Search Results

Search found 635 results on 26 pages for 'bypass'.

Page 22/26 | < Previous Page | 18 19 20 21 22 23 24 25 26  | Next Page >

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• Is Cloud Security Holding Back Social SaaS?

  - by Mike Stiles

  The true promise of social data co-mingling with enterprise data to influence and inform social marketing (all marketing really) lives in cloud computing. The cloud brings processing power, services, speed and cost savings the likes of which few organizations could ever put into action on their own. So why wouldn’t anyone jump into SaaS (Software as a Service) with both feet? Cloud security. Being concerned about security is proper and healthy. That just means you’re a responsible operator. Whether it’s protecting your customers’ data or trying to stay off the radar of regulatory agencies, you have plenty of reasons to make sure you’re as protected from hacking, theft and loss as you can possibly be. But you also have plenty of reasons to not let security concerns freeze you in your tracks, preventing you from innovating, moving the socially-enabled enterprise forward, and keeping up with competitors who may not be as skittish regarding SaaS technology adoption. Over half of organizations are transferring sensitive or confidential data to the cloud, an increase of 10% over last year. With the roles and responsibilities of CMO’s, CIO’s and other C’s changing, the first thing you should probably determine is who should take point on analyzing cloud software options, providers, and policies. An oft-quoted Ponemon Institute study found 36% of businesses don’t have a cloud security policy at all. So that’s as good a place to start as any. What applications and data are you comfortable housing in the cloud? Do you have a classification system for data that clearly spells out where data types can go and how they can be used? Who, both internally and at the cloud provider, will function as admins? What are the different levels of admin clearance? Will your security policies and procedures sync up with those of your cloud provider? The key is verifiable trust. Trust in cloud security is actually going up. 1/3 of organizations polled say it’s the cloud provider who should be responsible for data protection. And when you look specifically at SaaS providers, that expectation goes up to 60%. 57% “strongly agree” or “agree” there’s more confidence in cloud providers’ ability to protect data. In fact, some businesses bypass the “verifiable” part of verifiable trust. Just over half have no idea what their cloud provider does to protect data. And yet, according to the “Private Cloud Vision vs. Reality” InformationWeek Report, 82% of organizations say security/data privacy are one of the main reasons they’re still holding the public cloud at arm’s length. That’s going to be a tough position to maintain, because just as social is rapidly changing the face of marketing, big data is rapidly changing the face of enterprise IT. Netflix, who’s particularly big on the benefits of the cloud, says, "We're systematically disassembling the corporate IT components." An enterprise can never realize the full power of big data, nor get the full potential value out of it, if it’s unwilling to enable the integrations and dataset connections necessary in the cloud. Because integration is called for to reduce fragmentation, a standardized platform makes a lot of sense. With multiple components crafted to work together, you’re maximizing scalability, optimization, cost effectiveness, and yes security and identity management benefits. You can see how the incentive is there for cloud companies to develop and add ever-improving security features, making cloud computing an eventual far safer bet than traditional IT. @mikestilesPhoto: stock.xchng

  Read the article

• Friday Tips #3

  - by Chris Kawalek

  Even though yesterday was Thanksgiving here in the US, we still have a Friday tip for those of you around your computers today. In fact, we have two! The first one came in last week via our #AskOracleVirtualization Twitter hashtag. The tweet has disappeared into the ether now, but we remember the gist, so here it is: Question: Will there be an Oracle Virtual Desktop Client for Android? Answer by our desktop virtualization product development team: We are looking at Android as a supported platform for future releases. Question: How can I make a Sun Ray Client automatically connect to a virtual machine? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Someone recently asked how they can assign VM’s to specific Sun Ray Desktop Units (“DTU’s”) without any user interfaction being required, without the “Desktop Selector” being displayed, or any User Directory.  That is, they wanted each Sun Ray to power on and immediately connect to a pre-assigned Solaris VM.   This can be achieved by using “tokens” for user assignment – that is, the tokens found on Smart Cards, DTU’s, or OVDC clients can be used in place of user credentials.  Note, however, that mixing “token-only” assignments and “User Directories” in the same VDI Center won’t work.   Much of this procedure is covered in the documentation, particularly here. But it can useful to have everything in one place, “cookbook-style”:  1. Create the “token-only” directory type: From the VDI administration interface, select:  “Settings”, “Company”, “New”, select the “None” radio button, and click “Next.” Enter a name for the new “Company”, and click “Next”, then “Finish.” 2. Create Desktop Providers, Pools, and VM’s as appropriate. 3. Access the Sun Ray administration interface at http://servername:1660 and login using “root” credentials, and access the token-id’s you wish to use for assignment.  If you’re using DTU tokens rather than Smart Card tokens, these can be found under the “Tokens” tab, and “Search-ing” using the “Currently Used Tokens” tab.  DTU’s can be identified by the prefix “psuedo.”   For example: 4. Copy/paste this token into the VDI administrative interface, by selecting “Users”, “New”, and pasting in the token ID, and click “OK” - for example: 5. Assign the token (DTU) to a desktop, that is, in the VDI Admin Gui, select “Pool”, “Desktop”, select the VM, and click "Assign" and select the token you want, for example: In addition to assigning tokens to desktops, you'll need to bypass the login screen.  To do this, you need to do two things:  1.  Disable VDI client authentication with:  /opt/SUNWvda/sbin/vda settings-setprops -p clientauthentication=Disabled 2. Disable the VDI login screen – to do this,  add a kiosk argument of "-n" to the Sun Ray kiosk arguments screen.   You set this on the Sun Ray administration page - "Advanced", "Kiosk Mode", "Edit", and add the “-n” option to the arguments screen, for example: 3.  Restart both the Sun Ray and VDI services: # /opt/SUNWut/sbin/utstart –c # /opt/SUNWvda/sbin/vda-service restart Remember, if you have a question for us, please post on Twitter with our hashtag (again, it's #AskOracleVirtualization), and we'll try to answer it if we can. See you next time!

  Read the article

• Crime Scene Investigation: SQL Server

  - by Rodney Landrum

  “The packages are running slower in Prod than they are in Dev” My week began with this simple declaration from one of our lead BI developers, quickly followed by an emailed spreadsheet demonstrating that, over 5 executions, an extensive ETL process was running average 630 seconds faster on Dev than on Prod. The situation needed some scientific investigation to determine why the same code, the same data, the same schema would yield consistently slower results on a more powerful server. Prod had yet to be officially christened with a “Go Live” date so I had the time, and having recently been binge watching CSI: New York, I also had the inclination. An inspection of the two systems, Prod and Dev, revealed the first surprise: although Prod was indeed a “bigger” system, with double the amount of RAM of Dev, the latter actually had twice as many processor cores. On neither system did I see much sign of resources being heavily taxed, while the ETL process was running. Without any real supporting evidence, I jumped to a conclusion that my years of performance tuning should have helped me avoid, and that was that the hardware differences explained the better performance on Dev. We spent time setting up a Test system, similarly scoped to Prod except with 4 times the cores, and ported everything across. The results of our careful benchmarks left us truly bemused; the ETL process on the new server was slower than on both other systems. We burned more time tweaking server configurations, monitoring IO and network latency, several times believing we’d uncovered the smoking gun, until the results of subsequent test runs pitched us back into confusion. Finally, I decided, enough was enough. Hadn’t I learned very early in my DBA career that almost all bottlenecks were caused by code and database design, not hardware? It was time to get back to basics. With over 100 SSIS packages and hundreds of queries, each handling specific tasks such as file loads, bulk inserts, transforms, logging, and so on, the task seemed formidable. And yet, after barely an hour spent with Profiler, Extended Events, and wait statistics DMVs, I had a lead in the shape of a query that joined three tables, containing millions of rows, returned 3279 results, but performed 239K logical reads. As soon as I looked at the execution plans for the query in Dev and Test I saw the culprit, an implicit conversion warning on a join predicate field that was numeric in one table and a varchar(50) in another! I turned this information over to the BI developers who quickly resolved the data type mismatches and found and fixed “several” others as well. After the schema changes the same query with the same databases ran in under 1 second on all systems and reduced the logical reads down to fewer than 300. The analysis also revealed that on Dev, the ETL task was pulling data across a LAN, whereas Prod and Test were connected across slower WAN, in large part explaining why the same process ran slower on the latter two systems. Loading the data locally on Prod delivered a further 20% gain in performance. As we progress through our DBA careers we learn valuable lessons. Sometimes, with a project deadline looming and pressure mounting, we choose to forget them. I was close to giving into the temptation to throw more hardware at the problem. I’m pleased at least that I resisted, though I still kick myself for not looking at the code on day one. It can seem a daunting prospect to return to the fundamentals of the code so close to roll out, but with the right tools, and surprisingly little time, you can collect the evidence that reveals the true problem. It is a lesson I trust I will remember for my next 20 years as a DBA, if I’m ever again tempted to bypass the evidence.

  Read the article

• Best approach to depth streaming via existing codec

  - by Kevin

  I'm working on a development system (and game) intended for games set mostly in static third-person views. We produce our scenery by CG and photographic techniques. Our background art is rendered off-line by a production-grade renderer. To allow the runtime imagery to properly interact with the background art, I wrote a program to convert from depth output by Mental Ray into a texture, and a pixel shader to draw a quad such that the Z data comes from the texture. This technique is working out very well, but now we've decided that some of the camera angle changes between scenes should be animated. The animation itself is straightforward to produce from our CG models. We intend to encode it to some HD video codec such as H.264. The problem is that in order to maintain our runtime imagery on the screen, the depth buffer will need to be loaded for each video frame. Due to the bandwidth, the video's depth data will need to be compressed efficiently. I've looked into methods for performing temporal compression of depth info and found an interesting research paper here: http://web4.cs.ucl.ac.uk/staff/j.kautz/publications/depth-streaming.pdf The method establishes a mapping between 16-bit depth values and YCbCr values. The mapping is tuned to the properties of existing video codecs in order to maximize precision of the decoded depths after the YCbCr has undergone video compression. It allows an existing, unmodified video codec to be used on the backend. I'm looking at how to pull this off with the least possible work. (This design change was unplanned.) Our game engine itself is native C++, presently for Win32 and DirectX, although we've worked hard to keep platform dependence segregated because we intend other ports. We don't have motion video facilities in the engine yet but will ultimately need that anyway for cinematics. I was planning on using some off-the-shelf motion video solution we can plug into our engine, and haven't chosen one yet. This new added requirement makes selecting one harder since, among other things, we'll now need to bypass colourspace conversion on one of the streams, and also will need to be playing two streams simultaneously in lockstep, on top of in some cases audio on one of them (for the cinematics). I'm also wondering if it's possible (or even useful) to do the conversion from YCbCr to depth in a pixel shader, or if it's better to just do it in CPU and separately load the resulting depth values into a locked tex. The conversion unfortunately does involve branching logic per-pixel. (There are more naive mappings that don't need branching, but they produce inferior results.) It could be reduced to a table lookup but the table would be 32MB. Programming is second-nature to me but I'm not that experienced with pix shaders and have zero knowledge of off-the-shelf video solutions. I'd therefore be interested in advice from others who may have dealt more with depth streaming, pixel shaders, and/or off-the-shelf codecs, regarding how feasible the proposed application is and what off-the-shelf video systems out there would best get along with this usage case.

  Read the article

• Encouter error "Linux ip -6 addr add failed" while setting up OpenVPN client

  - by Mickel

  I am trying to set up my router to use OpenVPN and have gotten quite far (I think), but something seems to be missing and I am not sure what. Here is my configuration for the client: client dev tun proto udp remote ovpn.azirevpn.net 1194 remote-random resolv-retry infinite auth-user-pass /tmp/password.txt nobind persist-key persist-tun ca /tmp/AzireVPN.ca.crt remote-cert-tls server reneg-sec 0 verb 3 OpenVPN client log: Nov 8 15:45:13 rc_service: httpd 15776:notify_rc start_vpnclient1 Nov 8 15:45:14 openvpn[27196]: OpenVPN 2.3.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 1 2013 Nov 8 15:45:14 openvpn[27196]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Nov 8 15:45:14 openvpn[27196]: Socket Buffers: R=[116736->131072] S=[116736->131072] Nov 8 15:45:14 openvpn[27202]: UDPv4 link local: [undef] Nov 8 15:45:14 openvpn[27202]: UDPv4 link remote: [AF_INET]178.132.75.14:1194 Nov 8 15:45:14 openvpn[27202]: TLS: Initial packet from [AF_INET]178.132.75.14:1194, sid=44d80db5 8b36adf9 Nov 8 15:45:14 openvpn[27202]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=1, C=RU, ST=Moscow, L=Moscow, O=Azire Networks, OU=VPN, CN=Azire Networks, name=Azire Networks, [email protected] Nov 8 15:45:14 openvpn[27202]: Validating certificate key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has key usage 00a0, expects 00a0 Nov 8 15:45:14 openvpn[27202]: VERIFY KU OK Nov 8 15:45:14 openvpn[27202]: Validating certificate extended key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Nov 8 15:45:14 openvpn[27202]: VERIFY EKU OK Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=0, C=RU, ST=Moscow, L=Moscow, O=AzireVPN, OU=VPN, CN=ovpn, name=ovpn, [email protected] Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Nov 8 15:45:15 openvpn[27202]: [ovpn] Peer Connection Initiated with [AF_INET]178.132.75.14:1194 Nov 8 15:45:17 openvpn[27202]: SENT CONTROL [ovpn]: 'PUSH_REQUEST' (status=1) Nov 8 15:45:17 openvpn[27202]: PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2a03:8600:1001:4010::101f/64 2a03:8600:1001:4010::1,route-ipv6 2000::/3 2A03:8600:1001:4010::1,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 194.1.247.30,tun-ipv6,route-gateway 178.132.77.1,topology subnet,ping 3,ping-restart 15,ifconfig 178.132.77.33 255.255.255.192' Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: timers and/or timeouts modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ifconfig/up options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route-related options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Nov 8 15:45:17 openvpn[27202]: TUN/TAP device tun0 opened Nov 8 15:45:17 openvpn[27202]: TUN/TAP TX queue length set to 100 Nov 8 15:45:17 openvpn[27202]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1 Nov 8 15:45:17 openvpn[27202]: /usr/sbin/ip link set dev tun0 up mtu 1500 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip addr add dev tun0 178.132.77.33/26 broadcast 178.132.77.63 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip -6 addr add 2a03:8600:1001:4010::101f/64 dev tun0 Nov 8 15:45:18 openvpn[27202]: Linux ip -6 addr add failed: external program exited with error status: 254 Nov 8 15:45:18 openvpn[27202]: Exiting due to fatal error Any ideas are most welcome!

  Read the article

• How to make Firefox use TCP for DNS

  - by miniBill

  I want to use TCP for DNS, to bypass my ISP's slow and broken DNS servers. I'm not using (and don't want to use) a proxy. Note: I want to use DNS over TCP because if I use it over udp, no matter what server I set, I get answers from my ISP's DNS. Notice that I will fiercely downvote whoever suggests: programs to do TCP over DNS, the setting in about:config to make DNS go over the proxy too: I'm not using a proxy, use another DNS: I've already set up Google as my DNS, but I get intercepted. Example of what I mean by saying intercept: $ dig @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24385 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 28800 IN A 83.224.65.41 ;; Query time: 50 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:06 2012 ;; MSG SIZE rcvd: 49 $ dig +tcp @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> +tcp @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15131 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 436 IN A 194.71.107.15 ;; Query time: 61 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:10 2012 ;; MSG SIZE rcvd: 49 If it matters, I'm using Firefox 14 on Gentoo Linux.

  Read the article

• Can't get Passwordless (SSH provided) SFTP working

  - by Shoaibi

  I have chrooted sftp setup as below. # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin without-password StrictModes yes AllowGroups admins clients RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* #Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Subsystem sftp internal-sftp Match group clients ChrootDirectory /var/chroot-home X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/david:/bin/sh Now in this case david can sftp using say filezilla client and he is chrooted to /var/chroot-home/david/. But what if i was to setup a passwordless auth? I have tried pasting his key in /var/chroot-home/david/.ssh/authorized_keys but no use, tried ssh'ing as david to the box and it just stops at "debug1: Sending env LC_CTYPE = C" after i supply it password and there is nothing shown in auth.log, may be because it can't find the homedir. If i do "su - david" as root i see "No directory, logging in with HOME=/" which makes sense. Symlink doesn't help either. I have also tried with: Match group clients ChrootDirectory /var/chroot-home/%u X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp a dummy user root:~# tail -n1 /etc/passwd david:x:1000:1001::/var/chroot-home/david:/bin/sh This way if i don't change /var/chroot-home/david to root:root sshd complains about bad ownership or permission modes, and if i do, david can no longer upload/delete anything directly in his home while using sftp from filezilla.

  Read the article

• can not connect through SCP, but SSH connections works

  - by Joe Cabezas

  i am trying to connect to my server to transfer file using scp: $ scp -v -r -P <port> <user>@<host>:~/dir/ dir/ this is the output: OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/joe/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to <host> [<host>] port <port>. debug1: Connection established. debug1: identity file /Users/joe/.ssh/identity type -1 debug1: identity file /Users/joe/.ssh/id_rsa type -1 debug1: identity file /Users/joe/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host but connecting via SSH works fine: $ ssh <user>@<host> -p <port> <user>@<host>'s password: <user>@<host>:~$ OK what can be wrong with this? my /etc/ssh/sshd_config file on the host is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port <port> # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication no #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes

  Read the article

• apache mod_cache in v2.2 - enable cache based on url

  - by Janning

  We are using apache2.2 as a front-end server with application servers as reverse proxies behind apache. We are using mod_cache for some images and enabled it like this: <IfModule mod_disk_cache.c> CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache CacheIgnoreCacheControl On CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The image urls vary completely and have no common start pattern, but they all end in ".png". Thats why we used the root in CacheEnable / If not served from the cache, the request is forwarded to an application server via reverse proxy. So far so good, cache is working fine. But I really only need to cache all image request ending in ".png". My above configuration still works as my application server send an appropriate Cache-Control: no-cache header on the way back to apache. So most pages send a no-cache header back and they get not cached at all. My ".png" responses doesn't send a Cache-Control header so apache is only going to cache all urls with ".png". Fine. But when a new request enters apache, apache does not know that only .png requests should be considered, so every request is checking a file on disk (recorded with strace -e trace=file -p pid): [pid 19063] open("/var/cache/apache2/mod_disk_cache/zK/q8/Kd/g6OIv@woJRC_ba_A.header", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) I don't want to have apache going to disk every request, as the majority of requests are not cached at all. And we have up to 10.000 request/s at peak time. Sometimes our read IO wait spikes. It is not getting really slow, but we try to tweak it for better performance. In apache 2.4 you can say: <LocationMatch .png$> CacheEnable disk </LocationMatch> This is not possible in 2.2 and as I see no backports for debian I am not going to upgrade. So I tried to tweak apache2.2 to follow my rules: <IfModule mod_disk_cache.c> SetEnvIf Request_URI "\.png$" image RequestHeader unset Cache-Control RequestHeader append Cache-Control no-cache env=!image CacheEnable disk / CacheRoot /var/cache/apache2/mod_disk_cache #CacheIgnoreCacheControl on CacheMaxFileSize 2500000 CacheIgnoreURLSessionIdentifiers jsessionid CacheIgnoreHeaders Set-Cookie </IfModule> The idea is to let apache decide to serve request from cache based on Cache-control header (CacheIgnoreCacheControl default to off). And before simply set a RequestHeader based on the request. If it is not an image request, set a Cache-control header, so it should bypass the cache at all. This does not work, I guess because of late processing of RequestHeader directive, see https://httpd.apache.org/docs/2.2/mod/mod_headers.html#early I can't add early processing as "early" keyword can't be used together with a conditional "env=!image" I can't change the url requesting the images and I know there are of course other solutions. But I am only interested in configuring apache2.2 to reach my goal. Does anybody has an idea how to achieve my goal?

  Read the article

• Windows 2008 R2 CA and auto-enrollment: how to get rid of >100,000 issued certificates?

  - by HopelessN00b

  The basic problem I'm having is that I have 100,000 useless machine certificates cluttering up my CA, and I'd like to delete them, without deleting all certs, or time jumping the server ahead, and invalidating some of the useful certs on there. This came about as a result of accepting a couple defaults with our Enterprise Root CA (2008 R2) and using a GPO to auto-enroll client machines for certificates to allow 802.1x authentication to our corporate wireless network. Turns out that the default Computer (Machine) Certificate Template will happily allow machines to re-enroll instead of directing them to use the certificate they already have. This is creating a number of problems for the guy (me) who was hoping to use the Certificate Authority as more than a log of every time a workstation's been rebooted. (The scroll bar on the side is lying, if you drag it to the bottom, the screen pauses and loads the next few dozen certs.) Does anyone know how to DELETE 100,000 or so time-valid, existing certificates from a Windows Server 2008R2 CA? When I go to delete a certificate now, now, I get an error that it cannot be delete because it's still valid. So, ideally, some way to temporarily bypass that error, as Mark Henderson's provided a way to delete the certificates with a script once that hurdle is cleared. (Revoking them is not an option, as that just moves them to Revoked Certificates, which we need to be able to view, and they can't be deleted from the revoked "folder" either.) Update: I tried the site @MarkHenderson linked, which is promising, and offers much better certificate manageability, buts still doesn't quite get there. The rub in my case seems to be that the certificates are still "time-valid," (not yet expired) so the CA doesn't want to let them be deleted from existence, and this applies to revoked certs as well, so revoking them all and then deleting them won't work either. I've also found this technet blog with my Google-Fu, but unfortunately, they seemed to only have to delete a very large number of certificate requests, not actual certificates. Finally, for now, time jumping the CA forward so the certificates I want to get rid of expire, and therefore can be deleted with the tools at the site Mark linked is not a great option, as would expire a number of valid certificates we use that have to be manually issued. So it's a better option than rebuilding the CA, but not a great one.

  Read the article

• How to Block a HTTP Website along with Its All Subdomain using IPTABLE

  - by netnovice

  I run a small HTTP web proxy site . We can not modify anything there in Proxy program. Few users mainly use Yahoo Web mail for Spamming and We need to block yahoo web mail access only ( complete yahoo website is also Ok) through our proxy . specially .mail.yahoo.com.. Like - we need to block URL like - http://uk-mg61.mail.yahoo.com http://in-mg61.mail.yahoo.com etc. etc. Note : We generaly open http://mail.yahoo.com in browser - but after loggin in it forwards it to Urls like above but all those are subdomain of mail.yahoo.com My target is if we can get all IP list for all available subdomain of mail.yahoo.com I can block it totally . We can only use IPTABLE ...I know using proxy itself we can check HTTP header and check Host field for .mail.yahoo.com. and block it. Solution : Follwoign what I did using IPtable . I collected IP CIDR block for yahoo mainly for yahoo web mail ( mail.yahoo.com ) as much as possible ( using linux host and whois command ) [ like 66.163.160.0/19 nd 98.136.0.0/14 etc ] and applied follwing command Like iptables -A OUTPUT -p tcp -d 66.163.160.0/19 -m state --state NEW -j DROP etc. Things are working fine. user can not access yahoo mail BUT the problem is I need to be updated with the avaialble CIDR YAHOO IP list ... I am ready to do it every week. I collected many from Net... You know theer are countles subdomain of mail.yahoo.com and seems every week Yahoo adding new IP... But what I observed some time user can bypass our rule and the reason obvously all the avaialble Ips are not entered in IPtable yet. What we need to do is enter all Ips of mail.yahoo.co But where do I find all subdomain for mail.yahoo.com I know we can get it from DNS but I must not be allowed to make DNS axfr query. Also doing reverse DNS will have performance issue. I want to know all subdomain of .mail.yahoo.c Can I get it from yahoo site. I have the list of all YAHOO smtp IP....but I need webmail Ip... ( http://public.yahoo.com/carloc/ymail.html ) Can you please share your Idea. Thank you

  Read the article

• Using OpenVPN, yet netflix.com blocks access

  - by user837848

  I have set up an OpenVPN server on a VPS in the USA and configured it to route all clients traffic through it. Everything seems to work fine regarding the VPN connection in gerneral. All ip lookup sites show me the us server's ip address and even hulu.com works(it won't work if you are not in the usa). But for some reason netflix.com says "Sorry, Netflix is not available in your country yet.". So I thought that netflix probably uses some more sophisticated ways to determine your location beyond just your ip address. But I could not find a way to get it to work until I dropped the idea of using a VPN and instead connected to the server via a simple socks tunnel with ssh by running: ssh -D 9999 user@serverip All I had to do was changing the key network.proxy.socks_remote_dns in Firefox from false to true to prevent DNS leaks and setting up the socks proxy. Then I could finally watch netflix.com. As a result I concluded that there is nothing in the browser(or something like system timezone) that tells netflix the location, so it has to have something to do with the OpenVPN config. After that I used tcpdump to log all the traffic on the server's network interface venet0 (OpenVZ VPS), visited netflix.com on the client while first connected to the VPN and then connected via socks tunnel and afterwards compared both outputs. The only thing that caught my eye was that while using the socks tunnel the server mainly used ipv6 to connect to netflix whereas it only used ipv4 when the client was connected to the OpenVPN server. But I don't get how that could make such a difference. So what am I missing? Is there a way to configure OpenVPN to also use ipv6 to connect to a website although there is only an ipv4 connection between the VPS and the client? Here is the server.conf of the OpenVPN server (OpenVZ VPS) local serverip port 443 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/vps1.crt key ./easy-rsa2/keys/vps1.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" client-to-client keepalive 10 120 tls-auth ta.key 0 # This file is secret cipher AES-256-CBC comp-lzo max-clients 4 user nobody group nogroup persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 3 iptables forwarding iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o venet0 -j SNAT --to-source serverip (enabled ipv4 forwarding) I have tried everything always on a Win7 and a Debian client with only ipv4 connections and always made sure that they use the correct DNS server (tested with ipleak.net and tcpdump / wireshark). client.conf: client dev tun proto tcp remote serverip 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 cipher AES-256-CBC comb-lzo verb 3

  Read the article

• Block IP Address including ICMP using UFW

  - by dr jimbob

  I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

  Read the article

• TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

  - by Tim Dickerson

  I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

  Read the article

• Building a Mac/PC Network in a Dorm with Network Restrictions

  - by user70340

  I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• SSH: Port Forwarding, Firewalls, & Plesk

  - by Kian Mayne

  I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

  - by Abner

  Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

  Read the article

• Problems with MGCP proxy creation

  - by Popof

  Hi, I'm trying to bypass my ISP router with my FreeBSD server (I've an optical connection so I've a RJ45 used to connect the box to WAN) Internet and TV are working fine (Using igmpproxy to forward TV stream) but I've a problem with phone. ISP's box is connected to the server which gives it a LAN address. The problem is that when the box builds MGCP packets (and especially SDP ones) it uses its LAN address. So I've think of writing an UDP proxy to handle MGCP and SDP packets in order to replace LAN address with server WAN address and then forward packet to WAN. Before starting coding I've captured stream packets using my server as a bridge between WAN connection and the ISP's box. And, in order to see if my solution is viable, I've tried to send those packets to the box using nemesis. I tried to send a packet (found in capture) containing an endpoint audit: AUEP 1447 aaln/[email protected] MGCP 1.0 F: A In the wireshark capture the box replied: 200 1447 OK A: a:PCMU;PCMA;G726-16;G726-24;G726-32;G726-40;G.723.1-5.3;G.723.1-6.3;G729;TELEPHONE-EVENT, fmtp:"TELEPHONE-EVENT 0-15,144,149,159", p:10-30, b:4-40, e:on, t:00, s:on, v:L;M;G;D, m:sendonly;recvonly;sendrecv;inactive;confrnce;replcate;netwtest;netwloop, dq-gi But when I use nemesis, I got an ICMP error: Port unreachable (Type 3, Code 3). To build this packet, WAN source address of the capture is replaced with my server LAN address, using the mgcp-callagent port (2727) and the packet is sent to the LAN address of the box at mgcp-gateway port (2427). The command I use is nemesis udp -S 192.168.2.1 -D 192.168.2.2 -x 2727 -y 2427 -P packet_to_send. I also tried an UDP scan to the box on callagent and gateway port: PORT STATE SERVICE 2727/udp open|filtered unknown 2427/udp closed unknown I found those results a little bit strange because it should be the 2427 port opened, as it was in capture. Internet Protocol, Src: <ISP MGCP Server>, Dst: <My WAN Address> User Datagram Protocol, Src Port: mgcp-callagent (2727), Dst Port: mgcp-gateway (2427) Does someone has any idea about how having my box responding to my requests ? Thanks in advance and sorry for my english.

  Read the article

• new PC not work with existing router, but works fine when directly connecting to cable modem

  - by user34786

  I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

  Read the article

• How to configure apache's mod_proxy_html to work as an ajax proxy?

  - by dcerecedo

  I'm trying to build a web site that let's you view and manipulate data from any page in any other website. To do that, I have to bypass 'Allow Origin' problems: i'm loading the other domain's content in an iframe and i have to manipulate its content with javascript downloaded from my domain. My first attempt was to write a simple proxy myself, requesting the other domains page through a server proxy coded in Java that not only serves the content but rebuilds links (src's and href's) in the content so that the content referenced by these links alse get downloaded through my handmade proxy. The result is not bad but has problems with url's in css and scripts. It's then that i realized that mod_proxy_html is supposed to do exactly all this job. The problem is that i cannot figure out how to make it work as expected. Let's suppose my server runs in my-domain.com and to proxy and transform content from another domain i'd make a request like this: my-domain.com/proxy?url=http://another-domain.com/some/content I'd want mod_proxy_html to serve the content and rewrite following URLs in http://another-domain.com/some/content in the following ways: Absolute URLs not from another-domain.com: no rewritting Relative from root urls:/other/content - /proxy?url=http://another-domain.com/other/content Relative urls: other/content - /proxy?url=http://another-domain.com/some/content/other/content Relative to parent urls: ../other/content - /proxy?url=http://another-domain.com/some/other/content The url should be specified at runtime, not configuration time. Can this be achieved with mod_proxy_html? Could anyone provide a simple working configuration to start with? EDIT 1-First approach The following site config will work fine with sites that use absolute url's everywhere like http://www.huffingtonpost.es/. Youc could try on this config on localhost: http://localhost/asset/http://www.huffingtonpost.es/ <VirtualHost *:80> ServerName localhost LogLevel debug ProxyRequests off RewriteEngine On RewriteRule ^/asset/(.*) $1 [P] ProxyHTMLURLMap $1 /asset/ <Location /asset/> ProxyPassReverse / ProxyHTMLURLMap / /asset/ </Location> </VirtualHost> But as explained in the documentation, if I hit a site using relative url's, I'd like to have these rewritten on the html via mod_proxy_html. So I shoud change the Location block as follows: <Location /asset/> ProxyPassReverse / #Depending on your system use one line or the other #Ubuntu: #SetOutputFilter proxy-html #any other system: ProxyHTMLEnable On ProxyHTMLURLMap / /asset/ </Location> ...which doesn't seem to work. Comments, hints and ideas welcome!

  Read the article

• Add Zune Desktop Player to Windows 7 Media Center

  - by DigitalGeekery

  Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• UCM 11g is 4 days old!

  - by kyle.hatlestad

  Ok...so I missed posting a blog entry when UCM 11g and the entire ECM suite released on Tuesday. Hopefully you've already seen the announcements on any number of the Oracle ECM blogs out there such as ECM Alerts, Fusion ECM, bex huff, or C4. So I won't bore you with the same talking points like 179 million check-ins per day or 124 web site page hits per second. Instead, I thought I'd show some screenshots of the new features in UCM and URM 11g. WebLogic Server and Enterprise Manager So probably the biggest change in 11g is UCM and URM now run on top of the WebLogic Server application server. This is a huge step as ECM is now on a standard platform with the rest of Oracle Fusion Middleware which makes installation, configuration, and integration consistent among all the products. From a feature perspective, it's also beneficial because it's now integrated with Oracle Enterprise Manager. Enterprise Manager provides a lot of provisioning control over servers as well as performance monitoring and access to logs and debugging information. Desktop Integration Suite Desktop Integration Suite got a complete overhaul for 11g. It exposes a lot more features within Windows Explorer such as saved searches, workflow queue, and checked-out items. It also now support metadata pop-up screens to let users fill in additional metadata when they drag-n-drop files in! And the integration within Office applications has changed significantly by introducing a dedicated UCM menu to do open, save, compare, etc. Site Studio for External Applications In UCM Site Studio 10gR4, a major architectural shift was introduced which brought several new objects such as elements, region definitions, region templates, and placeholder definitions. This truly separated the content from the display and from the definition. It also allowed separation of the content from needing to be rendered on a complete Site Studio page. Well, the new Site Studio for External Applications takes advantage of that architecture and introduces pre-built tags and plug-ins to JDeveloper to allow to go from simply adding a content area to your web application page to building an entire web site, just like you would have done in Site Studio Designer. In addition to these changes, enhancements to the core Site Studio have been added as well. One of the big ones is called Designer Mode which allows power-users to bypass the standard rules defined by the placeholder definition or template and perform any number of additional actions. This reduces the need to go back to Site Studio Designer or JDeveloper to make more advanced changes to the site. Dashboards As part of the updated records management functionality in both UCM and URM, users can now set a dashboard view on their home page to surface common functions in a single view. It has pre-built "portlets" users can choose from to display and organize they way they want. Behind the scenes, these dashboards are stored as Content Folios. So the dashboards themselves are content items that can be revisioned and shared between users. And new dashboard portlets can be easily added (like the User Profile one in the screenshots) by getting a copy of an existing one, modifying the display, and then checking it in as a new one to select from. URM Interface Enhancements URM includes several new UI and usability enhancements in 11g. There is a new view for physical records, a place to configure "favorite" items to quickly get to, and new placement of the records management menu. BI Publisher Reports Records management in UCM and URM now offer reports generated through embedded BI Publisher. Templates are controlled by rich text files checked directly into the repository, so they can be easily modified. Other Features A new Inbound Refinery conversion option is available that does native Microsoft Office HTML conversion. If your IBR is on Windows and you have the native applications loaded, the IBR can use them to produce HTML. A new GUI template editor for Dynamic Converter is available. It's written in Java so is available through all the supported browsers and platforms. The original ActiveX based editor is also still available. The Component Manager interface has changed to help provide an easier and more descriptive way to enable core components that are installed along with UCM. All of the supported components are immediately available to turn on and do not have to be installed separately as in previous versions. My Downloads is located in the My Content Server menu and provides for easy download of client installs including Desktop Integration Suite and Site Studio Designer. Well, hopefully that gives you a taste for some of the new things in 11g. We're all pretty excited here at Oracle about all the new changes and enhancements. Over the next few months I hope to highlight some of these features more in-depth, so keep your eye out for those posts.

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26  | Next Page >