Search Results

Search found 11640 results on 466 pages for 'figure'.

Page 22/466 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • HTML5 video capture and streaming?

    - by Shyatic
    I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

    Read the article

  • Finding most Important Node(s) in a Directed Graph

    - by Srikar Appal
    I have a large (˜ 20 million nodes) directed Graph with in-edges & out-edges. I want to figure out which parts of of the graph deserve the most attention. Often most of the graph is boring, or at least it is already well understood. The way I am defining "attention" is by the concept of "connectedness" i.e. How can i find the most connected node(s) in the graph? In what follows, One can assume that nodes by themselves have no score, the edges have no weight & they are either connected or not. This website suggest some pretty complicated procedures like n-dimensional space, Eigen Vectors, graph centrality concepts, pageRank etc. Is this problem that complex? Can I not do a simple Breadth-First Traversal of the entire graph where at each node I figure out a way to find the number of in-edges. The node with most in-edges is the most important node in the graph. Am I missing something here?

    Read the article

  • Resolution stuck in 640x480 in grub, 11.04 and 12.04

    - by user89797
    I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

    Read the article

  • Taming Hopping Windows

    - by Roman Schindlauer
    At first glance, hopping windows seem fairly innocuous and obvious. They organize events into windows with a simple periodic definition: the windows have some duration d (e.g. a window covers 5 second time intervals), an interval or period p (e.g. a new window starts every 2 seconds) and an alignment a (e.g. one of those windows starts at 12:00 PM on March 15, 2012 UTC). var wins = xs     .HoppingWindow(TimeSpan.FromSeconds(5),                    TimeSpan.FromSeconds(2),                    new DateTime(2012, 3, 15, 12, 0, 0, DateTimeKind.Utc)); Logically, there is a window with start time a + np and end time a + np + d for every integer n. That’s a lot of windows. So why doesn’t the following query (always) blow up? var query = wins.Select(win => win.Count()); A few users have asked why StreamInsight doesn’t produce output for empty windows. Primarily it’s because there is an infinite number of empty windows! (Actually, StreamInsight uses DateTimeOffset.MaxValue to approximate “the end of time” and DateTimeOffset.MinValue to approximate “the beginning of time”, so the number of windows is lower in practice.) That was the good news. Now the bad news. Events also have duration. Consider the following simple input: var xs = this.Application                 .DefineEnumerable(() => new[]                     { EdgeEvent.CreateStart(DateTimeOffset.UtcNow, 0) })                 .ToStreamable(AdvanceTimeSettings.IncreasingStartTime); Because the event has no explicit end edge, it lasts until the end of time. So there are lots of non-empty windows if we apply a hopping window to that single event! For this reason, we need to be careful with hopping window queries in StreamInsight. Or we can switch to a custom implementation of hopping windows that doesn’t suffer from this shortcoming. The alternate window implementation produces output only when the input changes. We start by breaking up the timeline into non-overlapping intervals assigned to each window. In figure 1, six hopping windows (“Windows”) are assigned to six intervals (“Assignments”) in the timeline. Next we take input events (“Events”) and alter their lifetimes (“Altered Events”) so that they cover the intervals of the windows they intersect. In figure 1, you can see that the first event e1 intersects windows w1 and w2 so it is adjusted to cover assignments a1 and a2. Finally, we can use snapshot windows (“Snapshots”) to produce output for the hopping windows. Notice however that instead of having six windows generating output, we have only four. The first and second snapshots correspond to the first and second hopping windows. The remaining snapshots however cover two hopping windows each! While in this example we saved only two events, the savings can be more significant when the ratio of event duration to window duration is higher. Figure 1: Timeline The implementation of this strategy is straightforward. We need to set the start times of events to the start time of the interval assigned to the earliest window including the start time. Similarly, we need to modify the end times of events to the end time of the interval assigned to the latest window including the end time. The following snap-to-boundary function that rounds a timestamp value t down to the nearest value t' <= t such that t' is a + np for some integer n will be useful. For convenience, we will represent both DateTime and TimeSpan values using long ticks: static long SnapToBoundary(long t, long a, long p) {     return t - ((t - a) % p) - (t > a ? 0L : p); } How do we find the earliest window including the start time for an event? It’s the window following the last window that does not include the start time assuming that there are no gaps in the windows (i.e. duration < interval), and limitation of this solution. To find the end time of that antecedent window, we need to know the alignment of window ends: long e = a + (d % p); Using the window end alignment, we are finally ready to describe the start time selector: static long AdjustStartTime(long t, long e, long p) {     return SnapToBoundary(t, e, p) + p; } To find the latest window including the end time for an event, we look for the last window start time (non-inclusive): public static long AdjustEndTime(long t, long a, long d, long p) {     return SnapToBoundary(t - 1, a, p) + p + d; } Bringing it together, we can define the translation from events to ‘altered events’ as in Figure 1: public static IQStreamable<T> SnapToWindowIntervals<T>(IQStreamable<T> source, TimeSpan duration, TimeSpan interval, DateTime alignment) {     if (source == null) throw new ArgumentNullException("source");     // reason about DateTime and TimeSpan in ticks     long d = Math.Min(DateTime.MaxValue.Ticks, duration.Ticks);     long p = Math.Min(DateTime.MaxValue.Ticks, Math.Abs(interval.Ticks));     // set alignment to earliest possible window     var a = alignment.ToUniversalTime().Ticks % p;     // verify constraints of this solution     if (d <= 0L) { throw new ArgumentOutOfRangeException("duration"); }     if (p == 0L || p > d) { throw new ArgumentOutOfRangeException("interval"); }     // find the alignment of window ends     long e = a + (d % p);     return source.AlterEventLifetime(         evt => ToDateTime(AdjustStartTime(evt.StartTime.ToUniversalTime().Ticks, e, p)),         evt => ToDateTime(AdjustEndTime(evt.EndTime.ToUniversalTime().Ticks, a, d, p)) -             ToDateTime(AdjustStartTime(evt.StartTime.ToUniversalTime().Ticks, e, p))); } public static DateTime ToDateTime(long ticks) {     // just snap to min or max value rather than under/overflowing     return ticks < DateTime.MinValue.Ticks         ? new DateTime(DateTime.MinValue.Ticks, DateTimeKind.Utc)         : ticks > DateTime.MaxValue.Ticks         ? new DateTime(DateTime.MaxValue.Ticks, DateTimeKind.Utc)         : new DateTime(ticks, DateTimeKind.Utc); } Finally, we can describe our custom hopping window operator: public static IQWindowedStreamable<T> HoppingWindow2<T>(     IQStreamable<T> source,     TimeSpan duration,     TimeSpan interval,     DateTime alignment) {     if (source == null) { throw new ArgumentNullException("source"); }     return SnapToWindowIntervals(source, duration, interval, alignment).SnapshotWindow(); } By switching from HoppingWindow to HoppingWindow2 in the following example, the query returns quickly rather than gobbling resources and ultimately failing! public void Main() {     var start = new DateTimeOffset(new DateTime(2012, 6, 28), TimeSpan.Zero);     var duration = TimeSpan.FromSeconds(5);     var interval = TimeSpan.FromSeconds(2);     var alignment = new DateTime(2012, 3, 15, 12, 0, 0, DateTimeKind.Utc);     var events = this.Application.DefineEnumerable(() => new[]     {         EdgeEvent.CreateStart(start.AddSeconds(0), "e0"),         EdgeEvent.CreateStart(start.AddSeconds(1), "e1"),         EdgeEvent.CreateEnd(start.AddSeconds(1), start.AddSeconds(2), "e1"),         EdgeEvent.CreateStart(start.AddSeconds(3), "e2"),         EdgeEvent.CreateStart(start.AddSeconds(9), "e3"),         EdgeEvent.CreateEnd(start.AddSeconds(3), start.AddSeconds(10), "e2"),         EdgeEvent.CreateEnd(start.AddSeconds(9), start.AddSeconds(10), "e3"),     }).ToStreamable(AdvanceTimeSettings.IncreasingStartTime);     var adjustedEvents = SnapToWindowIntervals(events, duration, interval, alignment);     var query = from win in HoppingWindow2(events, duration, interval, alignment)                 select win.Count();     DisplayResults(adjustedEvents, "Adjusted Events");     DisplayResults(query, "Query"); } As you can see, instead of producing a massive number of windows for the open start edge e0, a single window is emitted from 12:00:15 AM until the end of time: Adjusted Events StartTime EndTime Payload 6/28/2012 12:00:01 AM 12/31/9999 11:59:59 PM e0 6/28/2012 12:00:03 AM 6/28/2012 12:00:07 AM e1 6/28/2012 12:00:05 AM 6/28/2012 12:00:15 AM e2 6/28/2012 12:00:11 AM 6/28/2012 12:00:15 AM e3 Query StartTime EndTime Payload 6/28/2012 12:00:01 AM 6/28/2012 12:00:03 AM 1 6/28/2012 12:00:03 AM 6/28/2012 12:00:05 AM 2 6/28/2012 12:00:05 AM 6/28/2012 12:00:07 AM 3 6/28/2012 12:00:07 AM 6/28/2012 12:00:11 AM 2 6/28/2012 12:00:11 AM 6/28/2012 12:00:15 AM 3 6/28/2012 12:00:15 AM 12/31/9999 11:59:59 PM 1 Regards, The StreamInsight Team

    Read the article

  • Interpolation between two 3D points?

    - by meds
    I'm working with some splines which define a path a character follows (you can see a gameplay video here to get a better understanding of what's going on: http://www.youtube.com/watch?v=BndobjOiZ6g). Basically the characters 'forward' look direction is set to the 'forward' direction of the spline and when players tilt their phone left and right the character is strafed along its 'right' coordinate. The issue with this is (rather obviously) in performance, interpolating over a spline to find the nearest position and tangent relative to the player is an incredibly costly operation. To get by this I cache a finite number of positions in what I call 'SplineDetails', the class is as follows: public class SplineDetails { public SplineDetails() { Forward = Vector3.forward; Position = Vector3.one * float.MaxValue; Alpha = -1; } public float Alpha; // [0,1] measured along length of spline where 0 is the initial point and 1 is the end point of the spline public Vector3 Position; // the point of the spline at this alpha public Vector3 Forward; // the forward tangent of the spline at this alpha } I populate this with say 30 coordinates and I can give a rough estimate of a coordinate and 'forward' based on a position past in. It's not as accurate but it's much faster. But now I'd like to make the system work better by estimating positions and 'forward' directions by interpolating between two of the cached points though I'm stuck trying to figure out some logic. My first problem is, how can I determine between which two points the object is? Given each point can be placed at different intervals along the spline it could mean that two points in front or behind the object can be closer to the object. The other problem is to figure out the proportion between the two paths it's between, i.e. if there is a point a at coordinate (0,0,0) and point b at coordinate (1,0,0) if the object is at position (0.5,0,0) then the result it should give is '0.5' (as it is equal distance away from point a and point b). That's a simple example, but what if the object is at coordinate (0.5,3,0) for example?

    Read the article

  • Need help with ColdFusion and ASP.NET site [closed]

    - by Michael Stone
    To begin, I wasn't too sure how to title this.. I've got a few questions. First off, I've got a very big site that's in ColdFusion and we've been migrating to ASP.NET C# 4.0 the last 8 months. I've got a team of 7 programmers and no one can seem to figure out these answers, not even our senior C# programmer. We're using Team Foundation Server and we can't figure out how to only push up one small change at time. Right now we're stuck to publishing the entire site and it's causing serious issues. We've currently got the site as a Project and not a Website. We're wondering if that's one issue. I actually think it might be a problem. We're also dealing with an issue where we can't access our regular folders with relative paths. So we're first developing our admin side in .NET and We've got our regular site and then we've got another site within that for our .NET admin tools. By site, I'm referring to them actually being Sites in IIS. This also creates a problem for us when we're creating tools that upload images and want to store them and access them from our parent Site. I'd very much appreciate any advice on how to go about this in the most standardized way. So what I'm hoping for is advise on: -Publishing and managing a site/project in Team Foundation Server. Being able to push up one fix at a time if needed would be GREAT! -Any help figuring out the issuing referencing folders from my .NET child site to my parent ColdFusion site using regular relative paths. "/a/images/b/" would be nice nice instead of only being able to do "/b/images/" We're using ColdFusion 8, C# Asp.NET 4.0/Entity Framework/POCO Templates, and a Windows 2008 R2 Server. Thank you in advance for any help.

    Read the article

  • How do I find information on who links to my sites?

    - by bobdobbs
    I'm trying to figure out if there's a free way to get information on backlinks to my site. I've had webmaster tools and google analytics set up for years. But I can't find access to data about site backlinks in either toolset. Webmaster tools, under 'traffic'-'links to your site' gives me the same message for all of my sites: "No data available". I haven't been able to find anything in GA that gives any information on backlinks. I've heard of using "links:" as an operator in google search, but for each of my sites, this returns either zero or very few results in cases when I know I have many backlinks. Most of the links simple aren't shown. My thinking is that google maintains a graph of who links to my site, so I figured that they might let me see it. But I can't figure out how. I've found this tool on a spammy website: http://www.backlinkwatch.com. It offers more data than google on my backlines, and offers more results in exchange for a paid subscription. The data it offers for free looks good, but the results are limited and the site has popups and obnoxious ads. So, in short: how do I get data on who links to me? Is there a free way?

    Read the article

  • Triangulating a partially triangulated mesh (2D)

    - by teodron
    Referring to the above exhibits, this is the scenario I am working with: starting with a planar graph (in my case, a 2D mesh) with a given triangulation, based on a certain criterion, the graph nodes are labeled as RED and BLACK. (A) a subgraph containing all the RED nodes (with edges between only the directly connected neighbours) is formed (note: although this figure shows a tree forming, it may well happen that the subgraph contain loops) (B) Problem: I need to quickly build a triangulation around the subgraph (e.g. as shown in figure C), but under the constraint that I have to keep the already present edges in the final result. Question: Is there a fast way of achieving this given a partially triangulated mesh? Ideally, the complexity should be in the O(n) class. Some side-remarks: it would be nice for the triangulation algorithm to take into account a certain vertex priority when adding edges (e.g. it should always try to build a "1-ring" structure around the most important nodes first - I can implement iteratively such a routine, but it's O(n^2) ). it would also be nice to reflect somehow the "hop distance" when adding edges: add edges first between the nodes that were "closer" to each other given the start topology. Nevertheless, disregarding the remarks, is there an already known scenario similar to this one where a triangulation is built upon a partially given set of triangles/edges?

    Read the article

  • How do I boot to a windows recovery partition from GRUB in a Toshiba computer?

    - by Andy Groff
    This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

    Read the article

  • Booting to a windows recovery partition from GRUB

    - by Andy Groff
    This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

    Read the article

  • Including Microsoft.XNA.Framework.Input.Touch in a project?

    - by steven_desu
    So after running through tutorials by both Microsoft and www.xnadevelopment.com I feel very confident in my ability to get to work on my first game using the XNA Framework. I've manipulated sprites, added audio, changed game states, and even went a step further to apply the knowledge I had and figure out how to make animations and basic 2-dimensional physics (including impulses, force, acceleration, and speed calculations) But then shortly into the project I hit a curious bump that I've been unable to figure out. In wanting to implement menus, pause screens, and several different aspects of play (a "pre-level" prep screen, the level itself, and a screen after the level to review how well you did) I took a look at Microsoft's Game State Management sample. I understood the concept, although it was admittedly quite a lot to take in. Not wanting to recreate the entire concept by scratch (after all- what purpose would that serve?) I tried copying and pasting the sample code into my own ScreenManager class (as well as InputState and GameScreen classes) to try and borrow their ingenuity. When I did this, however, my project stopped compiling. I was getting the following error: The type or namespace name 'Touch' does not exist in the namespace 'Microsoft.Xna.Framework.Input' (are you missing an assembly reference?) Having read through their sample code already, I realized that this namespace and every function and class within it could be safely ripped from the code without losing functionality. It's a namespace simply for integrating with touchscreen devices (presumably Windows Phone 7, but maybe also tablets). But then I began to wonder- how come Microsoft's sample compiled but mine didn't? I copied their code exactly so there must be a setting somewhere that I need to change in Visual Studio in order to correct this. I tried creating a new project as a Windows Phone 7 game rather than a Windows game, however that only forced it to compile to a Windows Phone emulator and denied me the ability to change the resolution and other features which I clearly had the power to do in the sample code. So my question is simple - how do I properly use the namespace Microsoft.XNA.Framework.Input.Touch?

    Read the article

  • How to avoid jumping to a solution when under pressure? [closed]

    - by GlenPeterson
    When under a particularly strict programming deadline (like an hour), if I panic at all, my tendency is to jump into coding without a real plan and hope I figure it out as I go along. Given enough time, this can work, but in an interview it's been pretty unsuccessful, if not downright counter-productive. I'm not always comfortable sitting there thinking while the clock ticks away. Is there a checklist or are there techniques to recognize when you understand the problem well enough to start coding? Maybe don't touch the keyboard for the first 5-10 minutes of the problem? At what point do you give up and code a brute-force solution with the hope of reasoning out a better solution later? When is it most productive to think and design more vs. code some experiments to and figure out the design later? Here is a list of techniques for taking a math test and another for taking an oral exam. Is there is a similar list of techniques for handling a programming problem under pressure? ANSWERS: I think this is a valid answer: How To Solve It. I found the link as an answer to Steps to solve or approach towards a solution. There were also some really good tips at Is thinking out loud during an interview really the best strategy?. A great and concise argument for TDD is the first answer to TDD Writing code vs Figuring out the answer to a problem?. My question may be a near-duplicate of that one.

    Read the article

  • Is white the best base color to start with when planning to shade sprites within Unity?

    - by SpartanDonut
    I'm looking into prototyping a game in Unity which will consist of solid square sprites / tiles. I figure I can represent different types of objects with different colors for each of the tiles in the game. I figure that I can import a single square sprite and shade it appropriately in Unity as opposed to imported squares of many different colors. My experience with adjusting the hue and saturation within Photoshop shows that white is not an easy color to change as things that are white often stay white. My testing in Unity shows that I can change the "color" of a sprite to anything other than white and the sprite is seemingly shaded appropriately, despite what I would have thought given my Photoshop experience. Since white objects do seem to take on the appropriate color shading when changed within Unity my gut tells me that this is the best base color to begin with, meaning that I can import a single white square sprite and simply adjust the color to represent different objects and object states. Is a white sprite actually the best color sprite to begin with and why does something like this work in Unity as opposed to adjusting the hue and saturation within Photoshop?

    Read the article

  • Webmatrix The Site has Stopped Fix

    - by Tarun Arora
    I just got started with AzureWebSites by creating a website by choosing the Wordpress template. Next I tried to install WebMatrix so that I could run the website locally. Every time I tried to run my website from WebMatrix I hit the message “The following site has stopped ‘xxx’” Step 00 – Analysis It took a bit of time to figure out that WebMatrix makes use of IISExpress. But it was easy to figure out that IISExpress was not showing up in the system tray when I started WebMatrix. This was a good indication that IISExpress is having some trouble starting up. So, I opened CMD prompt and tried to run IISExpress.exe this resulted in the below error message So, I ran IISExpress.exe /trace:Error this gave more detailed reason for failure Step 1 – Fixing “The following site has stopped ‘xxx’” Further analysis revealed that the IIS Express config file had been corrupted. So, I navigated to C:\Users\<UserName>\Documents\IISExpress\config and deleted the files applicationhost.config, aspnet.config and redirection.config (please take a backup of these files before deleting them). Come back to CMD and run IISExpress /trace:Error IIS Express successfully started and parked itself in the system tray icon. I opened up WebMatrix and clicked Run, this time the default site successfully loaded up in the browser without any failures. Step 2 – Download WordPress Azure WebSite using WebMatrix Because the config files ‘applicationhost.config’, ‘aspnet.config’ and ‘redirection.config’ were deleted I lost the settings of my Azure based WordPress site that I had downloaded to run from WebMatrix. This was simple to sort out… Open up WebMatrix and go to the Remote tab, click on Download Export the PublishSettings file from Azure Management Portal and upload it on the pop up you get when you had clicked Download in the previous step Now you should have your Azure WordPress website all set up & running from WebMatrix. Enjoy!

    Read the article

  • Finite Numbers and ExplorerCanvas

    - by PhubarBaz
    I was working on my online mathematical graphing application, CloudGraph, and trying to make it work in IE. The app uses the HTML5 canvas element to draw graphs. Since IE doesn't support canvas yet I use ExplorerCanvas to provide that support for IE. However, it seems that when using excanvas, if you try to moveTo or drawTo a point that is not finite it loses it's mind and stops drawing anything else after that. I had no such problems in Firefox or Chrome so it took me awhile to figure out what was going on. Next I discovered that I needed a way to check if a variable was NaN or Inifinity or any other non-finite value so I could avoid calling moveTo() in that case. I started writing a long if statement, then I thought there has to be a better way. Sure enough there was. There just happens to be an isFinite() function built into Javascript just for this purpose. Who knew! It works great. Another difference I discovered with excanvas is that you must specify a starting point using a moveTo() when beginning a drawing path. Again, Chrome and Firefox are a lot more forgiving in this area so it took me a while to figure out why my lines weren't drawing. But, all is happy now and I'm a little wiser to the ways of the canvas.

    Read the article

  • How do I boot to a windows recovery partition from GRUB on a Toshiba computer?

    - by Andy Groff
    This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

    Read the article

  • Creating a steady rhythm for music-based game in XNA

    - by A-Type
    I'm looking to develop a game for Windows Phone to explore an idea I had which involves the user building notes into a sequencer while playing a puzzle game. The issue I'm running into is that, while my implementation is very close to being on-beat, there is the occasional pause between beats which makes the whole thing sound sloppy. I'm just not sure how to get around this inside XNA's infrastructure. Currently I'm running this code in the Update method of my GameBoard: public void Update(GameTime gameTime) { onBeat = IsOnBeat(gameTime); [...] if (onBeat) BeatUpdate(); } private bool IsOnBeat(GameTime gameTime) { beatTime += gameTime.ElapsedGameTime.TotalSeconds; if (Math.Abs(beatTime - beatLength) < 0.0166666) { beatTime -= beatLength; return true; } return false; } private void BeatUpdate() { cursor.BeatUpdate(); board.CursorPass((int)cursor.CursorPosition % Board.GRID_WIDTH); } Update checks to see if the time is on beat, and if it is, it calls the BeatUpdate method which moves the cursor over the board (sequencer). The cursor reports its X position to the board, which then plays any notes which are in that position on the sequencer. Notes are SoundEffectInstances, preloaded and ready to play. Oh, and TargetElapsedTime is set to 166666, or 60FPS target. Obviously totaling up the time and then subtracting isn't the most accurate way to go but I can't figure out a way to work within XNA's system in order to overcome this issue. This current system is just horribly unstable. Beats lag and fire too early and it's obvious. I thought about perhaps some sort of threaded solution but I'm not familiar enough with multithreading to figure out how that would work. Any ideas?

    Read the article

  • Not recognized as operating system on startup

    - by mastabruce
    I am new to Ubuntu and just decided to install it in (on my new lenovo thinkpad) in addition to my windows 7 operating system. Now, whenever I reboot the computer, it only runs window 7. I went (in windows) to Control Pannel ? System ? Advanced Settings ? Startup and Ubuntu is not even listed as a choice for operating system. I tried installing ubuntu again, but now it wants to partition the already partitioned windows folder. I can't figure out how to get Ubuntu, which seems to be installed, to run. I saw on another question here that I could be able to edit my mrb settings using EasyBCD but I can not figure out how to choose ubuntu as an operating system. My disk is already partitioned (seen from the attempted second install) so I'm pretty sure it is on the disk. Basically, how can I get ubuntu to run when I can't choose it as an operating system? Thank you for your help.

    Read the article

  • Co-worker renamed all of my queries

    - by anon
    I don't know if I should be very irritated or what. I single handedly built over 300 queries for a large database, and developed a naming convention so I could find them later. No one else in my office even knows how to build a query, but I came in yesterday to find that all of them had been renamed. I am now having a very hard time finding things, and I am trying to figure out what to do. I spoke with the person responsible, and she just downplayed the whole thing. She said she renamed them so she can find them more easily. Unfortunately, I am the only one who knows how to build, edit, and maintain them, and the only reason she needed to find them was to test the queries. The new naming convention doesn't make sense at all, and I feel like we have taken a backwards step in the development process. What I'm trying to figure out is: 1) Am I overreacting? 2) What is the best way to handle this? I hate to mention this to my boss, but after speaking with my co-worker yesterday, I can already tell she feels like she did nothing wrong.

    Read the article

  • Cocos2D: Change animation based on joystick direction

    - by Blade
    I'm trying to get my figure to look in the right directions, based on the input of the joystick. So if I tilt left it looks left and the left animation is used, if I used right, it looks right and right animation is used, if up, then up, down, down and so on. I just get animation for front and back. Also if I press up I see the back of the figure correctly, but it won't go back into the original state when I don't press up anymore. -(void)applyJoystick:(SneakyJoystick *)aJoystick forTimeDelta:(float) deltaTime { CGPoint scaledVelocity = ccpMult(aJoystick.velocity, 128.0f); CGPoint oldPosition = [self position]; CGPoint newPosition = ccp(oldPosition.x + scaledVelocity.x * deltaTime, oldPosition.y + scaledVelocity.y * deltaTime); [self setPosition:newPosition]; id action = nil; int extra = 50; if ((int) aJoystick.degrees > 180 - extra && aJoystick.degrees < 180 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimLeft restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 360 - extra && aJoystick.degrees < 360 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimRight restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 90 - extra && aJoystick.degrees < 90 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimBack restoreOriginalFrame:NO]; } else if ((int) aJoystick.degrees > 270 - extra && aJoystick.degrees < 270 + extra) { action = [CCAnimate actionWithAnimation:walkingAnimFront restoreOriginalFrame:NO]; } if (action != nil) { [self runAction:action]; } } }

    Read the article

  • MVC 4 Authentication

    - by Aligned
    First: After searching for awhile to figure out what’s new/different with MVC 4 and forms authentication, this is the best article I've found on the subject: http://weblogs.asp.net/jgalloway/archive/2012/08/29/simplemembership-membership-providers-universal-providers-and-the-new-asp-net-4-5-web-forms-and-asp-net-mvc-4-templates.aspx Some quotes from the article: “The ASP.NET Web Pages team designed SimpleMembership to (wait for it) simplify the task of dealing with membership” "WSAT is built to work with ASP.NET Membership, and is not compatible with Simple Membership. There are two main options there: Use the WebSecurity and OAuthWebSecurity API to manage the users and roles Create a web admin using the above APIs Since SimpleMembership runs on top of your database, you can update your users as you would any other data - via EF or even in direct database edits (in development, of course)" “If you want to use an existing ASP.NET Membership Provider in ASP.NET MVC 4, you can't use the new AccountController. You can do a few things:” “Universal Providers do not work with Simple Membership.” ~ this post (look for Bob.at.SBS’s answer) says Universal Providers is not needed for MVC 4 to work in Azure)   I've been trying to figure out the Forms Authentication in MVC4. It's different than the past approach (aspnet_regsql). If you do file new project -> MVC 4 -> internet application, you get a really nice template with the controller and model setup for you. However, the tables are different than using aspnet_regsql and the ASP.Net Configuration tool (WSAT) wasn’t connecting to the data I had (it was creating an App_Data/aspnet.mdf file, which I didn’t see right away). Points of Note The database tables are created in the SimpleMembershipInitializer class, when you first run your app using Entity Framework 5 migration functionality. The tables created are webpages_Membership, webpages_OAuthMembership, webpages_Roles, webpages_UsersInRoles, UserProfile. Web.config settings don’t seem to be needed.   Scott Hanselman on Universal Providers was also useful if not somewhat out dated. Universal Providers and SimpleMembership are not compatible. http://www.asp.net/web-pages/tutorials/security/16-adding-security-and-membership – walk-through

    Read the article

  • Laser range finder, what language to use? Beginner advice

    - by DrOnline
    I hope this is the right place. I am a programming beginner, and I want to make a laser range finder, and I need advice about how to proceed etc. In a few weeks I will get a lot of dirt cheap 3-5V lasers and some cheap usb webcams. I will point the laser and webcam in parallel, and somehow use trigonometry and programming to determined distance. I have seen online that others made done it this way, I have purposefully not looked at the details too much because I want to develop it on my own, and learn, but I know the general outline. I have a general idea of how to proceed. The program loads in a picture from the webcam, and I dunno how images work really, but I imagine there is a format that is basically an array of RGB values.. is this right? I will load in the red values, and find the most red one. I know the height difference between the laser and the cam. I know the center dot in the image, I know the redmost dot. I'm sure there's some way to figure out some range there. TO THE POINT: 1) Is my reasoning sound thus far, especially in terms of image analysis? I don't need complete solutions, just general points 2) What I need to figure out, is what platform to use. I have an arduino... apparently, I've read it's too weak to process images. Read that online. I know some C I know some Python I have Matlab. Which is the best option? I do not need high sampling rates, I have not decided on whether it should be automated or whether I should make a GUI with a button to press for samples. I will keep it simple and expand I think. I also do not need it to be super accurate, I'm just having fun here. Advice!

    Read the article

  • Matching users based on a series of questions

    - by SeanWM
    I'm trying to figure out a way to match users based on specific personality traits. Each trait will have its own category. I figure in my user table I'll add a column for each category: id name cat1 cat2 cat3 1 Sean ? ? ? 2 Other ? ? ? Let's say I ask each user 3 questions in each category. For each question, you can answer one of the following: No, Maybe, Yes How would I calculate one number based off the answers in those 3 questions that would hold a value I can compare other users to? I was thinking having some sort of weight. Like: No -> 0 Maybe -> 1 Yes -> 2 Then doing some sort of meaningful calculation. I want to end up with something like this so I can query the users and find who matches close: id name cat1 cat2 cat3 1 Sean 4 5 1 2 Other 1 2 5 In the situation above, the users don't really match. I'd want to match with someone with a +1 or -1 of my score in each category. I'm not a math guy so I'm just looking for some ideas to get me started.

    Read the article

  • "Invalid Handle Object" when plotting 2 figures Matlab

    - by pinnacler
    I'm having a difficult time understanding the paradigm of Matlab classes vs compared to c++. I wrote code the other day, and I thought it should work. It did not... until I added <handle after the classdef. So I have two classes, landmarks and robot, both are called from within the simulation class. This is the main loop of obj.simulation.animate() and it works, until I try to plot two things at once. DATA.path is a record of all the places a robot has been on the map, and it's updated every time the position is updated. When I try to plot it, by uncommenting the two marked lines below, I get this error: ??? Error using == set Invalid handle object. Error in == simulationsimulation.animate at 45 set(l.lm,'XData',obj.landmarks.apparentPositions(:,1),'YData',obj.landmarks.apparentPositions(:,2)); %INITIALIZE GLOBALS global DATA XX XX = [obj.robot.x ; obj.robot.y]; DATA.i=1; DATA.path = XX; %Setup Plots fig=figure; xlabel('meters'), ylabel('meters') set(fig, 'name', 'Phil''s AWESOME 80''s Robot Simulator') xymax = obj.landmarks.mapSize*3; xymin = -(obj.landmarks.mapSize*3); l.lm=scatter([0],[0],'b+'); %"UNCOMMENT ME"l.pth= plot(0,0,'k.','markersize',2,'erasemode','background'); % vehicle path axis([xymin xymax xymin xymax]); %Simulation Loop for n = 1:720, %Calculate and Set Heading/Location XX = [obj.robot.x;obj.robot.y]; store_data(XX); if n == 120, DATA.path end %Update Position headingChange = navigate(n); obj.robot.updatePosition(headingChange); obj.landmarks.updatePerspective(obj.robot.heading, obj.robot.x, obj.robot.y); %Animate %"UNCOMMENT ME" set(l.pth, 'xdata', DATA.path(1,1:DATA.i), 'ydata', DATA.path(2,1:DATA.i)); set(l.lm,'XData',obj.landmarks.apparentPositions(:,1),'YData',obj.landmarks.apparentPositions(:,2)); rectangle('Position',[-2,-2,4,4]); drawnow This is the classdef for landmarks classdef landmarks <handle properties fixedPositions; %# positions in a fixed coordinate system. [ x, y ] mapSize; %Map Size. Value is side of square x; y; heading; headingChange; end properties (Dependent) apparentPositions end methods function obj = landmarks(mapSize, numberOfTrees) obj.mapSize = mapSize; obj.fixedPositions = obj.mapSize * rand([numberOfTrees, 2]) .* sign(rand([numberOfTrees, 2]) - 0.5); end function apparent = get.apparentPositions(obj) currentPosition = [obj.x ; obj.y]; apparent = bsxfun(@minus,(obj.fixedPositions)',currentPosition)'; apparent = ([cosd(obj.heading) -sind(obj.heading) ; sind(obj.heading) cosd(obj.heading)] * (apparent)')'; end function updatePerspective(obj,tempHeading,tempX,tempY) obj.heading = tempHeading; obj.x = tempX; obj.y = tempY; end end end To me, this is how I understand things. I created a figure l.lm that has about 100 xy points. I can rotate this figure by using set(l.lm,'XData',obj.landmarks.apparentPositions(:,1),'YData',obj.landmarks.apparentPositions(:,2)); When I do that, things work. When I try to plot a second group of XY points, stored in DATA.path, it craps out and I can't figure out why.

    Read the article

  • matplotlib and python multithread file processing

    - by Napseis
    I have a large number of files to process. I have written a script that get, sort and plot the datas I want. So far, so good. I have tested it and it gives the desired result. Then I wanted to do this using multithreading. I have looked into the doc and examples on the internet, and using one thread in my program works fine. But when I use more, at some point I get random matplotlib error, and I suspect some conflict there, even though I use a function with names for the plots, and iI can't see where the problem could be. Here is the whole script should you need more comment, i'll add them. Thank you. #!/usr/bin/python import matplotlib matplotlib.use('GTKAgg') import numpy as np from scipy.interpolate import griddata import matplotlib.pyplot as plt import matplotlib.colors as mcl from matplotlib import rc #for latex import time as tm import sys import threading import Queue #queue in 3.2 and Queue in 2.7 ! import pdb #the debugger rc('text', usetex=True)#for latex map=0 #initialize the map index. It will be use to index the array like this: array[map,[x,y]] time=np.zeros(1) #an array to store the time middle_h=np.zeros((0,3)) #x phi c #for the middle of the box current_file=open("single_void_cyl_periodic_phi_c_middle_h_out",'r') for line in current_file: if line.startswith('# === time'): map+=1 np.append(time,[float(line.strip('# === time '))]) elif line.startswith('#'): pass else: v=np.fromstring(line,dtype=float,sep=' ') middle_h=np.vstack( (middle_h,v[[1,3,4]]) ) current_file.close() middle_h=middle_h.reshape((map,-1,3)) #3d array: map, x, phi,c ##### def load_and_plot(): #will load a map file, and plot it along with the corresponding profile loaded before while not exit_flag: print("fecthing work ...") #try: if not tasks_queue.empty(): map_index=tasks_queue.get() print("----> working on map: %s" %map_index) x,y,zp=np.loadtxt("single_void_cyl_growth_periodic_post_map_"+str(map_index),unpack=True, usecols=[1, 2,3]) for i,el in enumerate(zp): if el<0.: zp[i]=0. xv=np.unique(x) yv=np.unique(y) X,Y= np.meshgrid(xv,yv) Z = griddata((x, y), zp, (X, Y),method='nearest') figure=plt.figure(num=map_index,figsize=(14, 8)) ax1=plt.subplot2grid((2,2),(0,0)) ax1.plot(middle_h[map_index,:,0],middle_h[map_index,:,1],'*b') ax1.grid(True) ax1.axis([-15, 15, 0, 1]) ax1.set_title('Profiles') ax1.set_ylabel(r'$\phi$') ax1.set_xlabel('x') ax2=plt.subplot2grid((2,2),(1,0)) ax2.plot(middle_h[map_index,:,0],middle_h[map_index,:,2],'*r') ax2.grid(True) ax2.axis([-15, 15, 0, 1]) ax2.set_ylabel('c') ax2.set_xlabel('x') ax3=plt.subplot2grid((2,2),(0,1),rowspan=2,aspect='equal') sub_contour=ax3.contourf(X,Y,Z,np.linspace(0,1,11),vmin=0.) figure.colorbar(sub_contour,ax=ax3) figure.savefig('single_void_cyl_'+str(map_index)+'.png') plt.close(map_index) tasks_queue.task_done() else: print("nothing left to do, other threads finishing,sleeping 2 seconds...") tm.sleep(2) # except: # print("failed this time: %s" %map_index+". Sleeping 2 seconds") # tm.sleep(2) ##### exit_flag=0 nb_threads=2 tasks_queue=Queue.Queue() threads_list=[] jobs=list(range(map)) #each job is composed of a map print("inserting jobs in the queue...") for job in jobs: tasks_queue.put(job) print("done") #launch the threads for i in range(nb_threads): working_bee=threading.Thread(target=load_and_plot) working_bee.daemon=True print("starting thread "+str(i)+' ...') threads_list.append(working_bee) working_bee.start() #wait for all tasks to be treated tasks_queue.join() #flip the flag, so the threads know it's time to stop exit_flag=1 for t in threads_list: print("waiting for threads %s to stop..."%t) t.join() print("all threads stopped")

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >