Search Results

Search found 1631 results on 66 pages for 'tokyo dan'.

Page 22/66 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Internet problems

  - by dan

  I've got problems on my freshly installed windows Xp machine. I cannot connect to the internet and I've tried various 'solutions' provided to me by the help and support center. Surprisingly none of them worked... Anyways, I've got 3 pc's next to me sharing a lan which is connected to the internet though a modem. The computer I use right now uses windows xp aswell and runs without any problems. I've tried everything on not working computer. I've ran the connection wizard several times, but it's not working :( Also I've very little experience with this version of windows, so I'm sorry if the solution is obvious.

  Read the article

• "killed" message from cron.daily, but not when run from command line

  - by Dan Stahlke

  On Fedora 17, I put a file into /etc/cron.daily with the following contents: cd / su dstahlke /home/dstahlke/bin/anacron-daily.sh exit 0 For some reason, I get a mail every day that just says /etc/cron.daily/dstahlke-daily: ...killed. I tried with and without the exit 0 line above (I noticed that some system scripts have that and others don't, I'm not sure of the purpose). Running /etc/cron.daily/dstahlke-daily from the command line as root produces no ...killed message. Other than the message, everything seems to work fine. Putting set -x in the above script, as well as in the /home/dstahlke/bin/anacron-daily.sh script shows that the ...killed message happens just after the latter script terminates (or perhaps just after the su command finishes). What causes the ...killed message? Or, is there a more acceptable way to have anacron run a user script daily? I figured that putting this in /etc/cron.daily would help the system coordinate all of the daily tasks rather than potentially running my task concurrently with the system tasks.

  Read the article

• Group your tabs feature Firefox: Automatically sort by domain?

  - by Dan

  I'm using Firefox 8.0 and am enjoying the Group your tabs feature: But I'm not always good at keeping it organized. I'm trying to find a way to automatically put certain domains in certain groups. Probably through a plug-in? All the tab related plug-ins just help cluster your tabs together and don't actually work with the "Group your tabs" feature (which is why I posted the picture, to avoid ambiguity, since grouping tabs can refer to a lot of things).

  Read the article

• How to: SSH private key authentication on OS X

  - by dan

  Hi, I need to ssh into a linux box. The server admin gave me a public and private ssh key. When I'm trying to login with the private key the login times out ("Operation timed out"). I'm using this command to login: ssh -v -i /path/to/private_key host What would be the right way to login? Do I need the public key for authentication? Thanks for any help.

  Read the article

• Good Alternative to Cygwin with Copy/Paste?

  - by Dan

  I am annoyed that I can't copy and paste into Cygwin... is there a good alternative to Cygwin that will let me do this? Thanks

  Read the article

• Windows 7 MCE client server HTPC

  - by Dan Hook

  My HTPC is downstairs connected to my large screen. I would like to use my desktop upstairs to record over the air HDTV and stream it to the HTPC. I have Windows 7 Professional installed on the desktop. I currently have XP on the HTPC, but I'm going to upgrade it to Windows 7. Is there a particular flavor of Win 7 I should use? Is it possible to record on the desktop and use Windows MCE on the HTPC to watch the recorded content? What about live TV? The consensus I've seen is that Windows 7 cannot be configured as a Windows Media Center Extender. Is that the case? If so, what's the cheapest solution for an extender?

  Read the article

• FTP Active vs passive mode

  - by Dan

  I have a FTP server and while doing testing I found an odd issue that I don't understand. I send a RETR command on file "/Folder1/file.txt" and it works fine. Then I send a RETR command on file "/Folder1/SubFolder1/file.txt" and it times out on transfering the data to the client. This was in active mode. When I switch to passive mode it works fine. I understand the difference between the two modes, but what I don't understand is why it worked for one file in active mode, but not the other. I tried it a dozen times and still got the same results. Any ideas? Thanks!

  Read the article

• PATH variable recently changed

  - by Dan

  $ loopy Command 'loopy' is available in '/usr/games/loopy' The command could not be located because '/usr/games' is not included in the PATH environment variable. loopy: command not found Every answer I've found just says to add it to my .profile... but this should be be in the PATH for all users, and was up until recently (I have no idea what would have caused it to change). How can I solve this on my system for all users? What could have caused this to change? Thanks.

  Read the article

• How can I make Picasa see changes I make to photos using jhead?

  - by Dan

  Last fall I forgot to set the time on my camera back an hour. I used jhead to change the time in the EXIF data: jhead -ta-1 IMG_1177.JPG but Picasa didn't notice. OS is Windows XP. If I right-click the picture in Picasa and choose Properties, in the top section of the dialog it shows "Date: 3/6/2010 11:22:54 AM" but in the Property|Value section it shows "Camera Date | 2010:03:06 10:22:54". I tried using "Refresh thumbnails" but that didn't help. Picasa notices other changes, like if I edit the photo in the Gimp or change the filename, but for some reason it doesn't notice this change.

  Read the article

• What's the typical latency for key strokes using an ssh connection on a local wifi network?

  - by dan

  I develop software on a Macbook Air 1.6 Ghz but find running Rails test suites and generators on this computer very slow. I'm thinking about buying a Linux tower to put on my local wireless network to do my Rails development on. I would want to use my Macbook Air and ssh into the Linux box and do my development with Gnu Screen, vim, etc. Can I expect the keystroke and echo latency for a ssh session between two machines on a local wireless network to be negligible? Does anyone develop using this kind of local setup?

  Read the article

• Have .cmd in startup wait for system wide startup to run.

  - by Dan

  On a computer I'm not an administrator on, there is a startup file (.cmd file in C:\Documents and Settings\All Users\Start Menu\Programs\Startup) for all users. It does several things I don't like, so I have created my own .cmd file which I have placed in C:\Documents and Settings\[user]\Start Menu\Programs\Startup. I want my code to run after the system wide, because my program first undoes the network mappings the system wide file did, and then replaces it with my own network mappings. How can I make my program wait and start as soon as the system wide one is done? (I cannot remove or edit the system wide file). Thanks EDIT: The time that the system wide file takes to runs varies and I would like my file to run right after. The "If Exists" method seems a little to contingent since the system wide script can change or a file could be moved. I am hoping to give my script to a few of my coworkers, so hoping to have it work without me having to update anything. Also, being a linux guy, I don't know cmd code, so please write out any coding suggestions.

  Read the article

• Server-side SSH jump hosts

  - by Dan Sosedoff

  Trying to figure out server side SSH jump hosts logic. Current network schema: [Client] <--> [Server A: hostname: a.com] <--> [Server B] [Client] <--> [Server A: hostname: b.com] <--> [Server C] Server A responds to both DNS records. Possible flow: Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically jump user onto Server B with ssh user2@server_b.com. Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically just user onto Server C with ssh user2@server_c.com. In other words, client should be able to connect to the target without performing any local configuration, assuming that we have a stock ssh config. The problem with ssh jumps is that user has to define hosts in local ~/.ssh/config file, which is not acceptable in my case. It needs to be a default sshd behavior. Im aware that you can define a custom command ~/.ssh/authorized_keys on server, but i dont think there is a way to properly detect source hostname where user tries to connect. It is possible at all ?

  Read the article

• Ubuntu - wireless connection works great but wired is totally dead

  - by Dan

  I am running Ubuntu 10.04 on my Acer Aspire One netbook. The wireless connection works great, but the wired is totally dead. When I plug the Ethernet wire, the little led next to the port doesn't blink. If I do ifconfig, this is the output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1659 errors:0 dropped:0 overruns:0 frame:0 TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:132304 (132.3 KB) TX bytes:132304 (132.3 KB) wlan0 Link encap:Ethernet HWaddr 18:f4:6a:65:48:1f inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::1af4:6aff:fe65:481f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94823 errors:0 dropped:0 overruns:0 frame:0 TX packets:81390 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:93028474 (93.0 MB) TX bytes:18002558 (18.0 MB) There is no eth0. Is that normal? In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank. How can I make the wired connection work?

  Read the article

• What is an RSS feed? Why would I use one?

  - by Dan Esparza

  Pretty basic question about internet technology: What is an RSS feed? Why would I use one?

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• Converting or playing a .264 video file?

  - by Dan

  I recently bought a Chinese brand DVR (to record security cams). The DVR exports the video files with a ".264" extension. This is my first time ever dealing with this video format. Anyhow I've been trying to convert the videos to any other format so it will be easier to watch the videos. The problem is that I could only find one program that can convert and play those files which is Elecard studio something, and even that Elecard studio thing is having trouble with these files, some of them are just making it crash so I can't convert them. I've tried to find some other programs but I couldn't find anything that can actually play those files. How can I play or convert these files to another format?

  Read the article

• Block ip for long time

  - by Tiziano Dan

  This question is about a iptables, I wanna to know how can I block these ip for 1hour and not only a little time.. because they make to many sql requests, I'm using it for block but it's not enough because there's anyway 100k ip who attack then too much requests for sql server. iptables -N SYN-LIMIT iptables -A SYN-LIMIT -m hashlimit --hashlimit 8/second --hashlimit-mode srcip --hashlimit-name SYN-LIMIT -j RETURN iptables -A SYN-LIMIT -j DROP iptables -I INPUT -p tcp --dport 80 --syn -j SYN-LIMIT iptables -I INPUT -p tcp --dport 80 -m connlimit --connlimit-above 6 -j REJECT --reject-with tcp-reset How can I make the same but block IP for long time ? (Not manually !)

  Read the article

• Can I fine-tune my screen brightness? (Ubuntu Studio, Thinkpad T420s)

  - by Dan S

  I am in a similar situation as question Can I fine-tune my screen brightness? . For me, Thinkpad T420s and Ubuntu Studio 11.10. The brightness keys work fine but the increments are too large. I have the /sys/class/backlight/acpi_video0 and I can see the value of actual_brightness changing as I use the brightness keys - it changes between values 0,3,6,9,12,15. None of the listed answers for fine control works here, as follows: As the root user I can echo integers to brightness in the above folder. As an ordinary user I cannot. I do not have /usr/sbin/gnome-power-backlight-helper (because I'm using xfce perhaps?), and not sure what package it's from or if installing such a package would make sense since it's not what's currently managing the backlight. How can it be done, please?

  Read the article

• Server rack recommendations

  - by Dan

  I'm putting servers on a rack for the first time, and am thinking a 4-post open frame rack is adequate for my needs. I'm putting in a few HP DL 385's and a few other things. What I'm wondering is if there's reason to be picky about the rack selection. I'm not concerned about heat or size - just installation and fit. Any recommendations or considerations?

  Read the article

• LVM Extend... not sure the filesystem

  - by Dan

  I would like to extend my LVM partition. First I did lvextend -L +100G /dev/server/home Now I still have to extend the filesystem. The tutorials tell me to use resize2fs, but that only works for ext2 and ext3. I'm not even sure what filesystem I have... fdisk /dev/server/home/ doesn't work... how do I know what kind of filesystem I have on my lvm partition?

  Read the article

• Essential Business Server

  - by Dan

  We are trying to run the Preparation Wizard for Essential Business Server 2008 and receive the following error. "A list of servers could not be collected from Active Directory Domain Services (AD DS). Ensure that your network is functioning correctly and that this computer can access AD DS." Our network is an Windows Server 2003 network with all of the services running fine. I can't run this from either a machine or a server. Any idea where we should start?

  Read the article

• Copy CakePHP site under IIS webroot?

  - by dan giz

  I've got a CakePHP application that uses a MSSql server running on windows server 2008r2 enterprise using IIS 7.5 My application is the only website running and is installed into wwwroot with cakephp installed to c:\inetpub (one level up from the site) I want to copy this site so i can have a development version to work on, without conflicting with the live site. how do i go about doing this? i'm confused, since previous set ups i've seen have a different folder in wwwroot for the site itself.

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• Troubles doing transparent proxy for virtual machines

  - by Dan H

  Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

  Read the article

• Pin two shortcuts to same application with different settings to taskbar

  - by Dan Neely

  I'd like to have two shortcuts to Visual Studio on my taskbar: one with default settings and a second modified to always run as admin. I know I can manually start a copy with admin rights by right clicking on the shortcut and then right clicking on the name of the application and selecting Run as administrator...; but I'd like to automate the process when I need it (without impeding my ability to start VS without admin rights when I don't need them).

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >