherboard with ecc ram I have stuttering on videos. I was using ubuntu 11.10 now ubuntu 12.10. Looking at syslog I have found that periodically (I notice only on videos but it happens always) this thing happens: Mar 6 23:36:42 virtual1 kernel: [28564.375548] smpboot: CPU 1 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.380751] smpboot: CPU 2 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.394947] smpboot: CPU 3 is now offline Mar 6 23:36:48 virtual1 kernel: [28569.917021] smpboot: Booting Node 0 Processor 1 APIC 0x1 Mar 6 23:36:48 virtual1 kernel: [28569.928015] LVT offset 0 assigned for vector 0xf9 Mar 6 23:36:48 virtual1 kernel: [28569.928372] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.928378] perf: IBS APIC setup failed on cpu #1 Mar 6 23:36:48 virtual1 kernel: [28569.931305] process: Switch to broadcast mode on CPU1 Mar 6 23:36:48 virtual1 kernel: [28569.934255] smpboot: Booting Node 0 Processor 2 APIC 0x2 Mar 6 23:36:48 virtual1 kernel: [28569.945554] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.945558] perf: IBS APIC setup failed on cpu #2 Mar 6 23:36:48 virtual1 kernel: [28569.948124] process: Switch to broadcast mode on CPU2 Mar 6 23:36:48 virtual1 kernel: [28569.949644] smpboot: Booting Node 0 Processor 3 APIC 0x3 Mar 6 23:36:48 virtual1 kernel: [28569.960838] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.960840] perf: IBS APIC setup failed on cpu #3 Mar 6 23:36:48 virtual1 kernel: [28569.962953] process: Switch to broadcast mode on CPU3 I have: updated bios; tried all (really) bios options; changed ram; changed psu and cpu cooler; tried 3.8.1 kernel. What can I do now? Please help me! Thanks, Mario

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• How to focus on one topic? [closed]

  - by Brian

  I have a huge problem while reading computer books. Every couple pages I'll end up googling something I want to learn more about, but then I'll find something on that page that I'll want to learn more about and google that (sometimes programming related, sometime hardware related). Normally after wasting around 3 hours going into different subjects I'll return to the original text only to repeat the process a few pages later. Any advice for sticking to one subject and learning that in-depth? I have tons of programming books I've read half-way through since I'll become interested in other languages/topics (not that I'm not interested in the books I've started). Also, what would be worth focusing on in depth? I've gone into Python in the most depth but for classes I'm learning Java and assembly (ARM and Motorola 68000). Also, I've taken a class on C++. Lately I've been spending most of my time learning about Linux instead of programming though. I'm not sure what would be worth focusing on the most to get a job. In other words, how can you focus on one topic and not let curiosity about everything else get in the way? Thanks in advance, Brian

  Read the article

• Challenge Ends on Friday!

  - by Yolande Poirier

  This is your last chance to win a JavaOne trip. Submit a project video and code for the IoT Developer Challenge by this Friday, May 30.  12 JavaOne trips will be awarded to 3 professional teams and one student team. Members of two student teams will win laptops and certification training vouchers. Ask your last minute questions on the coaching form or the Challenge forum. They will be answered promptly. Your project video should explain how your project works. Any common video format such as mp4, avi, mov is fine. Your project must use Java Embedded - whether it is Java SE Embedded or ME Embedded - with the hardware of your choice, including any devices, boards and IoT technology. The project will be judged based on the project implementation, innovation and business usefulness. More details on the IoT Developer Challenge website  Just for fun! Here is a video of Vinicius Senger giving a tour of his home lab, and showing his boards and gadgets. &lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt;

  Read the article

• Enterprise Cloud Infrastructure for Dummies eBook

  - by ferhat

  Are you considering "going to the cloud" as a way to cut IT costs and maximize your virtualization investments? Then Enterprise Cloud Infrastructure for Dummies is a no-nonsense guide to help you navigate this hot topic. This user friendly guide explains how to cut through the noise and take advantage of integrated virtualization and management tools to implement a cloud infrastructure that not only lowers operational costs but that can easily adapt and scale to run a broad range of application services safely and securely. &amp;amp;<span id="XinhaEditingPostion"></span>amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;gt; This e-book will serve as a valuable Cloud computing guide covering important topics such as: The current overall cloud landscape and how to best leverage private cloud infrastructure How to build an effective Enterprise Cloud Infrastructure using the Oracle Optimized Solution methodology Quantifiable costs savings gained using Oracle's integrated hardware and software and Optimized Solutions Download your exclusive copy of Enterprise Cloud Infrastructure, Oracle Special Edition today.

  Read the article

• Skynet Big Data Demo Using Hexbug Spider Robot, Raspberry Pi, and Java SE Embedded (Part 3)

  - by hinkmond

  In Part 2, I described what connections you need to make for this demo using a Hexbug Spider Robot, a Raspberry Pi, and Java SE Embedded for programming. Here are some photos of me doing the soldering. Software engineers should not be afraid of a little soldering work. It's all good. See: Skynet Big Data Demo (Part 2) One thing to watch out for when you open the remote is that there may be some glue covering the contact points. Make sure to use an Exacto knife or small screwdriver to scrape away any glue or non-conductive material covering each place where you need to solder. And after you are done with your soldering and you gave the solder enough time to cool, make sure all your connections are marked so that you know which wire goes where. Give each wire a very light tug to make sure it is soldered correctly and is making good contact. There are lots of videos on the Web to help you if this is your first time soldering. Check out Laday Ada's (from adafruit.com) links on how to solder if you need some additional help: http://www.ladyada.net/learn/soldering/thm.html If everything looks good, zip everything back up and meet back here for how to connect these wires to your Raspberry Pi. That will be it for the hardware part of this project. See, that wasn't so bad. Hinkmond

  Read the article

• Best Usage of Multiple Computers For a Developer

  - by whaley

  I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

  Read the article

• Could someone explain why my world reconstructed from depth position is incorrect?

  - by yuumei

  I am attempting to reconstruct the world position in the fragment shader from a depth texture. I pass in the 8 frustum points in world space and interpolate them across fragments and then interpolate from near to far by the depth: highp float depth = (2.0 * CameraPlanes.x) / (CameraPlanes.y + CameraPlanes.x - texture( depthTexture, textureCoord ).x * (CameraPlanes.y - CameraPlanes.x)); // Reconstruct the world position from the linear depth highp vec3 world = mix( nearWorldPos, farWorldPos, depth ); CameraPlanes.x is the near plane CameraPlanes.y is the far. Assuming that my frustum positions are correct, and my depth looks correct, why is my world position wrong? (My depth texture is of format GL_DEPTH_COMPONENT32F if that matters) Thanks! :D Update: Screenshot of world position http://imgur.com/sSlHd So you can see it looks nearly correct. However as the camera moves, the colours (positions) change, which they shouldnt. I can get this to work, if I do the following: Write this into the depth attachment in the previous pass: gl_FragDepth = gl_FragCoord.z / gl_FragCoord.w / CameraPlanes.y; and then read the depth texture like so: depth = texture( depthTexture, textureCoord ).x However this will kill the hardware z buffer optimizations.

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >