Search Results

Search found 11553 results on 463 pages for 'bad programmer'.

Page 22/463 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• C# programmer - necessary to learn C/C++?

  - by Kurresmack

  Hey, I have been programming now for a couple of years. But never any low level language. I started off with some java and some VB. Then I went over to VB.NET and now for a while I have been writing C#. As you see, I have never written any low level language where I had to deal with memory management. Is this something I should do, like a route of passage that every programmer should go through? I am a bit keen on trying to perhaps writing in assembler directly. This would suit me personally good as I have 2 parents that have been writing assembler for ages. Is it necessary for a professional programmer these days to know how to manually manage memory?

  Read the article

• Why is nesting or piggybacking errors within errors bad in general?

  - by dietbuddha

  Why is nesting or piggybacking errors within errors bad in general? To me it seems bad intuitively, but I'm suspicious in that I cannot adequately articulate why it is bad. This may be because it is not in general bad and that it is only bad in specific instances. Why is it detrimental to design error/exception handling in such a way. The specific instance is that of a REST service. There is a desire by some to use http errors (specifically the 500 response) as a way to indicate any problem with specific instances of a resource. An example of an instance resource in this case would be: http://server/ticket/80 # instance http://server/ticket # not an instance So this is the behavior that is being proposed. If ticket 80 does not exist return a http response code of 500. Within the body of the error return the "real" error as an additional error code and description. If the ticket resource doesn't exist return a response code of 404.

  Read the article

• Is there such a thing as a super programmer? [closed]

  - by Muhammad Alkarouri

  Have you come across a super programmer? What identifies him or her as such, compared to "normal" experienced/great programmers? Also. how do you deal with a person in your team who believes he is a super programmer? Both in case he actually is or if he isn't? Edit: Interesting inputs all round, thanks. A few things can be gleaned: A few definitions emerged. Disregarding too localised definitions (that identified the authors or their acquaintance as super programmers), I liked a couple definitions: Thorbjørn's definition: a person who does the equivalent of a good team consistently for a long time. Free Electron, linked from Henry's answer. A very productive person, of exceptional abilities. The explanation is a good read. A Free Electron can do anything when it comes to code. They can write a complete application from scratch, learn a language in a weekend, and, most importantly, they can dive into a tremendous pile of spaghetti code, make sense of it, and actually getting it working. You can build an entire businesses around a Free Electron. They’re that good. Contrasting with the last definition, is the point linked to by James about the myth of the genius programmer (video). The same idea is expressed as egoless programming in rwong's comment. They present opposite opinions as whether to optimise for such a unique programmer or for a team. These definitions are definitely different, so I would appreciate it if you have an input as to which is better. Or add your own if you want of course, though it would help to say why it is different from those.

  Read the article

• I have an MIS degree. How do I sell myself as a programmer?

  - by hydroparadise

  So, I graduated with a BSBA in Management Information Systems with honors almost 2 years ago which is more of a business degree. As of right now, I do have a job title of "Programmer", but it's more of a report writing position in an arbitrary, proprietary language called PowerOn with the occasional interesting project using more mainstream technologies like .Net and Java. I am also somewhat isoloated being the only programmer in the workplace, which I beleive is a detriment to my career path. The only people I have to bounce ideas against are those on the various SE sites. I don't regret going MIS, but over the past couple of years I have discovered my passion for coding, even though I have been doing some form of coding profesionally and as an enthusiast for years. I do want to persue my Masters in CS (at a later time), but I am not sure if I necessarily need a CS degree to get in with a team of programmers. In addition, I do have a number classes I have taken for different laguanges on the way (C++, Java, SQL, and VB.Net) I beleive my strength is in problem solving where code is just a tool to tackling to problem if needed. My question: How do I best sell myself as a programmer? Should I continue pounding out reports and wait till I have my masters in CS? Or am I viable to be a programmer as I stand?

  Read the article

• How much a programmer should read in order to keep himself updated? [closed]

  - by anything

  There are lots of technical books available. Below are few links which lists some good books If you could only have one programming related book on your bookshelf what would it be and why? What non-programming books should a programmer read to help develop programming/thinking skills? Best books on the theory and practice of software architecture? http://stackoverflow.com/questions/1711/what-is-the-single-most-influential-book-every-programmer-should-read ... and the list can go on and on and on. It will be really difficult to read all of the above mentioned books. I am not sure if its even possible for anyone to do that. Even if you filter it based on one's area of interest or work, list is still very large. .. and the technology keeps on changing (even more books :-( ) So, my question is how much a programmer should read lets say per year? How much hours one should put in such activities to keep oneself up to date? How do we find out the time required? PS: Average programmer reads less than one book per year (Code complete). What about the good programmers?

  Read the article

• What is the perfect skill set for a software engineer? [closed]

  - by Sergey

  Of course, except technology stack. I'm asking about more fundamental skills such as design patterns or math. POSSIBLE DUPLICATES: http://stackoverflow.com/questions/76364/what-is-the-single-most-effective-thing-you-did-to-improve-your-programming-skill http://stackoverflow.com/questions/132798/what-should-every-programmer-know http://stackoverflow.com/questions/1177724/what-soft-skills-make-a-great-programmer

  Read the article

• MySQL SSL: bad other signature confirmation

  - by samJL

  I am trying to enable SSL connections for MySQL-- SSL will show as enabled in MySQL, but I can't make any connections due to this error: ERROR 2026 (HY000): SSL connection error: ASN: bad other signature confirmation I am running the following: Ubuntu Version: 14.04.1 LTS (GNU/Linux 3.13.0-34-generic x86_64) MySQL Version: 5.5.38-0ubuntu0.14.04.1 OpenSSL Version: OpenSSL 1.0.1f 6 Jan 2014 I used these commands to generate my certificates (all generated in /etc/mysql): openssl genrsa -out ca-key.pem 2048 openssl req -new -x509 -nodes -days 3650 -key ca-key.pem -out ca-cert.pem -subj "/C=US/ST=NY/O=MyCompany/CN=ca" openssl req -newkey rsa:2048 -nodes -days 3650 -keyout server-key.pem -out server-req.pem -subj "/C=US/ST=NY/O=MyCompany/CN=server" openssl rsa -in server-key.pem -out server-key.pem openssl x509 -req -in server-req.pem -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out server-cert.pem openssl req -newkey rsa:2048 -nodes -days 3650 -keyout client-key.pem -out client-req.pem -subj "/C=US/ST=NY/O=MyCompany/CN=client" openssl rsa -in client-key.pem -out client-key.pem openssl x509 -req -in client-req.pem -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out client-cert.pem I put the following in my.cnf: [mysqld] ssl-ca=/etc/mysql/ca-cert.pem ssl-cert=/etc/mysql/server-cert.pem ssl-key=/etc/mysql/server-key.pem When I attempt to connect specifying the client certificates-- I get the following error: mysql -uroot -ppassword --ssl-ca=/etc/mysql/ca-cert.pem --ssl-cert=/etc/mysql/client-cert.pem --ssl-key=/etc/mysql/client-key.pem ERROR 2026 (HY000): SSL connection error: ASN: bad other signature confirmation If I connect without SSL, I can see that MySQL has correctly loaded the certificates: mysql -uroot -ppassword --ssl=false mysql> SHOW VARIABLES LIKE '%ssl%'; +---------------+----------------------------+ | Variable_name | Value | +---------------+----------------------------+ | have_openssl | YES | | have_ssl | YES | | ssl_ca | /etc/mysql/ca-cert.pem | | ssl_capath | | | ssl_cert | /etc/mysql/server-cert.pem | | ssl_cipher | | | ssl_key | /etc/mysql/server-key.pem | +---------------+----------------------------+ 7 rows in set (0.00 sec) My generated certificates pass OpenSSL verification and modulus: openssl verify -CAfile ca-cert.pem server-cert.pem client-cert.pem server-cert.pem: OK client-cert.pem: OK What am I missing? I used this same process before on a different server and it worked- however the Ubuntu version was 12.04 LTS and the OpenSSL version was older (don't remember specifically). Has something changed with the latest OpenSSL? Any help would be appreciated!

  Read the article

• another "SSH connect to host github.com port 22: Bad file number"

  - by Mariusz

  Hello. I have a problem with my first-time ssh connection. Yes, I've already done yours guides, already tried your "Dealing with firewalls and proxies" article and the problem is still occuring. I am using Win7 32bit, Windows Firewall is disabled, haven't any third-party firewalls, ESET Nod32 Antivirus is not blocking any ports, I am not using any PROXY (neither local proxy) . Here goes the logs: Ordinary SSH connection try C:\Users\Mariusz>ssh -vvv [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: connect to address 207.97.227.239 port 22: Not owner ssh: connect to host github.com port 22: Bad file number NCAT connection try C:\Users\Mariusz>ncat github.com 22 Strange connect error from 207.97.227.239 (10013): No error 10013 = WSAEACCES I think that method called "smart-http-support" won't be usable for me because I haven't created repo yet. I have just GIT INIT locally, and finished at step GIT PUSH, which returns the same: ssh: connect to host github.com port 22: Bad file number fatal: The remote end hung up unexpectedly corkscrew method (first article from yours guide) . While PUTTYing (with pageant in bg), after inputing login - an error is occuring (MessageBox): Disconnected: No supported authentication methods available And in terminal such message is printing out: Server refused our key Key I have generated correctly, using ssh-keygen. I tried not method by editing ~/.ssh/config yet because I had thought that because I haven't PUSHed anything to my remote repo so I won't be able to CLONE anything. Method called ssh-forwarding is not for my, cause it "requires access to an external ssh server" and I haven't any at this time. What else could I do? Thanks in advance for any help. Mariusz.

  Read the article

• 502 Bad Gateway error after failed requests using Passenger

  - by Nicolas Buduroi

  I've got a staging server running nginx 1.0.5 using Rails 3.1 under Passenger 3.0.9. The problem is that a request sent just after one where there's an application error return 502 Bad Gateway. To test it I've set up a simple controller with an action that just raise a dummy exception. One request will show the Rails error message and the next one will show nginx 502 Bad Gateway error, then it goes back to the Rails application error, etc. While investigating this problem I've found out that load testing the application (which increase the number of application processes) make that issue disapear. That is until the extra processes are shutdown, then it reappear. I've tried setting the passenger_min_instances option, but doing so doesn't change anything and in this case each time an application error happen one instance is killed while after load testing all instances are kept alive. P.S.: Some people on my team told me that they've seen the 502 error even when there's no application error but I've not been able to reproduce that. Update: Just found out how to display the responses status codes using ab and most of them are 502!

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• Transfer disk contents *without* cloning tools

  - by Chris Cummins

  Is it possible to "clone" a disk which contains programs by performing a copy of all the disk contents (preserving file attributes) from source to destination disk, and unplugging the source disk and changing the drive letter of the destination disk to match that of the source? Context I have a two disk Windows 8 system with a system drive and a data drive. Recently, the data drive developed a number of bad sectors leading to IO errors. I have been sent a replacement drive so I simply need to clone the contents of this data drive onto the replacement. The drive contents include documents & media, user folders (My Documents and related), and some programs (games etc). Problem The problem is that the bad sectors on the source disk causes most disk cloning tools to fail with read errors. Attempted approaches include: Disk clone from live boot environment with Acronis True Image. Fails due to read errors. Disk clone from live boot environment with Clonezilla. Fails due to read errors. Disk clone using Roadkil's Unstoppable Copier. Fails due to hardware timeouts in the HDD (application hangs indefinitely). A straightforward copy from source to destination disk using FreeFileSync (preserving file attributes and metadata). This succeeds. So at the moment I have a replacement disk which contains all of the data from the original disk. Now all I need to is somehow get Windows to replace all references to the old disk to the new one. Is this possible by simply swapping the assigned drive letters? Any help would be greatly appreciated, thanks!

  Read the article

• Python for a hobbyist programmer ( a few questions)

  - by Matt

  I'm a hobbyist programmer (only in TI-Basic before now), and after much, much, much debating with myself, I've decided to learn Python. I don't have a ton of free time to teach myself a hundred languages and all programming I do will be for personal use or for distributing to people who need them, so I decided that I needed one good, strong language to be good at. My questions: Is python powerful enough to handle most things that a typical programmer might do in his off-time? I have in mind things like complex stat generators based on user input for tabletop games, making small games, automate install processes, and build interactive websites, but probably a hundred things along those lines Does python handle networking tasks fairly well? Can python source be obscufated (mispelled I think), or is it going to be open-source by nature? The reason I ask this is because if I make something cool and distribute it, I don't want some idiot script kiddie to edit his own name in and say he wrote it And how popular is python, compared to other languages. Ideally, my language would be good and useful with help found online without extreme difficulty, but not so common that every idiot with computer knows python. I like the idea of knowing a slightly obscure language. Thanks a ton for any help you can provide.

  Read the article

• Hiring a programmer: looking for the "right attitude"

  - by Totophil

  It's actually two questions in one: What is the right attitude for a programmer? How do you (or would you) look for one when interviewing or during hiring process? Please note this question is not about personality or traits of a candidate, it is about their attitude towards what they do for living. This is also not about reverse of programmers pet peeves. The question has been made community wiki, since I am interested in a good answer rather than reputation. I disagree that the question is purely subjective and just a matter of opinion: clearly some attitudes make a better programmer than others. Consecutively, there might quite possibly exist an attitude that is common to the most of the better programmers. Update: After some deliberation I came up with the following attitude measurement scales: identifies themselves with the job ? fully detached perceives code as a collection of concepts ? sees code as a sequence of steps thinks of creating software as an art ? takes 100% rational approach to design and development Answers that include some sort of a comment on the appropriateness of these scales are greatly appreciated. Definition of "attitude": a complex mental state involving beliefs and feelings and values and dispositions to act in certain ways; "he had the attitude that work was fun" The question came as a result of some reflection on the top voted answer to "How do you ensure code quality?" here on Stack Overflow.

  Read the article

• Old desktop programmer wants to create S+S project

  - by Craig

  I have an idea for a product that I want to be web-based. But because I live in Brasil, the internet is not always available so there needs to be a desktop component that is available for when the internet is down. Also, I have been a SQL programmer, a desktop application programmer using dBase, VB and Pascal, and I have created simple websites using HTML and website creation tools, such as Frontpage. So from my research, I think I have the following options; PHP, Ruby on Rails, Python or .NET for the programming side. MySQL for the DB. And Apache, or possibly IIS, for the webserver. I will probably start with a local ISP provider for the cloud servce. But then maybe move to something more "robust" and universal in the future, ie. Amazon, or Azure, or something along that line. My question then is this. What would you recommend for something like this? I'm sure that I have not listed all of the possibilities, but the ones I have researched and thought of. Thanks everyone, Craig

  Read the article

• Learning C++ as a Perl programmer

  - by meneldor

  Hello all, I'm a Perl5 programmer for 7 years and I'm trying to learn C++ now. Some of the c++ syntax is hard for me to understand and to think in c++ way. For example: In perl you can mix the data in the arrays @array = (1,"string",5.355); You can assign any value to a scalar variable: $var = 1; $var = "string"; $var = \$reference_to_scalar; There are many examples. The friend of mine recommend me the book "Thinking of C++" by Bruce Eckel, but I haven't any C background and it's hard for me to understand some things. So my question is - could you recommend me a book for this situation. I don't want to learn C. I understand OOP (I'm getting more familiar with C++ oop aswell), I understand the point of the pointers(and some arithmetic) and references(widely used in perl). I dont need some of the manuals for dummies (what is int,bool,double,if,while), I just need a direction how to learn C++ from my point of perl programmer, because I,m sure that there are many like me. Thank you in advance.

  Read the article

• Mounting NAS share: Bad Address

  - by Korben

  I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

  Read the article

• Would a programmer knowing C# and VB.Net ever choose VB.Net?

  - by Earlz

  Now before someone tells me VB.Net isn't bad like VB was, I know it isn't. But, I've yet to speak to a programmer who is completely content that some project they work on is written in VB.Net. Basically, my question is would a programmer knowing both C# and VB.Net (and all of their team knowing both), would they ever choose VB.Net? And why? All of the VB.Net projects I've seen were written that way only because the programmer that started it(that usually isn't working there anymore) knew VB6(or earlier) and wrote it in VB.Net because of the similar syntax. Is there any advantage to writing a program in VB.Net compared to C#? (hopefully this is appropriate here, SO rejected it within a few minutes)

  Read the article

• Linux Kernel logs: "svc: [ip], port=22936: bad direction 150995200, dropping request"

  - by user39478

  I am regularly getting messages of the form Mar 30 22:32:19 spitzer kernel: [1046770.627666] svc: 128.59.149.154, port=22936: bad direction 150995200, dropping request in my Linux 2.6 server logs. From which subsystem do they come from? What do they mean?

  Read the article

• Bad motherboard / controller / HDs?

  - by quidpro

  On a leased server, I am running into some timing issues with an application that requires precise timing. Server is a Dual Xeon E5410 running on a Supermicro X7DVL-3 motherboard under CentOs 5.5 x64. The application I am running is timer sensitive and keeps sensing drift whether under load or at idle, but especially under load. I did some investigating with atop and dd and found some mind-blowing numbers. Mind you, I am no Linux guru but something sure seems out of whack. I ran: dd bs=4096 if=/dev/zero of=/bigtestfile to generate disk activity. Regardless whether I wrote it to sda or sdb my DSK value in atop would go over 100%, at one time peaking at 1700%. Again it does not matter if I am writing to sda or sdb. DSK | sdb | busy 675% | read 0 | write 110 | avio 78 ms | Here are the smartctl outputs: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 165 165 021 Pre-fail Always - 2750 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000a 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 25831 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 116 093 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 # smartctl -A /dev/sdb smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 180 180 021 Pre-fail Always - 3958 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 22 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 24087 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 122 096 000 Old_age Always - 25 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 Any idea what's wrong here? Bad motherboard? It would seem rare that both drives are going bad (smartctl says they PASS_, so it leaves the mobo as the culprit in my eyes.

  Read the article

• Bad ways to secure wireless network c

  - by Moshe

  I was wondering if anybody had any thoughts on this, as I recently saw a Verizon DSL network set up where the WEP key was the last 8 characters of the router's MAC address. (It's bad enough that hey were using WEP in the first place...)

  Read the article

• Programmer Desk

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: $1000-$2000. Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly http://www.beyondtheofficedoor.com/adjustable-height-table.php The Herman Miller Sense desk looks nice: http://www.csnofficefurniture.com/asp/superbrowse.asp?clid=32&caid=&sku=HML1212&refid=PG7-HML1212 . Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• What is a good programmer's desk? [closed]

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly. The Herman Miller Sense desk looks nice. Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• How small is too small (of laptop for a programmer)

  - by defn

  Im thinking of replacing my HP Pavilion dv5-1004nr with Acer Aspire AS5738-6444, I'm a CS student... so im torn between screen size (liking the 15in and decent gpu.. but it weight nearly 8 pounds and battery can barely last 2 hours in power saver mode) and wanting something portable to carry to classes/take notes ect (3 pounds and up to 8 hour battery life of the acer) what would you guys suggest? acer any good? i love my hp keyboard.. (or have links to other good laptops, im aiming for 600$ range?)

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >