Search Results

Search found 1354 results on 55 pages for 'martin owens doctormo'.

Page 22/55 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• How to set up a PC which can be booted from Linux AND Windows?

  - by Martin

  Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

  Read the article

• How do I extract files from one tarball to another tarball in one step?

  - by Martin

  I have some fairly large tarball archives, from which I need to extract some files. I will later repack those files to transfer them to another server. Currently that is a two (multi) step process for me: mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> <folder-to-be-extracted> or alternatively with wildcards mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> \ --wildcards --no-anchored '*pattern*' Then I go ahead and recompress the created folder tar -vczf small.tgz ttmp/* rm -rf ttmp How can I combine these two commands into one? Like this tar -x large.tgz > tar -c small.tgz Just to show, what I already tried: Whenever I search the terms "extract" I will end up here or here or even here. When I use the term "split" I will end up here and that is definitely not what I intend to do. When I use "repack" I end up in strange places.

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• Use autocomplete in dropdown cells with Excel 2007?

  - by Martin

  I want to make a survey with Excel and I therefore have defined the cells for the answers as a dropdown cell which only accepts answers from a certain list, e. g.: The two Lists List1 and List2 (yellow cells) are the possible answers for the questions in Block 1.x resp. 2.x (blue) . There might be a block 4 with more questions, which again use List1 for their possible answers. My problem is: I'd like to be able to use the autocompleate feature to fill in the blue cells with the dropdown menu, so that the user only types 5 and it automatically expands to "5: extremely important" or "5: extremely difficult". According to my research on the www, this should be possible if I add the list with possible answers directly above the cells where autocomplete should work (I did this with the green helper cells which could be hidden) . But I have to enter at least 4 characters 5: e to get the autocompleted suggestion. Is there a way to make autocomplete already replace a "5" by the corresponding valid term? As the survey file shall be distributed to a lot of people "outside", I can not use VBA magic because it may be blocked on their computer and might not work. EDIT: it seems to have to do with the numbers I use: If I'd start my List items with A, B, C instead of 1, 2, 3, it would work perfectly. Excel seems to ignore the pure numbers when they are entered and does not try to autocomplete them.. is there a workaround? (I hope it is clear what I want, it seems a little difficult to explain.)

  Read the article

• Nginx: Disallow index.html in URL

  - by Martin Vilcans

  We're generating a site consisting of only static files (using Assemble). Having the .html extension on URLs looks so nineties, so we generate every static HTML file in its own directory and call it index.html. For example, the url http://www.example.com/foo/bar/ is in the file /var/www/foo/bar/index.html. This works well, but there is one small thing nagging me: Now there are two possible URLs to the same resource: http://www.example.com/foo/bar/ (slash URL) http://www.example.com/foo/bar/index.html (index.html URL) By accident someone may link to the index.html form of the URL, which is bad for SEO and looks ugly (remember the nineties?). Is it possible in Nginx to give a 404 error on the index.html URL, but serve the slash URL? I tried this: location ~ /index\.html$ { return 404; } But it seems that Nginx does some internal rewrite of the slash URL to the index.html URL, and then matches this location so we get a 404 even on the slash URL. Note that to catch mistakes, we want index.html URLs to be an error, not just redirect to the slash URL.

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  I tried installing MediaPortal on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3 512MB DDR 80GB IDE K-World PVR-TV7131 Analog TV-Tuner Inno3d FX5500 128MB 64bit When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Wrong chrome full screen resolution with multiple displays

  - by Martin

  I am using Google Chrome on Windows 7 64bit with two displays. The displays have different resolutions and aspect-ratios. My problem is best visible when playing back full-screen videos from a flash player inside chrome (but it is not flash related). The maximum size is calculated from the primary displays' resolution, even when the relevant window is maximised on the second screen. The problem is also visible on websites that set the width to 100%. The 100% then apply to the primary display, even when the window is opened on the secondary display. Are there any known solutions to this problem? I am observing it since many Chrome versions, do not know if it has been ever correct.

  Read the article

• Changing the Start Menu Power Button - Setting does not work: only (Shut down) is available

  - by Martin

  This is the second time I try to change this setting on a Vista based OS and I can't get it to work again. OS: Windows Server 2002 SP2 (not R2) = Microsoft Windows [Version 6.0.6002] = Vista When I go to: Power Options - Change Plan Settings - Change advanced power settings - Power buttons and lid - Start menu power button - Setting: the available combo box will only show the option Shut down. No other options are available. This server is part of a domain and has not been set up by me. I have not yet talked with the domain admin, but as far as I could tell from googling, only Win7 has group policy options for the start menu. (And yes, OC I will talk to the domain admin to see if he has any clue - which I doubt.) (Edit: I have now talked to our domain admin, and he's got no clue either.) I'm responsible for this server and a local administrator but not a domain administrator. I switched off User Account Control (UAC) yesterday without problems. Since I always log into this machine via RDP and this being a server, the natural choice would be the option (Log out) and not (Shut down). What can I do to fix it or to find out why it cannot be changed? Thanks!

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• iptables - drop all HTTP(S) traffic but from CloudFlare

  - by Martin

  I would like to allow only HTTP(S) traffic coming from CloudFlare. In that way attackers cannot attack the server directly. I know CloudFlare is not mainly a DDoS mitigator, but I would like to try it either way. I'm currently only having access to iptables (ipv4 only), but will try to install ip6tables soon. I just need to have this fixed soon. (we're getting (D)DoSed atm.) I was thinking about something like this: iptables -I INPUT -s <CloudFlare IP> --dport 80 -j ACCEPT iptables -I INPUT -s <CloudFlare IP> --dport 443 -j ACCEPT iptables -I INPUT -p tcp --dport 80 -j DROP iptables -I INPUT -p tcp --dport 443 -j DROP I know that CloudFlare has multiple IPs, but just for an example. Would this be the right way?

  Read the article

• Excel or Access: how to group several lines in a table and insert contents in columns? ("split column")

  - by Martin

  I have a table containing data of sold products (shown in the example on the left): Columns: Number of the order Product Name Attribute - specifies what is given in the following field "value", e. g. Customer Name or Product Variant Value - is the value of the Attribute Count - is the number of products of this variant sold in the order That means: Product B has 2 variants "c" and "d" Note that in Order 1 Product B was sold in Variant d only, because the letter "N" in field "D4" means "none". Note, that in OrdnerNo 3 Product B was sold only in Variant c, because for Variant d field "D9" is "N"!! This is confusing, but it is the structure of the original data (which I can not change). I need a way to convert the table on the left in a table like that on the right: one line for each product type Order Number Product Name Customer Name Count (number of products sold in this order) Variant - this is the problem, as it has to be filled with the So all rows with the same OrderNo and same product have to be grouped in to one, and I hope it is clear what I need. I tried to do it with Pivot Tables, but that fails, as the Count is always in each line, no matter if it has Value "N" or not and for the products without variants there is only one line for each order, however for products with variants there are several... So how could I create the right table with a VBA macro in MS Excel or maybe there is a trick in MS Access to do it directly or with an SQL query?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• Does Windows notice when a VM is moved around?

  - by Martin

  I'm thinking of migrating a Desktop machine (Windows XP) to a VM solution (VirtualBox or MS Virtual PC). The reason is that I need a new hardware anyways and I don't want to (cannot properly) reinstall all the "business" apps on there. So my plan goes as follows: I'll pull an image of the machine and restore it to a Virtual Machine using Acronis Universal Restore or some other tool that can restore to dissimilar hardware. (The process is largely irrelevant for this question I think.) Once I have this virtual machine properly running I'll move it to a new PC. So the question now is. Are there any caveats wrt. to Windows (XP?) being installed in a VM and the VM machine being moved around on different host computers? Can anything break in the OS inside the VM? Will there be troubles wrt. to Windows activation?

  Read the article

• How to access XAMPP virtual hosts from iPad on local network?

  - by martin's

  Using XAMPP on one machine. Multiple virtual hosts defined. One per project. Format is .local For example: apple.local microsoft.local client-site.local our-own-internal-site.local All works perfectly from that one machine. I now want to have other systems within the network access the various sites. The main reason for wanting to do this is to be able to test site functionality and layout from mobile devices without having to upload partial work to public servers. I can access the main XAMPP default site by simply entering the IP address of the XAMPP machine in, say, Safari on an iPad. However, there is no way to reach .local that I can see. Would this entail setting up a DNS server within the network? We have a mixture of Windows and Mac machines. No Linux. The XAMPP machine is Vista 64. I don't want real external internet access to be affected in any way, just ".local" pointed to the XAMPP machine if that makes sense.

  Read the article

• virtual web folder served by PHP script

  - by Martin

  I am trying to configure my apache to be able to display (virtual) pages like: mywebpage.com/something1 mywebpage.com/something2 mywebpage.com/folder/something3 I would like these "somethingX" and "folder" folders to be only virtual, not physical directories. For a start it would be great to send all requests to mywebpage to one PHP script which will somehow receive the original path information (there is some SERVER array as far as I know) and call necessary PHP functions (so far I use addresses like mywebpage.com/index.php?page=blabla&otherparameters=values...). Is that possible? I am struggling with different combination, currently I am with following file in /etc/apache2/conf.d/something.conf (not working of course). What is the correct way to proceed? Thanks. <Location /myweb> SetHandler my-handler Action my-handler /srv/www/htdocs/myweb/product.php virtual </Location> My pages are in /srv/www/htdocs/myweb. I tried with Location, with Directory, with Action and SetHandler, with AddHandler... ;-) Some configurations were ignored, some caused "object not found" with nothing relevant in error log.

  Read the article

• Looking for whole damaged laptops? Where I can find in good price?

  - by Martin

  Looking for whole damaged laptops? Where I can find in good price? Qty per month about 50-250 depends on price and configurations.

  Read the article

• Rate of UDP packet loss over WLAN

  - by Martin

  While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

  Read the article

• Url for search withing Exchange Server OWA

  - by Martin Vobr

  I can easily create url for searching the Internet for specific term: http://www.bing.com/search?q=example Is is possible to create a similar url for searching my Exchange server mailbox using Outlook Web App? Something like: http://my.exchange.server.tld/owa/search.aspx?q=example EDIT Some of comments asked for target, so here is the clarification: There is a web-based backoffice system which includes customer's email addresses. I want to provide an easy way to show emails related to this customer in a support mailbox. Adding a link to an OWA search result page seemed a way to accomplish quickly. I can lookup emails either via EWS or IMAP. I wanted to reuse OWA for displaying them instead of reinventing the wheel. If creating a search link is not possible what would be best alternative approach? I'm thinking about getting message list via EWS/IMAP, showing them and (at least now) redirecting to OWA in order to display the message content.

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• Connecting to a remote mysql server from a windows machine (XP)

  - by Samuel Martin

  I am trying to connect to mysql server which is installed on my home pc from another pc. I allowed all connection in mysql configuration. There's no firewall blocking on the pc I am trying to connect from. I used the command- mysql -h Some.Host.IP -u SomeUser -p SomePassword I am getting- ERROR 2003 (HY000): Can't connect to MySQL server on 'Some.Host.IP' (10060) I can connect through php!! What's the problem? How do I solve it?

  Read the article

• How to allow simple file sharing on Windows Server 2008R2 through VPN

  - by Martin Wiboe

  We are a small, distributed company with a Windows Server 2008R2 installation. I would like to set up a way for our employees to connect securely to this server via VPN and then be able to map a network drive. I have gotten this to work somewhat by installing the Network Policy and Access Services Role on the server and using the default settings. I have also created a network share on the server. The problem is that our connectivity is sporadic (sometimes the service stops listening on the port or simply refuses to authorize correct credentials) and slow. I can always connect through VPN, but mapping is problematic. I would be grateful for the answer on how to accomplish this as well as some guidance on whether I am on the right track. Thanks in advance!

  Read the article

• What was the name of the Mac application to analyze sleeping patterns?

  - by Martin Marconcini

  I remember that about two or three years ago, there was an application that ran on OS X (panther for sure) that you could install on a laptop next to your bed and it will analyze your sleeping patterns, noise, movement, etc. All through the cam/mic. Does anybody remember the name of that application? I couldn’t find any reference to it. It simply vanished. Thanks.

  Read the article

• How to allow Mac OS X's native Apache/PHP installation to access WebServer directories?

  - by Martin Bean

  I have a problem bugging me with Mac OS X's native Apache/PHP installation. With my PHP scripts, I have to alter the file permissions on each folder I want to access. For example, in an upload script I would have to set the destination directory to 'read & write' for the group 'everyone'. However, I believe this is not the best practice and would like all of my directories to be readily writable to PHP. My scripts are stored in /Library/WebServer/Documents/, which is Mac OS X's default directory to serve web pages locally.

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >