Search Results

Search found 1904 results on 77 pages for 'james cadd'.

Page 22/77 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• How to tell if PAE is hurting me?

  - by James

  I have a couple of servers with 20-30 GB RAM that are running (a variant of) RHEL4. They are currently running the SMP i386 kernel, not x64, not even the hugemem kernel. This means LowMem is confined to < 1G, and thus dentry_cache and ext3_inode_cache to 100M or so each. How can I tell if this is a problem? Here's a typical vmstat report while it's compiling some Java: $ vmstat 10 procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 19493816 394740 922420 0 0 1058 2292 1491 1020 6 3 80 12 2 1 0 19519480 395244 850156 0 0 1179 1412 1329 1195 9 4 75 12 1 1 0 19557368 392616 828344 0 0 1783 1680 1498 1756 14 5 72 9 I don't like the way bi is nonzero when there is so much memory free. I imagine slabtop could point more directly to the problem but I don't really understand how to interpret its output.

  Read the article

• Do you need to advertise an AFP service via Avahi for an Ubuntu Server to show up in OSX Finder?

  - by James

  I am only advertising an NFS share plus the "model", and I don't want to install extra services on the Server unless I have to, ie netatalk, as it is used solely for NFS exports. Currently there is no entry in Finder under "Shared" with below config of Avahi. serveradmin@FILESERVER:/etc/avahi/services$ cat nfs.service <?xml version="1.0" standalone='no'?><!--*-nxml-*--> <!DOCTYPE service-group SYSTEM "avahi-service.dtd"> <service-group> <name replace-wildcards="yes">%h</name> <service> <type>_nfs._tcp</type> <port>2049</port> <txt-record>path=/Volumes/StoragePool</txt-record> </service> <service> <type>_device-info._tcp</type> <port>0</port> <txt-record>model=Xserve</txt-record> </service> </service-group> Server: Ubuntu 12.04.01 x64 Clients: OSX 10.6.8 , 10.7.5, 10.8.2 The goal is to advertise that NFS share, then assign a really old Model code of Mac like a Powermac and switch out the icon for a more "LinuxServer-y" one. Plus allow users to connect to NFS in a manner they are familiar with like our other Xserve servers. I think Avahi is working in general as if I do: nfs://FILESERVER.local/Volumes/StoragePool it will connect fine. Any ideas?

  Read the article

• Failover Issuer CAs without Clustering

  - by James Santiago

  I am attempting to setup a Certificate Authority with some failover capabilities for the issuer CAs. I have an offline root CA and am attempting to setup two subordinate CAs on our domain which will handle issuing certificates. I'm trying to determine the architecture needed for these two CAs to allow one to go down and the other to take over without the use of failover clustering, as the two are in different geographic locales. Are there documents regarding this setup?

  Read the article

• Access violations on Windows 2008 VPS

  - by James Hay

  I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

  Read the article

• Scripting a database copy from MS Sql 2005 to 2008 without detach/backup/RDP

  - by James Santiago

  My goal is to move a single SQL 2005 database to a seperate 2008 server. The issue is my level of access to both servers. On each I can only access the database and nothing else. I cant create a backup file or detach the database because I don't have access to the file system or to create a proxy. I've tried using the generate script function of sql 2005 management studio express to restore the schema but receive command not supported errors when attempting to execute the sql on the new database. Similarly I tried using EMS SQL Manager 2005 Lite to script a backup of the schema and data but ran into similar problems. How do I go about acomplishing this? I can't seem to find any solutions outside of using the detach and backup functions.

  Read the article

• How to rewrite these URLs?

  - by Evik James

  I am brand new to URL rewriting. I am using an Apache rewriting module on IIS 7.5 (I think). Either way, I am able to do rewrites successfully, but am having trouble on a few key things. I want this pretty url to rewrite to the this ugly url: mydomain.com/bike/1234 (pretty) mydomain.com/index.cfm?Section=Bike&BikeID=1234 (ugly) This works great with this rule: RewriteRule ^bike/([0-9]+)$ /index.cfm?Section=Bike&BikeID$1 Issue #1 I want to be able to add a description and have it go to exactly the same place, so that the useful info is completely ignored by my application. mydomain.com/bike/1234/a-really-great-bike (pretty and useful) mydomain.com/index.cfm?Section=Bike&BikeID=1234 Issue #2 I need to be able to add a second or third parameter and value to the url to get extra info for the db, like this: mydomain.com/bike/1234/5678 mydomain.com/index.cfm?Section=Bike&BikeID=1234&FeatureID=5678 This works using this rule: RewriteRule ^bike/([0-9]+)/([0-9]+)$ /index.cfm?Section=Bike&BikeID=$1&FeatureID=$2 Again, I need to add some extra info, like in the first example: mydomain.com/bike/1234/5678/a-really-great-bike (pretty and useful) mydomain.com/index.cfm?Section=Bike&BikeID=1234&FeatureID=5678 So, how can I combine these rules so that I can have one or two or three parameters and any of the "useful words" are completely ignored?

  Read the article

• Apache Proxy Pass and Web Sockets

  - by James

  I'm using Apache with the mod_proxy module to reverse proxy my Node.js application through to port 80, so that we can access it as an internal application. I have a file in sites-enabled which contains this: VirtualHost *:80> DocumentRoot /var/www/internal/ ServerName internal ServerAlias internal <Directory /var/www/internal/public/> Options All AllowOverride All Order allow,deny Allow from all </Directory> ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ retry=0 ProxyPassReverse / http://localhost:8080/ ProxyPreserveHost on ProxyTimeout 1200 LogLevel debug AllowEncodedSlashes on </VirtualHost> As I said, our application is written in Node.js and we're using socket.io to make use of web-sockets, as our application also contains realtime elements to it. The problem is, mod_proxy doesn't seem to handle web sockets and we get errors when trying to use them: WebSocket connection to 'ws://bloot/socket.io/1/websocket/nHtTh6ZwQjSXlmI7UMua' failed: Unexpected response code: 502 How can we fix this issue and keep sockets working, as the only way we can get it working currently is to access the site via ip:port which we don't want to do. Also, as a side question, how can I get ErrorDocument to work properly? Our error files are stored in /var/www/internal/public/error/ but they seem to get put through the proxy too?

  Read the article

• What are some good, free tools to run automated security audits for PHP code?

  - by James Simpson

  I've been looking for some time now and have come up short. The most promising I found was Spike PHP, which seems to no longer work. I'm looking to scan my code for potential risks of SQL Injection, XSS, etc. I've gone through most of my code manually, but with a few hundred thousand lines of code, I'm sure I missed things. If possible, are there any tools that can be downloaded and analyze code on my local machine rather than installing to the live server (this isn't a requirement if not)?

  Read the article

• I just restarted Apache and now the server is down

  - by James

  I am pretty terrified right now. I'm scared I'm going to get a call in a couple minutes from a hundred people saying the website doesn't work. I was at the terminal changing some configuration files when I went to restart the server to update the .conf files with this command: /etc/init.d/apache2 graceful After I ran that, none of the websites work and I have no idea what to do. There are about 100 errors I am getting according to the log files. They all begin with "PHP Notice" and most relate to "use of undefined constant" Also, I just spoke with a coworker, describing what I did, and he noticed that there are two installations of apache on the server and that I restarted the one that we don't use. This is what the error log says (assuming it's the correct error log): [Wed Jan 05 11:52:06 2011] [notice] Graceful restart requested, doing restart Warning: DocumentRoot [/u/apps/staging/antetr/current/public/] does not exist [Wed Jan 05 11:52:08 2011] [warn] NameVirtualHost *:80 has no VirtualHosts (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs FINAL UPDATE: Ok, I fixed it. The problem was (as you experts facepalming probably know) that it couldn't access an error log in the directory I was working in. I created an empty error log file and tried the restart command again and now all the sites are back up... Though my original problem is still there.. Thanks to all those who offered advice, it really helped and let me breathe for a moment.

  Read the article

• polaroid job pro 2

  - by james

  how do i switch my camera battery and the battery type

  Read the article

• Word 2007 - Change default text control text

  - by James

  When inserting a text box using the developer tab in Word 2007, by default the inserted text box says "Click here to enter text". How can I change this to something different? Thanks.

  Read the article

• I just restarted Apache and now the server is down

  - by James

  I am pretty terrified right now. I'm scared I'm going to get a call in a couple minutes from a hundred people saying the website doesn't work. I was at the terminal changing some configuration files when I went to restart the server to update the .conf files with this command: /etc/init.d/apache2 graceful After I ran that, none of the websites work and I have no idea what to do. There are about 100 errors I am getting according to the log files. They all begin with "PHP Notice" and most relate to "use of undefined constant" Also, I just spoke with a coworker, describing what I did, and he noticed that there are two installations of apache on the server and that I restarted the one that we don't use. This is what the error log says (assuming it's the correct error log): [Wed Jan 05 11:52:06 2011] [notice] Graceful restart requested, doing restart Warning: DocumentRoot [/u/apps/staging/antetr/current/public/] does not exist [Wed Jan 05 11:52:08 2011] [warn] NameVirtualHost *:80 has no VirtualHosts (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs FINAL UPDATE: Ok, I fixed it. The problem was (as you experts facepalming probably know) that it couldn't access an error log in the directory I was working in. I created an empty error log file and tried the restart command again and now all the sites are back up... Though my original problem is still there.. Thanks to all those who offered advice, it really helped and let me breathe for a moment.

  Read the article

• RAID 50 24Port Fast Writes Slow Reads - Ubuntu

  - by James

  What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

  Read the article

• Windows Upgrade vs Full Install

  - by James Atkinson

  I'm in the process of purchasing a Netbook for use while traveling. The included OS is XP, however, I would like to upgrade(?) to Windows 7. My question: Does a Windows Upgrade have the same physical footprint and performance as a full install? Does an upgrade leave behind non used files/resources that were originally included in XP? If so, are there ways to reduce this? I'm trying to reduce as much OS bloat as possible. Please let me know if my question is unclear. Thanks. Related to http://superuser.com/questions/60646/is-a-clean-install-really-better-than-an-upgrade however, this doesn't address the "leftovers" question.

  Read the article

• Simple SSH public/private key question

  - by James R.

  I am trying to learn this instead of just following guides so I can recommend proper actions when people do ask (and they do). Here is what I got down. First, generate both key with command such as this: ssh-keygen -b 2048 -t rsa -C comment -f ~/.ssh/id_rsa Then you push the public part of the key into authorized_keys2 file cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys2 (and then chmod it to 600 or similar) And you download the private key to your computer (id_rsa) and feed that in to Putty to be read and authenticate. Are these the correct steps to setting this public/private key authentication for passwordless login to SSH?

  Read the article

• Are animated GIFs supported in Google Chrome?

  - by James Goodwin

  I have recently been testing a website and found animated gif images that seem to show fine in IE and Firefox but in Google Chrome they only show briefly and then dissapear! This happens if I view the image on the page or view the file directly. Are there any reported problems in displaying GIFs in Chrome, or is it just being fussy? There seemed to have been some problems in older versions of Chrome, but it's hard to believe something as simple as this wouldn't have been fixed by now. The version of Google Chrome I am using is: 4.1.249.1021 Not sure if this is relevant, but some info about the image: Width: 216 pixels Height: 36 pixels Horizontal resolution: 96dpi Vertical resolution: 96dpi Bit Depth: 32 Frame Count: 3 EDIT: Seems to be a problem relating to the latest beta version of Chrome, as it works fine in 4.0.249

  Read the article

• Install .NET 3.5 SP1 on Windows 7 RC

  - by James Alexander

  While attempting to install .NET 3.5 SP1 on a fresh install of Windows 7 RC, nothing happens. The machine gives a UAC prompt. When selecting Yes, nothing happens. Using the full redistributable package gives the same result: nothing. Is there a reason why the .NET 3.5 SP1 installer would suddenly quit and not proceed with installation?

  Read the article

• Cannot upgrade to Lion using DVD

  - by James

  When I first setup my MBP on 10.6 I made a lot of newb mistakes, and was unable to get Ruby on Rails to install, amongst a lot of other things. Because of this, I decided to backup everything on to a Time Machine HDD and re-install Lion. I had a bunch of problems but managed to sort them out, requiring me to go back to 10.6 from the original disc that came with the MBP. Before I did anything however, I burnt the Lion installer that I got from the App Store to a DVD. Now though, when I try to run it, I get the following: Cannot download additional components. I've managed to download software updates, so I know it can connect to the Apple servers.

  Read the article

• Running complete Native Linux on phones that are bootloader-unlocked [on hold]

  - by james

  Since there are many phones (HTC, Samsung, LG, Nexus) today that have bootloader unlocked, I want to ask what's preventing them from running a complete native GNU/Linux. GNU/Linux has ARM port and we can run a command line GNU/Linux on top of Android by the method of chroot. So, what's preventing for existing bootloader unlocked Android phones from running a complete GNU/Linux natively? The device should get a long shelf life if it has one such port. My few thoughts.. Proprietary drivers for hardware that cannot be made to work when using a different OS. And the binary provider will never support any OS other than what the phone is shipped with. Application Interface. The interface for desktop apps doesn't fit to the mobile display with different PPI. Kernel. Since android devices use Linux kernel whose sources should be available, could the device kernel be modified to work with GNU/Linux. And any other reasons?

  Read the article

• Problem with Quotas and File Screening on Mount Points in Windows 2008

  - by James P

  Hello, I have a Windows 2008 Server running the File Server Role and I would like to use mount points for my volumes instead of drive letters. However, I need to use the quota and file screening features of File Server Resource Manager, and it seems that they do not apply correctly to mount point folders. I am able to upload oversized files and excluded file types without any warnings. Could someone help me with a fix or workaround for this issue? Thanks, Jamie

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Voices disappear when using headphones.

  - by James

  How do I declare a variable in C? P.S. I have a pair of SteelSeries Siberia headphones. I've noticed that when watching some films the voices are completely silent, yet when I unplug the headset and listen through my speakers they are there and sound normal. I have no other software that could be interfering with it and it happens regardless of the software I use for playback (I've tried VLC, WMP and Quicktime). It is so strange, and it almost sounds deliberate - the rest of the audio is untouched but voices disappear. The films only have single audio tracks, and it doesn't happen with every film. Can anyone give me any hints as to what could possibly cause this? I am stumped!

  Read the article

• how to stop outgoing email spam

  - by James

  running an email system using roundcube, with about 200 people using it. 99% of them do as they are told and only email clients they have already spoken to, however 1% of them decide to bulk spam bcc emails, which then tripped an aol filter and almost got us banned from our host. I have disabled the guys account but I am worried about something similar happening in the future, what would be the best way to stop this? I read that if aol recieve 3 emails within 60 seconds from the same ip address then its an instant ban, so i am guessing with the big companies like google, their email accounts must have different ip addresses? and if so is there any way to implement a similar feature? Also i have spam assasin enabled, in this case what would be the best configuration for it?

  Read the article

• Screen -X exec commands not working until manually attached

  - by James Watt

  I have a batch script that starts a java server application inside of a screen. The command looks like this: cd /dir/ && screen -A -m -d -S javascreen java -Xms640M -Xmx1024M -jar javaserverapp.jar nogui After I run the batch script, it starts the server and puts it inside the correct screen. If I list my screens after, I see something like this: user@gtwy /dir $ screen -list There is a screen on: 16180.javascreen (Detached) 1 Socket in /var/run/screen/S-user. However, I have a second batch script that sends automated commands to this server and runs on a different crontab interval. Because of the way the application works, I send commands to it like this (this command tells it to alert connected users "testing 123"): screen -X exec .\!\! echo say testing 123 I've also tried: screen -R -X exec .\!\! echo say testing 123 screen -S javascreen -X exec .\!\! echo say testing 123 Unfortunately, these commands DO NOT WORK. They don't even give me an error message, they just do nothing. HOWEVER - If I manually attach to the screen first (with the below command) and then detach, now I can run any of the above commands flawlessly. I can demonstrate this with a video, if I wasn't clear enough here. screen -r -d Thanks in advance. Update: here is the important parts of /etc/screenrc. It should be totally vanilla, I've never edited this file. # VARIABLES # =============================================================== # No annoying audible bell, using "visual bell" # vbell on # default: off # vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!" # Automatically detach on hangup. autodetach on # default: on # Don't display the copyright page startup_message off # default: on # Uses nethack-style messages # nethack on # default: off # Affects the copying of text regions crlf off # default: off # Enable/disable multiuser mode. Standard screen operation is singleuser. # In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used # to enable (and disable) other user accessing this screen session. # Requires suid-root. multiuser off # Change default scrollback value for new windows defscrollback 1000 # default: 100 # Define the time that all windows monitored for silence should # wait before displaying a message. Default 30 seconds. silencewait 15 # default: 30 # bufferfile: The file to use for commands # "readbuf" ('<') and "writebuf" ('>'): bufferfile $HOME/.screen_exchange # # hardcopydir: The directory which contains all hardcopies. # hardcopydir ~/.hardcopy # hardcopydir ~/.screen # # shell: Default process started in screen's windows. # Makes it possible to use a different shell inside screen # than is set as the default login shell. # If begins with a '-' character, the shell will be started as a login shell. # shell zsh # shell bash # shell ksh shell -$SHELL # shellaka '> |tcsh' # shelltitle '$ |bash' # emulate .logout message pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended." # caption always " %w --- %c:%s" # caption always "%3n %t%? @%u%?%? [%h]%?%=%c" # advertise hardstatus support to $TERMCAP # termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\' # set every new windows hardstatus line to somenthing descriptive # defhstatus "screen: ^En (^Et)" # don't kill window after the process died # zombie "^["

  Read the article

• After reinstallation, Disk Cleanup disappears when I click OK.

  - by James

  After I reinstalled Windows 7, Disk Cleanup stopped working. I can start Disk Cleanup and select the drive to clean, but when I click on the OK button, the window disappears. Any solutions? Here's the data from Windows LogsApplication :- EventData 1744235005 1 APPCRASH Not available 0 cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 F:\Users\Jacob\AppData\Local\Temp\WER419.tmp.WERInternalMetadata.xml F:\Users\Jacob\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_cleanmgr.exe_6514b6ecb633f97cbf78e3a5bcae2c4bd74351_0d3b109c 0 75fa9599-41b1-11e0-b864-001966b2bcb6 0 The above one was with an Information icon. The one below was with an Error icon:-- EventData cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 bbc 01cbd5be36b572bf F:\Windows\system32\cleanmgr.exe F:\Program Files\Common Files\Microsoft Shared\OFFICE14\Csi.dll 75fa9599-41b1-11e0-b864-001966b2bcb6 I also used process explorer:- When i started disk cleanup, a cleanmgr.exe process appeared under explorer.exe.But when i clicked on the "OK" button after selecting the drive, cleanmgr.exe was there for some seconds before it disappeared. But a new process - WerFault.exe appeared under svchost.exe a few seconds after i clicked the "OK" button. It disappeared, too, from the process list after some time (i think it disappeared along with cleanmgr.exe).

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >