Search Results

Search found 615 results on 25 pages for 'stat'.

Page 22/25 | < Previous Page | 18 19 20 21 22 23 24 25  | Next Page >

  • Xcache - No different after using it

    - by Charles Yeung
    Hi I have installed Xcache in my site(using xampp), I have tested more then 10 times on several page and the result is same as default(no any cache installed), is it something wrong with the configure? Updated [xcache-common] ;; install as zend extension (recommended), normally "$extension_dir/xcache.so" zend_extension = /usr/local/lib/php/extensions/non-debug-non-zts-xxx/xcache.so zend_extension_ts = /usr/local/lib/php/extensions/non-debug-zts-xxx/xcache.so ;; For windows users, replace xcache.so with php_xcache.dll zend_extension_ts = C:\xampp\php\ext\php_xcache.dll ;; or install as extension, make sure your extension_dir setting is correct ; extension = xcache.so ;; or win32: ; extension = php_xcache.dll [xcache.admin] xcache.admin.enable_auth = On xcache.admin.user = "mOo" ; xcache.admin.pass = md5($your_password) xcache.admin.pass = "" [xcache] ; ini only settings, all the values here is default unless explained ; select low level shm/allocator scheme implemenation xcache.shm_scheme = "mmap" ; to disable: xcache.size=0 ; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows xcache.size = 60M ; set to cpu count (cat /proc/cpuinfo |grep -c processor) xcache.count = 1 ; just a hash hints, you can always store count(items) > slots xcache.slots = 8K ; ttl of the cache item, 0=forever xcache.ttl = 0 ; interval of gc scanning expired items, 0=no scan, other values is in seconds xcache.gc_interval = 0 ; same as aboves but for variable cache xcache.var_size = 4M xcache.var_count = 1 xcache.var_slots = 8K ; default ttl xcache.var_ttl = 0 xcache.var_maxttl = 0 xcache.var_gc_interval = 300 xcache.test = Off ; N/A for /dev/zero xcache.readonly_protection = Off ; for *nix, xcache.mmap_path is a file path, not directory. ; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection ; 2 group of php won't share the same /tmp/xcache ; for win32, xcache.mmap_path=anonymous map name, not file path xcache.mmap_path = "/dev/zero" ; leave it blank(disabled) or "/tmp/phpcore/" ; make sure it's writable by php (without checking open_basedir) xcache.coredump_directory = "" ; per request settings xcache.cacher = On xcache.stat = On xcache.optimizer = Off [xcache.coverager] ; per request settings ; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean() functions (will hurt executing performance) xcache.coverager = Off ; ini only settings ; make sure it's readable (care open_basedir) by coverage viewer script ; requires xcache.coverager=On xcache.coveragedump_directory = "" Thanks you

    Read the article

  • Asp.net MVC appliction showing popup message after updating user

    - by kumar
    This is my Update Json method.. public JsonResult Update(StudentInfo e) { var cache = CacheFactory.GetCacheManager(); var Status= false; for (int i = 0; i <= cache.Count; i++) { var x = (StudentInfo )cache.GetData("a" + i); if (x != null) { Status= common.UpdateStudent(e.Student); } } return Json(Status); } this is my veiw.. <% using (Html.BeginForm("Update", "home", FormMethod.Post)) { %> <%= Html.ValidationSummary(true)%> my scripts.. <script type="text/javascript"> $(document).ready(function() { $('#btnSelectAll').click(function() { $('#btnSelect').click(function() { $('#input[type=checkbox]').attr('checked', 'checked'); }); function validate_excpt(formData, jqForm, options) { var form = jqForm[0]; return true; } // post-submit callback function showResponse(responseText, statusText, xhr, $form) { if (responseText[0].substring(0, 16) != "System.Exception") { $('#error-msg- span:last').html('<strong>Update successful.</strong>'); } else { $('#error-msg- span:last').html('<strong>Update failed.</strong> ' + responseText[0].substring(0, 48)); } $('#error-msg-').removeClass('hide'); $('#gui-stat-').html(responseText[1]); } // post-submit callback $('#exc-').ajaxForm({ target: '#error-msg-', beforeSubmit: validate_excpt, success: showResponse, dataType: 'json' }); $('.button').button(); }); $('.button').button(); $("input[id^='exc-flwup-']").datepicker({ duration: '', showTime: true, constrainInput: true, stepMinutes: 30, stepHours: 1, altTimeField: '', time24h: true, minDate: 0 }); $('#ui-timepicker-div').bgiframe(); }); </script> I am getting popupmessage when Jsonresult Update method has done..but I am seeing that user is updating perfectly.. popup window saying something like you have choosed to open if I open that I am getting string as True in the file.. is that above code I am doing something wrong?

    Read the article

  • xerces-c: Xml parsing multiple files

    - by user459811
    I'm atempting to learn xerces-c and was following this tutorial online. http://www.yolinux.com/TUTORIALS/XML-Xerces-C.html I was able to get the tutorial to compile and run through a memory checker (valgrind) with no problems however when I made alterations to the program slightly, the memory checker returned some potential leak bytes. I only added a few extra lines to main to allow the program to read two files instead of one. int main() { string configFile="sample.xml"; // stat file. Get ambigious segfault otherwise. GetConfig appConfig; appConfig.readConfigFile(configFile); cout << "Application option A=" << appConfig.getOptionA() << endl; cout << "Application option B=" << appConfig.getOptionB() << endl; // Added code configFile = "sample1.xml"; appConfig.readConfigFile(configFile); cout << "Application option A=" << appConfig.getOptionA() << endl; cout << "Application option B=" << appConfig.getOptionB() << endl; return 0; } I was wondering why is it when I added the extra lines of code to read in another xml file, it would result in the following output? ==776== Using Valgrind-3.6.0 and LibVEX; rerun with -h for copyright info ==776== Command: ./a.out ==776== Application option A=10 Application option B=24 Application option A=30 Application option B=40 ==776== ==776== HEAP SUMMARY: ==776== in use at exit: 6 bytes in 2 blocks ==776== total heap usage: 4,031 allocs, 4,029 frees, 1,092,045 bytes allocated ==776== ==776== 3 bytes in 1 blocks are definitely lost in loss record 1 of 2 ==776== at 0x4C28B8C: operator new(unsigned long) (vg_replace_malloc.c:261) ==776== by 0x5225E9B: xercesc_3_1::MemoryManagerImpl::allocate(unsigned long) (MemoryManagerImpl.cpp:40) ==776== by 0x53006C8: xercesc_3_1::IconvGNULCPTranscoder::transcode(unsigned short const*, xercesc_3_1::MemoryManager*) (IconvGNUTransService.cpp:751) ==776== by 0x4038E7: GetConfig::readConfigFile(std::string&) (in /home/bonniehan/workspace/test/a.out) ==776== by 0x403B13: main (in /home/bonniehan/workspace/test/a.out) ==776== ==776== 3 bytes in 1 blocks are definitely lost in loss record 2 of 2 ==776== at 0x4C28B8C: operator new(unsigned long) (vg_replace_malloc.c:261) ==776== by 0x5225E9B: xercesc_3_1::MemoryManagerImpl::allocate(unsigned long) (MemoryManagerImpl.cpp:40) ==776== by 0x53006C8: xercesc_3_1::IconvGNULCPTranscoder::transcode(unsigned short const*, xercesc_3_1::MemoryManager*) (IconvGNUTransService.cpp:751) ==776== by 0x40393F: GetConfig::readConfigFile(std::string&) (in /home/bonniehan/workspace/test/a.out) ==776== by 0x403B13: main (in /home/bonniehan/workspace/test/a.out) ==776== ==776== LEAK SUMMARY: ==776== definitely lost: 6 bytes in 2 blocks ==776== indirectly lost: 0 bytes in 0 blocks ==776== possibly lost: 0 bytes in 0 blocks ==776== still reachable: 0 bytes in 0 blocks ==776== suppressed: 0 bytes in 0 blocks ==776== ==776== For counts of detected and suppressed errors, rerun with: -v ==776== ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 2 from 2)

    Read the article

  • flickr.photos.search strange behavior with nested xml response

    - by JohnIdol
    I am querying flickr with the following request: view-source:http://www.flickr.com/services/rest/?method=flickr.photos.search&api_key=MY_KEY&text=cork&per_page=12&&format=rest if I put the above url in the browser I get the following as I would expect: <rsp stat="ok"> <photos page="1" pages="22661" perpage="12" total="271924"> <photo id="4587565363" owner="46277999@N05" secret="717118838d" server="4029" farm="5" title="06052010(001)" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587466773" owner="25901874@N06" secret="32c5a1a57f" server="4002" farm="5" title="black wine cork 2 BW" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4588084730" owner="25901874@N06" secret="b27eef5635" server="4032" farm="5" title="black wine cork 2" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587457789" owner="43115275@N00" secret="ae0daa0ab6" server="4034" farm="5" title="Matthew" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587443837" owner="49967920@N07" secret="2b4c1a58de" server="4066" farm="5" title="Two car garage" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4588050906" owner="45827769@N06" secret="72de138f7e" server="4067" farm="5" title="Dabie Mountains, Central China" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587979300" owner="36531359@N00" secret="e5f8b30734" server="3299" farm="4" title="stroll" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587304769" owner="7904649@N02" secret="995062f550" server="4034" farm="5" title="IMG_4325" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587306827" owner="7904649@N02" secret="b92d7ff916" server="4050" farm="5" title="IMG_4329" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587311657" owner="7904649@N02" secret="bb1b34ccf8" server="4053" farm="5" title="IMG_4336" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587933110" owner="7904649@N02" secret="f733b1d482" server="3300" farm="4" title="IMG_4334" ispublic="1" isfriend="0" isfamily="0" /> <photo id="4587930650" owner="7904649@N02" secret="9bc202b3ed" server="4018" farm="5" title="IMG_4331" ispublic="1" isfriend="0" isfamily="0" /> </photos> </rsp> Now I've got something very simple PHP to query the exact same url, called from javascript through AJAX - it all works as I can see putting a breakpoint in my javascript function that handles the response: function HandleResponse(response) { document.getElementById('ResponseDiv').innerHTML = response; } Looking at response value in the snippet above I see what I expect (xml formed as above) - then the strangest thing happens: when I inspect the DOM instead of having photo elements all as children of photos they're all nested within each other. What amI missing - How is this possible in light of the fact that the response string is definitely formed as I would expect it to be?

    Read the article

  • node.js callback getting unexpected value for variable

    - by defrex
    I have a for loop, and inside it a variable is assigned with var. Also inside the loop a method is called which requires a callback. Inside the callback function I'm using the variable from the loop. I would expect that it's value, inside the callback function, would be the same as it was outside the callback during that iteration of the loop. However, it always seems to be the value from the last iteration of the loop. Am I misunderstanding scope in JavaScript, or is there something else wrong? The program in question here is a node.js app that will monitor a working directory for changes and restart the server when it finds one. I'll include all of the code for the curious, but the important bit is the parse_file_list function. var posix = require('posix'); var sys = require('sys'); var server; var child_js_file = process.ARGV[2]; var current_dir = __filename.split('/'); current_dir = current_dir.slice(0, current_dir.length-1).join('/'); var start_server = function(){ server = process.createChildProcess('node', [child_js_file]); server.addListener("output", function(data){sys.puts(data);}); }; var restart_server = function(){ sys.puts('change discovered, restarting server'); server.close(); start_server(); }; var parse_file_list = function(dir, files){ for (var i=0;i<files.length;i++){ var file = dir+'/'+files[i]; sys.puts('file assigned: '+file); posix.stat(file).addCallback(function(stats){ sys.puts('stats returned: '+file); if (stats.isDirectory()) posix.readdir(file).addCallback(function(files){ parse_file_list(file, files); }); else if (stats.isFile()) process.watchFile(file, restart_server); }); } }; posix.readdir(current_dir).addCallback(function(files){ parse_file_list(current_dir, files); }); start_server(); The output from this is: file assigned: /home/defrex/code/node/ejs.js file assigned: /home/defrex/code/node/templates file assigned: /home/defrex/code/node/web file assigned: /home/defrex/code/node/server.js file assigned: /home/defrex/code/node/settings.js file assigned: /home/defrex/code/node/apps file assigned: /home/defrex/code/node/dev_server.js file assigned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js stats returned: /home/defrex/code/node/main_urls.js For those from the future: node.devserver.js

    Read the article

  • problem with fifos linux

    - by nunos
    I am having problem debugging why n_bytes in read_from_fifo function in client.c doesn't correspond to the value written to the fifo. It should only write 25 bytes but it tries to read a lot more (1836020505 bytes (!) to be exact). Any idea why this is happening? server.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <errno.h> #include <unistd.h> #include <fcntl.h> #include <sys/wait.h> #include <signal.h> #include <pthread.h> #include <sys/stat.h> typedef enum { false, true } bool; //first read the int with the number of bytes the data will have //then read that number of bytes bool read_from_fifo(int fd, char* var) { int n_bytes; if (read(fd, &n_bytes, sizeof(int))) { printf("going to read %d bytes\n", n_bytes); if (read(fd, var, n_bytes)) printf("read var\n"); else { printf("error in read var. errno: %d\n", errno); exit(-1); } } return true; } int main() { mkfifo("/tmp/foo", 0660); int fd = open("/tmp/foo", O_RDONLY); char var[100]; read_from_fifo(fd, var); printf("var: %s\n", var); return 0; } client.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <errno.h> #include <unistd.h> #include <fcntl.h> typedef enum { false, true } bool; //first write to fd a int with the number of bytes that will be written afterwards bool write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)) * sizeof(char); printf("going to write %d bytes\n", n_bytes); if (write(fd, &n_bytes, sizeof(int) != -1)) if (write(fd, data, n_bytes) != -1) return true; return false; } int main() { int fd = open("/tmp/foo", O_WRONLY); char data[] = "some random string abcdef"; write_to_fifo(fd, data); return 0; } Help is greatly appreciated. Thanks in advance.

    Read the article

  • Correlation formula explanation needed d3.js

    - by divakar
    function getCorrelation(xArray, yArray) { alert(xArray); alert(yArray); function sum(m, v) {return m + v;} function sumSquares(m, v) {return m + v * v;} function filterNaN(m, v, i) {isNaN(v) ? null : m.push(i); return m;} // clean the data (because we know that some values are missing) var xNaN = _.reduce(xArray, filterNaN , []); var yNaN = _.reduce(yArray, filterNaN , []); var include = _.intersection(xNaN, yNaN); var fX = _.map(include, function(d) {return xArray[d];}); var fY = _.map(include, function(d) {return yArray[d];}); var sumX = _.reduce(fX, sum, 0); var sumY = _.reduce(fY, sum, 0); var sumX2 = _.reduce(fX, sumSquares, 0); var sumY2 = _.reduce(fY, sumSquares, 0); var sumXY = _.reduce(fX, function(m, v, i) {return m + v * fY[i];}, 0); var n = fX.length; var ntor = ( ( sumXY ) - ( sumX * sumY / n) ); var dtorX = sumX2 - ( sumX * sumX / n); var dtorY = sumY2 - ( sumY * sumY / n); var r = ntor / (Math.sqrt( dtorX * dtorY )); // Pearson ( http://www.stat.wmich.edu/s216/book/node122.html ) var m = ntor / dtorX; // y = mx + b var b = ( sumY - m * sumX ) / n; // console.log(r, m, b); return {r: r, m: m, b: b}; } I have finding correlation between the points i plot using this function which is not written by me. my xarray=[120,110,130,132,120,118,134,105,120,0,0,0,0,137,125,120,127,120,160,120,148] yarray=[80,70,70,80,70,62,69,70,70,62,90,42,80,72,0,0,0,0,78,82,68,60,58,82,60,76,86,82,70] I can t able to understand the function perfectly. Can anybody explain it with the data i pasted here. I also wanted to remove the zeros getting calculated from this function.

    Read the article

  • What the best approach to iterate and "store" files over a directory in C (Linux) ?

    - by Andrei Ciobanu
    I have written a function that checks if to files are duplicates or not. This function signature is: int check_dup_memmap(char *f1_name, char *f2_name) It returns: (-1) - If something went wrong; (0) - If the two files are similar; (+1) - If the two files are different; The next step is to write a function that iterates through all the files in a certain directory,apply the previous function, and gives a report on every existing duplicates. Initially I've thought to write a function that generates a file with all the filenames in a certain directory and then, read that file again and gain and compare every two files. Here is that version of the function, that gets all the filenames in a certain directory. void *build_dir_tree(char *dirname, FILE *f) { DIR *cdir = NULL; struct dirent *ent = NULL; struct stat buf; if(f == NULL){ fprintf(stderr, "NULL file submitted. [build_dir_tree].\n"); exit(-1); } if(dirname == NULL){ fprintf(stderr, "NULL dirname submitted. [build_dir_tree].\n"); exit(-1); } if((cdir = opendir(dirname)) == NULL){ char emsg[MFILE_LEN]; sprintf(emsg, "Cannot open dir: %s [build_dir_tree]\t",dirname); perror(emsg); } chdir(dirname); while ((ent = readdir(cdir)) != NULL) { lstat(ent->d_name, &buf); if (S_ISDIR(buf.st_mode)) { if (strcmp(".", ent->d_name) == 0 || strcmp("..", ent->d_name) == 0) { continue; } build_dir_tree(ent->d_name, f); } else{ fprintf(f, "/%s/%s\n",util_get_cwd(),ent->d_name); } } chdir(".."); closedir(cdir); } Still I consider this approach a little inefficient, as I have to parse the file again and again. In your opinion what are other approaches should I follow: Write a datastructure and hold the files instead of writing them in the file ? I think for a directory with a lot of files, the memory will become very fragmented. Hold all the filenames in auto-expanding array, so that I can easy access every file by their index, because they will in a contiguous memory location. Map this file in memory using mmap() ? But mmap may fail, as the file gets to big. Any opinions on this. I want to choose the most efficient path, and access as few resources as possible. This is the requirement of the program... EDIT: Is there a way to get the numbers of files in a certain directory, without iterating through it ?

    Read the article

  • Which work process in my company should I Improve first?

    - by shoren
    I've just started to work in a new place, and I see several things they do that I find really terrible, and I want to know if they are indeed so wrong, or I am just too strict. Please let me know if my criticism is in place, and your opinion on which problem is the worst and should be fixed first. The developement is all in Java. 1) Not using svnignore. This means svn stat can't be used, and developers forget to add files and break the build. 2) Generated files go to same folders as committed files. Can't use simple maven clean, have to find them one by one. Maven clean doesn't remove all of them. 3) Not fixing IDE analyze warnings. Analyze code returns about 5,000 warning, of many different kinds. 4) Not following conventions: spring beans names sometimes start with uppercase and sometimes not, ant properties sometimes with underline and sometimes with dots delimiter, etc. 5) Incremental build takes 6 minutes, even when nothing is changed. 6) Developers only use remote debug, and don't know how to run the Tomcat server internally from the IDE. 7) Developers always restart the server after every compilation, instead of dynamically reloading the class and saving the server's state. It takes them at least 10 minutes to start checking any change in the code. 8) Developers only compile from command line. When there are compilation errors, they manually open the file and go the the problematic line. 9) A complete mess in project dependencies. Over 200 open sources are depended on, and no one knows what is indeed needed and why. They do know that not all dependencies are necessary. 10) Mixing Maven and Ant in a way that disables the benefits of both. In one case, even dependency checks are not done by Maven. 11) Not using generics properly. 12) Developers don't use Subversion integration with IDE (Eclipse, Intellij Idea). What do you think? Where should I start? Is any of the things I mentioned not really a problem?

    Read the article

  • postfix with mailman

    - by Thufir
    What should happen is that [email protected] should be delivered to that users inbox on localhost, user@localhost. Thunderbird works fine at reading user@localhost. I'm just using a small portion of postfix-dovecot with Ubuntu mailman. How can I get postfix to recognize the FQDN and deliver them to a localhost inbox? root@dur:~# root@dur:~# tail /var/log/mail.err;tail /var/log/mailman/subscribe;postconf -n Aug 27 18:59:16 dur dovecot: lda(root): Error: chdir(/root) failed: Permission denied Aug 27 18:59:16 dur dovecot: lda(root): Error: user root: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/root/Maildir) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Aug 27 18:59:16 dur dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information. Aug 27 20:09:16 dur postfix/trivial-rewrite[15896]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 21:19:17 dur postfix/trivial-rewrite[16569]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 22:27:00 dur postfix[17042]: fatal: usage: postfix [-c config_dir] [-Dv] command Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 22:59:07 dur postfix/postfix-script[17459]: error: unknown command: 'restart' Aug 27 22:59:07 dur postfix/postfix-script[17460]: fatal: usage: postfix start (or stop, reload, abort, flush, check, status, set-permissions, upgrade-configuration) Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 21:39:03 2012 (16734) cola: pending "[email protected]" <[email protected]> 127.0.0.1 Aug 27 21:40:37 2012 (16749) cola: pending "[email protected]" <[email protected]> 127.0.0.1 Aug 27 22:45:31 2012 (17288) gmane.mail.mailman.user.1: pending [email protected] 127.0.0.1 Aug 27 22:45:46 2012 (17293) gmane.mail.mailman.user.1: pending [email protected] 127.0.0.1 Aug 27 23:02:01 2012 (17588) test3: pending [email protected] 127.0.0.1 Aug 27 23:05:41 2012 (17652) test4: pending [email protected] 127.0.0.1 Aug 27 23:56:20 2012 (17985) test5: pending [email protected] 127.0.0.1 alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# there's definitely a transport problem: root@dur:~# root@dur:~# root@dur:~# grep transport /var/log/mail.log | tail Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: warning: hash:/etc/postfix/transport lookup error for "[email protected]" Aug 27 22:29:19 dur postfix/trivial-rewrite[17062]: warning: transport_maps lookup failure Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: error: open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "*" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "*" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: hash:/etc/postfix/transport lookup error for "[email protected]" Aug 27 23:39:17 dur postfix/trivial-rewrite[17794]: warning: transport_maps lookup failure root@dur:~# trying to add the transport file: EDIT root@dur:~# root@dur:~# touch /etc/postfix/transport root@dur:~# ll /etc/postfix/transport -rw-r--r-- 1 root root 0 Aug 28 00:16 /etc/postfix/transport root@dur:~# root@dur:~# cd /etc/postfix/ root@dur:/etc/postfix# root@dur:/etc/postfix# postmap transport root@dur:/etc/postfix# root@dur:/etc/postfix# cat transport

    Read the article

  • High apache load but little traffic logged

    - by nrambeck
    I recently installed Varnish to sit in front of Apache on a dedicated server running a single site. It appears to be working well, but the load on Apache is still very high. What doesn't make sense is that the Apache access log shows almost no traffic getting past Varnish. When I tail the apache log I see about 1-3 hits per second come through. Here is what the load on Apache looks like : USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND apache 13834 8.1 1.0 107716 34164 ? S 08:24 0:02 /usr/sbin/httpd apache 13835 8.1 1.0 107716 33856 ? S 08:24 0:02 /usr/sbin/httpd apache 11483 7.9 0.9 105916 30788 ? S 08:23 0:06 /usr/sbin/httpd apache 12255 7.5 1.0 107476 33312 ? S 08:24 0:04 /usr/sbin/httpd apache 9340 7.2 1.1 107732 34916 ? R 08:23 0:09 /usr/sbin/httpd apache 12029 6.8 0.9 106908 30416 ? S 08:24 0:04 /usr/sbin/httpd apache 11577 6.7 1.0 107192 34180 ? S 08:24 0:05 /usr/sbin/httpd apache 11486 6.6 1.0 106176 33112 ? S 08:23 0:05 /usr/sbin/httpd apache 11796 6.4 1.0 106936 31916 ? S 08:24 0:04 /usr/sbin/httpd apache 13815 6.3 1.0 107988 34464 ? S 08:24 0:02 /usr/sbin/httpd apache 18089 6.3 1.3 107444 43212 ? S 08:11 0:52 /usr/sbin/httpd apache 11797 5.9 1.0 107716 34580 ? S 08:24 0:04 /usr/sbin/httpd apache 7655 5.9 0.0 0 0 ? Z 08:22 0:09 [httpd] <defunct> mysql 8033 5.9 6.2 318240 199512 ? Sl May14 352:34 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/va apache 11488 5.8 0.9 106924 31632 ? S 08:23 0:04 /usr/sbin/httpd apache 9375 5.7 1.1 106956 35552 ? S 08:23 0:07 /usr/sbin/httpd apache 3551 5.6 1.1 106956 36140 ? S 08:20 0:14 /usr/sbin/httpd apache 7657 5.6 1.0 106968 32472 ? S 08:22 0:09 /usr/sbin/httpd apache 11433 5.6 1.0 107716 34396 ? S 08:23 0:04 /usr/sbin/httpd apache 5505 5.5 1.1 106944 34924 ? S 08:21 0:12 /usr/sbin/httpd apache 7172 5.3 1.1 106972 35368 ? S 08:22 0:09 /usr/sbin/httpd apache 10088 5.2 0.9 106160 31240 ? S 08:23 0:04 /usr/sbin/httpd apache 7656 5.1 1.0 106436 34388 ? S 08:22 0:08 /usr/sbin/httpd apache 3468 5.0 1.1 107716 35968 ? S 08:20 0:13 /usr/sbin/httpd apache 14242 4.8 1.0 107728 33032 ? S 08:25 0:00 /usr/sbin/httpd apache 3578 4.8 1.1 107988 35964 ? S 08:20 0:12 /usr/sbin/httpd apache 28192 4.8 1.2 106944 38060 ? S 08:17 0:23 /usr/sbin/httpd apache 3277 4.6 1.1 106956 35688 ? S 08:20 0:13 /usr/sbin/httpd apache 15434 3.7 0.7 106908 24684 ? S 08:25 0:00 /usr/sbin/httpd There is a default apache log and then one other VirtualHost log setup. I'm concerned that Apache is handling some kind of traffic that is not being logged. Is that possible? And is there anything I can do to capture that traffic?

    Read the article

  • Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

    - by digitaltoast
    I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

    Read the article

  • Users loggin to 3Com switches authenticated by radius not getting admin priv and no access available

    - by 3D1L
    Hi, Following the setup that I have for my Cisco devices, I got some basic level of functionality authenticating users that loggin to 3Com switches authenticated against a RADIUS server. Problem is that I can not get the user to obtain admin privileges. I'm using Microsoft's IAS service. According to 3Com documentation when configuring the access policy on IAS the value of 010600000003 have to be used to specify admin access level. That value have to be input in the Dial-in profile section: 010600000003 - indicates admin privileges 010600000002 - manager 010600000001 - monitor 010600000000 - visitor Here is the configuration on the switch: radius scheme system server-type standard primary authentication XXX.XXX.XXX.XXX accounting optional key authentication XXXXXX key accounting XXXXXX domain system scheme radius-scheme system local-user admin service-type ssh telnet terminal level 3 local-user manager service-type ssh telnet terminal level 2 local-user monitor service-type ssh telnet terminal level 1 The configuration is working with the IAS server because I can check user login events with the Eventviewer tool. Here is the output of the DISPLAY RADIUS command at the switch: [4500]disp radius SchemeName =system Index=0 Type=standard Primary Auth IP =XXX.XXX.XXX.XXX Port=1645 State=active Primary Acct IP =127.0.0.1 Port=1646 State=active Second Auth IP =0.0.0.0 Port=1812 State=block Second Acct IP =0.0.0.0 Port=1813 State=block Auth Server Encryption Key= XXXXXX Acct Server Encryption Key= XXXXXX Accounting method = optional TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12 Permitted send realtime PKT failed counts =5 Retry sending times of noresponse acct-stop-PKT =500 Quiet-interval(min) =5 Username format =without-domain Data flow unit =Byte Packet unit =1 Total 1 RADIUS scheme(s). 1 listed Here is the output of the DISPLAY DOMAIN and DISPLAY CONNECTION commands after users log into the switch: [4500]display domain 0 Domain = system State = Active RADIUS Scheme = system Access-limit = Disable Domain User Template: Idle-cut = Disable Self-service = Disable Messenger Time = Disable Default Domain Name: system Total 1 domain(s).1 listed. [4500]display connection Index=0 ,Username=admin@system IP=0.0.0.0 Index=2 ,Username=user@system IP=xxx.xxx.xxx.xxx On Unit 1:Total 2 connections matched, 2 listed. Total 2 connections matched, 2 listed. [4500] Here is the DISP RADIUS STATISTICS: [4500] %Apr 2 00:23:39:957 2000 4500 SHELL/5/LOGIN:- 1 - ecajigas(xxx.xxx.xxx.xxx) in un it1 logindisp radius stat state statistic(total=1048): DEAD=1046 AuthProc=0 AuthSucc=0 AcctStart=0 RLTSend=0 RLTWait=2 AcctStop=0 OnLine=2 Stop=0 StateErr=0 Received and Sent packets statistic: Unit 1........................................ Sent PKT total :4 Received PKT total:1 Resend Times Resend total 1 1 2 1 Total 2 RADIUS received packets statistic: Code= 2,Num=1 ,Err=0 Code= 3,Num=0 ,Err=0 Code= 5,Num=0 ,Err=0 Code=11,Num=0 ,Err=0 Running statistic: RADIUS received messages statistic: Normal auth request , Num=1 , Err=0 , Succ=1 EAP auth request , Num=0 , Err=0 , Succ=0 Account request , Num=1 , Err=0 , Succ=1 Account off request , Num=0 , Err=0 , Succ=0 PKT auth timeout , Num=0 , Err=0 , Succ=0 PKT acct_timeout , Num=3 , Err=1 , Succ=2 Realtime Account timer , Num=0 , Err=0 , Succ=0 PKT response , Num=1 , Err=0 , Succ=1 EAP reauth_request , Num=0 , Err=0 , Succ=0 PORTAL access , Num=0 , Err=0 , Succ=0 Update ack , Num=0 , Err=0 , Succ=0 PORTAL access ack , Num=0 , Err=0 , Succ=0 Session ctrl pkt , Num=0 , Err=0 , Succ=0 RADIUS sent messages statistic: Auth accept , Num=0 Auth reject , Num=0 EAP auth replying , Num=0 Account success , Num=0 Account failure , Num=0 Cut req , Num=0 RecError_MSG_sum:0 SndMSG_Fail_sum :0 Timer_Err :0 Alloc_Mem_Err :0 State Mismatch :0 Other_Error :0 No-response-acct-stop packet =0 Discarded No-response-acct-stop packet for buffer overflow =0 The other problem is that when the RADIUS server is not available I can not log in to the switch. The switch have 3 local accounts but none of them works. How can I specify the switch to use the local accounts in case that the RADIUS service is not available?

    Read the article

  • outgoing DNS flood targeted to non-ISP hosts

    - by radudani
    Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform; my question is not about the effects of the flood, but about the nature of the source of it; is this a kind of known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me; Thank you for any hint, Danny 14:40:10.115876 IP 192.168.7.42.4122 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 14:40:10.115943 IP 192.168.7.42.4124 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 14:40:10.116015 IP 192.168.7.42.4126 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 14:40:10.116086 IP 192.168.7.42.4128 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 14:40:10.116154 IP 192.168.7.42.4130 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 14:40:10.116222 IP 192.168.7.42.4132 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 14:40:10.116290 IP 192.168.7.42.4134 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 14:40:10.116358 IP 192.168.7.42.4136 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 14:40:10.116430 IP 192.168.7.42.4138 67.228.0.181.53: S 930184999:930184999(0) win 16384 14:40:10.116498 IP 192.168.7.42.4140 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 14:40:10.116566 IP 192.168.7.42.4142 67.228.0.181.53: S 546074424:546074424(0) win 16384 14:40:10.116634 IP 192.168.7.42.4144 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 14:40:10.116702 IP 192.168.7.42.4146 67.228.0.181.53: S 668634627:668634627(0) win 16384 14:40:10.116769 IP 192.168.7.42.4148 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 14:40:10.117360 IP 192.168.7.42.4111 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OSM-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

    Read the article

  • ls hangs for a certain directory

    - by Jakobud
    There is a particular directory (/var/www), that when I run ls (with or without some options), the command hangs and never completes. There is only about 10-15 files and directories in /var/www. Mostly just text files. Here is some investigative info: [me@server www]$ df . Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_dev-lv_root 50G 19G 29G 40% / [me@server www]$ df -i . Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/vg_dev-lv_root 3.2M 435K 2.8M 14% / find works fine. Also I can type in cd /var/www/ and press TAB before pressing enter and it will successfully tab-completion list of all files/directories in there: [me@server www]$ cd /var/www/ cgi-bin/ create_vhost.sh html/ manual/ phpMyAdmin/ scripts/ usage/ conf/ error/ icons/ mediawiki/ rackspace sqlbuddy/ vhosts/ [me@server www]$ cd /var/www/ I have had to kill my terminal sessions several times because of the ls hanging: [me@server ~]$ ps | grep ls gdm 6215 0.0 0.0 488152 2488 ? S<sl Jan18 0:00 /usr/bin/pulseaudio --start --log-target=syslog root 23269 0.0 0.0 117724 1088 ? D 18:24 0:00 ls -Fh --color=always -l root 23477 0.0 0.0 117724 1088 ? D 18:34 0:00 ls -Fh --color=always -l root 23579 0.0 0.0 115592 820 ? D 18:36 0:00 ls -Fh --color=always root 23634 0.0 0.0 115592 816 ? D 18:38 0:00 ls -Fh --color=always root 23740 0.0 0.0 117724 1088 ? D 18:40 0:00 ls -Fh --color=always -l me 23770 0.0 0.0 103156 816 pts/6 S+ 18:41 0:00 grep ls kill doesn't seem to have any affect on the processes, even as sudo. What else should I do to investigate this problem? It just randomly started happening today. UPDATE dmesg is a big list of things, mostly related to an external USB HDD that I've mounted too many times and the max mount count has been reached, but that is an un-related problem I think. Near the bottom of dmesg I'm seeing this: INFO: task ls:23579 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ls D ffff88041fc230c0 0 23579 23505 0x00000080 ffff8801688a1bb8 0000000000000086 0000000000000000 ffffffff8119d279 ffff880406d0ea20 ffff88007e2c2268 ffff880071fe80c8 00000003ae82967a ffff880407169ad8 ffff8801688a1fd8 0000000000010518 ffff880407169ad8 Call Trace: [<ffffffff8119d279>] ? __find_get_block+0xa9/0x200 [<ffffffff814c97ae>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814c964b>] mutex_lock+0x2b/0x50 [<ffffffff8117a4d3>] do_lookup+0xd3/0x220 [<ffffffff8117b145>] __link_path_walk+0x6f5/0x1040 [<ffffffff8117a47d>] ? do_lookup+0x7d/0x220 [<ffffffff8117bd1a>] path_walk+0x6a/0xe0 [<ffffffff8117beeb>] do_path_lookup+0x5b/0xa0 [<ffffffff8117cb57>] user_path_at+0x57/0xa0 [<ffffffff81178986>] ? generic_readlink+0x76/0xc0 [<ffffffff8117cb62>] ? user_path_at+0x62/0xa0 [<ffffffff81171d3c>] vfs_fstatat+0x3c/0x80 [<ffffffff81258ae5>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff81171eab>] vfs_stat+0x1b/0x20 [<ffffffff81171ed4>] sys_newstat+0x24/0x50 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b And also, strace ls /var/www/ spits out a whole BUNCH of information. I don't know what is useful here... The last handful of lines: ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=68, ws_col=145, ws_xpixel=0, ws_ypixel=0}) = 0 stat("/var/www/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/var/www/", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) getdents(3, /* 16 entries */, 32768) = 488 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3093b18000 write(1, "cgi-bin conf create_vhost.sh\te"..., 125cgi-bin conf create_vhost.sh error html icons manual mediawiki phpMyAdmin rackspace scripts sqlbuddy usage vhosts ) = 125 close(1) = 0 munmap(0x7f3093b18000, 4096) = 0 close(2) = 0 exit_group(0) = ?

    Read the article

  • How do i change the BIOS boot splash screen?

    - by YumYumYum
    I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

    Read the article

  • Why is syslog so much slower than file IO?

    - by ceving
    I wrote a simple test program to measure the performance of the syslog function. This are the results of my test system: (Debian 6.0.2 with Linux 2.6.32-5-amd64) Test Case Calls Payload Duration Thoughput [] [MB] [s] [MB/s] -------------------- ---------- ---------- ---------- ---------- syslog 200000 10.00 7.81 1.28 syslog %s 200000 10.00 9.94 1.01 write /dev/null 200000 10.00 0.03 343.93 printf %s 200000 10.00 0.13 76.29 The test program did 200000 system calls writing 50 Bytes of data during each call. Why is Syslog more than ten times slower than file IO? This is the program I used to perform the test: #include <fcntl.h> #include <stdio.h> #include <string.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <syslog.h> #include <unistd.h> const int iter = 200000; const char msg[] = "123456789 123456789 123456789 123456789 123456789"; struct timeval t0; struct timeval t1; void start () { gettimeofday (&t0, (void*)0); } void stop () { gettimeofday (&t1, (void*)0); } void report (char *action) { double dt = (double)t1.tv_sec - (double)t0.tv_sec + 1e-6 * ((double)t1.tv_usec - (double)t0.tv_usec); double mb = 1e-6 * sizeof (msg) * iter; if (action == NULL) printf ("Test Case Calls Payload Duration Thoughput \n" " [] [MB] [s] [MB/s] \n" "-------------------- ---------- ---------- ---------- ----------\n"); else { if (strlen (action) > 20) action[20] = 0; printf ("%-20s %-10d %-10.2f %-10.2f %-10.2f\n", action, iter, mb, dt, mb / dt); } } void test_syslog () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, msg); stop (); closelog (); report ("syslog"); } void test_syslog_format () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, "%s", msg); stop (); closelog (); report ("syslog %s"); } void test_write_devnull () { int i, fd; fd = open ("/dev/null", O_WRONLY); start (); for (i = 0; i < iter; i++) write (fd, msg, sizeof(msg)); stop (); close (fd); report ("write /dev/null"); } void test_printf () { int i; FILE *fp; fp = fopen ("/tmp/test_printf", "w"); start (); for (i = 0; i < iter; i++) fprintf (fp, "%s", msg); stop (); fclose (fp); report ("printf %s"); } int main (int argc, char **argv) { report (NULL); test_syslog (); test_syslog_format (); test_write_devnull (); test_printf (); }

    Read the article

  • RedHat 5.5 server does not show per processor memory utilization

    - by Mike S
    I have been searching all over internet but not finding any leads. I have a system with a memory leak that I am trying to troubleshoot. Unfortunately I am not able to see per processor memory utilization. Here are the outputs of TOP and PS commands. Linux SERVER_NAME 2.6.18-194.8.1.el5 #1 SMP Wed Jun 23 10:52:51 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux top - 09:17:13 up 18:43, 3 users, load average: 0.00, 0.00, 0.00 Tasks: 375 total, 1 running, 373 sleeping, 0 stopped, 1 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32922828k total, 32776712k used, 146116k free, 267128k buffers Swap: 5245212k total, 0k used, 5245212k free, 32141044k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 10348 744 620 S 0.0 0.0 0:05.65 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.05 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 % ps -auxf | sort -nr -k 4 | head -10 Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ xfs 6205 0.0 0.0 23316 3892 ? Ss Aug19 0:00 xfs -droppriv -daemon uuidd 6101 0.0 0.0 60976 224 ? Ss Aug19 0:00 /usr/sbin/uuidd USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND smmsp 6130 0.0 0.0 57900 1784 ? Ss Aug19 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue rpc 5126 0.0 0.0 8052 632 ? Ss Aug19 0:00 portmap root 99 0.0 0.0 0 0 ? S< Aug19 0:00 [events/1] root 98 0.0 0.0 0 0 ? S< Aug19 0:00 [events/0] root 97 0.0 0.0 0 0 ? S< Aug19 0:00 [watchdog/31] root 96 0.0 0.0 0 0 ? SN Aug19 0:00 [ksoftirqd/31] root 95 0.0 0.0 0 0 ? S< Aug19 0:00 [migration/31] Any help with this is appretiate.

    Read the article

  • Apache Getting Bogged Down By Certain Script (Wp-Cron.php) - How To Kill Process Automatically

    - by user50037
    I have a server that is running a number of wordpress blogs, and a number of them have several hundred/thousand posts. Every couple of days, the server slows to a crawl due to a file being run on Wordpress called WP-cron.php. My entire apache process log turns into this : http:// imgur.com/A7K9k.png Times that by quite a bit. And server no go. Each process takes up about 1.1% of ram. And when we have 50 of them on the go. It gets insane. Not all of them are coming from the same blog, they are pretty widespread. In the Apache process page of WHM, they are usually ALL set to the status of "C", which means closing. But they can sit there until they crash the server, and they still hold the memory. Just google "wp-cron.php load" and you will find plenty of people with similar issues. In anycase, we have think it is down to users adding a tonne of dead "pinglists" to their wordpress installation. Which in turn wordpress loops through them endlessly. Problem number 1. Does anyone have any other suggestions about what would cause the Wordpress file wp-cron.php to loop endlessly. I still think it is down to pings, because all of the people we have contacted about their account load going sky high, have had massive ping lists. Problem number 2. Even if it is down to excessive pinglists in wordpress. We cannot be babying every single account on the server waiting for it to start spawning the wp-cron processes. It often happens overnight, and I start getting SMS alerts at 2am about the load. I have CSF installed, which apparently would have ended the processes if they ran over XXX time. But I have been told that it won't catch the processes because they end up in this state of "closing" (They show up as "C" on the Apache page of WHM). Apparently CSF will only kill processes that are "running" which C does not count. I have seen various other scripts such as : http://dltj.org/article/die-apache-die/ . I took a look at the stat of /proc. But I was boggled at which delimited part was the time running. And if there was any way I could connect it back to an actual Apache process, so that I could see what file was running (So only close connections connected to wp-cron.php, with a state of "C"). Overall I know Problem 2 glosses over the real reason. But I do put the whole thing to excessive pinglists in Wordpress. But I just cannot sit there and babysit every single installation 24/7. So I need a way to save the server when I am not available. Any help would be much appreciated.

    Read the article

  • LibPCL issues on Ubuntu 13.10

    - by user254885
    i wanted to install the Point Cloud Library but it does not work i use an ODROID board(ARM processor) Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libpcl-all : Depends: libpcl-1.7-all but it is not going to be installed E: Unable to correct problems, you have held broken packages. by compiling v1.7 , i get these errors : /usr/lib/gcc/arm-linux-gnueabihf/4.8/../../../arm-linux-gnueabihf/libpthread.a(ptw-fcntl.o): In function `__fcntl_nocancel': /build/buildd/eglibc-2.17/nptl/../sysdeps/unix/sysv/linux/i386/fcntl.c:37: undefined reference to `__libc_do_syscall' /usr/lib/gcc/arm-linux-gnueabihf/4.8/../../../arm-linux-gnueabihf/libpthread.a(ptw-fcntl.o): In function `__libc_fcntl': /build/buildd/eglibc-2.17/nptl/../sysdeps/unix/sysv/linux/i386/fcntl.c:53: undefined reference to `__libc_do_syscall' /build/buildd/eglibc-2.17/nptl/../sysdeps/unix/sysv/linux/i386/fcntl.c:57: undefined reference to `__libc_do_syscall' /usr/lib/gcc/arm-linux-gnueabihf/4.8/../../../arm-linux-gnueabihf/libpthread.a(ptw-open64.o): In function `__libc_open64': /build/buildd/eglibc-2.17/nptl/../sysdeps/unix/sysv/linux/open64.c:41: undefined reference to `__libc_do_syscall' /build/buildd/eglibc-2.17/nptl/../sysdeps/unix/sysv/linux/open64.c:45: undefined reference to `__libc_do_syscall' /usr/lib/gcc/arm-linux-gnueabihf/4.8/../../../arm-linux-gnueabihf/libpthread.a(cancellation.o):/build/buildd/eglibc-2.17/nptl/cancellation.c:96: more undefined references to `__libc_do_syscall' follow collect2: error: ld returned 1 exit status make[2]: *** [bin/pcl_convert_pcd_ascii_binary] Error 1 make[1]: *** [io/tools/CMakeFiles/pcl_convert_pcd_ascii_binary.dir/all] Error 2 make: *** [all] Error 2 i could not find anything in google to solve these errors i believe some packages were not ported for ARM processors any help would be appreciated $ dpkg --list | grep headers ii linux-headers-3.0.63-odroidx2 20130215 ii linux-headers-3.0.71-odroidx2 20130415 ii linux-headers-3.0.74-odroidx2 20130417 ii linux-headers-3.0.75-odroidx2 20130426 ii linux-headers-3.1.10-6 3.1.10-6.10 ii linux-headers-3.1.10-6-ac100 3.1.10-6.10 ii linux-headers-ac100 3.1.10.6.2 installing packages did'nt do well sudo apt-get install linux-generic [sudo] password for odroid: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: debugedit libasound2-dev libestools2.1-dev librpmbuild3 librpmsign1 thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-ko Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-headers-3.11.0-17 linux-headers-3.11.0-17-generic linux-headers-generic linux-image-3.11.0-17-generic linux-image-generic Suggested packages: fdutils linux-doc-3.11.0 linux-source-3.11.0 linux-tools The following NEW packages will be installed: linux-generic linux-headers-3.11.0-17 linux-headers-3.11.0-17-generic linux-headers-generic linux-image-3.11.0-17-generic linux-image-generic 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 58.2 MB of archives. After this operation, 203 MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-image-3.11.0-17-generic armhf 3.11.0-17.31 [44.5 MB] Get:2 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-image-generic armhf 3.11.0.17.18 [2,356 B] Get:3 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-headers-3.11.0-17 all 3.11.0-17.31 [12.6 MB] Get:4 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-headers-3.11.0-17-generic armhf 3.11.0-17.31 [1,128 kB] Get:5 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-headers-generic armhf 3.11.0.17.18 [2,350 B] Get:6 http://ports.ubuntu.com/ubuntu-ports/ saucy-updates/main linux-generic armhf 3.11.0.17.18 [1,726 B] Fetched 58.2 MB in 13s (4,379 kB/s) Selecting previously unselected package linux-image-3.11.0-17-generic. (Reading database ... 258618 files and directories currently installed.) Unpacking linux-image-3.11.0-17-generic (from .../linux-image-3.11.0-17-generic_3.11.0-17.31_armhf.deb) ... Examining /etc/kernel/preinst.d/ Done. Selecting previously unselected package linux-image-generic. Unpacking linux-image-generic (from .../linux-image-generic_3.11.0.17.18_armhf.deb) ... Selecting previously unselected package linux-headers-3.11.0-17. Unpacking linux-headers-3.11.0-17 (from .../linux-headers-3.11.0-17_3.11.0-17.31_all.deb) ... Selecting previously unselected package linux-headers-3.11.0-17-generic. Unpacking linux-headers-3.11.0-17-generic (from .../linux-headers-3.11.0-17-generic_3.11.0-17.31_armhf.deb) ... Selecting previously unselected package linux-headers-generic. Unpacking linux-headers-generic (from .../linux-headers-generic_3.11.0.17.18_armhf.deb) ... Selecting previously unselected package linux-generic. Unpacking linux-generic (from .../linux-generic_3.11.0.17.18_armhf.deb) ... Setting up linux-image-3.11.0-17-generic (3.11.0-17.31) ... Running depmod. update-initramfs: deferring update (hook will be called later) cp: cannot stat ‘/boot/initrd.img-3.11.0-17-generic’: No such file or directory Failed to copy /boot/initrd.img-3.11.0-17-generic to /boot/initrd.img at /var/lib/dpkg/info/linux-image-3.11.0-17-generic.postinst line 730. dpkg: error processing linux-image-3.11.0-17-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.11.0-17-generic; however: Package linux-image-3.11.0-17-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured Setting up linux-headers-3.11.0-17 (3.11.0-17.31) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up linux-headers-3.11.0-17-generic (3.11.0-17.31) ... Examining /etc/kernel/header_postinst.d. Setting up linux-headers-generic (3.11.0.17.18) ... dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.11.0.17.18); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.11.0-17-generic linux-image-generic linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1) i had to uninstall these cos they were messing up other packages installation(buildessentials were already installed)

    Read the article

  • 11gR2 ???:Oracle Cluster Health Monitor(CHM)??

    - by JaneZhang(???)
       Cluster Health Monitor(????CHM)???Oracle?????,?????????????(CPU????SWAP????I/O?????)??????CHM??????????   ??????????????????????Hang?????(Eviction)????????????????,??????CHM????????????????????,????????????? CHM???????????:    11.2.0.2 ?????? Oracle Grid Infrastructure for Linux (???Linux Itanium) ?Solaris (Sparc 64 ? x86-64)    11.2.0.3 ????? Oracle Grid Infrastructure for AIX ? Windows (???Windows Itanium)?    ????,???????????CHM?????(ora.crf)???:    $ crsctl stat res -t -init    --------------------------------------------------------------------------------    NAME           TARGET  STATE        SERVER                   STATE_DETAILS       Cluster Resources ora.crf        ONLINE  ONLINE       rac1 CHM????????:    1). System Monitor Service(osysmond):?????????????,osysmond????????????????cluster logger service,???????????????????CHM?????      $ ps -ef|grep osysmond       root      7984     1  0 Jun05 ?        01:16:14 /u01/app/11.2.0/grid/bin/osysmond.bin    2). Cluster Logger Service(ologgerd):???????,ologgerd ???????(master),???????(standby)??ologgerd???????????????,??????????     ???:     $ ps -ef|grep ologgerd       root      8257     1  0 Jun05 ?        00:38:26 /u01/app/11.2.0/grid/bin/ologgerd -M -d       /u01/app/11.2.0/grid/crf/db/rac2     ???:      $ ps -ef|grep ologgerd       root      8353     1  0 Jun05 ?        00:18:47 /u01/app/11.2.0/grid/bin/ologgerd -m rac2 -r -d /u01/app/11.2.0/grid/crf/db/rac1 CHM Repository:?????????,?????,????Grid Infrastructure home ? ,??1 GB ?????,???????????0.5GB???? ?????OCLUMON??????????????????(??????3????)? ??????????????:     $ oclumon manage -get reppath       CHM Repository Path = /u01/app/11.2.0/grid/crf/db/rac2       Done     $ oclumon manage -get repsize       CHM Repository Size = 68082 <====????       Done     ????:     $ oclumon manage -repos reploc /shared/oracle/chm      ????:     $ oclumon manage -repos resize 68083 <==?3600(??) ? 259200(3?)??      rac1 --> retention check successful      New retention is 68083 and will use 1073750609 bytes of disk space      CRS-9115-Cluster Health Monitor repository size change completed on all nodes.      Done ??CHM???????????:     1. ?????Grid_home/bin/diagcollection.pl:         1). ??,??cluster logger service????:         $ oclumon manage -get master         Master = rac2         2).?root??????rac2???????:         # <Grid_home>/bin/diagcollection.pl -collect -chmos -incidenttime inc_time -incidentduration duration         inc_time?????????????,???MM/DD/YYYY24HH:MM:SS, duration??????????????????         ??:# diagcollection.pl -collect -crshome /u01/app/11.2.0/grid -chmoshome  /u01/app/11.2.0/grid -chmos -incidenttime 06/15/201215:30:00 -incidentduration 00:05       3).????????,CHM?????????chmosData_rac2_20120615_1537.tar.gz?    2. ??????CHM?????????oclumon:        $oclumon dumpnodeview [[-allnodes] | [-n node1 node2] [-last "duration"] | [-s "time_stamp" -e "time_stamp"] [-v] [-warning]] [-h]        -s??????,-e??????        $ oclumon dumpnodeview -allnodes -v -s "2012-06-15 07:40:00" -e "2012-06-15 07:57:00" > /tmp/chm1.txt       $ oclumon dumpnodeview -n node1 node2 node3 -last "12:00:00" >/tmp/chm1.txt       $ oclumon dumpnodeview -allnodes -last "00:15:00" >/tmp/chm1.txt ???/tmp/chm1.txt??????:----------------------------------------Node: rac1 Clock: '06-15-12 07.40.01' SerialNo:168880----------------------------------------SYSTEM:#cpus: 1 cpu: 17.96 cpuq: 5 physmemfree: 32240 physmemtotal: 2065856 mcache: 1064024 swapfree: 3988376 swaptotal: 4192956 ior: 57 iow: 59 ios: 10 swpin: 0 swpout: 0 pgin: 57 pgout: 59 netr: 65.767 netw: 34.871 procs: 183 rtprocs: 10 #fds: 4902 #sysfdlimit: 6815744 #disks: 4 #nics: 3  nicErrors: 0TOP CONSUMERS:topcpu: 'mrtg(32385) 64.70' topprivmem: 'ologgerd(8353) 84068' topshm: 'oracle(8760) 329452' topfd: 'ohasd.bin(6627) 720' topthread: 'crsd.bin(8235) 44'PROCESSES:name: 'mrtg' pid: 32385 #procfdlimit: 65536 cpuusage: 64.70 privmem: 1160 shm: 1584 #fd: 5 #threads: 1 priority: 20 nice: 0name: 'oracle' pid: 32381 #procfdlimit: 65536 cpuusage: 0.29 privmem: 1456 shm: 12444 #fd: 32 #threads: 1 priority: 15 nice: 0...name: 'oracle' pid: 8756 #procfdlimit: 65536 cpuusage: 0.0 privmem: 2892 shm: 24356 #fd: 47 #threads: 1 priority: 16 nice: 0----------------------------------------Node: rac2 Clock: '06-15-12 07.40.02' SerialNo:168878----------------------------------------SYSTEM:#cpus: 1 cpu: 40.72 cpuq: 8 physmemfree: 34072 physmemtotal: 2065856 mcache: 1005636 swapfree: 3991808 swaptotal: 4192956 ior: 54 iow: 104 ios: 11 swpin: 0 swpout: 0 pgin: 54 pgout: 104 netr: 77.817 netw: 33.008 procs: 178 rtprocs: 10 #fds: 4948 #sysfdlimit: 6815744 #disks: 4 #nics: 4  nicErrors: 0TOP CONSUMERS:topcpu: 'orarootagent.bi(8490) 1.59' topprivmem: 'ologgerd(8257) 83108' topshm: 'oracle(8873) 324868' topfd: 'ohasd.bin(6744) 720' topthread: 'crsd.bin(8362) 47'PROCESSES:name: 'oracle' pid: 9040 #procfdlimit: 65536 cpuusage: 0.19 privmem: 6040 shm: 121712 #fd: 33 #threads: 1 priority: 16 nice: 0...  ??CHM?????,???Oracle????:  http://docs.oracle.com/cd/E11882_01/rac.112/e16794/troubleshoot.htm#CWADD92242  Oracle® Clusterware Administration and Deployment Guide  11g Release 2 (11.2)  Part Number E16794-17  ?? My Oracle Support??:  Cluster Health Monitor (CHM) FAQ (Doc ID 1328466.1)

    Read the article

  • Optimizing apache server load

    - by Jevgeni Smirnov
    We have an issue with a dedicated server load. We have 16 processors with 4 core @ 2.40GHz, if I understood correctly cat /proc/cpuinfo output. Unfortunately, I don't have access to free -m or vmstat. But from top I got that we have 24 GB. And snapshot from top about processes: As far as I see, memory is not used at all. But the cpu is used heavily. Apache consumes most of CPU. Another useful piece of information: Every 1.0s: ps u -C httpd,mysqld,php Tue Mar 27 10:48:19 2012 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 7476 0.0 0.1 446808 37880 ? SNs Mar06 0:43 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf mysql 36061 41.6 2.1 1113672 529876 ? SNl Feb20 21503:48 /opt/zone/sbin/mysqld --basedir=/opt/zone --datadir=/srvdata/mysql --user=mysql --log-error=/srvdata/mysql/dn79.err --pid-file=/srvdata/mysql/mysqld.pid --socket=/tmp/mysql.sock --port=3306 root 37257 0.0 0.0 424056 16840 ? SNs Mar22 1:03 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 52743 0.0 0.1 447100 30360 ? SN 10:40 0:00 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf http 52744 0.0 0.1 447100 30360 ? SN 10:40 0:00 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf http 52745 0.0 0.1 447100 30360 ? SN 10:40 0:00 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf http 52746 0.0 0.1 447100 30360 ? SN 10:40 0:00 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf http 52747 0.0 0.1 446956 30324 ? SN 10:40 0:00 /opt/zone/sbin/httpd -D SSL -D SLOT_ID0 -f /etc/opt/zone/apache/ssl_httpd.conf http 52980 69.1 1.8 852468 458088 ? RN 10:41 5:02 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 53483 47.0 0.8 615088 221040 ? RN 10:43 2:05 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 53641 1.8 0.2 446580 54632 ? SN 10:45 0:03 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54384 81.2 0.9 625828 229972 ? RN 10:45 2:14 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54411 47.7 0.5 535992 142416 ? RN 10:45 1:09 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54470 41.7 0.4 512528 120012 ? RN 10:46 0:54 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54475 0.1 0.1 437016 41528 ? SN 10:46 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54486 1.5 0.2 445636 53916 ? SN 10:46 0:02 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54531 2.5 0.2 445424 53012 ? SN 10:46 0:02 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54549 0.0 0.0 424188 9188 ? SN 10:46 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54642 0.0 0.0 424188 9200 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54651 0.0 0.0 424188 9188 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54661 0.0 0.0 424188 9208 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54663 6.9 0.2 449936 58560 ? SN 10:47 0:03 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54666 6.0 0.2 453356 61124 ? SN 10:47 0:02 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54667 2.8 0.1 437608 42088 ? SN 10:47 0:01 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54670 1.5 0.1 437540 42172 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54672 2.1 0.1 439076 43648 ? SN 10:47 0:01 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54709 0.0 0.0 424188 9192 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54711 1.0 0.1 437284 41780 ? SN 10:47 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54712 11.8 0.2 448172 54700 ? SN 10:47 0:02 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54720 0.0 0.0 424188 9192 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54721 0.0 0.0 424188 9188 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54747 9.1 0.2 443568 51848 ? SN 10:48 0:01 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54782 1.8 0.1 438708 37896 ? RN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54784 0.0 0.0 424188 9180 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54785 0.0 0.0 424188 9188 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54789 0.0 0.0 424188 9188 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54790 0.0 0.0 424188 9188 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54791 0.0 0.0 424188 9188 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 http 54792 0.0 0.0 424056 8352 ? SN 10:48 0:00 /opt/zone/sbin/httpd -f /etc/opt/zone/apache/httpd.conf -D SLOT_ID0 Webalizer shows following: What can be done in the following situation? The application is Magento.

    Read the article

  • Day 2 - Game Design Documentation

    - by dapostolov
    So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

    Read the article

  • UnicodeEncodeError when uploading files in Django admin

    - by Samuel Linde
    Note: I asked this question on StackOverflow, but I realize this might be a more proper place to ask this kind of question. I'm trying to upload a file called 'Testaråäö.txt' via the Django admin app. I'm running Django 1.3.1 with Gunicorn 0.13.4 and Nginx 0.7.6.7 on a Debian 6 server. Database is PostgreSQL 8.4.9. Other Unicode data is saved to the database with no problem, so I guess the problem must be with the filesystem somehow. I've set http { charset utf-8; } in my nginx.conf. LC_ALL and LANG is set to 'sv_SE.UTF-8'. Running 'locale' verifies this. I even tried setting LC_ALL and LANG in my nginx init script just to make sure locale is set properly. Here's the traceback: Traceback (most recent call last): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 307, in wrapper return self.admin_site.admin_view(view)(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/views/decorators/cache.py", line 79, in _wrapped_view_func response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/sites.py", line 197, in inner return view(request, *args, **kwargs) File "/srv/django/letebo/app/cms/admin.py", line 81, in change_view return super(PageAdmin, self).change_view(request, obj_id) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 28, in _wrapper return bound_func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 24, in bound_func return func(self, *args2, **kwargs2) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/transaction.py", line 217, in inner res = func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 985, in change_view self.save_formset(request, form, formset, change=True) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 677, in save_formset formset.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 482, in save return self.save_existing_objects(commit) + self.save_new_objects(commit) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 613, in save_new_objects self.new_objects.append(self.save_new(form, commit=commit)) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 717, in save_new obj.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 504, in save_base self.save_base(cls=parent, origin=org, using=using) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 543, in save_base for f in meta.local_fields if not isinstance(f, AutoField)] File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 255, in pre_save file.save(file.name, file, save=False) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 92, in save self.name = self.storage.save(name, content) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 48, in save name = self.get_available_name(name) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 74, in get_available_name while self.exists(name): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 218, in exists return os.path.exists(self.path(name)) File "/srv/.virtualenvs/letebo/lib/python2.6/genericpath.py", line 18, in exists st = os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 52-54: ordinal not in range(128) I tried running Gunicorn with debugging turned on, and the file uploads without any problem at all. I suppose this must mean that the issue is with Nginx. Still beats me where to look, though. Here are the raw response headers from Gunicorn and Nginx, if it makes any sense: Gunicorn: HTTP/1.1 302 FOUND Server: gunicorn/0.13.4 Date: Thu, 09 Feb 2012 14:50:27 GMT Connection: close Transfer-Encoding: chunked Expires: Thu, 09 Feb 2012 14:50:27 GMT Vary: Cookie Last-Modified: Thu, 09 Feb 2012 14:50:27 GMT Location: http://my-server.se:8000/admin/cms/page/15/ Cache-Control: max-age=0 Content-Type: text/html; charset=utf-8 Set-Cookie: messages="yada yada yada"; Path=/ Nginx: HTTP/1.1 500 INTERNAL SERVER ERROR Server: nginx/0.7.67 Date: Thu, 09 Feb 2012 14:50:57 GMT Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: close Vary: Cookie 500 UPDATE: Both locale.getpreferredencoding() and sys.getfilesystemencoding() outputs 'UTF-8'. locale.getdefaultlocale() outputs ('sv_SE', 'UTF8'). This seem correct to me, so I'm still not sure why I keep getting these errors.

    Read the article

  • php crashes with no core file and this message : apc_mmap failed

    - by greg0ire
    Description of the problem Regularly, cron php processes crash on our production server, which result in mails with the following body : PHP Fatal error: PHP Startup: apc_mmap: mmap failed: in Unknown on line 0 Segmentation fault (core dumped) I think the Segmentation fault (core dumped) should result in core files being handled by apport and then written in /var/crashes, but the files I can see there are there since yesterday, although the last crash occured today : -rw-r----- 1 root whoopsie 1138528 mai 22 04:09 _usr_bin_php5.0.crash -rw-r----- 1 frontoffice whoopsie 1166373 mai 20 18:00 _usr_bin_php5.1005.crash -rw-r----- 1 frontoffice whoopsie 81622658 mai 22 00:05 _usr_sbin_php5-fpm.1005.crash I tried to download the last one anyway, and ran gdb /usr/sbin/php5-fpm /tmp/_usr_sbin_php5-fpm.1005.crash, only to be told that the file is not a core file (its format was not recognized). Here is the server's apc configuration : cat /etc/php5/cli/conf.d/20-apc.ini extension=apc.so apc.shm_size=512M apc.ttl=3600 apc.user_ttl=3600 apc.enable_cli=1 I'm mostly worried about the apc.shm_size… isn't it too high or too low ? I understand it has to do with the size of memory segments. Question(s) What could be the problem ? How can I troubleshoot it (how can I get a valid core file ?) ? System information free total used free shared buffers cached Mem: 5081296 4354684 726612 0 374744 959968 -/+ buffers/cache: 3019972 2061324 Swap: 522236 516888 5348 cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" php -v PHP 5.4.17-1~precise+1 (cli) (built: Jul 17 2013 18:14:06) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies php -i excerpt : Configuration apc APC Support => enabled Version => 3.1.13 APC Debugging => Disabled MMAP Support => Enabled MMAP File Mask => Locking type => pthread mutex Locks Serialization Support => php Revision => $Revision: 327136 $ Build Date => Nov 20 2012 18:41:36 Directive => Local Value => Master Value apc.cache_by_default => On => On apc.canonicalize => On => On apc.coredump_unmap => Off => Off apc.enable_cli => On => On apc.enabled => On => On apc.file_md5 => Off => Off apc.file_update_protection => 2 => 2 apc.filters => no value => no value apc.gc_ttl => 3600 => 3600 apc.include_once_override => Off => Off apc.lazy_classes => Off => Off apc.lazy_functions => Off => Off apc.max_file_size => 1M => 1M apc.mmap_file_mask => no value => no value apc.num_files_hint => 1000 => 1000 apc.preload_path => no value => no value apc.report_autofilter => Off => Off apc.rfc1867 => Off => Off apc.rfc1867_freq => 0 => 0 apc.rfc1867_name => APC_UPLOAD_PROGRESS => APC_UPLOAD_PROGRESS apc.rfc1867_prefix => upload_ => upload_ apc.rfc1867_ttl => 3600 => 3600 apc.serializer => default => default apc.shm_segments => 1 => 1 apc.shm_size => 512M => 512M apc.shm_strings_buffer => 4M => 4M apc.slam_defense => On => On apc.stat => On => On apc.stat_ctime => Off => Off apc.ttl => 3600 => 3600 apc.use_request_time => On => On apc.user_entries_hint => 4096 => 4096 apc.user_ttl => 3600 => 3600 apc.write_lock => On => On php -m [PHP Modules] apc bcmath bz2 calendar Core ctype curl date dba dom ereg exif fileinfo filter ftp gd gettext hash iconv imagick intl json ldap libxml mbstring memcache memcached mhash mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_pgsql pdo_sqlite pgsql Phar posix Reflection session shmop SimpleXML soap sockets SPL sqlite3 standard sysvmsg sysvsem sysvshm tidy tokenizer wddx xml xmlreader xmlwriter zip zlib [Zend Modules] ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 39531 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 39531 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25  | Next Page >