Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 219/279 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• sniffing on a switched LAN

  - by shodanex

  Hi, I often find myself in the position of having to sniff on a connection between for example an arm board I am developing on, and another computer on the network, or out of the network. The easy situation is when I can install a sniffer on the computer talking to the embedded device. When it is not possible, I currently install an old 10Mb/s HUB. However I am afraid my HUB might stop working, and I would like to know some alternative. Here are the alternatives I could think of : Buy another HUB. Is that still possible ? Have some sort of ethernet sniffing bridge, like what they do for USB. I am afraid this kind of device is expensive. use ARP poisoning.

  Read the article

• Slow boot for OS and external devices

  - by Derek Van Cuyk

  I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

  Read the article

• Gateway NE56R & mouse swipe gesture...how to disable?

  - by Anders

  Can anyone tell me how to shut off the swipe gesture mechanism on my computer? It's driving me crazy. I cannot use a single application without having my computer screen minimize every time I move my hand over the mouse following a mouse-click, pointer movement, etc. Having to maximize my spreadsheets, documents, and applications so much is undercutting my productivity. How some software engineer/inventor imagined that this mouse/gesture swipe gimmick would be helpful to computer users is inconceivable to me. It is a massive annoyance. I've found instructions online for disabling this obnoxious feature, but all the instructions involve messing with my registry, which I don't want to do. I will be SO GRATEFUL to any techie who can tell me how to disable this horrible mouse swipe mechanism without having to alter my registry! I'm using a Gateway NE56R Notebook, Windows 7 operating system, and an Inland USB Mouse (model no. 37535). Thank you in advance!

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Input devices stopped working during system upgrade

  - by amorfis

  Hi, I was upgrading Ubuntu on my server (but Ubuntu is in desktop version) when mouse and keyboard stopped working :( So the screen went black (screensaver), and now I can't do anything. I don't know what stage of upgrade it stopped working, probably now it waits for me to answer some question. Keyboard and mouse were connected by KVM, connecting them directly doesn't help. Both are on USB. What I can do, is connecting to the machine by ssh. Can I somehow see and answer questions of update system and somehow finalize process of upgrade?

  Read the article

• Windows 7 restarts while being idle

  - by Ondrej Slinták

  My Windows 7 almost always restarts when I keep it idle for ~20-30mins. It happened randomly before, but lately, if I leave the computer I can be sure it's gonna restart after those 30mins. It never happens when I play games or work tho, just when it's idle. It's a fresh install of Windows 7 64bit. I had also problems while installing it, it always crashed while finalizing the install and I had to reinstall again. Eventually it installed on 3rd or 4th try after I deleted all of my partitions and added them again. I thought it might have been a hardware problem, but temperatures seem to be okay and I have no idea how to track what might have been causing it. Any ideas? I'm running Windows 7 64bit on: Gigabyte EX58-UD4P Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz NVIDIA GeForce GTX 260 6GB of DDR3 1066Mhz RAM WDC WD1001FALS-00J7B0 1TB SATA II I have a very bad feeling it might be something with HDD and its compatibility with Windows 7 as I haven't had those problems for 1 year while I had Vista.

  Read the article

• Windows 7 - User profile corrupted on standby/hibernate

  - by Dogbert

  I have a friend who uses Windows 7 for her home PC. She has a RAID1 array that is using up-to-date Intel Matrix storage drivers, and the entire array is backed up to a separate internal SATA HDD via Acronis True Image every night. Over the weekends, she lets her machine go into suspend after 4 hours of inactivity, and then later into hibernation after 6 hours of inactivity. Her Acronis backup system does nightly incremental backups, and full backups every Saturday night. She also has AVG Free Antivirus installed which does full scans every Monday. So far, on two occasions, on Sunday morning, her user profile is corrupt. I couldn't find any solution that allowed me to repair her profile, so I end up having to (as suggested by MS Knowledge Base, http://windows.microsoft.com/en-us/windows7/fix-a-corrupted-user-profile ;, Yep, no solution to fixing it, just clobber the whole thing) recreating her profile, then copying over data, recreating her Outlook profile, reconfiguring all third-party applications, etc. It's a real nightmare, and takes 4 hours to do each time. Are there any suggestions on how to resolve this profile corruption? This was happening even before the RAID/Acronis solution was in place, but I thought I'd provide as much information as possible.

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• Installing VMware ESXi 4.0 on Dell 1950: Cannot open vmkboot.gz

  - by rlandster

  I am trying to install VMware ESXi 4.0.0 U1 on a Dell 1950 server via a bootable CD-ROM. I keep getting this error right at the start: Cannot open vmkboot.gz I checked that the CD-ROM drive is not to blame by installing Debian Etch using that drive. I tried several different versions of ESXi (3.5, 3.5 Dell edition, 4.0 Dell edition) and they all give me an error at the same place. I also tried installing from a USB "thumb" drive but got the same error. I checked with the VMware HCL (Hardware Compatibility List) and the Dell 1950 is listed as being compatible. Here are some server details: Two 1.6 GHz Xeon 5110 CPUs (ID: 06-0F-B) BIOS version 2.2.6 Any ideas on what might be the issue?

  Read the article

• How to do simple multitasked loop processing over filenames with PowerShell?

  - by Ville Koskinen

  I'm batch transcoding some 50 GB of video files on a USB hard disk which is connected to a wlan router. The drive is mapped as a network drive on my Windows 7 laptop. The speed handicap of the wlan causes some parts of the processing to become unnecessarily slow, so I would like to do the following with PowerShell: List the names of the files on the network drive to be transcoded Copy the first file to a temporary folder on my laptop Simultaneously Transcode the file in the folder Begin copying the next file from the network drive to the temporary folder After transcoding and copy have both ended, Delete the file which has been transcoded from the temporary folder Begin transcoding next file in the temporary folder Loop until all files have been processed How would I be able to do this with PowerShell? The multitasking part is an obstacle for my skill/persistence combination.

  Read the article

• Linux for a laptop? [closed]

  - by spriteless

  I would like to install Linux on a laptop. So I have emptied the hard drive, and can boot off a CD. So far I have failed to format the hard drive to Linux, to install Linux, and to change it so that I don't have to hit escape when loading in order to boot from CD (or get Linux on the hard drive and boot to it). The old laptop has 640 MB RAM, 600*800 screen, a CD drive and USB mouse and floppy drives. I eventually mean to use it to look at PDFs if possible, or RTFs that I converted from PDFs if not.

  Read the article

• Erase all traces of Windows 8

  - by user1032531

  Just bought a new HP pavilion desktop with Windows 8. I wish to totally remove Windows 8 and all data on the hard drive, remove any windows partitions, delete all data, and then install a fresh Linux. Problem is I can seem to get to boot from USB or boot from CD. It appears that Windows 8 added the following two "features": UEFI which substitutes what we have known as the BIOS Secure Boot which prevents anything but the installed operating system How do I completely and totally erase all traces of Windows 8? Is it still possible to reformat the hard drive? I don't want a duel boot, I don't want to go back to Windows 7, I just want anything Windows gone.

  Read the article

• hard drive recognized by bios but not by windows

  - by tehgeekmeister

  I'm adding a new hard drive (A seagate ST31000340NS; I had links in here but I don't have enough reputation to post them. Interestingly, the bios recognizes it as a ST31000340AS, but it was bought as the other number...) to a friend's hp pavilion d4650e (mobo specs; google the model if you want the rest of the info, can't do more than one link.). Have had a hell of a time with it. Finally figured out that the hard drive needed a jumper set to limit the speed to 1.5gbps so the mobo would recognize it, and the bios DOES recognize it now. But not windows (using windows 7), using add new hardware or diskmgmt.msc. According to my friend, who was at the computer when it first booted after adding the jumper, a new hardware found dealio popped up saying something about raid, but I can't provide more info then that since I didn't see it. Ubuntu livecd recognized the drive before we changed the jumper. Haven't checked since then. XP didn't recognize it, that's the OS we started with. Upgraded to 7 hoping it might fix the problem. The only other info I can think of that might be immediately relevant is that the drive is plugged into the fifth sata channel, and the first channel is empty. Is this a problem? I assume not, because the two other drives (in a raid 0) and the cd and dvd drives are also on channels past the first one, and are recognized. Ask questions and I'll update with info!

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

• Electricity in VAIO laptop ports while plugged in

  - by SRbH

  I have VAIO E series (SVE) laptop. While charger plugged in, touching VGA/HDMI/USB port metal casing gives me burning sensation. So, i checked it with voltmeter and i found that while plugged in there is presences of DC +1.0 V. Same case with my friend's VAIO E Series (VPCEH). Service center says this is normal. But i do not believe them as it is not the case with Dell Inspiron. Please let me know if you are facing same problem with VAIO and is it hazardous to devices which i connect to these ports (like HDD, LED, etc)?

  Read the article

• Understanding the Linux boot process, subsystem initialization, & udev rules?

  - by quack quixote

  I'm creating UDEV rules for automounting external drives on a headless server, much in the same way as Gnome-VFS does automounting during a user session. I'm concerned with the rule's behavior at boot-time. There's a good chance one of these drives will be connected during a boot, and I'd prefer any connected drives get mounted in the right place. The drives might be either USB or Firewire, and they are mounted from a shell script fired off by UDEV on detecting an "add". Here are my questions: When UDEV runs the mount for these devices at boot, will the system be ready to mount it? Or will the script get triggered too early? If it's too early, what's a good way for a script to tell that the system isn't ready yet (so sleep a while before checking again)? The UDEV rule matches ACTION=="add". Does this event even fire at system boot?

  Read the article

• Navigation keys on numeric keypad randomly stop working

  - by Tom Hughes

  Shortly after a restart, the arrow and navigation (Home, End...) keys on my numeric keypad will randomly stop working, and -- regardless of the state of the NumLock -- return only numbers. I notice this the most in browser applications (like this edit box) but the same effect is true on the command line and in desktop applications like Word. I swapped keyboards and now use a Microsoft keyboard (both are USB keyboards) but the same behavior persists. I also tried a clean boot to clean out startup programs but this made no difference. The separate arrow keys and navigation keys between the QWERTY keys and the numeric keypad work fine, but my strong preference (dating back to DOS and MS Flight Simulator) is to use the navigation keys in the numeric keypad.

  Read the article

• Backup software for Windows Server 2008 R2 Enterprise with 4 virtual machines (Exchange, SQL, AD, SharePoint)

  - by MadBoy

  What are the options for backup software for: HOST - Windows Server 2008 R2 Enterprise with HyperV VIRTUAL - Windows Server 2008 R2 Enterprise with Exchange 2010 VIRTUAL - Windows Server 2008 R2 Enterprise with SQL Express / SharePoint VIRTUAL - Windows Server 2008 R2 Enterprise with Terminal Services (10 users working on it) VIRTUAL - Windows Server 2008 R2 Enterprise with AD/DNS What I'm looking at is possibility of having an offsite backup thru FTP, maybe copy to usb/esata/lan drives for easy taking backup data outside of company. What I've been looking at: - Symantec Exec Backup 2010 System Recovery has an offsite backup but I would need 5 licenses and it doesn't have granular recovery. - Symantec Exec Backup 2010 seems OK but a bit expensive - Microsoft DPM 2010 requires full SQL Standard and for each machine I would need 4 Enterprise licenses. But does it allow Offsite backup without need for additional license and server outside of company (for doing DPM backup of DPM). What other options? This is 10 people company and so the costs matter but also convenience and security. Offsite backup is requirement.

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Building a PC, advice on SSD/Hybrid Hard Drives

  - by Jamie Hartnoll

  I am looking at building a new PC, it's mainly for office (graphics heavy) use and programming. Looking for good performance with opening and closing programs and files as well as a fast boot. I plan to have 3 primary hard drives Windows 7 Programs (photoshop etc) Current Files (There'll also be a large storage capacity back up drive, but this will be the Seagate drive I already have.) So, my question is, looking at standard "old fashioned" hard drives and SSD drives, obviously there's a massive price difference. I have been looking at drives like this: http://www.ebuyer.com/268693-corsair-120gb-force-3-ssd-cssd-f120gb3-bk-cssd-f120gb3-bk and this: http://www.ebuyer.com/321969-momentus-xt-750gb-sata-2-5in-7200rpm-hybrid-8gb-ssd-in-st750lx003 Having no experience of using either I don't know what's the most efficient thing to go for. Clearly the SSD will have better performance, but: If, for example, I had an SSD for Windows (say about 100gB), that would clearly give me the boot speed I want, then I guess my real questions are: If I were to buy one more SSD, would it give the greatest improvement on standard performance if used to store programs, or currently used files? Given that the OS is on an SSD, should I not bother with the 3 drives and instead, partition that Hybrid drive to store programs and currently used files on it? Obviously, option two is cheaper and option one could cause me storage issues, but that's when I can dump files I am not currently using onto another drive. Any, I am open to suggestions... so what do you suggest?!

  Read the article

• Supermicro SmartOS setup issue with HDDs

  - by Andrew B.

  I'm trying to setup SmartOS on my new Supermicro server (SYS-6027R-N3RF4+). I have 8 HDDs + 2 SSDs installed in the hot-swappable drive bays. I have not configured the Intel RAID controller on the machine (it shows no RAID configured, and lists all 8 HDDs). When I boot SmartOS from my USB key for the first time and get to the initial zpool creation I only see 2 disks listed. How can I tell which two drives are being referenced? How can I get SmartOS to recognize all 8+2 drives? Is there a BIOS setting I need to adjust?

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Using a KVM with a Sun Ultra 45

  - by Kit Peters

  I have a friend with two machines: a Mac and a Sun Ultra45. He wants to use a single monitor (connected via DVI) and USB keyboard / mouse with both machines. Try as I might, the Sun box will not bring up a console if the KVM is connected. However, if I connect a monitor, keyboard, and mouse directly to the Sun box, it will bring up a console that I can then (IIRC) connect to the KVM. Is there any way I can make the Sun box always bring up a console, regardless of whether it "sees" a monitor, keyboard, and mouse?

  Read the article

• Is wiper.sh working?

  - by Aleksander Blomskøld

  I'm setting up a server running Ubuntu Precise, and I'm trying to verify if SSD TRIM is working. fstrim is failing: ~ sudo fstrim -v / fstrim: /: FITRIM ioctl failed: Operation not supported So I tried wiper.sh in hdparm: wiper-3.5 sudo ./wiper.sh --verbose --commit /dev/sda1 wiper.sh: Linux SATA SSD TRIM utility, version 3.5, by Mark Lord. rootdev=/dev/sda1 fsmode2: fsmode=read-write /: fstype=ext4 freesize = 169502088 KB, reserved = 1695020 KB Preparing for online TRIM of free space on /dev/sda1 (ext4 mounted read-write at /). This operation could silently destroy your data. Are you sure (y/N)? y Creating temporary file (167807068 KB).. Syncing disks.. Beginning TRIM operations.. get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.11503 /dev/sda: trimming 3211263 sectors from 64 ranges succeeded trimming 3571713 sectors from 64 ranges succeeded trimming 3915776 sectors from 64 ranges succeeded (...) trimming 3657913 sectors from 60 ranges succeeded Removing temporary file.. Syncing disks.. Done. It seems to be working, but I'm wondering if it really is. Are there any cases where wiper.sh should work when fstrim isn't? Is there any way I can check if the TRIMing actually has succeeded (other than trusting the wiper.sh-log)?

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >