Search Results

Search found 74454 results on 2979 pages for 'hardware problem'.

Page 22/2979 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • UEFI hardware and dual booting with windows

    - by user39803
    I've been struggling for 3 days trying to dual boot Ubuntu 11.10 and Windows 7. I want to use an SSD for my Ubuntu installation and an hdd for Windows. I realized that I have to install windows first and then ubuntu, and so I did that. When I first install windows it boots fine from my hdd, but when I add ubuntu on my ssd and restart, I get a black screen with a blinking cursor. I've read many forums where this is asked but haven't found a single solution that works. I've tried boot repair. It told me to make a fat ESP partition and I did that as well but it still doesn't work. I'm a noob and any suggestions would be really appreciated.

    Read the article

  • Ubuntu 14.04 install on hardware with RAID

    - by nolak
    I've just built a new machine using an ASUS Mobo with 8GB of RAM and set up RAID 10 with 4 new HDD. I want to install Ubuntu 14.04 on it and so far have tried to do so 3 times with no luck. The installation seems to work fine but after it has finished it restarts and all I get is a black screen. Is there something I am missing? I've completed the install on other machines before without issue I just never tried it on a machine with RAID set up.

    Read the article

  • Hardware doesn't work some times

    - by Ali
    I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

    Read the article

  • Gathering buslogic SCSI hardware and virtual machine operating system

    - by Julian
    I'm trying to use Powershell to get SCSI hardware from several virtual servers and get the operating system of each specific server. I've managed to get the specific SCSI hardware that I want to find with my code, however I'm unable to figure out how to properly get the operating system of each of the servers. Also, I'm trying to send all the data that I find into a csv log file, however I'm unsure of how you can make a powershell script create multiple columns. Here is my code (almost works but something's wrong): $log = "C:\Users\me\Documents\Scripts\ScsiLog.csv" Get-VM | Foreach-Object { $vm = $_ Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } | Foreach-Object { get-VMGuest -VM $vm } | Foreach-Object{ Write-output $vm.Guest.VmName >> $log } } I don't receive any errors when I run this code however whenever I run it I'm only getting the name of the servers and not the OS. Also I'm not sure what I need to do to make the OS appear in a different column from the name of the server in the csv log that I'm creating. What do I need to change in my code to get the OS version of each virtual machine and output it in a different column in my csv log file? EDIT: Here's a more in depth look at things I've tried that have all failed: Get-VM | Foreach-Object { $vm = $_ $svm = Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } Foreach-Object {get-VMGuest -VM $svm } | Foreach-Object{Write-output $svm >> $log} } #Get-VM | Foreach-Object { # $vm = $_ # Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic"} #| write-host $vm # | Foreach-Object { # # #get-VMGuest -VM $_ | # #write-host $vm # #get-VMGuest -VM $vm } | Foreach-Object{ # #write-output $vm.VmName >> $log # #write-output $vm.guest.VmName, get-VmGuest -VM $vm >> $log NO GOOD # # Write-host $vm.Guest.VmName #+ get-vmGuest -vm $VM >> $log # # # } # } I'm not sure why get-VmGuest fails though. I'm getting the scsi hardware, filtering the hardware to only get buslogic, and then wanting to get the operating system of just the filtered VMs. I don't see where my code fails though.

    Read the article

  • Site failing randomly - could it be Cloudflare or something weird in the JS?

    - by James
    I've been working on a simple site that uses javascript to fade through some fullscreen background images as well as some other simple animations. I've tested the site on Chrome, Safari, FF and Opera on OSX, IE8+ on Win7 and Chrome & FF on Ubuntu and everything looks as I'd expect it to. However, I've had reports of the site failing to load (stops at the stage where the background fades up) on Safari and Chrome on OSX and Win. I can't replicate this on any setup so I'm finding it impossible to troubleshoot. Google's instant preview shows the site fine as does most of the options at browsershots.org so I'm really scratching my head. I'm running the site's traffic through Cloudflare and I'm wondering whether anyone can see (or knows from other sites) why Cloudflare might be mangling the JS or causing a problem somehow (I don't get any errors in the JS error console). Of course, if you can replicate the problem on your machine and can suggest an area to look at that would be amazing but I'm hoping that, like me, you don't see any problem with the site! Here's the site: http://www.bighornrevelstoke.com Thanks, James

    Read the article

  • Hardware error messages from syslogd

    - by Farhat
    I have a 64-core AMD server running CEntOS on which I was running a long job. In the midst of the output, I see these lines. It appears to be a memory error. How severe is this and what exactly does it indicate? Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: MC4_STATUS[Over|CE|MiscV|-|AddrV|-|-|CECC]: 0xdc10410040080a13 Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: Northbridge Error (node 4): DRAM ECC error detected on the NB. Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)

    Read the article

  • Hardware firewall vs VMWare firewall appliance

    - by Luke
    We have a debate in our office going on whether it's necessary to get a hardware firewall or set up a virtual one on our VMWare cluster. Our environment consists of 3 server nodes (16 cores w/ 64 GB RAM each) over 2x 1 GB switches w/ an iSCSI shared storage array. Assuming that we would be dedicating resources to the VMWare appliances, would we have any benefit of choosing a hardware firewall over a virtual one? If we choose to use a hardware firewall, how would a dedicated server firewall w/ something like ClearOS compare to a Cisco firewall?

    Read the article

  • Problem with using sysprep tool for running Windows on a different Hardware

    - by Usman Ajmal
    Hi, I am using sysprep tool for running Windows 7 on a different Hardware. What I do is that run sysprep on a computer, select System Audit, check the Generalize check box, select Shutdown, click OK and wait for the computer to shutdown. When the system shuts down, I remove the hard disk from my computer and plug it into another computer having different Hardware. Then I turn ON the computer and after a series of operations (including one reboot), I eventually get to the Desktop of Windows on the changed hardware computer BUT the problem is that System Preparation Tool's start up automatically. I rebooted the computer but the System Preparation Tool start up each time. One more thing that noted was that computer gives a message at each reboot before loading Desktop that "System is now preparing your computer for first use". Any idea how can i get a clean Desktop after performing sysprep? or is there any step I am missing? Thanks a lot

    Read the article

  • Need Recommendations: Network Software and Hardware Setup for small firm

    - by Rogue
    Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

    Read the article

  • Local dedicated hosting space (own hardware)

    - by Scott
    Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

    Read the article

  • Deciding to use VM or native install for new hardware

    - by Billy Moon
    I have a Ubuntu 10.10 installation running on hardware. I upgraded the hardware, and am planning to move the system over. Whilst reading the many various ways to do this, I came across tools for making a virtual machine out of a hardware installation. I think this might make managing my server easier in the future if I run it as a virtual machine. Also, I will be able to easily split responsibilities of my server, for example running MySQL on a separate virtual machine hosted on the same physical machine. Is it a good idea to install my production server as a virtual machine inside another thin server installation? What are the pros/cons and pitfalls?

    Read the article

  • (When) Does hardware, especially the CPU(s), deliver wrong results?

    - by sub
    What I'm talking about is: Is it possible that under certain circumstances the CPU "buggs" and suddenly responses 1+1=2? In which parts of the computer can that happen (HDD, RAM, Mainboard)? What could be the causes? Bad quality? Overheating? Does that even happen? When yes, how frequently? If everything is okay with the CPU (not a single fault in production, good temperature), can that still happen sometimes? What would be the results of, let's say one to three wrong computations? This is programming related as it would be nice to know if you can even rely on the hardware to return the right results.

    Read the article

  • Freeze during Battlefield 3 - Probable Hardware issue?

    - by HendsteR
    my friend's notebook frequently freezes during BF3 sessions since ~1 1/2 months. It runs Win764Bit and he already reinstalled windows during the process, it didn't help. So we guess it might probably be a hardware issue. Now the question - which part of the hardware could effect a total freeze of the system WITHOUT getting a bluescreen? Or are there any known software issues he could also try? The hardware specs are: Acer 7745G Intel i7 720QM AMD Mobility 5850HD - Running Catalyst 11.6 now btw. (all drivers tested from 11.2 to 12.6 though) 4GB Ram 1.333MHz Oh and yeah, he just added that it crashes playing Diablo3 from time to time, too. Please help :)

    Read the article

  • Mac OS X 10.5 VNC Resolution independent of hardware display

    - by Qberticus
    Is it possible to set the VNC display resolution that is independent of the hardware resolution when you are using OS X 10.5 Screen Sharing? I have a macbook and a windows box with 3 monitors. I'd like to use the 3 monitors on my windows box to do work on my macbook when I'm at my desk. When I VNC into the macbook I only get the resolution of the hardware screen (1280x800). Instead I'd like to use two of my monitors on my windows box to display a large VNC screen from my macbook. The scaling options in the VNC clients (TightVNC and Ultr@VNC) do not adjust the actual resolution of the display they just do image processing. My ultimate goal is for someway to have a virtual display on my windows box that is from my macbook that is independent of the macbook's hardware screen.

    Read the article

  • When machine code is generated from a program how does it translates to hardware level operations ??

    - by user553492
    Like if say the instruction is something like 100010101 1010101 01010101 011101010101. Now how is this translating to an actual job of deleting something from memory? Memory consists of actual physical transistors the HOLD data. What causes them to lose that data is some external signal? I want to know how that signal is generated. Like how some binary numbers change the state of a physical transistor. Is there a level beyond machine code that isn't explicitly visible to a programmer? I have heard of microcode that handle code at hardware level, even below assembly language. But still I pretty much don't understand. Thanks!

    Read the article

  • HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

    - by Chris Hoffman
    IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled:  Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr     

    Read the article

  • Problem installing Ubuntu 10.04 64 bit side by side with Vista by using a bootable USB drive. What n

    - by Adam Siddhi
    What happened I decided to install Ubuntu 10.04 64 bit side by side with Vista Home Premium (I guess on another partition) with a USB stick. I found instructions on how to do this here: https://help.ubuntu.com/community/Installation/FromUSBStick To create the bootable USB drive I had to download a program called Unetbootin. That process was simple enough. All I had to do was just choose the disk image option, select the ubuntu-10.04-desktop-amd64.iso image, make sure it recognizes my USB drive and then press OK. It takes only like a few minutes to create a working bootable USB drive. Then I have to restart my computer, enter the BIOS, select my USB drive as the first boot drive, save options and continue with booting up. After this Ubuntu actually loads up. I think this is known as the Live version of Ubuntu so you can try it out before fully installing it. Any ways, on the Ubuntu 10.04 desktop I saw an installer. I click it and begin the installation process. Just so you know, I tried installing it 2 times. I will explain what happened each time: The first time I tried installing Ubuntu 10.04 I got stuck at step 4 of 7. I remember selecting the last option in the window which was Specify Partitions Manually (Advanced) I made my partition for Ubuntu like 52 gigs. I clicked forward and a little pop up window appeared saying Please Wait. So the installation process stalled on this window so I closed out of it and quit the installation process. So at this point I was worried because I had already selected the partition size and assumed it started making it. Since it stalled I had to quit out though. Anyways, once again I reached step 4 of 7 a decided to select the first option which is Install them side by side choosing between them each startup. I figured this was the safe way to go. I did that and the pop up window saying Please Wait popped up again but lasted only like 10 seconds. Then I got to I guess step 6 where it asks you to enter your desired name and password. Did that and clicked forward. The Ubuntu 10.04 installation load screen appeared and the loading bar at the bottom started filling up. So I got to 83% and stalled during the Importing other profile information (I think it was called this. I had the option to do this during I think step 6) process. So at this point I decided to get stop the installation process. I was getting very nervous. I tried to restart the computer but all that happened was that Ubuntu restarted. I finally got the computer to restart. I was pretty sure I had screwed something up big time by this point. As my computer was restarting I entered BIOS again and switched back to it booting from my main hard drive containing Vista. Saved it and continued the boot process. My worst fears were confirmed as Vista would not boot up. I mean I saw the little Microsoft Windows choppy animated green loading bar at the bottom of the screen and then boom! It decided to restart. When it restarted I had the option to run a memory test check to see if there was anything that needed to be repaired. That took like 20 minutes and at the end I saw that I did indeed have to repair something. I had to go through 2 repair processes. After each I had to restart the computer. The 2nd time it went through the repair process it said that it could not fully repair the damage. I was scared and restarted but Vista did load up. I got to my desktop and saw a message saying something like Repairs have been made, Please restart for changes to take effect I noticed that some Notification icons were missing and I could not hear volume in a video. Things were a bit funky. So I did restart and here I am. Now what?! So since I got back into Vista and thankfully have a working Internet connection I am trying to find answers to my problem (that is why I am writing this post). I am scared that I have partioned my hard drive 2 times after researching Installing Ubuntu 10.04 and seeing this post http://techie-buzz.com/foss/ubuntu-10-04-lts-installation-guide.html The author shows screen shots of installing Ubuntu 10.04. He shows the image of step 4 of 7 with a caption at the bottom. I will recreate it below: Select a partitioning option. Unless you want to format all the hard drive and install Ubuntu afresh, select the last option and proceed. Questions If I have indeed partitioned my HD 2 times (which I am sure it is), how do I get to a point where I can see all my bad, unfinished Ubuntu partitions and get rid of them? How do I clean this big mess up? & How can I ensure that this mess will not happen next time I try installing Ubuntu 10.04? Thank you Adam

    Read the article

  • Stats on Screen Size for Flash Games

    - by ashes999
    I'm working on a Flash game after many, many years. I'm trying to figure out size to make my application run (eg. 600x800). Because it's a tall (not wide) game, I'm confused. I know about (and love) the Steam hardware stats. However, for Flash gaming, I have two nit-picks with their survey sample: 1) Caters to more hardcore gamers with better hardware (overall) 2) Captures only a subset of Flash gamers. Doesn't capture people who play at school, work, etc. or not netbooks and lighter machines. Are there any sort of statistics I can use to determine which size to use? Ideally, I would like to know something like: 800x600 will fit 94% of users screens 1024x768 will fit 74% of users screens 1200x960 will fit 53% of users screens etc.

    Read the article

  • Error in mounting HDD

    - by Vikramjeet
    I am getting the following error whenever I mount my external HDD. It was working before and then I opted for safely removing the drive. Now its giving me following error Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup_warn: magic: 0x43425355 size: 4096 usa_ofs: 8850 usa_count: 65535: Invalid argument Actual VCN (0x800006009000000) of index buffer is different from expected VCN (0x0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

    Read the article

  • Running Ubuntu on Vaio laptops

    - by Deepak Adhikari
    I am an Ubuntu user... and willing to buy a laptop for my undergraduate study, but the brand which I am likely to buy does not fall on Ubuntu certified hardware. I am willing to buy vaio S series laptop. Can anyone answer my following questions? will Ubuntu 11.10 run smoothly with full hardware compatibility on vaio S series laptop? is there ubuntu support for vaio or vaio support for Ubuntu? googling on net found that there are some problems running Ubuntu on vaio is that true? if so will I get support from any community?

    Read the article

  • Does one's native spoken language affect quality of code?

    - by Xepoch
    There is a school of thought in linguistics that problem solving is very much tied to the syntax, semantics, grammar, and flexibility of one's own native spoken language. Working with various international development teams, I can clearly see a mental culture (if you will) in the codebase. Programming language aside, the German coding is quite different from my colleagues in India. As well, code is distinctly different in Middle America as it is in Coastal America (actually, IBM noticed this years ago). Do you notice with your international colleagues (from ANY country) that coding style and problem solving are in-line with native tongues?

    Read the article

  • Are there non-programming related activities akin to solving programming problems ?

    - by julien
    I'm talking about particular activities, for which you can draw parallels with the specific kind of reasonning needed when solving programming problems. Counter examples are activities that would help in almost any situation, like : take a shower or any other, somewhat passive activities, which are only helpful in triggering this sort of asynchronous problem solving our brain does exercise, because you brain simply works better when you're fit EDIT : It seems this question was quite misunderstood. I wasn't asking about what you can do when stuck on a problem but rather, what kind of activities you have in you spare time that you think help you, more or less directly, solving programing problems.

    Read the article

  • Analog and digital audio output at the same time

    - by wim
    My speakers use a digital input, but my headphones use an analog input. I have them both plugged in, and when I want to use the headphones I just turn off the speakers and switch on the headphones. I know that simultaneous output on digital and analog is supported by the hardware, because it worked fine in Windows XP. But on Ubuntu, I seem to only get one at a time, depending on which setting is selected in the combo box located at System -> Preferences -> Sound -> Hardware. How can I get simultaneous analog and digital output without having to switch the profile every time? I'm on Ubuntu 11.04 and it's an HDA Intel chip.

    Read the article

  • My wireless/WiFi connection does not work. What can I do?

    - by Wild Man
    Your situation You have successfully installed Ubuntu. You have just downloaded and booted Ubuntu live media. The latest LTS (see also HWE) or latest non-LTS release are preferred. See the list of Ubuntu releases that are currently supported.) You upgraded your Ubuntu installation to the latest release that the software updater offered you. WiFi worked before, but not now on the new release. You migrated your existing Ubuntu installation to new hardware. Your problem The wireless of your laptop or dekstop is not working. You tried switching the wireless switch off and on and you tried rebooting several times, but you don't see any WiFi access points. You can see your wireless access point, but you cannot establish a connection. You want to analyze the problem, but you don't know where to start or what information you can provide. Related questions I have a hardware detection problem, what logs do I need to look into?

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >