Search Results

Search found 2470 results on 99 pages for 'tx ny ca'.

Page 22/99 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Performance considerations for common SQL queries

  - by Jim Giercyk

  Originally posted on: http://geekswithblogs.net/NibblesAndBits/archive/2013/10/16/performance-considerations-for-common-sql-queries.aspxSQL offers many different methods to produce the same results.  There is a never-ending debate between SQL developers as to the “best way” or the “most efficient way” to render a result set.  Sometimes these disputes even come to blows….well, I am a lover, not a fighter, so I decided to collect some data that will prove which way is the best and most efficient.  For the queries below, I downloaded the test database from SQLSkills:  http://www.sqlskills.com/sql-server-resources/sql-server-demos/.  There isn’t a lot of data, but enough to prove my point: dbo.member has 10,000 records, and dbo.payment has 15,554.  Our result set contains 6,706 records. The following queries produce an identical result set; the result set contains aggregate payment information for each member who has made more than 1 payment from the dbo.payment table and the first and last name of the member from the dbo.member table.   /*************/ /* Sub Query  */ /*************/ SELECT  a.[Member Number] ,         m.lastname ,         m.firstname ,         a.[Number Of Payments] ,         a.[Average Payment] ,         a.[Total Paid] FROM    ( SELECT    member_no 'Member Number' ,                     AVG(payment_amt) 'Average Payment' ,                     SUM(payment_amt) 'Total Paid' ,                     COUNT(Payment_No) 'Number Of Payments'           FROM      dbo.payment           GROUP BY  member_no           HAVING    COUNT(Payment_No) > 1         ) a         JOIN dbo.member m ON a.[Member Number] = m.member_no         /***************/ /* Cross Apply  */ /***************/ SELECT  ca.[Member Number] ,         m.lastname ,         m.firstname ,         ca.[Number Of Payments] ,         ca.[Average Payment] ,         ca.[Total Paid] FROM    dbo.member m         CROSS APPLY ( SELECT    member_no 'Member Number' ,                                 AVG(payment_amt) 'Average Payment' ,                                 SUM(payment_amt) 'Total Paid' ,                                 COUNT(Payment_No) 'Number Of Payments'                       FROM      dbo.payment                       WHERE     member_no = m.member_no                       GROUP BY  member_no                       HAVING    COUNT(Payment_No) > 1                     ) ca /********/                    /* CTEs  */ /********/ ; WITH    Payments           AS ( SELECT   member_no 'Member Number' ,                         AVG(payment_amt) 'Average Payment' ,                         SUM(payment_amt) 'Total Paid' ,                         COUNT(Payment_No) 'Number Of Payments'                FROM     dbo.payment                GROUP BY member_no                HAVING   COUNT(Payment_No) > 1              ),         MemberInfo           AS ( SELECT   p.[Member Number] ,                         m.lastname ,                         m.firstname ,                         p.[Number Of Payments] ,                         p.[Average Payment] ,                         p.[Total Paid]                FROM     dbo.member m                         JOIN Payments p ON m.member_no = p.[Member Number]              )     SELECT  *     FROM    MemberInfo /************************/ /* SELECT with Grouping   */ /************************/ SELECT  p.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         COUNT(Payment_No) 'Number Of Payments' ,         AVG(payment_amt) 'Average Payment' ,         SUM(payment_amt) 'Total Paid' FROM    dbo.payment p         JOIN dbo.member m ON m.member_no = p.member_no GROUP BY p.member_no ,         m.lastname ,         m.firstname HAVING  COUNT(Payment_No) > 1   We can see what is going on in SQL’s brain by looking at the execution plan.  The Execution Plan will demonstrate which steps and in what order SQL executes those steps, and what percentage of batch time each query takes.  SO….if I execute all 4 of these queries in a single batch, I will get an idea of the relative time SQL takes to execute them, and how it renders the Execution Plan.  We can settle this once and for all.  Here is what SQL did with these queries:   Not only did the queries take the same amount of time to execute, SQL generated the same Execution Plan for each of them.  Everybody is right…..I guess we can all finally go to lunch together!  But wait a second, I may not be a fighter, but I AM an instigator.     Let’s see how a table variable stacks up.  Here is the code I executed: /********************/ /*  Table Variable  */ /********************/ DECLARE @AggregateTable TABLE     (       member_no INT ,       AveragePayment MONEY ,       TotalPaid MONEY ,       NumberOfPayments MONEY     ) INSERT  @AggregateTable         SELECT  member_no 'Member Number' ,                 AVG(payment_amt) 'Average Payment' ,                 SUM(payment_amt) 'Total Paid' ,                 COUNT(Payment_No) 'Number Of Payments'         FROM    dbo.payment         GROUP BY member_no         HAVING  COUNT(Payment_No) > 1   SELECT  at.member_no 'Member Number' ,         m.lastname ,         m.firstname ,         at.NumberOfPayments 'Number Of Payments' ,         at.AveragePayment 'Average Payment' ,         at.TotalPaid 'Total Paid' FROM    @AggregateTable at         JOIN dbo.member m ON m.member_no = at.member_no In the interest of keeping things in groupings of 4, I removed the last query from the previous batch and added the table variable query.  Here’s what I got:     Since we first insert into the table variable, then we read from it, the Execution Plan renders 2 steps.  BUT, the combination of the 2 steps is only 22% of the batch.  It is actually faster than the other methods even though it is treated as 2 separate queries in the Execution Plan.  The argument I often hear against Table Variables is that SQL only estimates 1 row for the table size in the Execution Plan.  While this is true, the estimate does not come in to play until you read from the table variable.  In this case, the table variable had 6,706 rows, but it still outperformed the other queries.  People argue that table variables should only be used for hash or lookup tables.  The fact is, you have control of what you put IN to the variable, so as long as you keep it within reason, these results suggest that a table variable is a viable alternative to sub-queries. If anyone does volume testing on this theory, I would be interested in the results.  My suspicion is that there is a breaking point where efficiency goes down the tubes immediately, and it would be interesting to see where the threshold is. Coding SQL is a matter of style.  If you’ve been around since they introduced DB2, you were probably taught a little differently than a recent computer science graduate.  If you have a company standard, I strongly recommend you follow it.    If you do not have a standard, generally speaking, there is no right or wrong answer when talking about the efficiency of these types of queries, and certainly no hard-and-fast rule.  Volume and infrastructure will dictate a lot when it comes to performance, so your results may vary in your environment.  Download the database and try it!

  Read the article

• Removing malware of a particular kind

  - by Cyclone

  I need to remove some malware from my computer. It is a trojan, and very annoying. It blocks access to Google and search sites. The trojan, with its name spelled out on each line cause it seems to block sites when i reference it in a url, is a r t (some text to mess it up) e m (more text i s First off, what is it, what does it do? Second, why can't I access google or yahoo or any other search sites at all? Third, can it be removed via McAffee? It says it quarantined it when I scanned I found a suspicious process "c"s"r"s"s".exe and it will not let me terminate it, and this is what Mcaffee says it is. Why on earth isn't Mcaffee getting rid of it? I even blocked internet access for this program. Thanks so much, I get kinda freaked out with things like this... Here is my entire Hosts file: 127.0.0.1 go.mail.ru 127.0.0.1 nova.rambler.ru 127.0.0.1 google.ad 127.0.0.1 www.google.ad 127.0.0.1 google.ae 127.0.0.1 www.google.ae 127.0.0.1 google.am 127.0.0.1 www.google.am 127.0.0.1 google.com.ar 127.0.0.1 www.google.com.ar 127.0.0.1 google.as 127.0.0.1 www.google.as 127.0.0.1 google.at 127.0.0.1 www.google.at 127.0.0.1 google.com.au 127.0.0.1 www.google.com.au 127.0.0.1 google.az 127.0.0.1 www.google.az 127.0.0.1 google.ba 127.0.0.1 www.google.ba 127.0.0.1 google.be 127.0.0.1 www.google.be 127.0.0.1 google.bg 127.0.0.1 www.google.bg 127.0.0.1 google.bs 127.0.0.1 www.google.bs 127.0.0.1 google.com.by 127.0.0.1 www.google.com.by 127.0.0.1 google.ca 127.0.0.1 www.google.ca 127.0.0.1 google.ch 127.0.0.1 www.google.ch 127.0.0.1 google.cn 127.0.0.1 www.google.cn 127.0.0.1 google.cz 127.0.0.1 www.google.cz 127.0.0.1 google.de 127.0.0.1 www.google.de 127.0.0.1 google.dk 127.0.0.1 www.google.dk 127.0.0.1 google.ee 127.0.0.1 www.google.ee 127.0.0.1 google.es 127.0.0.1 www.google.es 127.0.0.1 google.fi 127.0.0.1 www.google.fi 127.0.0.1 google.fr 127.0.0.1 www.google.fr 127.0.0.1 google.gr 127.0.0.1 www.google.gr 127.0.0.1 google.com.hk 127.0.0.1 www.google.com.hk 127.0.0.1 google.hr 127.0.0.1 www.google.hr 127.0.0.1 google.hu 127.0.0.1 www.google.hu 127.0.0.1 google.ie 127.0.0.1 www.google.ie 127.0.0.1 google.co.il 127.0.0.1 www.google.co.il 127.0.0.1 google.co.in 127.0.0.1 www.google.co.in 127.0.0.1 google.is 127.0.0.1 www.google.is 127.0.0.1 google.it 127.0.0.1 www.google.it 127.0.0.1 google.co.jp 127.0.0.1 www.google.co.jp 127.0.0.1 google.kg 127.0.0.1 www.google.kg 127.0.0.1 google.co.kr 127.0.0.1 www.google.co.kr 127.0.0.1 google.li 127.0.0.1 www.google.li 127.0.0.1 google.lt 127.0.0.1 www.google.lt 127.0.0.1 google.lu 127.0.0.1 www.google.lu 127.0.0.1 google.lv 127.0.0.1 www.google.lv 127.0.0.1 google.md 127.0.0.1 www.google.md 127.0.0.1 google.com.mx 127.0.0.1 www.google.com.mx 127.0.0.1 google.nl 127.0.0.1 www.google.nl 127.0.0.1 google.no 127.0.0.1 www.google.no 127.0.0.1 google.co.nz 127.0.0.1 www.google.co.nz 127.0.0.1 google.com.pe 127.0.0.1 www.google.com.pe 127.0.0.1 google.com.ph 127.0.0.1 www.google.com.ph 127.0.0.1 google.pl 127.0.0.1 www.google.pl 127.0.0.1 google.pt 127.0.0.1 www.google.pt 127.0.0.1 google.ro 127.0.0.1 www.google.ro 127.0.0.1 google.ru 127.0.0.1 www.google.ru 127.0.0.1 google.com.ru 127.0.0.1 www.google.com.ru 127.0.0.1 google.com.sa 127.0.0.1 www.google.com.sa 127.0.0.1 google.se 127.0.0.1 www.google.se 127.0.0.1 google.com.sg 127.0.0.1 www.google.com.sg 127.0.0.1 google.si 127.0.0.1 www.google.si 127.0.0.1 google.sk 127.0.0.1 www.google.sk 127.0.0.1 google.co.th 127.0.0.1 www.google.co.th 127.0.0.1 google.com.tj 127.0.0.1 www.google.com.tj 127.0.0.1 google.tm 127.0.0.1 www.google.tm 127.0.0.1 google.com.tr 127.0.0.1 www.google.com.tr 127.0.0.1 google.com.tw 127.0.0.1 www.google.com.tw 127.0.0.1 google.com.ua 127.0.0.1 www.google.com.ua 127.0.0.1 google.co.uk 127.0.0.1 www.google.co.uk 127.0.0.1 google.co.vi 127.0.0.1 www.google.co.vi 127.0.0.1 google.com 127.0.0.1 www.google.com 127.0.0.1 google.us 127.0.0.1 www.google.us 127.0.0.1 google.com.pl 127.0.0.1 www.google.com.pl 127.0.0.1 google.co.hu 127.0.0.1 www.google.co.hu 127.0.0.1 google.ge 127.0.0.1 www.google.ge 127.0.0.1 google.kz 127.0.0.1 www.google.kz 127.0.0.1 google.co.uz 127.0.0.1 www.google.co.uz 127.0.0.1 bing.com 127.0.0.1 www.bing.com 127.0.0.1 search.yahoo.com 127.0.0.1 ca.search.yahoo.com 127.0.0.1 ar.search.yahoo.com 127.0.0.1 cl.search.yahoo.com 127.0.0.1 co.search.yahoo.com 127.0.0.1 mx.search.yahoo.com 127.0.0.1 espanol.search.yahoo.com 127.0.0.1 qc.search.yahoo.com 127.0.0.1 ve.search.yahoo.com 127.0.0.1 pe.search.yahoo.com 127.0.0.1 at.search.yahoo.com 127.0.0.1 ct.search.yahoo.com 127.0.0.1 dk.search.yahoo.com 127.0.0.1 fi.search.yahoo.com 127.0.0.1 fr.search.yahoo.com 127.0.0.1 de.search.yahoo.com 127.0.0.1 it.search.yahoo.com 127.0.0.1 nl.search.yahoo.com 127.0.0.1 no.search.yahoo.com 127.0.0.1 ru.search.yahoo.com 127.0.0.1 es.search.yahoo.com 127.0.0.1 se.search.yahoo.com 127.0.0.1 ch.search.yahoo.com 127.0.0.1 uk.search.yahoo.com 127.0.0.1 asia.search.yahoo.com 127.0.0.1 au.search.yahoo.com 127.0.0.1 one.cn.yahoo.com 127.0.0.1 hk.search.yahoo.com 127.0.0.1 in.search.yahoo.com 127.0.0.1 id.search.yahoo.com 127.0.0.1 search.yahoo.co.jp 127.0.0.1 kr.search.yahoo.com 127.0.0.1 malaysia.search.yahoo.com 127.0.0.1 nz.search.yahoo.com 127.0.0.1 ph.search.yahoo.com 127.0.0.1 sg.search.yahoo.com 127.0.0.1 tw.search.yahoo.com 127.0.0.1 th.search.yahoo.com 127.0.0.1 vn.search.yahoo.com 127.0.0.1 images.google.com 127.0.0.1 images.google.ca 127.0.0.1 images.google.co.uk 127.0.0.1 news.google.com 127.0.0.1 news.google.ca 127.0.0.1 news.google.co.uk 127.0.0.1 video.google.com 127.0.0.1 video.google.ca 127.0.0.1 video.google.co.uk 127.0.0.1 blogsearch.google.com 127.0.0.1 blogsearch.google.ca 127.0.0.1 blogsearch.google.co.uk 127.0.0.1 searchservice.myspace.com 127.0.0.1 ask.com 127.0.0.1 www.ask.com 127.0.0.1 search.aol.com 127.0.0.1 search.netscape.com 127.0.0.1 yandex.ru 127.0.0.1 www.yandex.ru 127.0.0.1 yandex.ua 127.0.0.1 www.yandex.ua 127.0.0.1 search.about.com 127.0.0.1 www.verizon.net 127.0.0.1 verizon.net

  Read the article

• Backtracking Problem

  - by Joshua Green

  Could someone please guide me through backtracking in Prolog-C using the simple example below? Here is my Prolog file: likes( john, mary ). likes( john, emma ). likes( john, ashley ). Here is my C file: #include... term_t tx; term_t tv; term_t goal_term; functor_t goal_functor; int main( int argc, char** argv ) { argv[0] = "libpl.dll"; PL_initialise( argc, argv ); PlCall( "consult( swi( 'plwin.rc' ) )" ); PlCall( "consult( 'likes.pl' )" ); tv = PL_new_term_ref( ); PL_put_atom_chars( tv, "john" ); tx = PL_new_term_ref( ); goal_term = PL_new_term_ref( ); goal_functor = PL_new_functor( PL_new_atom( "likes" ), 2 ); PL_cons_functor( goal_term, goal_functor, tv, tx ); PlQuery q( "likes", ??? ); while ( q.next_solution( ) ) { char* solution; PL_get_atom_chars( tx, &solution ); cout << solution << endl; } PL_halt( PL_toplevel() ? 0 : 1 ); } What should I replace ??? with? Or is this the right approach to get all the backtracking results generated and printed? Thank you,

  Read the article

• argv Memory Allocation

  - by Joshua Green

  I was wondering if someone could tell me what I am doing wrong that I get this Unhandled Exception error message: 0xC0000005: Access violation reading location 0x0000000c. with a green pointer pointing at my first Prolog code (fid_t): Here is my header file: class UserTaskProlog { public: UserTaskProlog( ArRobot* r ); ~UserTaskProlog( ); protected: int cycles; char* argv[ 1 ]; term_t tf; term_t tx; term_t goal_term; functor_t goal_functor; ArRobot* robot; void logTask( ); }; And here is my main code: UserTaskProlog::UserTaskProlog( ArRobot* r ) : robot( r ), robotTaskFunc( this, &UserTaskProlog::logTask ) { cycles = 0; argv[ 0 ] = "libpl.dll"; argv[ 1 ] = NULL; PL_initialise( 1, argv ); PlCall( "consult( 'myPrologFile.pl' )" ); robot->addSensorInterpTask( "UserTaskProlog", 50, &robotTaskFunc ); } UserTaskProlog::~UserTaskProlog( ) { robot->remSensorInterpTask( &robotTaskFunc ); } void UserTaskProlog::logTask( ) { cycles++; fid_t fid = PL_open_foreign_frame( ); tf = PL_new_term_ref( ); PL_put_integer( tf, 5 ); tx = PL_new_term_ref( ); goal_term = PL_new_term_ref( ); goal_functor = PL_new_functor( PL_new_atom( "factorial" ), 2 ); PL_cons_functor( goal_term, goal_functor, tf, tx ); int fact; if ( PL_call( goal_term, NULL ) ) { PL_get_integer( tx, &fact ); cout << fact << endl; } PL_discard_foreign_frame( fid ); } int main( int argc, char** argv ) { ArRobot robot; ArArgumentParser argParser( &argc, argv ); UserTaskProlog talk( &robot ); } Thank you,

  Read the article

• Websql to google maps markers

  - by Roy van Neden

  I am busy with my web application for a school project. It has has two pages. The first page uploads the location(latitude and longitude), price, date and kind of fuel. It works and i saved it with websql.(see screenshot) Now i want to get everything out of the web database and put it as a marker on my google maps card. I have my own location already. But i dont know how to get everything from the database to the map as a marker. I'm using jquery mobile/html5/css/javascript only. Code to put it in a array or something else that will work. db.transaction(function(tx){ tx.executeSql('SELECT brandstofsoort, literprijs, datum, latitude, longitude FROM brandstofstatus', [], function (tx, results) { var lengte = results.rows.length, i; for(var i = 0; i< lengte; i++){ var locations = [ [ ], [ ], [ ], [ ], [ ] ]; } // / for loop });// /tx.executeSql });// /db.transaction Thanks in advance!

  Read the article

• How do I do nested transactions in NHibernate?

  - by Gavin Schultz-Ohkubo

  Can I do nested transactions in NHibernate, and how do I implement them? I'm using SQL Server 2008, so support is definitely in the DBMS. I find that if I try something like this: using (var outerTX = UnitOfWork.Current.BeginTransaction()) { using (var nestedTX = UnitOfWork.Current.BeginTransaction()) { ... do stuff nestedTX.Commit(); } outerTX.Commit(); } then by the time it comes to outerTX.Commit() the transaction has become inactive, and results in a ObjectDisposedException on the session AdoTransaction. Are we therefore supposed to create nested NHibernate sessions instead? Or is there some other class we should use to wrap around the transactions (I've heard of TransactionScope, but I'm not sure what that is)? I'm now using Ayende's UnitOfWork implementation (thanks Sneal). Forgive any naivety in this question, I'm still new to NHibernate. Thanks! EDIT: I've discovered that you can use TransactionScope, such as: using (var transactionScope = new TransactionScope()) { using (var tx = UnitOfWork.Current.BeginTransaction()) { ... do stuff tx.Commit(); } using (var tx = UnitOfWork.Current.BeginTransaction()) { ... do stuff tx.Commit(); } transactionScope.Commit(); } However I'm not all that excited about this, as it locks us in to using SQL Server, and also I've found that if the database is remote then you have to worry about having MSDTC enabled... one more component to go wrong. Nested transactions are so useful and easy to do in SQL that I kind of assumed NHibernate would have some way of emulating the same...

  Read the article

• NHibernate unintential lazy property loading

  - by chiccodoro

  I introduced a mapping for a business object which has (among others) a property called "Name": public class Foo : BusinessObjectBase { ... public virtual string Name { get; set; } } For some reason, when I fetch "Foo" objects, NHibernate seems to apply lazy property loading (for simple properties, not associations): The following code piece generates n+1 SQL statements, whereof the first only fetches the ids, and the remaining n fetch the Name for each record: ISession session = ...IQuery query = session.CreateQuery(queryString); ITransaction tx = session.BeginTransaction(); List<Foo> result = new List<Foo>(); foreach (Foo foo in query.Enumerable()) { result.Add(foo); } tx.Commit(); session.Close(); produces: NHibernate: select foo0_.FOO_ID as col_0_0_ from V1_FOO foo0_ NHibernate: SELECT foo0_.FOO_ID as FOO1_2_0_, foo0_.NAME as NAME2_0_ FROM V1_FOO foo0_ WHERE foo0_.FOO_ID=:p0;:p0 = 81 NHibernate: SELECT foo0_.FOO_ID as FOO1_2_0_, foo0_.NAME as NAME2_0_ FROM V1_FOO foo0_ WHERE foo0_.FOO_ID=:p0;:p0 = 36470 NHibernate: SELECT foo0_.FOO_ID as FOO1_2_0_, foo0_.NAME as NAME2_0_ FROM V1_FOO foo0_ WHERE foo0_.FOO_ID=:p0;:p0 = 36473 Similarly, the following code leads to a LazyLoadingException after session is closed: ISession session = ... ITransaction tx = session.BeginTransaction(); Foo result = session.Load<Foo>(id); tx.Commit(); session.Close(); Console.WriteLine(result.Name); Following this post, "lazy properties ... is rarely an important feature to enable ... (and) in Hibernate 3, is disabled by default." So what am I doing wrong? I managed to work around the LazyLoadingException by doing a NHibernateUtil.Initialize(foo) but the even worse part are the n+1 sql statements which bring my application to its knees. This is how the mapping looks like: <class name="Foo" table="V1_FOO"> ... <property name="Name" column="NAME"/> </class> BTW: The abstract "BusinessObjectBase" base class encapsulates the ID property which serves as the internal identifier.

  Read the article

• Regular expression to Match addresses

  - by Burfi

  I have below set of strings to be searched : 1Dept Neurosci, The Univ. of New Mexico, ALBUQUERQUE, NM; 2Mol. and Human Genet., Baylor Col. of Med., Houston,, TX; 3Psychiatry, Univ. of Texas Southwestern Med. Ctr., Dallas, TX; 4Clin. Genet., Erasmus Univ. Med. Ctr., Rotterdam, Netherlands; 5Human Genet., Emory Univ., Atlanta, GA Above is a set of addresses , which starts with a digit (used to link it to the person).Need to search all the address as : 1Dept Neurosci, The Univ. of New Mexico, ALBUQUERQUE, NM 2Mol. and Human Genet., Baylor Col. of Med., Houston,, TX 3Psychiatry, Univ. of Texas Southwestern Med. Ctr., Dallas, TX 4Clin. Genet., ErasmusUniv. Med. Ctr., Rotterdam, Netherlands 5Human Genet., Emory Univ.Atlanta, GA I have written the below Regex : \d\w+,* It only matches a digit followed by a word . How can I modify it .Please suggest is there any better way.

  Read the article

• Array, change color, as3

  - by pixelGreaser

  Hi Thanks for the help Yesterday, but I have on more question. How can I change color of text on certain words? My animation plays the text animation of THIS SALE IS RED HOT!!! I want RED HOT it to be red. It seems the array can be indexed in such a way to switch the color from Blue to Red. MY BANNER ADD var myArray:Array = ["THIS","SALE","IS","RED HOT!!!",]; var tm:Timer = new Timer(500); tm.addEventListener(TimerEvent.TIMER, countdown); function countdown(event:TimerEvent) { tx.text = myArray[(tm.currentCount-1)%myArray.length]; } tm.start(); tx.textColor = 0x0000FF; Cont...PSEUDO CODE //var myArray:Array = ["This","Sale","is","RED HOT!!!",]; var spliceRedhot = myArray.splice(-1); //trace(myArray[2]); trace(spliceRedhot); function mySplice(e:Event):void{ if (spliceRedhot = 4){ //Make RED HOT!!! red tx.textColor = 0xFF0000; } else{ //Text is Blue again tx.textColor = 0x0000FF; } }

  Read the article

• Instruments memory leak iphone

  - by dubbeat

  Hi, I posted this problem a few days ago but it was very muddled and my question wasnt very clear so I removed it. I've been digging around and the memory leak is still persiting. Hopefully this attempt will be clearer. First off I've run the static analyzer and it reports no memory leaks. I then ran Instruments and it pointed to a memory leak at this line of code. As far as I can see there is no memory leak. featured=[[UILabel alloc]initWithFrame:CGRectMake(130,15, 200, 15)]; //[featured setFont:[UIFont UIFontboldSystemFontOfSize:20]]; featured.font = [UIFont boldSystemFontOfSize:20]; featured.backgroundColor= [UIColor clearColor]; featured.textColor=[UIColor blackColor]; featured.text= @"Featured Promo"; [self.view addSubview:featured]; [featured release]; featured=nil; If I comment out the above code Instruments reports another memory leak in another block of code where there is no discernible leak. UIButton *populartbutton = [[UIButton buttonWithType:UIButtonTypeRoundedRect]]; populartbutton.frame = CGRectMake(112, 145, 90, 22); // size and position of button [populartbutton setTitle:@"Popular" forState:UIControlStateNormal]; populartbutton.backgroundColor = [UIColor clearColor]; populartbutton.adjustsImageWhenHighlighted = YES; [populartbutton addTarget:self action:@selector(getpopular:) forControlEvents:UIControlEventTouchUpInside]; [self.view addSubview:populartbutton]; Instruments also says Responsible Library = Core Graphics Responsible Frame = open_handle_to_dylib_path This Is the stack trace. 53 Promo start 52 Promo main /Users/..2/main.m:14 51 UIKit UIApplicationMain 50 UIKit -[UIApplication _run] 49 CoreFoundation CFRunLoopRunInMode 48 CoreFoundation CFRunLoopRunSpecific 47 GraphicsServices PurpleEventCallback 46 UIKit _UIApplicationHandleEvent 45 UIKit -[UIApplication sendEvent:] 44 UIKit -[UIApplication handleEvent:withNewEvent:] 43 UIKit -[UIApplication _reportAppLaunchFinished] 42 QuartzCore CA::Transaction::commit() 41 QuartzCore CA::Context::commit_transaction(CA::Transaction*) 40 QuartzCore CALayerLayoutIfNeeded 39 QuartzCore -[CALayer layoutSublayers] 38 UIKit -[UILayoutContainerView layoutSubviews] 37 UIKit -[UINavigationController _startDeferredTransitionIfNeeded] 36 UIKit -[UINavigationController _startTransition:fromViewController:toViewController:] 35 UIKit -[UINavigationController _layoutViewController:] 34 UIKit -[UINavigationController_computeAndApplyScrollContentInsetDeltaForViewController:] 33 UIKit -[UIViewController contentScrollView] 32 UIKit -[UIViewController view] 31 Promo -[FeaturedLevelViewController viewDidLoad] /Users/..s/FeaturedLevelViewController.m:67 // THIS IS MY CLASS WHERE THE CODE SAMPLES ABOVE ARE FROM 30 UIKit -[UILabel initWithFrame:] 29 UIKit -[UILabel _commonInit] 28 UIKit +[UILabel defaultFont] 27 UIKit +[UIFont systemFontOfSize:] 26 GraphicsServices GSFontCreateWithName 25 CoreGraphics CGFontCreateWithName 24 CoreGraphics CGFontCreateWithFontName 23 CoreGraphics CGFontFinderGetDefault 22 CoreGraphics CGFontGetVTable 21 libSystem.B.dylib pthread_once 20 CoreGraphics load_vtable 19 CoreGraphics load_library 18 CoreGraphics CGLibraryLoadFunction 17 CoreGraphics load_function 16 CoreGraphics open_handle_to_dylib_path 15 libSystem.B.dylib dlopen 14 dyld dlopen 13 dyld dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) 12 dyld ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) 11 dyld ImageLoader::recursiveLoadLibraries(ImageLoader::LinkContext const&, bool, ImageLoader::RPathChain const&) 10 dyld dyld::libraryLocator(char const*, bool, char const*, ImageLoader::RPathChain const*) 9 dyld dyld::load(char const*, dyld::LoadContext const&) 8 dyld dyld::loadPhase0(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 7 dyld dyld::loadPhase1(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 6 dyld dyld::loadPhase3(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 5 dyld dyld::loadPhase4(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 4 dyld dyld::loadPhase5(char const*, dyld::LoadContext const&, std::vector<char const*, std::allocator<char const*> >*) 3 dyld dyld::mkstringf(char const*, ...) 2 dyld strdup 1 dyld malloc 0 libSystem.B.dylib malloc I'm really not too sure how to use this information to fix the problem so any guidance would be appreciated. Perhaps the answer is in the trace but I just don't know what to look for? EDIT:: The above stack trace is when running on the simulator. The following is from running on a device. This trace does not point to any of my own classes 23 Promo 0x0 22 libSystem.B.dylib _pthread_body 21 Foundation __NSThread__main__ 20 Foundation +[NSThread exit] 19 libSystem.B.dylib _pthread_exit 18 libSystem.B.dylib _pthread_tsd_cleanup 17 QuartzCore CA::Transaction::release_thread(void*) 16 QuartzCore CA::Transaction::commit() 15 QuartzCore CA::Context::commit_transaction(CA::Transaction*) 14 QuartzCore CALayerDisplayIfNeeded 13 QuartzCore -[CALayer display] 12 QuartzCore -[CALayer _display] 11 QuartzCore CABackingStoreUpdate 10 QuartzCore backing_callback(CGContext*, void*) 9 QuartzCore -[CALayer drawInContext:] 8 UIKit -[UIView(CALayerDelegate) drawLayer:inContext:] 7 UIKit -[UILabel drawRect:] 6 UIKit -[UILabel drawTextInRect:] 5 UIKit -[UILabel _drawTextInRect:baselineCalculationOnly:] 4 UIKit -[NSString(UIStringDrawing) drawAtPoint:forWidth:withFont:lineBreakMode:] 3 UIKit -[NSString(UIStringDrawing) drawAtPoint:forWidth:withFont:lineBreakMode:letterSpacing:includeEmoji:] 2 WebCore WKSetCurrentGraphicsContext 1 WebCore CurrentThreadContext() 0 libSystem.B.dylib calloc

  Read the article

• Is there a way I can filter traffic by page-type based upon URL structure in Google-Analytics or Google Webmaster Tools?

  - by Felix

  I have a local business directory site. I'm trying to segment my incoming traffic by page-type such that I can find out what percentage of traffic is going to zip code pages exclusively and what percentage is going to city/state level pages. I basically want to filter by URL structure to find out what percentage of total traffic zip code pages account for. The reason for doing this is to find out if Google Tag Manager can help with this? Here are the two URL paths: http://www.example.com/ny/new-york/10011/ http://www.example.com/ny/new-york

  Read the article

• Is there a way I can sort traffic by page-type based upon URL structure in Google-Analytics or Google Webmaster Tools??

  - by Felix

  I have a local business directory site. I'm trying to segment my incoming traffic by page-type such that i can find out what percentage of traffic is going to zip code pages exclusively and what percentage is going to city/state level pages. I basically want to filter by URL structure to find out what percentage of total traffic zip code pages account for. The reason for doing this is to find out if Does Google Tag Manager help with this? Here are the two URL paths: http://www.example.com/ny/new-york/10011/ http://www.example.com/ny/new-york Thanks all!

  Read the article

• Cannot create Java VM on OpenVZ

  - by Stephen Searles

  I'm constantly encountering an error related to Java and certificates on my Ubuntu server running in OpenVZ when installing things from apt-get. I'm pretty sure it has to do with how Java allocates memory. I know the fail counter for privvmpages is very high, so the problem must be that Java is hitting this limit. I have read that the server VM will allocate a lot of memory up front to preempt performance issues, but that the client VM doesn't do this and might be better for what I'm doing. I messed with jvm.cfg to make the system go to the client VM, but get an error that it can't find the client VM. I have tried replacing the Java binary with a script calling Java with -Xms and -Xmx settings, and that solves the issue for when I call basic things from the command line, but not for when doing things like having apt-get configure certificates. I'm at a loss for what to try next. I need to get this working, but simply increasing privvmpages is not an available option. I have the actual error pasted below. Setting up ca-certificates-java (20100412) ... creating /etc/ssl/certs/java/cacerts... Could not create the Java virtual machine. error adding brasil.gov.br/brasil.gov.br.crt error adding cacert.org/cacert.org.crt error adding debconf.org/ca.crt error adding gouv.fr/cert_igca_dsa.crt error adding gouv.fr/cert_igca_rsa.crt error adding mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt error adding mozilla/AddTrust_External_Root.crt error adding mozilla/AddTrust_Low-Value_Services_Root.crt error adding mozilla/AddTrust_Public_Services_Root.crt error adding mozilla/AddTrust_Qualified_Certificates_Root.crt error adding mozilla/America_Online_Root_Certification_Authority_1.crt error adding mozilla/America_Online_Root_Certification_Authority_2.crt error adding mozilla/Baltimore_CyberTrust_Root.crt error adding mozilla/COMODO_Certification_Authority.crt error adding mozilla/COMODO_ECC_Certification_Authority.crt error adding mozilla/Camerfirma_Chambers_of_Commerce_Root.crt error adding mozilla/Camerfirma_Global_Chambersign_Root.crt error adding mozilla/Certplus_Class_2_Primary_CA.crt error adding mozilla/Certum_Root_CA.crt error adding mozilla/Comodo_AAA_Services_root.crt error adding mozilla/Comodo_Secure_Services_root.crt error adding mozilla/Comodo_Trusted_Services_root.crt error adding mozilla/DST_ACES_CA_X6.crt error adding mozilla/DST_Root_CA_X3.crt error adding mozilla/DigiCert_Assured_ID_Root_CA.crt error adding mozilla/DigiCert_Global_Root_CA.crt error adding mozilla/DigiCert_High_Assurance_EV_Root_CA.crt Could not create the Java virtual machine. error adding mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt error adding mozilla/Entrust.net_Global_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Global_Secure_Server_CA.crt error adding mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt error adding mozilla/Entrust.net_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Secure_Server_CA.crt error adding mozilla/Entrust_Root_Certification_Authority.crt error adding mozilla/Equifax_Secure_CA.crt error adding mozilla/Equifax_Secure_Global_eBusiness_CA.crt error adding mozilla/Equifax_Secure_eBusiness_CA_1.crt error adding mozilla/Equifax_Secure_eBusiness_CA_2.crt error adding mozilla/Firmaprofesional_Root_CA.crt error adding mozilla/GTE_CyberTrust_Global_Root.crt error adding mozilla/GTE_CyberTrust_Root_CA.crt error adding mozilla/GeoTrust_Global_CA.crt error adding mozilla/GeoTrust_Global_CA_2.crt error adding mozilla/GeoTrust_Primary_Certification_Authority.crt error adding mozilla/GeoTrust_Universal_CA.crt error adding mozilla/GeoTrust_Universal_CA_2.crt error adding mozilla/GlobalSign_Root_CA.crt error adding mozilla/GlobalSign_Root_CA_-_R2.crt error adding mozilla/Go_Daddy_Class_2_CA.crt error adding mozilla/IPS_CLASE1_root.crt error adding mozilla/IPS_CLASE3_root.crt error adding mozilla/IPS_CLASEA1_root.crt error adding mozilla/IPS_CLASEA3_root.crt error adding mozilla/IPS_Chained_CAs_root.crt error adding mozilla/IPS_Servidores_root.crt error adding mozilla/IPS_Timestamping_root.crt error adding mozilla/NetLock_Business_=Class_B=_Root.crt error adding mozilla/NetLock_Express_=Class_C=_Root.crt error adding mozilla/NetLock_Notary_=Class_A=_Root.crt error adding mozilla/NetLock_Qualified_=Class_QA=_Root.crt error adding mozilla/Network_Solutions_Certificate_Authority.crt error adding mozilla/QuoVadis_Root_CA.crt error adding mozilla/QuoVadis_Root_CA_2.crt error adding mozilla/QuoVadis_Root_CA_3.crt error adding mozilla/RSA_Root_Certificate_1.crt error adding mozilla/RSA_Security_1024_v3.crt error adding mozilla/RSA_Security_2048_v3.crt error adding mozilla/SecureTrust_CA.crt error adding mozilla/Secure_Global_CA.crt error adding mozilla/Security_Communication_Root_CA.crt error adding mozilla/Sonera_Class_1_Root_CA.crt error adding mozilla/Sonera_Class_2_Root_CA.crt error adding mozilla/Staat_der_Nederlanden_Root_CA.crt error adding mozilla/Starfield_Class_2_CA.crt error adding mozilla/StartCom_Certification_Authority.crt error adding mozilla/StartCom_Ltd..crt error adding mozilla/SwissSign_Gold_CA_-_G2.crt error adding mozilla/SwissSign_Platinum_CA_-_G2.crt error adding mozilla/SwissSign_Silver_CA_-_G2.crt error adding mozilla/Swisscom_Root_CA_1.crt error adding mozilla/TC_TrustCenter__Germany__Class_2_CA.crt error adding mozilla/TC_TrustCenter__Germany__Class_3_CA.crt error adding mozilla/TDC_Internet_Root_CA.crt error adding mozilla/TDC_OCES_Root_CA.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt error adding mozilla/Taiwan_GRCA.crt error adding mozilla/Thawte_Personal_Basic_CA.crt error adding mozilla/Thawte_Personal_Freemail_CA.crt error adding mozilla/Thawte_Personal_Premium_CA.crt error adding mozilla/Thawte_Premium_Server_CA.crt error adding mozilla/Thawte_Server_CA.crt error adding mozilla/Thawte_Time_Stamping_CA.crt error adding mozilla/UTN-USER_First-Network_Applications.crt error adding mozilla/UTN_DATACorp_SGC_Root_CA.crt error adding mozilla/UTN_USERFirst_Email_Root_CA.crt error adding mozilla/UTN_USERFirst_Hardware_Root_CA.crt error adding mozilla/ValiCert_Class_1_VA.crt error adding mozilla/ValiCert_Class_2_VA.crt error adding mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_RSA_Secure_Server_CA.crt error adding mozilla/Verisign_Time_Stamping_Authority_CA.crt error adding mozilla/Visa_International_Global_Root_2.crt error adding mozilla/Visa_eCommerce_Root.crt error adding mozilla/WellsSecure_Public_Root_Certificate_Authority.crt error adding mozilla/Wells_Fargo_Root_CA.crt error adding mozilla/XRamp_Global_CA_Root.crt error adding mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt error adding mozilla/beTRUSTed_Root_CA.crt error adding mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt error adding mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt error adding mozilla/thawte_Primary_Root_CA.crt error adding signet.pl/signet_ca1_pem.crt error adding signet.pl/signet_ca2_pem.crt error adding signet.pl/signet_ca3_pem.crt error adding signet.pl/signet_ocspklasa2_pem.crt error adding signet.pl/signet_ocspklasa3_pem.crt error adding signet.pl/signet_pca2_pem.crt error adding signet.pl/signet_pca3_pem.crt error adding signet.pl/signet_rootca_pem.crt error adding signet.pl/signet_tsa1_pem.crt error adding spi-inc.org/spi-ca-2003.crt error adding spi-inc.org/spi-cacert-2008.crt error adding telesec.de/deutsche-telekom-root-ca-2.crt failed (VM used: java-6-openjdk). dpkg: error processing ca-certificates-java (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ca-certificates-java E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Certificate Authority issuing Basic EFS certificates without Autoenroll

  - by James Jones

  We have observed some puzzling behavior from the CAs we have set up in both the past and present. For some reason unknown to us, it seems that our CAs are randomly issuing "Basic EFS" certificates to our users. This is evident through the "Issued Certificates" log on the CA. I personally set up a CA yesterday, and the instant that I installed certificate services it started dishing out Basic EFS certs to our users. They seem to be issued at random times: 1:51am, 2:20am, then 7:54am, then 8:03am... etc I looked at the certificate template for Basic EFS and there isn't even an option for Autoenrollment, so I'm seriously in a state of "WTF?!"... Can anyone clue me in as to why my CA has a mind of its own? Do CAs tend to become self-aware and lash out at their owners? Please help...

  Read the article

• preparing to migrate MOSS 2007 SP1 content into new server with MOSS 2007 SP2 with the same server n

  - by Albert Widjaja

  To All Experts here, I'd like to perform a MOSS server content migration from the existing single instance server (SQL Server 2008, Windows Server 2008, SharePoint 2007 SP1) all in one and by maintaining the server name only, here's what I had in my migration plan document outline: I have created the new Windows Server 2008 R2 + SQL Server 2008 SP1 and MOSS 2007 SP2 after that: Backup MOSS_ContentDB from SQL Server 2008 SSMS (does this enough to cover all top level sites and its content in the library and doc. repository ?) Backup all top level sites from CA site using the CA Sites backup and restore tools. turn off the old MOSSDEV01 (current server) rename the existing server (TempServ01) into MOSSDEV01 (so that the user bookmark and other link inside MOSS site still working) perform restore of the DB restore the site collection and its content from the backup is that the correct way to do it ? I haven't execute the server configuration wizard to create the same port number of the SSP, CA and the SQL Server DB yet. Any idea and suggestion would be greatly appreciated Thanks.

  Read the article

• Certificate Template Missing from "Certificate Template to Issue"

  - by Adam Robinson

  I'm having a problem similar to that posted in this question: Missing Certificate template From certificate to issue The short version is that I've created a duplicate certificate template and I'm trying to add it to my domain CA so that I can issue certificates with it. However, when I go into the Certification Authority MMC and go to "Certificate Templates - New - Certificate Template To Issue", my template is missing (along with quite a number of other templates that are present in the domain). Unlike the previous question, however, my CA is running on Server 2008 R2 Enterprise. Our organization has a single DC and a single CA, so I'm not seeing where there could be propagation delay. Any ideas how to get my template to show so that I can issue certificates?

  Read the article

• How can I track down what part of pfsense is blocking website access?

  - by Chase Florell

  I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

  Read the article

• Generating SSL certificates

  - by user73483

  Hi, I was wondering if anyone has any idea in how to generate a signed CA cert and key using openssl? I have found this website (http://dev.mysql.com/doc/refman/5.1/en/secure-create-certs.html) to generate the client and server certs for mysql server but the example is a self-signed certificate. I use the following command for running the server and client using openssl and the generated certs and keys: openssl s_server -accept 6502 -cert server-cert.pem -key server-key.pem -CAfile ca-cert.pem -www openssl s_client -connect 192.168.1.92:6502 -cert client-cert.pem -key client-key.pem -CAfile ca-cert.pem The error output I get is "Verify return code: 18 (self signed certificate)". Paul

  Read the article

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• Relay Access Denied (State 13) Postfix + Dovecot + Mysql

  - by Pierre Jeptha

  So we have been scratching our heads for quite some time over this relay issue that has presented itself since we re-built our mail-server after a failed Webmin update. We are running Debian Karmic with postfix 2.6.5 and Dovecot 1.1.11, sourcing from a Mysql database and authenticating with SASL2 and PAM. Here are the symptoms of our problem: 1) When users are on our local network they can send and receive 100% perfectly fine. 2) When users are off our local network and try to send to domains not of this mail server (ie. gmail) they get the "Relay Access Denied" error. However users can send to domains of this mail server when off the local network fine. 3) We host several virtual domains on this mailserver, the primary domain being airnet.ca. The rest of our virtual domains (ex. jeptha.ca) cannot receive email from domains not hosted by this mailserver (ie. gmail and such cannot send to them). They receive bounce backs of "Relay Access Denied (State 13)". This is regardless of whether they are on our local network or not, which is why it is so urgent for us to get this solved. Here is our main.cf from postfix: myhostname = mail.airnet.ca mydomain = airnet.ca smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no smtpd_sasl_type = dovecot queue_directory = /var/spool/postfix smtpd_sasl_path = private/auth smtpd_sender_restrictions = permit_mynetworks permit_sasl_authenticated smtp_sasl_auth_enable = yes smtpd_sasl_auth_enable = yes append_dot_mydomain = no readme_directory = no smtp_tls_security_level = may smtpd_tls_security_level = may smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_auth_only = no alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mail.airnet.ca, airnet.ca, localhost.$mydomain mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + local_recipient_maps = $alias_maps $virtual_mailbox_maps proxy:unix:passwd.byname home_mailbox = /var/virtual/ mail_spool_directory = /var/spool/mail mailbox_transport = maildrop smtpd_helo_required = yes disable_vrfy_command = yes smtpd_etrn_restrictions = reject smtpd_data_restrictions = reject_unauth_pipelining, permit show_user_unknown_table_name = no proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps $virtual_uid_maps $virtual_gid_maps virtual_alias_domains = message_size_limit = 20971520 transport_maps = proxy:mysql:/etc/postfix/mysql/vdomain.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/vmailbox.cf virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/mailman/aliases virtual_uid_maps = proxy:mysql:/etc/postfix/mysql/vuid.cf virtual_gid_maps = proxy:mysql:/etc/postfix/mysql/vgid.cf virtual_mailbox_base = / virtual_mailbox_limit = 209715200 virtual_mailbox_extended = yes virtual_create_maildirsize = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql/vmlimit.cf virtual_mailbox_limit_override = yes virtual_mailbox_limit_inbox = no virtual_overquote_bounce = yes virtual_minimum_uid = 1 maximal_queue_lifetime = 1d bounce_queue_lifetime = 4h delay_warning_time = 1h append_dot_mydomain = no qmgr_message_active_limit = 500 broken_sasl_auth_clients = yes smtpd_sasl_path = private/auth smtpd_sasl_local_domain = $myhostname smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes smtp_bind_address = 142.46.193.6 relay_domains = $mydestination mynetworks = 127.0.0.0, 142.46.193.0/25 inet_interfaces = all inet_protocols = all And here is the master.cf from postfix: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} spfpolicy unix - n n - - spawn user=nobody argv=/usr/bin/perl /usr/sbin/postfix-policyd-spf-perl smtp-amavis unix - - n - 4 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes #127.0.0.1:10025 inet n - n - - smtpd dovecot unix - n n - - pipe flags=DRhu user=dovecot:21pever1lcha0s argv=/usr/lib/dovecot/deliver -d ${recipient Here is Dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_path = /etc/dovecot/logs/err info_log_path = /etc/dovecot/logs/info log_timestamp = "%Y-%m-%d %H:%M:%S ". syslog_facility = mail ssl_listen = 142.46.193.6 ssl_disable = no ssl_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem ssl_key_file = /etc/ssl/private/ssl-cert-snakeoil.key mail_location = mbox:~/mail:INBOX=/var/virtual/%d/mail/%u mail_privileged_group = mail mail_debug = yes protocol imap { login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/gdbhelper /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/imap imap_max_line_length = 65536 mail_max_userip_connections = 20 mail_plugin_dir = /usr/lib/dovecot/modules/imap login_greeting_capability = yes } protocol pop3 { login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_enable_last = no pop3_uidl_format = %08Xu%08Xv mail_max_userip_connections = 10 mail_plugin_dir = /usr/lib/dovecot/modules/pop3 } protocol managesieve { sieve=~/.dovecot.sieve sieve_storage=~/sieve } mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_executable = /usr/lib/dovecot/dovecot-auth auth_process_size = 256 auth_cache_ttl = 3600 auth_cache_negative_ttl = 3600 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth_worker_max_count = 60 auth_failure_delay = 2 auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } master { path = /var/run/dovecot/auth-master mode = 0600 } } } Please, if you require anything do not hesistate, I will post it ASAP. Any help or suggestions are greatly appreciated! Thanks, Pierre

  Read the article

• SSL certificate: unable to get local issuer certificate

  - by celwell

  I'm running Debian (Lenny). When I run this: curl --ssl https://www.google.com I get this error: curl: (60) SSL certificate problem: unable to get local issuer certificate More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option.

  Read the article

• Multiple client connecting to master MySQL over SSL

  - by Bastien974

  I successfully configured a MySQL replication over SSL between 2 servers accross the internet. Now I want a second server in the same location as the replication slave, to open a connection to the master db over ssl. I used the same command found here http://dev.mysql.com/doc/refman/5.1/en/secure-create-certs.html to generate a new set of client-cert.pem and client-key.pem with the same master db ca-cert/key.pem and I also used a different Common Name. When I try to initiate a connection between this new server and the master db, it fails : mysql -hmasterdb -utestssl -p --ssl-ca=/var/lib/mysql/newcerts/ca-cert.pem --ssl-cert=/var/lib/mysql/newcerts/client-cert.pem --ssl-key=/var/lib/mysql/newcerts/client-key.pem ERROR 2026 (HY000): SSL connection error It's working without SSL.

  Read the article

• Dovecot and StartSSL problems with issuer

  - by knoim

  I am using dovecot (1) and trying to get my StartSSL certificate running. ssl_key_file points to my private key I tried pointing ssl_cert_file to my public key, with and without using the class1 certificate from http://www.startssl.com/certs/sub.class1.server.ca.pem as ssl_ca_file aswell as combing them with cat publickey sub.class1.server.ca.pem chained My mail client keeps telling me the certificate has no issuer, but doing openssl x509 on my public certificate tells me it is C=IL, O=StartCom Ltd., OU=Secure Digital Certificate Signing, CN=StartCom Class 1 Primary Intermediate Server CA My option for the CSR were: openssl req -new -newkey rsa:4096 -nodes Dovecot's log doesn't mention any problems. EDIT: Doesn't seem to be a problem with dovecot. I am having the same problem with postfix. openssl verify gives me the same error.

  Read the article

• stop apache from asking for SSL password each restart

  - by acidzombie24

  Using instructions from this site but varying them just a little i created a CA using -newca, i copied cacert.pem to my comp and imported as trusted issuer in IE. I then did -newreq and -sign (note: i do /full/path/CA.sh -cmd and not sh CA.sh -cmd) and moved the cert and key to apache. I visited the site in IE and using .NET code and it appears trusted, great (unless i write www. in front which is expected). But every time i restart apache i need to type in my password for the site(s?). How can i make it so i DO NOT need to type in the password?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >