Search Results

Search found 550 results on 22 pages for 'passwd'.

Page 22/22 | < Previous Page | 18 19 20 21 22 

  • New Big Data Appliance Security Features

    - by mgubar
    The Oracle Big Data Appliance (BDA) is an engineered system for big data processing.  It greatly simplifies the deployment of an optimized Hadoop Cluster – whether that cluster is used for batch or real-time processing.  The vast majority of BDA customers are integrating the appliance with their Oracle Databases and they have certain expectations – especially around security.  Oracle Database customers have benefited from a rich set of security features:  encryption, redaction, data masking, database firewall, label based access control – and much, much more.  They want similar capabilities with their Hadoop cluster.    Unfortunately, Hadoop wasn’t developed with security in mind.  By default, a Hadoop cluster is insecure – the antithesis of an Oracle Database.  Some critical security features have been implemented – but even those capabilities are arduous to setup and configure.  Oracle believes that a key element of an optimized appliance is that its data should be secure.  Therefore, by default the BDA delivers the “AAA of security”: authentication, authorization and auditing. Security Starts at Authentication A successful security strategy is predicated on strong authentication – for both users and software services.  Consider the default configuration for a newly installed Oracle Database; it’s been a long time since you had a legitimate chance at accessing the database using the credentials “system/manager” or “scott/tiger”.  The default Oracle Database policy is to lock accounts thereby restricting access; administrators must consciously grant access to users. Default Authentication in Hadoop By default, a Hadoop cluster fails the authentication test. For example, it is easy for a malicious user to masquerade as any other user on the system.  Consider the following scenario that illustrates how a user can access any data on a Hadoop cluster by masquerading as a more privileged user.  In our scenario, the Hadoop cluster contains sensitive salary information in the file /user/hrdata/salaries.txt.  When logged in as the hr user, you can see the following files.  Notice, we’re using the Hadoop command line utilities for accessing the data: $ hadoop fs -ls /user/hrdataFound 1 items-rw-r--r--   1 oracle supergroup         70 2013-10-31 10:38 /user/hrdata/salaries.txt$ hadoop fs -cat /user/hrdata/salaries.txtTom Brady,11000000Tom Hanks,5000000Bob Smith,250000Oprah,300000000 User DrEvil has access to the cluster – and can see that there is an interesting folder called “hrdata”.  $ hadoop fs -ls /user Found 1 items drwx------   - hr supergroup          0 2013-10-31 10:38 /user/hrdata However, DrEvil cannot view the contents of the folder due to lack of access privileges: $ hadoop fs -ls /user/hrdata ls: Permission denied: user=drevil, access=READ_EXECUTE, inode="/user/hrdata":oracle:supergroup:drwx------ Accessing this data will not be a problem for DrEvil. He knows that the hr user owns the data by looking at the folder’s ACLs. To overcome this challenge, he will simply masquerade as the hr user. On his local machine, he adds the hr user, assigns that user a password, and then accesses the data on the Hadoop cluster: $ sudo useradd hr $ sudo passwd $ su hr $ hadoop fs -cat /user/hrdata/salaries.txt Tom Brady,11000000 Tom Hanks,5000000 Bob Smith,250000 Oprah,300000000 Hadoop has not authenticated the user; it trusts that the identity that has been presented is indeed the hr user. Therefore, sensitive data has been easily compromised. Clearly, the default security policy is inappropriate and dangerous to many organizations storing critical data in HDFS. Big Data Appliance Provides Secure Authentication The BDA provides secure authentication to the Hadoop cluster by default – preventing the type of masquerading described above. It accomplishes this thru Kerberos integration. Figure 1: Kerberos Integration The Key Distribution Center (KDC) is a server that has two components: an authentication server and a ticket granting service. The authentication server validates the identity of the user and service. Once authenticated, a client must request a ticket from the ticket granting service – allowing it to access the BDA’s NameNode, JobTracker, etc. At installation, you simply point the BDA to an external KDC or automatically install a highly available KDC on the BDA itself. Kerberos will then provide strong authentication for not just the end user – but also for important Hadoop services running on the appliance. You can now guarantee that users are who they claim to be – and rogue services (like fake data nodes) are not added to the system. It is common for organizations to want to leverage existing LDAP servers for common user and group management. Kerberos integrates with LDAP servers – allowing the principals and encryption keys to be stored in the common repository. This simplifies the deployment and administration of the secure environment. Authorize Access to Sensitive Data Kerberos-based authentication ensures secure access to the system and the establishment of a trusted identity – a prerequisite for any authorization scheme. Once this identity is established, you need to authorize access to the data. HDFS will authorize access to files using ACLs with the authorization specification applied using classic Linux-style commands like chmod and chown (e.g. hadoop fs -chown oracle:oracle /user/hrdata changes the ownership of the /user/hrdata folder to oracle). Authorization is applied at the user or group level – utilizing group membership found in the Linux environment (i.e. /etc/group) or in the LDAP server. For SQL-based data stores – like Hive and Impala – finer grained access control is required. Access to databases, tables, columns, etc. must be controlled. And, you want to leverage roles to facilitate administration. Apache Sentry is a new project that delivers fine grained access control; both Cloudera and Oracle are the project’s founding members. Sentry satisfies the following three authorization requirements: Secure Authorization:  the ability to control access to data and/or privileges on data for authenticated users. Fine-Grained Authorization:  the ability to give users access to a subset of the data (e.g. column) in a database Role-Based Authorization:  the ability to create/apply template-based privileges based on functional roles. With Sentry, “all”, “select” or “insert” privileges are granted to an object. The descendants of that object automatically inherit that privilege. A collection of privileges across many objects may be aggregated into a role – and users/groups are then assigned that role. This leads to simplified administration of security across the system. Figure 2: Object Hierarchy – granting a privilege on the database object will be inherited by its tables and views. Sentry is currently used by both Hive and Impala – but it is a framework that other data sources can leverage when offering fine-grained authorization. For example, one can expect Sentry to deliver authorization capabilities to Cloudera Search in the near future. Audit Hadoop Cluster Activity Auditing is a critical component to a secure system and is oftentimes required for SOX, PCI and other regulations. The BDA integrates with Oracle Audit Vault and Database Firewall – tracking different types of activity taking place on the cluster: Figure 3: Monitored Hadoop services. At the lowest level, every operation that accesses data in HDFS is captured. The HDFS audit log identifies the user who accessed the file, the time that file was accessed, the type of access (read, write, delete, list, etc.) and whether or not that file access was successful. The other auditing features include: MapReduce:  correlate the MapReduce job that accessed the file Oozie:  describes who ran what as part of a workflow Hive:  captures changes were made to the Hive metadata The audit data is captured in the Audit Vault Server – which integrates audit activity from a variety of sources, adding databases (Oracle, DB2, SQL Server) and operating systems to activity from the BDA. Figure 4: Consolidated audit data across the enterprise.  Once the data is in the Audit Vault server, you can leverage a rich set of prebuilt and custom reports to monitor all the activity in the enterprise. In addition, alerts may be defined to trigger violations of audit policies. Conclusion Security cannot be considered an afterthought in big data deployments. Across most organizations, Hadoop is managing sensitive data that must be protected; it is not simply crunching publicly available information used for search applications. The BDA provides a strong security foundation – ensuring users are only allowed to view authorized data and that data access is audited in a consolidated framework.

    Read the article

  • How to make sure that grub does use menu.lst?

    - by Glen S. Dalton
    On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

    Read the article

  • Problem upgrading kernel on debian 3.1

    - by exhuma
    Hi, I have a quite old box in a remote server farm. So I have no direct access. Only remote SSH (and via SSH to a serial console). I haven't updated this box in ages. Now, whenever I want to install a new package, a dependency to glibc appears. Unfortunately, the install of glibc depends on a 2.6 kernel and I am running a venerable 2.4 kernel (one more reason to upgrade). The problem is, that the install of a new kernel has an indirect (over locales) dependency to glibc. So, to install glibc, I need a new kernel. For a new kernel, I need to upgrade glibc. Essentially I am blocked. What's the best way to proceed considering I have no "hardware" access? Here's a quick transcript of the upgrade process: [green:~]% sudo aptitude install linux-image-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages are unused and will be REMOVED: gcc-4.3-base The following NEW packages will be automatically installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 module-init-tools yaird The following packages have been kept back: adduser apache2 apache2-mpm-prefork apache2-utils apache2.2-common apt apt-utils aptitude autoconf autotools-dev awstats base-files base-passwd [...snip...] util-linux vacation vim vim-common wamerican wbritish wget whiptail whois wwwconfig-common zlib1g The following NEW packages will be installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 linux-image-686 module-init-tools yaird The following packages will be upgraded: hotplug libc6 2 packages upgraded, 8 newly installed, 1 to remove and 277 not upgraded. Need to get 0B/22.7MB of archives. After unpacking 52.1MB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Preconfiguring packages ... (Reading database ... 34065 files and directories currently installed.) Preparing to replace libc6 2.3.6.ds1-13 (using .../libc6_2.7-18lenny2_i386.deb) ... Checking for services that may need to be restarted... Checking init scripts... WARNING: init script for postgresql not found. [ --- libc6 config screen appears here --- ] WARNING: POSIX threads library NPTL requires kernel version 2.6.8 or later. If you use a kernel 2.4, please upgrade it before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: dpkg: dependency problems prevent configuration of locales: locales depends on glibc-2.7-1; however: Package glibc-2.7-1 is not installed. dpkg: error processing locales (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: locales Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done Now, if I follow the instrunctions as promted I get the following. Note that I am using aptitude instead of apt-get to benefit from the better dependency tracking. I did try with apt-get first. But that let me to the same problem. [green:~]% sudo aptitude install -t etch linux-image-2.6.26-2-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done E: Unable to correct problems, you have held broken packages. E: Unable to correct dependencies, some packages cannot be installed E: Unable to resolve some dependencies! Some packages had unmet dependencies. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies: linux-image-2.6.26-2-686: Depends: initramfs-tools (>= 0.55) but it is not installable or yaird (>= 0.0.13) but it is not installable or linux-initramfs-tool which is a virtual package. Any ideas?

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Set up linux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • Error data: line 2 column 1 when using pycurl with gzip stream

    - by Sagar Hatekar
    Thanks for reading. Background: I am trying to read a streaming API feed that returns data in JSON format, and then storing this data to a pymongo collection. The streaming API requires a "Accept-Encoding" : "Gzip" header. What's happening: Code fails on json.loads and outputs - Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) (Refer Error Log below) This does NOT happen while parsing every JSON object - it happens at random. My guess is I am encountering some weird JSON object after every "x" proper JSON objects. I did reference how to use pycurl if requested data is sometimes gzipped, sometimes not? and Encoding error while deserializing a json object from Google but so far have been unsuccessful at resolving this error. Could someone please help me out here? Error Log: Note: The raw dump of the JSON object below is basically using the repr() method. '{"id":"tag:search.twitter.com,2005:207958320747782146","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:493653150","link":"http://www.twitter.com/Deathnews_7_24","displayName":"Death News 7/24","postedTime":"2012-02-16T01:30:12.000Z","image":"http://a0.twimg.com/profile_images/1834408513/deathnewstwittersquare_normal.jpg","summary":"Crashes, Murders, Suicides, Accidents, Crime and Naturals Death News From All Around World","links":[{"href":"http://www.facebook.com/DeathNews724","rel":"me"}],"friendsCount":56,"followersCount":14,"listedCount":1,"statusesCount":1029,"twitterTimeZone":null,"utcOffset":null,"preferredUsername":"Deathnews_7_24","languages":["tr"]},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"web","link":"http://twitter.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","body":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958320747782146","summary":"Kathi Kamen Goldmark, Writers\xe2\x80\x99 Catalyst, Dies at 63 http://t.co/WBsNlNtA","link":"http://twitter.com/Deathnews_7_24/statuses/207958320747782146","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nytimes.com/2012/05/30/boo\xe2\x80\xa6","indices":[52,72],"expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html","url":"http://t.co/WBsNlNtA"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":11,"urls":[{"url":"http://t.co/WBsNlNtA","expanded_url":"http://www.nytimes.com/2012/05/30/books/kathi-kamen-goldmark-writers-catalyst-dies-at-63.html?_r=1"}]}}\r\n{"id":"tag:search.twitter.com,2005:207958321003638785","objectType":"activity","actor":{"objectType":"person","id":"id:twitter.com:178760897","link":"http://www.twitter.com/Mobanu","displayName":"Donald Ochs","postedTime":"2010-08-15T16:33:56.000Z","image":"http://a0.twimg.com/profile_images/1493224811/small_mobany_Logo_normal.jpg","summary":"","links":[{"href":"http://www.mobanuweightloss.com","rel":"me"}],"friendsCount":10272,"followersCount":9698,"listedCount":30,"statusesCount":725,"twitterTimeZone":"Mountain Time (US & Canada)","utcOffset":"-25200","preferredUsername":"Mobanu","languages":["en"],"location":{"objectType":"place","displayName":"Crested Butte, Colorado"}},"verb":"post","postedTime":"2012-05-30T22:15:02.000Z","generator":{"displayName":"twitterfeed","link":"http://twitterfeed.com"},"provider":{"objectType":"service","displayName":"Twitter","link":"http://www.twitter.com"},"link":"http://twitter.com/Mobanu/statuses/207958321003638785","body":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","object":{"objectType":"note","id":"object:search.twitter.com,2005:207958321003638785","summary":"Mobanu: Can Exercise Be Bad for You?: Researchers have found evidence that some people who exercise do worse on ... http://t.co/mTsQlNQO","link":"http://twitter.com/Mobanu/statuses/207958321003638785","postedTime":"2012-05-30T22:15:02.000Z"},"twitter_entities":{"urls":[{"display_url":"nyti.ms/KUmmMa","indices":[116,136],"expanded_url":"http://nyti.ms/KUmmMa","url":"http://t.co/mTsQlNQO"}],"hashtags":[],"user_mentions":[]},"gnip":{"language":{"value":"en"},"matching_rules":[{"value":"url_contains: nytimes.com","tag":null}],"klout_score":12,"urls":[{"url":"http://t.co/mTsQlNQO","expanded_url":"http://well.blogs.nytimes.com/2012/05/30/can-exercise-be-bad-for-you/?utm_medium=twitter&utm_source=twitterfeed"}]}}\r\n' json exception: Extra data: line 2 column 1 - line 4 column 1 (char 1891 - 5597) Header Output: HTTP/1.1 200 OK Content-Type: application/json; charset=UTF-8 Vary: Accept-Encoding Date: Wed, 30 May 2012 22:14:48 UTC Connection: close Transfer-Encoding: chunked Content-Encoding: gzip get_stream.py: #!/usr/bin/env python import sys import pycurl import json import pymongo STREAM_URL = "https://stream.test.com:443/accounts/publishers/twitter/streams/track/Dev.json" AUTH = "userid:passwd" DB_HOST = "127.0.0.1" DB_NAME = "stream_test" class StreamReader: def __init__(self): try: self.count = 0 self.buff = "" self.mongo = pymongo.Connection(DB_HOST) self.db = self.mongo[DB_NAME] self.raw_tweets = self.db["raw_tweets_gnip"] self.conn = pycurl.Curl() self.conn.setopt(pycurl.ENCODING, 'gzip') self.conn.setopt(pycurl.URL, STREAM_URL) self.conn.setopt(pycurl.USERPWD, AUTH) self.conn.setopt(pycurl.WRITEFUNCTION, self.on_receive) self.conn.setopt(pycurl.HEADERFUNCTION, self.header_rcvd) while True: self.conn.perform() except Exception as ex: print "error ocurred : %s" % str(ex) def header_rcvd(self, header_data): print header_data def on_receive(self, data): temp_data = data self.buff += data if data.endswith("\r\n") and self.buff.strip(): try: tweet = json.loads(self.buff, encoding = 'UTF-8') self.buff = "" if tweet: try: self.raw_tweets.insert(tweet) except Exception as insert_ex: print "Error inserting tweet: %s" % str(insert_ex) self.count += 1 if self.count % 10 == 0: print "inserted "+str(self.count)+" tweets" except Exception as json_ex: print "json exception: %s" % str(json_ex) print repr(temp_data) stream = StreamReader()

    Read the article

  • REST web service keeps first POST parametrs

    - by Diego
    I have a web service in REST, designed with Java and deployed on Tomcat. This is the web service structure: @Path("Personas") public class Personas { @Context private UriInfo context; /** * Creates a new instance of ServiceResource */ public Personas() { } @GET @Produces("text/html") public String consultarEdad (@QueryParam("nombre") String nombre) { ConectorCliente c = new ConectorCliente("root", "cafe.sql", "test"); int edad = c.consultarEdad(nombre); if (edad == Integer.MIN_VALUE) return "-1"; return String.valueOf(edad); } @POST @Produces("text/html") public String insertarPersona(@QueryParam("nombre") String msg, @QueryParam("edad") int edad) { ConectorCliente c = new ConectorCliente("usr", "passwd", "dbname"); c.agregar(msg, edad); return "listo"; } } Where ConectorCliente class is MySQL connector and querying class. So, I had tested this with the @GET actually doing POST work, any user inputed data and information from ma Java FX app and it went direct to webservice's database. However, I changed so the CREATE operation was performed through a webservice responding to an actual POST HTTP request. However, when I run the client and add some info, parameters go OK, but in next time I input different parameters it'll input the same. I run this several times and I can't get the reason of it. This is the clients code: public class WebServicePersonasConsumer { private WebTarget webTarget; private Client client; private static final String BASE_URI = "http://localhost:8080/GetSomeRest/serviciosweb/"; public WebServicePersonasConsumer() { client = javax.ws.rs.client.ClientBuilder.newClient(); webTarget = client.target(BASE_URI).path("Personas"); } public <T> T insertarPersona(Class<T> responseType, String nombre, String edad) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre", "edad"}; String[] queryParamValues = new String[]{nombre, edad}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request().post(null, responseType); } public <T> T consultarEdad(Class<T> responseType, String nombre) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre"}; String[] queryParamValues = new String[]{nombre}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request(javax.ws.rs.core.MediaType.TEXT_HTML).get(responseType); } private Form getQueryOrFormParams(String[] paramNames, String[] paramValues) { Form form = new javax.ws.rs.core.Form(); for (int i = 0; i < paramNames.length; i++) { if (paramValues[i] != null) { form = form.param(paramNames[i], paramValues[i]); } } return form; } public void close() { client.close(); } } And this this the code when I perform the operations in a Java FX app: String nombre = nombreTextField.getText(); String edad = edadTextField.getText(); String insertToDatabase = consumidor.insertarPersona(String.class, nombre, edad); So, as parameters are taken from TextFields, is quite odd why second, third, fourth and so on POSTS post the SAME.

    Read the article

  • Html LogIn form not functioning

    - by Tony C
    Ok, I have a login form that looks like this: <form id="loginForm" name="loginForm" method="post" action="login-exec.php"> <table width="300" border="0" align="center" cellpadding="2" cellspacing="0"> <tr> <td width="112"><b>Login</b></td> <td width="188"><input name="login" type="text" class="textfield" id="login" /></td> </tr> <tr> <td><b>Password</b></td> <td><input name="password" type="password" class="textfield" id="password" /></td> </tr> <tr> <td>&nbsp;</td> <td><input type="submit" name="Submit" value="Login" /></td> </tr> </table> </form> Now, This form is on a page in a directory called members. When i put it on a page in the home directory and change the action to "members/login-exec.php" When I try to logIn it just refreshes the page, but the name of the page in the browser changes to the actions taking place in the form. Any ideas on making this work guys? EDIT, heres the login-exec.php code: <?php //Start session session_start(); //Include database connection details require_once('config.php'); //Array to store validation errors $errmsg_arr = array(); //Validation error flag $errflag = false; //Connect to mysql server $link = mysql_connect(DB_HOST, DB_USER, DB_PASSWORD); if(!$link) { die('Failed to connect to server: ' . mysql_error()); } //Select database $db = mysql_select_db(DB_DATABASE); if(!$db) { die("Unable to select database"); } //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return mysql_real_escape_string($str); } //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Input Validations if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header("location: login-form.php"); exit(); } //Create query $qry="SELECT * FROM members WHERE login='$login' AND passwd='".md5($_POST['password'])."'"; $result=mysql_query($qry); //Check whether the query was successful or not if($result) { if(mysql_num_rows($result) == 1) { //Login Successful session_regenerate_id(); $member = mysql_fetch_assoc($result); $_SESSION['SESS_MEMBER_ID'] = $member['member_id']; $_SESSION['SESS_FIRST_NAME'] = $member['firstname']; $_SESSION['SESS_LAST_NAME'] = $member['lastname']; session_write_close(); header("location: members.php"); exit(); }else { //Login failed header("location: login-failed.php"); exit(); } }else { die("Query failed"); } ?>

    Read the article

  • CodePlex Daily Summary for Wednesday, December 01, 2010

    CodePlex Daily Summary for Wednesday, December 01, 2010Popular ReleasesUltimateJB: UltimateJB 2.02 PL3 KAKAROTO + CE-X-3.41 EvilSperm: Voici une version attendu avec impatience pour beaucoup : - La Version CEX341 pour pouvoir jouer avec des jeux demandant le firmware 3.50 ( certain ne fonctionne tous simplement pas ). - Pour l'instant le CEX341 n'est disponible qu'avec les PS3 en firmwares 3.41 !!! - La version PL3 KAKAROTO intégre ses dernières modification et intégre maintenant le firmware 3.30 !!! Conclusion : - UltimateJB CEX341 => Spoof le Firmware 3.41 en 3.50 ( facilite l'utilisation de certain jeux avec openManage...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.2 Beta2: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ContentRoot property) - Added properties AccessKey, AccessKeyModifier, AccessKeyElemen...EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...AI: Initial 0.0.1: It’s simply just one code file; it simulates AI and machine in a simulated world. The AI has a little understanding of its body machine and parts, and able to use its feet to do actions just start and stop walking. The world is all of white with nothing but just the machine on a white planet. Colors, odors and position information make no sense. I’m previous C# programmer and I’m learning F# during this project, although I’m still not a good F# programmer, in this project I learning to prog...Microsoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.DotSpatial: DotSpatial 11-28-2001: This release introduces some exciting improvements. Support for big raster, both in display and changing the scheme. Faster raster scheme creation for all rasters. Caching of the "sample" values so once obtained the raster symbolizer dialog loads faster. Reprojection supported for raster and image classes. Affine transform fully supported for images and rasters, so skewed images are now possible. Projection uses better checks when loading unprojected layers. GDAL raster support f...SuperWebSocket: SuperWebSocket(60438): It is the first release of SuperWebSocket. Because it is base on SuperSocket, most features of SuperSocket are supported in SuperWebSocket. The source code include a LiveChat demo.MDownloader: MDownloader-0.15.25.7002: Fixed updater Fixed FileServe Fixed LetItBitCropper: 1.9.4: Mostly fixes for issues with a few feature requests. Fixed Issues 2730 & 3638 & 14467 11044 11447 11448 11449 14665 Implemented Features 6123 11581PFC: PFC for PB 11.5: This is just a migration from the 11.0 code. No changes have been made yet (and they are needed) for it to work properly with 11.5.PDF Rider: PDF Rider 0.5: This release does not add any new feature for pdf manipulation, but enables automatic updates checking, so it is reccomended to install it in order to stay updated with next releases. Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0...BCLExtensions: BCL Extensions v1.0: The files associated with v1.0 of the BCL Extensions library.XamlQuery/WPF - The Write Less, Do More, WPF Library: XamlQuery-WPF v1.2 (Runtime, Source): This is the first release of popular XamlQuery library for WPF. XamlQuery has already gained recognition among Silverlight developers.Math.NET Numerics: Beta 1: First beta of Math.NET Numerics. Only contains the managed linear algebra provider. Beta 2 will include the native linear algebra providers along with better documentation and examples.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-25: Code samples for Visual Studio 2010Wii Backup Fusion: Wii Backup Fusion 0.8.5 Beta: - WBFS repair (default) options fixed - Transfer to image fixed - Settings ui widget names fixed - Some little bug fixes You need to reset the settings! Delete WiiBaFu's config file or registry entries on windows: Linux: ~/.config/WiiBaFu/wiibafu.conf Windows: HKEY_CURRENT_USER\Software\WiiBaFu\wiibafu Mac OS X: ~/Library/Preferences/com.wiibafu.wiibafu.plist Caution: This is a BETA version! Errors, crashes and data loss not impossible! Use in test environments only, not on productive syste...Minemapper: Minemapper v0.1.3: Added process count and world size calculation progress to the status bar. Added View->'Status Bar' menu item to show/hide the status bar. Status bar is automatically shown when loading a world. Added a prompt, when loading a world, to use or clear cached images.Sexy Select: sexy select v0.4: Changes in v0.4 Added method : elements. This returns all the option elements that are currently added to the select list Added method : selectOption. This method accepts two values, the element to be modified and the selected state. (true/false)New ProjectsAbstract SQL: ADO.NET Sql classes wrapper; provides a clean fluent interface library that allows you to write very concise code and avoid the repetitiveness of ADO.NET. It can be used in all types of applications, even supports CLR stored procedures. It is written in C# 2.0.AI: The Artificial Intelligence program built on F#.Another .NET wrapper for the MailChimp API: A .NET wrapper for the MailChimp API 1.3 written in F# by DK.App-V Tool Suite: A collection of tools for Microsoft Application Virtualization (App-V). These tools were developed at Sinclair Community College in the process of setting up and then supporting its App-V implementation.b2b: Project-01tBham.CmuCam: A library and GUI front-end for the CMUcam series of cameras for use by .NET-based applications, the GUI can also run standalone.BizTalk Deployment Tool: Yet another BizTalk Deployment Tool to make it easier for BizTalk deployment that needs to support orchestration versioning, multiple environments. Features includes but not limited to: GAC Verification, Receive Locations and Send Ports management, Orchestration States managementCertificate Request (PKCS#10) Generator: A .NET application that can create PKCS#10 Certificate Requests, either by generating a new key or reusing a preexisting one. Minimum requirement : Windows Vista and above. .NET 2.0.Cloud Billing: Cloud billing proposal.Currency Converter: Coding4Fun Windows Phone 7 Currency ConverterDiffLib: A diff implementation class library for .NET 3.5 written in C#.expression Blend 4.0 Comment Uncomment Xaml Code Extension: BlendShortCuts Extension makes it easier for blend users to comment and uncomment xaml code. you'll no longer have to insert tag <!-- --> just press ALt+C and ALT+U it's developed in c# (.Net framework 4.0, microsoft expression library)Game Studio: Game Studio is an Integrated Development Environment “IDE” that helps game developers in designing their games. The software generates code for the mesh, models, pictures and sounds. It has a form designer, code editor and a special framework for the “Game Studio”.Gridify for ASP.NET MVC: Easy solution for grids on top of ASP.NET MVC Make grids from your data tables in a really lightweight manner! How lightweight? Well, exactly TWO line changes. You don't have to add new action parameters or anything. Really simple!In-House Inventory System: a normal inventory management system, normal use case and normal function.In-House Money Saver: just for school project, it may not be useful, however, it is my first project using Microsoft technology.ITICup2009: Programs used in ITICup 2009.libobs++: Implementation of a signal/slot system, created exclusively for developers that uses Visual Studio's 2010 IDE/Compiler. The classes are templated, and really easy to learn. The callbacks are fast, and type-safe.Longan ERP: Open Source Business Solutions.Lucienne - WebScripting Assignment: Lucienne - WebScripting AssignmentMercurial.Net: .NET wrapper class library for the Mercurial Distributed Version Control System (DVCS) - (http://mercurial.selenic.com/), written in C# 3.0 for the .NET 3.5 Client Profile runtime.Mini C++ UI Framework: Mini C++ UI Framework for my work.MinuRaamu: MeieRaamuMobile Device Browser File: The Mobile Browser Definition File contains definitions for individual mobile devices and browsers. At run time, ASP.NET uses the information in the request header to determine what type of device/browser has made the request.NKinect: .NET 4.0 (C++/CLI) based open source implementation of Microsoft Kinect. Currently supports CodeLaboratories NUI SDK, but will be brought to OpenKinect/libfreenect when a Windows version is stable.Oblivion Cell - Oblivion mmo project: We are working on creating a mmorpg mod/Addon for Oblivion using C# and hooking to the accual game with obse and a few other mods. We also use Cell Framework for our base server system.Optional: Optional is a library to create options and commands from command-line arguments. It uses Convention over Configuration to get out of your way. Attributes can be used to set properties which differ from the convention.Paypal adaptive payments using .NET (C#): This is a C# project to help you interface with the PayPal adaptive payments API. https://www.x.com/community/ppx/adaptive_payments. POS bd: Dynamic POS. this project is being devoloped on focused to local market only. the initial project is projected for a single company whose main business is selling lighting-bulb instruments.PowerEvents for Windows PowerShell: A Microsoft Windows PowerShell module to assist with managing permanent WMI event consumer registrations. You can use this module to register for, and respond to, system-level events available to WMI.PPL Daily Report Helper: Daily Reporting Helper Tool for Phoenix Propulsion LabsRandom Passwd Generator: This is a simple program developed in C# that generates random passwords of the specified length with the specified characters to be used. It's in beta version.SharePoint MUI Manager: The SharePoint MUI Manager allows you to translate user-specified text, such as the Title and Description of the site, throught the web interface. There is no need to download, edit and upload a RESX file. Sqlite Client for Windows Phone: Sqlite client for Windows Phone 7 . Supports transactionsTouchToolkit: A toolkit to simplify the multi-touch application development and testing complexities. It currently supports WPF and Silverlight.TSI4: Proyecto para facultad de ingenieríaVS2010 Debugger Visualizers Contrib: This project is for hosting user-contributed debugger visualizers for Microsoft Visual Studio 2010.Windows Shell Framework: Windows Shell Framework is a managed wrappers for a subset of the windows shell. This Project is for of .NET Shell Namespace Extension FrameworkWork in Progress: Work in progressWPFtest: A simpel test project for experimenting with WPF.YingYangXonix: YingYangXonixZeroUnit.net: The zero dependency, zero friction, sugar free Unit Testing framework for .Net.ZXing barcode for Windows Phone: Barcode support for Windows Phone 7 using ZXing

    Read the article

  • Creating static NAT blocks outbound traffic Cisco ASA

    - by natediggs
    Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

    Read the article

  • Cisco VPN Client Behind ASA 5505

    - by fdf33
    I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

    Read the article

  • Can't connect to samba

    - by Rick
    Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

    Read the article

  • Installing Oracle 11gR2 on RHEL 6.2

    - by Chris
    Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors Sorry for the bad styling copy paste isn't working correctly The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine I followed the following documentation http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm I bolded the steps which I was least sure about from my research Easy installed with RHEL 6.2 for VMWARE Registered with red hat so I can get updates Reinstalled vmware-tools by pressing enter at every choice Sudo yum update at the end something about GPG key selected y then y Checked Memory Requirements grep MemTotal /proc/meminfo MemTotal: 3921368 kb uname -m x86_64 grep SwapTotal /proc/meminfo SwapTotal: 6160376 kb free total used free shared buffers cached Mem: 3921368 2032012 1889356 0 76216 1533268 -/+ buffers/cache: 422528 3498840 Swap: 6160376 0 6160376 df -h /dev/shm Filesystem Size Used Avail Use% Mounted on tmpfs 1.9G 276K 1.9G 1% /dev/shm df -h /tmp Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / tmpfs 1.9G 276K 1.9G 1% /dev/shm /dev/sda1 291M 58M 219M 21% /boot All looked fine to me except maybe for swap? Software Requirements cat /proc/version Linux version 2.6.32-220.el6.x86_64 ([email protected]) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011 uname -r 2.6.32-220.el6.x86_64 (same as above but whatever) According to the tutorial should be On Red Hat Enterprise Linux 6 2.6.32-71.el6.x86_64 or later These are the versions of software I have installed binutils-2.20.51.0.2-5.28.el6.x86_64 compat-libcap1-1.10-1.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 compat-libstdc++-33.i686 0:3.2.3-69.el6 gcc-4.4.6-3.el6.x86_64 gcc-c++.x86_64 0:4.4.6-3.el6 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.47.el6_2.12.i686 glibc-devel-2.12-1.47.el6_2.12.x86_64 glibc-devel.i686 0:2.12-1.47.el6_2.12 ksh.x86_64 0:20100621-12.el6_2.1 libgcc-4.4.6-3.el6.x86_64 libgcc-4.4.6-3.el6.i686 libstdc++-4.4.6-3.el6.x86_64 libstdc++.i686 0:4.4.6-3.el6 libstdc++-devel.i686 0:4.4.6-3.el6 libstdc++-devel-4.4.6-3.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-devel-0.3.107-10.el6.x86_64 libaio-devel-0.3.107-10.el6.i686 make-3.81-19.el6.x86_64 sysstat-9.0.4-18.el6.x86_64 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.i686 8. Probably screwed up here or step 9 /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba(not sure why this isn't in the tutorial) /usr/sbin/useradd -g oinstall -G dba oracle passwd oracle /sbin/sysctl -a | grep sem Xkernel.sem = 250 32000 32 128 /sbin/sysctl -a | grep shm kernel.shmmax = 68719476736 kernel.shmall = 4294967296 kernel.shmmni = 4096 vm.hugetlb_shm_group = 0 /sbin/sysctl -a | grep file-max Xfs.file-max = 384629 /sbin/sysctl -a | grep ip_local_port_range Xnet.ipv4.ip_local_port_range = 32768 61000 /sbin/sysctl -a | grep rmem_default Xnet.core.rmem_default = 124928 /sbin/sysctl -a | grep rmem_max Xnet.core.rmem_max = 131071 /sbin/sysctl -a | grep wmem_max Xnet.core.wmem_max = 131071 /sbin/sysctl -a | grep wmem_default Xnet.core.wmem_default = 124928 Here is my sysctl.conf file I only added the items that were bigger: Kernel sysctl configuration file for Red Hat Linux # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and sysctl.conf(5) for more details. Controls IP packet forwarding net.ipv4.ip_forward = 0 Controls source route verification net.ipv4.conf.default.rp_filter = 1 Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 Controls whether core dumps will append the PID to the core filename. Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 /sbin/sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 su - oracle ulimit -Sn 1024 ulimit -Hn 1024 ulimit -Su 1024 ulimit -Hu 30482 ulimit -Su 1024 ulimit -Ss 10240 ulimit -Hs unlimited su - nano /etc/security/limits.conf *added to the end of the file * oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 oracle soft stack 10240 exit exit su - mkdir -p /app/ chown -R oracle:oinstall /app/ chmod -R 775 /app/ 9. THIS IS PROBABLY WHERE I MESSED UP I then exited out of the root account so now I'm back in my account chris then I su - oracle echo $SHELL /bin/bash umask 0022 (so it should be set already to what is neccesary) Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost I then opened the .bash_profile of the oracle and changed it to the following .bash_profile Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi User specific environment and startup programs PATH=$PATH:$HOME/bin; export PATH ORACLE_BASE=/app/oracle ORACLE_SID=orcl export ORACLE_BASE ORACLE_SID I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then: su - for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted then same as before su - cp -R linux_oracle/database /db; chown -R oracle:oinstall /db; chmod -R 775 /db; ll /db drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database exit su - oracle cd /db/database ./runInstaller AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647) at java.lang.Runtime.load0(Runtime.java:769) at java.lang.System.load(System.java:968) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668) at java.lang.Runtime.loadLibrary0(Runtime.java:822) at java.lang.System.loadLibrary(System.java:993) at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Toolkit.java:1509) at java.awt.Toolkit.(Toolkit.java:1530) at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source) at com.jgoodies.looks.LookUtils.(Unknown Source) at com.jgoodies.looks.plastic.PlasticLookAndFeel.(PlasticLookAndFeel.java:122) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:242) at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783) at javax.swing.UIManager.setLookAndFeel(UIManager.java:480) at oracle.install.commons.util.Application.startup(Application.java:758) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181) at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265) at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114) at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

    Read the article

  • Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

    - by milkandtang
    I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

    Read the article

  • Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

    - by GriffJ
    Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

    Read the article

  • Linux (NAS) Permissions problem (Permission Denied)

    - by calumbrodie
    This is probably easier to show than to explain... -bash-3.2$ id uid=501(admin) gid=503(admin) groups=100(users),501(admins),503(admin) -bash-3.2$ groups admin users admins -bash-3.2$ ls -l total 8 drwxrwxrwx 78 admin www 4096 Dec 9 09:02 Inbox drwxrwxrwx 21 admin www 4096 Dec 8 21:45 Movies drwxrwx--- 3 admin www 52 Dec 9 07:57 TV -bash-3.2$ cd Movies -bash-3.2$ ls -l total 20 drwxrwx--- 7 admin www 4096 Dec 8 00:04 Action drwxrwx--- 6 admin www 4096 Dec 8 00:05 Animation drwxrwx--- 4 admin www 4096 Dec 8 00:17 Comedy drwxrwx--- 4 admin www 4096 Dec 8 00:14 Drama drwxrwx--- 4 admin www 4096 Dec 8 00:14 Family drwxrwx--- 6 admin www 58 Dec 6 19:10 Foreign Language drwxrwx--- 2 admin www 31 Dec 7 23:58 Horror drwxrwx--- 3 admin www 50 Dec 8 00:15 Science Fiction drwxrwx--- 2 admin www 6 Dec 8 00:16 Thriller -bash-3.2$ cd ../Inbox -bash: cd: ../Inbox: Permission denied Filesystem is XFS. Are there permissions on the directories that ls -l wouldn't show? I'm the owner of all directories and files inside them. I can sudo to modify the file permissions or view the contents of the folders but I need them to be accessible by 'admin'. Any ideas? I'll be checking the question regularly so let me know if I need to update this with more information. Thanks Edit : Added strace execve("/bin/ls", ["ls", "Inbox"], [/* 21 vars */]) = 0 brk(0) = 0x26000 uname({sys="Linux", node="axentraserver.the-brodie-stora.mystora.com", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0P\25\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=39776, ...}) = 0 mmap2(NULL, 57816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000 mprotect(0x4002b000, 28672, PROT_NONE) = 0 mmap2(0x40032000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40032000 close(3) = 0 open("/lib/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\24\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134375, ...}) = 0 mmap2(NULL, 54368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40034000 mprotect(0x4003a000, 28672, PROT_NONE) = 0 mmap2(0x40041000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40041000 close(3) = 0 open("/lib/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2147\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=297439, ...}) = 0 mmap2(NULL, 117504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40042000 mprotect(0x40056000, 28672, PROT_NONE) = 0 mmap2(0x4005d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x4005d000 close(3) = 0 open("/lib/libgcc_s.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\"\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43164, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 74572, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000 mprotect(0x4006a000, 28672, PROT_NONE) = 0 mmap2(0x40071000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0x40071000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0XI\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1517948, ...}) = 0 mmap2(NULL, 1245628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40072000 mprotect(0x40195000, 32768, PROT_NONE) = 0 mmap2(0x4019d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123) = 0x4019d000 mmap2(0x401a0000, 8636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a0000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\230A\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=121044, ...}) = 0 mmap2(NULL, 115184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401a3000 mprotect(0x401b5000, 28672, PROT_NONE) = 0 mmap2(0x401bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x401bc000 mmap2(0x401be000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401be000 close(3) = 0 open("/lib/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\364\f\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=40571, ...}) = 0 mmap2(NULL, 45512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401c0000 mprotect(0x401c3000, 32768, PROT_NONE) = 0 mmap2(0x401cb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x401cb000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\254\10\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15344, ...}) = 0 mmap2(NULL, 41116, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401cc000 mprotect(0x401ce000, 28672, PROT_NONE) = 0 mmap2(0x401d5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x401d5000 close(3) = 0 open("/lib/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\330/\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=228044, ...}) = 0 mmap2(NULL, 301748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401d7000 mprotect(0x4020f000, 28672, PROT_NONE) = 0 mmap2(0x40216000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x37) = 0x40216000 mmap2(0x40217000, 39604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40217000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40221000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40222000 set_tls(0x40221d00, 0x40221d00, 0x40024000, 0x402223e8, 0x41) = 0 mprotect(0x401d5000, 4096, PROT_READ) = 0 mprotect(0x401bc000, 4096, PROT_READ) = 0 mprotect(0x4019d000, 8192, PROT_READ) = 0 mprotect(0x4005d000, 4096, PROT_READ) = 0 mprotect(0x40032000, 4096, PROT_READ) = 0 mprotect(0x40023000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 set_tid_address(0x402218a8) = 9539 set_robust_list(0x402218b0, 0xc) = 0 rt_sigaction(SIGRTMIN, {0x401a6d90, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x401a6c64, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x26000 brk(0x47000) = 0x47000 open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "rootfs / rootfs rw 0 0\nubi0:root"..., 1024) = 1024 read(3, "fs.xino,noplink,create=mfs,sum,b"..., 1024) = 428 read(3, "", 1024) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 access("/etc/selinux/", F_OK) = 0 open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=52, ws_col=153, ws_xpixel=918, ws_ypixel=728}) = 0 stat64("Inbox", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\304\27\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=49256, ...}) = 0 mmap2(NULL, 70316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40223000 mprotect(0x4022c000, 28672, PROT_NONE) = 0 mmap2(0x40233000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40233000 close(3) = 0 mprotect(0x40233000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1661, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1661 close(3) = 0 munmap(0x4001d000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=700, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 700 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("Inbox", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 EACCES (Permission denied) write(2, "ls: ", 4ls: ) = 4 write(2, "Inbox", 5Inbox) = 5 write(2, ": Permission denied", 19: Permission denied) = 19 write(2, "\n", 1 ) = 1 close(1) = 0 exit_group(2) = ? 2nd edit: Elaboration for Mike. The Inbox sits at the following location /home/admin/MyLibrary/MyVideos/Inbox /home/admin/MyLibrary/MyVideos/Movies The system is a Netgear Stora NAS box that I have root access to. The /home/ folder is mounted as an smb share on various computers around the house. The folder /Inbox cannot be opened on any of those machines (they all connect as 'admin'). When I ssh into the box using the 'admin' credentials I am also unable to access the folder. The folder was created via a Web Admin page hosted on the NAS. The user/group for the Inbox folder was previously apache:www (expected as this folder was created by the web application), but I chmod/chowned the folder as the root user in an attempt to grant the admin user (therefore the rest of the connected machines) access to the files. Sorry for not including this earlier, I wasn't sure if it was relevant and didn't want to confuse the situation. -Thanks 3rd Edit Sorry again - It looks like this NAS is running some custom version of Red Hat, not Debian as previously stated - I'm not sure if this makes a difference

    Read the article

  • How to remove the hint in the terminal?

    - by jiangchengwu
    As a normal user , when I run some command like ps\netstat, the terminal hint me: (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) I know could redirect STDERR to /dev/null can remove this hint. But I want to know is there any way to remove it , such as edit some configuration files ? [deploy@storage2 ~]$ ps -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) procps version 3.2.7 [deploy@storage2 ~]$ ps -V 2>/dev/null procps version 3.2.7 My OS info: [deploy@storage2 ~]$ uname -a Linux storage2 2.6.18-243.el5 #1 SMP Mon Feb 7 18:47:27 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [deploy@storage2 ~]$ lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [deploy@storage2 ~]$ netstat -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) net-tools 1.60 netstat 1.42 (2001-04-15) Fred Baumgarten, Alan Cox, Bernd Eckenfels, Phil Blundell, Tuan Hoang and others +NEW_ADDRT +RTF_IRTT +RTF_REJECT +FW_MASQUERADE +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB There are more info from strace: [deploy@storage2 ~]$ strace ps -V execve("/bin/ps", ["ps", "-V"], [/* 27 vars */]) = 0 brk(0) = 0x929a000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \241\210\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=101404, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fdd000 mmap2(0x887000, 92104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x887000 mmap2(0x89a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x89a000 mmap2(0x89c000, 6088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x89c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Pzt\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16428, ...}) = 0 mmap2(0x747000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x747000 mmap2(0x749000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x749000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\204p\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=208352, ...}) = 0 mmap2(0x705000, 155760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x705000 mmap2(0x72a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24) = 0x72a000 close(3) = 0 open("/lib/libcrypt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\246q\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=45288, ...}) = 0 mmap2(0x71a000, 201020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fab000 mmap2(0xf7fb4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7fb4000 mmap2(0xf7fb6000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fb6000 close(3) = 0 open("/lib/libutil.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \n\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=13420, ...}) = 0 mmap2(NULL, 12428, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fa7000 mmap2(0xf7fa9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xfffffffff7fa9000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@(s\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=129716, ...}) = 0 mmap2(0x72e000, 90596, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x72e000 mmap2(0x741000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x741000 mmap2(0x743000, 4580, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x743000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340?]\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1611564, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa6000 mmap2(0x5be000, 1328580, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5be000 mmap2(0x6fd000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13f) = 0x6fd000 mmap2(0x700000, 9668, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x700000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa5000 set_thread_area(0xffd61bb4) = 0 mprotect(0x6fd000, 8192, PROT_READ) = 0 mprotect(0x741000, 4096, PROT_READ) = 0 mprotect(0xf7fa9000, 4096, PROT_READ) = 0 mprotect(0xf7fb4000, 4096, PROT_READ) = 0 mprotect(0x72a000, 4096, PROT_READ) = 0 mprotect(0x749000, 4096, PROT_READ) = 0 mprotect(0x89a000, 4096, PROT_READ) = 0 mprotect(0x5ba000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 set_tid_address(0xf7fa5708) = 20214 set_robust_list(0xf7fa5710, 0xc) = 0 futex(0xffd61f74, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4007323d0, [], 0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x10000004007322e0, [], 0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=-4284481536, rlim_max=67108864*1024}) = 0 uname({sys="Linux", node="storage2", ...}) = 0 readlink("/proc/self/exe", "/bin/ps"..., 260) = 7 brk(0) = 0x929a000 brk(0x92bb000) = 0x92bb000 open("/bin/ps", O_RDONLY|O_LARGEFILE) = 3 _llseek(3, -12, [711660], SEEK_END) = 0 read(3, "\274U!\253\2\0\0\0\224\237\t\0", 12) = 12 mmap2(NULL, 634880, PROT_READ, MAP_SHARED, 3, 0x13) = 0xfffffffff7f0a000 mmap2(NULL, 630784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7e70000 close(3) = 0 futex(0x74a06c, FUTEX_WAKE_PRIVATE, 2147483647) = 0 geteuid32() = 501 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\30\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=46680, ...}) = 0 mmap2(NULL, 41616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7e65000 mmap2(0xf7e6e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7e6e000 close(3) = 0 mprotect(0xf7e6e000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2166, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2166 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 mkdir("/tmp/pdk-deploy/", 0755) = -1 EEXIST (File exists) mkdir("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a", 0755) = -1 EEXIST (File exists) open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY|O_LARGEFILE) = 3 close(3) = 0 open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300!\2\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0664, st_size=1264090, ...}) = 0 mmap2(NULL, 1140104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7d4e000 mmap2(0xf7e5a000, 45056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b) = 0xfffffffff7e5a000 close(3) = 0 rt_sigaction(SIGFPE, {0x1000000000000001, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|SA_SIGINFO|0x3d61cb8, (nil)}, {SIG_DFL, ~[HUP INT ILL ABRT BUS SEGV USR2 PIPE ALRM TERM STOP TSTP TTIN TTOU XCPU WINCH IO PWR SYS RTMIN RT_1 RT_2 RT_4 RT_5 RT_8 RT_9 RT_11 RT_12 RT_13 RT_16 RT_17 RT_18 RT_22 RT_24 RT_25 RT_26 RT_27 RT_28 RT_29 RT_30 RT_31], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 getuid32() = 501 geteuid32() = 501 getgid32() = 502 getegid32() = 502 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=56454896, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7b4e000 mmap2(NULL, 241664, PROT_READ, MAP_PRIVATE, 3, 0x13ec) = 0xfffffffff7b13000 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 3, 0x1466) = 0xfffffffff7b12000 close(3) = 0 mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7af1000 time(NULL) = 1348210009 readlink("/proc/self/exe", "/bin/ps"..., 4095) = 7 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 _llseek(0, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(1, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(2, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(2, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61978) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 brk(0x92dc000) = 0x92dc000 getppid() = 20212 stat64("/opt/ActivePerl-5.8/site/lib/sitecustomize.pl", 0xffd61560) = -1 ENOENT (No such file or directory) close(3) = 0 open("/usr/lib/.khostd/.hostconf", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61828) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=334, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 read(3, "bindport=9001\ntrustip=221.122.57"..., 4096) = 334 read(3, "", 4096) = 0 close(3) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20215 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 read(3, (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) "tcp 0 0 0.0.0.0:9001"..., 4096) = 109 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 waitpid(20215, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20215 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/usr/lib/.khostd") = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20218 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20218, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20218 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/home/deploy") = 0 stat64("/etc/cron.hourly/hichina", {st_mode=S_IFREG|0755, st_size=711660, ...}) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20230 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "procps version 3.2.7\n", 4096) = 21 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20230, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20230 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 write(1, "procps version 3.2.7\n", 21procps version 3.2.7 ) = 21 munmap(0xf7af1000, 135168) = 0 munmap(0xf7e70000, 630784) = 0 munmap(0xf7f0a000, 634880) = 0 munmap(0xf7d4e000, 1140104) = 0 exit_group(0) = ? [ Process PID=20214 runs in 32 bit mode. ] Thank you very much.

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • Problem using a public key when connecting to a SSH server running on Cygwin

    - by binary255
    We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

    Read the article

  • Problem using a public key when connecting to a SSH server running on Cygwin

    - by Deleted
    We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

    Read the article

  • Set up linux box for secure local hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

    Read the article

  • How to use data of one table in 'where' clause of another table?

    - by sahar
    hello, i need ur help guys..i m making website for 'home docor ideas'..i have a log in form(login-form.php) in which when 'log in' and 'password' is inserted,after verification through login-execute.php, redirected to viewOrder.php where user can view all of the orders ordered by clients.. all is fine up till here.. but what i want is,when user get logged in ,he view only that order which is ordered by him not all customer's orders.. two tables are there in database: members and order_insert.. in 'members' table, login and password is stored and in 'order_insert',orders of customers is stored.. codes of these three pages is as follows.. ......................... login-form.php ......................... <form id="loginForm" name="loginForm" method="post" action="login-exec.php"> <table width="300" border="0" align="center" cellpadding="2" cellspacing="0"> <tr> <td width="112"><b>Login</b></td> <td width="188"><input name="login" type="text" class="textfield" id="login" /></td> </tr> <tr> <td><b>Password</b></td> <td><input name="password" type="password" class="textfield" id="password" /></td> </tr> <tr> <td>&nbsp;</td> <td><input type="submit" name="Submit" value="Login" /></td> </tr> </table> </form> ......................... login-execute.php ......................... <?php //Start session session_start(); //Include database connection details require_once('config.php'); //Array to store validation errors $errmsg_arr = array(); //Validation error flag $errflag = false; //Connect to mysql server $link = mysql_connect(DB_HOST, DB_USER, DB_PASSWORD); if(!$link) { die('Failed to connect to server: ' . mysql_error()); } //Select database $db = mysql_select_db(DB_DATABASE); if(!$db) { die("Unable to select database"); } //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return mysql_real_escape_string($str); } //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Input Validations if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header("location: login-form.php"); exit(); } //Create query $qry="SELECT * FROM members WHERE login='$login' AND passwd='".md5($_POST['password'])."'"; $result=mysql_query($qry); //Check whether the query was successful or not if($result) { if(mysql_num_rows($result) == 1) { //Login Successful session_regenerate_id(); $member = mysql_fetch_assoc($result); $_SESSION['SESS_MEMBER_ID'] = $member['member_id']; $_SESSION['SESS_FIRST_NAME'] = $member['firstname']; $_SESSION['SESS_LAST_NAME'] = $member['lastname']; session_write_close(); header("location: viewOrder.php"); exit(); }else { //Login failed header("location: login-failed.php"); exit(); } }else { die("Query failed"); } ?> ............................. viewOrder.php .............................. <html> <body bgcolor="#FFFFFF" > <? $host="localhost"; // Host name $username="root"; // Mysql username $password=""; // Mysql password $db_name="mydatabase"; // Database name $tbl_name="order_insert"; // Table name $tbl_name2="members"; // connect to server and databases mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); $result = mysql_query("SELECT * FROM $tbl_name "); print "<center>"; $output .= "<table width=1100 border=1 bordercolor=black>"; $output .= "<tr align=center><td>ID</td><td>First Name</td><td>Last Name</td><td>E Mail</td><td> City </td><td> Country </td><td> Phone</td><td>Decoration Type</td><td>Service Description</td><td>Budget</td><td>Update</td><td>Delete</td></tr>"; $output .= "<th></th><th></th>"; $output .= "</tr>\n\n"; while ($row = mysql_fetch_assoc($result)){ $output .= "<tr>\n"; foreach ($row as $col=>$val){ $output .= " <td>$val</td>\n"; } // end foreach $keyVal = $row["id"]; $output .= "<td><a href='update.php?ID=$row[orderId]' >Update </a></td>"; $output .= "<td><a href='delete.php?ID=$row[orderId]' >Delete </a></td>"; $output .= "</tr>\n\n"; }// end while $output .= "</table></center>"; print "$output"; ?>&nbsp;&nbsp;&nbsp;<br> <br> <center><table > <tr><td> <form action="home.php"><font color="#FF0000"><input type="submit" name="btn" style="color:#CC0000" value="<--Back" ></font></form></td></tr></table></center> </body> </html> ..... your help and suggestions will be appreciated

    Read the article

  • PHP Pear Installation on CentOS

    - by Prabhakar
    [root@ip ~]# yum install php-pear* Reducing CentOS-5 Testing to included packages only Finished Setting up Install Process Package 1:php-pear-1.8.1-2.el5.centos.noarch already installed and latest versio n Package php-pear-XML-Util is obsoleted by php-pear, trying to install 1:php-pear -1.8.1-2.el5.centos.noarch instead Package 1:php-pear-1.8.1-2.el5.centos.noarch already installed and latest versio n Package php-pear-DB is obsoleted by php-pear-db, trying to install php-pear-db-1 .7.13-2.el5.rf.noarch instead Resolving Dependencies --> Running transaction check ---> Package php-pear-Auth-RADIUS.noarch 0:1.0.6-1.el5 set to be updated --> Processing Dependency: php-pecl(radius) >= 1.2.5 for package: php-pear-Auth- RADIUS --> Processing Dependency: php-mcrypt for package: php-pear-Auth-RADIUS ---> Package php-pear-Auth-SASL.noarch 0:1.0.4-1.el5 set to be updated ---> Package php-pear-Benchmark.noarch 0:1.2.7-1.el5 set to be updated ---> Package php-pear-CAS.noarch 0:1.1.3-1.el5 set to be updated --> Processing Dependency: php-domxml-php4-php5 for package: php-pear-CAS ---> Package php-pear-Cache-Lite.noarch 0:1.7.5-1.el5 set to be updated ---> Package php-pear-CodeGen.noarch 0:1.0.7-3.el5 set to be updated ---> Package php-pear-CodeGen-PECL.noarch 0:1.1.3-3.el5 set to be updated ---> Package php-pear-Console-CommandLine.noarch 0:1.1.3-3.el5 set to be updated ---> Package php-pear-Console-Getargs.noarch 0:1.3.5-1.el5 set to be updated ---> Package php-pear-Console-ProgressBar.noarch 0:0.5.2-0.2.beta.el5 set to be updated ---> Package php-pear-Console-Table.noarch 0:1.1.1-1.el5 set to be updated ---> Package php-pear-Crypt-Blowfish.noarch 0:1.0.1-1.el5 set to be updated ---> Package php-pear-Crypt-CHAP.noarch 0:1.0.2-1.el5 set to be updated ---> Package php-pear-DB-DataObject.noarch 0:1.8.12-1.el5 set to be updated ---> Package php-pear-DB-DataObject-FormBuilder.noarch 0:1.0.0-1.el5 set to be u pdated ---> Package php-pear-DB-QueryTool.noarch 0:1.1.2-1.el5 set to be updated ---> Package php-pear-Date.noarch 0:1.4.7-2.el5.centos set to be updated ---> Package php-pear-Date-Holidays.noarch 0:0.21.4-1.el5 set to be updated ---> Package php-pear-Date-Holidays-USA.noarch 0:0.1.1-1.el5 set to be updated ---> Package php-pear-Event-Dispatcher.noarch 0:1.1.0-1.el5 set to be updated ---> Package php-pear-File.noarch 0:1.2.2-1.el5.centos set to be updated ---> Package php-pear-File-Find.noarch 0:1.3.0-1.el5 set to be updated ---> Package php-pear-File-Passwd.noarch 0:1.1.7-1.el5 set to be updated ---> Package php-pear-File-SMBPasswd.noarch 0:1.0.3-1.el5 set to be updated ---> Package php-pear-HTML-Common.noarch 0:1.2.5-1.el5 set to be updated ---> Package php-pear-HTML-QuickForm.noarch 0:3.2.12-1.el5 set to be updated ---> Package php-pear-HTML-QuickForm-ElementGrid.noarch 0:0.1.1-1.el5 set to be updated ---> Package php-pear-HTML-QuickForm-advmultiselect.noarch 0:1.4.1-1.el5 set to be updated ---> Package php-pear-HTML-Table.noarch 0:1.7.5-1.el5 set to be updated ---> Package php-pear-HTML-Template-IT.noarch 0:1.3.0-2.el5 set to be updated ---> Package php-pear-HTML_Template_PHPLIB.noarch 0:1.4.0-2.el5 set to be update d ---> Package php-pear-HTTP.noarch 0:1.4.0-7.el5 set to be updated ---> Package php-pear-HTTP-Client.noarch 0:1.1.1-1.el5 set to be updated ---> Package php-pear-HTTP-Request.noarch 0:1.4.4-1.el5 set to be updated ---> Package php-pear-HTTP-Upload.noarch 0:0.9.1-2.el5 set to be updated ---> Package php-pear-Image-Canvas.noarch 0:0.3.1-1.el5 set to be updated ---> Package php-pear-Image-Color.noarch 0:1.0.3-1.el5 set to be updated ---> Package php-pear-Image-Graph.noarch 0:0.8.0-1.el5 set to be updated ---> Package php-pear-Image-GraphViz.noarch 0:1.2.1-4.el5 set to be updated --> Processing Dependency: graphviz for package: php-pear-Image-GraphViz ---> Package php-pear-Log.noarch 0:1.12.7-1.el5 set to be updated ---> Package php-pear-MDB2.noarch 0:2.4.1-2.el5.centos set to be updated ---> Package php-pear-MDB2-Driver-mysql.noarch 0:1.4.1-3.el5.centos set to be up dated ---> Package php-pear-MDB2-Driver-pgsql.noarch 0:1.4.1-1.el5 set to be updated ---> Package php-pear-MDB2-Schema.noarch 0:0.8.0-2.el5 set to be updated ---> Package php-pear-Mail.noarch 0:1.1.14-5.el5.1 set to be updated ---> Package php-pear-Mail-Mime.noarch 0:1.4.0-1.el5.centos set to be updated ---> Package php-pear-Math-Stats.noarch 0:0.9.0-0.1.beta3.el5 set to be updated ---> Package php-pear-Net-Curl.noarch 0:1.2.5-1.el5 set to be updated ---> Package php-pear-Net-DIME.noarch 0:1.0.1-1.el5 set to be updated ---> Package php-pear-Net-FTP.noarch 0:1.3.4-1.el5 set to be updated ---> Package php-pear-Net-POP3.noarch 0:1.3.7-1.el5 set to be updated ---> Package php-pear-Net-Ping.noarch 0:2.4.5-1.el5 set to be updated ---> Package php-pear-Net-SMTP.noarch 0:1.4.4-1.el5 set to be updated ---> Package php-pear-Net-Sieve.noarch 0:1.3.2-1.el5 set to be updated ---> Package php-pear-Net-Socket.noarch 0:1.0.10-1.el5 set to be updated ---> Package php-pear-Net-Traceroute.noarch 0:0.21.3-1.el5 set to be updated ---> Package php-pear-Net-URL.noarch 0:1.0.15-1.el5.centos set to be updated ---> Package php-pear-Net-URL-Mapper.noarch 0:0.9.0-2.el5.1 set to be updated ---> Package php-pear-Net-URL2.noarch 0:0.3.0-1.el5 set to be updated ---> Package php-pear-Net-UserAgent-Detect.noarch 0:2.5.2-1.el5 set to be update d ---> Package php-pear-Numbers-Roman.noarch 0:1.0.2-2.el5 set to be updated ---> Package php-pear-Numbers-Words.noarch 0:0.16.1-1.el5 set to be updated ---> Package php-pear-OLE.noarch 0:1.0.0-0.4.rc1.el5 set to be updated ---> Package php-pear-PHP-CodeSniffer.noarch 0:1.2.2-1.el5 set to be updated ---> Package php-pear-PHP-Compat.noarch 0:1.5.0-1.el5 set to be updated ---> Package php-pear-PHP-CompatInfo.noarch 0:1.4.3-1.el5 set to be updated ---> Package php-pear-PHPUnit.noarch 0:3.3.5-2.el5 set to be updated --> Processing Dependency: php-pecl(Xdebug) >= 2.0.0 for package: php-pear-PHPUn it --> Processing Dependency: php-channel(pear.phpunit.de) for package: php-pear-PH PUnit ---> Package php-pear-Pager.noarch 0:2.4.8-1.el5 set to be updated ---> Package php-pear-Payment-Process.noarch 0:0.6.6-1.el5 set to be updated ---> Package php-pear-Phlickr.noarch 0:0.2.7-2.el5 set to be updated ---> Package php-pear-PhpDocumentor.noarch 0:1.4.3-1.el5 set to be updated --> Processing Dependency: php-Smarty >= 2.6.0 for package: php-pear-PhpDocument or ---> Package php-pear-PhpDocumentor-docs.noarch 0:1.4.3-1.el5 set to be updated ---> Package php-pear-SOAP.noarch 0:0.11.0-2.el5 set to be updated ---> Package php-pear-Spreadsheet-Excel-Writer.noarch 0:0.9.2-2.el5 set to be up dated ---> Package php-pear-Structures-DataGrid.noarch 0:0.8.3-1.el5 set to be updated ---> Package php-pear-Structures-DataGrid-DataSource-Array.noarch 0:0.1.3-1.el5 set to be updated ---> Package php-pear-Structures-DataGrid-DataSource-DataObject.noarch 0:0.1.2-1 .el5 set to be updated ---> Package php-pear-Structures-DataGrid-DataSource-MDB2.noarch 0:0.1.10-1.el5 set to be updated ---> Package php-pear-Structures-DataGrid-DataSource-RSS.noarch 0:0.1.1-1.el5 se t to be updated ---> Package php-pear-Structures-DataGrid-Renderer-Pager.noarch 0:0.1.2-1.el5 se t to be updated ---> Package php-pear-Text-Diff.noarch 0:1.1.0-1.el5 set to be updated ---> Package php-pear-Validate.noarch 0:0.8.3-1.el5 set to be updated ---> Package php-pear-Validate-Finance-CreditCard.noarch 0:0.5.2-1.el5 set to be updated ---> Package php-pear-Var-Dump.noarch 0:1.0.3-2.el5 set to be updated ---> Package php-pear-XML-Beautifier.noarch 0:1.1-3.el5 set to be updated ---> Package php-pear-XML-Parser.noarch 0:1.2.8-1.el5 set to be updated ---> Package php-pear-XML-RSS.noarch 0:1.0.0-1.el5 set to be updated ---> Package php-pear-XML-Serializer.noarch 0:0.20.0-1.el5 set to be updated ---> Package php-pear-date.noarch 0:1.4.6-1.el5.rf set to be updated ---> Package php-pear-db.noarch 0:1.7.13-2.el5.rf set to be updated ---> Package php-pear-excel.noarch 0:0.9.0-1.el5.rf set to be updated ---> Package php-pear-file.noarch 0:1.2.2-1.el5.rf set to be updated ---> Package php-pear-log.noarch 0:1.9.3-1.el5.rf set to be updated ---> Package php-pear-mail_mime.noarch 0:1.3.1-1.el5.rf set to be updated ---> Package php-pear-ole.noarch 0:0.5-2.el5.rf set to be updated --> Running transaction check ---> Package graphviz.i386 0:2.22.0-4.el5.rf set to be updated ---> Package php-Smarty.noarch 0:2.6.26-1.el5 set to be updated ---> Package php-channel-phpunit.noarch 0:1.0-2.el5 set to be updated ---> Package php-domxml-php4-php5.noarch 0:1.21.2-1.el5 set to be updated ---> Package php-mcrypt.i386 0:5.2.9-2.el5.centos.3 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-mcrypt ---> Package php-pecl-radius.i386 0:1.2.5-4.el5 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-pecl-radius ---> Package php-pecl-xdebug.i386 0:2.0.5-1.el5.1 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-pecl-xdebug --> Finished Dependency Resolution php-pecl-xdebug-2.0.5-1.el5.1.i386 from epel has depsolving problems --> Missing Dependency: php-api = 20041225 is needed by package php-pecl-xdebu g-2.0.5-1.el5.1.i386 (epel) php-pecl-radius-1.2.5-4.el5.i386 from epel has depsolving problems --> Missing Dependency: php-api = 20041225 is needed by package php-pecl-radiu s-1.2.5-4.el5.i386 (epel) php-mcrypt-5.2.9-2.el5.centos.3.i386 from c5-testing has depsolving problems --> Missing Dependency: php-api = 20041225 is needed by package php-mcrypt-5.2 .9-2.el5.centos.3.i386 (c5-testing) Error: Missing Dependency: php-api = 20041225 is needed by package php-pecl-radi us-1.2.5-4.el5.i386 (epel) Error: Missing Dependency: php-api = 20041225 is needed by package php-mcrypt-5. 2.9-2.el5.centos.3.i386 (c5-testing) Error: Missing Dependency: php-api = 20041225 is needed by package php-pecl-xdeb ug-2.0.5-1.el5.1.i386 (epel) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package.

    Read the article

  • Logging Into a site that uses Live.com authentication with C#

    - by Josh
    I've been trying to automate a log in to a website I frequent, www.bungie.net. The site is associated with Microsoft and Xbox Live, and as such makes uses of the Windows Live ID API when people log in to their site. I am relatively new to creating web spiders/robots, and I worry that I'm misunderstanding some of the most basic concepts. I've simulated logins to other sites such as Facebook and Gmail, but live.com has given me nothing but trouble. Anyways, I've been using Wireshark and the Firefox addon Tamper Data to try and figure out what I need to post, and what cookies I need to include with my requests. As far as I know these are the steps one must follow to log in to this site. 1. Visit https: //login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917 2. Recieve the cookies MSPRequ and MSPOK. 3. Post the values from the form ID "PPSX", the values from the form ID "PPFT", your username, your password all to a changing URL similar to: https: //login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct= (there are a few numbers that change at the end of that URL) 4. Live.com returns the user a page with more hidden forms to post. The client then posts the values from the form "ANON", the value from the form "ANONExp" and the values from the form "t" to the URL: http ://www.bung ie.net/Default.aspx?wa=wsignin1.0 5. After posting that data, the user is returned a variety of cookies the most important of which is "BNGAuth" which is the log in cookie for the site. Where I am having trouble is on fifth step, but that doesn't neccesarily mean I've done all the other steps correctly. I post the data from "ANON", "ANONExp" and "t" but instead of being returned a BNGAuth cookie, I'm returned a cookie named "RSPMaybe" and redirected to the home page. When I review the Wireshark log, I noticed something that instantly stood out to me as different between the log when I logged in with Firefox and when my program ran. It could be nothing but I'll include the picture here for you to review. I'm being returned an HTTP packet from the site before I post the data in the fourth step. I'm not sure how this is happening, but it must be a side effect from something I'm doing wrong in the HTTPS steps. ![alt text][1] http://img391.imageshack.us/img391/6049/31394881.gif using System; using System.Collections.Generic; using System.Collections.Specialized; using System.Text; using System.Net; using System.IO; using System.IO.Compression; using System.Security.Cryptography; using System.Security.Cryptography.X509Certificates; using System.Web; namespace SpiderFromScratch { class Program { static void Main(string[] args) { CookieContainer cookies = new CookieContainer(); Uri url = new Uri("https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"); HttpWebRequest http = (HttpWebRequest)HttpWebRequest.Create(url); http.Timeout = 30000; http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.Referer = "http://www.bungie.net/"; http.ContentType = "application/x-www-form-urlencoded"; http.CookieContainer = new CookieContainer(); http.Method = WebRequestMethods.Http.Get; HttpWebResponse response = (HttpWebResponse)http.GetResponse(); StreamReader readStream = new StreamReader(response.GetResponseStream()); string HTML = readStream.ReadToEnd(); readStream.Close(); //gets the cookies (they are set in the eighth header) string[] strCookies = response.Headers.GetValues(8); response.Close(); string name, value; Cookie manualCookie; for (int i = 0; i < strCookies.Length; i++) { name = strCookies[i].Substring(0, strCookies[i].IndexOf("=")); value = strCookies[i].Substring(strCookies[i].IndexOf("=") + 1, strCookies[i].IndexOf(";") - strCookies[i].IndexOf("=") - 1); manualCookie = new Cookie(name, "\"" + value + "\""); Uri manualURL = new Uri("http://login.live.com"); http.CookieContainer.Add(manualURL, manualCookie); } //stores the cookies to be used later cookies = http.CookieContainer; //Get the PPSX value string PPSX = HTML.Remove(0, HTML.IndexOf("PPSX")); PPSX = PPSX.Remove(0, PPSX.IndexOf("value") + 7); PPSX = PPSX.Substring(0, PPSX.IndexOf("\"")); //Get this random PPFT value string PPFT = HTML.Remove(0, HTML.IndexOf("PPFT")); PPFT = PPFT.Remove(0, PPFT.IndexOf("value") + 7); PPFT = PPFT.Substring(0, PPFT.IndexOf("\"")); //Get the random URL you POST to string POSTURL = HTML.Remove(0, HTML.IndexOf("https://login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct=")); POSTURL = POSTURL.Substring(0, POSTURL.IndexOf("\"")); //POST with cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTURL); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.CookieContainer = cookies; http.Referer = "https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268158321&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"; http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; Stream ostream = http.GetRequestStream(); //used to convert strings into bytes System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding(); //Post information byte[] buffer = encoding.GetBytes("PPSX=" + PPSX +"&PwdPad=IfYouAreReadingThisYouHaveTooMuc&login=YOUREMAILGOESHERE&passwd=YOURWORDGOESHERE" + "&LoginOptions=2&PPFT=" + PPFT); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); HttpWebResponse response2 = (HttpWebResponse)http.GetResponse(); readStream = new StreamReader(response2.GetResponseStream()); HTML = readStream.ReadToEnd(); response2.Close(); ostream.Dispose(); foreach (Cookie cookie in response2.Cookies) { Console.WriteLine(cookie.Name + ": "); Console.WriteLine(cookie.Value); Console.WriteLine(cookie.Expires); Console.WriteLine(); } //SET POSTURL value string POSTANON = "http://www.bungie.net/Default.aspx?wa=wsignin1.0"; //Get the ANON value string ANON = HTML.Remove(0, HTML.IndexOf("ANON")); ANON = ANON.Remove(0, ANON.IndexOf("value") + 7); ANON = ANON.Substring(0, ANON.IndexOf("\"")); ANON = HttpUtility.UrlEncode(ANON); //Get the ANONExp value string ANONExp = HTML.Remove(0, HTML.IndexOf("ANONExp")); ANONExp = ANONExp.Remove(0, ANONExp.IndexOf("value") + 7); ANONExp = ANONExp.Substring(0, ANONExp.IndexOf("\"")); ANONExp = HttpUtility.UrlEncode(ANONExp); //Get the t value string t = HTML.Remove(0, HTML.IndexOf("id=\"t\"")); t = t.Remove(0, t.IndexOf("value") + 7); t = t.Substring(0, t.IndexOf("\"")); t = HttpUtility.UrlEncode(t); //POST the Info and Accept the Bungie Cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTANON); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Encoding", "gzip,deflate"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "115"); http.CookieContainer = new CookieContainer(); http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; http.Expect = null; ostream = http.GetRequestStream(); int test = ANON.Length; int test1 = ANONExp.Length; int test2 = t.Length; buffer = encoding.GetBytes("ANON=" + ANON +"&ANONExp=" + ANONExp + "&t=" + t); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); //Here lies the problem, I am not returned the correct cookies. HttpWebResponse response3 = (HttpWebResponse)http.GetResponse(); GZipStream gzip = new GZipStream(response3.GetResponseStream(), CompressionMode.Decompress); readStream = new StreamReader(gzip); HTML = readStream.ReadToEnd(); //gets both cookies string[] strCookies2 = response3.Headers.GetValues(11); response3.Close(); } } } This has given me problems and I've put many hours into learning about HTTP protocols so any help would be appreciated. If there is an article detailing a similar log in to live.com feel free to point the way. I've been looking far and wide for any articles with working solutions. If I could be clearer, feel free to ask as this is my first time using Stack Overflow. Cheers, --Josh

    Read the article

  • Logging Into a site that uses Live.com authentication

    - by Josh
    I've been trying to automate a log in to a website I frequent, www.bungie.net. The site is associated with Microsoft and Xbox Live, and as such makes uses of the Windows Live ID API when people log in to their site. I am relatively new to creating web spiders/robots, and I worry that I'm misunderstanding some of the most basic concepts. I've simulated logins to other sites such as Facebook and Gmail, but live.com has given me nothing but trouble. Anyways, I've been using Wireshark and the Firefox addon Tamper Data to try and figure out what I need to post, and what cookies I need to include with my requests. As far as I know these are the steps one must follow to log in to this site. 1. Visit https: //login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917 2. Recieve the cookies MSPRequ and MSPOK. 3. Post the values from the form ID "PPSX", the values from the form ID "PPFT", your username, your password all to a changing URL similar to: https: //login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct= (there are a few numbers that change at the end of that URL) 4. Live.com returns the user a page with more hidden forms to post. The client then posts the values from the form "ANON", the value from the form "ANONExp" and the values from the form "t" to the URL: http ://www.bung ie.net/Default.aspx?wa=wsignin1.0 5. After posting that data, the user is returned a variety of cookies the most important of which is "BNGAuth" which is the log in cookie for the site. Where I am having trouble is on fifth step, but that doesn't neccesarily mean I've done all the other steps correctly. I post the data from "ANON", "ANONExp" and "t" but instead of being returned a BNGAuth cookie, I'm returned a cookie named "RSPMaybe" and redirected to the home page. When I review the Wireshark log, I noticed something that instantly stood out to me as different between the log when I logged in with Firefox and when my program ran. It could be nothing but I'll include the picture here for you to review. I'm being returned an HTTP packet from the site before I post the data in the fourth step. I'm not sure how this is happening, but it must be a side effect from something I'm doing wrong in the HTTPS steps. using System; using System.Collections.Generic; using System.Collections.Specialized; using System.Text; using System.Net; using System.IO; using System.IO.Compression; using System.Security.Cryptography; using System.Security.Cryptography.X509Certificates; using System.Web; namespace SpiderFromScratch { class Program { static void Main(string[] args) { CookieContainer cookies = new CookieContainer(); Uri url = new Uri("https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268167141&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"); HttpWebRequest http = (HttpWebRequest)HttpWebRequest.Create(url); http.Timeout = 30000; http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.Referer = "http://www.bungie.net/"; http.ContentType = "application/x-www-form-urlencoded"; http.CookieContainer = new CookieContainer(); http.Method = WebRequestMethods.Http.Get; HttpWebResponse response = (HttpWebResponse)http.GetResponse(); StreamReader readStream = new StreamReader(response.GetResponseStream()); string HTML = readStream.ReadToEnd(); readStream.Close(); //gets the cookies (they are set in the eighth header) string[] strCookies = response.Headers.GetValues(8); response.Close(); string name, value; Cookie manualCookie; for (int i = 0; i < strCookies.Length; i++) { name = strCookies[i].Substring(0, strCookies[i].IndexOf("=")); value = strCookies[i].Substring(strCookies[i].IndexOf("=") + 1, strCookies[i].IndexOf(";") - strCookies[i].IndexOf("=") - 1); manualCookie = new Cookie(name, "\"" + value + "\""); Uri manualURL = new Uri("http://login.live.com"); http.CookieContainer.Add(manualURL, manualCookie); } //stores the cookies to be used later cookies = http.CookieContainer; //Get the PPSX value string PPSX = HTML.Remove(0, HTML.IndexOf("PPSX")); PPSX = PPSX.Remove(0, PPSX.IndexOf("value") + 7); PPSX = PPSX.Substring(0, PPSX.IndexOf("\"")); //Get this random PPFT value string PPFT = HTML.Remove(0, HTML.IndexOf("PPFT")); PPFT = PPFT.Remove(0, PPFT.IndexOf("value") + 7); PPFT = PPFT.Substring(0, PPFT.IndexOf("\"")); //Get the random URL you POST to string POSTURL = HTML.Remove(0, HTML.IndexOf("https://login.live.com/ppsecure/post.srf?wa=wsignin1.0&rpsnv=11&ct=")); POSTURL = POSTURL.Substring(0, POSTURL.IndexOf("\"")); //POST with cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTURL); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "300"); http.CookieContainer = cookies; http.Referer = "https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1268158321&rver=5.5.4177.0&wp=LBI&wreply=http:%2F%2Fwww.bungie.net%2FDefault.aspx&id=42917"; http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; Stream ostream = http.GetRequestStream(); //used to convert strings into bytes System.Text.ASCIIEncoding encoding = new System.Text.ASCIIEncoding(); //Post information byte[] buffer = encoding.GetBytes("PPSX=" + PPSX +"&PwdPad=IfYouAreReadingThisYouHaveTooMuc&login=YOUREMAILGOESHERE&passwd=YOURWORDGOESHERE" + "&LoginOptions=2&PPFT=" + PPFT); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); HttpWebResponse response2 = (HttpWebResponse)http.GetResponse(); readStream = new StreamReader(response2.GetResponseStream()); HTML = readStream.ReadToEnd(); response2.Close(); ostream.Dispose(); foreach (Cookie cookie in response2.Cookies) { Console.WriteLine(cookie.Name + ": "); Console.WriteLine(cookie.Value); Console.WriteLine(cookie.Expires); Console.WriteLine(); } //SET POSTURL value string POSTANON = "http://www.bungie.net/Default.aspx?wa=wsignin1.0"; //Get the ANON value string ANON = HTML.Remove(0, HTML.IndexOf("ANON")); ANON = ANON.Remove(0, ANON.IndexOf("value") + 7); ANON = ANON.Substring(0, ANON.IndexOf("\"")); ANON = HttpUtility.UrlEncode(ANON); //Get the ANONExp value string ANONExp = HTML.Remove(0, HTML.IndexOf("ANONExp")); ANONExp = ANONExp.Remove(0, ANONExp.IndexOf("value") + 7); ANONExp = ANONExp.Substring(0, ANONExp.IndexOf("\"")); ANONExp = HttpUtility.UrlEncode(ANONExp); //Get the t value string t = HTML.Remove(0, HTML.IndexOf("id=\"t\"")); t = t.Remove(0, t.IndexOf("value") + 7); t = t.Substring(0, t.IndexOf("\"")); t = HttpUtility.UrlEncode(t); //POST the Info and Accept the Bungie Cookies http = (HttpWebRequest)HttpWebRequest.Create(POSTANON); http.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)"; http.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"; http.Headers.Add("Accept-Language", "en-us,en;q=0.5"); http.Headers.Add("Accept-Encoding", "gzip,deflate"); http.Headers.Add("Accept-Charset", "ISO-8859-1,utf-8;q=0.7,*;q=0.7"); http.Headers.Add("Keep-Alive", "115"); http.CookieContainer = new CookieContainer(); http.ContentType = "application/x-www-form-urlencoded"; http.Method = WebRequestMethods.Http.Post; http.Expect = null; ostream = http.GetRequestStream(); int test = ANON.Length; int test1 = ANONExp.Length; int test2 = t.Length; buffer = encoding.GetBytes("ANON=" + ANON +"&ANONExp=" + ANONExp + "&t=" + t); ostream.Write(buffer, 0, buffer.Length); ostream.Close(); //Here lies the problem, I am not returned the correct cookies. HttpWebResponse response3 = (HttpWebResponse)http.GetResponse(); GZipStream gzip = new GZipStream(response3.GetResponseStream(), CompressionMode.Decompress); readStream = new StreamReader(gzip); HTML = readStream.ReadToEnd(); //gets both cookies string[] strCookies2 = response3.Headers.GetValues(11); response3.Close(); } } } This has given me problems and I've put many hours into learning about HTTP protocols so any help would be appreciated. If there is an article detailing a similar log in to live.com feel free to point the way. I've been looking far and wide for any articles with working solutions. If I could be clearer, feel free to ask as this is my first time using Stack Overflow.

    Read the article

< Previous Page | 18 19 20 21 22