Search Results

Search found 3018 results on 121 pages for 'plug'.

Page 22/121 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• Is it possible to "stealth" dual boot a machine?

  - by BrianH

  I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

  Read the article

• install grub on pendrive containing linux installation, making it system independent

  - by arpit

  i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

  Read the article

• Regarding the battery of a new laptop [closed]

  - by Majed

  Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

  Read the article

• assign auto static ip on ubuntu 10.04

  - by ronakin

  I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

  Read the article

• Laptop charger dying after plugging in?

  - by Corey

  My laptop charger's transformer has a green light on it that indicates that it's plugged in and working. When I plug it into the wall, the light goes on as expected. As soon as I plug it into the laptop, the light immediately turns off and my laptop doesn't get any charge. After that, the charger's light doesn't turn green again, even though it is still plugged into an outlet. I need to unplug it from the wall and wait a few minutes. It's strange - unplugging and immediately re-plugging it does not bring back the charge; I have to wait. Is this a charger issue or a laptop issue? Edit: Hooked the charger into a voltmeter and power went through fine. I guess this means that it's a short in my laptop itself. What are my options now?

  Read the article

• Windows Phone 8 not interfacing with Zune software

  - by Cyberherbalist

  I just got a Lumia 521 with Windows Phone 8 and am trying to get the device to work with the Zune software on my PC. I still have my Windows Phone 7 device, and the new one is not working the same way. When I plug the WP7 device into the PC's USB port, it automatically fires up Zune and I can sync my podcasts and music etc to the device. But when I plug the Lumia into the PC it doesn't fire up Zune, and if I start Zune manually, it doesn't interface with the phone at all. Perhaps I am missing something and WP8 isn't supposed to use Zune to interface with the phone?

  Read the article

• Distributed Nagios Installation

  - by kruczkowski

  I'm looking for a plug-in or product that will act as a remote probe and perform tests then send back the results to the central Nagios server. Reason for this is that I'd like to monitor internal systems and servers at customers, but don't want to allow all the traffic passing the firewalls. Ideally I'd like a soft-probe that would be installed and then perform the tests and send back the results (via SSH) to the central Nagios installation. Does anyone know of a product or plug-in that would offer such service? If not Nagios, is there any other monitoring system that does such a thing (ideally open-source)?

  Read the article

• HP Probook 6550b has issues with an external monitor

  - by chama

  I recently got a new HP Probook 6550b laptop for work. However, very often, when left alone (not put to sleep), the built in display will go dark. Not only that, but whenever I plug in an external monitor, the display will blank out as well. Sometimes after this happens, putting the laptop to sleep and then waking it up solves the problem. But only sometimes and only for a short time. The next time I plug in my monitor, it happens again. I know this isn't only my problem - 6 other people got the same laptop as I have at the same time, and we're all having such issues. Any suggestions as to the root of this problem and a way to fix it? It's driving me crazy!

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• Web application design with distributed servers

  - by Bonn

  I want to build a web application/server with this structure: main-server sub-server transaction-server (create, update, delete) view-server (view, search) authentication-server documents-server reporting-server library-server e-learning-server The main-server acts as host server for sub-server. I can add many sub-servers and connect it to main-server (via plug-play interface maybe), then it can begin querying data from another sub-servers (which has been connected to the main-server). The sub-servers can be anywhere as long as connected to internet. The main-server can manage all sub-servers which are connected to it (query data, setting permission between sub-servers, etc). The purpose is simple, the web application will be huge as the company grows, so I want to distribute it into small connected plug-able servers. My question is, does the structure above already have a standardized method? or are there any different views? what are the technologies needed? I need a lot of researches before the execution plan begin. thanks a lot.

  Read the article

• Is there a method to export the URLs of the open tabs of a Firefox window?

  - by hekevintran

  If I have a Firefox window open that contains 10 tabs, is there a way in Firefox or by a plug-in to get the URLs of those 10 tabs as a text file or some other format? Right now if I want to do this I need to copy the URL of tab A, paste it somewhere, move to tab B, and repeat. I could also bookmark all the tabs into a folder and export that, but that seems like such a hassle. If there is no such method, could someone point me to some documents that describe the basics of writing a Firefox plug-in. I am willing to write this myself if there is no "standard" way.

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• Using a 3g usb dongle as Cisco router access point

  - by beakersoft

  We have an office opening, and we aren't going to have comms into the building when management want the building to open. Our only option (I think) Is to try and hook up a 3/4g dongle to something to act as the access point, and send all the traffic via that. The model of router we use wont support the usb dongle, so we need some sort of 'bridge' My idea was to build a Linux box, plug the dongle into that and then via the Ethernet ports plug the router in. We need the Cisco router in the equation as we create VPN connections over that back to head office. My question is will this work?

  Read the article

• What's the best scenario for using a wireless router with Comcast Business Class

  - by Buck

  Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

  Read the article

• Is it safe to operate a laptop without battery?

  - by leladax

  I know it's 'unsafe' in terms of data loss but I noticed motherboards still have some of their circuits on power when they are plugged in [e.g. a circuit that must wait for power-on signals is certainly one of them]. Hence, I wondered if it would increase the life of the laptop if the battery was simply off. Let alone that may also increase battery life, but that's the least of my concerns. Notice the main point is to plug it off on hibernate and have no power source whatsoever for the duration of being off (apart from the clock battery). (i.e. saving having to plug off the battery every time)

  Read the article

• How can I view a PDF in Firefox when the server specifies the wrong content type?

  - by Sam

  I am using Mozilla Firefox with a PDF viewer plug-in. The plug-in has been correctly associated with Adobe Reader files to view them in the browser in the settings. I would like to be able to view PDF files in Firefox rather than downloading them. This already works correctly when a web server indicates that a file has the Content-Type of application/pdf. However, some web servers provide other Content-Types for PDFs, such as application/octet-stream. (See this example of a PDF served with a non-pdf Content-Type.) I have looked at Firefox's MimeTypes.rdf file, and it appears to only support mapping applications based on file types for non-Internet-based files. How can I have Firefox view all PDF documents in-browser rather than only the ones with the application/pdf Content-Type?

  Read the article

• Is my Power Supply Unit fried?

  - by Rob

  So my laptop just started smoking where I plug my charger in. I run a netbook, the Acer Aspire One. My charger won't charge it, because when I plug my charger into the netbook, the charging light that indicates the netbook is receiving power turns off. Is there anything I can do to troubleshoot where the problem is and what should I do now? Is just my charger fried and should I replace it. Or could there also be a problem with my netbook and do I need to look for other problems?

  Read the article

• Windows 7 keeps losing drive letters

  - by Dean Perry

  Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• Odd SVN Checkout failures occur frequenctly on VMWare virtual machines

  - by snowballhg

  We've recently been experiencing seemingly random SVN checkout failures on our Hudson build system. Google search has failed me; I'm hoping the super user community can help me out :-) We are occasionally receiving the following SVN error when our Hudson build jobs checkout source via the Hudson Subversion plug-in (which uses svn kit): ERROR: Failed to check out http://server/svnroot/trunk org.tmatesoft.svn.core.SVNException: svn: Processing REPORT request response failed: XML document structures must start and end within the same entity. (/svnroot/!svn/vcc/default) svn: REPORT request failed on '/svnroot/!svn/vcc/default' This issue seems to only occur when checking out from our Virtual Machines (Windows XP, Fedora 9, Fedora 12) using Hudson's SVN Plug-in. Systems that use the traditional SVN client seem to work. SVN Server version: 1.6.6 Hudson version: 1.377 Hudson SVN Plugin Version: 1.17 Has anyone dealt with this issue, or have any suggestions? Thanks

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >