Search Results

Search found 2796 results on 112 pages for 'switching desktops'.

Page 22/112 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

  - by user46055

  Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

  Read the article

• is bumblebee supposed to be a "seamless" implementation?

  - by broiyan

  It is said that bumblebee is used to make Nvidia Optimus work on linux. The wikipedia Optimus description says that The switching is designed to be completely seamless and to happen "behind the scenes". However, after installing bumblebee, the recommended test seems to be to compare the operation of glxspheres with the operation of optirun glxspheres. The latter is faster than the former. If the switching is supposed to be seamless, why do we optirun to speed up graphics? Shouldn't it be automatic?

  Read the article

• Design Question

  - by dturner71

  Can I have two independent Connection servers attached to the same vCenter server? Here's my scenario. I'm setting up View 4 to provide desktops to two seperate Windows domains that are on different IP subnets seperated by a firewall. One cluster of physical servers, one vCenter server, linked clones. As I understand it View Connection server has to be a member of a Windows domain in order for quickprep to work. So the way to provide desktops to both Windows domains is to have a Connection server in each one right? Then open ports in the firewall so the Connection server from the other subnet can communicate with vCenter. Any reason why this won't work? Or is there a better way to accomplish it?

  Read the article

• How can I prevent users from installing software?

  - by Cypher

  Our organization is a bit different than most. During certain times of the year, we grow to thousands of employees, and during off-times, less than a hundred. Over the course of a few years, many thousands of people have come and gone in our offices, and left their legacy behind in the form of all sorts of unwanted, unapproved, (and sometimes unlicensed) software installs on our desktops. We are currently installing redundant domain controllers and upgrading current servers, all running Windows Server 2008 Enterprise, and will eventually be able to run a pure 2008 DC network. With that in mind, what are our options in being able to lock down users, such that they cannot install unauthorized software on systems without the assistance (or authorization) of the IT group? We need to support approximately 400 desktops, so automation is key. I've taken note of the Software Restrictions we can implement via Group Policy, but that implies that we already know what users will be installing and attempting to run... not quite so elegant. Any ideas?

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• Release: Oracle Java Development Kit 8, Update 20

  - by Tori Wieldt

  Java Development Kit 8, Update 20 (JDK 8u20) is now available. This latest release of the Java Platform continues to improve upon the significant advances made in the JDK 8 release with new features, security and performance optimizations. These include: new enterprise-focused administration features available in Oracle Java SE Advanced; products offering greater control of Java version compatibility; security updates; and a very useful new feature, the MSI compatible installer. Download Release Notes Java SE 8 Documentation New tools, features and enhancements highlighted from JDK 8 Update 20 are: Advanced Management Console The Java Advanced Management Console 1.0 (AMC) is available for use with the Oracle Java SE Advanced products. AMC employs the Deployment Rule Set (DRS) security feature, along with other functionality, to give system administrators greater and easier control in managing Java version compatibility and security updates for desktops within their enterprise and for ISVs with Java-based applications and solutions. MSI Enterprise JRE Installer Available for Windows 64 and 32 bit systems in the Oracle Java SE Advanced products, the MSI compatible installer enables system administrators to provide automated, consistent installation of the JRE across all desktops in the enterprise, free of user interaction requirements. Performance: String de-duplication resulting in a reduced footprint Improved support in G1 Garbage Collection for long running apps. A new 'force' feature in DRS (Deployment Rule Set) which allows system administrators to specify the JRE with which an applet or Java Web Start application will run. This is useful for legacy applications so end users don't need to approve security exceptions to run.  Java Mission Control 5.4 with new ease-of-use enhancements and launcher integration with Eclipse 4.4 JavaFX on ARM Nashorn performance improvement by persisting bytecode after inital compilation There's much more information to be found in the JDK 8u20 Release Notes.

  Read the article

• Enabling Compiz Viewport Switcher key bindings

  - by David Moles

  I'm running compiz 0.8.2 with compizconfig on Scientific Linux 6.2 with Gnome 2.28.2. In the compizconfig "General Options" I have "Desktop Size" set as follows: Horizontal Virtual Size: 6 Vertical Virtual Size: 1 Number of Desktops: 1 This gets me the layout I want, i.e. 6 workspaces in a horizontal layout. Ctrl-alt-cursor-keys work fine for switching between them. However, I can't figure out how to get key bindings for specific workspaces. I've tried enabling "Viewport Switcher" in compizconfig, and tried various combinations both in "Number-based viewport switching" and "Go to specific viewport", to no apparent effect. My first thought was that something else was eating the specific key bindings I chose, but I think I've tried every combination of shift, control, alt and super (i.e., the Windows key) by now. I tried setting 6 desktops under "General Options" instead of one desktop with horizontal virtual size 6, but that doesn't seem to make a difference either. What am I missing?

  Read the article

• How to open a program on particular desktop?

  - by Vi

  When I start GUI program, it's window appears appears on currently active desktop (essentially, on random desktop). How to make it to appear on the specified desktop? For example, at startup I want certain programs to be started and distributed to desktops. I've already set up config file of openbox to force some programs to always start on specific desktop. Ideally it should be like: start_on_desktop 1 gnome-terminal --tab -e program1 --tab -e program2 start_on_desktop 2 gnome-terminal --tab -e program3 --tab -e program4 start_on_desktop 3 firefox It should be able to start the same program on other desktop. Also dislike when I start program while being on desktop X then switch to desktop Y and SUDDENLY a program which should be on X appears on Y. When I start lots of programs on and switch often between desktops they end up being in chaos and I need to collect them together and redistribute sanely. Also I want the first initial gnome-terminal to be on desktop 3, but I also want subsequent gnome-terminals to be on the desktop where I pressed the keystroke (also configured in openbox) that launches gnome-terminal.

  Read the article

• JavaOne 2012 in Review

  - by Janice J. Heiss

  Noted freelance writer Steve Meloan has a new article up on otn/java, titled, “JavaOne 2012 Review: Make the Future Java” in which he summarizes the happenings at JavaOne 2012. Along the way, he reminds us that if the future turns out to be anything like the past, Java will do fine: The repeated theme for this year's conference was ‘Make the Future Java,’ and according to recent stats, the groundwork is already firmly in place:    There are 9 million Java developers worldwide.    Three billion devices run Java.    Five billion Java Cards are in use.    One hundred percent of Blu-ray Disc players ship with Java.    Ninety-seven percent of enterprise desktops run Java.    Eighty-nine percent of PC desktops run Java.This year's content curriculum program was organized under seven technical tracks:    Core Java Platform    Development Tools and Techniques    Emerging Languages on the JVM    Enterprise Service Architectures and the Cloud    Java EE Web Profile and Platform Technologies    Java ME, Java Card, Embedded, and Devices    JavaFX and Rich User Experiences”Meloan artfully reminds us of how JavaOne makes learning fun. Have a look at the article here.

  Read the article

• programs becoming unresponsive

  - by Alex

  I have changed from Mint 13 to Ubuntu, complete fresh install. However I regularly get programs becoming unresponsive seems to be more after when switching between screens or work places. eg before i was using firefox have 2 pop up screens(no junk ones) bank login and an ebay chat, switching between them and then firefox faded to grey and I had to force close as it become unresponsive. Ubuntu is very nice to use, but I never had these problems using mint 13. Is this common, are there any fixes coming??

  Read the article

• How to open a program on particular desktop?

  - by Vi.

  When I start GUI program, it's window appears appears on currently active desktop (essentially, on random desktop). How to make it to appear on the specified desktop? For example, at startup I want certain programs to be started and distributed to desktops. I've already set up config file of openbox to force some programs to always start on specific desktop. Ideally it should be like: start_on_desktop 1 gnome-terminal --tab -e program1 --tab -e program2 start_on_desktop 2 gnome-terminal --tab -e program3 --tab -e program4 start_on_desktop 3 firefox It should be able to start the same program on other desktop. Also dislike when I start program while being on desktop X then switch to desktop Y and SUDDENLY a program which should be on X appears on Y. When I start lots of programs on and switch often between desktops they end up being in chaos and I need to collect them together and redistribute sanely. Also I want the first initial gnome-terminal to be on desktop 3, but I also want subsequent gnome-terminals to be on the desktop where I pressed the keystroke (also configured in openbox) that launches gnome-terminal.

  Read the article

• Multiple Windows Desktop areas for Full-Screen applications

  - by arootbeer

  Is it possible to run multiple instances of Windows Explorer within a single user session, or configure multiple desktops that are portions of a screen? I don't know the best way to describe what I want to achieve, but here's a picture of what I've got: I've got a 4 monitor setup, 3 portrait and one landscape, and I am normally running a number of RDP sessions, outlook, chrome, a development environment or two, so on and so forth. Most of these applications support full-screen views which mostly or completely hide the window borders, but on the Windows Desktop they take up a full monitor to do so. What I want to do is have 7 "desktops", "regions", call them what you will, each of which is, for the purposes of applications running in it, a "full screen" environment: I'm not tied to Windows Explorer for this, in case it helps - a different window manager that will support this functionality would be a perfectly acceptable answer.

  Read the article

• CPU spikes cause audio stuttering in Audacious when browsing? (Lubuntu)

  - by Alucai Vivorvel

  My default audio player is Audacious, browser Google Chrome. I tried Firefox, and while I love it, the CPU load spikes when doing something as simple and small and switching a tab, which causes the audio playing to stutter (as sound is onboard and handled thru the CPU). Chrome doesn't do this as much, but there is the occasional stuttering when browsing, which is ridiculous, as not even Windows Vista does this. So I thought maybe it's something to do with how Lubuntu handles sound, I checked and only ALSA was installed. I tried installing PulseAudio, but, while the music "plays", nothing comes through the speakers. Immediately after switching back to ALSA the music pours out of them. So I was wondering if you had any idea what was going on here. I asked on Ubuntu Forums but apparently my problem is too complex, as it's been over a week since the last reply. Specs are: AMD Athlon 64 3200+ @ 2GHz 2GB Corsair 667MHz DDR2 RAM ATi HD Radeon 3650 (AGP) 512MB 500W Cooler Master PSU 80GB SATA II HDD (Vista is installed on 500GB drive) Biostar K8M800 Motherboard

  Read the article

• ubuntu 12.04 sound not working in applications

  - by user109887

  I run Ubuntu on a DELL Vostro 3500 laptop. Everything was working perfectly since this morning, after an update... I can't play any multimedia sound anymore, that includes youtube and others, mp3 in Rythmbox, sound of video in VLC. I can see my device in the setting window and I can play tests sound, but nothing else. Any idea? EDIT: I'm switching very often from to HDMI output, which is deconnected right now. I've tried running VLC, and in the audio menu, you can choose the output so now I can listen to music via VLC but not with other programs. Looks like ubuntu is not totally switching the audio device after unplugging the HDMI cable. Is there any command line which can do so?

  Read the article

• What do desktop users use SSD for? [closed]

  - by Continuation

  I keep hearing people say how much faster their desktops/laptops are after switching to SSD. But then when I ask them what do they use SSD for, the answers are always "booting". Not trying to start a flame war here. I use SSD for my database server and it makes a huge difference. A single SSD can replace a 10 drives RAID 10 and is actually both much faster and MUCH CHEAPER. But I just can't think of a usecase for desktops where SSD could make a similar impact. Sure it's kinda nice to cut boot time down from 40 seconds to 10 seconds. But is it that big a deal? Would love to hear how SSD improves your desktop performance.

  Read the article

• Can't join OS X Mavericks to AD Domain

  - by watkipet

  I'm attempting to join an OS X Mavericks (10.9) client to a Windows Server 2008 Active Directory domain, however the bind fails with this error in the OS X client's system.log: Oct 24 15:03:15 host.domain.com com.apple.preferences.users.remoteservice[5547]: -[ODCAddServerSheetController handleOtherActionError: gotError: Error Domain=com.apple.OpenDirectory Code=5202 "Authentication server encountered an error while attempting the requested operation." UserInfo=0x7f9e6cb3e180 {NSLocalizedDescription=Authentication server encountered an error while attempting the requested operation., NSLocalizedFailureReason=Authentication server encountered an error while attempting the requested operation.}, Authentication server encountered an error while attempting the requested operation. I've joined (bound) Ubuntu Linux clients to the same domain with net ads join in the past with no problems (using the same administrative user). I don't have access to any server logs. Here's the GUI error (from Directory Utility) on the OS X client: Here's the GUI error (from User's and Groups) in System Preferences on the OS X client: Update After some Wiresharking I've got some more info: OS X Client - KDC (over UDP): AS_REQ (no padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_PREAUTH_REQUIRED OS X Client - KDC (over UDP): AS_REQ (this time with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_RESPONSE_TOO_BIG OS X Client - KDC (over TCP): AS_REQ (also with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over TCP): KDC_ERR_ETYPE_NOSUPP ...and that's it. This is what I think is going on: The OS X client sends a kerberos request. The KDC says, "You need to pre-authenticate. Try again" The OS X client tries to pre-authenticate (all this so far is over UDP) Something gets lost on our network and the KDC says, "Oops something went wrong" The OS X client switches to TCP and tries again. Over TCP, the KDC says, "You're using an encryption type I don't support" Note that in its padata records, the OS X client is always using "aes256-cts-hmac-sha1-96" as its encryption type. However, in its KDC_REQ_BODY record it lists the aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, and rc4-hmac encryption types. When the KDC comes back with KDC_ERR_ETYPE_NOSUPP, it uses rc4-hmac as its encryption type in its padata record. I know next to nothing about Kerberos, but it seems to me that the OS X client should go ahead and try the rc4-hmac encryption type. However, it does nothing after this. Update 2 Here's the debug log from Directory Services on the OS X client. Sorry--it's long. 2013-10-25 14:19:13.219128 PDT - 10544.20463 - ODNodeCustomCall request, NodeID: 52A65FAE-4B24-455D-86EC-2199A780D234, Code: 80 2013-10-25 14:19:13.220409 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - client requested OU - 'CN=Computers,DC=domain,DC=com' 2013-10-25 14:19:13.220427 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Binding using '[email protected]' for kerberos ID 2013-10-25 14:19:13.220571 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - new kerberos credential cache 'MEMORY:0x7fa713635470' for '[email protected]' 2013-10-25 14:19:13.220623 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 1 2013-10-25 14:19:13.220639 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 0 patypes 2013-10-25 14:19:13.220653 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.220699 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.221275 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.221326 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.221373 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222588 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222665 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001960 nr: 0.000000 kh: 0.000560 tid: 00000001 2013-10-25 14:19:13.222705 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 2 2013-10-25 14:19:13.222737 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.222752 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: got an KRB-ERROR from KDC 2013-10-25 14:19:13.222775 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: KRB-ERROR -1765328359/Additional pre-authentication required 2013-10-25 14:19:13.222791 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 4 patypes 2013-10-25 14:19:13.222800 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 19 2013-10-25 14:19:13.222808 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 2 2013-10-25 14:19:13.222816 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 16 2013-10-25 14:19:13.222825 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 15 2013-10-25 14:19:13.222840 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using ENC-TS with enctype 18 2013-10-25 14:19:13.222850 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.227443 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.227502 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.228233 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.228320 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.228374 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229957 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229975 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto trying over again (reset): 0 2013-10-25 14:19:13.230023 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.230664 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.230726 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.230818 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.231101 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232743 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232777 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232798 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 2 packets 2 wc: 0.005316 nr: 0.000000 kh: 0.001339 tid: 00010002 2013-10-25 14:19:13.232856 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 3 2013-10-25 14:19:13.232868 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.232900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using keyproc 2013-10-25 14:19:13.232910 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.236487 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: extracting ticket 2013-10-25 14:19:13.236557 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: wc: 0.015944 2013-10-25 14:19:13.237022 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.237444 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.237482 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237551 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238616 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238645 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238674 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001656 nr: 0.000000 kh: 0.000409 tid: 00020001 2013-10-25 14:19:13.238839 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.239302 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.239360 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239429 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239683 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240350 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240387 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240415 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001578 nr: 0.000000 kh: 0.000445 tid: 00030001 2013-10-25 14:19:13.240514 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_credentials_with_flags: DOMAIN.COM wc: 0.003615 2013-10-25 14:19:13.240537 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - valid credentials for [email protected] 2013-10-25 14:19:13.240541 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.240545 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.240555 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Bind Step 5 - Bind/Join computer to domain - 'domain.com' 2013-10-25 14:19:13.241345 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server.domain.com' 2013-10-25 14:19:13.241646 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 12 for host 'server.domain.com:389' address '192.168.0.2' to kqueue list 2013-10-25 14:19:13.241930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server.domain.com' 2013-10-25 14:19:13.241962 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.241969 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.242231 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.242234 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.242239 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.242274 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server.domain.com' 2013-10-25 14:19:13.242282 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.250771 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.250784 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.2' with socket 12 2013-10-25 14:19:13.251513 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - locating site using domain domain.com using CLDAP 2013-10-25 14:19:13.252145 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - using site of 'DOMAINGROUP' from CLDAP 2013-10-25 14:19:13.253626 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server2.domain.com' 2013-10-25 14:19:13.253933 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 13 for host 'server2.domain.com:389' address '192.168.0.1' to kqueue list 2013-10-25 14:19:13.254428 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server2.domain.com' 2013-10-25 14:19:13.254462 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.254468 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.254617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.254661 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.254670 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.254689 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server2.domain.com' 2013-10-25 14:19:13.254695 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.262092 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.262108 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.1' with socket 13 2013-10-25 14:19:13.262982 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write 2013-10-25 14:19:13.264968 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Adding record 'cn=spike,CN=Computers,DC=domain,DC=com' in 'domain.com' The failure point seems to be Computer account either already exists or DC is already Read/Write, however, I can search for 'spike' on the Active Directory server using Active Directory Explorer and it's not there. If I do the same search for the Linux and Windows PCs I added previously, I can find them.

  Read the article

• KVM recommendations

  - by alex

  I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

  Read the article

• Performance mitigations serving content from a UNC share via IIS 6

  - by codepoke

  I have a quad processor vmware instance running Windows 2003 and 1gb ethernet. I'm comparing serving the exact same heavy .NET 2.0 content from the local hard drive versus serving it from a UNC drive. If I use WCAT to load it down, I see about a 40% reduction in transactions/sec while serving from the UNC. Processor time barely moves from 45% and the NIC sits around 40% either way. I don't see any significant memory loading either way. Context Switches/Transaction, though, more than doubles when serving from the UNC. Pathlengths more than double as well, but I believe that's just an expression of the effect of context switching. All told, it looks like the bottleneck is processor switching while waiting on content from the UNC share. Is my experience about the norm? Is there some mitigation I might try? I twiddled HKLM\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\MaxCmds a little bit per http://technet.microsoft.com/en-us/library/dd296694(WS.10).aspx, but to no obvious effect. I kind of doubt my problem is lack of connections, but rather just the act of switching from thread to thread while waiting on data.

  Read the article

• How to train users converting from PC to Mac/Apple at a small non profit?

  - by Everette Mills

  Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

  Read the article

• Implications of Java 6 End of Public Updates for EBS Users

  - by Steven Chan (Oracle Development)

  The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates after February 2013. In other words, nothing will change for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6. These Java SE 6 updates will be made available to EBS users for the Extended Support periods documented in the Oracle Lifetime Support policy document for Oracle Applications (PDF): EBS 11i Extended Support ends November 2013 EBS 12.0 Extended Support ends January 2015 EBS 12.1 Extended Support ends December 2018 Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? No. This upgrade will be highly recommended but currently remains optional. JRE 6 will be available to Windows users to run with EBS for the duration of your respective EBS Extended Support period.  Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  The certification of Oracle E-Business Suite with JRE 7 (for desktop clients accessing EBS Forms-based content) is in its final stages.  If you plan to upgrade your EBS desktop clients to JRE 7 when that certification is released, you can get a head-start on that today. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 will be highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290801.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What will Mac users need? Oracle will provide updates to JRE 7 for Mac OS X users. EBS users running Macs will need to upgrade to JRE 7 to receive JRE updates. The certification of Oracle E-Business Suite with JRE 7 for Mac-based desktop clients accessing EBS Forms-based content is underway. Mac users waiting for that certification may find this article useful: How to Reenable Apple Java 6 Plug-in for Mac EBS Users Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? No. This upgrade will be highly recommended but will be optional for EBS application tier servers running on Windows, Linux, and Solaris.  You can choose to remain on JDK 6 for the duration of your respective EBS Extended Support period.  If you remain on JDK 6, you will continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6. The certification of Oracle E-Business Suite with JDK 7 for EBS application tier servers on Windows, Linux, and Solaris as well as other platforms such as IBM AIX and HP-UX is planned.  Customers running platforms other than Windows, Linux, and Solaris should refer to their Java vendors's sites for more information about their support policies. Related Articles Planning Bulletin for JRE 7: What EBS Customers Can Do Today EBS 11i and 12.1 Support Timeline Changes Frequently Asked Questions about Latest EBS Support Changes Critical Patch Updates During EBS 11i Exception to Sustaining Support Period

  Read the article

• problem with QMainWindow setCentralWidget and stackedWidget

  - by user63898

  Hello i have gui the i created in the designer , simple one . QMainWIndow that contains stackedWidget , the application starts with stackedWidget index 0 that contains qwebkit widget and after some user flow ,it changes to stackedWidget index 1 that contains QTree widget , to center the first widget i use in the QMainWindow constractor this line of code this-setCentralWidget(ui.webView); but when the application switching to index number 1 im getting exception that is coming from the switching command . why ?

  Read the article

• What do I need to look out for when I switch compilers from GCC 3.4.2 to a GCC 4.4.2 or to ICC?

  - by Nathan Fellman

  The project I'm working with is compiled with GCC 3.4.2. I'm considering switching to a newer compiler. However, the project is at a stage where we're not making any big changes if the risks aren't well known. What sort of problems can I expect when switching compilers? What benefits does GCC 4.x give over GCC 3.4.2? What benefits does ICC give over it?

  Read the article

• Vim navigation clunkiness

  - by Sean Chambers

  I've committed myself to diving into vim to become faster at writing code for ruby/python and I'm having a hard time navigating around files. Mainly, I'm referring to switching between insert mode and navigation modes. Maybe I'm just not completely used to the editor yet but it feels very awkward to constantly be switching in and out of insert mode. Is this something that will go away with time? Are there any tricks to getting quicker at moving in and out of insert mode?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >