Search Results

Search found 32520 results on 1301 pages for 'local machine'.

Page 219/1301 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• Why are my USB 2.0 devices crashing Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Can only access asp.net app on localhost

  - by Kevin Donn

  I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

  Read the article

• Linux Startup Script after Gnome Login

  - by Eric

  I have a Fedora server that I want to spawn an interactive python script after the user logs on. This script will ask the user for various types of information for configuring the system or it will search for the previous config file and show them the predefined information. Originally I was going to put this in rc.local or make it run with init.d but that messed up the boot due to how the script is spawned. So I would like this script to run as soon as the user logs in to Gnome. I've searched around quite a bit and found this answer which appears to be exactly what I want, but it isn't working the way I want it to. Below is my entry. [Desktop Entry] Name=MyScript GenericName=Script for initial configuration Comment=I really want this to work Exec=/usr/local/bin/myscript.sh Terminal=true Type=Application X-GNOME-Autostart-enabled=true Whenever I login, nothing happens. So I then did a test to modified "myscript.sh" to just echo some text to a file and it worked fine. So it appears the portion that isn't working is the script popping open a terminal and waiting for the users input. Are there any additional options I need to add to make this work? I can confirm when I run /usr/local/bin/myscript.sh from the CLI it works fine. I have also tried adding "StartupNotify=true" and still no luck. Edit @John - I tried moving my Exec= to /usr/local/bin/myscript-test and this is what myscript-test contains. #!/bin/bash xterm -e /usr/local/bin/myscript.sh Yet again, when I just run the myscript-test it works fine. However when I put that in my autostart, nothing happens. Edit 2 - I did a few more tests and it did start working but I had to remove Terminal=True before the xterm would pop. Thanks for your help.

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• "Exchange Management Console" 2007 can't connect to Active directory on load : get-ExchangeServer

  - by Dragouf

  Since a little time I can't use Exchange Management Console on an exchange 2007 server because of a message which tell me that get-ExchangeServer return that active directory of my server is available. My config is : Windows server 2008 sp2 wit roles : DNS IIS Active Directory RAS and Exchange server 2007. Here is a screenshot of the error message (I run windows server 2008 french edition sorry) : in english : The following error(s) were reported while loading topology information: get-ExchangeServer Failed Error: Active Directory server <theserver> is not available. Error message: A local error occurred. A local error occurred. get-UMServer Failed Error: Active Directory server <theserver> is not available. Error message: A local error occurred. A local error occurred. Anyone know from where this problem is comming and how to resolve it ?

  Read the article

• Windows 7 Slow Searching

  - by Guy Thomas

  I have a new Windows 7 machine with twice as much RAM and a faster processor than my old Windows Server 2008 R2 Machine. I am disappointed that searching amongst my 10,000 image files takes twice as long on my new Windows 7 machine. Both machines have their own copy of these same files. In other respects e.g. opening my huge Outlook files, the new machine is faster. The Windows Search Service has started. And I set indexing on the image folder about 3 days ago. Any ideas why I suffer from this poor index / search experience? Other than adding / removing folders, is there anything I can do to tweak indexing?

  Read the article

• How to Solve the "Unidentified network" in Windows 7

  - by gylns

  I connect the internet through Ad-hoc network, My machine uses win7 and another uses winows xp, There's no problem when I connect the XP machine, but if i disconnect and reconnect the net, then my local network is marked as "Unidentified network",unless restart the XP machine, I don't know why?

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• Start frei für die Exadata Community im neuen Look!

  - by Frank Schneede (Exadata Community)

  Endlich ist es soweit! Pünktlich mit dem Start der DOAG Konferenz 2012, die vom 20.11. - 22.11.2012 in Nürnberg stattfindet, geht die Deutsche Exadata Community in völlig neu gestaltetem Outfit an den Start. Sie werden hier regelmäßig über neue Ankündigungen sowie Tipps und Tricks im Umgang mit Exadata informiert. Durch das freiere Blogformat werden an dieser Stelle auch Berichte über Exadata Projekte erscheinen, die besonders hervorhebenswert sind. Ich denke, Sie dürfen gespannt sein! Vieles hat sich seit dem letzten Update in der Community getan, denn auf der diesjährigen Oracle Open World in San Franzisco wurde eine ganze Reihe spannender Ankündigungen rund um Exadata gemacht. Die kürzlich vorgestellten Modelle Exadata Database Machine X3-2 und X3-8 sind in der grundlegenden Architektur zwar unverändert geblieben, jedoch sind die Modelle mit aktuellen Prozessoren in SandyBridge Mikroprozessorarchitektur noch leistungsfähiger als bisher. Der vierfach vergrößerte Flash Cache nimmt wesentlich mehr Daten auf und macht die Exadata so zur "In-Memory" Database Machine. Mit der neuen Exadata Software 11.2.3.2 kann der Flash Cache nun als persistenter Write Back Flash Cache verwendet werden. Durch das neuartige Caching profitieren auch OLTP Applikationen, die eine hohe Last von schreibenden Transaktionen verursachen, stärker von der Exadata Technologie. Ein neues Einstiegsmodell, das Exadata X3-2 Eighth Rack, vervollständigt die Produktfamilie und senkt abermals die Einstiegshürde für die Kunden.  Die beiden Community Tipps zur Exadata Hardware wurden aktualisiert. Lesen Sie alles über die Exadata Database Machine X3-2 und deren große Schwester, die Exadata Database Machine X3-8.

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Photo organization software

  - by Aaron

  I am looking for photo organization software for family albums that meets the following requirements: Online Gallery Synchronized Searchable Access Controls Local Copies Synchronized Searchable Multiple individuals Multiple people have local copies All can contribute to tagging It syncs additions/changes/tags to the online gallery, which in turn syncs to other local copies Powerful Tagging Entity based (support multiple people with the same name) Multiple Types of Tags (People, Pets, Things) Coordinate or Full Image Tag can focus on certain area in picture, or reference the full picture Facial Recognition Does anyone know of a piece of software like this? I will pay!!!

  Read the article

• "log on as a batch job" user rights removed by what GPO?

  - by LarsH

  I am not much of a server administrator, but get my feet wet when I have to. Right now I'm running some COTS software on a Windows 2008 Server machine. The software installer creates a few user accounts for running its processes, and then gives those users the right to "log on as a batch job". Every so often (e.g. yesterday at 2:52pm and this morning at 7:50am), those rights disappear. The software then stops working. I can verify that the user rights are gone by using secedit /export /cfg e:\temp\uraExp.inf /areas USER_RIGHTS and I have a script that does this every 30 seconds and logs the results with a timestamp, so I know when the rights disappear. What I see from the export is that in the "good" state, i.e. after I install the software and it's working correctly, the line for SeBatchLogonRight from the secedit export includes the user accounts created by the software. But every few hours (sometimes more), those user accounts are removed from that line. The same thing can be seen by using the GUI tool Local Security Policy > Security Settings > Local Policies > User Rights Assignment > Log on as a batch job: in the "good" state, that policy includes the needed user accounts, and in the bad state, the policy does not. Based on the above-mentioned logging script and the timestamps at which the user rights are being removed, I can see clearly that some GPOs are causing the change. The GPO Operational log shows GPOs being processed at exactly the right times. E.g.: Starting Registry Extension Processing. List of applicable GPOs: (Changes were detected.) Local Group Policy I have run GPOs on demand using gpupdate /force, and was able to verify that this caused the User Rights to be removed. We have looked over local group policies till our eyes are crossed, trying to figure out which one might be stripping these User Rights to "log on as a batch job." We have not configured any local group policies on this machine, that we know of; so is there a default local group policy that might typically do such a thing? Are there typical domain policies that would do this? I have been working with our IT staff colleagues to troubleshoot the problem, but none of them are really GPO experts... They wear many hats, and they do what they need to do in order to keep most things running. Any suggestions would be greatly appreciated!

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• Media Drive Permissions

  - by Wade Wofford

  I just switched from a Hackintosh to Linux, and am trying to make sense of it. On my hackintosh, I partitioned a big drive into 3 parts--1 which holds music, 1 for film/tv, and one for the OS. I installed Ubuntu onto the OS partition, and am now trying to make it so I can write to the media drives. I've searched around and tried several things. I tried gksu nautilus in Terminal, which brought me into root permissions. When I select a folder and try to change permissions, I get "The owner could not be changed...Error setting owner: Read-only file system" Ultimately, I have two specific aims: - I want to make it so I can write to the film/tv drive from the ubuntu machine only - I want to make it so I can write to the music drive from the ubuntu machine, or any other machine on the network (all Macs). That is, I want a single music library (an iTunes file) that will serve all Mac laptops/iPads/iPhones on the network, but which XBMC on the Ubuntu machine can also see / read from. Music will be added to the iTunes library via a single Mac laptop, but all other devices should be able to see the music drive.

  Read the article

• Will my internet address for my internal site cause my traffic to go external?

  - by Toby Allen

  If I have two domains pointing to the same machine, but one resolves to an internal address and the other to my internet facing router, will there be any differnce in route taken to my machine (primarily in terms of performanc). eg. internal.mydomain.com resolves to 192.168.1.200 external.mydomain.com resolves to A.Web.External.IP both eventually resolve back to the same machine. For a client in the network, will using the external address give a performance penalty?

  Read the article

• BGP Dual-As support, any RFC?

  - by Saran

  Generally most of routers like cisco and junos allow a router to have dual-As to be configured via a "local-as" command which overrides the global as-number configured in "router bgp ". Also local-as prepending may or may not happen based on configurations; for example "no-prepend" in cisco. Now my question is, is there any RFC which which standardises this Dual-As support?? Which provides guidelines on whether or not to prepend the "local-as" to As-Path attributes in the Bgp updates ?

  Read the article

• How to setup firewall to allow internet connection sharing via Wifi USB stick?

  - by hannanaha

  I have a Windows8 computer linked to the internet via an ethernet cable ("Ethernet" network connection). I have attached to it a DLink Wifi USB stick, and I'm trying to share the main PC's internet connection with my Android phone via a local wifi network. I am using the following batch file to set up this network: netsh wlan set hostednetwork mode=allow ssid=MyWifiName key=password keyUsage=persistent netsh wlan start hostednetwork After I run this script, I can see a new network connection appear in "Control Panel\Network and Internet\Network Connections" named "Local Area Connection *12", and I can see "MyWifiName" on the Android phone. The device name for this connection on the PC is "Microsoft Hosted Network Virtual Adapter". I also set up the "Ethernet" connection to share Internet with "Local Area Connection *12". However, the Android phone usually doesn't manage to obtain an IP from the wireless network, and when it does, there still seems to be no connectivity to the internet. When I turn off the Windows Firewall completely, or even just for "Local Area Connection *12", the Android connection is perfect. My questions are: How should I set up the Windows firewall to allow the phone to connect properly? Is there a specific rule I need to add to the Windows firewall advanced settings? [Note: the above method worked great in Windows 7, without any specific tinkering with the firewall]. Is it safe to turn off the firewall specifically for the "Local Area Connection *12" (the wifi connection) if the main Ethernet connection is still protected by the firewall? Thanks in advance.

  Read the article

• Offline Domain Join Windows Server 2003

  - by Chris Dwyer

  I have a Windows 2008 R2 domain, and I need to join a Windows Server 2003 machine to the domain. I have also lost any local user passwords to the 2003 machine. Can I use Offline Domain Join to add the 2003 machine to the 2008 domain?

  Read the article

• In AD how to get groups the workstation is a member of from the workstation itself?

  - by David

  If I'm at the domain controller (in the Active Directory) to find out what groups the "XPSP3-A" workstation is a member of, I do: dsquery computer "CN=XPSP3-A,CN=Computers,DC=pvk,DC=local" -name XPSP3-A | dsget computer -memberof and receive the following: "CN=Sec Group 001,OU=OU1,DC=pvk,DC=local" "CN=Domain Computers,CN=Users,DC=pvk,DC=local" But how to do the same from the "XPSP3-A" workstation?

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Moving Microsoft Exchange server to the private network.

  - by Alexey Shatygin

  In one of the offices, we have a 50-computers network, which had only one server machine: Windows 2003 Server Microsoft ISA Server Microsoft Exchange 2003 This server worked as a gateway (proxy server), mail server, file server, firewall and domain controller. It had two network interfaces, one for WAN (let's say 222.222.222.222) and one for LAN (192.168.1.1). I set up a Linux box to be the gateway (without a proxy), so the Linux box now has the following interfaces: 222.222.222.222 (our external IP, we removed it from the Windows machine) and 192.168.1.100 (internal IP), but we need to keep the old Windows server as a mail server and a proxy for some of our users, until we prepare another Linux machine for that, so I need the mail server on that machine to be available from the Internet. I set up iptables rules to redirect all the incoming connections on the 25th and 110th ports of our external IP to 192.168.1.1:25 and 192.168.1.1:110 and when I try to telnet our SMTP service telnet 222.222.222.222 25 I get the greetings from our windows server's (192.168.1.1) SMTP service, and that's works fine. But when I telnet POP3 service telnet 222.222.222.222 110 I only get the blank black screen and the connection seem to disappear if I press any button. I've checked the ISA rules - everything seems to be the same for 110th and 25th ports. When I telnet on 110th ports of our Windows server from our new gateway machine like this: telnet 192.168.1.1 110 I get the acces to it's POP3 service: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (...) ready. What sould I do, to make the POP3 service available through our new gateway?

  Read the article

• munin transmission plugin, I get per error

  - by Sandro Dzneladze

  Could you please tell me what this error says?: Can't locate JSON/RPC/Client.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at ./transmission_ line 3. BEGIN failed--compilation aborted at ./transmission_ line 3. This is a perl plugin for munin system monitoring tool. I'm using ubuntu server 12.04

  Read the article

• XP Missing AD in secuirity location

  - by Rodent43

  I have a few Window XP clients that are part of a domain, when trying to set the permissions on the security tab and pressing location to search the AD for users it only presents the local machine... So I follow this path Right click folder Properties Security Add in the locations field where I would normally see the windows domain, I am only seeing the local machine name??? So only users that have a local account can be added to the folders permissions... Any tips would be appreciated

  Read the article

• How to troubleshoot ping request time out [closed]

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >