Search Results

Search found 3096 results on 124 pages for 'scope creep'.

Page 22/124 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• Search Display Controller Crashes When Returning Results

  - by Convolution

  I have a tableview with a search display controller. It has been working fine in the past, but recently has started crashing for certain search results. Here my code searches a Golfer based on their Name, Age and Handicap. The data is correctly loaded into the table, I can access and drill down to receive further information. However when I type in a search query for either Name or Age, the app crashes, while the Golfers Handicap is returned fine. Note: dataSouceArray is the data source for the tableview, dataSourceArrayCopy is the mutable copy of the data used to add and remove objects in the search filter. - (void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope { /* Update the filtered array based on the search text and scope. */ [self.dataSourceArrayCopy removeAllObjects]; // First clear the filtered array. /* Search the main list for products whose type matches the scope (if selected) and whose name matches searchText; add items that match to the filtered array. */ for (Golfer *golfer in dataSourceArray) { if ([scope isEqualToString:@"Name"] || [golfer.golferName isEqualToString:scope]) { NSComparisonResult result = [golfer.golferName compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.customerListCopy addObject:golfer]; } } if ([scope isEqualToString:@"Age"] || [golfer.golferAge isEqualToString:scope]) { NSComparisonResult result = [golfer.golferAge compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.dataSourceArrayCopy addObject:golfer]; } } if ([scope isEqualToString:@"Handicap"] || [golfer.golferHandicap isEqualToString:scope]) { NSComparisonResult result = [golfer.golferHandicap compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.dataSourceArrayCopy addObject:golfer]; } } } } - (BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString { [self filterContentForSearchText:searchString scope: [[self.searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:[self.searchDisplayController.searchBar selectedScopeButtonIndex]]]; // Return YES to cause the search result table view to be reloaded. return YES; } - (BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchScope:(NSInteger)searchOption { [self filterContentForSearchText:[self.searchDisplayController.searchBar text] scope: [[self.searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:searchOption]]; // Return YES to cause the search result table view to be reloaded. return YES; } Any help would be appreciated, thank you for taking the time to read this.

  Read the article

• ClassCastException happens when I use maven with tomcat plugin

  - by zjffdu

  Hi all, I try to use maven with tomcat plugin to develop a simple web application. But When I invoke the servlet, ClassCastException happens, this is the error message: java.lang.ClassCastException: "com.snda.dw.moniter.LogQueryServlet cannot be to javax.servlet.Servlet" But I already make com.snda.dw.moniter.LogQueryServlet extends HttpServlet, it should can be cast to avax.servlet.Servlet. The following is my pom.xml http://maven.apache.org/maven-v4_0_0.xsd" 4.0.0 com.snda dw.moniter war 0.0.1-SNAPSHOT dw.moniter Maven Webapp http://maven.apache.org junit junit 3.8.1 test <dependency> <groupId>javax.servlet</groupId> <artifactId>servlet-api</artifactId> <version>2.4</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.servlet.jsp</groupId> <artifactId>jsp-api</artifactId> <version>2.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>com.google.guava</groupId> <artifactId>guava</artifactId> <version>r07</version> <type>jar</type> <scope>compile</scope> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-api</artifactId> <version>1.6.1</version> <type>jar</type> <scope>compile</scope> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-simple</artifactId> <version>1.6.1</version> <type>jar</type> <scope>compile</scope> </dependency> <dependency> <groupId>org.apache.hadoop</groupId> <artifactId>hadoop-core</artifactId> <version>0.20.2</version> <type>jar</type> <scope>compile</scope> </dependency> <dependency> <groupId>com.snda</groupId> <artifactId>dw.common</artifactId> <version>1.0-SNAPSHOT</version> <type>jar</type> <scope>compile</scope> </dependency> <dependency> <groupId>net.sf.flexjson</groupId> <artifactId>flexjson</artifactId> <version>2.1</version> <type>jar</type> <scope>compile</scope> </dependency> </dependencies> <build> <finalName>dw.moniter</finalName> <pluginManagement> <plugins> <plugin> <artifactId>maven-compiler-plugin</artifactId> <configuration> <source>1.5</source> <target>1.5</target> </configuration> </plugin> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>tomcat-maven-plugin</artifactId> <version>1.1</version> </plugin> <plugin> <groupId>org.mortbay.jetty</groupId> <artifactId>jetty-maven-plugin</artifactId> <version>8.0.0.M2</version> </plugin> </plugins> </pluginManagement> </build>

  Read the article

• When designing a job queue, what should determine the scope of a job?

  - by Stuart Pegg

  We've got a job queue system that'll cheerfully process any kind of job given to it. We intend to use it to process jobs that each contain 2 tasks: Job (Pass information from one server to another) Fetch task (get the data, slowly) Send task (send the data, comparatively quickly) The difficulty we're having is that we don't know whether to break the tasks into separate jobs, or process the job in one go. Are there any best practices or useful references on this subject? Is there some obvious benefit to a method that we're missing? So far we can see these benefits for each method: Split Job lease length reflects job length: Rather than total of two Finer granularity on recovery: If we lose outgoing connectivity we can tell them all to retry The starting state of the second task is saved to job history: Helps with debugging (although similar logging could be added in single task method) Single Single job to be scheduled: Less processing overhead Data not stale on recovery: If the outgoing downtime is quite long, the pending Send jobs could be outdated

  Read the article

• IPv6 host route is deleted after PMTU expires

  - by SAPikachu

  I am experimenting my new IPv6 tunnel setup between my local Ubuntu box and a scratch Linode. I set up some docker containers, configured 6in4 tunnel server and IPv6 forwarding on the Linode: # uname -a Linux argo 3.15.4-x86_64-linode45 #1 SMP Mon Jul 7 08:42:36 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux # ip addr .. snipped .. 48: sit-sapikachu: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1472 qdisc noqueue state UNKNOWN group default link/sit 106.185.41.115 peer 1.2.3.4 inet6 fd00::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::6ab9:2973/64 scope link valid_lft forever preferred_lft forever 13: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether 56:84:7a:fe:97:99 brd ff:ff:ff:ff:ff:ff inet 172.17.42.1/16 scope global docker0 valid_lft forever preferred_lft forever inet6 fc00::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::5484:7aff:fefe:9799/64 scope link valid_lft forever preferred_lft forever // Docker containers are bridged to docker0 On my local box, I configured a 6in4 tunnel interface to connect to the Linode box, and added a host route to one of the docker container: # uname -a Linux sapikachu-netbox 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # ip addr .. snipped .. 16: sit-argo: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default link/sit 0.0.0.0 peer 106.185.41.115 inet6 fd00::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::a97:302/64 scope link valid_lft forever preferred_lft forever inet6 fe80::ac19:1/64 scope link valid_lft forever preferred_lft forever inet6 fe80::c0a8:1f0/64 scope link valid_lft forever preferred_lft forever inet6 fe80::c0a8:1fa/64 scope link valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether *** brd ff:ff:ff:ff:ff:ff .. snipped .. inet6 fd00:0:1::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::2e0:6fff:fe0e:365e/64 scope link valid_lft forever preferred_lft forever # ip route replace fc00::1875:8606:d8c1:8a9d via fd00::1 # Add route to docker container # ip -6 route .. snipped unrelated routes fc00::1875:8606:d8c1:8a9d via fd00::1 dev sit-argo metric 1024 expires 590sec mtu 1472 fd00::/64 dev sit-argo proto kernel metric 256 fd00:0:1::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sit-argo proto kernel metric 256 (Note that tunnel MTU on my local box is different from the server, this is intentional for testing) After adding the host route to the docker container (fc00::1875:8606:d8c1:8a9d), I can ping the container without problem until the route expires. After that I couldn't get reply any more. If I run ip -6 route in a few seconds after expiration, expiration time of the host route will be a negative number: fc00::1875:8606:d8c1:8a9d via fd00::1 dev sit-argo metric 1024 expires -1sec And output of ip route get fc00::1875:8606:d8c1:8a9d shows that it is routed to my default IPv6 gateway (which fails to route it correctly of course, since the address is not globally routable). After some time, the host route disappears without a trace. This problem won't happen if I do either one of the following things: Set MTU of tunnel on my local box to be the same as the server (1472). The route won't have expiration time in both ip -6 route and ip route get in this case. Instead of adding a host route, add a route with network mask (even /127 works). In this case ip -6 route shows the route without expiration time, ip route get shows expiration time but it will be correctly refreshed after expiration. Although this problem can be easily resolved, I am curious to know why this happens. Is there error in my configuration, or is this a kernel bug?

  Read the article

• How broken is routing strategy that causes a martian packet (so far only) during tracepath?

  - by lkraav

  I believe I've achieved a table that routes packets from and to eth1/192.168.3.x through 192.168.3.1, and packets from and to eth0/192.168.1.x through 192.168.1.1 (helpful source). Question: when doing tracepath from 192.168.3.20 (from within vserver), I'm getting kernel: [318535.927489] martian source 192.168.3.20 from 212.47.223.33, on dev eth0 at or near the target IP, while intermediary hops go without (log below). I don't understand why this packet is arriving on eth0, instead of eth1, even after reading this: Note that you may see packets from non-routable IP addresses when running the traceroute or tracepath commands. While packets cannot be routed to these routers, packets sent between 2 routers only need to know the address of the next hop within the local networks, which could be a non-routable address. Can someone explain that paragraph in human language? Based on short initial trials so far, everything else seems to work without causing martians. Is this contained to the nature of tracepath operation or do I have some other bigger routing problem that will cause work traffic breakage? Side note: is it possible to inspect martian packet with tcpdump or wireshark or anything of the sort? I'm have not been able to get it to show up on my own. vserver-20 / # tracepath -n 212.47.223.33 1: 192.168.3.2 0.064ms pmtu 1500 1: 192.168.3.1 1.076ms 1: 192.168.3.1 1.259ms 2: 90.191.8.2 1.908ms 3: 90.190.134.194 2.595ms 4: 194.126.123.94 2.136ms asymm 5 5: 195.250.170.22 2.266ms asymm 6 6: 212.47.201.86 2.390ms asymm 7 7: no reply 8: no reply 9: no reply ^C Host routing: $ sudo ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:24:1d:de:b3:5d brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 scope global eth0 4: eth1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:46:46:a3:6a brd ff:ff:ff:ff:ff:ff inet 192.168.3.2/27 scope global eth1 inet 192.168.3.20/27 brd 192.168.3.31 scope global secondary eth1 # linux-vserver instance $ sudo ip route default via 192.168.1.1 dev eth0 metric 3 unreachable 127.0.0.0/8 scope host 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2 192.168.3.0/27 dev eth1 proto kernel scope link src 192.168.3.2 $ sudo ip rule 0: from all lookup local 32764: from all to 192.168.3.0/27 lookup dmz 32765: from 192.168.3.0/27 lookup dmz 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table dmz default via 192.168.3.1 dev eth1 metric 4 192.168.3.0/27 dev eth1 scope link metric 4 Gateway routing # ip route 10.24.0.2 dev tun0 proto kernel scope link src 10.24.0.1 10.24.0.0/24 via 10.24.0.2 dev tun0 192.168.3.0/24 dev br-dmz proto kernel scope link src 192.168.3.1 192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1 $ISP_NET/23 dev eth0.1 proto kernel scope link src $WAN_IP default via $ISP_GW dev eth0.1 Additional background Options for non-virtualized network interface isolation?

  Read the article

• Where can I find a library that parses source code and is able to extract the scope of where your cursor is currently in the code?

  - by Anthony

  In SublimeText(2), when you press [ctrl + shift + p] (mac osx) you are shown a scope of where your caret/cursor is in the source code at the given moment e.g.: entity.name.tag.inline.any.html meta.tag.inline.any.html text.html.basic I am curious about what library or script is used to parse the document/file and create that scope string. A sidenote: Typing view.syntax_name(view.sel()[0].b) into Sublime's console will output the scope as well.

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• C#: How do you manage symbolic constants in your projects? Where do you declare solution scope cons

  - by odiseh

  How do you manage symbolic constants in your projects? Where do you declare solution scope constants ?

  Read the article

• When Debugging in Xcode what does "out of scope" mean?

  - by Buffernet

  I'm in xcode debugging my iphone application. when i get to a break point and I roll over my object and properties of that object say "out of scope" instead of their respective values. Here's what I do: I have inited a view with nib name (initwithnibname). Then set the property of that view to the object that I want. I have placed the breakpoint in the viewwillappear method. I rollover my reference to the variable that was is my property. All properties in the object say "out of scope" Does anyone know why this is happening?

  Read the article

• The SharePoint Search Dropdown shows only This site as the scope.

  - by Mac

  Hi All, I have a team site in which the Search scope dropdown only shows This site and it doesn't show All Sites and People in the dropdown.Any one knows why? I have not enabled Custom scopes in Search settings for this site because I don't have Search Center created. If I create search center and specify as a custom scope in this site I can see all 3 scopes in the dropdown. I am just trying to understand whether I need to have Search Center created to have all these shared scopes getting displayed in the Search Scopes drop down?

  Read the article

• In a web site, Where do you declare project-scope enums ?

  - by odiseh

  Hi all In an asp.net web site project, Where do you declare project-scope enums ?

  Read the article

• Turn Based Event Algorithm

  - by GamersIncoming

  I'm currently working on a small roguelike in XNA, which sees the player in a randomly generated series of dungeons fending off creeps, as you might expect. As with most roguelikes, the player makes a move, and then each of the creeps currently active on screen will make a move in turns, until all creeps have updated, and it return's to the player's go. On paper, the simple algorithm is straightforward: Player takes turn Turn Number increments For each active creep, update Position Once all active creeps have updated, allow player to take next turn However, when it comes to actually writing this in more detail, the concept becomes a bit more tricky for me. So my question comes as this: what is the best way to handle events taking turns to trigger, where the completion of each last event triggers the next, when dealing with a large number of creeps (probably stored as an array of an enemy object), and is there an easier way to create some kind of engine that just takes all objects that need updating and chains them together so their updates follow suit? I'm not asking for code, just algorithms and theory in the direction of objects triggering updates one after the other, in a turn based manner. Thanks in advance. Edited: Here's the code I currently have that is horrible :/ if (player.getTurnOver() && updateWait == 0) { if (creep[creepToUpdate].getActive()) { creep[creepToUpdate].moveObject(player, map1); updateWait = 10; } if (creepToUpdate < creep.Length -1) { creepToUpdate++; } else { creepToUpdate = 0; player.setTurnOver(false); } } if (updateWait > 0) { updateWait--; }

  Read the article

• Unable to build my c++ code with g++ 4.6.3

  - by Mriganka

  I am facing multiple issues with building my c++ code on Ubuntu 12.04. This code was building and running fine on RH Enterprise. I am using g++ 4.6.3. Here's the output of g++ -v. g++ -v Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.6/lto-wrapper Target: i686-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Here's a sample of my code: #include "Word.h" #include < string> using namespace std; pthread_mutex_t Word::_lock = PTHREAD_MUTEX_INITIALIZER; Word::Word(): _occurrences(1) { memset(_buf, 0, 25); } Word::Word(char *str): _occurrences(1) { memset(_buf, 0, 25); if (str != NULL) { strncpy(_buf, str, strlen(str)); } } g++ -c -ansi or g++ -c -std=c++98 or g++ -c -std=c++03, none of these options are able to build the code correctly. I get the following compilation errors: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o Word.cpp: In constructor ‘Word::Word()’: Word.cpp:10:21: error: ‘memset’ was not declared in this scope Word.cpp: In constructor ‘Word::Word(char*)’: Word.cpp:16:21: error: ‘memset’ was not declared in this scope Word.cpp:19:34: error: ‘strlen’ was not declared in this scope Word.cpp:19:35: error: ‘strncpy’ was not declared in this scope Word.cpp: In member function ‘void Word::operator=(const Word&)’: Word.cpp:37:42: error: ‘strlen’ was not declared in this scope Word.cpp:37:43: error: ‘strncpy’ was not declared in this scope Word.cpp: In copy constructor ‘Word::Word(const Word&)’: Word.cpp:44:21: error: ‘memset’ was not declared in this scope Word.cpp:45:52: error: ‘strlen’ was not declared in this scope Word.cpp:45:53: error: ‘strncpy’ was not declared in this scope So basically g++ 4.6.3 on Ubuntu 12.04 is not able to recognize the standard c++ headers. And I am not finding a way out of this situation. Second problem: In order to make progress, I included < string.h instead of < string. But now I am facing linking errors with my message queue and pthread library functions. Here's the error that I am getting: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o g++ -lrt -I/usr/lib/i386-linux-gnu Word.o HashMap.o main.o -o word_count main.o: In function `main': /home/mriganka/WordCount/main.cpp:75: undefined reference to `pthread_create' /home/mriganka/WordCount/main.cpp:90: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:93: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:113: undefined reference to `mq_send' /home/mriganka/WordCount/main.cpp:123: undefined reference to `pthread_join' /home/mriganka/WordCount/main.cpp:129: undefined reference to `mq_close' /home/mriganka/WordCount/main.cpp:130: undefined reference to `mq_unlink' main.o: In function `count_words(void*)': /home/mriganka/WordCount/main.cpp:151: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:154: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:162: undefined reference to `mq_timedreceive' collect2: ld returned 1 exit status Here's my makefile: CC=g++ CFLAGS=-c -g -ansi LDFLAGS=-lrt INC=-I/usr/lib/i386-linux-gnu SOURCES=Word.cpp HashMap.cpp main.cpp OBJECTS=$(SOURCES:.cpp=.o) EXECUTABLE=word_count all: $(SOURCES) $(EXECUTABLE) $(EXECUTABLE): $(OBJECTS) $(CC) $(LDFLAGS) $(INC) -pthread $(OBJECTS) -o $@ .cpp.o: $(CC) $(CFLAGS) $< -o $@ clean: rm -f *.o word_count Please help me to resolve both the issues. I searched online relentlessly for any solution of these problems, but no one seems to have encountered these issues.

  Read the article

• iptables advanced routing

  - by Shamanu4

  I have a Centos server acting as a NAT in my network. This server has one external (later ext1) interface and three internal (later int1, int2 and int3). Egress traffic comes from users via int1 and after MASQUERADE goes via ext1. Ingress traffic comes from ext1, MASQUERADE, and goes via int2 or int3 according to static routes. | ext1 | x.x.x.x/24 +---------|----------------------+ | | | Centos server (NAT) | | | +---|------|---------------|-----+ | | | int1 | | int2 | int3 10.30.1.10/24 | | 10.30.2.10/24 | 10.30.3.10/24 ^ v v 10.30.1.1/24 | | 10.30.2.1/24 | 10.30.3.1/24 +---|------|---------------|-----+ | | | | | | | v v | | ^ -Traffic policer- | | |_____________ | | | | | +------------------|-------------+ | 192.168.0.1/16 | | Clients 192.168.0.0/16 The problem: Egress traffic seems to be dropped after PREROUTING table. Packet counters are not changing on MASQUERADE rule in POSTROUTING. If I change the routes to clients causing the traffic go back via int1 - everything works perfectly. current iptable configuration is very simple: # cat /etc/sysconfig/iptables *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -I INPUT 1 -i int1 -j ACCEPT -A FORWARD -j ACCEPT COMMIT *nat -A POSTROUTING -o ext1 -j MASQUERADE # COMMIT Can anyone point me what I'm missing? Thanks. UPDATE: 192.168.100.60 via 10.30.2.1 dev int2 proto zebra # routes to clients ... 192.168.100.61 via 10.30.3.1 dev int3 proto zebra # ... I have a lot of them x.x.x.0/24 dev ext1 proto kernel scope link src x.x.x.x 10.30.1.0/24 dev int1 proto kernel scope link src 10.30.1.10 10.30.2.0/24 dev int2 proto kernel scope link src 10.30.2.10 10.30.3.0/24 dev int3 proto kernel scope link src 10.30.3.10 169.254.0.0/16 dev ext1 scope link metric 1003 169.254.0.0/16 dev int1 scope link metric 1004 169.254.0.0/16 dev int2 scope link metric 1005 169.254.0.0/16 dev int3 scope link metric 1006 blackhole 192.168.0.0/16 default via x.x.x.y dev ext1 Clients have 192.168.0.1 as gateway, which is redirecting them to 10.30.1.1

  Read the article

• Compiling a Windows C++ program in g++

  - by Phenom

  I'm trying to compile a Windows C++ program in g++. This is what I get. /usr/include/c++/4.4/backward/backward_warning.h:28:2: warning: #warning This file includes at least one deprecated or antiquated header which may be removed without further notice at a future date. Please use a non-deprecated interface with equivalent functionality instead. For a listing of replacement headers and interfaces, consult the file backward_warning.h. To disable this warning use -Wno-deprecated. btree.cpp:1204: error: ‘_TCHAR’ has not been declared btree.cpp: In function ‘int _tmain(int, int**)’: btree.cpp:1218: error: ‘__int64’ was not declared in this scope btree.cpp:1218: error: expected ‘;’ before ‘frequency’ btree.cpp:1220: error: ‘LARGE_INTEGER’ was not declared in this scope btree.cpp:1220: error: expected primary-expression before ‘)’ token btree.cpp:1220: error: ‘frequency’ was not declared in this scope btree.cpp:1220: error: ‘QueryPerformanceFrequency’ was not declared in this scope btree.cpp:1262: error: expected primary-expression before ‘)’ token btree.cpp:1262: error: ‘start’ was not declared in this scope btree.cpp:1262: error: ‘QueryPerformanceCounter’ was not declared in this scope btree.cpp:1264: error: name lookup of ‘i’ changed for ISO ‘for’ scoping btree.cpp:1264: note: (if you use ‘-fpermissive’ G++ will accept your code) btree.cpp:1304: error: expected primary-expression before ‘)’ token btree.cpp:1304: error: ‘end’ was not declared in this scope btree.cpp:1306: error: ‘total’ was not declared in this scope btree.cpp:1316: error: ‘getchar’ was not declared in this scope The first thing I noticed is that there are these variable types called _TCHAR, _int64, and LARGE_INTEGER, which is probably a Windows thing. What can these be changed to so that they will work in g++? Also, if there's anything else in here that you know can be converted to g++, that would be helpful. I got the code from here: http://touc.org/btree.html

  Read the article

• Can't get network bridging to work

  - by Antonis Christofides

  I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

  Read the article

• What is the scope of CONTEXT_INFO in SQL Server?

  - by JasonS

  I am using CONTEXT_INFO to pass a username to a delete trigger for the purposes of an audit/history table. I'm trying to understand the scope of CONTEXT_INFO and if I am creating a potential race condition. Each of my database tables has a stored proc to handle deletes. The delete stored proc takes userId as an parameter, and sets CONTEXT_INFO to the userId. My delete trigger then grabs the CONTEXT_INFO and uses that to update an audit table that indicates who deleted the row(s). The question is, if two deletes sprocs from different users are executing at the same time, can CONTEXT_INFO set in one of the sprocs be consumed by the trigger fired by the other sproc? I've seen this article http://msdn.microsoft.com/en-us/library/ms189252.aspx but I'm not clear on the scope of sessions and batches in SQL Server which is key to the article being helpful! I'd post code, but short on time at the moment. I'll edit later if this isn't clear enough. Thanks in advance for any help.

  Read the article

• PHPUnit and autoloaders: Determining whether code is running in test-scope?

  - by pinkgothic

  Premise I know that writing code to act differently when a test is run is hilariously bad practise, but I may've actually come across a scenario in which it may be necessary. Specifically, I'm trying to test a very specific wrapper for HTML Purifier in the Zend framework - a View Helper, to be exact. The HTML Purifier autoloader is necessary because it uses a different logic to the autoloaders we otherwise have. Problem require()-ing the autoloader at the top of my View Helper class, gives me the following in test-scope: HTML Purifier autoloader registrar is not compatible with non-static object methods due to PHP Bug #44144; Please do not use HTMLPurifier.autoload.php (or any file that includes this file); instead, place the code: spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) after your own autoloaders. Replacing the require() with spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) as advertised means the test runs fine, but the View Helper dies a terrible death claiming: Zend_Log[3707]: ErrorController caught LogicException "Passed array does not specify an existing static method (class 'HTMLPurifier_Bootstrap' not found)" (Our test folder structure is slightly different to our Zend folder structure by necessity.) Question(s) After tinkering with it, I'm thinking I'll need to pick an autoloader-loading depending on whether things are in the test scope or not. Do I have another option to include HTMLPurifier's autoloading routine in both cases that I'm not seeing due to tunnel vision? If not, do I have to find a means to differentiate between test-environment and production-environment this with my own code (e.g. APPLICATION_ENV) - or does PHPUnit support this godawful hackery of mine natively by setting a constant that I could check whether its been defined(), or similar shenanigans? (My Google-fu here is weak! I'm probably just doing it wrong.)

  Read the article

• Is it necessary to var scope loop variables in CFScript?

  - by Mel

  When using CFML and CF9 I usually var scope my loop variables; in this case local.i, for example: <cfloop list="#this.list#" index="local.i"> <cfif Len(local.i) GT 10> // do something </cfif> </cfloop> I recently started converting some stuff into CFScript, and (to my disappointment I found out that there is no way to loop over a list in CFScript) I'm wondering if I should still var scope my loop variables, and how: for (i = 1; LTE ListLen(this.list); i = i + 1 ) { if (Len(ListGetAt(this.list, i) GT 10)) { // do something } } Should I be doing local.i = 1 and local.i = local.i + 1 istead of the sample code in my example? Is it necessary? EDIT: I should also ask if the CFScript form of my CFML loop is correct; I ask because I just noticed that my CFML loop uses a , (comma and space) for the delimiter argument, which seems non-existence in the CFScript version of the loop.

  Read the article

• In Rails, how to respect :scope when using validates_uniqueness_of in an embedded object form?

  - by mkirk

  I have a Book model, which has_many Chapters (which belong_to a Book). I want to ensure uniqueness of Chapter titles, but only within the scope of a single book. The catch is that the form for creating chapters is embedded in the Book model's form (The Book model accepts_nested_attributes_for :chapters). Within the Chapter model: validates_uniqueness_of( :chapter_title, :scope = :book_id, :case_sensitive = false, :message = "No book can have multiple chapters with the same title.") However, when I submit the Book creation form (which also includes multiple embedded Chapter forms), if the chapter title exists in another chapter for a different book, I fail the validation test. Book.create( :chapters => [ Chapter.new(:title => "Introduction"), Chapter.new(:title => "How to build things") => Book 1 successfully created Book.create( :chapters => [ Chapter.new(:title => "Introduction"), Chapter.new(:title => "Destroy things") => Book 2 fails to validate second_book = Book.create( :chapters => [ Chapter.new(:title => "A temporary Introduction title"), Chapter.new(:title => "Destroy things") => Book 2 succesfully created second_book.chapters[0].title= "Introduction" => success second_book.chapters.save => success second_book.save => success Can anyone shed some light on how to do this? Or why it's happening?

  Read the article

• Troubleshoot Perl module installation on Mac OS X

  - by Daniel Standage

  I'm trying to install the Perl module Set::IntervalTree on Mac OS X. I recently installed it today on an Ubuntu box with no problem. I simply started cpan, entered install Set:IntervalTree, and it all worked out. However, the installation failed on Mac OS X--it spits out a huge list of compiler errors (below). How would I troubleshoot this. I don't even know where to begin. cpan[1]> install Set::IntervalTree CPAN: Storable loaded ok (v2.18) Going to read /Users/standage/.cpan/Metadata Database was generated on Fri, 14 Jan 2011 02:58:42 GMT CPAN: YAML loaded ok (v0.72) Going to read /Users/standage/.cpan/build/ ............................................................................DONE Found 1 old build, restored the state of 1 Running install for module 'Set::IntervalTree' Running make for B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz CPAN: Digest::SHA loaded ok (v5.45) CPAN: Compress::Zlib loaded ok (v2.008) Checksum for /Users/standage/.cpan/sources/authors/id/B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz ok Scanning cache /Users/standage/.cpan/build for sizes ............................................................................DONE x Set-IntervalTree-0.01/ x Set-IntervalTree-0.01/src/ x Set-IntervalTree-0.01/src/Makefile x Set-IntervalTree-0.01/src/interval_tree.h x Set-IntervalTree-0.01/src/test_main.cc x Set-IntervalTree-0.01/lib/ x Set-IntervalTree-0.01/lib/Set/ x Set-IntervalTree-0.01/lib/Set/IntervalTree.pm x Set-IntervalTree-0.01/Changes x Set-IntervalTree-0.01/MANIFEST x Set-IntervalTree-0.01/t/ x Set-IntervalTree-0.01/t/Set-IntervalTree.t x Set-IntervalTree-0.01/typemap x Set-IntervalTree-0.01/perlobject.map x Set-IntervalTree-0.01/IntervalTree.xs x Set-IntervalTree-0.01/Makefile.PL x Set-IntervalTree-0.01/README x Set-IntervalTree-0.01/META.yml CPAN: File::Temp loaded ok (v0.18) CPAN.pm: Going to build B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Set::IntervalTree cp lib/Set/IntervalTree.pm blib/lib/Set/IntervalTree.pm AutoSplitting blib/lib/Set/IntervalTree.pm (blib/lib/auto/Set/IntervalTree) /usr/bin/perl /System/Library/Perl/5.10.0/ExtUtils/xsubpp -C++ -typemap /System/Library/Perl/5.10.0/ExtUtils/typemap -typemap perlobject.map -typemap typemap IntervalTree.xs > IntervalTree.xsc && mv IntervalTree.xsc IntervalTree.c g++ -c -Isrc -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -g -O0 -DVERSION=\"0.01\" -DXS_VERSION=\"0.01\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" -Isrc IntervalTree.c In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4420:40: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4467:34: error: macro "do_close" requires 2 arguments, but only 1 given /usr/include/c++/4.2.1/bits/locale_facets.h:4486:55: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4513:23: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:58:38: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67:71: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78:39: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: ‘do_open’ declared as a ‘virtual’ field /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: expected ‘;’ before ‘const’ /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: variable or field ‘do_close’ declared void /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: expected ‘;’ before ‘const’ In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67: error: expected initializer before ‘const’ /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78: error: expected initializer before ‘const’ In file included from IntervalTree.xs:19: src/interval_tree.h:95: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:95: error: expected a type, got ‘IntervalTree<T,N>::it_recursion_node’ src/interval_tree.h:95: error: template argument 2 is invalid src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree()’: src/interval_tree.h:130: error: expected type-specifier src/interval_tree.h:130: error: expected `;' src/interval_tree.h:135: error: expected type-specifier src/interval_tree.h:135: error: expected `;' src/interval_tree.h:141: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:178: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:240: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:298: error: ‘x’ was not declared in this scope src/interval_tree.h:299: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N)’: src/interval_tree.h:375: error: ‘y’ was not declared in this scope src/interval_tree.h:376: error: ‘x’ was not declared in this scope src/interval_tree.h:377: error: ‘newNode’ was not declared in this scope src/interval_tree.h:379: error: expected type-specifier src/interval_tree.h:379: error: expected `;' src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetSuccessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:450: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetPredecessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:483: error: ‘y’ was not declared in this scope src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree()’: src/interval_tree.h:546: error: ‘x’ was not declared in this scope src/interval_tree.h:547: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:547: error: expected a type, got ‘(IntervalTree<T,N>::Node * <expression error>)’ src/interval_tree.h:547: error: template argument 2 is invalid src/interval_tree.h:547: error: invalid type in declaration before ‘;’ token src/interval_tree.h:551: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:554: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:557: error: request for member ‘empty’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:558: error: request for member ‘back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:559: error: request for member ‘pop_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:561: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:564: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::DeleteFixUp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:613: error: ‘w’ was not declared in this scope src/interval_tree.h:614: error: ‘rootLeft’ was not declared in this scope src/interval_tree.h: In member function ‘T IntervalTree<T, N>::remove(IntervalTree<T, N>::Node*)’: src/interval_tree.h:697: error: ‘y’ was not declared in this scope src/interval_tree.h:698: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N)’: src/interval_tree.h:819: error: ‘x’ was not declared in this scope src/interval_tree.h:833: error: invalid types ‘int[size_t]’ for array subscript src/interval_tree.h:836: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:837: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:838: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:839: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:840: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:846: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:847: error: expected `;' before ‘back’ src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:57: instantiated from here src/interval_tree.h:375: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:375: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:376: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:376: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:377: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:377: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:65: instantiated from here src/interval_tree.h:819: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:819: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant IntervalTree.xs:65: instantiated from here src/interval_tree.h:847: error: dependent-name ‘IntervalTree<T,N>::it_recursion_node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:847: note: say ‘typename IntervalTree<T,N>::it_recursion_node’ if a type is meant src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:205: instantiated from here src/interval_tree.h:546: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:546: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:380: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:298: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:298: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:299: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:299: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:395: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:178: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:178: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:399: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:240: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:240: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant lipo: can't open input file: /var/tmp//ccLthuaw.out (No such file or directory) make: *** [IntervalTree.o] Error 1 BENBOOTH/Set-IntervalTree-0.01.tar.gz make -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible Failed during this command: BENBOOTH/Set-IntervalTree-0.01.tar.gz : make NO

  Read the article

• Are JSF 2.x ViewScoped Beans Thread Safe?

  - by Mark

  I've been googling for a couple hours on this issue to no eval. WELD docs and the CDI spec are pretty clear regarding thread safety of the scopes provided. For example: Application Scope - not safe Session Scope - not safe Request Scope - safe, always bound to a single thread Conversation Scope - safe (due to the WELD proxy serializing access from multiple request threads) I can't find anything on the View Scope defined by JSF 2.x. It is in roughly the same bucket as the Conversation Scope in that it is very possible for multiple requests to hit the scope concurrently despite it being bound to a single view / user. What I don't know is if the JSF implementation serializes access to the bean from multiple requests. Anyone have knowledge of the spec or of the Morraja/MyFaces implementations that could clear this up?

  Read the article

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• using google account for authentication: how to set the scope parameter?

  - by powerboy

  I tried to use google account for authentication for my web application. My web application does not use any google service after authentication succeeds. Then how to set the "scope" parameter?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >