Search Results

Search found 7628 results on 306 pages for 'internal communications'.

Page 219/306 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• Upgarde from Asp.Net MVC 1 to MVC 2 - how to and issues with JsonRequestBehavior

  - by Renso

  Goal Upgrade your MVC 1 app to MVC 2 Issues You may get errors about your Json data being returned via a GET request violating security principles - we also address this here. This post is not intended to delve into why the Json GET request is or may be an issue, just how to resolve it as part of upgrading from MVC1 to 2. Solution First remove all references from your projects to the MVC 1 dll and replace it with the MVC 2 dll. Now update your web.config file in your web app root folder by simply changing references to assembly="System.Web.Mvc, Version 1.0.0.0 to Version 2.0.0.0, there are a couple of references in your config file, here are probably most of them you may have:         <compilation debug="true" defaultLanguage="c#">             <assemblies>                        <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />             </assemblies>         </compilation>           <pages masterPageFile="~/Views/Masters/CRMTemplate.master" pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validateRequest="False">             <controls>                 <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />   Secondly, if you return Json objects from an ajax call via the GET method you ahve several options to fix this depending on your situation: 1. The simplest, as in my case I did this for an internal web app, you may simply do:             return Json(myObject, JsonRequestBehavior.AllowGet);   2. In Mvc if you have a controller base you could wrap the Json method with:         public new JsonResult Json(object data)         {             return Json(data, "application/json", JsonRequestBehavior.AllowGet);                    }   3. The most work would be to decorate your Actions with:         [AcceptVerbs(HttpVerbs.Get)]   4. Another tnat is also a lot of work that needs to be done to every ajax call returning Json is:                             msg = $.ajax({ url: $('#ajaxGetSampleUrl').val(), dataType: 'json', type: 'POST', async: false, data: { name: theClass }, success: function(data, result) { if (!result) alert('Failure to retrieve the Sample Data.'); } }).responseText;   This should cover all the issues you may run into when upgrading. Let me kow if you run into any other ones.

  Read the article

• Kubuntu 12.04 - Touchpad and keyboard stopped working at random

  - by StepTNT

  As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

  Read the article

• Oracle GoldenGate: Knowledge Document Series Post #1

  - by Doug Reid

  0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Over the course of the next several weeks, the Oracle GoldenGate team will be posting highlights from the knowledge base on My Oracle Support. The intent is to bring greater awareness to our user community of some fantastic best practices documents that are available to anyone with a valid CSI.   These documents were originally created for our internal teams, but the content was so good and useful that we have made them available externally for our user community.  The first in our series is the Oracle GoldenGate database Schema Profile check script (Doc ID 1296168.1). “This script is intended to query the database by schema to identify current configuration and identify any unsupported data types or types that may need special considerations for Oracle GoldenGate in an Oracle environment. This is the Oracle database profile script.  Added check for deferred constraints. Deferred constraints may cause ADD TRANDATA to select the wrong column for logging. Use KEYCOLS for tables with deferred constraints.” Click here to view the document  Check back weekly for additional new postings.

  Read the article

• How to Make Objects Fall Faster in a Physics Simulation

  - by David Dimalanta

  I used the collision physics (i.e. Box2d, Physics Body Editor) and implemented onto the java code. I'm trying to make the fall speed higher according to the examples: It falls slower if light object (i.e. feather). It falls faster depending on the object (i.e. pebble, rock, car). I decided to double its falling speed for more excitement. I tried adding the mass but the speed of falling is constant instead of gaining more speed. check my code that something I put under input processor's touchUp() return method under same roof of the class that implements InputProcessor and Screen: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } And take note, at show() method , the view size from the camera is at 720x1280: camera_1 = new OrthographicCamera(); camera_1.viewportHeight = 1280; camera_1.viewportWidth = 720; camera_1.position.set(camera_1.viewportWidth * 0.5f, camera_1.viewportHeight * 0.5f, 0f); camera_1.update(); I know it's a good idea to add weight to make the falling object falls faster once I released the finger from the touchUp() after I picked the object from the upper right of the screen but the speed remains either constant or slow. How can I solve this? Can you help?

  Read the article

• New Version Demonstration VM BIC2g 2013-04 Partner Edition

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 This Oracle Business Intelligence Linux VM virtual appliance (“BIC2g”) was developed to support Oracle OBI & BI-Apps sales and Oracle partners in product demonstrations, training activities and POC activities. It is available on ftp.oracle.com (see the deployment guide and “BIC2g 2013-04 Partner Edition Readme” pdf from the link below) and is available for OPN member partners. This BIC2g image is based on OBIEE v. 11.1.1.7. with Essbase and Essbase Studio Server started when starting BI. It also contains: Updated BI-Apps Cross Functional Demo (date advanced from 2011 to 2013), including DAC 11.1.1.6.4, Informatica 9.0.1 and is configured for a load against EBS R12. Both the 7.9.6.3 rpd/catalog and the 7.9.6.4 rpd/catalog versions of BI-Apps are provided. Updated integrated Essbase - BI Apps - EBS Demo (date advanced from 2009 to 2013. Re-configured BI Apps Data Sets to remove VPD (simplification) and greatly improved performance. Note that this image is identical to Oracle’s internal BI demonstration image, except that Endeca has been removed pending Endeca latest version availability on OTN. Once it is available on OTN we will provide a replacement that contains Endeca. Some of the screen shots in the “Readme”.pdf shows Endeca, but it is not on this (2013-04) image. The FTP access details and password are shown at the bottom of the page @ BI Solutions Engineering Partner Portal. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• What if you could work on anything you wanted?

  - by Nick Harrison

  What if you could work on anything you wanted? Redgate is doing an experiment of sorts this week.  Called Down Tools Week.    The idea is that they stopped working on their regular projects for a week and strike out on something that catches their attention and drives their passion. Evidently in many cases, these projects have turned out to be new features in their existing products that individual were interested in, some were internal iniatives and some where evidently off the wall new ideas.   Today is show and tell where they will share with each other what they have been working on. There may well be some interesting announcements coming out of this.    The prospects are exciting. I understand that Google does something similar allowing their employees a specified amount of time to work on projects of their own choosing.    This has been the breeding ground for some of my favorite services. It is a shame that more companies do not follow such practices.   Now I know that most companies cannot afford to shut down everything for a week and sometimes you can't really explore an interesting idea in 8 hours a week or however much time Google allocates, but still it may be worth while. What would happen if your company gave you as an individual 1 week each quarter to work on a project of your own design and see what happens?   I would be happen if you still had to get approval for before your week long adventure. Personally, I think that this could be a very effective use of training budgets.   Give me a week to research something on my own and you would be amazed at what I can find out.    Maybe this should be the prerequisite before starting a new project.   Stagger the team onboarding but have everyone spend a week long sabbatical studying BizTalk before starting a project that will hinge on BizTalk. The show and tell afterwards is a great way to keep everyone honest or at least reassure management that everyone is honest.    If your goal was to spend a week researching and exploring a new technology and you had to do a show and tell afterwards to show off what you had learned, then everyone can learn a bit of what you just learned.     Sounds like a promising win win for me. Maybe it is a pipe dream, but what if .... What would you work on if given the opportunity to work on anything you wanted?

  Read the article

• Unable to connect to Wireless after installing Ubuntu 12.10

  - by Moulik

  I am using Asus U56E laptop and after installing Ubuntu 12.10 alongside Windows 8, I am unable to connect to the Wireless. I have been trying to solve this problem since two weeks and couldn't solve it. Please help. Any answer would be appreciated. Here are some command-line results. lspci -v | grep -iA 7 network ubuntu@ubuntu:~$ lspci -v | grep -iA 7 network 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at de800000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi lsmod | grep iwlwifi ubuntu@ubuntu:~$ lsmod | grep iwlwifi iwlwifi 386826 0 mac80211 539908 1 iwlwifi cfg80211 206566 2 iwlwifi,mac80211 ubuntu@ubuntu:~$ dmesg | grep iwlwifi [ 57.846261] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 57.846264] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 57.846336] iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000 [ 57.846338] iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000c7c000 [ 57.846341] iwlwifi 0000:02:00.0: >HW Revision ID = 0x67 [ 57.846438] iwlwifi 0000:02:00.0: >irq 52 for MSI/MSI-X [ 59.558335] iwlwifi 0000:02:00.0: >loaded firmware version 41.28.5.1 build 33926 [ 59.558514] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 59.558516] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 59.558517] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 59.558519] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 59.558520] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled [ 59.558522] iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84 [ 59.558583] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 59.569083] iwlwifi 0000:02:00.0: >device EEPROM VER=0x557, CALIB=0x6 [ 59.569085] iwlwifi 0000:02:00.0: >Device SKU: 0x150 [ 59.569087] iwlwifi 0000:02:00.0: >Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 59.569100] iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 70.208469] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.208648] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 [ 70.366319] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.366470] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 sudo lshw -c network ubuntu@ubuntu:~$ sudo lshw -c network *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:84:99:c4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.5.0-17-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 54:04:a6:2b:6a:ef capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) ifconfig ubuntu@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 54:04:a6:2b:6a:ef UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:176 errors:0 dropped:0 overruns:0 frame:0 TX packets:176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14368 (14.3 KB) TX bytes:14368 (14.3 KB) wlan0 Link encap:Ethernet HWaddr 40:25:c2:84:99:c4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) iwconfig ubuntu@ubuntu:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off iwlist scan ubuntu@ubuntu:~$ iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results nm-tool ubuntu@ubuntu:~$ nm-tool NetworkManager Tool State: disconnected - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 54:04:A6:2B:6A:EF Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: disconnected Default: no HW Address: 40:25:C2:84:99:C4 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points hypeness2: Infra, 00:21:29:DA:08:4F, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA love: Infra, 68:7F:74:17:02:66, Freq 2412 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 DIRECT-MwSCX-3400Pamela: Infra, 02:15:99:A3:3F:AC, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2 router: Infra, 1C:AF:F7:D6:76:F3, Freq 2417 MHz, Rate 54 Mb/s, Strength 20 WPA2 wing: Infra, E8:40:F2:34:E4:F7, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 132LINKSYS: Infra, 00:1A:70:80:1F:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 57 WEP VMITTAL: Infra, E0:46:9A:3C:F0:C4, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WEP HP-Print-10-LaserJet 1025: Infra, 7C:E9:D3:7E:F8:10, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 ACNBB: Infra, 00:26:75:22:A6:2F, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 SATKAIVAL: Infra, 00:18:E7:CE:69:A6, Freq 2412 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2 hypeness: Infra, B8:E6:25:24:C3:B1, Freq 2437 MHz, Rate 54 Mb/s, Strength 54 WPA WPA2 CSNetwork: Infra, BC:14:01:58:C5:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2 tharma: Infra, BC:14:01:E2:06:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2 Active2.4: Infra, 10:6F:3F:0E:F3:8E, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 ACNBB: Infra, 00:26:75:58:4E:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 85 KO: Infra, BC:14:01:2E:AF:A8, Freq 2452 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 FEAR: Infra, 00:18:4D:C0:BC:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA Pamela: Infra, BC:14:01:52:F6:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 bvrk2: Infra, 78:CD:8E:7B:3C:79, Freq 2457 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 BELL030: Infra, D8:6C:E9:17:AF:09, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 WPA2 Desai: Infra, 00:1D:7E:52:FB:C5, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WEP Sritharan: Infra, BC:14:01:E5:59:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 PFN: Infra, 00:13:10:8B:CF:45, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WEP rfkill list all ubuntu@ubuntu:~$ rfkill list all 0: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wimax: WiMAX Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no so these are some more results sudo modprobe -r iwlwifi ubuntu@ubuntu:~$ sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1 ubuntu@ubuntu:~$ sudo modprobe iwlwifi 11n_disable=1 echo "blacklist asus_wmi" | sudo tee -a /etcmodprobe.d/blacklist.conf ubuntu@ubuntu:~$ echo "blacklist asus_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf blacklist asus_wmi echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf ubuntu@ubuntu:~$ echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi ubuntu@ubuntu:~$ sudo modprobe -rfv iwlwifi rmmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko sudo modprobe -v iwlwifi ubuntu@ubuntu:~$ sudo modprobe -v iwlwifi insmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko 11n_disable=1

  Read the article

• Synchronizing ODSEE and OUD

  - by Etienne Remillon

  When it comes to synchronizing between ODSEE and OUD, what should be the best options ? Couple  options are available - Use one of OUD internal capability called Replication Gateway - Use our synchronization tool called Directory Integration Platform part of Oracle Directory Services Plus - Manuel export and import Let's check pro and cons on each method. Replication Gateway is the natural, out of the box solution to perform the task. We created this as a feature of OUD because it works at our replication protocol level. The gateway perform the required adaptation between the ODSEE's replication protocol and OUD's one. The benefits of doing this is that it provide strong consistency between the to type of directories. This fully leverage conflict management implemented in the replication protocols to ensure that changes are applied in a coherent and ordered manner. It does not require specific modification on existing ODSEE production instances such as turning on "retro changelog". Changes are propagated at near speed of replication in both directions. Replication Gateway can also synchronize information that are stored internally in the directory server such as "xxxxx" account locking managed at ODSEE server level and not via the nsyyyy attribute. OUD replication gateway does no require any specific tools or installation specific procedure. It is manged like other OUD component with monitoring and configuration via the standard console. OUD Replication Gateway does not perform adaptation between ODSEE and OUD. Using Directory Integration Protocol as external component to OUD, brings flexibility in remapping and transformations between ODSEE and OUD. There is a price to pay in using DIP to perform the synchronization task. You will have to turn on the retro change log to get access to changes on the ODSEE side (this will impact disk and CPU usage and performances which could be a serious challenge for your existing ODSEE environment (if you have not provisioned additional hardware and instances). You will not benefits of conflict resolution management and this might have to be addressed at application level, which is not always possible to implement. Using export and import seams very simple, but this methodology cannot ensure an highly available deployment with up to date entries on booth sides. This solution can be used if full HA with up-to-date data is not needed (during synchronization time). It often used  if data-cleaning need to take place to avoid polluting a new environment with old un-necessary data.

  Read the article

• Do we need to adopt a black-box asset our project is inheriting from its predecessor?

  - by Tom Anderson

  Our client has an eCommerce site which was developed by an in-house team, and is now showing its age. I work for a firm brought in as external contractors to build a replacement. Part of the current site is a Flash viewer applet which displays media about the product - zoom-able images, 360-degree views, movies, and so on. We need to show the same media the current site does, so we are simply reusing the viewer. The viewer is embedded on a page in the usual way, and told what media to show by means of an XML file it loads from our server, which is pretty simple for us to generate. We've got this working; it was pretty straightforward. But what else do we need to do? The thing is, as far as we're concerned, the viewer is a binary blob which is served from the client's content-distribution network. We embed it, feed it some XML, and it does its job, but we have no power over its internals. It's completely opaque to us - a black box. We can use it to do what it does, but we can't change it, so if we ever need to do something different, we're stuffed. We're building this site for the client, and when we're done, we'll hand it over for them to maintain. We won't be doing the maintenance ourselves. There's a small team within the client who are working as part of our team, and who will be the ones doing the maintenance. That team only includes one person from the team that built the old site, and it's not someone who knows the image viewer. The people who do know the image viewer are not slated to join our team when our system replaces theirs - they'll be moved to other projects. The documentation on the viewer is extremely thin, and as far as i know doesn't cover the internals at all. My worry is that if someone doesn't take some positive action, all knowledge of the internal workings of the viewer - even down to where the source code for it is - will be lost. It's possible it already has been. Is this something to worry about? If so, whose job is it to worry about it? What should they do about it once they've got worried?

  Read the article

• WebCenter Customer Spotlight: Marvel

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryMarvel Entertainment, LLC (Marvel) is one of the world's most prominent character-based entertainment companies, built on a proven library of over 8,000 characters featured in a variety of media over seventy years. The customer wanted to optimize their brand licensing process, so Marvel worked with Oracle WebCenter partner Fishbowl Solutions and implemented a centralized Content Hub based on Oracle WebCenter Content. The 100% web based secure Intranet/Partner Extranet solution is now managing the entire life cycle of the brand licensing process. Marvel and their brand licensees have  now complete visibility of brand license operations including the history of approval request and related content.  Company OverviewMarvel Entertainment, LLC (Marvel) a wholly-owned subsidiary of The Walt Disney Company, is one of the world's most prominent character-based entertainment companies, built on a proven library of over 8,000 characters featured in a variety of media over seventy years.  Marvel utilizes its character franchises in entertainment, licensing and publishing.   Sample  characters:    - Spider-Man    - Iron Man    - Captain America    - X-MEN    - Thor    - Avengers    - And a host of others  Business ChallengesMarvel wanted to optimize their brand licensing process for their characters and had following business requirements : Facilitating content worldwide Scalable and flexible infrastructure to manage multiple content types and huge file sizes Optimize the licensing process workflow trough automatic notifications, tracking reviews, issuing approvals, etc. Solution DeployedMarvel worked with Oracle WebCenter partner Fishbowl Solutions and implemented a centralized Content Hub based on Oracle WebCenter Content. The 100% web based secure Intranet/Partner Extranet solution is now managing the entire life cycle of the brand licensing process. The internal users can now manage all digital assets related to a character trough proper categorization of all items, workflow based review and approval of branding styles and a powerful search and retrieval service. The licensees of Marvel brands can now online develop and submit  concepts and prototypes which are reviewed and approved using a collaborative process. Business ResultMarvel and their brand licensees have now complete visibility of brand license operations including the history of approval request and related content. The character brand related content is now in the right place, at the right time at the user's fingertips with highly improved quality. Additional Information Marvel Open World Presentation Oracle WebCenter Content

  Read the article

• Configuring Full-Text Search for pdf and docx files

  - by Lukasz Kurylo

  I think in may I was creating a little filters module based on Full Text-Search. I have configured my dev machine, the same for two testing servers – in our company for internal testing before we deployed it to client, and then on the testing client server. Until last week this build  was still on the testing server and finally we got feedback that we can deploy it on the production one. I only say that, I lost half a day because I had not correctly remembered what I was doing to configure the FTS on the previous servers and I had no notes for that. I foolishly believed in my memory. Lesson learned.   For future reference a bunch of steps to configure the FTS for searching in *.pdf and *.docx files (and by the way in other Office files like *.xlsx).   1. From the page (link) download and install the *.pdf IFilter for FTS. 2. To the PATH global system variable add path to the catalog, where you installed the plugin. Default for this version is: C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin 3. From the page (link) download a FilterPackx64.exe and install it. 4. Now from SSMS execute the following procedures: -sp_fulltext_service 'load_os_resources',1 -sp_fulltext_service 'verify_signature', 0 5. Restart the server 6. Now we must check if the plugins are visible: -select document_type, path from sys.fulltext_document_types where document_type = '.pdf' -select document_type, path from sys.fulltext_document_types where document_type = '.docx' 7. If we see a result, then we can assume that everything is ok*. 8. Right now we can create a catalog for FTS and indexes on appropriate columns.     *I lost a lot of hours to find out, why the plugin for the *.pdf files wasn’t indexed any file in the database, but in the sys.fulltext_document_types table there was available a line for this plugin. After the deeper investigation I found that the *.pdf files actually were indexed. At least the EOF sign was added to the indexes and nothing more for each file. In the end the problem was that, I forgot to add the /bin in the path to the plugin in PATH variable..

  Read the article

• Removing Menu Items from Window Tabs

  - by Geertjan

  So you're working on your NetBeans Platform application and you notice that when you right-click on tabs in the predefined windows, e.g., the Projects window, you see a long list of popup menus. For whatever the reason is, you decide you don't want those popup menus. You right-click the application and go to the Branding dialog. There you uncheck the checkboxes that are unchecked below: As you can see above, you've removed three features, all of them related to closing the windows in your application. Therefore, "Close" and "Close Group" are now gone from the list of popup menus: But that's not enough. You also don't want the popup menus that relate to maximizing and minimizing the predefined windows, so you uncheck those checkboxes that relate to that: And, hey, now they're gone too: Next, you decide to remove the feature for floating, i.e., undocking the windows from the main window: And now they're gone too: However, even when you uncheck all the remaining checkboxes, as shown here... You're still left with those last few pesky popup menu items that just will not go away no matter what you do: The reason for the above? Those actions are hardcoded into the action list, which is a bug. Until it is fixed, here's a handy workaround: Set an implementation dependency on "Core - Windows" (core.window). That is, set a dependency and then specify that it is an implementation dependency, i.e., that you'll be using an internal class, not one of the official APIs. In one of your existing modules, or in a new one, make sure you have (in addition to the above) a dependency on Lookup API and Window System API. And then, add the class below to the module: import javax.swing.Action; import org.netbeans.core.windows.actions.ActionsFactory; import org.openide.util.lookup.ServiceProvider; import org.openide.windows.Mode; import org.openide.windows.TopComponent; @ServiceProvider(service = ActionsFactory.class) public class EmptyActionsFactory extends ActionsFactory { @Override public Action[] createPopupActions(TopComponent tc, Action[] actions) { return new Action[]{}; } @Override public Action[] createPopupActions(Mode mode, Action[] actions) { return new Action[]{}; } } Hurray. Farewell to superfluous popup menu items on your window tabs. In the screenshot below, the tab of the Projects window is being right-clicked and no popup menu items are shown, which is true for all the other windows, those that are predefined as well as those that you add afterwards:

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• Some More New ADF Features in JDeveloper 11.1.2

  - by Steven Davelaar

  The official list of new features in JDeveloper 11.1.2 is documented here. While playing with JDeveloper 11.1.2 and scanning the web user interface developer's guide for 11.1.2, I noticed some additional new features in ADF Faces, small but might come in handy:  You can use the af:formatString and af:formatNamed constructs in EL expressions to use substituation variables. For example: <af:outputText value="#{af:formatString('The current user is: {0}',someBean.currentUser)}"/> See section 3.5.2 in web user interface guide for more info. A new ADF Faces Client Behavior tag: af:checkUncommittedDataBehavior. See section 20.3 in web user interface guide for more info. For this tag to work, you also need to set the  uncommittedDataWarning  property on the af:document tag. And this property has quite some issues as you can read here. I did a quick test, the alert is shown for a button that is on the same page, however, if you have a menu in a shell page with dynamic regions, then clicking on another menu item does not raise the alert if you have pending changes in the currently displayed region. For now, the JHeadstart implementation of pending changes still seems the best choice (will blog about that soon). New properties on the af:document tag: smallIconSource creates a so-called favicon that is displayed in front of the URL in the browser address bar. The largeIconSource property specifies the icon used by a mobile device when bookmarking the page to the home page. See section 9.2.5 in web user interface guide for more info. Also notice the failedConnectionText property which I didn't know but was already available in JDeveloper 11.1.1.4. The af:showDetail tag has a new property handleDisclosure which you can set to client for faster rendering. In JDeveloper 11.1.1.x, an expression like #{bindings.JobId.inputValue} would return the internal list index number when JobId was a list binding. To get the actual JobId attribute value, you needed to use #{bindings.JobId.attributeValue}. In JDeveloper 11.1.2 this is no longer needed, the #{bindings.JobId.inputValue} expression will return the attribute value corresponding with the selected index in the choice list. Did you discover other "hidden" new features? Please add them as comment to this blog post so everybody can benefit. 

  Read the article

• Swiss Re increases data warehouse performance and deploys in record time

  - by KLaker

  Great information on yet another data warehouse deployment on Exadata. A little background on Swiss Re: In 2002, Swiss Re established a data warehouse for its client markets and products to gather reinsurance information across all organizational units into an integrated structure. The data warehouse provided the basis for reporting at the group level with drill-down capability to individual contracts, while facilitating application integration and data exchange by using common data standards. Initially focusing on property and casualty reinsurance information only, it now includes life and health reinsurance, insurance, and nonlife insurance information. Key highlights of the benefits that Swiss Re achieved by using Exadata: Reduced the time to feed the data warehouse and generate data marts by 58% Reduced average runtime by 24% for standard reports comfortably loading two data warehouse refreshes per day with incremental feeds Freed up technical experts by significantly minimizing time spent on tuning activities Most importantly this was one of the fastest project deployments in Swiss Re's history. They went from installation to production in just four months! What is truly surprising is the that it only took two weeks between power-on to testing the machine with full data volumes! Business teams at Swiss Re are now able to fully exploit up-to-date analytics across property, casualty, life, health insurance, and reinsurance lines to identify successful products. These points are highlighted in the following quotes from Dr. Stephan Gutzwiller, Head of Data Warehouse Services at Swiss Re:  "We were operating a complete Oracle stack, including servers, storage area network, operating systems, and databases that was well optimized and delivered very good performance over an extended period of time. When a hardware replacement was scheduled for 2012, Oracle Exadata was a natural choice—and the performance increase was impressive. It enabled us to deliver analytics to our internal customers faster, without hiring more IT staff" “The high quality data that is readily available with Oracle Exadata gives us the insight and agility we need to cater to client needs. We also can continue re-engineering to keep up with the increasing demand without having to grow the organization. This combination creates excellent business value.” Our full press release is available here: http://www.oracle.com/us/corporate/customers/customersearch/swiss-re-1-exadata-ss-2050409.html. If you want more information about how Exadata can increase the performance of your data warehouse visit our home page: http://www.oracle.com/us/products/database/exadata-database-machine/overview/index.html

  Read the article

• Unable to Mount an external hard drive (NTFS)

  - by Mediterran81

  Ubuntu 11.10. When I plug my external Drive Western Digital MyPassport (500Go NTFS) I named WD. I get the following error: Unable to mount WD Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on /media/WD mount failed I have no problem with the internal NTFS partitions that auto-mounts on startup (ntfs-config does that). If I plug the WD before I boot Ubuntu, upon login, it's recognized and I can access without no problem. But if I remove it using (Safely remove) and then replug it, I get the error above. Here is my fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda5 : UUID=24540d0f-5803-493c-ace9-e3b3c0cedb26 / ext4 errors=remount-ro 0 1 #Entry for /dev/sda3 : UUID=E4C43F7EC43F51D2 /media/OS ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sda2 : UUID=6A0070F10070C61B /media/RECOVERY ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=EA6854D268549F5F /media/WD ntfs-3g defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 #Entry for /dev/sda6 : UUID=ed077c52-c50e-406c-9120-9cb6f86ec204 none swap sw 0 0 Here is my mtab /dev/sda5 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /media/OS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sda2 /media/RECOVERY fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sdb1 /media/WD fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/hanine/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=hanine 0 0 Appearently it cannot be mounted because upon login, it finds that it is already mounted. Some sort of conflict. Does anyone have a clue on how to solve this. Thanks.

  Read the article

• Secure Your Wireless Router: 8 Things You Can Do Right Now

  - by Chris Hoffman

  A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

  Read the article

• Is it ok to initialize an RB_ConstraintActor in PostBeginPlay?

  - by Almo

  I have a KActorSpawnable subclass that acts weird. In PostBeginPlay, I initialize an RB_ConstraintActor; the default is not to allow rotation. If I create one in the editor, it's fine, and won't rotate. If I spawn one, it rotates. Here's the class: class QuadForceKActor extends KActorSpawnable placeable; var(Behavior) bool bConstrainRotation; var(Behavior) bool bConstrainX; var(Behavior) bool bConstrainY; var(Behavior) bool bConstrainZ; var RB_ConstraintActor PhysicsConstraintActor; simulated event PostBeginPlay() { Super.PostBeginPlay(); PhysicsConstraintActor = Spawn(class'RB_ConstraintActorSpawnable', self, '', Location, rot(0, 0, 0)); if(bConstrainRotation) { PhysicsConstraintActor.ConstraintSetup.bSwingLimited = true; PhysicsConstraintActor.ConstraintSetup.bTwistLimited = true; } SetLinearConstraints(bConstrainX, bConstrainY, bConstrainZ); PhysicsConstraintActor.InitConstraint(self, None); } function SetLinearConstraints(bool InConstrainX, bool InConstrainY, bool InConstrainZ) { if(InConstrainX) { PhysicsConstraintActor.ConstraintSetup.LinearXSetup.bLimited = 1; } else { PhysicsConstraintActor.ConstraintSetup.LinearXSetup.bLimited = 0; } if(InConstrainY) { PhysicsConstraintActor.ConstraintSetup.LinearYSetup.bLimited = 1; } else { PhysicsConstraintActor.ConstraintSetup.LinearYSetup.bLimited = 0; } if(InConstrainZ) { PhysicsConstraintActor.ConstraintSetup.LinearZSetup.bLimited = 1; } else { PhysicsConstraintActor.ConstraintSetup.LinearZSetup.bLimited = 0; } } DefaultProperties { bConstrainRotation=true bConstrainX=false bConstrainY=false bConstrainZ=false bSafeBaseIfAsleep=false bNoEncroachCheck=false } Here's the code I use to spawn one. It's a subclass of the one above, but it doesn't reference the constraint at all. local QuadForceKCreateBlock BlockActor; BlockActor = spawn(class'QuadForceKCreateBlock', none, 'PowerCreate_Block', BlockLocation(), m_PreparedRotation, , false); BlockActor.SetDuration(m_BlockDuration); BlockActor.StaticMeshComponent.SetNotifyRigidBodyCollision(true); BlockActor.StaticMeshComponent.ScriptRigidBodyCollisionThreshold = 0.001; BlockActor.StaticMeshComponent.SetStaticMesh(m_ValidCreationBlock.StaticMesh); BlockActor.StaticMeshComponent.AddImpulse(m_InitialVelocity); I used to initialize an RB_ConstraintActor where I spawned it from the outside. This worked, which is why I'm pretty sure it has nothing to do with the other code in QuadForceKCreateBlock. I then added the internal constraint in QuadForceKActor for other purposes. When I realized I had two constraints on the CreateBlock doing the same thing, I removed the constraint code from the place where I spawn it. Then it started rotating. Is there a reason I should not be initializing an RB_ConstraintActor in PostBeginPlay? I feel like there's some basic thing about how the engine works that I'm missing.

  Read the article

• SFX Played Once per Collision or Hit

  - by David Dimalanta

  I have a question about using Box2D (engine for LibGDX used to make realistic physics). I observed on the code that I've made for the physics here below: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } Now, I'm thinking which part o line should I implement for the sound effects. My objectives to make SFX played once for every collision (Or should I say "SFX played once per collision"?) on the following: SFX played once if they hit on the objects of its kind. (e.g. apple vs. apple) SFX played once on a different sound when it hit on the ground. (e.g. apple land on the mud) Take note that I'm using Box2D for the Java programming version thanks to LibGDX via Box2D engine and I edited the physics body using Physics Body Editor before I implement it to code. I tried to check every available methods for body, fixture definition, or body definition to code for the SFX when hit but it seems only for the gravity and weight. Is there possibly available on the document for SFX played when collision happens if possible?

  Read the article

• Upgrading 10.04LTS -> 10.10 using custom sources

  - by Boatzart

  I'm trying to upgrade to 10.10 from 10.04 LTS using a custom sources.list file that points to an unofficial mirror*. The mirror does have maverick, but I get the following output when upgrading: boatzart@somecomputer: > sudo do-release-upgrade Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file No valid mirror found While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'lucid' to 'maverick' entries. If you select 'No' the upgrade will cancel. Continue [yN] y WARNING: Failed to read mirror file 96% [Working] Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Here is the relevant section from /var/log/dist-upgrade/main.log: 2010-11-18 14:05:52,117 DEBUG The package 'update-manager-kde' is marked for removal but it's in the removal blacklist 2010-11-18 14:05:52,136 ERROR Dist-upgrade failed: 'The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.' 2010-11-18 14:05:52,136 DEBUG abort called *I'm located inside of USC, and for some crazy reason any sustained downloads to anywhere outside of the University are throttled down to 5kbps inside of my lab. Because of this I need to use the following sources.list: deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-updates main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-backports main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-security main restricted universe multiverse I've tried adding four more entries to the sources.list with s/lucid/maverick/ but that didn't help. Does anyone know how to fix this? Thanks!

  Read the article

• What should filenames and URLs of images contain for SEO benefit?

  - by Baumr

  We know that good site architecture usually looks like this: example-company.com/ example-company.com/about/ example-company.com/contact/ example-company.com/products/ example-company.com/products/category/ example-company.com/products/category/productname/ Now, when it comes to Google Image search, it is clear that the img alt tag, filename/URL, and surrounding text (captions, headings, paragraphs) have an effect on ranking. I want to ask about the filename of the images that we should use (e.g. product-photo.jpg). ...but first about the URL: Often web developers stick all images in a single folder in the root: example-company.com/img/ — and I have stopped doing that. (I don't want to get into it, but basically, it seems more semantic for images which make up part of the content at each sub-directory) However, when all images appear in a folder, I feel that their filename needs to reflect what they are a bit more than usual, for example: example-company.com/img/example-company-productname-category.jpg It's a longer filename than just product.png, but as long as it's relevant, I see no problem with regards to SEO (unless you're keyword stuffing), and it could even help rank for keywords: "example company" "productname" "category" So no questions there. But what about when we have places images in the site architecture we outlined at the beginning? In other words, what if image URL paths look like this: example-company.com/products/category/productname/productname.jpg My question is, should the URL be kept short like above and only have the "productname" (and some descriptive keywords) as part of it's filename? Or, should it also include the "example-company" and "category"? Like so: example-company.com/products/category/productname/example-company-category-productname.jpg That seems much longer, and redundant when we look at the URL, but here are a few considerations. Images are often downloaded onto computers, and, to the average user, they lose their original URL and thus — it isn't clear where they came from. Also, some social networks, forums, and other platforms leave the filename intact when uploaded. (Many others rewrite it, for example, Pinterest and Facebook.) Another consideration, will this really help (even if ever so slightly) rank in Google Image Search, or at least inform Google that the product is something specific to the "example-company"? For example, what if this product can only be bought at this store and is the flagship product? In addition to an abundance of internal links to this product page, would having the "example company" name and "category" help it appear in "example company" searches? In other words, is less more?

  Read the article

• No client internet access when setting up these iptables rules

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Why would you dual-run an app on Azure and AWS?

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/11/10/why-would-you-dual-run-an-app-on-azure-and-aws.aspxI had this question from a viewer of my Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS, and thought I’d publish the response. So why would you dual-run your cloud app by hosting it on Azure and AWS? Sounds like a lot of extra development and management overhead. Well the most compelling reasons are reliability and portability. In 2012 I was working for a client who was making a big investment in the cloud, and at the end of the year we published their first external API for business partners. It was hosted in Azure and used some really nice features to route back into existing on-premise services. We were able to publish a clean, simple API to partners, and hide away the underlying complexity of the internal services while still leveraging them to do all the work. Two days after we went live, we were hit by the Azure SSL certificate expiry outage, and our API was unavailable for the best part of 3 days. Fortunately we had planned a gradual roll-out to partners, so the impact was minimal, but we’d been intending to ramp up quickly, and if the outage had happened a week or two later we would have been in a very bad place. Not least because our app could only run on Azure, we couldn’t package it up for another service without going back and reworking the code. More recently AWS had an issue with a networking device in one of their data centres which caused an outage that took the best part of a day to resolve. In both scenarios the SLAs are worthless, as you’ll get back a small percentage of your cloud expenditure, which is going to be negligible compared to your costs in dealing with the outage. And if your app is built specifically for AWS or Azure then if there’s an extended outage you can’t just deploy it onto a new set of kit from a different supplier. And the chances are pretty good there will be another extended outage, both for Microsoft and for Amazon. But the chances are small that it will happen to both at the same time. So my basic guidance has been: ignore the SLAs, go for better uptime by using two clouds. As soon as you need to scale beyond a single instance, start by scaling out to another cloud. Then scale out to different data centres in both clouds. Then you’ve got dual-cloud, quadruple-datacentre redundancy, so any more scaling you need can be left to the clouds to auto-scale themselves. By running in both clouds, you’ve made your app portable, so in the highly unlikely event that both AWS and Azure go down in multiple regions, you’ll have a deployment package which will let you spin up a new stack on yet another cloud, without having to rework your solution.

  Read the article

• Workflow 4.5 is Awesome, cant wait for 5.0!

  - by JoshReuben

  About 2 years ago I wrote a blog post describing what I would like to see in Workflow vnext: http://geekswithblogs.net/JoshReuben/archive/2010/08/25/workflow-4.0---not-there-yet.aspx At the time WF 4.0 was a little rough around the edges – the State Machine was on codeplex and people were simulating state machines with Flowcharts. Last year I built a near- realtime machine management system using WF 4.0.1 – its managing the internal operations of this device: http://landanano.com/products/commercial   Well WF 4.5 has come a long way – many of my gripes have been addressed: C# expressions - no more VB 'AndAlso' clauses state machine awesomeness - can query current state many designer improvements - Document Outline is so much more succinct than Designer! Separate WCF Service Contract interfaces and ability to generate activities from contract operations ability to rehydrate to updated flow definitions via DynamicUpdateMap and WorkflowIdentity you can read about the new features here: http://msdn.microsoft.com/en-us/library/hh305677(VS.110).aspx   2013 could be the year of Workflow evangelism for .NET, as it comes together as the DSL language. Eg on Azure it could be used to graphically orchestrate between WebRoles, WorkerRoles and AppFabric Queues and the ServiceBus – that would be grand.   Here’s a list of things I’d like to see in Workflow 5.0: Stronger Parallelism support for true multithreaded workflows . A Workflow executes on a single thread – wouldn’t it be great if we had the ability to model TPL DataFlow? Parallel is not really parallel, just allows AsyncCodeActivity.     support for recursion an ExpressionTree activity with an editor design surface a math activity pack return of application level protocol (3.51 WF services) – automatically expose a state machine as a WCF service with bookmark Receive activities generated from OperationContract automatically placed in state transition triggers. A new HTML5 ActivityDesigner control – support with different CSS3  skinnable hooks,  remote connectivity (had to roll my own) A data flow view – crucial to understanding the big picture Ability to refactor a Sequence to custom activity in a separate .xaml file – like Expression Blend does for UserControl state machine global error handling - if all states goto an error state, you quickly get visual spagetti. Now you could nest a state machine, but what if you want an application level protocol whereby each state exposes certain WCF ops. DSL RAD editing - Make the Document Outline into a DSL editor for adding activities  – For WF to really succeed as a higher level of abstraction, It needs to be more productive than raw coding - drag & drop on the designer is currently too slow compared to just typing code. Extensible Wizard API - for pluggable WF editor experience other execution models beyond Sequence, Flowchart & StateMachine: SSIS, Behavior Trees,  Wolfram Model tool – surprise us! improvements to Designer debugging API - SourceLocation is tied to XAML file line number and char position, and ModelService access seems convoluted - why not leverage WPF LogicalTreeHelper / VisualTreeHelper ? Workflow Team , keep on rocking!

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >